projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git...
[deliverable/linux.git] / arch / arm / boot / dts / omap5.dtsi
1 /*
2 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 * Based on "omap4.dtsi"
8 */
9
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/interrupt-controller/arm-gic.h>
12 #include <dt-bindings/pinctrl/omap.h>
13
14 #include "skeleton.dtsi"
15
16 / {
17 #address-cells = <1>;
18 #size-cells = <1>;
19
20 compatible = "ti,omap5";
21 interrupt-parent = <&wakeupgen>;
22
23 aliases {
24 i2c0 = &i2c1;
25 i2c1 = &i2c2;
26 i2c2 = &i2c3;
27 i2c3 = &i2c4;
28 i2c4 = &i2c5;
29 serial0 = &uart1;
30 serial1 = &uart2;
31 serial2 = &uart3;
32 serial3 = &uart4;
33 serial4 = &uart5;
34 serial5 = &uart6;
35 };
36
37 cpus {
38 #address-cells = <1>;
39 #size-cells = <0>;
40
41 cpu0: cpu@0 {
42 device_type = "cpu";
43 compatible = "arm,cortex-a15";
44 reg = <0x0>;
45
46 operating-points = <
47 /* kHz uV */
48 1000000 1060000
49 1500000 1250000
50 >;
51
52 clocks = <&dpll_mpu_ck>;
53 clock-names = "cpu";
54
55 clock-latency = <300000>; /* From omap-cpufreq driver */
56
57 /* cooling options */
58 cooling-min-level = <0>;
59 cooling-max-level = <2>;
60 #cooling-cells = <2>; /* min followed by max */
61 };
62 cpu@1 {
63 device_type = "cpu";
64 compatible = "arm,cortex-a15";
65 reg = <0x1>;
66 };
67 };
68
69 thermal-zones {
70 #include "omap4-cpu-thermal.dtsi"
71 #include "omap5-gpu-thermal.dtsi"
72 #include "omap5-core-thermal.dtsi"
73 };
74
75 timer {
76 compatible = "arm,armv7-timer";
77 /* PPI secure/nonsecure IRQ */
78 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
79 <GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
80 <GIC_PPI 11 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
81 <GIC_PPI 10 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>;
82 interrupt-parent = <&gic>;
83 };
84
85 pmu {
86 compatible = "arm,cortex-a15-pmu";
87 interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
88 <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
89 };
90
91 gic: interrupt-controller@48211000 {
92 compatible = "arm,cortex-a15-gic";
93 interrupt-controller;
94 #interrupt-cells = <3>;
95 reg = <0x48211000 0x1000>,
96 <0x48212000 0x1000>,
97 <0x48214000 0x2000>,
98 <0x48216000 0x2000>;
99 interrupt-parent = <&gic>;
100 };
101
102 wakeupgen: interrupt-controller@48281000 {
103 compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
104 interrupt-controller;
105 #interrupt-cells = <3>;
106 reg = <0x48281000 0x1000>;
107 interrupt-parent = <&gic>;
108 };
109
110 /*
111 * The soc node represents the soc top level view. It is used for IPs
112 * that are not memory mapped in the MPU view or for the MPU itself.
113 */
114 soc {
115 compatible = "ti,omap-infra";
116 mpu {
117 compatible = "ti,omap4-mpu";
118 ti,hwmods = "mpu";
119 sram = <&ocmcram>;
120 };
121 };
122
123 /*
124 * XXX: Use a flat representation of the OMAP3 interconnect.
125 * The real OMAP interconnect network is quite complex.
126 * Since it will not bring real advantage to represent that in DT for
127 * the moment, just use a fake OCP bus entry to represent the whole bus
128 * hierarchy.
