arch/arm/mach-ixp2000/ixdp2x01.c

   1 /*
   2  * arch/arm/mach-ixp2000/ixdp2x01.c
   3  *
   4  * Code common to Intel IXDP2401 and IXDP2801 platforms
   5  *
   6  * Original Author: Andrzej Mialkowski <andrzej.mialkowski@intel.com>
   7  * Maintainer: Deepak Saxena <dsaxena@plexity.net>
   8  *
   9  * Copyright (C) 2002-2003 Intel Corp.
  10  * Copyright (C) 2003-2004 MontaVista Software, Inc.
  11  *
  12  *  This program is free software; you can redistribute  it and/or modify it
  13  *  under  the terms of  the GNU General  Public License as published by the
  14  *  Free Software Foundation;  either version 2 of the  License, or (at your
  15  *  option) any later version.
  16  */
  17
  18 #include <linux/kernel.h>
  19 #include <linux/init.h>
  20 #include <linux/mm.h>
  21 #include <linux/sched.h>
  22 #include <linux/interrupt.h>
  23 #include <linux/bitops.h>
  24 #include <linux/pci.h>
  25 #include <linux/ioport.h>
  26 #include <linux/slab.h>
  27 #include <linux/delay.h>
  28 #include <linux/serial.h>
  29 #include <linux/tty.h>
  30 #include <linux/serial_core.h>
  31 #include <linux/platform_device.h>
  32 #include <linux/serial_8250.h>
  33
  34 #include <asm/io.h>
  35 #include <asm/irq.h>
  36 #include <asm/pgtable.h>
  37 #include <asm/page.h>
  38 #include <asm/system.h>
  39 #include <asm/hardware.h>
  40 #include <asm/mach-types.h>
  41
  42 #include <asm/mach/pci.h>
  43 #include <asm/mach/map.h>
  44 #include <asm/mach/irq.h>
  45 #include <asm/mach/time.h>
  46 #include <asm/mach/arch.h>
  47 #include <asm/mach/flash.h>
  48
  49 /*************************************************************************
  50  * IXDP2x01 IRQ Handling
  51  *************************************************************************/
  52 static void ixdp2x01_irq_mask(unsigned int irq)
  53 {
  54         ixp2000_reg_wrb(IXDP2X01_INT_MASK_SET_REG,
  55                                 IXP2000_BOARD_IRQ_MASK(irq));
  56 }
  57
  58 static void ixdp2x01_irq_unmask(unsigned int irq)
  59 {
  60         ixp2000_reg_write(IXDP2X01_INT_MASK_CLR_REG,
  61                                 IXP2000_BOARD_IRQ_MASK(irq));
  62 }
  63
  64 static u32 valid_irq_mask;
  65
  66 static void ixdp2x01_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
  67 {
  68         u32 ex_interrupt;
  69         int i;
  70
  71         desc->chip->mask(irq);
  72
  73         ex_interrupt = *IXDP2X01_INT_STAT_REG & valid_irq_mask;
  74
  75         if (!ex_interrupt) {
  76                 printk(KERN_ERR "Spurious IXDP2X01 CPLD interrupt!\n");
  77                 return;
  78         }
  79
  80         for (i = 0; i < IXP2000_BOARD_IRQS; i++) {
  81                 if (ex_interrupt & (1 << i)) {
  82                         struct irqdesc *cpld_desc;
  83                         int cpld_irq = IXP2000_BOARD_IRQ(0) + i;
  84                         cpld_desc = irq_desc + cpld_irq;
  85                         desc_handle_irq(cpld_irq, cpld_desc, regs);
  86                 }
  87         }
  88
  89         desc->chip->unmask(irq);
  90 }
  91
  92 static struct irqchip ixdp2x01_irq_chip = {
  93         .mask   = ixdp2x01_irq_mask,
  94         .ack    = ixdp2x01_irq_mask,
  95         .unmask = ixdp2x01_irq_unmask
  96 };
  97
  98 /*
  99  * We only do anything if we are the master NPU on the board.
