projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
Merge branch 'for-airlied' of git://git.freedesktop.org/git/nouveau/linux-2.6 into...
[deliverable/linux.git] / arch / arm / mach-ep93xx / core.c
1 /*
2 * arch/arm/mach-ep93xx/core.c
3 * Core routines for Cirrus EP93xx chips.
4 *
5 * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
6 * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
7 *
8 * Thanks go to Michael Burian and Ray Lehtiniemi for their key
9 * role in the ep93xx linux community.
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or (at
14 * your option) any later version.
15 */
16
17 #include <linux/kernel.h>
18 #include <linux/init.h>
19 #include <linux/platform_device.h>
20 #include <linux/interrupt.h>
21 #include <linux/dma-mapping.h>
22 #include <linux/timex.h>
23 #include <linux/io.h>
24 #include <linux/gpio.h>
25 #include <linux/leds.h>
26 #include <linux/termios.h>
27 #include <linux/amba/bus.h>
28 #include <linux/amba/serial.h>
29 #include <linux/i2c.h>
30 #include <linux/i2c-gpio.h>
31
32 #include <mach/hardware.h>
33 #include <mach/fb.h>
34 #include <mach/ep93xx_keypad.h>
35
36 #include <asm/mach/map.h>
37 #include <asm/mach/time.h>
38 #include <asm/mach/irq.h>
39
40 #include <asm/hardware/vic.h>
41
42
43 /*************************************************************************
44 * Static I/O mappings that are needed for all EP93xx platforms
45 *************************************************************************/
46 static struct map_desc ep93xx_io_desc[] __initdata = {
47 {
48 .virtual = EP93XX_AHB_VIRT_BASE,
49 .pfn = __phys_to_pfn(EP93XX_AHB_PHYS_BASE),
50 .length = EP93XX_AHB_SIZE,
51 .type = MT_DEVICE,
52 }, {
53 .virtual = EP93XX_APB_VIRT_BASE,
54 .pfn = __phys_to_pfn(EP93XX_APB_PHYS_BASE),
55 .length = EP93XX_APB_SIZE,
56 .type = MT_DEVICE,
57 },
58 };
59
60 void __init ep93xx_map_io(void)
61 {
62 iotable_init(ep93xx_io_desc, ARRAY_SIZE(ep93xx_io_desc));
63 }
64
65
66 /*************************************************************************
67 * Timer handling for EP93xx
68 *************************************************************************
69 * The ep93xx has four internal timers. Timers 1, 2 (both 16 bit) and
70 * 3 (32 bit) count down at 508 kHz, are self-reloading, and can generate
71 * an interrupt on underflow. Timer 4 (40 bit) counts down at 983.04 kHz,
72 * is free-running, and can't generate interrupts.
73 *
74 * The 508 kHz timers are ideal for use for the timer interrupt, as the
75 * most common values of HZ divide 508 kHz nicely. We pick one of the 16
76 * bit timers (timer 1) since we don't need more than 16 bits of reload
77 * value as long as HZ >= 8.
78 *
79 * The higher clock rate of timer 4 makes it a better choice than the
80 * other timers for use in gettimeoffset(), while the fact that it can't
81 * generate interrupts means we don't have to worry about not being able
82 * to use this timer for something else. We also use timer 4 for keeping
83 * track of lost jiffies.