129 */
130 ocp {
131 compatible = "ti,omap5-l3-noc", "simple-bus";
132 #address-cells = <1>;
133 #size-cells = <1>;
134 ranges;
135 ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
136 reg = <0x44000000 0x2000>,
137 <0x44800000 0x3000>,
138 <0x45000000 0x4000>;
139 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
140 <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
141
142 l4_cfg: l4@4a000000 {
143 compatible = "ti,omap5-l4-cfg", "simple-bus";
144 #address-cells = <1>;
145 #size-cells = <1>;
146 ranges = <0 0x4a000000 0x22a000>;
147
148 scm_core: scm@2000 {
149 compatible = "ti,omap5-scm-core", "simple-bus";
150 reg = <0x2000 0x1000>;
151 #address-cells = <1>;
152 #size-cells = <1>;
153 ranges = <0 0x2000 0x800>;
154
155 scm_conf: scm_conf@0 {
156 compatible = "syscon";
157 reg = <0x0 0x800>;
158 #address-cells = <1>;
159 #size-cells = <1>;
160 };
161 };
162
163 scm_padconf_core: scm@2800 {
164 compatible = "ti,omap5-scm-padconf-core",
165 "simple-bus";
166 #address-cells = <1>;
167 #size-cells = <1>;
168 ranges = <0 0x2800 0x800>;
169
170 omap5_pmx_core: pinmux@40 {
171 compatible = "ti,omap5-padconf",
172 "pinctrl-single";
173 reg = <0x40 0x01b6>;
174 #address-cells = <1>;
175 #size-cells = <0>;
176 #interrupt-cells = <1>;
177 interrupt-controller;
178 pinctrl-single,register-width = <16>;
179 pinctrl-single,function-mask = <0x7fff>;
180 };
181
182 omap5_padconf_global: omap5_padconf_global@5a0 {
183 compatible = "syscon",
184 "simple-bus";
185 reg = <0x5a0 0xec>;
186 #address-cells = <1>;
187 #size-cells = <1>;
188 ranges = <0 0x5a0 0xec>;
189
190 pbias_regulator: pbias_regulator {
191 compatible = "ti,pbias-omap5", "ti,pbias-omap";
192 reg = <0x60 0x4>;
193 syscon = <&omap5_padconf_global>;
194 pbias_mmc_reg: pbias_mmc_omap5 {
195 regulator-name = "pbias_mmc_omap5";
196 regulator-min-microvolt = <1800000>;
197 regulator-max-microvolt = <3000000>;
198 };
199 };
200 };
201 };
202
203 cm_core_aon: cm_core_aon@4000 {
204 compatible = "ti,omap5-cm-core-aon";
205 reg = <0x4000 0x2000>;
206
207 cm_core_aon_clocks: clocks {
208 #address-cells = <1>;
209 #size-cells = <0>;
210 };
211
212 cm_core_aon_clockdomains: clockdomains {
213 };
214 };
215
216 cm_core: cm_core@8000 {
217 compatible = "ti,omap5-cm-core";
218 reg = <0x8000 0x3000>;
219
220 cm_core_clocks: clocks {
221 #address-cells = <1>;
222 #size-cells = <0>;
223 };
224
225 cm_core_clockdomains: clockdomains {
226 };
227 };
228 };
229
230 l4_wkup: l4@4ae00000 {
231 compatible = "ti,omap5-l4-wkup", "simple-bus";
232 #address-cells = <1>;
233 #size-cells = <1>;
234 ranges = <0 0x4ae00000 0x2b000>;
235
236 counter32k: counter@4000 {
237 compatible = "ti,omap-counter32k";
238 reg = <0x4000 0x40>;
239 ti,hwmods = "counter_32k";
240 };
241
242 prm: prm@6000 {
243 compatible = "ti,omap5-prm";
244 reg = <0x6000 0x3000>;
245 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
246
247 prm_clocks: clocks {
248 #address-cells = <1>;
249 #size-cells = <0>;
250 };
251
252 prm_clockdomains: clockdomains {
253 };
254 };
255
256 scrm: scrm@a000 {
257 compatible = "ti,omap5-scrm";
258 reg = <0xa000 0x2000>;
259
260 scrm_clocks: clocks {
261 #address-cells = <1>;
262 #size-cells = <0>;
263 };
264
265 scrm_clockdomains: clockdomains {
266 };
267 };
268
269 omap5_pmx_wkup: pinmux@c840 {
270 compatible = "ti,omap5-padconf",
271 "pinctrl-single";
272 reg = <0xc840 0x0038>;
273 #address-cells = <1>;
274 #size-cells = <0>;
275 #interrupt-cells = <1>;
276 interrupt-controller;
277 pinctrl-single,register-width = <16>;
278 pinctrl-single,function-mask = <0x7fff>;
279 };
280 };
281
282 ocmcram: ocmcram@40300000 {
283 compatible = "mmio-sram";
284 reg = <0x40300000 0x20000>; /* 128k */
285 };
286
287 sdma: dma-controller@4a056000 {
288 compatible = "ti,omap4430-sdma";
289 reg = <0x4a056000 0x1000>;
290 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
