arch/arm/mach-imx/Kconfig

   1 config ARCH_MXC
   2         bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
   3         select ARCH_REQUIRE_GPIOLIB
   4         select ARM_PATCH_PHYS_VIRT
   5         select AUTO_ZRELADDR if !ZBOOT_ROM
   6         select CLKDEV_LOOKUP
   7         select CLKSRC_MMIO
   8         select GENERIC_CLOCKEVENTS
   9         select GENERIC_IRQ_CHIP
  10         select MULTI_IRQ_HANDLER
  11         select SPARSE_IRQ
  12         select USE_OF
  13         help
  14           Support for Freescale MXC/iMX-based family of processors
  15
  16 menu "Freescale i.MX support"
  17         depends on ARCH_MXC
  18
  19 config MXC_IRQ_PRIOR
  20         bool "Use IRQ priority"
  21         help
  22           Select this if you want to use prioritized IRQ handling.
  23           This feature prevents higher priority ISR to be interrupted
  24           by lower priority IRQ even IRQF_DISABLED flag is not set.
  25           This may be useful in embedded applications, where are strong
  26           requirements for timing.
  27           Say N here, unless you have a specialized requirement.
  28
  29 config MXC_TZIC
  30         bool
  31
  32 config MXC_AVIC
  33         bool
  34
  35 config MXC_DEBUG_BOARD
  36         bool "Enable MXC debug board(for 3-stack)"
  37         help
  38           The debug board is an integral part of the MXC 3-stack(PDK)
  39           platforms, it can be attached or removed from the peripheral
  40           board. On debug board, several debug devices(ethernet, UART,
  41           buttons, LEDs and JTAG) are implemented. Between the MCU and
  42           these devices, a CPLD is added as a bridge which performs
  43           data/address de-multiplexing and decode, signal level shift,
  44           interrupt control and various board functions.
  45
  46 config HAVE_EPIT
  47         bool
  48
  49 config MXC_USE_EPIT
  50         bool "Use EPIT instead of GPT"
  51         depends on HAVE_EPIT
  52         help
  53           Use EPIT as the system timer on systems that have it. Normally you
  54           don't have a reason to do so as the EPIT has the same features and
  55           uses the same clocks as the GPT. Anyway, on some systems the GPT
  56           may be in use for other purposes.
  57
  58 config MXC_ULPI
  59         bool
  60
  61 config ARCH_HAS_RNGA
  62         bool
  63
  64 config IRAM_ALLOC
  65         bool
  66         select GENERIC_ALLOCATOR
  67
  68 config HAVE_IMX_GPC
  69         bool
  70
  71 config HAVE_IMX_MMDC
  72         bool
  73
  74 config HAVE_IMX_SRC
  75         def_bool y if SMP
  76
  77 config IMX_HAVE_IOMUX_V1
  78         bool
  79
  80 config ARCH_MXC_IOMUX_V3
  81         bool
  82
  83 config ARCH_MX1
  84         bool
  85
  86 config MACH_MX21
  87         bool
  88
  89 config ARCH_MX25
  90         bool
  91
  92 config MACH_MX27
  93         bool
  94
  95 config ARCH_MX5
  96         bool
  97
  98 config ARCH_MX50
  99         bool
 100
 101 config ARCH_MX51
 102         bool
 103
 104 config ARCH_MX53
 105         bool
 106
 107 config SOC_IMX1
 108         bool
 109         select ARCH_MX1
 110         select COMMON_CLK
 111         select CPU_ARM920T
 112         select IMX_HAVE_IOMUX_V1
 113         select MXC_AVIC
 114
 115 config SOC_IMX21
 116         bool
 117         select COMMON_CLK
 118         select CPU_ARM926T
 119         select IMX_HAVE_IOMUX_V1
 120         select MACH_MX21
 121         select MXC_AVIC
 122
 123 config SOC_IMX25
 124         bool
 125         select ARCH_MX25
 126         select ARCH_MXC_IOMUX_V3
 127         select COMMON_CLK
 128         select CPU_ARM926T
 129         select HAVE_CAN_FLEXCAN if CAN
 130         select MXC_AVIC
 131
 132 config SOC_IMX27
 133         bool
 134         select COMMON_CLK
 135         select CPU_ARM926T
 136         select IMX_HAVE_IOMUX_V1
 137         select MACH_MX27
 138         select MXC_AVIC
 139
 140 config SOC_IMX31
 141         bool
 142         select COMMON_CLK
