arch/arm/boot/dts/omap3-sbc-t3517.dts

   1 /*
   2  * Suppport for CompuLab SBC-T3517 with CM-T3517
   3  */
   4
   5 #include "omap3-cm-t3517.dts"
   6 #include "omap3-sb-t35.dtsi"
   7
   8 / {
   9         model = "CompuLab SBC-T3517 with CM-T3517";
  10         compatible = "compulab,omap3-sbc-t3517", "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";
  11
  12         aliases {
  13                 display0 = &dvi0;
  14                 display1 = &tv0;
  15         };
  16
  17         /* Only one GPMC smsc9220 on SBC-T3517, CM-T3517 uses am35x Ethernet */
  18         vddvario: regulator-vddvario-sb-t35 {
  19                 compatible = "regulator-fixed";
  20                 regulator-name = "vddvario";
  21                 regulator-always-on;
  22         };
  23
  24         vdd33a: regulator-vdd33a-sb-t35 {
  25                 compatible = "regulator-fixed";
  26                 regulator-name = "vdd33a";
  27                 regulator-always-on;
  28         };
  29 };
  30
  31 &omap3_pmx_core {
  32         pinctrl-names = "default";
  33         pinctrl-0 = <
  34                         &sb_t35_usb_hub_pins
  35                         &usb_hub_pins
  36                     >;
  37
  38         mmc1_aux_pins: pinmux_mmc1_aux_pins {
  39                 pinctrl-single,pins = <
  40                         OMAP3_CORE1_IOPAD(0x20c0, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_clk.gpio_59   */
  41                         OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE4) /* uart2_cts.gpio_144 */
  42                 >;
  43         };
  44
  45         sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins {
  46                 pinctrl-single,pins = <
  47                         OMAP3_CORE1_IOPAD(0x21ec, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_98 - SB-T35 USB HUB RST */
  48                 >;
  49         };
  50 };
  51
  52 &mmc1 {
  53         pinctrl-names = "default";
  54         pinctrl-0 = <
  55                 &mmc1_pins
  56                 &mmc1_aux_pins
  57         >;
  58
  59         wp-gpios =  <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio_59  */
  60         cd-gpios =  <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */
  61 };
  62
  63 &dss {
  64         port {
  65                 dpi_out: endpoint {
  66                         remote-endpoint = <&tfp410_in>;
  67                         data-lines = <24>;
  68                 };
  69         };
  70 };
  71
  72 &gpmc {
  73         ranges = <4 0 0x2d000000 0x01000000>,   /* SB-T35 SMSC9x Eth */
  74                  <0 0 0x00000000 0x01000000>;   /* CM-T3x NAND */
  75 };