ARM: ux500: enable AB8500 GPIO for HREF
[deliverable/linux.git] / arch / arm / boot / dts / tny_a9260_common.dtsi
1 /*
2 * tny_a9260_common.dtsi - Device Tree file for Caloa TNY A926x board
3 *
4 * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5 *
6 * Licensed under GPLv2.
7 */
8
9 / {
10 chosen {
11 bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock6 rw rootfstype=ubifs";
12 };
13
14 memory {
15 reg = <0x20000000 0x4000000>;
16 };
17
18 clocks {
19 #address-cells = <1>;
20 #size-cells = <1>;
21 ranges;
22
23 main_clock: clock@0 {
24 compatible = "atmel,osc", "fixed-clock";
25 clock-frequency = <12000000>;
26 };
27 };
28
29 ahb {
30 apb {
31 dbgu: serial@fffff200 {
32 status = "okay";
33 };
34 };
35
36 nand0: nand@40000000 {
37 nand-bus-width = <8>;
38 nand-ecc-mode = "soft";
39 nand-on-flash-bbt;
40 status = "okay";
41
42 at91bootstrap@0 {
43 label = "at91bootstrap";
44 reg = <0x0 0x20000>;
45 };
46
47 barebox@20000 {
48 label = "barebox";
49 reg = <0x20000 0x40000>;
50 };
51
52 bareboxenv@60000 {
53 label = "bareboxenv";
54 reg = <0x60000 0x20000>;
55 };
56
57 bareboxenv2@80000 {
58 label = "bareboxenv2";
59 reg = <0x80000 0x20000>;
60 };
61
62 oftree@80000 {
63 label = "oftree";
64 reg = <0xa0000 0x20000>;
65 };
66
67 kernel@a0000 {
68 label = "kernel";
69 reg = <0xc0000 0x400000>;
70 };
71
72 rootfs@4a0000 {
73 label = "rootfs";
74 reg = <0x4c0000 0x7800000>;
75 };
76
77 data@7ca0000 {
78 label = "data";
79 reg = <0x7cc0000 0x8340000>;
80 };
81 };
82 };
83 };
This page took 0.032038 seconds and 5 git commands to generate.