arch/arm/kernel/hyp-stub.S

   1 /*
   2  * Copyright (c) 2012 Linaro Limited.
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License as published by
   6  * the Free Software Foundation; either version 2 of the License, or
   7  * (at your option) any later version.
   8  *
   9  * This program is distributed in the hope that it will be useful,
  10  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12  * GNU General Public License for more details.
  13  *
  14  * You should have received a copy of the GNU General Public License along
  15  * with this program; if not, write to the Free Software Foundation, Inc.,
  16  * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
  17  */
  18
  19 #include <linux/init.h>
  20 #include <linux/linkage.h>
  21 #include <asm/assembler.h>
  22 #include <asm/virt.h>
  23
  24 #ifndef ZIMAGE
  25 /*
  26  * For the kernel proper, we need to find out the CPU boot mode long after
  27  * boot, so we need to store it in a writable variable.
  28  *
  29  * This is not in .bss, because we set it sufficiently early that the boot-time
  30  * zeroing of .bss would clobber it.
  31  */
  32 .data
  33 ENTRY(__boot_cpu_mode)
  34         .long   0
  35 .text
  36
  37         /*
  38          * Save the primary CPU boot mode. Requires 3 scratch registers.
  39          */
  40         .macro  store_primary_cpu_mode  reg1, reg2, reg3
  41         mrs     \reg1, cpsr
  42         and     \reg1, \reg1, #MODE_MASK
  43         adr     \reg2, .L__boot_cpu_mode_offset
  44         ldr     \reg3, [\reg2]
  45         str     \reg1, [\reg2, \reg3]
  46         .endm
  47
  48         /*
  49          * Compare the current mode with the one saved on the primary CPU.
  50          * If they don't match, record that fact. The Z bit indicates
  51          * if there's a match or not.
  52          * Requires 3 additionnal scratch registers.
  53          */
  54         .macro  compare_cpu_mode_with_primary mode, reg1, reg2, reg3
  55         adr     \reg2, .L__boot_cpu_mode_offset
  56         ldr     \reg3, [\reg2]
  57         ldr     \reg1, [\reg2, \reg3]
  58         cmp     \mode, \reg1            @ matches primary CPU boot mode?
  59         orrne   r7, r7, #BOOT_CPU_MODE_MISMATCH
  60         strne   r7, [r5, r6]            @ record what happened and give up
  61         .endm
  62
  63 #else   /* ZIMAGE */
  64
  65         .macro  store_primary_cpu_mode  reg1:req, reg2:req, reg3:req
  66         .endm
  67
  68 /*
  69  * The zImage loader only runs on one CPU, so we don't bother with mult-CPU
  70  * consistency checking:
  71  */
  72         .macro  compare_cpu_mode_with_primary mode, reg1, reg2, reg3
  73         cmp     \mode, \mode
  74         .endm
  75
  76 #endif /* ZIMAGE */
  77
  78 /*
  79  * Hypervisor stub installation functions.
  80  *
  81  * These must be called with the MMU and D-cache off.
  82  * They are not ABI compliant and are only intended to be called from the kernel
  83  * entry points in head.S.
  84  */
  85 @ Call this from the primary CPU
  86 ENTRY(__hyp_stub_install)
  87         store_primary_cpu_mode  r4, r5, r6
  88 ENDPROC(__hyp_stub_install)
  89
  90         @ fall through...
  91
  92 @ Secondary CPUs should call here
  93 ENTRY(__hyp_stub_install_secondary)
  94         mrs     r4, cpsr
  95         and     r4, r4, #MODE_MASK
  96
  97         /*
  98          * If the secondary has booted with a different mode, give up
  99          * immediately.
 100          */
 101         compare_cpu_mode_with_primary   r4, r5, r6, r7
 102         movne   pc, lr
 103
 104         /*
 105          * Once we have given up on one CPU, we do not try to install the
 106          * stub hypervisor on the remaining ones: because the saved boot mode
 107          * is modified, it can't compare equal to the CPSR mode field any
 108          * more.
 109          *
 110          * Otherwise...
 111          */
 112
 113         cmp     r4, #HYP_MODE
 114         movne   pc, lr                  @ give up if the CPU is not in HYP mode
 115
 116 /*
 117  * Configure HSCTLR to set correct exception endianness/instruction set
 118  * state etc.
 119  * Turn off all traps
 120  * Eventually, CPU-specific code might be needed -- assume not for now
 121  *
 122  * This code relies on the "eret" instruction to synchronize the
 123  * various coprocessor accesses. This is done when we switch to SVC
 124  * (see safe_svcmode_maskall).
