arch/arm/boot/dts/zynq-7000.dtsi

   1 /*
   2  *  Copyright (C) 2011 - 2014 Xilinx
   3  *
   4  * This software is licensed under the terms of the GNU General Public
   5  * License version 2, as published by the Free Software Foundation, and
   6  * may be copied, distributed, and modified under those terms.
   7  *
   8  * This program is distributed in the hope that it will be useful,
   9  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  10  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  11  * GNU General Public License for more details.
  12  */
  13 /include/ "skeleton.dtsi"
  14
  15 / {
  16         compatible = "xlnx,zynq-7000";
  17
  18         cpus {
  19                 #address-cells = <1>;
  20                 #size-cells = <0>;
  21
  22                 cpu@0 {
  23                         compatible = "arm,cortex-a9";
  24                         device_type = "cpu";
  25                         reg = <0>;
  26                         clocks = <&clkc 3>;
  27                         clock-latency = <1000>;
  28                         cpu0-supply = <&regulator_vccpint>;
  29                         operating-points = <
  30                                 /* kHz    uV */
  31                                 666667  1000000
  32                                 333334  1000000
  33                         >;
  34                 };
  35
  36                 cpu@1 {
  37                         compatible = "arm,cortex-a9";
  38                         device_type = "cpu";
  39                         reg = <1>;
  40                         clocks = <&clkc 3>;
  41                 };
  42         };
  43
  44         pmu {
  45                 compatible = "arm,cortex-a9-pmu";
  46                 interrupts = <0 5 4>, <0 6 4>;
  47                 interrupt-parent = <&intc>;
  48                 reg = < 0xf8891000 0x1000 0xf8893000 0x1000 >;
  49         };
  50
  51         regulator_vccpint: fixedregulator@0 {
  52                 compatible = "regulator-fixed";
  53                 regulator-name = "VCCPINT";
  54                 regulator-min-microvolt = <1000000>;
  55                 regulator-max-microvolt = <1000000>;
  56                 regulator-boot-on;
  57                 regulator-always-on;
  58         };
  59
  60         amba: amba {
  61                 compatible = "simple-bus";
  62                 #address-cells = <1>;
  63                 #size-cells = <1>;
  64                 interrupt-parent = <&intc>;
  65                 ranges;
  66
  67                 adc: adc@f8007100 {
  68                         compatible = "xlnx,zynq-xadc-1.00.a";
  69                         reg = <0xf8007100 0x20>;
  70                         interrupts = <0 7 4>;
  71                         interrupt-parent = <&intc>;
  72                         clocks = <&clkc 12>;
  73                 };
  74
  75                 can0: can@e0008000 {
  76                         compatible = "xlnx,zynq-can-1.0";
  77                         status = "disabled";
  78                         clocks = <&clkc 19>, <&clkc 36>;
  79                         clock-names = "can_clk", "pclk";
  80                         reg = <0xe0008000 0x1000>;
  81                         interrupts = <0 28 4>;
  82                         interrupt-parent = <&intc>;
  83                         tx-fifo-depth = <0x40>;
  84                         rx-fifo-depth = <0x40>;
  85                 };
  86
  87                 can1: can@e0009000 {
  88                         compatible = "xlnx,zynq-can-1.0";
  89                         status = "disabled";
  90                         clocks = <&clkc 20>, <&clkc 37>;
  91                         clock-names = "can_clk", "pclk";
  92                         reg = <0xe0009000 0x1000>;
  93                         interrupts = <0 51 4>;
  94                         interrupt-parent = <&intc>;
  95                         tx-fifo-depth = <0x40>;
  96                         rx-fifo-depth = <0x40>;
  97                 };
  98
  99                 gpio0: gpio@e000a000 {
 100                         compatible = "xlnx,zynq-gpio-1.0";
 101                         #gpio-cells = <2>;
 102                         clocks = <&clkc 42>;
 103                         gpio-controller;
 104                         interrupt-parent = <&intc>;
 105                         interrupts = <0 20 4>;
 106                         reg = <0xe000a000 0x1000>;
 107                 };
 108
 109                 i2c0: i2c@e0004000 {
 110                         compatible = "cdns,i2c-r1p10";
 111                         status = "disabled";
 112                         clocks = <&clkc 38>;
 113                         interrupt-parent = <&intc>;
 114                         interrupts = <0 25 4>;
 115                         reg = <0xe0004000 0x1000>;
 116                         #address-cells = <1>;
 117                         #size-cells = <0>;
 118                 };
 119
 120                 i2c1: i2c@e0005000 {
 121                         compatible = "cdns,i2c-r1p10";
 122                         status = "disabled";
 123                         clocks = <&clkc 39>;
 124                         interrupt-parent = <&intc>;
 125                         interrupts = <0 48 4>;
 126                         reg = <0xe0005000 0x1000>;
 127                         #address-cells = <1>;
 128                         #size-cells = <0>;
 129                 };
 130
 131                 intc: interrupt-controller@f8f01000 {
 132                         compatible = "arm,cortex-a9-gic";
 133                         #interrupt-cells = <3>;
 134                         interrupt-controller;