291 <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
292 <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
293 <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
294 #dma-cells = <1>;
295 dma-channels = <32>;
296 dma-requests = <127>;
297 };
298
299 gpio1: gpio@4ae10000 {
300 compatible = "ti,omap4-gpio";
301 reg = <0x4ae10000 0x200>;
302 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
303 ti,hwmods = "gpio1";
304 ti,gpio-always-on;
305 gpio-controller;
306 #gpio-cells = <2>;
307 interrupt-controller;
308 #interrupt-cells = <2>;
309 };
310
311 gpio2: gpio@48055000 {
312 compatible = "ti,omap4-gpio";
313 reg = <0x48055000 0x200>;
314 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
315 ti,hwmods = "gpio2";
316 gpio-controller;
317 #gpio-cells = <2>;
318 interrupt-controller;
319 #interrupt-cells = <2>;
320 };
321
322 gpio3: gpio@48057000 {
323 compatible = "ti,omap4-gpio";
324 reg = <0x48057000 0x200>;
325 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
326 ti,hwmods = "gpio3";
327 gpio-controller;
328 #gpio-cells = <2>;
329 interrupt-controller;
330 #interrupt-cells = <2>;
331 };
332
333 gpio4: gpio@48059000 {
334 compatible = "ti,omap4-gpio";
335 reg = <0x48059000 0x200>;
336 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
337 ti,hwmods = "gpio4";
338 gpio-controller;
339 #gpio-cells = <2>;
340 interrupt-controller;
341 #interrupt-cells = <2>;
342 };
343
344 gpio5: gpio@4805b000 {
345 compatible = "ti,omap4-gpio";
346 reg = <0x4805b000 0x200>;
347 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
348 ti,hwmods = "gpio5";
349 gpio-controller;
350 #gpio-cells = <2>;
351 interrupt-controller;
352 #interrupt-cells = <2>;
353 };
354
355 gpio6: gpio@4805d000 {
356 compatible = "ti,omap4-gpio";
357 reg = <0x4805d000 0x200>;
358 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
359 ti,hwmods = "gpio6";
360 gpio-controller;
361 #gpio-cells = <2>;
362 interrupt-controller;
363 #interrupt-cells = <2>;
364 };
365
366 gpio7: gpio@48051000 {
367 compatible = "ti,omap4-gpio";
368 reg = <0x48051000 0x200>;
369 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
370 ti,hwmods = "gpio7";
371 gpio-controller;
372 #gpio-cells = <2>;
373 interrupt-controller;
374 #interrupt-cells = <2>;
375 };
376
377 gpio8: gpio@48053000 {
378 compatible = "ti,omap4-gpio";
379 reg = <0x48053000 0x200>;
380 interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
381 ti,hwmods = "gpio8";
382 gpio-controller;
383 #gpio-cells = <2>;
384 interrupt-controller;
385 #interrupt-cells = <2>;
386 };
387
388 gpmc: gpmc@50000000 {
389 compatible = "ti,omap4430-gpmc";
390 reg = <0x50000000 0x1000>;
391 #address-cells = <2>;
392 #size-cells = <1>;
393 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
394 gpmc,num-cs = <8>;
395 gpmc,num-waitpins = <4>;
396 ti,hwmods = "gpmc";
397 clocks = <&l3_iclk_div>;
398 clock-names = "fck";
399 };
400
401 i2c1: i2c@48070000 {
402 compatible = "ti,omap4-i2c";
403 reg = <0x48070000 0x100>;
404 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
405 #address-cells = <1>;
406 #size-cells = <0>;
407 ti,hwmods = "i2c1";
408 };
409
410 i2c2: i2c@48072000 {
411 compatible = "ti,omap4-i2c";
412 reg = <0x48072000 0x100>;
413 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
414 #address-cells = <1>;
415 #size-cells = <0>;
416 ti,hwmods = "i2c2";
417 };
418
419 i2c3: i2c@48060000 {
420 compatible = "ti,omap4-i2c";
421 reg = <0x48060000 0x100>;
422 interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
423 #address-cells = <1>;
424 #size-cells = <0>;
425 ti,hwmods = "i2c3";
426 };
427
428 i2c4: i2c@4807a000 {
429 compatible = "ti,omap4-i2c";
430 reg = <0x4807a000 0x100>;
431 interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
432 #address-cells = <1>;
433 #size-cells = <0>;
434 ti,hwmods = "i2c4";
435 };
436
437 i2c5: i2c@4807c000 {
438 compatible = "ti,omap4-i2c";