84 */
85 static unsigned int last_jiffy_time;
86
87 #define TIMER4_TICKS_PER_JIFFY DIV_ROUND_CLOSEST(CLOCK_TICK_RATE, HZ)
88
89 static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
90 {
91 __raw_writel(1, EP93XX_TIMER1_CLEAR);
92 while ((signed long)
93 (__raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time)
94 >= TIMER4_TICKS_PER_JIFFY) {
95 last_jiffy_time += TIMER4_TICKS_PER_JIFFY;
96 timer_tick();
97 }
98
99 return IRQ_HANDLED;
100 }
101
102 static struct irqaction ep93xx_timer_irq = {
103 .name = "ep93xx timer",
104 .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
105 .handler = ep93xx_timer_interrupt,
106 };
107
108 static void __init ep93xx_timer_init(void)
109 {
110 /* Enable periodic HZ timer. */
111 __raw_writel(0x48, EP93XX_TIMER1_CONTROL);
112 __raw_writel((508469 / HZ) - 1, EP93XX_TIMER1_LOAD);
113 __raw_writel(0xc8, EP93XX_TIMER1_CONTROL);
114
115 /* Enable lost jiffy timer. */
116 __raw_writel(0x100, EP93XX_TIMER4_VALUE_HIGH);
117
118 setup_irq(IRQ_EP93XX_TIMER1, &ep93xx_timer_irq);
119 }
120
121 static unsigned long ep93xx_gettimeoffset(void)
122 {
123 int offset;
124
125 offset = __raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time;
126
127 /* Calculate (1000000 / 983040) * offset. */
128 return offset + (53 * offset / 3072);
129 }
130
131 struct sys_timer ep93xx_timer = {
132 .init = ep93xx_timer_init,
133 .offset = ep93xx_gettimeoffset,
134 };
135
136
137 /*************************************************************************
138 * GPIO handling for EP93xx
139 *************************************************************************/
140 static unsigned char gpio_int_unmasked[3];
141 static unsigned char gpio_int_enabled[3];
142 static unsigned char gpio_int_type1[3];
143 static unsigned char gpio_int_type2[3];
144 static unsigned char gpio_int_debounce[3];
145
146 /* Port ordering is: A B F */
147 static const u8 int_type1_register_offset[3] = { 0x90, 0xac, 0x4c };
148 static const u8 int_type2_register_offset[3] = { 0x94, 0xb0, 0x50 };
149 static const u8 eoi_register_offset[3] = { 0x98, 0xb4, 0x54 };
150 static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x58 };
151 static const u8 int_debounce_register_offset[3] = { 0xa8, 0xc4, 0x64 };
152
153 void ep93xx_gpio_update_int_params(unsigned port)
154 {
155 BUG_ON(port > 2);
156
157 __raw_writeb(0, EP93XX_GPIO_REG(int_en_register_offset[port]));
158
159 __raw_writeb(gpio_int_type2[port],
160 EP93XX_GPIO_REG(int_type2_register_offset[port]));
161
162 __raw_writeb(gpio_int_type1[port],
163 EP93XX_GPIO_REG(int_type1_register_offset[port]));
164
165 __raw_writeb(gpio_int_unmasked[port] & gpio_int_enabled[port],
166 EP93XX_GPIO_REG(int_en_register_offset[port]));
167 }
168
169 void ep93xx_gpio_int_mask(unsigned line)
170 {
171 gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7));
172 }
173
174 void ep93xx_gpio_int_debounce(unsigned int irq, int enable)
175 {
176 int line = irq_to_gpio(irq);
177 int port = line >> 3;
178 int port_mask = 1 << (line & 7);
179
180 if (enable)
181 gpio_int_debounce[port] |= port_mask;
182 else
183 gpio_int_debounce[port] &= ~port_mask;
184
185 __raw_writeb(gpio_int_debounce[port],
186 EP93XX_GPIO_REG(int_debounce_register_offset[port]));
187 }
188 EXPORT_SYMBOL(ep93xx_gpio_int_debounce);
189
190 /*************************************************************************
191 * EP93xx IRQ handling
192 *************************************************************************/
193 static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
194 {
195 unsigned char status;
196 int i;
197
198 status = __raw_readb(EP93XX_GPIO_A_INT_STATUS);
