arch/arm/boot/dts/sun4i-a10-inet97fv2.dts

   1 /*
   2  * Copyright 2014 Open Source Support GmbH
   3  *
   4  * David Lanzendörfer <david.lanzendoerfer@o2s.ch>
   5  *
   6  * This file is dual-licensed: you can use it either under the terms
   7  * of the GPL or the X11 license, at your option. Note that this dual
   8  * licensing only applies to this file, and not this project as a
   9  * whole.
  10  *
  11  *  a) This file is free software; you can redistribute it and/or
  12  *     modify it under the terms of the GNU General Public License as
  13  *     published by the Free Software Foundation; either version 2 of the
  14  *     License, or (at your option) any later version.
  15  *
  16  *     This file is distributed in the hope that it will be useful,
  17  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19  *     GNU General Public License for more details.
  20  *
  21  *     You should have received a copy of the GNU General Public
  22  *     License along with this file; if not, write to the Free
  23  *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
  24  *     MA 02110-1301 USA
  25  *
  26  * Or, alternatively,
  27  *
  28  *  b) Permission is hereby granted, free of charge, to any person
  29  *     obtaining a copy of this software and associated documentation
  30  *     files (the "Software"), to deal in the Software without
  31  *     restriction, including without limitation the rights to use,
  32  *     copy, modify, merge, publish, distribute, sublicense, and/or
  33  *     sell copies of the Software, and to permit persons to whom the
  34  *     Software is furnished to do so, subject to the following
  35  *     conditions:
  36  *
  37  *     The above copyright notice and this permission notice shall be
  38  *     included in all copies or substantial portions of the Software.
  39  *
  40  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  41  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  42  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  43  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  44  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  45  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  46  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  47  *     OTHER DEALINGS IN THE SOFTWARE.
  48  */
  49
  50 /dts-v1/;
  51 /include/ "sun4i-a10.dtsi"
  52 /include/ "sunxi-common-regulators.dtsi"
  53
  54 / {
  55         model = "INet-97F Rev 02";
  56         compatible = "primux,inet97fv2", "allwinner,sun4i-a10";
  57
  58         aliases {
  59                 serial0 = &uart0;
  60         };
  61
  62         soc@01c00000 {
  63                 mmc0: mmc@01c0f000 {
  64                         pinctrl-names = "default";
  65                         pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
  66                         vmmc-supply = <&reg_vcc3v3>;
  67                         bus-width = <4>;
  68                         cd-gpios = <&pio 7 1 0>; /* PH1 */
  69                         cd-inverted;
  70                         status = "okay";
  71                 };
  72
  73                 uart0: serial@01c28000 {
  74                         pinctrl-names = "default";
  75                         pinctrl-0 = <&uart0_pins_a>;
  76                         status = "okay";
  77                 };
  78
  79                 usbphy: phy@01c13400 {
  80                         usb1_vbus-supply = <&reg_usb1_vbus>;
  81                         usb2_vbus-supply = <&reg_usb2_vbus>;
  82                         status = "okay";
  83                 };
  84
  85                 ehci0: usb@01c14000 {
  86                         status = "okay";
  87                 };
  88
  89                 ohci0: usb@01c14400 {
  90                         status = "okay";
  91                 };
  92
  93                 ehci1: usb@01c1c000 {
  94                         status = "okay";
  95                 };
  96
  97                 ohci1: usb@01c1c400 {
  98                         status = "okay";
  99                 };
 100
 101                 i2c0: i2c@01c2ac00 {
 102                         pinctrl-names = "default";
 103                         pinctrl-0 = <&i2c0_pins_a>;
 104                         status = "okay";
 105
 106                         axp209: pmic@34 {
 107                                 compatible = "x-powers,axp209";
 108                                 reg = <0x34>;
 109                                 interrupts = <0>;
 110
 111                                 interrupt-controller;
 112                                 #interrupt-cells = <1>;
 113                         };
 114                 };
 115         };
 116
 117         reg_usb1_vbus: usb1-vbus {
 118                 status = "okay";
 119         };
 120
 121         reg_usb2_vbus: usb2-vbus {
 122                 status = "okay";
 123         };
 124 };