arch/arm/mach-ixp2000/ixdp2x01.c

   1 /*
   2  * arch/arm/mach-ixp2000/ixdp2x01.c
   3  *
   4  * Code common to Intel IXDP2401 and IXDP2801 platforms
   5  *
   6  * Original Author: Andrzej Mialkowski <andrzej.mialkowski@intel.com>
   7  * Maintainer: Deepak Saxena <dsaxena@plexity.net>
   8  *
   9  * Copyright (C) 2002-2003 Intel Corp.
  10  * Copyright (C) 2003-2004 MontaVista Software, Inc.
  11  *
  12  *  This program is free software; you can redistribute  it and/or modify it
  13  *  under  the terms of  the GNU General  Public License as published by the
  14  *  Free Software Foundation;  either version 2 of the  License, or (at your
  15  *  option) any later version.
  16  */
  17
  18 #include <linux/config.h>
  19 #include <linux/kernel.h>
  20 #include <linux/init.h>
  21 #include <linux/mm.h>
  22 #include <linux/sched.h>
  23 #include <linux/interrupt.h>
  24 #include <linux/bitops.h>
  25 #include <linux/pci.h>
  26 #include <linux/ioport.h>
  27 #include <linux/slab.h>
  28 #include <linux/delay.h>
  29 #include <linux/serial.h>
  30 #include <linux/tty.h>
  31 #include <linux/serial_core.h>
  32 #include <linux/platform_device.h>
  33
  34 #include <asm/io.h>
  35 #include <asm/irq.h>
  36 #include <asm/pgtable.h>
  37 #include <asm/page.h>
  38 #include <asm/system.h>
  39 #include <asm/hardware.h>
  40 #include <asm/mach-types.h>
  41
  42 #include <asm/mach/pci.h>
  43 #include <asm/mach/map.h>
  44 #include <asm/mach/irq.h>
  45 #include <asm/mach/time.h>
  46 #include <asm/mach/arch.h>
  47 #include <asm/mach/flash.h>
  48
  49 /*************************************************************************
  50  * IXDP2x01 IRQ Handling
  51  *************************************************************************/
  52 static void ixdp2x01_irq_mask(unsigned int irq)
  53 {
  54         ixp2000_reg_wrb(IXDP2X01_INT_MASK_SET_REG,
  55                                 IXP2000_BOARD_IRQ_MASK(irq));
  56 }
  57
  58 static void ixdp2x01_irq_unmask(unsigned int irq)
  59 {
  60         ixp2000_reg_write(IXDP2X01_INT_MASK_CLR_REG,
  61                                 IXP2000_BOARD_IRQ_MASK(irq));
  62 }
  63
  64 static u32 valid_irq_mask;
  65
  66 static void ixdp2x01_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
  67 {
  68         u32 ex_interrupt;
  69         int i;
  70
  71         desc->chip->mask(irq);
  72
  73         ex_interrupt = *IXDP2X01_INT_STAT_REG & valid_irq_mask;
  74
  75         if (!ex_interrupt) {
  76                 printk(KERN_ERR "Spurious IXDP2X01 CPLD interrupt!\n");
  77                 return;
  78         }
  79
  80         for (i = 0; i < IXP2000_BOARD_IRQS; i++) {
  81                 if (ex_interrupt & (1 << i)) {
  82                         struct irqdesc *cpld_desc;
  83                         int cpld_irq = IXP2000_BOARD_IRQ(0) + i;
  84                         cpld_desc = irq_desc + cpld_irq;
  85                         desc_handle_irq(cpld_irq, cpld_desc, regs);
  86                 }
  87         }
  88
  89         desc->chip->unmask(irq);
  90 }
  91
  92 static struct irqchip ixdp2x01_irq_chip = {
  93         .mask   = ixdp2x01_irq_mask,
  94         .ack    = ixdp2x01_irq_mask,
  95         .unmask = ixdp2x01_irq_unmask
  96 };
  97
  98 /*
  99  * We only do anything if we are the master NPU on the board.
 100  * The slave NPU only has the ethernet chip going directly to
 101  * the PCIB interrupt input.
