arch/arm/mach-imx/Kconfig

   1 config ARCH_MXC
   2         bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
   3         select ARCH_HAS_CPUFREQ
   4         select ARCH_HAS_OPP
   5         select ARCH_REQUIRE_GPIOLIB
   6         select ARM_CPU_SUSPEND if PM
   7         select CLKSRC_MMIO
   8         select GENERIC_IRQ_CHIP
   9         select PINCTRL
  10         select PM_OPP if PM
  11         select SOC_BUS
  12         select SRAM
  13         help
  14           Support for Freescale MXC/iMX-based family of processors
  15
  16 menu "Freescale i.MX support"
  17         depends on ARCH_MXC
  18
  19 config MXC_TZIC
  20         bool
  21
  22 config MXC_AVIC
  23         bool
  24
  25 config MXC_DEBUG_BOARD
  26         bool "Enable MXC debug board(for 3-stack)"
  27         help
  28           The debug board is an integral part of the MXC 3-stack(PDK)
  29           platforms, it can be attached or removed from the peripheral
  30           board. On debug board, several debug devices(ethernet, UART,
  31           buttons, LEDs and JTAG) are implemented. Between the MCU and
  32           these devices, a CPLD is added as a bridge which performs
  33           data/address de-multiplexing and decode, signal level shift,
  34           interrupt control and various board functions.
  35
  36 config HAVE_EPIT
  37         bool
  38
  39 config MXC_USE_EPIT
  40         bool "Use EPIT instead of GPT"
  41         depends on HAVE_EPIT
  42         help
  43           Use EPIT as the system timer on systems that have it. Normally you
  44           don't have a reason to do so as the EPIT has the same features and
  45           uses the same clocks as the GPT. Anyway, on some systems the GPT
  46           may be in use for other purposes.
  47
  48 config ARCH_HAS_RNGA
  49         bool
  50
  51 config HAVE_IMX_ANATOP
  52         bool
  53
  54 config HAVE_IMX_GPC
  55         bool
  56
  57 config HAVE_IMX_MMDC
  58         bool
  59
  60 config HAVE_IMX_SRC
  61         def_bool y if SMP
  62         select ARCH_HAS_RESET_CONTROLLER
  63
  64 config IMX_HAVE_IOMUX_V1
  65         bool
  66
  67 config ARCH_MXC_IOMUX_V3
  68         bool
  69
  70 config ARCH_MX1
  71         bool
  72
  73 config ARCH_MX25
  74         bool
  75
  76 config MACH_MX27
  77         bool
  78
  79 config SOC_IMX1
  80         bool
  81         select ARCH_MX1
  82         select CPU_ARM920T
  83         select IMX_HAVE_IOMUX_V1
  84         select MXC_AVIC
  85
  86 config SOC_IMX21
  87         bool
  88         select CPU_ARM926T
  89         select IMX_HAVE_IOMUX_V1
  90         select MXC_AVIC
  91
  92 config SOC_IMX25
  93         bool
  94         select ARCH_MX25
  95         select ARCH_MXC_IOMUX_V3
  96         select CPU_ARM926T
  97         select MXC_AVIC
  98         select PINCTRL_IMX25
  99
 100 config SOC_IMX27
 101         bool
 102         select ARCH_HAS_CPUFREQ
 103         select ARCH_HAS_OPP
 104         select CPU_ARM926T
 105         select IMX_HAVE_IOMUX_V1
 106         select MACH_MX27
 107         select MXC_AVIC
 108         select PINCTRL_IMX27
 109
 110 config SOC_IMX31
 111         bool
 112         select CPU_V6
 113         select IMX_HAVE_PLATFORM_MXC_RNGA
 114         select MXC_AVIC
 115         select SMP_ON_UP if SMP
 116
 117 config SOC_IMX35
 118         bool
 119         select ARCH_MXC_IOMUX_V3
 120         select HAVE_EPIT
 121         select MXC_AVIC
 122         select PINCTRL_IMX35
