Merge remote-tracking branch 'tip/auto-latest'
[deliverable/linux.git] / arch / arm / boot / dts / ste-hrefprev60.dtsi
1 /*
2 * Copyright 2012 ST-Ericsson AB
3 *
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
7 *
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
10 *
11 * Device Tree for the HREF+ prior to the v60 variant.
12 */
13
14 #include "ste-dbx5x0.dtsi"
15 #include "ste-href-ab8500.dtsi"
16 #include "ste-href.dtsi"
17
18 / {
19 gpio_keys {
20 button@1 {
21 gpios = <&tc3589x_gpio 7 GPIO_ACTIVE_HIGH>;
22 };
23 };
24
25 soc {
26 /* Enable UART1 on this board */
27 uart@80121000 {
28 status = "okay";
29 };
30
31 i2c@80004000 {
32 tps61052@33 {
33 compatible = "tps61052";
34 reg = <0x33>;
35 };
36
37 tc35892@42 {
38 compatible = "toshiba,tc35892";
39 reg = <0x42>;
40 interrupt-parent = <&gpio6>;
41 interrupts = <25 IRQ_TYPE_EDGE_RISING>;
42 pinctrl-names = "default";
43 pinctrl-0 = <&tc35892_hrefprev60_mode>;
44
45 interrupt-controller;
46 #interrupt-cells = <1>;
47
48 tc3589x_gpio: tc3589x_gpio {
49 compatible = "tc3589x-gpio";
50 interrupts = <0>;
51
52 interrupt-controller;
53 #interrupt-cells = <2>;
54 gpio-controller;
55 #gpio-cells = <2>;
56 };
57 };
58 };
59
60 ssp@80002000 {
61 /*
62 * On the first generation boards, this SSP/SPI port was connected
63 * to the AB8500.
64 */
65 pinctrl-names = "default";
66 pinctrl-0 = <&ssp0_hrefprev60_mode>;
67 };
68
69 // External Micro SD slot
70 sdi0_per1@80126000 {
71 cd-gpios = <&tc3589x_gpio 3 GPIO_ACTIVE_HIGH>;
72 };
73
74 vmmci: regulator-gpio {
75 gpios = <&tc3589x_gpio 18 GPIO_ACTIVE_HIGH>;
76 enable-gpio = <&tc3589x_gpio 17 GPIO_ACTIVE_HIGH>;
77 };
78
79 pinctrl {
80 /* Set this up using hogs */
81 pinctrl-names = "default";
82 pinctrl-0 = <&ipgpio_hrefprev60_mode>;
83
84 ssp0 {
85 ssp0_hrefprev60_mode: ssp0_hrefprev60_default {
86 hrefprev60_mux {
87 function = "ssp0";
88 groups = "ssp0_a_1";
89 };
90 hrefprev60_cfg1 {
91 pins = "GPIO145_C13"; /* RXD */
92 ste,config = <&in_pd>;
93 };
94
95 };
96 };
97 sdi0 {
98 /* This additional pin needed on early MOP500 and HREFs previous to v60 */
99 sdi0_default_mode: sdi0_default {
100 hrefprev60_mux {
101 function = "mc0";
102 groups = "mc0dat31dir_a_1";
103 };
104 hrefprev60_cfg1 {
105 pins = "GPIO21_AB3"; /* DAT31DIR */
106 ste,config = <&out_hi>;
107 };
108
109 };
110 };
111 tc35892 {
112 tc35892_hrefprev60_mode: tc35892_hrefprev60 {
113 hrefprev60_cfg {
114 pins = "GPIO217_AH12";
115 ste,config = <&gpio_in_pu>;
116 };
117 };
118 };
119 ipgpio {
120 ipgpio_hrefprev60_mode: ipgpio_hrefprev60 {
121 hrefprev60_mux {
122 function = "ipgpio";
123 groups = "ipgpio0_c_1", "ipgpio1_c_1";
124 };
125 hrefprev60_cfg1 {
126 pins = "GPIO6_AF6", "GPIO7_AG5";
127 ste,config = <&in_pu>;
128 };
129 };
130 };
131 };
132 };
133 };
This page took 0.054743 seconds and 5 git commands to generate.