arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c

   1 /*
   2  * Copyright (C) 2010 Eric Benard - eric@eukrea.com
   3  *
   4  * Based on pcm970-baseboard.c which is :
   5  * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License
   9  * as published by the Free Software Foundation; either version 2
  10  * of the License, or (at your option) any later version.
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public License
  17  * along with this program; if not, write to the Free Software
  18  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
  19  * MA 02110-1301, USA.
  20  */
  21
  22 #include <linux/types.h>
  23 #include <linux/init.h>
  24
  25 #include <linux/gpio.h>
  26 #include <linux/interrupt.h>
  27 #include <linux/leds.h>
  28 #include <linux/platform_device.h>
  29 #include <linux/input.h>
  30 #include <linux/spi/spi.h>
  31 #include <video/platform_lcd.h>
  32 #include <linux/i2c.h>
  33
  34 #include <asm/mach-types.h>
  35 #include <asm/mach/arch.h>
  36 #include <asm/mach/time.h>
  37 #include <asm/mach/map.h>
  38
  39 #include <mach/hardware.h>
  40
  41 #include "common.h"
  42 #include "devices-imx35.h"
  43 #include "iomux-mx35.h"
  44
  45 static const struct fb_videomode fb_modedb[] = {
  46         {
  47                 .name           = "CMO-QVGA",
  48                 .refresh        = 60,
  49                 .xres           = 320,
  50                 .yres           = 240,
  51                 .pixclock       = KHZ2PICOS(6500),
  52                 .left_margin    = 68,
  53                 .right_margin   = 20,
  54                 .upper_margin   = 15,
  55                 .lower_margin   = 4,
  56                 .hsync_len      = 30,
  57                 .vsync_len      = 3,
  58                 .sync           = 0,
  59                 .vmode          = FB_VMODE_NONINTERLACED,
  60                 .flag           = 0,
  61         },
  62         {
  63                 .name           = "DVI-VGA",
  64                 .refresh        = 60,
  65                 .xres           = 640,
  66                 .yres           = 480,
  67                 .pixclock       = 32000,
  68                 .left_margin    = 100,
  69                 .right_margin   = 100,
  70                 .upper_margin   = 7,
  71                 .lower_margin   = 100,
  72                 .hsync_len      = 7,
  73                 .vsync_len      = 7,
  74                 .sync           = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT |
  75                                   FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
  76                 .vmode          = FB_VMODE_NONINTERLACED,
  77                 .flag           = 0,
  78         },
  79         {
  80                 .name           = "DVI-SVGA",
  81                 .refresh        = 60,
  82                 .xres           = 800,
  83                 .yres           = 600,
  84                 .pixclock       = 25000,
  85                 .left_margin    = 75,
  86                 .right_margin   = 75,
  87                 .upper_margin   = 7,
  88                 .lower_margin   = 75,
  89                 .hsync_len      = 7,
  90                 .vsync_len      = 7,
  91                 .sync           = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT |
  92                                   FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
  93                 .vmode          = FB_VMODE_NONINTERLACED,
  94                 .flag           = 0,
  95         },
  96 };
  97
  98 static struct mx3fb_platform_data mx3fb_pdata __initdata = {
  99         .name           = "CMO-QVGA",
 100         .mode           = fb_modedb,
 101         .num_modes      = ARRAY_SIZE(fb_modedb),
 102 };
 103
 104 static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
 105         /* LCD */
 106         MX35_PAD_LD0__IPU_DISPB_DAT_0,
 107         MX35_PAD_LD1__IPU_DISPB_DAT_1,
 108         MX35_PAD_LD2__IPU_DISPB_DAT_2,
 109         MX35_PAD_LD3__IPU_DISPB_DAT_3,
 110         MX35_PAD_LD4__IPU_DISPB_DAT_4,
