arch/arm/mach-ep93xx/Kconfig

   1 if ARCH_EP93XX
   2
   3 menu "Cirrus EP93xx Implementation Options"
   4
   5 config EP93XX_SOC_COMMON
   6         bool
   7         default y
   8         select LEDS_GPIO_REGISTER
   9
  10 config CRUNCH
  11         bool "Support for MaverickCrunch"
  12         help
  13           Enable kernel support for MaverickCrunch.
  14
  15 comment "EP93xx Platforms"
  16
  17 choice
  18         prompt "EP93xx first SDRAM bank selection"
  19         default EP93XX_SDCE3_SYNC_PHYS_OFFSET
  20
  21 config EP93XX_SDCE3_SYNC_PHYS_OFFSET
  22         bool "0x00000000 - SDCE3/SyncBoot"
  23         help
  24           Select this option if you want support for EP93xx boards with the
  25           first SDRAM bank at 0x00000000.
  26
  27 config EP93XX_SDCE0_PHYS_OFFSET
  28         bool "0xc0000000 - SDCEO"
  29         help
  30           Select this option if you want support for EP93xx boards with the
  31           first SDRAM bank at 0xc0000000.
  32
  33 config EP93XX_SDCE1_PHYS_OFFSET
  34         bool "0xd0000000 - SDCE1"
  35         help
  36           Select this option if you want support for EP93xx boards with the
  37           first SDRAM bank at 0xd0000000.
  38
  39 config EP93XX_SDCE2_PHYS_OFFSET
  40         bool "0xe0000000 - SDCE2"
  41         help
  42           Select this option if you want support for EP93xx boards with the
  43           first SDRAM bank at 0xe0000000.
  44
  45 config EP93XX_SDCE3_ASYNC_PHYS_OFFSET
  46         bool "0xf0000000 - SDCE3/AsyncBoot"
  47         help
  48           Select this option if you want support for EP93xx boards with the
  49           first SDRAM bank at 0xf0000000.
  50
  51 endchoice
  52
  53 config MACH_ADSSPHERE
  54         bool "Support ADS Sphere"
  55         depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
  56         help
  57           Say 'Y' here if you want your kernel to support the ADS
  58           Sphere board.
  59
  60 config MACH_EDB93XX
  61         bool
  62
  63 config MACH_EDB9301
  64         bool "Support Cirrus Logic EDB9301"
  65         depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
  66         select MACH_EDB93XX
  67         help
  68           Say 'Y' here if you want your kernel to support the Cirrus
  69           Logic EDB9301 Evaluation Board.
  70
  71 config MACH_EDB9302
  72         bool "Support Cirrus Logic EDB9302"
  73         depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
  74         select MACH_EDB93XX
  75         help
  76           Say 'Y' here if you want your kernel to support the Cirrus
  77           Logic EDB9302 Evaluation Board.
  78
  79 config MACH_EDB9302A
  80         bool "Support Cirrus Logic EDB9302A"
  81         depends on EP93XX_SDCE0_PHYS_OFFSET
  82         select MACH_EDB93XX
  83         help
  84           Say 'Y' here if you want your kernel to support the Cirrus
  85           Logic EDB9302A Evaluation Board.
  86
  87 config MACH_EDB9307
  88         bool "Support Cirrus Logic EDB9307"
  89         depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
  90         select MACH_EDB93XX
  91         help
  92           Say 'Y' here if you want your kernel to support the Cirrus
  93           Logic EDB9307 Evaluation Board.
  94
  95 config MACH_EDB9307A
  96         bool "Support Cirrus Logic EDB9307A"
  97         depends on EP93XX_SDCE0_PHYS_OFFSET
  98         select MACH_EDB93XX
  99         help
 100           Say 'Y' here if you want your kernel to support the Cirrus
 101           Logic EDB9307A Evaluation Board.
 102
 103 config MACH_EDB9312
 104         bool "Support Cirrus Logic EDB9312"
 105         depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 106         select MACH_EDB93XX
 107         help
 108           Say 'Y' here if you want your kernel to support the Cirrus
 109           Logic EDB9312 Evaluation Board.
 110
 111 config MACH_EDB9315
 112         bool "Support Cirrus Logic EDB9315"
 113         depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 114         select MACH_EDB93XX
 115         help
 116           Say 'Y' here if you want your kernel to support the Cirrus
 117           Logic EDB9315 Evaluation Board.
 118
 119 config MACH_EDB9315A
 120         bool "Support Cirrus Logic EDB9315A"
 121         depends on EP93XX_SDCE0_PHYS_OFFSET
 122         select MACH_EDB93XX
 123         help
 124           Say 'Y' here if you want your kernel to support the Cirrus
 125           Logic EDB9315A Evaluation Board.
 126
 127 config MACH_GESBC9312
 128         depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 129         bool "Support Glomation GESBC-9312-sx"
 130         help
 131           Say 'Y' here if you want your kernel to support the Glomation
 132           GESBC-9312-sx board.
 133
 134 config MACH_MICRO9
 135         bool
 136
 137 config MACH_MICRO9H
 138         bool "Support Contec Micro9-High"
 139         depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 140         select MACH_MICRO9
 141         help
 142           Say 'Y' here if you want your kernel to support the
 143           Contec Micro9-High board.
 144
 145 config MACH_MICRO9M
 146         bool "Support Contec Micro9-Mid"
 147         depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
 148         select MACH_MICRO9
 149         help
 150           Say 'Y' here if you want your kernel to support the
 151           Contec Micro9-Mid board.
 152
 153 config MACH_MICRO9L
 154         bool "Support Contec Micro9-Lite"
 155         depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 156         select MACH_MICRO9
 157         help
 158           Say 'Y' here if you want your kernel to support the
 159           Contec Micro9-Lite board.
 160
 161 config MACH_MICRO9S
 162         bool "Support Contec Micro9-Slim"
 163         depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
 164         select MACH_MICRO9
 165         help
 166           Say 'Y' here if you want your kernel to support the
 167           Contec Micro9-Slim board.
 168
 169 config MACH_SIM_ONE
 170         bool "Support Simplemachines Sim.One board"
 171         depends on EP93XX_SDCE0_PHYS_OFFSET
 172         help
 173           Say 'Y' here if you want your kernel to support the
 174           Simplemachines Sim.One board.
 175
 176 config MACH_SNAPPER_CL15
 177         bool "Support Bluewater Systems Snapper CL15 Module"
 178         depends on EP93XX_SDCE0_PHYS_OFFSET
 179         help
 180           Say 'Y' here if you want your kernel to support the Bluewater
 181           Systems Snapper CL15 Module.
 182
 183 config MACH_TS72XX
 184         bool "Support Technologic Systems TS-72xx SBC"
 185         depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 186         help
 187           Say 'Y' here if you want your kernel to support the
 188           Technologic Systems TS-72xx board.
 189
 190 config MACH_VISION_EP9307
 191         bool "Support Vision Engraving Systems EP9307 SoM"
 192         depends on EP93XX_SDCE0_PHYS_OFFSET
 193         help
 194           Say 'Y' here if you want your kernel to support the
 195           Vision Engraving Systems EP9307 SoM.
 196
 197 endmenu
 198
 199 endif