 102  */
 103 void __init ixdp2x01_init_irq(void)
 104 {
 105         int irq = 0;
 106
 107         /* initialize chip specific interrupts */
 108         ixp2000_init_irq();
 109
 110         if (machine_is_ixdp2401())
 111                 valid_irq_mask = IXDP2401_VALID_IRQ_MASK;
 112         else
 113                 valid_irq_mask = IXDP2801_VALID_IRQ_MASK;
 114
 115         /* Mask all interrupts from CPLD, disable simulation */
 116         ixp2000_reg_write(IXDP2X01_INT_MASK_SET_REG, 0xffffffff);
 117         ixp2000_reg_wrb(IXDP2X01_INT_SIM_REG, 0);
 118
 119         for (irq = NR_IXP2000_IRQS; irq < NR_IXDP2X01_IRQS; irq++) {
 120                 if (irq & valid_irq_mask) {
 121                         set_irq_chip(irq, &ixdp2x01_irq_chip);
 122                         set_irq_handler(irq, do_level_IRQ);
 123                         set_irq_flags(irq, IRQF_VALID);
 124                 } else {
 125                         set_irq_flags(irq, 0);
 126                 }
 127         }
 128
 129         /* Hook into PCI interrupts */
 130         set_irq_chained_handler(IRQ_IXP2000_PCIB, &ixdp2x01_irq_handler);
 131 }
 132
 133
 134 /*************************************************************************
 135  * IXDP2x01 memory map and serial ports
 136  *************************************************************************/
 137 static struct map_desc ixdp2x01_io_desc __initdata = {
 138         .virtual        = IXDP2X01_VIRT_CPLD_BASE,
 139         .pfn            = __phys_to_pfn(IXDP2X01_PHYS_CPLD_BASE),
 140         .length         = IXDP2X01_CPLD_REGION_SIZE,
 141         .type           = MT_DEVICE
 142 };
 143
 144 static struct uart_port ixdp2x01_serial_ports[2] = {
 145         {
 146                 .membase        = (char *)(IXDP2X01_UART1_VIRT_BASE),
 147                 .mapbase        = (unsigned long)IXDP2X01_UART1_PHYS_BASE,
 148                 .irq            = IRQ_IXDP2X01_UART1,
 149                 .flags          = UPF_SKIP_TEST,
 150                 .iotype         = UPIO_MEM32,
 151                 .regshift       = 2,
 152                 .uartclk        = IXDP2X01_UART_CLK,
 153                 .line           = 1,
 154                 .type           = PORT_16550A,
 155                 .fifosize       = 16
 156         }, {
 157                 .membase        = (char *)(IXDP2X01_UART2_VIRT_BASE),
 158                 .mapbase        = (unsigned long)IXDP2X01_UART2_PHYS_BASE,
 159                 .irq            = IRQ_IXDP2X01_UART2,
 160                 .flags          = UPF_SKIP_TEST,
 161                 .iotype         = UPIO_MEM32,
 162                 .regshift       = 2,
 163                 .uartclk        = IXDP2X01_UART_CLK,
 164                 .line           = 2,
 165                 .type           = PORT_16550A,
 166                 .fifosize       = 16
 167         },
 168 };
 169
 170 static void __init ixdp2x01_map_io(void)
 171 {
 172         ixp2000_map_io();
 173
 174         iotable_init(&ixdp2x01_io_desc, 1);
 175
 176         early_serial_setup(&ixdp2x01_serial_ports[0]);
 177         early_serial_setup(&ixdp2x01_serial_ports[1]);
 178 }
 179
 180
 181 /*************************************************************************
 182  * IXDP2x01 timer tick configuration
 183  *************************************************************************/
 184 static unsigned int ixdp2x01_clock;
 185
 186 static int __init ixdp2x01_clock_setup(char *str)
 187 {
 188         ixdp2x01_clock = simple_strtoul(str, NULL, 10);
 189
 190         return 1;
 191 }
 192
 193 __setup("ixdp2x01_clock=", ixdp2x01_clock_setup);
 194
 195 static void __init ixdp2x01_timer_init(void)
 196 {
 197         if (!ixdp2x01_clock)
 198                 ixdp2x01_clock = 50000000;
 199
 200         ixp2000_init_time(ixdp2x01_clock);
 201 }
 202
 203 static struct sys_timer ixdp2x01_timer = {
 204         .init           = ixdp2x01_timer_init,
 205         .offset         = ixp2000_gettimeoffset,