 111         MX35_PAD_LD5__IPU_DISPB_DAT_5,
 112         MX35_PAD_LD6__IPU_DISPB_DAT_6,
 113         MX35_PAD_LD7__IPU_DISPB_DAT_7,
 114         MX35_PAD_LD8__IPU_DISPB_DAT_8,
 115         MX35_PAD_LD9__IPU_DISPB_DAT_9,
 116         MX35_PAD_LD10__IPU_DISPB_DAT_10,
 117         MX35_PAD_LD11__IPU_DISPB_DAT_11,
 118         MX35_PAD_LD12__IPU_DISPB_DAT_12,
 119         MX35_PAD_LD13__IPU_DISPB_DAT_13,
 120         MX35_PAD_LD14__IPU_DISPB_DAT_14,
 121         MX35_PAD_LD15__IPU_DISPB_DAT_15,
 122         MX35_PAD_LD16__IPU_DISPB_DAT_16,
 123         MX35_PAD_LD17__IPU_DISPB_DAT_17,
 124         MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
 125         MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
 126         MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
 127         MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
 128         /* Backlight */
 129         MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
 130         /* LCD_PWR */
 131         MX35_PAD_D3_CLS__GPIO1_4,
 132         /* LED */
 133         MX35_PAD_LD23__GPIO3_29,
 134         /* SWITCH */
 135         MX35_PAD_LD19__GPIO3_25,
 136         /* UART2 */
 137         MX35_PAD_CTS2__UART2_CTS,
 138         MX35_PAD_RTS2__UART2_RTS,
 139         MX35_PAD_TXD2__UART2_TXD_MUX,
 140         MX35_PAD_RXD2__UART2_RXD_MUX,
 141         /* I2S */
 142         MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS,
 143         MX35_PAD_STXD4__AUDMUX_AUD4_TXD,
 144         MX35_PAD_SRXD4__AUDMUX_AUD4_RXD,
 145         MX35_PAD_SCK4__AUDMUX_AUD4_TXC,
 146         /* CAN2 */
 147         MX35_PAD_TX5_RX0__CAN2_TXCAN,
 148         MX35_PAD_TX4_RX1__CAN2_RXCAN,
 149         /* SDCARD */
 150         MX35_PAD_SD1_CMD__ESDHC1_CMD,
 151         MX35_PAD_SD1_CLK__ESDHC1_CLK,
 152         MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
 153         MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
 154         MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
 155         MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
 156         /* SD1 CD */
 157         MX35_PAD_LD18__GPIO3_24,
 158         /* SPI */
 159         MX35_PAD_CSPI1_MOSI__CSPI1_MOSI,
 160         MX35_PAD_CSPI1_MISO__CSPI1_MISO,
 161         MX35_PAD_CSPI1_SS0__GPIO1_18,
 162         MX35_PAD_CSPI1_SS1__GPIO1_19,
 163         MX35_PAD_CSPI1_SCLK__CSPI1_SCLK,
 164         MX35_PAD_CSPI1_SPI_RDY__GPIO3_5,
 165 };
 166
 167 #define GPIO_LED1       IMX_GPIO_NR(3, 29)
 168 #define GPIO_SWITCH1    IMX_GPIO_NR(3, 25)
 169 #define GPIO_LCDPWR     IMX_GPIO_NR(1, 4)
 170 #define GPIO_SD1CD      IMX_GPIO_NR(3, 24)
 171 #define GPIO_SPI1_SS0   IMX_GPIO_NR(1, 18)
 172 #define GPIO_SPI1_SS1   IMX_GPIO_NR(1, 19)
 173 #define GPIO_SPI1_IRQ   IMX_GPIO_NR(3, 5)
 174
 175 static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
 176                                    unsigned int power)
 177 {
 178         if (power)
 179                 gpio_direction_output(GPIO_LCDPWR, 1);
 180         else
 181                 gpio_direction_output(GPIO_LCDPWR, 0);
 182 }
 183
 184 static struct plat_lcd_data eukrea_mbimxsd_lcd_power_data = {
 185         .set_power              = eukrea_mbimxsd_lcd_power_set,
 186 };
 187
 188 static struct platform_device eukrea_mbimxsd_lcd_powerdev = {
 189         .name                   = "platform-lcd",
 190         .dev.platform_data      = &eukrea_mbimxsd_lcd_power_data,
 191 };
 192
 193 static struct gpio_led eukrea_mbimxsd_leds[] = {
 194         {
 195                 .name                   = "led1",
 196                 .default_trigger        = "heartbeat",
 197                 .active_low             = 1,
 198                 .gpio                   = GPIO_LED1,
 199         },
 200 };
 201
 202 static const struct gpio_led_platform_data
 203                 eukrea_mbimxsd_led_info __initconst = {
 204         .leds           = eukrea_mbimxsd_leds,
 205         .num_leds       = ARRAY_SIZE(eukrea_mbimxsd_leds),
 206 };
 207
 208 static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
 209         {
 210                 .gpio           = GPIO_SWITCH1,