439 reg = <0x4807c000 0x100>;
440 interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
441 #address-cells = <1>;
442 #size-cells = <0>;
443 ti,hwmods = "i2c5";
444 };
445
446 hwspinlock: spinlock@4a0f6000 {
447 compatible = "ti,omap4-hwspinlock";
448 reg = <0x4a0f6000 0x1000>;
449 ti,hwmods = "spinlock";
450 #hwlock-cells = <1>;
451 };
452
453 mcspi1: spi@48098000 {
454 compatible = "ti,omap4-mcspi";
455 reg = <0x48098000 0x200>;
456 interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
457 #address-cells = <1>;
458 #size-cells = <0>;
459 ti,hwmods = "mcspi1";
460 ti,spi-num-cs = <4>;
461 dmas = <&sdma 35>,
462 <&sdma 36>,
463 <&sdma 37>,
464 <&sdma 38>,
465 <&sdma 39>,
466 <&sdma 40>,
467 <&sdma 41>,
468 <&sdma 42>;
469 dma-names = "tx0", "rx0", "tx1", "rx1",
470 "tx2", "rx2", "tx3", "rx3";
471 };
472
473 mcspi2: spi@4809a000 {
474 compatible = "ti,omap4-mcspi";
475 reg = <0x4809a000 0x200>;
476 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
477 #address-cells = <1>;
478 #size-cells = <0>;
479 ti,hwmods = "mcspi2";
480 ti,spi-num-cs = <2>;
481 dmas = <&sdma 43>,
482 <&sdma 44>,
483 <&sdma 45>,
484 <&sdma 46>;
485 dma-names = "tx0", "rx0", "tx1", "rx1";
486 };
487
488 mcspi3: spi@480b8000 {
489 compatible = "ti,omap4-mcspi";
490 reg = <0x480b8000 0x200>;
491 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
492 #address-cells = <1>;
493 #size-cells = <0>;
494 ti,hwmods = "mcspi3";
495 ti,spi-num-cs = <2>;
496 dmas = <&sdma 15>, <&sdma 16>;
497 dma-names = "tx0", "rx0";
498 };
499
500 mcspi4: spi@480ba000 {
501 compatible = "ti,omap4-mcspi";
502 reg = <0x480ba000 0x200>;
503 interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
504 #address-cells = <1>;
505 #size-cells = <0>;
506 ti,hwmods = "mcspi4";
507 ti,spi-num-cs = <1>;
508 dmas = <&sdma 70>, <&sdma 71>;
509 dma-names = "tx0", "rx0";
510 };
511
512 uart1: serial@4806a000 {
513 compatible = "ti,omap4-uart";
514 reg = <0x4806a000 0x100>;
515 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
516 ti,hwmods = "uart1";
517 clock-frequency = <48000000>;
518 };
519
520 uart2: serial@4806c000 {
521 compatible = "ti,omap4-uart";
522 reg = <0x4806c000 0x100>;
523 interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
524 ti,hwmods = "uart2";
525 clock-frequency = <48000000>;
526 };
527
528 uart3: serial@48020000 {
529 compatible = "ti,omap4-uart";
530 reg = <0x48020000 0x100>;
531 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
532 ti,hwmods = "uart3";
533 clock-frequency = <48000000>;
534 };
535
536 uart4: serial@4806e000 {
537 compatible = "ti,omap4-uart";
538 reg = <0x4806e000 0x100>;
539 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
540 ti,hwmods = "uart4";
541 clock-frequency = <48000000>;
542 };
543
544 uart5: serial@48066000 {
545 compatible = "ti,omap4-uart";
546 reg = <0x48066000 0x100>;
547 interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
548 ti,hwmods = "uart5";
549 clock-frequency = <48000000>;
550 };
551
552 uart6: serial@48068000 {
553 compatible = "ti,omap4-uart";
554 reg = <0x48068000 0x100>;
555 interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
556 ti,hwmods = "uart6";
557 clock-frequency = <48000000>;
558 };
559
560 mmc1: mmc@4809c000 {
561 compatible = "ti,omap4-hsmmc";
562 reg = <0x4809c000 0x400>;
563 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
564 ti,hwmods = "mmc1";
565 ti,dual-volt;
566 ti,needs-special-reset;
567 dmas = <&sdma 61>, <&sdma 62>;
568 dma-names = "tx", "rx";
569 pbias-supply = <&pbias_mmc_reg>;
570 };
571
572 mmc2: mmc@480b4000 {
573 compatible = "ti,omap4-hsmmc";
574 reg = <0x480b4000 0x400>;
575 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
576 ti,hwmods = "mmc2";
577 ti,needs-special-reset;
578 dmas = <&sdma 47>, <&sdma 48>;
579 dma-names = "tx", "rx";
580 };
581
582 mmc3: mmc@480ad000 {
583 compatible = "ti,omap4-hsmmc";