 143         select CPU_V6
 144         select IMX_HAVE_PLATFORM_MXC_RNGA
 145         select MXC_AVIC
 146         select SMP_ON_UP if SMP
 147
 148 config SOC_IMX35
 149         bool
 150         select ARCH_MXC_IOMUX_V3
 151         select COMMON_CLK
 152         select CPU_V6K
 153         select HAVE_CAN_FLEXCAN if CAN
 154         select HAVE_EPIT
 155         select MXC_AVIC
 156         select SMP_ON_UP if SMP
 157
 158 config SOC_IMX5
 159         bool
 160         select ARCH_HAS_CPUFREQ
 161         select ARCH_MX5
 162         select ARCH_MXC_IOMUX_V3
 163         select COMMON_CLK
 164         select CPU_V7
 165         select MXC_TZIC
 166
 167 config SOC_IMX50
 168         bool
 169         select ARCH_MX50
 170         select SOC_IMX5
 171
 172 config  SOC_IMX51
 173         bool
 174         select ARCH_MX5
 175         select ARCH_MX51
 176         select PINCTRL
 177         select PINCTRL_IMX51
 178         select SOC_IMX5
 179
 180 if ARCH_MULTI_V4T
 181
 182 comment "MX1 platforms:"
 183 config MACH_MXLADS
 184         bool
 185
 186 config ARCH_MX1ADS
 187         bool "MX1ADS platform"
 188         select IMX_HAVE_PLATFORM_IMX_I2C
 189         select IMX_HAVE_PLATFORM_IMX_UART
 190         select MACH_MXLADS
 191         select SOC_IMX1
 192         help
 193           Say Y here if you are using Motorola MX1ADS/MXLADS boards
 194
 195 config MACH_SCB9328
 196         bool "Synertronixx scb9328"
 197         select IMX_HAVE_PLATFORM_IMX_UART
 198         help
 199           Say Y here if you are using a Synertronixx scb9328 board
 200
 201 config MACH_APF9328
 202         bool "APF9328"
 203         select IMX_HAVE_PLATFORM_IMX_I2C
 204         select IMX_HAVE_PLATFORM_IMX_UART
 205         select SOC_IMX1
 206         help
 207           Say Yes here if you are using the Armadeus APF9328 development board
 208
 209 endif
 210
 211 if ARCH_MULTI_V5
 212
 213 comment "MX21 platforms:"
 214
 215 config MACH_MX21ADS
 216         bool "MX21ADS platform"
 217         select IMX_HAVE_PLATFORM_IMX_FB
 218         select IMX_HAVE_PLATFORM_IMX_UART
 219         select IMX_HAVE_PLATFORM_MXC_MMC
 220         select IMX_HAVE_PLATFORM_MXC_NAND
 221         select SOC_IMX21
 222         help
 223           Include support for MX21ADS platform. This includes specific
 224           configurations for the board and its peripherals.
 225
 226 comment "MX25 platforms:"
 227
 228 config MACH_MX25_3DS
 229         bool "Support MX25PDK (3DS) Platform"
 230         select IMX_HAVE_PLATFORM_FLEXCAN
 231         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 232         select IMX_HAVE_PLATFORM_IMX2_WDT
 233         select IMX_HAVE_PLATFORM_IMXDI_RTC
 234         select IMX_HAVE_PLATFORM_IMX_FB
 235         select IMX_HAVE_PLATFORM_IMX_I2C
 236         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 237         select IMX_HAVE_PLATFORM_IMX_UART
 238         select IMX_HAVE_PLATFORM_MXC_EHCI
 239         select IMX_HAVE_PLATFORM_MXC_NAND
 240         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 241         select SOC_IMX25
 242
 243 config MACH_EUKREA_CPUIMX25SD
 244         bool "Support Eukrea CPUIMX25 Platform"
 245         select IMX_HAVE_PLATFORM_FLEXCAN
 246         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 247         select IMX_HAVE_PLATFORM_IMX2_WDT
 248         select IMX_HAVE_PLATFORM_IMXDI_RTC
 249         select IMX_HAVE_PLATFORM_IMX_FB
 250         select IMX_HAVE_PLATFORM_IMX_I2C
 251         select IMX_HAVE_PLATFORM_IMX_UART
 252         select IMX_HAVE_PLATFORM_MXC_EHCI
 253         select IMX_HAVE_PLATFORM_MXC_NAND
 254         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 255         select MXC_ULPI if USB_ULPI
 256         select SOC_IMX25
 257
 258 choice
 259         prompt "Baseboard"
 260         depends on MACH_EUKREA_CPUIMX25SD
 261         default MACH_EUKREA_MBIMXSD25_BASEBOARD
 262
 263 config MACH_EUKREA_MBIMXSD25_BASEBOARD
 264         bool "Eukrea MBIMXSD development board"
