Merge commit 'v2.6.30-rc5' into next
[deliverable/linux.git] / arch / arm / mach-mx2 / pcm970-baseboard.c
1 /*
2 * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
3 *
4 * This program is free software; you can redistribute it and/or
5 * modify it under the terms of the GNU General Public License
6 * as published by the Free Software Foundation; either version 2
7 * of the License, or (at your option) any later version.
8 * This program is distributed in the hope that it will be useful,
9 * but WITHOUT ANY WARRANTY; without even the implied warranty of
10 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
11 * GNU General Public License for more details.
12 *
13 * You should have received a copy of the GNU General Public License
14 * along with this program; if not, write to the Free Software
15 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
16 * MA 02110-1301, USA.
17 */
18
19 #include <linux/platform_device.h>
20 #include <linux/gpio.h>
21 #include <linux/irq.h>
22
23 #include <asm/mach/arch.h>
24
25 #include <mach/hardware.h>
26 #include <mach/common.h>
27 #include <mach/mmc.h>
28 #include <mach/imxfb.h>
29 #include <mach/iomux.h>
30
31 #include "devices.h"
32
33 static int pcm970_sdhc2_get_ro(struct device *dev)
34 {
35 return gpio_get_value(GPIO_PORTC + 28);
36 }
37
38 static int pcm970_sdhc2_pins[] = {
39 PB4_PF_SD2_D0,
40 PB5_PF_SD2_D1,
41 PB6_PF_SD2_D2,
42 PB7_PF_SD2_D3,
43 PB8_PF_SD2_CMD,
44 PB9_PF_SD2_CLK,
45 };
46
47 static int pcm970_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void *data)
48 {
49 int ret;
50
51 ret = mxc_gpio_setup_multiple_pins(pcm970_sdhc2_pins,
52 ARRAY_SIZE(pcm970_sdhc2_pins), "sdhc2");
53 if(ret)
54 return ret;
55
56 ret = request_irq(IRQ_GPIOC(29), detect_irq, 0,
57 "imx-mmc-detect", data);
58 if (ret)
59 goto out_release_gpio;
60
61 set_irq_type(IRQ_GPIOC(29), IRQF_TRIGGER_FALLING);
62
63 ret = gpio_request(GPIO_PORTC + 28, "imx-mmc-ro");
64 if (ret)
65 goto out_release_gpio;
66
67 mxc_gpio_mode((GPIO_PORTC | 28) | GPIO_GPIO | GPIO_IN);
68 gpio_direction_input(GPIO_PORTC + 28);
69
70 return 0;
71
72 out_release_gpio:
73 mxc_gpio_release_multiple_pins(pcm970_sdhc2_pins,
74 ARRAY_SIZE(pcm970_sdhc2_pins));
75 return ret;
76 }
77
78 static void pcm970_sdhc2_exit(struct device *dev, void *data)
79 {
80 free_irq(IRQ_GPIOC(29), data);
81 gpio_free(GPIO_PORTC + 28);
82 mxc_gpio_release_multiple_pins(pcm970_sdhc2_pins,
83 ARRAY_SIZE(pcm970_sdhc2_pins));
84 }
85
86 static struct imxmmc_platform_data sdhc_pdata = {
87 .get_ro = pcm970_sdhc2_get_ro,
88 .init = pcm970_sdhc2_init,
89 .exit = pcm970_sdhc2_exit,
90 };
91
92 static int mxc_fb_pins[] = {
93 PA5_PF_LSCLK, PA6_PF_LD0, PA7_PF_LD1, PA8_PF_LD2,
94 PA9_PF_LD3, PA10_PF_LD4, PA11_PF_LD5, PA12_PF_LD6,
95 PA13_PF_LD7, PA14_PF_LD8, PA15_PF_LD9, PA16_PF_LD10,
96 PA17_PF_LD11, PA18_PF_LD12, PA19_PF_LD13, PA20_PF_LD14,
97 PA21_PF_LD15, PA22_PF_LD16, PA23_PF_LD17, PA24_PF_REV,
98 PA25_PF_CLS, PA26_PF_PS, PA27_PF_SPL_SPR, PA28_PF_HSYNC,
99 PA29_PF_VSYNC, PA30_PF_CONTRAST, PA31_PF_OE_ACD
100 };
101
102 static int pcm038_fb_init(struct platform_device *pdev)
103 {
104 return mxc_gpio_setup_multiple_pins(mxc_fb_pins,
105 ARRAY_SIZE(mxc_fb_pins), "FB");
106 }
107
108 static int pcm038_fb_exit(struct platform_device *pdev)
109 {
110 mxc_gpio_release_multiple_pins(mxc_fb_pins, ARRAY_SIZE(mxc_fb_pins));
111
112 return 0;
113 }
114
115 /*
116 * Connected is a portrait Sharp-QVGA display
117 * of type: LQ035Q7DH06
118 */
119 static struct imx_fb_platform_data pcm038_fb_data = {
120 .pixclock = 188679, /* in ps (5.3MHz) */
121 .xres = 240,
122 .yres = 320,
123
124 .bpp = 16,
125 .hsync_len = 7,
126 .left_margin = 5,
127 .right_margin = 16,
128
129 .vsync_len = 1,
130 .upper_margin = 7,
131 .lower_margin = 9,
132 .fixed_screen_cpu = 0,
133
134 /*
135 * - HSYNC active high
136 * - VSYNC active high
137 * - clk notenabled while idle
138 * - clock not inverted
139 * - data not inverted
140 * - data enable low active
141 * - enable sharp mode
142 */
143 .pcr = 0xFA0080C0,
144 .pwmr = 0x00A903FF,
145 .lscr1 = 0x00120300,
146 .dmacr = 0x00020010,
147
148 .init = pcm038_fb_init,
149 .exit = pcm038_fb_exit,
150 };
151
152 /*
153 * system init for baseboard usage. Will be called by pcm038 init.
154 *
155 * Add platform devices present on this baseboard and init
156 * them from CPU side as far as required to use them later on
157 */
158 void __init pcm970_baseboard_init(void)
159 {
160 mxc_register_device(&mxc_fb_device, &pcm038_fb_data);
161 mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
162 }
This page took 0.042878 seconds and 6 git commands to generate.