 100  * The slave NPU only has the ethernet chip going directly to
 101  * the PCIB interrupt input.
 102  */
 103 void __init ixdp2x01_init_irq(void)
 104 {
 105         int irq = 0;
 106
 107         /* initialize chip specific interrupts */
 108         ixp2000_init_irq();
 109
 110         if (machine_is_ixdp2401())
 111                 valid_irq_mask = IXDP2401_VALID_IRQ_MASK;
 112         else
 113                 valid_irq_mask = IXDP2801_VALID_IRQ_MASK;
 114
 115         /* Mask all interrupts from CPLD, disable simulation */
 116         ixp2000_reg_write(IXDP2X01_INT_MASK_SET_REG, 0xffffffff);
 117         ixp2000_reg_wrb(IXDP2X01_INT_SIM_REG, 0);
 118
 119         for (irq = NR_IXP2000_IRQS; irq < NR_IXDP2X01_IRQS; irq++) {
 120                 if (irq & valid_irq_mask) {
 121                         set_irq_chip(irq, &ixdp2x01_irq_chip);
 122                         set_irq_handler(irq, do_level_IRQ);
 123                         set_irq_flags(irq, IRQF_VALID);
 124                 } else {
 125                         set_irq_flags(irq, 0);
 126                 }
 127         }
 128
 129         /* Hook into PCI interrupts */
 130         set_irq_chained_handler(IRQ_IXP2000_PCIB, ixdp2x01_irq_handler);
 131 }
 132
 133
 134 /*************************************************************************
 135  * IXDP2x01 memory map
 136  *************************************************************************/
 137 static struct map_desc ixdp2x01_io_desc __initdata = {
 138         .virtual        = IXDP2X01_VIRT_CPLD_BASE,
 139         .pfn            = __phys_to_pfn(IXDP2X01_PHYS_CPLD_BASE),
 140         .length         = IXDP2X01_CPLD_REGION_SIZE,
 141         .type           = MT_DEVICE
 142 };
 143
 144 static void __init ixdp2x01_map_io(void)
 145 {
 146         ixp2000_map_io();
 147         iotable_init(&ixdp2x01_io_desc, 1);
 148 }
 149
 150
 151 /*************************************************************************
 152  * IXDP2x01 serial ports
 153  *************************************************************************/
 154 static struct plat_serial8250_port ixdp2x01_serial_port1[] = {
 155         {
 156                 .mapbase        = (unsigned long)IXDP2X01_UART1_PHYS_BASE,
 157                 .membase        = (char *)IXDP2X01_UART1_VIRT_BASE,
 158                 .irq            = IRQ_IXDP2X01_UART1,
 159                 .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 160                 .iotype         = UPIO_MEM32,
 161                 .regshift       = 2,
 162                 .uartclk        = IXDP2X01_UART_CLK,
 163         },
 164         { }
 165 };
 166
 167 static struct resource ixdp2x01_uart_resource1 = {
 168         .start          = IXDP2X01_UART1_PHYS_BASE,
 169         .end            = IXDP2X01_UART1_PHYS_BASE + 0xffff,
 170         .flags          = IORESOURCE_MEM,
 171 };
 172
 173 static struct platform_device ixdp2x01_serial_device1 = {
 174         .name           = "serial8250",
 175         .id             = PLAT8250_DEV_PLATFORM1,
 176         .dev            = {
 177                 .platform_data          = ixdp2x01_serial_port1,
 178         },
 179         .num_resources  = 1,
 180         .resource       = &ixdp2x01_uart_resource1,
 181 };
 182
 183 static struct plat_serial8250_port ixdp2x01_serial_port2[] = {
 184         {
 185                 .mapbase        = (unsigned long)IXDP2X01_UART2_PHYS_BASE,
 186                 .membase        = (char *)IXDP2X01_UART2_VIRT_BASE,
 187                 .irq            = IRQ_IXDP2X01_UART2,