584 reg = <0x480ad000 0x400>;
585 interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
586 ti,hwmods = "mmc3";
587 ti,needs-special-reset;
588 dmas = <&sdma 77>, <&sdma 78>;
589 dma-names = "tx", "rx";
590 };
591
592 mmc4: mmc@480d1000 {
593 compatible = "ti,omap4-hsmmc";
594 reg = <0x480d1000 0x400>;
595 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
596 ti,hwmods = "mmc4";
597 ti,needs-special-reset;
598 dmas = <&sdma 57>, <&sdma 58>;
599 dma-names = "tx", "rx";
600 };
601
602 mmc5: mmc@480d5000 {
603 compatible = "ti,omap4-hsmmc";
604 reg = <0x480d5000 0x400>;
605 interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
606 ti,hwmods = "mmc5";
607 ti,needs-special-reset;
608 dmas = <&sdma 59>, <&sdma 60>;
609 dma-names = "tx", "rx";
610 };
611
612 mmu_dsp: mmu@4a066000 {
613 compatible = "ti,omap4-iommu";
614 reg = <0x4a066000 0x100>;
615 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
616 ti,hwmods = "mmu_dsp";
617 #iommu-cells = <0>;
618 };
619
620 mmu_ipu: mmu@55082000 {
621 compatible = "ti,omap4-iommu";
622 reg = <0x55082000 0x100>;
623 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
624 ti,hwmods = "mmu_ipu";
625 #iommu-cells = <0>;
626 ti,iommu-bus-err-back;
627 };
628
629 keypad: keypad@4ae1c000 {
630 compatible = "ti,omap4-keypad";
631 reg = <0x4ae1c000 0x400>;
632 ti,hwmods = "kbd";
633 };
634
635 mcpdm: mcpdm@40132000 {
636 compatible = "ti,omap4-mcpdm";
637 reg = <0x40132000 0x7f>, /* MPU private access */
638 <0x49032000 0x7f>; /* L3 Interconnect */
639 reg-names = "mpu", "dma";
640 interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
641 ti,hwmods = "mcpdm";
642 dmas = <&sdma 65>,
643 <&sdma 66>;
644 dma-names = "up_link", "dn_link";
645 status = "disabled";
646 };
647
648 dmic: dmic@4012e000 {
649 compatible = "ti,omap4-dmic";
650 reg = <0x4012e000 0x7f>, /* MPU private access */
651 <0x4902e000 0x7f>; /* L3 Interconnect */
652 reg-names = "mpu", "dma";
653 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
654 ti,hwmods = "dmic";
655 dmas = <&sdma 67>;
656 dma-names = "up_link";
657 status = "disabled";
658 };
659
660 mcbsp1: mcbsp@40122000 {
661 compatible = "ti,omap4-mcbsp";
662 reg = <0x40122000 0xff>, /* MPU private access */
663 <0x49022000 0xff>; /* L3 Interconnect */
664 reg-names = "mpu", "dma";
665 interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
666 interrupt-names = "common";
667 ti,buffer-size = <128>;
668 ti,hwmods = "mcbsp1";
669 dmas = <&sdma 33>,
670 <&sdma 34>;
671 dma-names = "tx", "rx";
672 status = "disabled";
673 };
674
675 mcbsp2: mcbsp@40124000 {
676 compatible = "ti,omap4-mcbsp";
677 reg = <0x40124000 0xff>, /* MPU private access */
678 <0x49024000 0xff>; /* L3 Interconnect */
679 reg-names = "mpu", "dma";
680 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
681 interrupt-names = "common";
682 ti,buffer-size = <128>;
683 ti,hwmods = "mcbsp2";
684 dmas = <&sdma 17>,
685 <&sdma 18>;
686 dma-names = "tx", "rx";
687 status = "disabled";
688 };
689
690 mcbsp3: mcbsp@40126000 {
691 compatible = "ti,omap4-mcbsp";
692 reg = <0x40126000 0xff>, /* MPU private access */
693 <0x49026000 0xff>; /* L3 Interconnect */
694 reg-names = "mpu", "dma";
695 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
696 interrupt-names = "common";
697 ti,buffer-size = <128>;
698 ti,hwmods = "mcbsp3";
699 dmas = <&sdma 19>,
700 <&sdma 20>;
701 dma-names = "tx", "rx";
702 status = "disabled";
703 };
704
705 mailbox: mailbox@4a0f4000 {
706 compatible = "ti,omap4-mailbox";
707 reg = <0x4a0f4000 0x200>;
708 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
709 ti,hwmods = "mailbox";
710 #mbox-cells = <1>;
711 ti,mbox-num-users = <3>;
712 ti,mbox-num-fifos = <8>;
713 mbox_ipu: mbox_ipu {
714 ti,mbox-tx = <0 0 0>;
715 ti,mbox-rx = <1 0 0>;
716 };
717 mbox_dsp: mbox_dsp {
718 ti,mbox-tx = <3 0 0>;
719 ti,mbox-rx = <2 0 0>;
720 };
721 };
722