 265         select IMX_HAVE_PLATFORM_GPIO_KEYS
 266         select IMX_HAVE_PLATFORM_IMX_SSI
 267         select IMX_HAVE_PLATFORM_SPI_IMX
 268         select LEDS_GPIO_REGISTER
 269         help
 270           This adds board specific devices that can be found on Eukrea's
 271           MBIMXSD evaluation board.
 272
 273 endchoice
 274
 275 config MACH_IMX25_DT
 276         bool "Support i.MX25 platforms from device tree"
 277         select SOC_IMX25
 278         help
 279           Include support for Freescale i.MX25 based platforms
 280           using the device tree for discovery
 281
 282 comment "MX27 platforms:"
 283
 284 config MACH_MX27ADS
 285         bool "MX27ADS platform"
 286         select IMX_HAVE_PLATFORM_IMX_FB
 287         select IMX_HAVE_PLATFORM_IMX_I2C
 288         select IMX_HAVE_PLATFORM_IMX_UART
 289         select IMX_HAVE_PLATFORM_MXC_MMC
 290         select IMX_HAVE_PLATFORM_MXC_NAND
 291         select IMX_HAVE_PLATFORM_MXC_W1
 292         select SOC_IMX27
 293         help
 294           Include support for MX27ADS platform. This includes specific
 295           configurations for the board and its peripherals.
 296
 297 config MACH_PCM038
 298         bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
 299         select IMX_HAVE_PLATFORM_IMX2_WDT
 300         select IMX_HAVE_PLATFORM_IMX_I2C
 301         select IMX_HAVE_PLATFORM_IMX_UART
 302         select IMX_HAVE_PLATFORM_MXC_EHCI
 303         select IMX_HAVE_PLATFORM_MXC_NAND
 304         select IMX_HAVE_PLATFORM_MXC_W1
 305         select IMX_HAVE_PLATFORM_SPI_IMX
 306         select MXC_ULPI if USB_ULPI
 307         select SOC_IMX27
 308         help
 309           Include support for phyCORE-i.MX27 (aka pcm038) platform. This
 310           includes specific configurations for the module and its peripherals.
 311
 312 choice
 313         prompt "Baseboard"
 314         depends on MACH_PCM038
 315         default MACH_PCM970_BASEBOARD
 316
 317 config MACH_PCM970_BASEBOARD
 318         bool "PHYTEC PCM970 development board"
 319         select IMX_HAVE_PLATFORM_IMX_FB
 320         select IMX_HAVE_PLATFORM_MXC_MMC
 321         help
 322           This adds board specific devices that can be found on Phytec's
 323           PCM970 evaluation board.
 324
 325 endchoice
 326
 327 config MACH_CPUIMX27
 328         bool "Eukrea CPUIMX27 module"
 329         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 330         select IMX_HAVE_PLATFORM_IMX2_WDT
 331         select IMX_HAVE_PLATFORM_IMX_I2C
 332         select IMX_HAVE_PLATFORM_IMX_UART
 333         select IMX_HAVE_PLATFORM_MXC_EHCI
 334         select IMX_HAVE_PLATFORM_MXC_NAND
 335         select IMX_HAVE_PLATFORM_MXC_W1
 336         select MXC_ULPI if USB_ULPI
 337         select SOC_IMX27
 338         help
 339           Include support for Eukrea CPUIMX27 platform. This includes
 340           specific configurations for the module and its peripherals.
 341
 342 config MACH_EUKREA_CPUIMX27_USESDHC2
 343         bool "CPUIMX27 integrates SDHC2 module"
 344         depends on MACH_CPUIMX27
 345         select IMX_HAVE_PLATFORM_MXC_MMC
 346         help
 347           This adds support for the internal SDHC2 used on CPUIMX27
 348           for wifi or eMMC.
 349
 350 config MACH_EUKREA_CPUIMX27_USEUART4
 351         bool "CPUIMX27 integrates UART4 module"
 352         depends on MACH_CPUIMX27
 353         help
 354           This adds support for the internal UART4 used on CPUIMX27
 355           for bluetooth.