 188                 .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 189                 .iotype         = UPIO_MEM32,
 190                 .regshift       = 2,
 191                 .uartclk        = IXDP2X01_UART_CLK,
 192         },
 193         { }
 194 };
 195
 196 static struct resource ixdp2x01_uart_resource2 = {
 197         .start          = IXDP2X01_UART2_PHYS_BASE,
 198         .end            = IXDP2X01_UART2_PHYS_BASE + 0xffff,
 199         .flags          = IORESOURCE_MEM,
 200 };
 201
 202 static struct platform_device ixdp2x01_serial_device2 = {
 203         .name           = "serial8250",
 204         .id             = PLAT8250_DEV_PLATFORM2,
 205         .dev            = {
 206                 .platform_data          = ixdp2x01_serial_port2,
 207         },
 208         .num_resources  = 1,
 209         .resource       = &ixdp2x01_uart_resource2,
 210 };
 211
 212 static void ixdp2x01_uart_init(void)
 213 {
 214         platform_device_register(&ixdp2x01_serial_device1);
 215         platform_device_register(&ixdp2x01_serial_device2);
 216 }
 217
 218
 219 /*************************************************************************
 220  * IXDP2x01 timer tick configuration
 221  *************************************************************************/
 222 static unsigned int ixdp2x01_clock;
 223
 224 static int __init ixdp2x01_clock_setup(char *str)
 225 {
 226         ixdp2x01_clock = simple_strtoul(str, NULL, 10);
 227
 228         return 1;
 229 }
 230
 231 __setup("ixdp2x01_clock=", ixdp2x01_clock_setup);
 232
 233 static void __init ixdp2x01_timer_init(void)
 234 {
 235         if (!ixdp2x01_clock)
 236                 ixdp2x01_clock = 50000000;
 237
 238         ixp2000_init_time(ixdp2x01_clock);
 239 }
 240
 241 static struct sys_timer ixdp2x01_timer = {
 242         .init           = ixdp2x01_timer_init,
 243         .offset         = ixp2000_gettimeoffset,
 244 };
 245
 246 /*************************************************************************
 247  * IXDP2x01 PCI
 248  *************************************************************************/
 249 void __init ixdp2x01_pci_preinit(void)
 250 {
 251         ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00000000);
 252         ixp2000_pci_preinit();
 253         pcibios_setup("firmware");
 254 }
 255
 256 #define DEVPIN(dev, pin) ((pin) | ((dev) << 3))
 257
 258 static int __init ixdp2x01_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 259 {
 260         u8 bus = dev->bus->number;
 261         u32 devpin = DEVPIN(PCI_SLOT(dev->devfn), pin);
 262         struct pci_bus *tmp_bus = dev->bus;
 263
 264         /* Primary bus, no interrupts here */
 265         if (bus == 0) {
 266                 return -1;
 267         }
 268
 269         /* Lookup first leaf in bus tree */
 270         while ((tmp_bus->parent != NULL) && (tmp_bus->parent->parent != NULL)) {
 271                 tmp_bus = tmp_bus->parent;
 272         }
 273
 274         /* Select between known bridges */
 275         switch (tmp_bus->self->devfn | (tmp_bus->self->bus->number << 8)) {
 276         /* Device is located after first MB bridge */
 277         case 0x0008:
 278                 if (tmp_bus == dev->bus) {
 279                         /* Device is located directy after first MB bridge */
 280                         switch (devpin) {
 281                         case DEVPIN(1, 1):      /* Onboard 82546 ch 0 */
 282                                 if (machine_is_ixdp2401())
 283                                         return IRQ_IXDP2401_INTA_82546;