 211                 .code           = BTN_0,
 212                 .desc           = "BP1",
 213                 .active_low     = 1,
 214                 .wakeup         = 1,
 215         },
 216 };
 217
 218 static const struct gpio_keys_platform_data
 219                 eukrea_mbimxsd_button_data __initconst = {
 220         .buttons        = eukrea_mbimxsd_gpio_buttons,
 221         .nbuttons       = ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
 222 };
 223
 224 static struct platform_device *platform_devices[] __initdata = {
 225         &eukrea_mbimxsd_lcd_powerdev,
 226 };
 227
 228 static const struct imxuart_platform_data uart_pdata __initconst = {
 229         .flags = IMXUART_HAVE_RTSCTS,
 230 };
 231
 232 static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
 233         {
 234                 I2C_BOARD_INFO("tlv320aic23", 0x1a),
 235         },
 236 };
 237
 238 static const
 239 struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = {
 240         .flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
 241 };
 242
 243 static struct esdhc_platform_data sd1_pdata = {
 244         .cd_gpio = GPIO_SD1CD,
 245         .cd_type = ESDHC_CD_GPIO,
 246         .wp_type = ESDHC_WP_NONE,
 247 };
 248
 249 static struct spi_board_info eukrea_mbimxsd35_spi_board_info[] __initdata = {
 250         {
 251                 .modalias = "spidev",
 252                 .max_speed_hz = 20000000,
 253                 .bus_num = 0,
 254                 .chip_select = 0,
 255                 .mode = SPI_MODE_0,
 256         },
 257         {
 258                 .modalias = "spidev",
 259                 .max_speed_hz = 20000000,
 260                 .bus_num = 0,
 261                 .chip_select = 1,
 262                 .mode = SPI_MODE_0,
 263         },
 264 };
 265
 266 static int eukrea_mbimxsd35_spi_cs[] = {GPIO_SPI1_SS0, GPIO_SPI1_SS1};
 267
 268 static const struct spi_imx_master eukrea_mbimxsd35_spi0_data __initconst = {
 269         .chipselect     = eukrea_mbimxsd35_spi_cs,
 270         .num_chipselect = ARRAY_SIZE(eukrea_mbimxsd35_spi_cs),
 271 };
 272
 273 /*
 274  * system init for baseboard usage. Will be called by cpuimx35 init.
 275  *
 276  * Add platform devices present on this baseboard and init
 277  * them from CPU side as far as required to use them later on
 278  */
 279 void __init eukrea_mbimxsd35_baseboard_init(void)
 280 {
 281         if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
 282                         ARRAY_SIZE(eukrea_mbimxsd_pads)))
 283                 printk(KERN_ERR "error setting mbimxsd pads !\n");
 284
 285         imx35_add_imx_uart1(&uart_pdata);
 286         imx35_add_ipu_core();
 287         imx35_add_mx3_sdc_fb(&mx3fb_pdata);
 288
 289         imx35_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
 290
 291         imx35_add_flexcan1(NULL);
 292         imx35_add_sdhci_esdhc_imx(0, &sd1_pdata);
 293
 294         gpio_request(GPIO_LED1, "LED1");
 295         gpio_direction_output(GPIO_LED1, 1);
 296         gpio_free(GPIO_LED1);
 297
 298         gpio_request(GPIO_SWITCH1, "SWITCH1");
 299         gpio_direction_input(GPIO_SWITCH1);
 300         gpio_free(GPIO_SWITCH1);
 301
 302         gpio_request(GPIO_LCDPWR, "LCDPWR");
 303         gpio_direction_output(GPIO_LCDPWR, 1);
 304
 305         i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
 306                                 ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
 307
 308         gpio_request(GPIO_SPI1_IRQ, "SPI1_IRQ");
 309         gpio_direction_input(GPIO_SPI1_IRQ);
 310         gpio_free(GPIO_SPI1_IRQ);
 311         imx35_add_spi_imx0(&eukrea_mbimxsd35_spi0_data);
 312         spi_register_board_info(eukrea_mbimxsd35_spi_board_info,
 313                 ARRAY_SIZE(eukrea_mbimxsd35_spi_board_info));
 314
 315         platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 316         gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
 317         imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
 318         imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0);
 319 }