 356
 357 choice
 358         prompt "Baseboard"
 359         depends on MACH_CPUIMX27
 360         default MACH_EUKREA_MBIMX27_BASEBOARD
 361
 362 config MACH_EUKREA_MBIMX27_BASEBOARD
 363         bool "Eukrea MBIMX27 development board"
 364         select IMX_HAVE_PLATFORM_IMX_FB
 365         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 366         select IMX_HAVE_PLATFORM_IMX_SSI
 367         select IMX_HAVE_PLATFORM_IMX_UART
 368         select IMX_HAVE_PLATFORM_MXC_MMC
 369         select IMX_HAVE_PLATFORM_SPI_IMX
 370         select LEDS_GPIO_REGISTER
 371         help
 372           This adds board specific devices that can be found on Eukrea's
 373           MBIMX27 evaluation board.
 374
 375 endchoice
 376
 377 config MACH_MX27_3DS
 378         bool "MX27PDK platform"
 379         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 380         select IMX_HAVE_PLATFORM_IMX2_WDT
 381         select IMX_HAVE_PLATFORM_IMX_FB
 382         select IMX_HAVE_PLATFORM_IMX_I2C
 383         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 384         select IMX_HAVE_PLATFORM_IMX_SSI
 385         select IMX_HAVE_PLATFORM_IMX_UART
 386         select IMX_HAVE_PLATFORM_MX2_CAMERA
 387         select IMX_HAVE_PLATFORM_MXC_EHCI
 388         select IMX_HAVE_PLATFORM_MXC_MMC
 389         select IMX_HAVE_PLATFORM_SPI_IMX
 390         select MXC_DEBUG_BOARD
 391         select MXC_ULPI if USB_ULPI
 392         select SOC_IMX27
 393         help
 394           Include support for MX27PDK platform. This includes specific
 395           configurations for the board and its peripherals.
 396
 397 config MACH_IMX27_VISSTRIM_M10
 398         bool "Vista Silicon i.MX27 Visstrim_m10"
 399         select IMX_HAVE_PLATFORM_GPIO_KEYS
 400         select IMX_HAVE_PLATFORM_IMX_I2C
 401         select IMX_HAVE_PLATFORM_IMX_SSI
 402         select IMX_HAVE_PLATFORM_IMX_UART
 403         select IMX_HAVE_PLATFORM_MX2_CAMERA
 404         select IMX_HAVE_PLATFORM_MX2_EMMA
 405         select IMX_HAVE_PLATFORM_MXC_EHCI
 406         select IMX_HAVE_PLATFORM_MXC_MMC
 407         select LEDS_GPIO_REGISTER
 408         select SOC_IMX27
 409         help
 410           Include support for Visstrim_m10 platform and its different variants.
 411           This includes specific configurations for the board and its
 412           peripherals.
 413
 414 config MACH_IMX27LITE
 415         bool "LogicPD MX27 LITEKIT platform"
 416         select IMX_HAVE_PLATFORM_IMX_SSI
 417         select IMX_HAVE_PLATFORM_IMX_UART
 418         select SOC_IMX27
 419         help
 420           Include support for MX27 LITEKIT platform. This includes specific
 421           configurations for the board and its peripherals.
 422
 423 config MACH_PCA100
 424         bool "Phytec phyCARD-s (pca100)"
 425         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 426         select IMX_HAVE_PLATFORM_IMX2_WDT
 427         select IMX_HAVE_PLATFORM_IMX_FB
 428         select IMX_HAVE_PLATFORM_IMX_I2C
 429         select IMX_HAVE_PLATFORM_IMX_SSI
 430         select IMX_HAVE_PLATFORM_IMX_UART
 431         select IMX_HAVE_PLATFORM_MXC_EHCI
 432         select IMX_HAVE_PLATFORM_MXC_MMC
 433         select IMX_HAVE_PLATFORM_MXC_NAND
 434         select IMX_HAVE_PLATFORM_MXC_W1
 435         select IMX_HAVE_PLATFORM_SPI_IMX
 436         select MXC_ULPI if USB_ULPI
 437         select SOC_IMX27
 438         help
 439           Include support for phyCARD-s (aka pca100) platform. This
 440           includes specific configurations for the module and its peripherals.
 441
 442 config MACH_MXT_TD60
 443         bool "Maxtrack i-MXT TD60"
 444         select IMX_HAVE_PLATFORM_IMX_FB
 445         select IMX_HAVE_PLATFORM_IMX_I2C
 446         select IMX_HAVE_PLATFORM_IMX_UART
 447         select IMX_HAVE_PLATFORM_MXC_MMC
 448         select IMX_HAVE_PLATFORM_MXC_NAND
 449         select SOC_IMX27
 450         help
 451           Include support for i-MXT (aka td60) platform. This
 452           includes specific configurations for the module and its peripherals.
 453
 454 config MACH_IMX27IPCAM
 455         bool "IMX27 IPCAM platform"
 456         select IMX_HAVE_PLATFORM_IMX2_WDT
 457         select IMX_HAVE_PLATFORM_IMX_UART
 458         select SOC_IMX27
 459         help
 460           Include support for IMX27 IPCAM platform. This includes specific
 461           configurations for the board and its peripherals.