 206 };
 207
 208 /*************************************************************************
 209  * IXDP2x01 PCI
 210  *************************************************************************/
 211 void __init ixdp2x01_pci_preinit(void)
 212 {
 213         ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00000000);
 214         ixp2000_pci_preinit();
 215         pcibios_setup("firmware");
 216 }
 217
 218 #define DEVPIN(dev, pin) ((pin) | ((dev) << 3))
 219
 220 static int __init ixdp2x01_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 221 {
 222         u8 bus = dev->bus->number;
 223         u32 devpin = DEVPIN(PCI_SLOT(dev->devfn), pin);
 224         struct pci_bus *tmp_bus = dev->bus;
 225
 226         /* Primary bus, no interrupts here */
 227         if (bus == 0) {
 228                 return -1;
 229         }
 230
 231         /* Lookup first leaf in bus tree */
 232         while ((tmp_bus->parent != NULL) && (tmp_bus->parent->parent != NULL)) {
 233                 tmp_bus = tmp_bus->parent;
 234         }
 235
 236         /* Select between known bridges */
 237         switch (tmp_bus->self->devfn | (tmp_bus->self->bus->number << 8)) {
 238         /* Device is located after first MB bridge */
 239         case 0x0008:
 240                 if (tmp_bus == dev->bus) {
 241                         /* Device is located directy after first MB bridge */
 242                         switch (devpin) {
 243                         case DEVPIN(1, 1):      /* Onboard 82546 ch 0 */
 244                                 if (machine_is_ixdp2401())
 245                                         return IRQ_IXDP2401_INTA_82546;
 246                                 return -1;
 247                         case DEVPIN(1, 2):      /* Onboard 82546 ch 1 */
 248                                 if (machine_is_ixdp2401())
 249                                         return IRQ_IXDP2401_INTB_82546;
 250                                 return -1;
 251                         case DEVPIN(0, 1):      /* PMC INTA# */
 252                                 return IRQ_IXDP2X01_SPCI_PMC_INTA;
 253                         case DEVPIN(0, 2):      /* PMC INTB# */
 254                                 return IRQ_IXDP2X01_SPCI_PMC_INTB;
 255                         case DEVPIN(0, 3):      /* PMC INTC# */
 256                                 return IRQ_IXDP2X01_SPCI_PMC_INTC;
 257                         case DEVPIN(0, 4):      /* PMC INTD# */
 258                                 return IRQ_IXDP2X01_SPCI_PMC_INTD;
 259                         }
 260                 }
 261                 break;
 262         case 0x0010:
 263                 if (tmp_bus == dev->bus) {
 264                         /* Device is located directy after second MB bridge */
 265                         /* Secondary bus of second bridge */
 266                         switch (devpin) {
 267                         case DEVPIN(0, 1):      /* DB#0 */
 268                                 return IRQ_IXDP2X01_SPCI_DB_0;
 269                         case DEVPIN(1, 1):      /* DB#1 */
 270                                 return IRQ_IXDP2X01_SPCI_DB_1;
 271                         }
 272                 } else {
 273                         /* Device is located indirectly after second MB bridge */
 274                         /* Not supported now */
 275                 }
 276                 break;
 277         }
 278
 279         return -1;
 280 }
 281
 282
 283 static int ixdp2x01_pci_setup(int nr, struct pci_sys_data *sys)
 284 {
 285         sys->mem_offset = 0xe0000000;
 286
 287         if (machine_is_ixdp2801())
 288                 sys->mem_offset -= ((*IXP2000_PCI_ADDR_EXT & 0xE000) << 16);
 289
 290         return ixp2000_pci_setup(nr, sys);
 291 }
 292
 293 struct hw_pci ixdp2x01_pci __initdata = {
 294         .nr_controllers = 1,
 295         .setup          = ixdp2x01_pci_setup,
 296         .preinit        = ixdp2x01_pci_preinit,
 297         .scan           = ixp2000_pci_scan_bus,