199 for (i = 0; i < 8; i++) {
200 if (status & (1 << i)) {
201 int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_A(0)) + i;
202 generic_handle_irq(gpio_irq);
203 }
204 }
205
206 status = __raw_readb(EP93XX_GPIO_B_INT_STATUS);
207 for (i = 0; i < 8; i++) {
208 if (status & (1 << i)) {
209 int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i;
210 generic_handle_irq(gpio_irq);
211 }
212 }
213 }
214
215 static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc)
216 {
217 /*
218 * map discontiguous hw irq range to continous sw irq range:
219 *
220 * IRQ_EP93XX_GPIO{0..7}MUX -> gpio_to_irq(EP93XX_GPIO_LINE_F({0..7})
221 */
222 int port_f_idx = ((irq + 1) & 7) ^ 4; /* {19..22,47..50} -> {0..7} */
223 int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_F(0)) + port_f_idx;
224
225 generic_handle_irq(gpio_irq);
226 }
227
228 static void ep93xx_gpio_irq_ack(unsigned int irq)
229 {
230 int line = irq_to_gpio(irq);
231 int port = line >> 3;
232 int port_mask = 1 << (line & 7);
233
234 if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) {
235 gpio_int_type2[port] ^= port_mask; /* switch edge direction */
236 ep93xx_gpio_update_int_params(port);
237 }
238
239 __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
240 }
241
242 static void ep93xx_gpio_irq_mask_ack(unsigned int irq)
243 {
244 int line = irq_to_gpio(irq);
245 int port = line >> 3;
246 int port_mask = 1 << (line & 7);
247
248 if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
249 gpio_int_type2[port] ^= port_mask; /* switch edge direction */
250
251 gpio_int_unmasked[port] &= ~port_mask;
252 ep93xx_gpio_update_int_params(port);
253
254 __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
255 }
256
257 static void ep93xx_gpio_irq_mask(unsigned int irq)
258 {
259 int line = irq_to_gpio(irq);
260 int port = line >> 3;
261
262 gpio_int_unmasked[port] &= ~(1 << (line & 7));
263 ep93xx_gpio_update_int_params(port);
264 }
265
266 static void ep93xx_gpio_irq_unmask(unsigned int irq)
267 {
268 int line = irq_to_gpio(irq);
269 int port = line >> 3;
270
271 gpio_int_unmasked[port] |= 1 << (line & 7);
272 ep93xx_gpio_update_int_params(port);
273 }
274
275
276 /*
277 * gpio_int_type1 controls whether the interrupt is level (0) or
278 * edge (1) triggered, while gpio_int_type2 controls whether it
279 * triggers on low/falling (0) or high/rising (1).
280 */
281 static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
282 {
283 struct irq_desc *desc = irq_desc + irq;
284 const int gpio = irq_to_gpio(irq);
285 const int port = gpio >> 3;
286 const int port_mask = 1 << (gpio & 7);
287
288 gpio_direction_input(gpio);
289
290 switch (type) {
291 case IRQ_TYPE_EDGE_RISING:
292 gpio_int_type1[port] |= port_mask;
293 gpio_int_type2[port] |= port_mask;
294 desc->handle_irq = handle_edge_irq;
295 break;
296 case IRQ_TYPE_EDGE_FALLING:
297 gpio_int_type1[port] |= port_mask;
298 gpio_int_type2[port] &= ~port_mask;
299 desc->handle_irq = handle_edge_irq;
300 break;
301 case IRQ_TYPE_LEVEL_HIGH:
302 gpio_int_type1[port] &= ~port_mask;
303 gpio_int_type2[port] |= port_mask;
304 desc->handle_irq = handle_level_irq;
305 break;
306 case IRQ_TYPE_LEVEL_LOW:
307 gpio_int_type1[port] &= ~port_mask;
308 gpio_int_type2[port] &= ~port_mask;
309 desc->handle_irq = handle_level_irq;
310 break;
311 case IRQ_TYPE_EDGE_BOTH:
312 gpio_int_type1[port] |= port_mask;
313 /* set initial polarity based on current input level */
314 if (gpio_get_value(gpio))
315 gpio_int_type2[port] &= ~port_mask; /* falling */
316 else
317 gpio_int_type2[port] |= port_mask; /* rising */
318 desc->handle_irq = handle_edge_irq;
319 break;
320 default:
