arch/arm/mach-davinci/Kconfig

   1 if ARCH_DAVINCI
   2
   3 config AINTC
   4         bool
   5
   6 config CP_INTC
   7         bool
   8
   9 config ARCH_DAVINCI_DMx
  10         select CPU_ARM926T
  11         bool
  12
  13 menu "TI DaVinci Implementations"
  14
  15 comment "DaVinci Core Type"
  16
  17 config ARCH_DAVINCI_DM644x
  18         bool "DaVinci 644x based system"
  19         select AINTC
  20         select ARCH_DAVINCI_DMx
  21
  22 config ARCH_DAVINCI_DM355
  23         bool "DaVinci 355 based system"
  24         select AINTC
  25         select ARCH_DAVINCI_DMx
  26
  27 config ARCH_DAVINCI_DM646x
  28         bool "DaVinci 646x based system"
  29         select AINTC
  30         select ARCH_DAVINCI_DMx
  31
  32 config ARCH_DAVINCI_DA830
  33         bool "DA830/OMAP-L137/AM17x based system"
  34         select CP_INTC
  35         select ARCH_DAVINCI_DA8XX
  36         select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1
  37
  38 config ARCH_DAVINCI_DA850
  39         bool "DA850/OMAP-L138/AM18x based system"
  40         select CP_INTC
  41         select ARCH_DAVINCI_DA8XX
  42         select ARCH_HAS_CPUFREQ
  43
  44 config ARCH_DAVINCI_DA8XX
  45         select CPU_ARM926T
  46         bool
  47
  48 config ARCH_DAVINCI_DM365
  49         bool "DaVinci 365 based system"
  50         select AINTC
  51         select ARCH_DAVINCI_DMx
  52
  53 config ARCH_DAVINCI_TNETV107X
  54         select CPU_V6
  55         select CP_INTC
  56         bool "TNETV107X based system"
  57
  58 comment "DaVinci Board Type"
  59
  60 config MACH_DAVINCI_EVM
  61         bool "TI DM644x EVM"
  62         default ARCH_DAVINCI_DM644x
  63         depends on ARCH_DAVINCI_DM644x
  64         select MISC_DEVICES
  65         select EEPROM_AT24
  66         select I2C
  67         help
  68           Configure this option to specify the whether the board used
  69           for development is a DM644x EVM
  70
  71 config MACH_SFFSDR
  72         bool "Lyrtech SFFSDR"
  73         depends on ARCH_DAVINCI_DM644x
  74         select MISC_DEVICES
  75         select EEPROM_AT24
  76         select I2C
  77         help
  78           Say Y here to select the Lyrtech Small Form Factor
  79           Software Defined Radio (SFFSDR) board.
  80
  81 config MACH_NEUROS_OSD2
  82         bool "Neuros OSD2 Open Television Set Top Box"
  83         depends on ARCH_DAVINCI_DM644x
  84         help
  85           Configure this option to specify the whether the board used
  86           for development is a Neuros OSD2 Open Set Top Box.
  87
  88 config MACH_DAVINCI_DM355_EVM
  89         bool "TI DM355 EVM"
  90         default ARCH_DAVINCI_DM355
  91         depends on ARCH_DAVINCI_DM355
  92         help
  93           Configure this option to specify the whether the board used
  94           for development is a DM355 EVM
  95
  96 config MACH_DM355_LEOPARD
  97         bool "DM355 Leopard board"
  98         depends on ARCH_DAVINCI_DM355
  99         help
 100           Configure this option to specify the whether the board used
 101           for development is a DM355 Leopard board.
 102
 103 config MACH_DAVINCI_DM6467_EVM
 104         bool "TI DM6467 EVM"
 105         default ARCH_DAVINCI_DM646x
 106         depends on ARCH_DAVINCI_DM646x
 107         select MACH_DAVINCI_DM6467TEVM
 108         select MISC_DEVICES
 109         select EEPROM_AT24
 110         select I2C
 111         help
 112           Configure this option to specify the whether the board used
 113           for development is a DM6467 EVM
 114
 115 config MACH_DAVINCI_DM6467TEVM
 116         bool
 117
 118 config MACH_DAVINCI_DM365_EVM
 119         bool "TI DM365 EVM"
 120         default ARCH_DAVINCI_DM365
 121         depends on ARCH_DAVINCI_DM365
 122         select MISC_DEVICES
 123         select EEPROM_AT24
 124         select I2C
 125         help
 126           Configure this option to specify whether the board used
 127           for development is a DM365 EVM
 128
 129 config MACH_DAVINCI_DA830_EVM
 130         bool "TI DA830/OMAP-L137/AM17x Reference Platform"
 131         default ARCH_DAVINCI_DA830
 132         depends on ARCH_DAVINCI_DA830
 133         select GPIO_PCF857X
 134         select MISC_DEVICES
 135         select EEPROM_AT24
 136         select I2C
 137         help
 138           Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
 139
 140 choice
 141         prompt "Select DA830/OMAP-L137/AM17x UI board peripheral"
 142         depends on MACH_DAVINCI_DA830_EVM
 143         help
 144           The presence of UI card on the DA830/OMAP-L137/AM17x EVM is
 145           detected automatically based on successful probe of the I2C
 146           based GPIO expander on that board. This option selected in this
 147           menu has an effect only in case of a successful UI card detection.
