Merge remote-tracking branch 'regulator/fix/core' into regulator-linus
[deliverable/linux.git] / arch / arm / boot / dts / omap3-sbc-t3517.dts
1 /*
2 * Suppport for CompuLab SBC-T3517 with CM-T3517
3 */
4
5 #include "omap3-cm-t3517.dts"
6 #include "omap3-sb-t35.dtsi"
7
8 / {
9 model = "CompuLab SBC-T3517 with CM-T3517";
10 compatible = "compulab,omap3-sbc-t3517", "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";
11
12 /* Only one GPMC smsc9220 on SBC-T3517, CM-T3517 uses am35x Ethernet */
13 vddvario: regulator-vddvario-sb-t35 {
14 compatible = "regulator-fixed";
15 regulator-name = "vddvario";
16 regulator-always-on;
17 };
18
19 vdd33a: regulator-vdd33a-sb-t35 {
20 compatible = "regulator-fixed";
21 regulator-name = "vdd33a";
22 regulator-always-on;
23 };
24 };
25
26 &omap3_pmx_core {
27 pinctrl-names = "default";
28 pinctrl-0 = <
29 &sb_t35_usb_hub_pins
30 &usb_hub_pins
31 >;
32
33 mmc1_aux_pins: pinmux_mmc1_aux_pins {
34 pinctrl-single,pins = <
35 OMAP3_CORE1_IOPAD(0x20c0, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_clk.gpio_59 */
36 OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE4) /* uart2_cts.gpio_144 */
37 >;
38 };
39
40 sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins {
41 pinctrl-single,pins = <
42 OMAP3_CORE1_IOPAD(0x21ec, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_98 - SB-T35 USB HUB RST */
43 >;
44 };
45 };
46
47 &mmc1 {
48 pinctrl-names = "default";
49 pinctrl-0 = <
50 &mmc1_pins
51 &mmc1_aux_pins
52 >;
53
54 wp-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio_59 */
55 cd-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */
56 };
This page took 0.033946 seconds and 6 git commands to generate.