 123         select SMP_ON_UP if SMP
 124
 125 config SOC_IMX5
 126         bool
 127         select ARCH_HAS_CPUFREQ
 128         select ARCH_HAS_OPP
 129         select ARCH_MXC_IOMUX_V3
 130         select MXC_TZIC
 131
 132 config  SOC_IMX51
 133         bool
 134         select HAVE_IMX_SRC
 135         select PINCTRL_IMX51
 136         select SOC_IMX5
 137
 138 if ARCH_MULTI_V4T
 139
 140 comment "MX1 platforms:"
 141 config MACH_MXLADS
 142         bool
 143
 144 config ARCH_MX1ADS
 145         bool "MX1ADS platform"
 146         select IMX_HAVE_PLATFORM_IMX_I2C
 147         select IMX_HAVE_PLATFORM_IMX_UART
 148         select MACH_MXLADS
 149         select SOC_IMX1
 150         help
 151           Say Y here if you are using Motorola MX1ADS/MXLADS boards
 152
 153 config MACH_SCB9328
 154         bool "Synertronixx scb9328"
 155         select IMX_HAVE_PLATFORM_IMX_UART
 156         select SOC_IMX1
 157         help
 158           Say Y here if you are using a Synertronixx scb9328 board
 159
 160 config MACH_APF9328
 161         bool "APF9328"
 162         select IMX_HAVE_PLATFORM_IMX_I2C
 163         select IMX_HAVE_PLATFORM_IMX_UART
 164         select SOC_IMX1
 165         help
 166           Say Yes here if you are using the Armadeus APF9328 development board
 167
 168 endif
 169
 170 if ARCH_MULTI_V5
 171
 172 comment "MX21 platforms:"
 173
 174 config MACH_MX21ADS
 175         bool "MX21ADS platform"
 176         select IMX_HAVE_PLATFORM_IMX_FB
 177         select IMX_HAVE_PLATFORM_IMX_UART
 178         select IMX_HAVE_PLATFORM_MXC_MMC
 179         select IMX_HAVE_PLATFORM_MXC_NAND
 180         select SOC_IMX21
 181         help
 182           Include support for MX21ADS platform. This includes specific
 183           configurations for the board and its peripherals.
 184
 185 comment "MX25 platforms:"
 186
 187 config MACH_MX25_3DS
 188         bool "Support MX25PDK (3DS) Platform"
 189         select IMX_HAVE_PLATFORM_FLEXCAN
 190         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 191         select IMX_HAVE_PLATFORM_IMX2_WDT
 192         select IMX_HAVE_PLATFORM_IMXDI_RTC
 193         select IMX_HAVE_PLATFORM_IMX_FB
 194         select IMX_HAVE_PLATFORM_IMX_I2C
 195         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 196         select IMX_HAVE_PLATFORM_IMX_UART
 197         select IMX_HAVE_PLATFORM_MXC_EHCI
 198         select IMX_HAVE_PLATFORM_MXC_NAND
 199         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 200         select SOC_IMX25
 201
 202 config MACH_EUKREA_CPUIMX25SD
 203         bool "Support Eukrea CPUIMX25 Platform"
 204         select IMX_HAVE_PLATFORM_FLEXCAN
 205         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 206         select IMX_HAVE_PLATFORM_IMX2_WDT
 207         select IMX_HAVE_PLATFORM_IMXDI_RTC
 208         select IMX_HAVE_PLATFORM_IMX_FB
 209         select IMX_HAVE_PLATFORM_IMX_I2C
 210         select IMX_HAVE_PLATFORM_IMX_UART
 211         select IMX_HAVE_PLATFORM_MXC_EHCI
 212         select IMX_HAVE_PLATFORM_MXC_NAND
 213         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 214         select USB_ULPI_VIEWPORT if USB_ULPI
 215         select SOC_IMX25
 216
 217 choice
 218         prompt "Baseboard"
 219         depends on MACH_EUKREA_CPUIMX25SD
 220         default MACH_EUKREA_MBIMXSD25_BASEBOARD
 221
 222 config MACH_EUKREA_MBIMXSD25_BASEBOARD
 223         bool "Eukrea MBIMXSD development board"