 462
 463 config MACH_IMX27_DT
 464         bool "Support i.MX27 platforms from device tree"
 465         select SOC_IMX27
 466         help
 467           Include support for Freescale i.MX27 based platforms
 468           using the device tree for discovery
 469
 470 endif
 471
 472 if ARCH_MULTI_V6
 473
 474 comment "MX31 platforms:"
 475
 476 config MACH_MX31ADS
 477         bool "Support MX31ADS platforms"
 478         default y
 479         select IMX_HAVE_PLATFORM_IMX_I2C
 480         select IMX_HAVE_PLATFORM_IMX_SSI
 481         select IMX_HAVE_PLATFORM_IMX_UART
 482         select SOC_IMX31
 483         help
 484           Include support for MX31ADS platform. This includes specific
 485           configurations for the board and its peripherals.
 486
 487 config MACH_MX31ADS_WM1133_EV1
 488         bool "Support Wolfson Microelectronics 1133-EV1 module"
 489         depends on MACH_MX31ADS
 490         depends on MFD_WM8350_I2C
 491         depends on REGULATOR_WM8350
 492         select MFD_WM8350_CONFIG_MODE_0
 493         select MFD_WM8352_CONFIG_MODE_0
 494         help
 495           Include support for the Wolfson Microelectronics 1133-EV1 PMU
 496           and audio module for the MX31ADS platform.
 497
 498 config MACH_MX31LILLY
 499         bool "Support MX31 LILLY-1131 platforms (INCO startec)"
 500         select IMX_HAVE_PLATFORM_IMX_UART
 501         select IMX_HAVE_PLATFORM_IPU_CORE
 502         select IMX_HAVE_PLATFORM_MXC_EHCI
 503         select IMX_HAVE_PLATFORM_MXC_MMC
 504         select IMX_HAVE_PLATFORM_SPI_IMX
 505         select MXC_ULPI if USB_ULPI
 506         select SOC_IMX31
 507         help
 508           Include support for mx31 based LILLY1131 modules. This includes
 509           specific configurations for the board and its peripherals.
 510
 511 config MACH_MX31LITE
 512         bool "Support MX31 LITEKIT (LogicPD)"
 513         select IMX_HAVE_PLATFORM_IMX2_WDT
 514         select IMX_HAVE_PLATFORM_IMX_UART
 515         select IMX_HAVE_PLATFORM_MXC_EHCI
 516         select IMX_HAVE_PLATFORM_MXC_MMC
 517         select IMX_HAVE_PLATFORM_MXC_NAND
 518         select IMX_HAVE_PLATFORM_MXC_RTC
 519         select IMX_HAVE_PLATFORM_SPI_IMX
 520         select LEDS_GPIO_REGISTER
 521         select MXC_ULPI if USB_ULPI
 522         select SOC_IMX31
 523         help
 524           Include support for MX31 LITEKIT platform. This includes specific
 525           configurations for the board and its peripherals.
 526
 527 config MACH_PCM037
 528         bool "Support Phytec pcm037 (i.MX31) platforms"
 529         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 530         select IMX_HAVE_PLATFORM_IMX2_WDT
 531         select IMX_HAVE_PLATFORM_IMX_I2C
 532         select IMX_HAVE_PLATFORM_IMX_UART
 533         select IMX_HAVE_PLATFORM_IPU_CORE
 534         select IMX_HAVE_PLATFORM_MXC_EHCI
 535         select IMX_HAVE_PLATFORM_MXC_MMC
 536         select IMX_HAVE_PLATFORM_MXC_NAND
 537         select IMX_HAVE_PLATFORM_MXC_W1
 538         select MXC_ULPI if USB_ULPI
 539         select SOC_IMX31
 540         help
 541           Include support for Phytec pcm037 platform. This includes
 542           specific configurations for the board and its peripherals.
 543
 544 config MACH_PCM037_EET
 545         bool "Support pcm037 EET board extensions"
 546         depends on MACH_PCM037
 547         select IMX_HAVE_PLATFORM_GPIO_KEYS
 548         select IMX_HAVE_PLATFORM_SPI_IMX
 549         help
 550           Add support for PCM037 EET baseboard extensions. If you are using the
 551           OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
 552           command-line parameter.