 135                         reg = <0xF8F01000 0x1000>,
 136                               <0xF8F00100 0x100>;
 137                 };
 138
 139                 L2: cache-controller@f8f02000 {
 140                         compatible = "arm,pl310-cache";
 141                         reg = <0xF8F02000 0x1000>;
 142                         interrupts = <0 2 4>;
 143                         arm,data-latency = <3 2 2>;
 144                         arm,tag-latency = <2 2 2>;
 145                         cache-unified;
 146                         cache-level = <2>;
 147                 };
 148
 149                 mc: memory-controller@f8006000 {
 150                         compatible = "xlnx,zynq-ddrc-a05";
 151                         reg = <0xf8006000 0x1000>;
 152                 };
 153
 154                 uart0: serial@e0000000 {
 155                         compatible = "xlnx,xuartps", "cdns,uart-r1p8";
 156                         status = "disabled";
 157                         clocks = <&clkc 23>, <&clkc 40>;
 158                         clock-names = "uart_clk", "pclk";
 159                         reg = <0xE0000000 0x1000>;
 160                         interrupts = <0 27 4>;
 161                 };
 162
 163                 uart1: serial@e0001000 {
 164                         compatible = "xlnx,xuartps", "cdns,uart-r1p8";
 165                         status = "disabled";
 166                         clocks = <&clkc 24>, <&clkc 41>;
 167                         clock-names = "uart_clk", "pclk";
 168                         reg = <0xE0001000 0x1000>;
 169                         interrupts = <0 50 4>;
 170                 };
 171
 172                 spi0: spi@e0006000 {
 173                         compatible = "xlnx,zynq-spi-r1p6";
 174                         reg = <0xe0006000 0x1000>;
 175                         status = "disabled";
 176                         interrupt-parent = <&intc>;
 177                         interrupts = <0 26 4>;
 178                         clocks = <&clkc 25>, <&clkc 34>;
 179                         clock-names = "ref_clk", "pclk";
 180                         #address-cells = <1>;
 181                         #size-cells = <0>;
 182                 };
 183
 184                 spi1: spi@e0007000 {
 185                         compatible = "xlnx,zynq-spi-r1p6";
 186                         reg = <0xe0007000 0x1000>;
 187                         status = "disabled";
 188                         interrupt-parent = <&intc>;
 189                         interrupts = <0 49 4>;
 190                         clocks = <&clkc 26>, <&clkc 35>;
 191                         clock-names = "ref_clk", "pclk";
 192                         #address-cells = <1>;
 193                         #size-cells = <0>;
 194                 };
 195
 196                 gem0: ethernet@e000b000 {
 197                         compatible = "cdns,zynq-gem", "cdns,gem";
 198                         reg = <0xe000b000 0x1000>;
 199                         status = "disabled";
 200                         interrupts = <0 22 4>;
 201                         clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
 202                         clock-names = "pclk", "hclk", "tx_clk";
 203                         #address-cells = <1>;
 204                         #size-cells = <0>;
 205                 };
 206
 207                 gem1: ethernet@e000c000 {
 208                         compatible = "cdns,zynq-gem", "cdns,gem";
 209                         reg = <0xe000c000 0x1000>;
 210                         status = "disabled";
 211                         interrupts = <0 45 4>;
 212                         clocks = <&clkc 31>, <&clkc 31>, <&clkc 14>;
 213                         clock-names = "pclk", "hclk", "tx_clk";
 214                         #address-cells = <1>;
 215                         #size-cells = <0>;
 216                 };
 217
 218                 sdhci0: sdhci@e0100000 {
 219                         compatible = "arasan,sdhci-8.9a";
 220                         status = "disabled";
 221                         clock-names = "clk_xin", "clk_ahb";
 222                         clocks = <&clkc 21>, <&clkc 32>;
 223                         interrupt-parent = <&intc>;
 224                         interrupts = <0 24 4>;
 225                         reg = <0xe0100000 0x1000>;
 226                 };
 227
 228                 sdhci1: sdhci@e0101000 {
 229                         compatible = "arasan,sdhci-8.9a";
 230                         status = "disabled";
 231                         clock-names = "clk_xin", "clk_ahb";
 232                         clocks = <&clkc 22>, <&clkc 33>;
 233                         interrupt-parent = <&intc>;
 234                         interrupts = <0 47 4>;
 235                         reg = <0xe0101000 0x1000>;
 236                 };
 237
 238                 slcr: slcr@f8000000 {
 239                         #address-cells = <1>;
 240                         #size-cells = <1>;
 241                         compatible = "xlnx,zynq-slcr", "syscon", "simple-bus";
 242                         reg = <0xF8000000 0x1000>;
 243                         ranges;
 244                         clkc: clkc@100 {
 245                                 #clock-cells = <1>;
 246                                 compatible = "xlnx,ps7-clkc";
 247                                 fclk-enable = <0>;
 248                                 clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
 249                                                 "cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
 250                                                 "dci", "lqspi", "smc", "pcap", "gem0", "gem1",
