arch/arm/boot/dts/sun4i-a10-a1000.dts

   1 /*
   2  * Copyright 2013 Emilio López
   3  *
   4  * Emilio López <emilio@elopez.com.ar>
   5  *
   6  * This file is dual-licensed: you can use it either under the terms
   7  * of the GPL or the X11 license, at your option. Note that this dual
   8  * licensing only applies to this file, and not this project as a
   9  * whole.
  10  *
  11  *  a) This file is free software; you can redistribute it and/or
  12  *     modify it under the terms of the GNU General Public License as
  13  *     published by the Free Software Foundation; either version 2 of the
  14  *     License, or (at your option) any later version.
  15  *
  16  *     This file is distributed in the hope that it will be useful,
  17  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19  *     GNU General Public License for more details.
  20  *
  21  * Or, alternatively,
  22  *
  23  *  b) Permission is hereby granted, free of charge, to any person
  24  *     obtaining a copy of this software and associated documentation
  25  *     files (the "Software"), to deal in the Software without
  26  *     restriction, including without limitation the rights to use,
  27  *     copy, modify, merge, publish, distribute, sublicense, and/or
  28  *     sell copies of the Software, and to permit persons to whom the
  29  *     Software is furnished to do so, subject to the following
  30  *     conditions:
  31  *
  32  *     The above copyright notice and this permission notice shall be
  33  *     included in all copies or substantial portions of the Software.
  34  *
  35  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  36  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  37  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  38  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  39  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  40  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  41  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  42  *     OTHER DEALINGS IN THE SOFTWARE.
  43  */
  44
  45 /dts-v1/;
  46 #include "sun4i-a10.dtsi"
  47 #include "sunxi-common-regulators.dtsi"
  48
  49 #include <dt-bindings/gpio/gpio.h>
  50 #include <dt-bindings/pinctrl/sun4i-a10.h>
  51
  52 / {
  53         model = "Mele A1000";
  54         compatible = "mele,a1000", "allwinner,sun4i-a10";
  55
  56         aliases {
  57                 serial0 = &uart0;
  58         };
  59
  60         chosen {
  61                 stdout-path = "serial0:115200n8";
  62         };
  63
  64         leds {
  65                 compatible = "gpio-leds";
  66                 pinctrl-names = "default";
  67                 pinctrl-0 = <&led_pins_a1000>;
  68
  69                 red {
  70                         label = "a1000:red:usr";
  71                         gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>;
  72                 };
  73
  74                 blue {
  75                         label = "a1000:blue:usr";
  76                         gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
  77                 };
  78         };
  79
  80         reg_emac_3v3: emac-3v3 {
  81                 compatible = "regulator-fixed";
  82                 pinctrl-names = "default";
  83                 pinctrl-0 = <&emac_power_pin_a1000>;
  84                 regulator-name = "emac-3v3";
  85                 regulator-min-microvolt = <3300000>;
  86                 regulator-max-microvolt = <3300000>;
  87                 enable-active-high;
  88                 gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>;
  89         };
  90 };
  91
  92 &ahci {
  93         status = "okay";
  94 };
  95
  96 &codec {
  97         status = "okay";
  98 };
  99
 100 &ehci0 {
 101         status = "okay";
 102 };
 103
 104 &ehci1 {
 105         status = "okay";
 106 };
 107
 108 &emac {
 109         pinctrl-names = "default";
 110         pinctrl-0 = <&emac_pins_a>;
 111         phy = <&phy1>;
 112         status = "okay";
 113 };
 114
 115 &emac_sram {
 116         status = "okay";
 117 };
 118
 119 &i2c0 {
 120         pinctrl-names = "default";
 121         pinctrl-0 = <&i2c0_pins_a>;
 122         status = "okay";
 123
 124         axp209: pmic@34 {
 125                 compatible = "x-powers,axp209";
 126                 reg = <0x34>;
 127                 interrupts = <0>;
 128
 129                 interrupt-controller;
 130                 #interrupt-cells = <1>;
 131         };
 132 };
 133
 134 &ir0 {
 135         pinctrl-names = "default";
 136         pinctrl-0 = <&ir0_rx_pins_a>;
 137         status = "okay";
 138 };
 139
 140 &mdio {
 141         phy-supply = <&reg_emac_3v3>;
 142         status = "okay";
 143
 144         phy1: ethernet-phy@1 {
 145                 reg = <1>;
 146         };
 147 };
 148
 149 &mmc0 {
 150         pinctrl-names = "default";
 151         pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
 152         vmmc-supply = <&reg_vcc3v3>;
 153         bus-width = <4>;
 154         cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
 155         cd-inverted;
 156         status = "okay";
 157 };
 158
 159 &ohci0 {
 160         status = "okay";
 161 };
 162
 163 &ohci1 {
 164         status = "okay";
 165 };
 166
 167 &pio {
 168         emac_power_pin_a1000: emac_power_pin@0 {
 169                 allwinner,pins = "PH15";
 170                 allwinner,function = "gpio_out";
 171                 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 172                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 173         };
 174
 175         led_pins_a1000: led_pins@0 {
 176                 allwinner,pins = "PH10", "PH20";
 177                 allwinner,function = "gpio_out";
 178                 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 179                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 180         };
 181 };
 182
 183 &reg_usb1_vbus {
 184         status = "okay";
 185 };
 186
 187 &reg_usb2_vbus {
 188         status = "okay";
 189 };
 190
 191 &uart0 {
 192         pinctrl-names = "default";
 193         pinctrl-0 = <&uart0_pins_a>;
 194         status = "okay";
 195 };
 196
 197 &usbphy {
 198         usb1_vbus-supply = <&reg_usb1_vbus>;
 199         usb2_vbus-supply = <&reg_usb2_vbus>;
 200         status = "okay";
 201 };