 553
 554 config MACH_MX31_3DS
 555         bool "Support MX31PDK (3DS)"
 556         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 557         select IMX_HAVE_PLATFORM_IMX2_WDT
 558         select IMX_HAVE_PLATFORM_IMX_I2C
 559         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 560         select IMX_HAVE_PLATFORM_IMX_SSI
 561         select IMX_HAVE_PLATFORM_IMX_UART
 562         select IMX_HAVE_PLATFORM_IPU_CORE
 563         select IMX_HAVE_PLATFORM_MXC_EHCI
 564         select IMX_HAVE_PLATFORM_MXC_MMC
 565         select IMX_HAVE_PLATFORM_MXC_NAND
 566         select IMX_HAVE_PLATFORM_SPI_IMX
 567         select MXC_DEBUG_BOARD
 568         select MXC_ULPI if USB_ULPI
 569         select SOC_IMX31
 570         help
 571           Include support for MX31PDK (3DS) platform. This includes specific
 572           configurations for the board and its peripherals.
 573
 574 config MACH_MX31_3DS_MXC_NAND_USE_BBT
 575         bool "Make the MXC NAND driver use the in flash Bad Block Table"
 576         depends on MACH_MX31_3DS
 577         depends on MTD_NAND_MXC
 578         help
 579           Enable this if you want that the MXC NAND driver uses the in flash
 580           Bad Block Table to know what blocks are bad instead of scanning the
 581           entire flash looking for bad block markers.
 582
 583 config MACH_MX31MOBOARD
 584         bool "Support mx31moboard platforms (EPFL Mobots group)"
 585         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 586         select IMX_HAVE_PLATFORM_IMX2_WDT
 587         select IMX_HAVE_PLATFORM_IMX_I2C
 588         select IMX_HAVE_PLATFORM_IMX_SSI
 589         select IMX_HAVE_PLATFORM_IMX_UART
 590         select IMX_HAVE_PLATFORM_IPU_CORE
 591         select IMX_HAVE_PLATFORM_MXC_EHCI
 592         select IMX_HAVE_PLATFORM_MXC_MMC
 593         select IMX_HAVE_PLATFORM_SPI_IMX
 594         select LEDS_GPIO_REGISTER
 595         select MXC_ULPI if USB_ULPI
 596         select SOC_IMX31
 597         help
 598           Include support for mx31moboard platform. This includes specific
 599           configurations for the board and its peripherals.
 600
 601 config MACH_QONG
 602         bool "Support Dave/DENX QongEVB-LITE platform"
 603         select IMX_HAVE_PLATFORM_IMX2_WDT
 604         select IMX_HAVE_PLATFORM_IMX_UART
 605         select SOC_IMX31
 606         help
 607           Include support for Dave/DENX QongEVB-LITE platform. This includes
 608           specific configurations for the board and its peripherals.
 609
 610 config MACH_ARMADILLO5X0
 611         bool "Support Atmark Armadillo-500 Development Base Board"
 612         select IMX_HAVE_PLATFORM_GPIO_KEYS
 613         select IMX_HAVE_PLATFORM_IMX_I2C
 614         select IMX_HAVE_PLATFORM_IMX_UART
 615         select IMX_HAVE_PLATFORM_IPU_CORE
 616         select IMX_HAVE_PLATFORM_MXC_EHCI
 617         select IMX_HAVE_PLATFORM_MXC_MMC
 618         select IMX_HAVE_PLATFORM_MXC_NAND
 619         select MXC_ULPI if USB_ULPI
 620         select SOC_IMX31
 621         help
 622           Include support for Atmark Armadillo-500 platform. This includes
 623           specific configurations for the board and its peripherals.
 624
 625 config MACH_KZM_ARM11_01
 626         bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
 627         select IMX_HAVE_PLATFORM_IMX_UART
 628         select SOC_IMX31
 629         help
 630           Include support for KZM-ARM11-01. This includes specific
 631           configurations for the board and its peripherals.
 632
 633 config MACH_BUG
 634         bool "Support Buglabs BUGBase platform"
 635         default y
 636         select IMX_HAVE_PLATFORM_IMX_UART
 637         select SOC_IMX31
 638         help
 639           Include support for BUGBase 1.3 platform. This includes specific
 640           configurations for the board and its peripherals.
 641
 642 config MACH_IMX31_DT
 643         bool "Support i.MX31 platforms from device tree"
 644         select SOC_IMX31
 645         help
 646           Include support for Freescale i.MX31 based platforms
 647           using the device tree for discovery.