321 pr_err("ep93xx: failed to set irq type %d for gpio %d\n",
322 type, gpio);
323 return -EINVAL;
324 }
325
326 gpio_int_enabled[port] |= port_mask;
327
328 desc->status &= ~IRQ_TYPE_SENSE_MASK;
329 desc->status |= type & IRQ_TYPE_SENSE_MASK;
330
331 ep93xx_gpio_update_int_params(port);
332
333 return 0;
334 }
335
336 static struct irq_chip ep93xx_gpio_irq_chip = {
337 .name = "GPIO",
338 .ack = ep93xx_gpio_irq_ack,
339 .mask_ack = ep93xx_gpio_irq_mask_ack,
340 .mask = ep93xx_gpio_irq_mask,
341 .unmask = ep93xx_gpio_irq_unmask,
342 .set_type = ep93xx_gpio_irq_type,
343 };
344
345
346 void __init ep93xx_init_irq(void)
347 {
348 int gpio_irq;
349
350 vic_init(EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
351 vic_init(EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
352
353 for (gpio_irq = gpio_to_irq(0);
354 gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) {
355 set_irq_chip(gpio_irq, &ep93xx_gpio_irq_chip);
356 set_irq_handler(gpio_irq, handle_level_irq);
357 set_irq_flags(gpio_irq, IRQF_VALID);
358 }
359
360 set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler);
361 set_irq_chained_handler(IRQ_EP93XX_GPIO0MUX, ep93xx_gpio_f_irq_handler);
362 set_irq_chained_handler(IRQ_EP93XX_GPIO1MUX, ep93xx_gpio_f_irq_handler);
363 set_irq_chained_handler(IRQ_EP93XX_GPIO2MUX, ep93xx_gpio_f_irq_handler);
364 set_irq_chained_handler(IRQ_EP93XX_GPIO3MUX, ep93xx_gpio_f_irq_handler);
365 set_irq_chained_handler(IRQ_EP93XX_GPIO4MUX, ep93xx_gpio_f_irq_handler);
366 set_irq_chained_handler(IRQ_EP93XX_GPIO5MUX, ep93xx_gpio_f_irq_handler);
367 set_irq_chained_handler(IRQ_EP93XX_GPIO6MUX, ep93xx_gpio_f_irq_handler);
368 set_irq_chained_handler(IRQ_EP93XX_GPIO7MUX, ep93xx_gpio_f_irq_handler);
369 }
370
371
372 /*************************************************************************
373 * EP93xx System Controller Software Locked register handling
374 *************************************************************************/
375
376 /*
377 * syscon_swlock prevents anything else from writing to the syscon
378 * block while a software locked register is being written.
379 */
380 static DEFINE_SPINLOCK(syscon_swlock);
381
382 void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg)
383 {
384 unsigned long flags;
385
386 spin_lock_irqsave(&syscon_swlock, flags);
387
388 __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
389 __raw_writel(val, reg);
390
391 spin_unlock_irqrestore(&syscon_swlock, flags);
392 }
393 EXPORT_SYMBOL(ep93xx_syscon_swlocked_write);
394
395 void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits)
396 {
397 unsigned long flags;
398 unsigned int val;
399
400 spin_lock_irqsave(&syscon_swlock, flags);
401
402 val = __raw_readl(EP93XX_SYSCON_DEVCFG);
403 val |= set_bits;
404 val &= ~clear_bits;
405 __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
406 __raw_writel(val, EP93XX_SYSCON_DEVCFG);
407
408 spin_unlock_irqrestore(&syscon_swlock, flags);
409 }
410 EXPORT_SYMBOL(ep93xx_devcfg_set_clear);
411
412
413 /*************************************************************************
414 * EP93xx peripheral handling
415 *************************************************************************/
416 #define EP93XX_UART_MCR_OFFSET (0x0100)
417
418 static void ep93xx_uart_set_mctrl(struct amba_device *dev,
419 void __iomem *base, unsigned int mctrl)
420 {
421 unsigned int mcr;
422
423 mcr = 0;
424 if (!(mctrl & TIOCM_RTS))
425 mcr |= 2;
426 if (!(mctrl & TIOCM_DTR))
427 mcr |= 1;
428
429 __raw_writel(mcr, base + EP93XX_UART_MCR_OFFSET);
430 }
431
432 static struct amba_pl010_data ep93xx_uart_data = {
433 .set_mctrl = ep93xx_uart_set_mctrl,
434 };
435