 148
 149 config DA830_UI_LCD
 150         bool "LCD"
 151         help
 152           Say Y here to use the LCD as a framebuffer or simple character
 153           display.
 154
 155 config DA830_UI_NAND
 156         bool "NAND flash"
 157         help
 158           Say Y here to use the NAND flash. Do not forget to setup
 159           the switch correctly.
 160 endchoice
 161
 162 config MACH_DAVINCI_DA850_EVM
 163         bool "TI DA850/OMAP-L138/AM18x Reference Platform"
 164         default ARCH_DAVINCI_DA850
 165         depends on ARCH_DAVINCI_DA850
 166         help
 167           Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module.
 168
 169 choice
 170         prompt "Select peripherals connected to expander on UI board"
 171         depends on MACH_DAVINCI_DA850_EVM
 172         help
 173           The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x
 174           EVM is detected automatically based on successful probe of the I2C
 175           based GPIO expander on that card. This option selected in this
 176           menu has an effect only in case of a successful UI card detection.
 177
 178 config DA850_UI_NONE
 179         bool "No peripheral is enabled"
 180         help
 181           Say Y if you do not want to enable any of the peripherals connected
 182           to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card
 183
 184 config DA850_UI_RMII
 185         bool "RMII Ethernet PHY"
 186         help
 187           Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x
 188           EVM. This PHY is found on the UI daughter card that is supplied with
 189           the EVM.
 190           NOTE: Please take care while choosing this option, MII PHY will
 191           not be functional if RMII mode is selected.
 192
 193 endchoice
 194
 195 config GPIO_PCA953X
 196         default MACH_DAVINCI_DA850_EVM
 197
 198 config KEYBOARD_GPIO_POLLED
 199         default MACH_DAVINCI_DA850_EVM
 200
 201 config MACH_TNETV107X
 202         bool "TI TNETV107X Reference Platform"
 203         default ARCH_DAVINCI_TNETV107X
 204         depends on ARCH_DAVINCI_TNETV107X
 205         help
 206           Say Y here to select the TI TNETV107X Evaluation Module.
 207
 208 config MACH_MITYOMAPL138
 209         bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
 210         depends on ARCH_DAVINCI_DA850
 211         select MISC_DEVICES
 212         select EEPROM_AT24
 213         select I2C
 214         help
 215           Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
 216           System on Module.  Information on this SoM may be found at
 217           http://www.mitydsp.com
 218
 219 config MACH_OMAPL138_HAWKBOARD
 220         bool "TI AM1808 / OMAPL-138 Hawkboard platform"
 221         depends on ARCH_DAVINCI_DA850
 222         help
 223           Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform .
 224           Information of this board may be found at
 225           http://www.hawkboard.org/
 226
 227 config DAVINCI_MUX
 228         bool "DAVINCI multiplexing support"
 229         depends on ARCH_DAVINCI
 230         default y
 231         help
 232           Pin multiplexing support for DAVINCI boards. If your bootloader
 233           sets the multiplexing correctly, say N. Otherwise, or if unsure,
 234           say Y.
 235
 236 config DAVINCI_MUX_DEBUG
 237         bool "Multiplexing debug output"
 238         depends on DAVINCI_MUX
 239         help
 240           Makes the multiplexing functions print out a lot of debug info.
 241           This is useful if you want to find out the correct values of the
 242           multiplexing registers.
 243
 244 config DAVINCI_MUX_WARNINGS
 245         bool "Warn about pins the bootloader didn't set up"
 246         depends on DAVINCI_MUX
 247         help
 248           Choose Y here to warn whenever driver initialization logic needs
 249           to change the pin multiplexing setup. When there are no warnings
 250           printed, it's safe to deselect DAVINCI_MUX for your product.
 251
 252 config DAVINCI_RESET_CLOCKS
 253         bool "Reset unused clocks during boot"
 254         depends on ARCH_DAVINCI
 255         help
 256           Say Y if you want to reset unused clocks during boot.
 257           This option saves power, but assumes all drivers are
 258           using the clock framework. Broken drivers that do not
 259           yet use clock framework may not work with this option.
 260           If you are booting from another operating system, you
 261           probably do not want this option enabled until your
 262           device drivers work properly.
 263
 264 endmenu
 265
 266 endif