 224         select IMX_HAVE_PLATFORM_GPIO_KEYS
 225         select IMX_HAVE_PLATFORM_IMX_SSI
 226         select IMX_HAVE_PLATFORM_SPI_IMX
 227         select LEDS_GPIO_REGISTER
 228         help
 229           This adds board specific devices that can be found on Eukrea's
 230           MBIMXSD evaluation board.
 231
 232 endchoice
 233
 234 config MACH_IMX25_DT
 235         bool "Support i.MX25 platforms from device tree"
 236         select SOC_IMX25
 237         help
 238           Include support for Freescale i.MX25 based platforms
 239           using the device tree for discovery
 240
 241 comment "MX27 platforms:"
 242
 243 config MACH_MX27ADS
 244         bool "MX27ADS platform"
 245         select IMX_HAVE_PLATFORM_IMX_FB
 246         select IMX_HAVE_PLATFORM_IMX_I2C
 247         select IMX_HAVE_PLATFORM_IMX_UART
 248         select IMX_HAVE_PLATFORM_MXC_MMC
 249         select IMX_HAVE_PLATFORM_MXC_NAND
 250         select IMX_HAVE_PLATFORM_MXC_W1
 251         select SOC_IMX27
 252         help
 253           Include support for MX27ADS platform. This includes specific
 254           configurations for the board and its peripherals.
 255
 256 config MACH_PCM038
 257         bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
 258         select IMX_HAVE_PLATFORM_IMX2_WDT
 259         select IMX_HAVE_PLATFORM_IMX_I2C
 260         select IMX_HAVE_PLATFORM_IMX_UART
 261         select IMX_HAVE_PLATFORM_MXC_EHCI
 262         select IMX_HAVE_PLATFORM_MXC_NAND
 263         select IMX_HAVE_PLATFORM_MXC_W1
 264         select IMX_HAVE_PLATFORM_SPI_IMX
 265         select USB_ULPI_VIEWPORT if USB_ULPI
 266         select SOC_IMX27
 267         help
 268           Include support for phyCORE-i.MX27 (aka pcm038) platform. This
 269           includes specific configurations for the module and its peripherals.
 270
 271 choice
 272         prompt "Baseboard"
 273         depends on MACH_PCM038
 274         default MACH_PCM970_BASEBOARD
 275
 276 config MACH_PCM970_BASEBOARD
 277         bool "PHYTEC PCM970 development board"
 278         select IMX_HAVE_PLATFORM_IMX_FB
 279         select IMX_HAVE_PLATFORM_MXC_MMC
 280         help
 281           This adds board specific devices that can be found on Phytec's
 282           PCM970 evaluation board.
 283
 284 endchoice
 285
 286 config MACH_CPUIMX27
 287         bool "Eukrea CPUIMX27 module"
 288         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 289         select IMX_HAVE_PLATFORM_IMX2_WDT
 290         select IMX_HAVE_PLATFORM_IMX_I2C
 291         select IMX_HAVE_PLATFORM_IMX_UART
 292         select IMX_HAVE_PLATFORM_MXC_EHCI
 293         select IMX_HAVE_PLATFORM_MXC_NAND
 294         select IMX_HAVE_PLATFORM_MXC_W1
 295         select USB_ULPI_VIEWPORT if USB_ULPI
 296         select SOC_IMX27
 297         help
 298           Include support for Eukrea CPUIMX27 platform. This includes
 299           specific configurations for the module and its peripherals.
 300
 301 config MACH_EUKREA_CPUIMX27_USESDHC2
 302         bool "CPUIMX27 integrates SDHC2 module"
 303         depends on MACH_CPUIMX27
 304         select IMX_HAVE_PLATFORM_MXC_MMC
 305         help
 306           This adds support for the internal SDHC2 used on CPUIMX27
 307           for wifi or eMMC.
 308
 309 config MACH_EUKREA_CPUIMX27_USEUART4
 310         bool "CPUIMX27 integrates UART4 module"
 311         depends on MACH_CPUIMX27
 312         help
 313           This adds support for the internal UART4 used on CPUIMX27
 314           for bluetooth.