723 timer1: timer@4ae18000 {
724 compatible = "ti,omap5430-timer";
725 reg = <0x4ae18000 0x80>;
726 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
727 ti,hwmods = "timer1";
728 ti,timer-alwon;
729 };
730
731 timer2: timer@48032000 {
732 compatible = "ti,omap5430-timer";
733 reg = <0x48032000 0x80>;
734 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
735 ti,hwmods = "timer2";
736 };
737
738 timer3: timer@48034000 {
739 compatible = "ti,omap5430-timer";
740 reg = <0x48034000 0x80>;
741 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
742 ti,hwmods = "timer3";
743 };
744
745 timer4: timer@48036000 {
746 compatible = "ti,omap5430-timer";
747 reg = <0x48036000 0x80>;
748 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
749 ti,hwmods = "timer4";
750 };
751
752 timer5: timer@40138000 {
753 compatible = "ti,omap5430-timer";
754 reg = <0x40138000 0x80>,
755 <0x49038000 0x80>;
756 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
757 ti,hwmods = "timer5";
758 ti,timer-dsp;
759 ti,timer-pwm;
760 };
761
762 timer6: timer@4013a000 {
763 compatible = "ti,omap5430-timer";
764 reg = <0x4013a000 0x80>,
765 <0x4903a000 0x80>;
766 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
767 ti,hwmods = "timer6";
768 ti,timer-dsp;
769 ti,timer-pwm;
770 };
771
772 timer7: timer@4013c000 {
773 compatible = "ti,omap5430-timer";
774 reg = <0x4013c000 0x80>,
775 <0x4903c000 0x80>;
776 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
777 ti,hwmods = "timer7";
778 ti,timer-dsp;
779 };
780
781 timer8: timer@4013e000 {
782 compatible = "ti,omap5430-timer";
783 reg = <0x4013e000 0x80>,
784 <0x4903e000 0x80>;
785 interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
786 ti,hwmods = "timer8";
787 ti,timer-dsp;
788 ti,timer-pwm;
789 };
790
791 timer9: timer@4803e000 {
792 compatible = "ti,omap5430-timer";
793 reg = <0x4803e000 0x80>;
794 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
795 ti,hwmods = "timer9";
796 ti,timer-pwm;
797 };
798
799 timer10: timer@48086000 {
800 compatible = "ti,omap5430-timer";
801 reg = <0x48086000 0x80>;
802 interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
803 ti,hwmods = "timer10";
804 ti,timer-pwm;
805 };
806
807 timer11: timer@48088000 {
808 compatible = "ti,omap5430-timer";
809 reg = <0x48088000 0x80>;
810 interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
811 ti,hwmods = "timer11";
812 ti,timer-pwm;
813 };
814
815 wdt2: wdt@4ae14000 {
816 compatible = "ti,omap5-wdt", "ti,omap3-wdt";
817 reg = <0x4ae14000 0x80>;
818 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
819 ti,hwmods = "wd_timer2";
820 };
821
822 dmm@4e000000 {
823 compatible = "ti,omap5-dmm";
824 reg = <0x4e000000 0x800>;
825 interrupts = <0 113 0x4>;
826 ti,hwmods = "dmm";
827 };
828
829 emif1: emif@4c000000 {
830 compatible = "ti,emif-4d5";
831 ti,hwmods = "emif1";
832 ti,no-idle-on-init;
833 phy-type = <2>; /* DDR PHY type: Intelli PHY */
834 reg = <0x4c000000 0x400>;
835 interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
836 hw-caps-read-idle-ctrl;
837 hw-caps-ll-interface;
838 hw-caps-temp-alert;
839 };
840
841 emif2: emif@4d000000 {
842 compatible = "ti,emif-4d5";
843 ti,hwmods = "emif2";
844 ti,no-idle-on-init;
845 phy-type = <2>; /* DDR PHY type: Intelli PHY */
846 reg = <0x4d000000 0x400>;
847 interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
848 hw-caps-read-idle-ctrl;
849 hw-caps-ll-interface;
850 hw-caps-temp-alert;
851 };
852
853 omap_control_usb2phy: control-phy@4a002300 {
854 compatible = "ti,control-phy-usb2";
855 reg = <0x4a002300 0x4>;
856 reg-names = "power";
857 };
858
859 omap_control_usb3phy: control-phy@4a002370 {
860 compatible = "ti,control-phy-pipe3";
861 reg = <0x4a002370 0x4>;
862 reg-names = "power";
863 };
864
865 usb3: omap_dwc3@4a020000 {
866 compatible = "ti,dwc3";
867 ti,hwmods = "usb_otg_ss";
868 reg = <0x4a020000 0x10000>;