 125  */
 126         @ Now install the hypervisor stub:
 127         adr     r7, __hyp_stub_vectors
 128         mcr     p15, 4, r7, c12, c0, 0  @ set hypervisor vector base (HVBAR)
 129
 130         @ Disable all traps, so we don't get any nasty surprise
 131         mov     r7, #0
 132         mcr     p15, 4, r7, c1, c1, 0   @ HCR
 133         mcr     p15, 4, r7, c1, c1, 2   @ HCPTR
 134         mcr     p15, 4, r7, c1, c1, 3   @ HSTR
 135
 136 THUMB(  orr     r7, #(1 << 30)  )       @ HSCTLR.TE
 137 #ifdef CONFIG_CPU_BIG_ENDIAN
 138         orr     r7, #(1 << 9)           @ HSCTLR.EE
 139 #endif
 140         mcr     p15, 4, r7, c1, c0, 0   @ HSCTLR
 141
 142         mrc     p15, 4, r7, c1, c1, 1   @ HDCR
 143         and     r7, #0x1f               @ Preserve HPMN
 144         mcr     p15, 4, r7, c1, c1, 1   @ HDCR
 145
 146 #if !defined(ZIMAGE) && defined(CONFIG_ARM_ARCH_TIMER)
 147         @ make CNTP_* and CNTPCT accessible from PL1
 148         mrc     p15, 0, r7, c0, c1, 1   @ ID_PFR1
 149         lsr     r7, #16
 150         and     r7, #0xf
 151         cmp     r7, #1
 152         bne     1f
 153         mrc     p15, 4, r7, c14, c1, 0  @ CNTHCTL
 154         orr     r7, r7, #3              @ PL1PCEN | PL1PCTEN
 155         mcr     p15, 4, r7, c14, c1, 0  @ CNTHCTL
 156         mov     r7, #0
 157         mcrr    p15, 4, r7, r7, c14     @ CNTVOFF
 158
 159         @ Disable virtual timer in case it was counting
 160         mrc     p15, 0, r7, c14, c3, 1  @ CNTV_CTL
 161         bic     r7, #1                  @ Clear ENABLE
 162         mcr     p15, 0, r7, c14, c3, 1  @ CNTV_CTL
 163 1:
 164 #endif
 165
 166         bx      lr                      @ The boot CPU mode is left in r4.
 167 ENDPROC(__hyp_stub_install_secondary)
 168
 169 __hyp_stub_do_trap:
 170         cmp     r0, #-1
 171         mrceq   p15, 4, r0, c12, c0, 0  @ get HVBAR
 172         mcrne   p15, 4, r0, c12, c0, 0  @ set HVBAR
 173         __ERET
 174 ENDPROC(__hyp_stub_do_trap)
 175
 176 /*
 177  * __hyp_set_vectors: Call this after boot to set the initial hypervisor
 178  * vectors as part of hypervisor installation.  On an SMP system, this should
 179  * be called on each CPU.
 180  *
 181  * r0 must be the physical address of the new vector table (which must lie in
 182  * the bottom 4GB of physical address space.
 183  *
 184  * r0 must be 32-byte aligned.
 185  *
 186  * Before calling this, you must check that the stub hypervisor is installed
 187  * everywhere, by waiting for any secondary CPUs to be brought up and then
 188  * checking that BOOT_CPU_MODE_HAVE_HYP(__boot_cpu_mode) is true.
 189  *
 190  * If not, there is a pre-existing hypervisor, some CPUs failed to boot, or
 191  * something else went wrong... in such cases, trying to install a new
 192  * hypervisor is unlikely to work as desired.
 193  *
 194  * When you call into your shiny new hypervisor, sp_hyp will contain junk,
 195  * so you will need to set that to something sensible at the new hypervisor's
 196  * initialisation entry point.
 197  */
 198 ENTRY(__hyp_get_vectors)
 199         mov     r0, #-1
 200 ENDPROC(__hyp_get_vectors)
 201         @ fall through
 202 ENTRY(__hyp_set_vectors)
 203         __HVC(0)
 204         mov     pc, lr
 205 ENDPROC(__hyp_set_vectors)
 206
 207 #ifndef ZIMAGE
 208 .align 2
 209 .L__boot_cpu_mode_offset:
 210         .long   __boot_cpu_mode - .
 211 #endif
 212
 213 .align 5
 214 __hyp_stub_vectors:
 215 __hyp_stub_reset:       W(b)    .
 216 __hyp_stub_und:         W(b)    .
 217 __hyp_stub_svc:         W(b)    .
 218 __hyp_stub_pabort:      W(b)    .
 219 __hyp_stub_dabort:      W(b)    .
 220 __hyp_stub_trap:        W(b)    __hyp_stub_do_trap
 221 __hyp_stub_irq:         W(b)    .
 222 __hyp_stub_fiq:         W(b)    .
 223 ENDPROC(__hyp_stub_vectors)
 224