 284                                 return -1;
 285                         case DEVPIN(1, 2):      /* Onboard 82546 ch 1 */
 286                                 if (machine_is_ixdp2401())
 287                                         return IRQ_IXDP2401_INTB_82546;
 288                                 return -1;
 289                         case DEVPIN(0, 1):      /* PMC INTA# */
 290                                 return IRQ_IXDP2X01_SPCI_PMC_INTA;
 291                         case DEVPIN(0, 2):      /* PMC INTB# */
 292                                 return IRQ_IXDP2X01_SPCI_PMC_INTB;
 293                         case DEVPIN(0, 3):      /* PMC INTC# */
 294                                 return IRQ_IXDP2X01_SPCI_PMC_INTC;
 295                         case DEVPIN(0, 4):      /* PMC INTD# */
 296                                 return IRQ_IXDP2X01_SPCI_PMC_INTD;
 297                         }
 298                 }
 299                 break;
 300         case 0x0010:
 301                 if (tmp_bus == dev->bus) {
 302                         /* Device is located directy after second MB bridge */
 303                         /* Secondary bus of second bridge */
 304                         switch (devpin) {
 305                         case DEVPIN(0, 1):      /* DB#0 */
 306                                 return IRQ_IXDP2X01_SPCI_DB_0;
 307                         case DEVPIN(1, 1):      /* DB#1 */
 308                                 return IRQ_IXDP2X01_SPCI_DB_1;
 309                         }
 310                 } else {
 311                         /* Device is located indirectly after second MB bridge */
 312                         /* Not supported now */
 313                 }
 314                 break;
 315         }
 316
 317         return -1;
 318 }
 319
 320
 321 static int ixdp2x01_pci_setup(int nr, struct pci_sys_data *sys)
 322 {
 323         sys->mem_offset = 0xe0000000;
 324
 325         if (machine_is_ixdp2801() || machine_is_ixdp28x5())
 326                 sys->mem_offset -= ((*IXP2000_PCI_ADDR_EXT & 0xE000) << 16);
 327
 328         return ixp2000_pci_setup(nr, sys);
 329 }
 330
 331 struct hw_pci ixdp2x01_pci __initdata = {
 332         .nr_controllers = 1,
 333         .setup          = ixdp2x01_pci_setup,
 334         .preinit        = ixdp2x01_pci_preinit,
 335         .scan           = ixp2000_pci_scan_bus,
 336         .map_irq        = ixdp2x01_pci_map_irq,
 337 };
 338
 339 int __init ixdp2x01_pci_init(void)
 340 {
 341         if (machine_is_ixdp2401() || machine_is_ixdp2801() ||\
 342                 machine_is_ixdp28x5())
 343                 pci_common_init(&ixdp2x01_pci);
 344
 345         return 0;
 346 }
 347
 348 subsys_initcall(ixdp2x01_pci_init);
 349
 350 /*************************************************************************
 351  * IXDP2x01 Machine Intialization
 352  *************************************************************************/
 353 static struct flash_platform_data ixdp2x01_flash_platform_data = {
 354         .map_name       = "cfi_probe",
 355         .width          = 1,
 356 };
 357
 358 static unsigned long ixdp2x01_flash_bank_setup(unsigned long ofs)
 359 {
 360         ixp2000_reg_wrb(IXDP2X01_CPLD_FLASH_REG,
 361                 ((ofs >> IXDP2X01_FLASH_WINDOW_BITS) | IXDP2X01_CPLD_FLASH_INTERN));
 362         return (ofs & IXDP2X01_FLASH_WINDOW_MASK);
 363 }
 364
 365 static struct ixp2000_flash_data ixdp2x01_flash_data = {
 366         .platform_data  = &ixdp2x01_flash_platform_data,