869 interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
870 #address-cells = <1>;
871 #size-cells = <1>;
872 utmi-mode = <2>;
873 ranges;
874 dwc3@4a030000 {
875 compatible = "snps,dwc3";
876 reg = <0x4a030000 0x10000>;
877 interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
878 <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
879 <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
880 interrupt-names = "peripheral",
881 "host",
882 "otg";
883 phys = <&usb2_phy>, <&usb3_phy>;
884 phy-names = "usb2-phy", "usb3-phy";
885 dr_mode = "peripheral";
886 tx-fifo-resize;
887 };
888 };
889
890 ocp2scp@4a080000 {
891 compatible = "ti,omap-ocp2scp";
892 #address-cells = <1>;
893 #size-cells = <1>;
894 reg = <0x4a080000 0x20>;
895 ranges;
896 ti,hwmods = "ocp2scp1";
897 usb2_phy: usb2phy@4a084000 {
898 compatible = "ti,omap-usb2";
899 reg = <0x4a084000 0x7c>;
900 ctrl-module = <&omap_control_usb2phy>;
901 clocks = <&usb_phy_cm_clk32k>, <&usb_otg_ss_refclk960m>;
902 clock-names = "wkupclk", "refclk";
903 #phy-cells = <0>;
904 };
905
906 usb3_phy: usb3phy@4a084400 {
907 compatible = "ti,omap-usb3";
908 reg = <0x4a084400 0x80>,
909 <0x4a084800 0x64>,
910 <0x4a084c00 0x40>;
911 reg-names = "phy_rx", "phy_tx", "pll_ctrl";
912 ctrl-module = <&omap_control_usb3phy>;
913 clocks = <&usb_phy_cm_clk32k>,
914 <&sys_clkin>,
915 <&usb_otg_ss_refclk960m>;
916 clock-names = "wkupclk",
917 "sysclk",
918 "refclk";
919 #phy-cells = <0>;
920 };
921 };
922
923 usbhstll: usbhstll@4a062000 {
924 compatible = "ti,usbhs-tll";
925 reg = <0x4a062000 0x1000>;
926 interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
927 ti,hwmods = "usb_tll_hs";
928 };
929
930 usbhshost: usbhshost@4a064000 {
931 compatible = "ti,usbhs-host";
932 reg = <0x4a064000 0x800>;
933 ti,hwmods = "usb_host_hs";
934 #address-cells = <1>;
935 #size-cells = <1>;
936 ranges;
937 clocks = <&l3init_60m_fclk>,
938 <&xclk60mhsp1_ck>,
939 <&xclk60mhsp2_ck>;
940 clock-names = "refclk_60m_int",
941 "refclk_60m_ext_p1",
942 "refclk_60m_ext_p2";
943
944 usbhsohci: ohci@4a064800 {
945 compatible = "ti,ohci-omap3";
946 reg = <0x4a064800 0x400>;
947 interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
948 };
949
950 usbhsehci: ehci@4a064c00 {
951 compatible = "ti,ehci-omap";
952 reg = <0x4a064c00 0x400>;
953 interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
954 };
955 };
956
957 bandgap: bandgap@4a0021e0 {
958 reg = <0x4a0021e0 0xc
959 0x4a00232c 0xc
960 0x4a002380 0x2c
961 0x4a0023C0 0x3c>;
962 interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
963 compatible = "ti,omap5430-bandgap";
964
965 #thermal-sensor-cells = <1>;
966 };
967
968 omap_control_sata: control-phy@4a002374 {
969 compatible = "ti,control-phy-pipe3";
970 reg = <0x4a002374 0x4>;
971 reg-names = "power";
972 clocks = <&sys_clkin>;
973 clock-names = "sysclk";
974 };
975
976 /* OCP2SCP3 */
977 ocp2scp@4a090000 {
978 compatible = "ti,omap-ocp2scp";
979 #address-cells = <1>;
980 #size-cells = <1>;
981 reg = <0x4a090000 0x20>;
982 ranges;
983 ti,hwmods = "ocp2scp3";
984 sata_phy: phy@4a096000 {
985 compatible = "ti,phy-pipe3-sata";
986 reg = <0x4A096000 0x80>, /* phy_rx */
987 <0x4A096400 0x64>, /* phy_tx */
988 <0x4A096800 0x40>; /* pll_ctrl */
989 reg-names = "phy_rx", "phy_tx", "pll_ctrl";
990 ctrl-module = <&omap_control_sata>;
991 clocks = <&sys_clkin>, <&sata_ref_clk>;
992 clock-names = "sysclk", "refclk";
993 #phy-cells = <0>;
994 };
995 };
996
997 sata: sata@4a141100 {
998 compatible = "snps,dwc-ahci";
999 reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
1000 interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
1001 phys = <&sata_phy>;
1002 phy-names = "sata-phy";
1003 clocks = <&sata_ref_clk>;
1004 ti,hwmods = "sata";
1005 };
1006
1007 dss: dss@58000000 {
1008 compatible = "ti,omap5-dss";
1009 reg = <0x58000000 0x80>;
1010 status = "disabled";