 315
 316 choice
 317         prompt "Baseboard"
 318         depends on MACH_CPUIMX27
 319         default MACH_EUKREA_MBIMX27_BASEBOARD
 320
 321 config MACH_EUKREA_MBIMX27_BASEBOARD
 322         bool "Eukrea MBIMX27 development board"
 323         select IMX_HAVE_PLATFORM_IMX_FB
 324         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 325         select IMX_HAVE_PLATFORM_IMX_SSI
 326         select IMX_HAVE_PLATFORM_IMX_UART
 327         select IMX_HAVE_PLATFORM_MXC_MMC
 328         select IMX_HAVE_PLATFORM_SPI_IMX
 329         select LEDS_GPIO_REGISTER
 330         help
 331           This adds board specific devices that can be found on Eukrea's
 332           MBIMX27 evaluation board.
 333
 334 endchoice
 335
 336 config MACH_MX27_3DS
 337         bool "MX27PDK platform"
 338         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 339         select IMX_HAVE_PLATFORM_IMX2_WDT
 340         select IMX_HAVE_PLATFORM_IMX_FB
 341         select IMX_HAVE_PLATFORM_IMX_I2C
 342         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 343         select IMX_HAVE_PLATFORM_IMX_SSI
 344         select IMX_HAVE_PLATFORM_IMX_UART
 345         select IMX_HAVE_PLATFORM_MX2_CAMERA
 346         select IMX_HAVE_PLATFORM_MXC_EHCI
 347         select IMX_HAVE_PLATFORM_MXC_MMC
 348         select IMX_HAVE_PLATFORM_SPI_IMX
 349         select MXC_DEBUG_BOARD
 350         select USB_ULPI_VIEWPORT if USB_ULPI
 351         select SOC_IMX27
 352         help
 353           Include support for MX27PDK platform. This includes specific
 354           configurations for the board and its peripherals.
 355
 356 config MACH_IMX27_VISSTRIM_M10
 357         bool "Vista Silicon i.MX27 Visstrim_m10"
 358         select IMX_HAVE_PLATFORM_GPIO_KEYS
 359         select IMX_HAVE_PLATFORM_IMX_I2C
 360         select IMX_HAVE_PLATFORM_IMX_SSI
 361         select IMX_HAVE_PLATFORM_IMX_UART
 362         select IMX_HAVE_PLATFORM_MX2_CAMERA
 363         select IMX_HAVE_PLATFORM_MX2_EMMA
 364         select IMX_HAVE_PLATFORM_MXC_EHCI
 365         select IMX_HAVE_PLATFORM_MXC_MMC
 366         select LEDS_GPIO_REGISTER
 367         select SOC_IMX27
 368         help
 369           Include support for Visstrim_m10 platform and its different variants.
 370           This includes specific configurations for the board and its
 371           peripherals.
 372
 373 config MACH_IMX27LITE
 374         bool "LogicPD MX27 LITEKIT platform"
 375         select IMX_HAVE_PLATFORM_IMX_SSI
 376         select IMX_HAVE_PLATFORM_IMX_UART
 377         select SOC_IMX27
 378         help
 379           Include support for MX27 LITEKIT platform. This includes specific
 380           configurations for the board and its peripherals.
 381
 382 config MACH_PCA100
 383         bool "Phytec phyCARD-s (pca100)"
 384         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 385         select IMX_HAVE_PLATFORM_IMX2_WDT
 386         select IMX_HAVE_PLATFORM_IMX_FB
 387         select IMX_HAVE_PLATFORM_IMX_I2C
 388         select IMX_HAVE_PLATFORM_IMX_SSI
 389         select IMX_HAVE_PLATFORM_IMX_UART
 390         select IMX_HAVE_PLATFORM_MXC_EHCI
 391         select IMX_HAVE_PLATFORM_MXC_MMC
 392         select IMX_HAVE_PLATFORM_MXC_NAND
 393         select IMX_HAVE_PLATFORM_MXC_W1
 394         select IMX_HAVE_PLATFORM_SPI_IMX
 395         select USB_ULPI_VIEWPORT if USB_ULPI
 396         select SOC_IMX27
 397         help
 398           Include support for phyCARD-s (aka pca100) platform. This
 399           includes specific configurations for the module and its peripherals.
 400
 401 config MACH_MXT_TD60
 402         bool "Maxtrack i-MXT TD60"
 403         select IMX_HAVE_PLATFORM_IMX_FB
 404         select IMX_HAVE_PLATFORM_IMX_I2C
 405         select IMX_HAVE_PLATFORM_IMX_UART
 406         select IMX_HAVE_PLATFORM_MXC_MMC
 407         select IMX_HAVE_PLATFORM_MXC_NAND
 408         select SOC_IMX27
 409         help
 410           Include support for i-MXT (aka td60) platform. This
 411           includes specific configurations for the module and its peripherals.
