2 * Copyright 2012 Maxime Ripard <maxime.ripard@free-electrons.com>
3 * Copyright 2013 Hans de Goede <hdegoede@redhat.com>
5 * This file is dual-licensed: you can use it either under the terms
6 * of the GPL or the X11 license, at your option. Note that this dual
7 * licensing only applies to this file, and not this project as a
10 * a) This file is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License as
12 * published by the Free Software Foundation; either version 2 of the
13 * License, or (at your option) any later version.
15 * This file is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 * You should have received a copy of the GNU General Public
21 * License along with this file; if not, write to the Free
22 * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
27 * b) Permission is hereby granted, free of charge, to any person
28 * obtaining a copy of this software and associated documentation
29 * files (the "Software"), to deal in the Software without
30 * restriction, including without limitation the rights to use,
31 * copy, modify, merge, publish, distribute, sublicense, and/or
32 * sell copies of the Software, and to permit persons to whom the
33 * Software is furnished to do so, subject to the following
36 * The above copyright notice and this permission notice shall be
37 * included in all copies or substantial portions of the Software.
39 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
40 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
41 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
42 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
43 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
44 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
45 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
46 * OTHER DEALINGS IN THE SOFTWARE.
50 /include/ "sun5i-a13.dtsi"
51 /include/ "sunxi-common-regulators.dtsi"
54 model = "Olimex A13-Olinuxino Micro";
55 compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13";
59 pinctrl-names = "default";
60 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>;
61 vmmc-supply = <®_vcc3v3>;
63 cd-gpios = <&pio 6 0 0>; /* PG0 */
68 usbphy: phy@01c13400 {
69 usb1_vbus-supply = <®_usb1_vbus>;
82 mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 {
83 allwinner,pins = "PG0";
84 allwinner,function = "gpio_in";
85 allwinner,drive = <0>;
89 led_pins_olinuxinom: led_pins@0 {
90 allwinner,pins = "PG9";
91 allwinner,function = "gpio_out";
92 allwinner,drive = <1>;
96 usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 {
97 allwinner,pins = "PG11";
98 allwinner,function = "gpio_out";
99 allwinner,drive = <0>;
100 allwinner,pull = <0>;
104 uart1: serial@01c28400 {
105 pinctrl-names = "default";
106 pinctrl-0 = <&uart1_pins_b>;
111 pinctrl-names = "default";
112 pinctrl-0 = <&i2c0_pins_a>;
117 pinctrl-names = "default";
118 pinctrl-0 = <&i2c1_pins_a>;
123 pinctrl-names = "default";
124 pinctrl-0 = <&i2c2_pins_a>;
130 compatible = "gpio-leds";
131 pinctrl-names = "default";
132 pinctrl-0 = <&led_pins_olinuxinom>;
135 label = "a13-olinuxino-micro:green:power";
136 gpios = <&pio 6 9 0>;
137 default-state = "on";
141 reg_usb1_vbus: usb1-vbus {
142 pinctrl-0 = <&usb1_vbus_pin_olinuxinom>;
143 gpio = <&pio 6 11 0>;