1011 ti,hwmods = "dss_core";
1012 clocks = <&dss_dss_clk>;
1013 clock-names = "fck";
1014 #address-cells = <1>;
1015 #size-cells = <1>;
1016 ranges;
1017
1018 dispc@58001000 {
1019 compatible = "ti,omap5-dispc";
1020 reg = <0x58001000 0x1000>;
1021 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
1022 ti,hwmods = "dss_dispc";
1023 clocks = <&dss_dss_clk>;
1024 clock-names = "fck";
1025 };
1026
1027 rfbi: encoder@58002000 {
1028 compatible = "ti,omap5-rfbi";
1029 reg = <0x58002000 0x100>;
1030 status = "disabled";
1031 ti,hwmods = "dss_rfbi";
1032 clocks = <&dss_dss_clk>, <&l3_iclk_div>;
1033 clock-names = "fck", "ick";
1034 };
1035
1036 dsi1: encoder@58004000 {
1037 compatible = "ti,omap5-dsi";
1038 reg = <0x58004000 0x200>,
1039 <0x58004200 0x40>,
1040 <0x58004300 0x40>;
1041 reg-names = "proto", "phy", "pll";
1042 interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
1043 status = "disabled";
1044 ti,hwmods = "dss_dsi1";
1045 clocks = <&dss_dss_clk>, <&dss_sys_clk>;
1046 clock-names = "fck", "sys_clk";
1047 };
1048
1049 dsi2: encoder@58005000 {
1050 compatible = "ti,omap5-dsi";
1051 reg = <0x58009000 0x200>,
1052 <0x58009200 0x40>,
1053 <0x58009300 0x40>;
1054 reg-names = "proto", "phy", "pll";
1055 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
1056 status = "disabled";
1057 ti,hwmods = "dss_dsi2";
1058 clocks = <&dss_dss_clk>, <&dss_sys_clk>;
1059 clock-names = "fck", "sys_clk";
1060 };
1061
1062 hdmi: encoder@58060000 {
1063 compatible = "ti,omap5-hdmi";
1064 reg = <0x58040000 0x200>,
1065 <0x58040200 0x80>,
1066 <0x58040300 0x80>,
1067 <0x58060000 0x19000>;
1068 reg-names = "wp", "pll", "phy", "core";
1069 interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
1070 status = "disabled";
1071 ti,hwmods = "dss_hdmi";
1072 clocks = <&dss_48mhz_clk>, <&dss_sys_clk>;
1073 clock-names = "fck", "sys_clk";
1074 dmas = <&sdma 76>;
1075 dma-names = "audio_tx";
1076 };
1077 };
1078
1079 abb_mpu: regulator-abb-mpu {
1080 compatible = "ti,abb-v2";
1081 regulator-name = "abb_mpu";
1082 #address-cells = <0>;
1083 #size-cells = <0>;
1084 clocks = <&sys_clkin>;
1085 ti,settling-time = <50>;
1086 ti,clock-cycles = <16>;
1087
1088 reg = <0x4ae07cdc 0x8>, <0x4ae06014 0x4>,
1089 <0x4a0021c4 0x8>, <0x4ae0c318 0x4>;
1090 reg-names = "base-address", "int-address",
1091 "efuse-address", "ldo-address";
1092 ti,tranxdone-status-mask = <0x80>;
1093 /* LDOVBBMPU_MUX_CTRL */
1094 ti,ldovbb-override-mask = <0x400>;
1095 /* LDOVBBMPU_VSET_OUT */
1096 ti,ldovbb-vset-mask = <0x1F>;
1097
1098 /*
1099 * NOTE: only FBB mode used but actual vset will
1100 * determine final biasing
1101 */
1102 ti,abb_info = <
1103 /*uV ABB efuse rbb_m fbb_m vset_m*/
1104 1060000 0 0x0 0 0x02000000 0x01F00000
1105 1250000 0 0x4 0 0x02000000 0x01F00000
1106 >;
1107 };
1108
1109 abb_mm: regulator-abb-mm {
1110 compatible = "ti,abb-v2";
1111 regulator-name = "abb_mm";
1112 #address-cells = <0>;
1113 #size-cells = <0>;
1114 clocks = <&sys_clkin>;
1115 ti,settling-time = <50>;
1116 ti,clock-cycles = <16>;
1117
1118 reg = <0x4ae07ce4 0x8>, <0x4ae06010 0x4>,
1119 <0x4a0021a4 0x8>, <0x4ae0c314 0x4>;
1120 reg-names = "base-address", "int-address",
1121 "efuse-address", "ldo-address";
1122 ti,tranxdone-status-mask = <0x80000000>;
1123 /* LDOVBBMM_MUX_CTRL */
1124 ti,ldovbb-override-mask = <0x400>;
1125 /* LDOVBBMM_VSET_OUT */
1126 ti,ldovbb-vset-mask = <0x1F>;
1127
1128 /*
1129 * NOTE: only FBB mode used but actual vset will
1130 * determine final biasing
1131 */
1132 ti,abb_info = <
1133 /*uV ABB efuse rbb_m fbb_m vset_m*/
1134 1025000 0 0x0 0 0x02000000 0x01F00000
1135 1120000 0 0x4 0 0x02000000 0x01F00000
1136 >;
1137 };
1138 };
1139 };
1140
1141 &cpu_thermal {
1142 polling-delay = <500>; /* milliseconds */
1143 };
1144
1145 /include/ "omap54xx-clocks.dtsi"
Linux kernel - Deliverables
This page took 0.11398 seconds and 5 git commands to generate.