 412
 413 config MACH_IMX27IPCAM
 414         bool "IMX27 IPCAM platform"
 415         select IMX_HAVE_PLATFORM_IMX2_WDT
 416         select IMX_HAVE_PLATFORM_IMX_UART
 417         select SOC_IMX27
 418         help
 419           Include support for IMX27 IPCAM platform. This includes specific
 420           configurations for the board and its peripherals.
 421
 422 config MACH_IMX27_DT
 423         bool "Support i.MX27 platforms from device tree"
 424         select SOC_IMX27
 425         help
 426           Include support for Freescale i.MX27 based platforms
 427           using the device tree for discovery
 428
 429 endif
 430
 431 if ARCH_MULTI_V6
 432
 433 comment "MX31 platforms:"
 434
 435 config MACH_MX31ADS
 436         bool "Support MX31ADS platforms"
 437         default y
 438         select IMX_HAVE_PLATFORM_IMX_I2C
 439         select IMX_HAVE_PLATFORM_IMX_SSI
 440         select IMX_HAVE_PLATFORM_IMX_UART
 441         select SOC_IMX31
 442         help
 443           Include support for MX31ADS platform. This includes specific
 444           configurations for the board and its peripherals.
 445
 446 config MACH_MX31ADS_WM1133_EV1
 447         bool "Support Wolfson Microelectronics 1133-EV1 module"
 448         depends on MACH_MX31ADS
 449         depends on MFD_WM8350_I2C
 450         depends on REGULATOR_WM8350 = y
 451         help
 452           Include support for the Wolfson Microelectronics 1133-EV1 PMU
 453           and audio module for the MX31ADS platform.
 454
 455 config MACH_MX31LILLY
 456         bool "Support MX31 LILLY-1131 platforms (INCO startec)"
 457         select IMX_HAVE_PLATFORM_IMX_UART
 458         select IMX_HAVE_PLATFORM_IPU_CORE
 459         select IMX_HAVE_PLATFORM_MXC_EHCI
 460         select IMX_HAVE_PLATFORM_MXC_MMC
 461         select IMX_HAVE_PLATFORM_SPI_IMX
 462         select USB_ULPI_VIEWPORT if USB_ULPI
 463         select SOC_IMX31
 464         help
 465           Include support for mx31 based LILLY1131 modules. This includes
 466           specific configurations for the board and its peripherals.
 467
 468 config MACH_MX31LITE
 469         bool "Support MX31 LITEKIT (LogicPD)"
 470         select IMX_HAVE_PLATFORM_IMX2_WDT
 471         select IMX_HAVE_PLATFORM_IMX_UART
 472         select IMX_HAVE_PLATFORM_MXC_EHCI
 473         select IMX_HAVE_PLATFORM_MXC_MMC
 474         select IMX_HAVE_PLATFORM_MXC_NAND
 475         select IMX_HAVE_PLATFORM_MXC_RTC
 476         select IMX_HAVE_PLATFORM_SPI_IMX
 477         select LEDS_GPIO_REGISTER
 478         select USB_ULPI_VIEWPORT if USB_ULPI
 479         select SOC_IMX31
 480         help
 481           Include support for MX31 LITEKIT platform. This includes specific
 482           configurations for the board and its peripherals.
 483
 484 config MACH_PCM037
 485         bool "Support Phytec pcm037 (i.MX31) platforms"
 486         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 487         select IMX_HAVE_PLATFORM_IMX2_WDT
 488         select IMX_HAVE_PLATFORM_IMX_I2C
 489         select IMX_HAVE_PLATFORM_IMX_UART
 490         select IMX_HAVE_PLATFORM_IPU_CORE
 491         select IMX_HAVE_PLATFORM_MXC_EHCI
 492         select IMX_HAVE_PLATFORM_MXC_MMC
 493         select IMX_HAVE_PLATFORM_MXC_NAND
 494         select IMX_HAVE_PLATFORM_MXC_W1
 495         select USB_ULPI_VIEWPORT if USB_ULPI
 496         select SOC_IMX31
 497         help
 498           Include support for Phytec pcm037 platform. This includes
 499           specific configurations for the board and its peripherals.