 648
 649 comment "MX35 platforms:"
 650
 651 config MACH_PCM043
 652         bool "Support Phytec pcm043 (i.MX35) platforms"
 653         select IMX_HAVE_PLATFORM_FLEXCAN
 654         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 655         select IMX_HAVE_PLATFORM_IMX2_WDT
 656         select IMX_HAVE_PLATFORM_IMX_I2C
 657         select IMX_HAVE_PLATFORM_IMX_SSI
 658         select IMX_HAVE_PLATFORM_IMX_UART
 659         select IMX_HAVE_PLATFORM_IPU_CORE
 660         select IMX_HAVE_PLATFORM_MXC_EHCI
 661         select IMX_HAVE_PLATFORM_MXC_NAND
 662         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 663         select MXC_ULPI if USB_ULPI
 664         select SOC_IMX35
 665         help
 666           Include support for Phytec pcm043 platform. This includes
 667           specific configurations for the board and its peripherals.
 668
 669 config MACH_MX35_3DS
 670         bool "Support MX35PDK platform"
 671         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 672         select IMX_HAVE_PLATFORM_IMX2_WDT
 673         select IMX_HAVE_PLATFORM_IMX_FB
 674         select IMX_HAVE_PLATFORM_IMX_I2C
 675         select IMX_HAVE_PLATFORM_IMX_UART
 676         select IMX_HAVE_PLATFORM_IPU_CORE
 677         select IMX_HAVE_PLATFORM_MXC_EHCI
 678         select IMX_HAVE_PLATFORM_MXC_NAND
 679         select IMX_HAVE_PLATFORM_MXC_RTC
 680         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 681         select MXC_DEBUG_BOARD
 682         select SOC_IMX35
 683         help
 684           Include support for MX35PDK platform. This includes specific
 685           configurations for the board and its peripherals.
 686
 687 config MACH_EUKREA_CPUIMX35SD
 688         bool "Support Eukrea CPUIMX35 Platform"
 689         select IMX_HAVE_PLATFORM_FLEXCAN
 690         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 691         select IMX_HAVE_PLATFORM_IMX2_WDT
 692         select IMX_HAVE_PLATFORM_IMX_I2C
 693         select IMX_HAVE_PLATFORM_IMX_UART
 694         select IMX_HAVE_PLATFORM_MXC_EHCI
 695         select IMX_HAVE_PLATFORM_MXC_NAND
 696         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 697         select MXC_ULPI if USB_ULPI
 698         select SOC_IMX35
 699         help
 700           Include support for Eukrea CPUIMX35 platform. This includes
 701           specific configurations for the board and its peripherals.
 702
 703 choice
 704         prompt "Baseboard"
 705         depends on MACH_EUKREA_CPUIMX35SD
 706         default MACH_EUKREA_MBIMXSD35_BASEBOARD
 707
 708 config MACH_EUKREA_MBIMXSD35_BASEBOARD
 709         bool "Eukrea MBIMXSD development board"
 710         select IMX_HAVE_PLATFORM_GPIO_KEYS
 711         select IMX_HAVE_PLATFORM_IMX_SSI
 712         select IMX_HAVE_PLATFORM_IPU_CORE
 713         select IMX_HAVE_PLATFORM_SPI_IMX
 714         select LEDS_GPIO_REGISTER
 715         help
 716           This adds board specific devices that can be found on Eukrea's
 717           MBIMXSD evaluation board.
 718
 719 endchoice
 720
 721 config MACH_VPR200
 722         bool "Support VPR200 platform"
 723         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 724         select IMX_HAVE_PLATFORM_GPIO_KEYS
 725         select IMX_HAVE_PLATFORM_IMX2_WDT
 726         select IMX_HAVE_PLATFORM_IMX_I2C
 727         select IMX_HAVE_PLATFORM_IMX_UART
 728         select IMX_HAVE_PLATFORM_IPU_CORE
 729         select IMX_HAVE_PLATFORM_MXC_EHCI
 730         select IMX_HAVE_PLATFORM_MXC_NAND
 731         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 732         select SOC_IMX35
 733         help
 734           Include support for VPR200 platform. This includes specific
 735           configurations for the board and its peripherals.
 736
 737 endif
 738
 739 if ARCH_MULTI_V7
 740
 741 comment "i.MX5 platforms:"
 742
 743 config MACH_MX50_RDP
 744         bool "Support MX50 reference design platform"
 745         depends on BROKEN
 746         select IMX_HAVE_PLATFORM_IMX_I2C
 747         select IMX_HAVE_PLATFORM_IMX_UART
 748         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 749         select IMX_HAVE_PLATFORM_SPI_IMX
 750         select SOC_IMX50
 751         help
 752           Include support for MX50 reference design platform (RDP) board. This
 753           includes specific configurations for the board and its peripherals.