436 static struct amba_device uart1_device = {
437 .dev = {
438 .init_name = "apb:uart1",
439 .platform_data = &ep93xx_uart_data,
440 },
441 .res = {
442 .start = EP93XX_UART1_PHYS_BASE,
443 .end = EP93XX_UART1_PHYS_BASE + 0x0fff,
444 .flags = IORESOURCE_MEM,
445 },
446 .irq = { IRQ_EP93XX_UART1, NO_IRQ },
447 .periphid = 0x00041010,
448 };
449
450 static struct amba_device uart2_device = {
451 .dev = {
452 .init_name = "apb:uart2",
453 .platform_data = &ep93xx_uart_data,
454 },
455 .res = {
456 .start = EP93XX_UART2_PHYS_BASE,
457 .end = EP93XX_UART2_PHYS_BASE + 0x0fff,
458 .flags = IORESOURCE_MEM,
459 },
460 .irq = { IRQ_EP93XX_UART2, NO_IRQ },
461 .periphid = 0x00041010,
462 };
463
464 static struct amba_device uart3_device = {
465 .dev = {
466 .init_name = "apb:uart3",
467 .platform_data = &ep93xx_uart_data,
468 },
469 .res = {
470 .start = EP93XX_UART3_PHYS_BASE,
471 .end = EP93XX_UART3_PHYS_BASE + 0x0fff,
472 .flags = IORESOURCE_MEM,
473 },
474 .irq = { IRQ_EP93XX_UART3, NO_IRQ },
475 .periphid = 0x00041010,
476 };
477
478
479 static struct resource ep93xx_rtc_resource[] = {
480 {
481 .start = EP93XX_RTC_PHYS_BASE,
482 .end = EP93XX_RTC_PHYS_BASE + 0x10c - 1,
483 .flags = IORESOURCE_MEM,
484 },
485 };
486
487 static struct platform_device ep93xx_rtc_device = {
488 .name = "ep93xx-rtc",
489 .id = -1,
490 .num_resources = ARRAY_SIZE(ep93xx_rtc_resource),
491 .resource = ep93xx_rtc_resource,
492 };
493
494
495 static struct resource ep93xx_ohci_resources[] = {
496 [0] = {
497 .start = EP93XX_USB_PHYS_BASE,
498 .end = EP93XX_USB_PHYS_BASE + 0x0fff,
499 .flags = IORESOURCE_MEM,
500 },
501 [1] = {
502 .start = IRQ_EP93XX_USB,
503 .end = IRQ_EP93XX_USB,
504 .flags = IORESOURCE_IRQ,
505 },
506 };
507
508
509 static struct platform_device ep93xx_ohci_device = {
510 .name = "ep93xx-ohci",
511 .id = -1,
512 .dev = {
513 .dma_mask = &ep93xx_ohci_device.dev.coherent_dma_mask,
514 .coherent_dma_mask = DMA_BIT_MASK(32),
515 },
516 .num_resources = ARRAY_SIZE(ep93xx_ohci_resources),
517 .resource = ep93xx_ohci_resources,
518 };
519
520 static struct ep93xx_eth_data ep93xx_eth_data;
521
522 static struct resource ep93xx_eth_resource[] = {
523 {
524 .start = EP93XX_ETHERNET_PHYS_BASE,
525 .end = EP93XX_ETHERNET_PHYS_BASE + 0xffff,
526 .flags = IORESOURCE_MEM,
527 }, {
528 .start = IRQ_EP93XX_ETHERNET,
529 .end = IRQ_EP93XX_ETHERNET,
530 .flags = IORESOURCE_IRQ,
531 }
532 };
533
534 static struct platform_device ep93xx_eth_device = {
535 .name = "ep93xx-eth",
536 .id = -1,
537 .dev = {
538 .platform_data = &ep93xx_eth_data,
539 },
540 .num_resources = ARRAY_SIZE(ep93xx_eth_resource),
541 .resource = ep93xx_eth_resource,
542 };
543
544 void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
545 {
546 if (copy_addr)
547 memcpy_fromio(data->dev_addr, EP93XX_ETHERNET_BASE + 0x50, 6);
548
549 ep93xx_eth_data = *data;
550 platform_device_register(&ep93xx_eth_device);
551 }
552
553
554 /*************************************************************************
555 * EP93xx i2c peripheral handling
556 *************************************************************************/
557 static struct i2c_gpio_platform_data ep93xx_i2c_data;
558
559 static struct platform_device ep93xx_i2c_device = {
560 .name = "i2c-gpio",
561 .id = 0,
562 .dev.platform_data = &ep93xx_i2c_data,
563 };
564
565 void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
566 struct i2c_board_info *devices, int num)
567 {
568 /*
569 * Set the EEPROM interface pin drive type control.
570 * Defines the driver type for the EECLK and EEDAT pins as either
571 * open drain, which will require an external pull-up, or a normal
572 * CMOS driver.