 500
 501 config MACH_PCM037_EET
 502         bool "Support pcm037 EET board extensions"
 503         depends on MACH_PCM037
 504         select IMX_HAVE_PLATFORM_GPIO_KEYS
 505         select IMX_HAVE_PLATFORM_SPI_IMX
 506         help
 507           Add support for PCM037 EET baseboard extensions. If you are using the
 508           OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
 509           command-line parameter.
 510
 511 config MACH_MX31_3DS
 512         bool "Support MX31PDK (3DS)"
 513         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 514         select IMX_HAVE_PLATFORM_IMX2_WDT
 515         select IMX_HAVE_PLATFORM_IMX_I2C
 516         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 517         select IMX_HAVE_PLATFORM_IMX_SSI
 518         select IMX_HAVE_PLATFORM_IMX_UART
 519         select IMX_HAVE_PLATFORM_IPU_CORE
 520         select IMX_HAVE_PLATFORM_MXC_EHCI
 521         select IMX_HAVE_PLATFORM_MXC_MMC
 522         select IMX_HAVE_PLATFORM_MXC_NAND
 523         select IMX_HAVE_PLATFORM_SPI_IMX
 524         select MXC_DEBUG_BOARD
 525         select USB_ULPI_VIEWPORT if USB_ULPI
 526         select SOC_IMX31
 527         help
 528           Include support for MX31PDK (3DS) platform. This includes specific
 529           configurations for the board and its peripherals.
 530
 531 config MACH_MX31_3DS_MXC_NAND_USE_BBT
 532         bool "Make the MXC NAND driver use the in flash Bad Block Table"
 533         depends on MACH_MX31_3DS
 534         depends on MTD_NAND_MXC
 535         help
 536           Enable this if you want that the MXC NAND driver uses the in flash
 537           Bad Block Table to know what blocks are bad instead of scanning the
 538           entire flash looking for bad block markers.
 539
 540 config MACH_MX31MOBOARD
 541         bool "Support mx31moboard platforms (EPFL Mobots group)"
 542         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 543         select IMX_HAVE_PLATFORM_IMX2_WDT
 544         select IMX_HAVE_PLATFORM_IMX_I2C
 545         select IMX_HAVE_PLATFORM_IMX_SSI
 546         select IMX_HAVE_PLATFORM_IMX_UART
 547         select IMX_HAVE_PLATFORM_IPU_CORE
 548         select IMX_HAVE_PLATFORM_MXC_EHCI
 549         select IMX_HAVE_PLATFORM_MXC_MMC
 550         select IMX_HAVE_PLATFORM_SPI_IMX
 551         select LEDS_GPIO_REGISTER
 552         select USB_ULPI_VIEWPORT if USB_ULPI
 553         select SOC_IMX31
 554         help
 555           Include support for mx31moboard platform. This includes specific
 556           configurations for the board and its peripherals.
 557
 558 config MACH_QONG
 559         bool "Support Dave/DENX QongEVB-LITE platform"
 560         select IMX_HAVE_PLATFORM_IMX2_WDT
 561         select IMX_HAVE_PLATFORM_IMX_UART
 562         select SOC_IMX31
 563         help
 564           Include support for Dave/DENX QongEVB-LITE platform. This includes
 565           specific configurations for the board and its peripherals.
 566
 567 config MACH_ARMADILLO5X0
 568         bool "Support Atmark Armadillo-500 Development Base Board"
 569         select IMX_HAVE_PLATFORM_GPIO_KEYS
 570         select IMX_HAVE_PLATFORM_IMX_I2C
 571         select IMX_HAVE_PLATFORM_IMX_UART
 572         select IMX_HAVE_PLATFORM_IPU_CORE
 573         select IMX_HAVE_PLATFORM_MXC_EHCI
 574         select IMX_HAVE_PLATFORM_MXC_MMC
 575         select IMX_HAVE_PLATFORM_MXC_NAND
 576         select USB_ULPI_VIEWPORT if USB_ULPI
 577         select SOC_IMX31
 578         help
 579           Include support for Atmark Armadillo-500 platform. This includes
 580           specific configurations for the board and its peripherals.