 754
 755 comment "i.MX51 machines:"
 756
 757 config MACH_IMX51_DT
 758         bool "Support i.MX51 platforms from device tree"
 759         select MACH_MX51_BABBAGE
 760         select SOC_IMX51
 761         help
 762           Include support for Freescale i.MX51 based platforms
 763           using the device tree for discovery
 764
 765 config MACH_MX51_BABBAGE
 766         bool "Support MX51 BABBAGE platforms"
 767         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 768         select IMX_HAVE_PLATFORM_IMX2_WDT
 769         select IMX_HAVE_PLATFORM_IMX_I2C
 770         select IMX_HAVE_PLATFORM_IMX_UART
 771         select IMX_HAVE_PLATFORM_MXC_EHCI
 772         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 773         select IMX_HAVE_PLATFORM_SPI_IMX
 774         select SOC_IMX51
 775         help
 776           Include support for MX51 Babbage platform, also known as MX51EVK in
 777           u-boot. This includes specific configurations for the board and its
 778           peripherals.
 779
 780 config MACH_MX51_3DS
 781         bool "Support MX51PDK (3DS)"
 782         select IMX_HAVE_PLATFORM_IMX2_WDT
 783         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 784         select IMX_HAVE_PLATFORM_IMX_UART
 785         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 786         select IMX_HAVE_PLATFORM_SPI_IMX
 787         select MXC_DEBUG_BOARD
 788         select SOC_IMX51
 789         help
 790           Include support for MX51PDK (3DS) platform. This includes specific
 791           configurations for the board and its peripherals.
 792
 793 config MACH_EUKREA_CPUIMX51SD
 794         bool "Support Eukrea CPUIMX51SD module"
 795         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 796         select IMX_HAVE_PLATFORM_IMX2_WDT
 797         select IMX_HAVE_PLATFORM_IMX_I2C
 798         select IMX_HAVE_PLATFORM_IMX_UART
 799         select IMX_HAVE_PLATFORM_MXC_EHCI
 800         select IMX_HAVE_PLATFORM_MXC_NAND
 801         select IMX_HAVE_PLATFORM_SPI_IMX
 802         select SOC_IMX51
 803         help
 804           Include support for Eukrea CPUIMX51SD platform. This includes
 805           specific configurations for the module and its peripherals.
 806
 807 choice
 808         prompt "Baseboard"
 809         depends on MACH_EUKREA_CPUIMX51SD
 810         default MACH_EUKREA_MBIMXSD51_BASEBOARD
 811
 812 config MACH_EUKREA_MBIMXSD51_BASEBOARD
 813         prompt "Eukrea MBIMXSD development board"
 814         bool
 815         select IMX_HAVE_PLATFORM_IMX_SSI
 816         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 817         select LEDS_GPIO_REGISTER
 818         help
 819           This adds board specific devices that can be found on Eukrea's
 820           MBIMXSD evaluation board.
 821
 822 endchoice
 823
 824 comment "Device tree only"
 825
 826 config  SOC_IMX53
 827         bool "i.MX53 support"
 828         select ARCH_MX5
 829         select ARCH_MX53
 830         select HAVE_CAN_FLEXCAN if CAN
 831         select IMX_HAVE_PLATFORM_IMX2_WDT
 832         select PINCTRL
 833         select PINCTRL_IMX53
 834         select SOC_IMX5
 835
 836         help
 837           This enables support for Freescale i.MX53 processor.
 838
 839 config SOC_IMX6Q
 840         bool "i.MX6 Quad support"
 841         select ARCH_HAS_CPUFREQ
 842         select ARCH_HAS_OPP
 843         select ARM_CPU_SUSPEND if PM
 844         select ARM_ERRATA_754322
 845         select ARM_ERRATA_764369 if SMP
 846         select ARM_ERRATA_775420
 847         select ARM_GIC
 848         select COMMON_CLK
 849         select CPU_V7
 850         select HAVE_ARM_SCU
 851         select HAVE_CAN_FLEXCAN if CAN
 852         select HAVE_IMX_GPC
 853         select HAVE_IMX_MMDC
 854         select HAVE_SMP
 855         select MFD_SYSCON
 856         select PINCTRL
 857         select PINCTRL_IMX6Q
 858         select PL310_ERRATA_588369 if CACHE_PL310
 859         select PL310_ERRATA_727915 if CACHE_PL310
 860         select PL310_ERRATA_769419 if CACHE_PL310
 861         select PM_OPP if PM
 862
 863         help
 864           This enables support for Freescale i.MX6 Quad processor.
 865
 866 endif
 867
 868 source "arch/arm/mach-imx/devices/Kconfig"
 869
 870 endmenu