573 */
574 if (data->sda_is_open_drain && data->sda_pin != EP93XX_GPIO_LINE_EEDAT)
575 pr_warning("ep93xx: sda != EEDAT, open drain has no effect\n");
576 if (data->scl_is_open_drain && data->scl_pin != EP93XX_GPIO_LINE_EECLK)
577 pr_warning("ep93xx: scl != EECLK, open drain has no effect\n");
578
579 __raw_writel((data->sda_is_open_drain << 1) |
580 (data->scl_is_open_drain << 0),
581 EP93XX_GPIO_EEDRIVE);
582
583 ep93xx_i2c_data = *data;
584 i2c_register_board_info(0, devices, num);
585 platform_device_register(&ep93xx_i2c_device);
586 }
587
588
589 /*************************************************************************
590 * EP93xx LEDs
591 *************************************************************************/
592 static struct gpio_led ep93xx_led_pins[] = {
593 {
594 .name = "platform:grled",
595 .gpio = EP93XX_GPIO_LINE_GRLED,
596 }, {
597 .name = "platform:rdled",
598 .gpio = EP93XX_GPIO_LINE_RDLED,
599 },
600 };
601
602 static struct gpio_led_platform_data ep93xx_led_data = {
603 .num_leds = ARRAY_SIZE(ep93xx_led_pins),
604 .leds = ep93xx_led_pins,
605 };
606
607 static struct platform_device ep93xx_leds = {
608 .name = "leds-gpio",
609 .id = -1,
610 .dev = {
611 .platform_data = &ep93xx_led_data,
612 },
613 };
614
615
616 /*************************************************************************
617 * EP93xx pwm peripheral handling
618 *************************************************************************/
619 static struct resource ep93xx_pwm0_resource[] = {
620 {
621 .start = EP93XX_PWM_PHYS_BASE,
622 .end = EP93XX_PWM_PHYS_BASE + 0x10 - 1,
623 .flags = IORESOURCE_MEM,
624 },
625 };
626
627 static struct platform_device ep93xx_pwm0_device = {
628 .name = "ep93xx-pwm",
629 .id = 0,
630 .num_resources = ARRAY_SIZE(ep93xx_pwm0_resource),
631 .resource = ep93xx_pwm0_resource,
632 };
633
634 static struct resource ep93xx_pwm1_resource[] = {
635 {
636 .start = EP93XX_PWM_PHYS_BASE + 0x20,
637 .end = EP93XX_PWM_PHYS_BASE + 0x30 - 1,
638 .flags = IORESOURCE_MEM,
639 },
640 };
641
642 static struct platform_device ep93xx_pwm1_device = {
643 .name = "ep93xx-pwm",
644 .id = 1,
645 .num_resources = ARRAY_SIZE(ep93xx_pwm1_resource),
646 .resource = ep93xx_pwm1_resource,
647 };
648
649 void __init ep93xx_register_pwm(int pwm0, int pwm1)
650 {
651 if (pwm0)
652 platform_device_register(&ep93xx_pwm0_device);
653
654 /* NOTE: EP9307 does not have PWMOUT1 (pin EGPIO14) */
655 if (pwm1)
656 platform_device_register(&ep93xx_pwm1_device);
657 }
658
659 int ep93xx_pwm_acquire_gpio(struct platform_device *pdev)
660 {
661 int err;
662
663 if (pdev->id == 0) {
664 err = 0;
665 } else if (pdev->id == 1) {
666 err = gpio_request(EP93XX_GPIO_LINE_EGPIO14,
667 dev_name(&pdev->dev));
668 if (err)
669 return err;
670 err = gpio_direction_output(EP93XX_GPIO_LINE_EGPIO14, 0);
671 if (err)
672 goto fail;
673
674 /* PWM 1 output on EGPIO[14] */
675 ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_PONG);
676 } else {
677 err = -ENODEV;
678 }
679
680 return err;
681
682 fail:
683 gpio_free(EP93XX_GPIO_LINE_EGPIO14);
684 return err;
685 }
686 EXPORT_SYMBOL(ep93xx_pwm_acquire_gpio);
687
688 void ep93xx_pwm_release_gpio(struct platform_device *pdev)
689 {
690 if (pdev->id == 1) {
691 gpio_direction_input(EP93XX_GPIO_LINE_EGPIO14);
692 gpio_free(EP93XX_GPIO_LINE_EGPIO14);
693
694 /* EGPIO[14] used for GPIO */
695 ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_PONG);
696 }
697 }
698 EXPORT_SYMBOL(ep93xx_pwm_release_gpio);
699
700
701 /*************************************************************************
702 * EP93xx video peripheral handling