 581
 582 config MACH_KZM_ARM11_01
 583         bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
 584         select IMX_HAVE_PLATFORM_IMX_UART
 585         select SOC_IMX31
 586         help
 587           Include support for KZM-ARM11-01. This includes specific
 588           configurations for the board and its peripherals.
 589
 590 config MACH_BUG
 591         bool "Support Buglabs BUGBase platform"
 592         default y
 593         select IMX_HAVE_PLATFORM_IMX_UART
 594         select SOC_IMX31
 595         help
 596           Include support for BUGBase 1.3 platform. This includes specific
 597           configurations for the board and its peripherals.
 598
 599 config MACH_IMX31_DT
 600         bool "Support i.MX31 platforms from device tree"
 601         select SOC_IMX31
 602         help
 603           Include support for Freescale i.MX31 based platforms
 604           using the device tree for discovery.
 605
 606 comment "MX35 platforms:"
 607
 608 config MACH_IMX35_DT
 609         bool "Support i.MX35 platforms from device tree"
 610         select SOC_IMX35
 611         help
 612           Include support for Freescale i.MX35 based platforms
 613           using the device tree for discovery.
 614
 615 config MACH_PCM043
 616         bool "Support Phytec pcm043 (i.MX35) platforms"
 617         select IMX_HAVE_PLATFORM_FLEXCAN
 618         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 619         select IMX_HAVE_PLATFORM_IMX2_WDT
 620         select IMX_HAVE_PLATFORM_IMX_I2C
 621         select IMX_HAVE_PLATFORM_IMX_SSI
 622         select IMX_HAVE_PLATFORM_IMX_UART
 623         select IMX_HAVE_PLATFORM_IPU_CORE
 624         select IMX_HAVE_PLATFORM_MXC_EHCI
 625         select IMX_HAVE_PLATFORM_MXC_NAND
 626         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 627         select USB_ULPI_VIEWPORT if USB_ULPI
 628         select SOC_IMX35
 629         help
 630           Include support for Phytec pcm043 platform. This includes
 631           specific configurations for the board and its peripherals.
 632
 633 config MACH_MX35_3DS
 634         bool "Support MX35PDK platform"
 635         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 636         select IMX_HAVE_PLATFORM_IMX2_WDT
 637         select IMX_HAVE_PLATFORM_IMX_FB
 638         select IMX_HAVE_PLATFORM_IMX_I2C
 639         select IMX_HAVE_PLATFORM_IMX_UART
 640         select IMX_HAVE_PLATFORM_IPU_CORE
 641         select IMX_HAVE_PLATFORM_MXC_EHCI
 642         select IMX_HAVE_PLATFORM_MXC_NAND
 643         select IMX_HAVE_PLATFORM_MXC_RTC
 644         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 645         select MXC_DEBUG_BOARD
 646         select SOC_IMX35
 647         help
 648           Include support for MX35PDK platform. This includes specific
 649           configurations for the board and its peripherals.
 650
 651 config MACH_EUKREA_CPUIMX35SD
 652         bool "Support Eukrea CPUIMX35 Platform"
 653         select IMX_HAVE_PLATFORM_FLEXCAN
 654         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 655         select IMX_HAVE_PLATFORM_IMX2_WDT
 656         select IMX_HAVE_PLATFORM_IMX_I2C
 657         select IMX_HAVE_PLATFORM_IMX_UART
 658         select IMX_HAVE_PLATFORM_MXC_EHCI
 659         select IMX_HAVE_PLATFORM_MXC_NAND
 660         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 661         select USB_ULPI_VIEWPORT if USB_ULPI
 662         select SOC_IMX35
 663         help
 664           Include support for Eukrea CPUIMX35 platform. This includes
 665           specific configurations for the board and its peripherals.