 251                                                 "fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
 252                                                 "sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1",
 253                                                 "dma", "usb0_aper", "usb1_aper", "gem0_aper",
 254                                                 "gem1_aper", "sdio0_aper", "sdio1_aper",
 255                                                 "spi0_aper", "spi1_aper", "can0_aper", "can1_aper",
 256                                                 "i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper",
 257                                                 "gpio_aper", "lqspi_aper", "smc_aper", "swdt",
 258                                                 "dbg_trc", "dbg_apb";
 259                                 reg = <0x100 0x100>;
 260                         };
 261
 262                         rstc: rstc@200 {
 263                                 compatible = "xlnx,zynq-reset";
 264                                 reg = <0x200 0x48>;
 265                                 #reset-cells = <1>;
 266                                 syscon = <&slcr>;
 267                         };
 268
 269                         pinctrl0: pinctrl@700 {
 270                                 compatible = "xlnx,pinctrl-zynq";
 271                                 reg = <0x700 0x200>;
 272                                 syscon = <&slcr>;
 273                         };
 274                 };
 275
 276                 dmac_s: dmac@f8003000 {
 277                         compatible = "arm,pl330", "arm,primecell";
 278                         reg = <0xf8003000 0x1000>;
 279                         interrupt-parent = <&intc>;
 280                         interrupt-names = "abort", "dma0", "dma1", "dma2", "dma3",
 281                                 "dma4", "dma5", "dma6", "dma7";
 282                         interrupts = <0 13 4>,
 283                                      <0 14 4>, <0 15 4>,
 284                                      <0 16 4>, <0 17 4>,
 285                                      <0 40 4>, <0 41 4>,
 286                                      <0 42 4>, <0 43 4>;
 287                         #dma-cells = <1>;
 288                         #dma-channels = <8>;
 289                         #dma-requests = <4>;
 290                         clocks = <&clkc 27>;
 291                         clock-names = "apb_pclk";
 292                 };
 293
 294                 devcfg: devcfg@f8007000 {
 295                         compatible = "xlnx,zynq-devcfg-1.0";
 296                         reg = <0xf8007000 0x100>;
 297                         interrupt-parent = <&intc>;
 298                         interrupts = <0 8 4>;
 299                         clocks = <&clkc 12>;
 300                         clock-names = "ref_clk";
 301                         syscon = <&slcr>;
 302                 };
 303
 304                 global_timer: timer@f8f00200 {
 305                         compatible = "arm,cortex-a9-global-timer";
 306                         reg = <0xf8f00200 0x20>;
 307                         interrupts = <1 11 0x301>;
 308                         interrupt-parent = <&intc>;
 309                         clocks = <&clkc 4>;
 310                 };
 311
 312                 ttc0: timer@f8001000 {
 313                         interrupt-parent = <&intc>;
 314                         interrupts = <0 10 4>, <0 11 4>, <0 12 4>;
 315                         compatible = "cdns,ttc";
 316                         clocks = <&clkc 6>;
 317                         reg = <0xF8001000 0x1000>;
 318                 };
 319
 320                 ttc1: timer@f8002000 {
 321                         interrupt-parent = <&intc>;
 322                         interrupts = <0 37 4>, <0 38 4>, <0 39 4>;
 323                         compatible = "cdns,ttc";
 324                         clocks = <&clkc 6>;
 325                         reg = <0xF8002000 0x1000>;
 326                 };
 327
 328                 scutimer: timer@f8f00600 {
 329                         interrupt-parent = <&intc>;
 330                         interrupts = <1 13 0x301>;
 331                         compatible = "arm,cortex-a9-twd-timer";
 332                         reg = <0xf8f00600 0x20>;
 333                         clocks = <&clkc 4>;
 334                 };
 335
 336                 usb0: usb@e0002000 {
 337                         compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2";
 338                         status = "disabled";
 339                         clocks = <&clkc 28>;
 340                         interrupt-parent = <&intc>;
 341                         interrupts = <0 21 4>;
 342                         reg = <0xe0002000 0x1000>;
 343                         phy_type = "ulpi";
 344                 };
 345
 346                 usb1: usb@e0003000 {
 347                         compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2";
 348                         status = "disabled";
 349                         clocks = <&clkc 29>;
 350                         interrupt-parent = <&intc>;
 351                         interrupts = <0 44 4>;
 352                         reg = <0xe0003000 0x1000>;
 353                         phy_type = "ulpi";
 354                 };
 355
 356                 watchdog0: watchdog@f8005000 {
 357                         clocks = <&clkc 45>;
 358                         compatible = "cdns,wdt-r1p2";
 359                         interrupt-parent = <&intc>;
 360                         interrupts = <0 9 1>;
 361                         reg = <0xf8005000 0x1000>;
 362                         timeout-sec = <10>;
 363                 };
 364         };
 365 };