2 * Copyright 2013 Maxime Ripard
4 * Maxime Ripard <maxime.ripard@free-electrons.com>
6 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
8 * licensing only applies to this file, and not this project as a
11 * a) This file is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of the
14 * License, or (at your option) any later version.
16 * This file is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
21 * You should have received a copy of the GNU General Public
22 * License along with this file; if not, write to the Free
23 * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
28 * b) Permission is hereby granted, free of charge, to any person
29 * obtaining a copy of this software and associated documentation
30 * files (the "Software"), to deal in the Software without
31 * restriction, including without limitation the rights to use,
32 * copy, modify, merge, publish, distribute, sublicense, and/or
33 * sell copies of the Software, and to permit persons to whom the
34 * Software is furnished to do so, subject to the following
37 * The above copyright notice and this permission notice shall be
38 * included in all copies or substantial portions of the Software.
40 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
41 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
42 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
43 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
44 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
45 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
46 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
47 * OTHER DEALINGS IN THE SOFTWARE.
51 /include/ "sun5i-a10s.dtsi"
52 /include/ "sunxi-common-regulators.dtsi"
55 model = "Olimex A10s-Olinuxino Micro";
56 compatible = "olimex,a10s-olinuxino-micro", "allwinner,sun5i-a10s";
65 emac: ethernet@01c0b000 {
66 pinctrl-names = "default";
67 pinctrl-0 = <&emac_pins_a>;
75 phy1: ethernet-phy@1 {
81 pinctrl-names = "default";
82 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>;
83 vmmc-supply = <®_vcc3v3>;
85 cd-gpios = <&pio 6 1 0>; /* PG1 */
91 pinctrl-names = "default";
92 pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>;
93 vmmc-supply = <®_vcc3v3>;
95 cd-gpios = <&pio 6 13 0>; /* PG13 */
100 usbphy: phy@01c13400 {
101 usb1_vbus-supply = <®_usb1_vbus>;
105 ehci0: usb@01c14000 {
109 ohci0: usb@01c14400 {
114 mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 {
115 allwinner,pins = "PG1";
116 allwinner,function = "gpio_in";
117 allwinner,drive = <0>;
118 allwinner,pull = <1>;
121 mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 {
122 allwinner,pins = "PG13";
123 allwinner,function = "gpio_in";
124 allwinner,drive = <0>;
125 allwinner,pull = <1>;
128 led_pins_olinuxino: led_pins@0 {
129 allwinner,pins = "PE3";
130 allwinner,function = "gpio_out";
131 allwinner,drive = <1>;
132 allwinner,pull = <0>;
135 usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 {
136 allwinner,pins = "PB10";
137 allwinner,function = "gpio_out";
138 allwinner,drive = <0>;
139 allwinner,pull = <0>;
143 uart0: serial@01c28000 {
144 pinctrl-names = "default";
145 pinctrl-0 = <&uart0_pins_a>;
149 uart2: serial@01c28800 {
150 pinctrl-names = "default";
151 pinctrl-0 = <&uart2_pins_a>;
155 uart3: serial@01c28c00 {
156 pinctrl-names = "default";
157 pinctrl-0 = <&uart3_pins_a>;
162 pinctrl-names = "default";
163 pinctrl-0 = <&i2c0_pins_a>;
168 pinctrl-names = "default";
169 pinctrl-0 = <&i2c1_pins_a>;
173 compatible = "at,24c16";
181 pinctrl-names = "default";
182 pinctrl-0 = <&i2c2_pins_a>;
188 compatible = "gpio-leds";
189 pinctrl-names = "default";
190 pinctrl-0 = <&led_pins_olinuxino>;
193 label = "a10s-olinuxino-micro:green:usr";
194 gpios = <&pio 4 3 0>;
195 default-state = "on";
199 reg_usb1_vbus: usb1-vbus {
200 pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>;
201 gpio = <&pio 1 10 0>;