 666
 667 choice
 668         prompt "Baseboard"
 669         depends on MACH_EUKREA_CPUIMX35SD
 670         default MACH_EUKREA_MBIMXSD35_BASEBOARD
 671
 672 config MACH_EUKREA_MBIMXSD35_BASEBOARD
 673         bool "Eukrea MBIMXSD development board"
 674         select IMX_HAVE_PLATFORM_GPIO_KEYS
 675         select IMX_HAVE_PLATFORM_IMX_SSI
 676         select IMX_HAVE_PLATFORM_IPU_CORE
 677         select IMX_HAVE_PLATFORM_SPI_IMX
 678         select LEDS_GPIO_REGISTER
 679         help
 680           This adds board specific devices that can be found on Eukrea's
 681           MBIMXSD evaluation board.
 682
 683 endchoice
 684
 685 config MACH_VPR200
 686         bool "Support VPR200 platform"
 687         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 688         select IMX_HAVE_PLATFORM_GPIO_KEYS
 689         select IMX_HAVE_PLATFORM_IMX2_WDT
 690         select IMX_HAVE_PLATFORM_IMX_I2C
 691         select IMX_HAVE_PLATFORM_IMX_UART
 692         select IMX_HAVE_PLATFORM_IPU_CORE
 693         select IMX_HAVE_PLATFORM_MXC_EHCI
 694         select IMX_HAVE_PLATFORM_MXC_NAND
 695         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 696         select SOC_IMX35
 697         help
 698           Include support for VPR200 platform. This includes specific
 699           configurations for the board and its peripherals.
 700
 701 endif
 702
 703 if ARCH_MULTI_V7
 704
 705 comment "Device tree only"
 706
 707 config  SOC_IMX50
 708         bool "i.MX50 support"
 709         select HAVE_IMX_SRC
 710         select PINCTRL_IMX50
 711         select SOC_IMX5
 712
 713         help
 714           This enables support for Freescale i.MX50 processor.
 715
 716 config MACH_IMX51_DT
 717         bool "i.MX51 support"
 718         select SOC_IMX51
 719         help
 720           This enables support for Freescale i.MX51 processor
 721
 722 config  SOC_IMX53
 723         bool "i.MX53 support"
 724         select HAVE_IMX_SRC
 725         select PINCTRL_IMX53
 726         select SOC_IMX5
 727
 728         help
 729           This enables support for Freescale i.MX53 processor.
 730
 731 config SOC_IMX6
 732         bool
 733         select ARM_ERRATA_754322
 734         select ARM_ERRATA_775420
 735         select ARM_GIC
 736         select HAVE_IMX_ANATOP
 737         select HAVE_IMX_GPC
 738         select HAVE_IMX_MMDC
 739         select HAVE_IMX_SRC
 740         select MFD_SYSCON
 741         select PL310_ERRATA_588369 if CACHE_PL310
 742         select PL310_ERRATA_727915 if CACHE_PL310
 743         select PL310_ERRATA_769419 if CACHE_PL310
 744
 745 config SOC_IMX6Q
 746         bool "i.MX6 Quad/DualLite support"
 747         select ARM_ERRATA_764369 if SMP
 748         select HAVE_ARM_SCU if SMP
 749         select HAVE_ARM_TWD if SMP
 750         select PCI_DOMAINS if PCI
 751         select PINCTRL_IMX6Q
 752         select SOC_IMX6
 753
 754         help
 755           This enables support for Freescale i.MX6 Quad processor.
 756
 757 config SOC_IMX6SL
 758         bool "i.MX6 SoloLite support"
 759         select PINCTRL_IMX6SL
 760         select SOC_IMX6
 761
 762         help
 763           This enables support for Freescale i.MX6 SoloLite processor.
 764
 765 config SOC_IMX6SX
 766         bool "i.MX6 SoloX support"
 767         select PINCTRL_IMX6SX
 768         select SOC_IMX6
 769
 770         help
 771           This enables support for Freescale i.MX6 SoloX processor.
 772
 773 config SOC_VF610
 774         bool "Vybrid Family VF610 support"
 775         select ARM_GIC
 776         select PINCTRL_VF610
 777         select VF_PIT_TIMER
 778         select PL310_ERRATA_588369 if CACHE_PL310
 779         select PL310_ERRATA_727915 if CACHE_PL310
 780         select PL310_ERRATA_769419 if CACHE_PL310
 781
 782         help
 783           This enable support for Freescale Vybrid VF610 processor.
 784
 785 endif
 786
 787 source "arch/arm/mach-imx/devices/Kconfig"
 788
 789 endmenu