 298         .map_irq        = ixdp2x01_pci_map_irq,
 299 };
 300
 301 int __init ixdp2x01_pci_init(void)
 302 {
 303         if (machine_is_ixdp2401() || machine_is_ixdp2801())
 304                 pci_common_init(&ixdp2x01_pci);
 305
 306         return 0;
 307 }
 308
 309 subsys_initcall(ixdp2x01_pci_init);
 310
 311 /*************************************************************************
 312  * IXDP2x01 Machine Intialization
 313  *************************************************************************/
 314 static struct flash_platform_data ixdp2x01_flash_platform_data = {
 315         .map_name       = "cfi_probe",
 316         .width          = 1,
 317 };
 318
 319 static unsigned long ixdp2x01_flash_bank_setup(unsigned long ofs)
 320 {
 321         ixp2000_reg_wrb(IXDP2X01_CPLD_FLASH_REG,
 322                 ((ofs >> IXDP2X01_FLASH_WINDOW_BITS) | IXDP2X01_CPLD_FLASH_INTERN));
 323         return (ofs & IXDP2X01_FLASH_WINDOW_MASK);
 324 }
 325
 326 static struct ixp2000_flash_data ixdp2x01_flash_data = {
 327         .platform_data  = &ixdp2x01_flash_platform_data,
 328         .bank_setup     = ixdp2x01_flash_bank_setup
 329 };
 330
 331 static struct resource ixdp2x01_flash_resource = {
 332         .start          = 0xc4000000,
 333         .end            = 0xc4000000 + 0x01ffffff,
 334         .flags          = IORESOURCE_MEM,
 335 };
 336
 337 static struct platform_device ixdp2x01_flash = {
 338         .name           = "IXP2000-Flash",
 339         .id             = 0,
 340         .dev            = {
 341                 .platform_data = &ixdp2x01_flash_data,
 342         },
 343         .num_resources  = 1,
 344         .resource       = &ixdp2x01_flash_resource,
 345 };
 346
 347 static struct ixp2000_i2c_pins ixdp2x01_i2c_gpio_pins = {
 348         .sda_pin        = IXDP2X01_GPIO_SDA,
 349         .scl_pin        = IXDP2X01_GPIO_SCL,
 350 };
 351
 352 static struct platform_device ixdp2x01_i2c_controller = {
 353         .name           = "IXP2000-I2C",
 354         .id             = 0,
 355         .dev            = {
 356                 .platform_data = &ixdp2x01_i2c_gpio_pins,
 357         },
 358         .num_resources  = 0
 359 };
 360
 361 static struct platform_device *ixdp2x01_devices[] __initdata = {
 362         &ixdp2x01_flash,
 363         &ixdp2x01_i2c_controller
 364 };
 365
 366 static void __init ixdp2x01_init_machine(void)
 367 {
 368         ixp2000_reg_wrb(IXDP2X01_CPLD_FLASH_REG,
 369                 (IXDP2X01_CPLD_FLASH_BANK_MASK | IXDP2X01_CPLD_FLASH_INTERN));
 370
 371         ixdp2x01_flash_data.nr_banks =
 372                 ((*IXDP2X01_CPLD_FLASH_REG & IXDP2X01_CPLD_FLASH_BANK_MASK) + 1);
 373
 374         platform_add_devices(ixdp2x01_devices, ARRAY_SIZE(ixdp2x01_devices));
 375         ixp2000_uart_init();
 376 }
 377
 378
 379 #ifdef CONFIG_ARCH_IXDP2401
 380 MACHINE_START(IXDP2401, "Intel IXDP2401 Development Platform")
 381         /* Maintainer: MontaVista Software, Inc. */
 382         .phys_io        = IXP2000_UART_PHYS_BASE,
 383         .io_pg_offst    = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
 384         .boot_params    = 0x00000100,
 385         .map_io         = ixdp2x01_map_io,
 386         .init_irq       = ixdp2x01_init_irq,
 387         .timer          = &ixdp2x01_timer,
 388         .init_machine   = ixdp2x01_init_machine,
 389 MACHINE_END
 390 #endif
 391
 392 #ifdef CONFIG_ARCH_IXDP2801
 393 MACHINE_START(IXDP2801, "Intel IXDP2801 Development Platform")
 394         /* Maintainer: MontaVista Software, Inc. */
 395         .phys_io        = IXP2000_UART_PHYS_BASE,
 396         .io_pg_offst    = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
 397         .boot_params    = 0x00000100,
 398         .map_io         = ixdp2x01_map_io,
 399         .init_irq       = ixdp2x01_init_irq,
 400         .timer          = &ixdp2x01_timer,
 401         .init_machine   = ixdp2x01_init_machine,
 402 MACHINE_END
 403 #endif
 404
 405