 367         .bank_setup     = ixdp2x01_flash_bank_setup
 368 };
 369
 370 static struct resource ixdp2x01_flash_resource = {
 371         .start          = 0xc4000000,
 372         .end            = 0xc4000000 + 0x01ffffff,
 373         .flags          = IORESOURCE_MEM,
 374 };
 375
 376 static struct platform_device ixdp2x01_flash = {
 377         .name           = "IXP2000-Flash",
 378         .id             = 0,
 379         .dev            = {
 380                 .platform_data = &ixdp2x01_flash_data,
 381         },
 382         .num_resources  = 1,
 383         .resource       = &ixdp2x01_flash_resource,
 384 };
 385
 386 static struct ixp2000_i2c_pins ixdp2x01_i2c_gpio_pins = {
 387         .sda_pin        = IXDP2X01_GPIO_SDA,
 388         .scl_pin        = IXDP2X01_GPIO_SCL,
 389 };
 390
 391 static struct platform_device ixdp2x01_i2c_controller = {
 392         .name           = "IXP2000-I2C",
 393         .id             = 0,
 394         .dev            = {
 395                 .platform_data = &ixdp2x01_i2c_gpio_pins,
 396         },
 397         .num_resources  = 0
 398 };
 399
 400 static struct platform_device *ixdp2x01_devices[] __initdata = {
 401         &ixdp2x01_flash,
 402         &ixdp2x01_i2c_controller
 403 };
 404
 405 static void __init ixdp2x01_init_machine(void)
 406 {
 407         ixp2000_reg_wrb(IXDP2X01_CPLD_FLASH_REG,
 408                 (IXDP2X01_CPLD_FLASH_BANK_MASK | IXDP2X01_CPLD_FLASH_INTERN));
 409
 410         ixdp2x01_flash_data.nr_banks =
 411                 ((*IXDP2X01_CPLD_FLASH_REG & IXDP2X01_CPLD_FLASH_BANK_MASK) + 1);
 412
 413         platform_add_devices(ixdp2x01_devices, ARRAY_SIZE(ixdp2x01_devices));
 414         ixp2000_uart_init();
 415         ixdp2x01_uart_init();
 416 }
 417
 418
 419 #ifdef CONFIG_ARCH_IXDP2401
 420 MACHINE_START(IXDP2401, "Intel IXDP2401 Development Platform")
 421         /* Maintainer: MontaVista Software, Inc. */
 422         .phys_io        = IXP2000_UART_PHYS_BASE,
 423         .io_pg_offst    = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
 424         .boot_params    = 0x00000100,
 425         .map_io         = ixdp2x01_map_io,
 426         .init_irq       = ixdp2x01_init_irq,
 427         .timer          = &ixdp2x01_timer,
 428         .init_machine   = ixdp2x01_init_machine,
 429 MACHINE_END
 430 #endif
 431
 432 #ifdef CONFIG_ARCH_IXDP2801
 433 MACHINE_START(IXDP2801, "Intel IXDP2801 Development Platform")
 434         /* Maintainer: MontaVista Software, Inc. */
 435         .phys_io        = IXP2000_UART_PHYS_BASE,
 436         .io_pg_offst    = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
 437         .boot_params    = 0x00000100,
 438         .map_io         = ixdp2x01_map_io,
 439         .init_irq       = ixdp2x01_init_irq,
 440         .timer          = &ixdp2x01_timer,
 441         .init_machine   = ixdp2x01_init_machine,
 442 MACHINE_END
 443
 444 /*
 445  * IXDP28x5 is basically an IXDP2801 with a different CPU but Intel
 446  * changed the machine ID in the bootloader
 447  */
 448 MACHINE_START(IXDP28X5, "Intel IXDP2805/2855 Development Platform")
 449         /* Maintainer: MontaVista Software, Inc. */
 450         .phys_io        = IXP2000_UART_PHYS_BASE,
 451         .io_pg_offst    = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
 452         .boot_params    = 0x00000100,
 453         .map_io         = ixdp2x01_map_io,
 454         .init_irq       = ixdp2x01_init_irq,
 455         .timer          = &ixdp2x01_timer,
 456         .init_machine   = ixdp2x01_init_machine,
 457 MACHINE_END
 458 #endif
 459
 460