703 *************************************************************************/
704 static struct ep93xxfb_mach_info ep93xxfb_data;
705
706 static struct resource ep93xx_fb_resource[] = {
707 {
708 .start = EP93XX_RASTER_PHYS_BASE,
709 .end = EP93XX_RASTER_PHYS_BASE + 0x800 - 1,
710 .flags = IORESOURCE_MEM,
711 },
712 };
713
714 static struct platform_device ep93xx_fb_device = {
715 .name = "ep93xx-fb",
716 .id = -1,
717 .dev = {
718 .platform_data = &ep93xxfb_data,
719 .coherent_dma_mask = DMA_BIT_MASK(32),
720 .dma_mask = &ep93xx_fb_device.dev.coherent_dma_mask,
721 },
722 .num_resources = ARRAY_SIZE(ep93xx_fb_resource),
723 .resource = ep93xx_fb_resource,
724 };
725
726 void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data)
727 {
728 ep93xxfb_data = *data;
729 platform_device_register(&ep93xx_fb_device);
730 }
731
732
733 /*************************************************************************
734 * EP93xx matrix keypad peripheral handling
735 *************************************************************************/
736 static struct resource ep93xx_keypad_resource[] = {
737 {
738 .start = EP93XX_KEY_MATRIX_PHYS_BASE,
739 .end = EP93XX_KEY_MATRIX_PHYS_BASE + 0x0c - 1,
740 .flags = IORESOURCE_MEM,
741 }, {
742 .start = IRQ_EP93XX_KEY,
743 .end = IRQ_EP93XX_KEY,
744 .flags = IORESOURCE_IRQ,
745 },
746 };
747
748 static struct platform_device ep93xx_keypad_device = {
749 .name = "ep93xx-keypad",
750 .id = -1,
751 .num_resources = ARRAY_SIZE(ep93xx_keypad_resource),
752 .resource = ep93xx_keypad_resource,
753 };
754
755 void __init ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data)
756 {
757 ep93xx_keypad_device.dev.platform_data = data;
758 platform_device_register(&ep93xx_keypad_device);
759 }
760
761 int ep93xx_keypad_acquire_gpio(struct platform_device *pdev)
762 {
763 int err;
764 int i;
765
766 for (i = 0; i < 8; i++) {
767 err = gpio_request(EP93XX_GPIO_LINE_C(i), dev_name(&pdev->dev));
768 if (err)
769 goto fail_gpio_c;
770 err = gpio_request(EP93XX_GPIO_LINE_D(i), dev_name(&pdev->dev));
771 if (err)
772 goto fail_gpio_d;
773 }
774
775 /* Enable the keypad controller; GPIO ports C and D used for keypad */
776 ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_KEYS |
777 EP93XX_SYSCON_DEVCFG_GONK);
778
779 return 0;
780
781 fail_gpio_d:
782 gpio_free(EP93XX_GPIO_LINE_C(i));
783 fail_gpio_c:
784 for ( ; i >= 0; --i) {
785 gpio_free(EP93XX_GPIO_LINE_C(i));
786 gpio_free(EP93XX_GPIO_LINE_D(i));
787 }
788 return err;
789 }
790 EXPORT_SYMBOL(ep93xx_keypad_acquire_gpio);
791
792 void ep93xx_keypad_release_gpio(struct platform_device *pdev)
793 {
794 int i;
795
796 for (i = 0; i < 8; i++) {
797 gpio_free(EP93XX_GPIO_LINE_C(i));
798 gpio_free(EP93XX_GPIO_LINE_D(i));
799 }
800
801 /* Disable the keypad controller; GPIO ports C and D used for GPIO */
802 ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS |
803 EP93XX_SYSCON_DEVCFG_GONK);
804 }
805 EXPORT_SYMBOL(ep93xx_keypad_release_gpio);
806
807
808 extern void ep93xx_gpio_init(void);
809
810 void __init ep93xx_init_devices(void)
811 {
812 /* Disallow access to MaverickCrunch initially */
813 ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA);
814
815 ep93xx_gpio_init();
816
817 amba_device_register(&uart1_device, &iomem_resource);
818 amba_device_register(&uart2_device, &iomem_resource);
819 amba_device_register(&uart3_device, &iomem_resource);
820
821 platform_device_register(&ep93xx_rtc_device);
822 platform_device_register(&ep93xx_ohci_device);
823 platform_device_register(&ep93xx_leds);
824 }
Linux kernel - Deliverables
This page took 0.048909 seconds and 6 git commands to generate.