Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6
[deliverable/linux.git] / arch / arm / mach-mx3 / pcm037.c
1 /*
2 * Copyright (C) 2008 Sascha Hauer, Pengutronix
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License as published by
6 * the Free Software Foundation; either version 2 of the License, or
7 * (at your option) any later version.
8 *
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
13 *
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software
16 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
17 */
18
19 #include <linux/types.h>
20 #include <linux/init.h>
21
22 #include <linux/platform_device.h>
23 #include <linux/mtd/physmap.h>
24 #include <linux/mtd/plat-ram.h>
25 #include <linux/memory.h>
26 #include <linux/gpio.h>
27 #include <linux/smsc911x.h>
28 #include <linux/interrupt.h>
29 #include <linux/i2c.h>
30 #include <linux/i2c/at24.h>
31
32 #include <mach/hardware.h>
33 #include <asm/mach-types.h>
34 #include <asm/mach/arch.h>
35 #include <asm/mach/time.h>
36 #include <asm/mach/map.h>
37 #include <mach/common.h>
38 #include <mach/imx-uart.h>
39 #include <mach/iomux-mx3.h>
40 #include <mach/board-pcm037.h>
41 #include <mach/mxc_nand.h>
42 #include <mach/mmc.h>
43 #ifdef CONFIG_I2C_IMX
44 #include <mach/i2c.h>
45 #endif
46
47 #include "devices.h"
48
49 static struct physmap_flash_data pcm037_flash_data = {
50 .width = 2,
51 };
52
53 static struct resource pcm037_flash_resource = {
54 .start = 0xa0000000,
55 .end = 0xa1ffffff,
56 .flags = IORESOURCE_MEM,
57 };
58
59 static struct platform_device pcm037_flash = {
60 .name = "physmap-flash",
61 .id = 0,
62 .dev = {
63 .platform_data = &pcm037_flash_data,
64 },
65 .resource = &pcm037_flash_resource,
66 .num_resources = 1,
67 };
68
69 static struct imxuart_platform_data uart_pdata = {
70 .flags = IMXUART_HAVE_RTSCTS,
71 };
72
73 static struct resource smsc911x_resources[] = {
74 [0] = {
75 .start = CS1_BASE_ADDR + 0x300,
76 .end = CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
77 .flags = IORESOURCE_MEM,
78 },
79 [1] = {
80 .start = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
81 .end = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
82 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
83 },
84 };
85
86 static struct smsc911x_platform_config smsc911x_info = {
87 .flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY |
88 SMSC911X_SAVE_MAC_ADDRESS,
89 .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
90 .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
91 .phy_interface = PHY_INTERFACE_MODE_MII,
92 };
93
94 static struct platform_device pcm037_eth = {
95 .name = "smsc911x",
96 .id = -1,
97 .num_resources = ARRAY_SIZE(smsc911x_resources),
98 .resource = smsc911x_resources,
99 .dev = {
100 .platform_data = &smsc911x_info,
101 },
102 };
103
104 static struct platdata_mtd_ram pcm038_sram_data = {
105 .bankwidth = 2,
106 };
107
108 static struct resource pcm038_sram_resource = {
109 .start = CS4_BASE_ADDR,
110 .end = CS4_BASE_ADDR + 512 * 1024 - 1,
111 .flags = IORESOURCE_MEM,
112 };
113
114 static struct platform_device pcm037_sram_device = {
115 .name = "mtd-ram",
116 .id = 0,
117 .dev = {
118 .platform_data = &pcm038_sram_data,
119 },
120 .num_resources = 1,
121 .resource = &pcm038_sram_resource,
122 };
123
124 static struct mxc_nand_platform_data pcm037_nand_board_info = {
125 .width = 1,
126 .hw_ecc = 1,
127 };
128
129 #ifdef CONFIG_I2C_IMX
130 static int i2c_1_pins[] = {
131 MX31_PIN_CSPI2_MOSI__SCL,
132 MX31_PIN_CSPI2_MISO__SDA,
133 };
134
135 static int pcm037_i2c_1_init(struct device *dev)
136 {
137 return mxc_iomux_setup_multiple_pins(i2c_1_pins, ARRAY_SIZE(i2c_1_pins),
138 "i2c-1");
139 }
140
141 static void pcm037_i2c_1_exit(struct device *dev)
142 {
143 mxc_iomux_release_multiple_pins(i2c_1_pins, ARRAY_SIZE(i2c_1_pins));
144 }
145
146 static struct imxi2c_platform_data pcm037_i2c_1_data = {
147 .bitrate = 100000,
148 .init = pcm037_i2c_1_init,
149 .exit = pcm037_i2c_1_exit,
150 };
151
152 static struct at24_platform_data board_eeprom = {
153 .byte_len = 4096,
154 .page_size = 32,
155 .flags = AT24_FLAG_ADDR16,
156 };
157
158 static struct i2c_board_info pcm037_i2c_devices[] = {
159 {
160 I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
161 .platform_data = &board_eeprom,
162 }, {
163 I2C_BOARD_INFO("rtc-pcf8563", 0x51),
164 .type = "pcf8563",
165 }
166 };
167 #endif
168
169 static int sdhc1_pins[] = {
170 MX31_PIN_SD1_DATA3__SD1_DATA3,
171 MX31_PIN_SD1_DATA2__SD1_DATA2,
172 MX31_PIN_SD1_DATA1__SD1_DATA1,
173 MX31_PIN_SD1_DATA0__SD1_DATA0,
174 MX31_PIN_SD1_CLK__SD1_CLK,
175 MX31_PIN_SD1_CMD__SD1_CMD,
176 };
177
178 static int pcm970_sdhc1_init(struct device *dev, irq_handler_t h, void *data)
179 {
180 return mxc_iomux_setup_multiple_pins(sdhc1_pins, ARRAY_SIZE(sdhc1_pins),
181 "sdhc-1");
182 }
183
184 static void pcm970_sdhc1_exit(struct device *dev, void *data)
185 {
186 mxc_iomux_release_multiple_pins(sdhc1_pins, ARRAY_SIZE(sdhc1_pins));
187 }
188
189 /* No card and rw detection at the moment */
190 static struct imxmmc_platform_data sdhc_pdata = {
191 .init = pcm970_sdhc1_init,
192 .exit = pcm970_sdhc1_exit,
193 };
194
195 static struct platform_device *devices[] __initdata = {
196 &pcm037_flash,
197 &pcm037_eth,
198 &pcm037_sram_device,
199 };
200
201 static int uart0_pins[] = {
202 MX31_PIN_CTS1__CTS1,
203 MX31_PIN_RTS1__RTS1,
204 MX31_PIN_TXD1__TXD1,
205 MX31_PIN_RXD1__RXD1
206 };
207
208 static int uart2_pins[] = {
209 MX31_PIN_CSPI3_MOSI__RXD3,
210 MX31_PIN_CSPI3_MISO__TXD3
211 };
212
213 /*
214 * Board specific initialization.
215 */
216 static void __init mxc_board_init(void)
217 {
218 platform_add_devices(devices, ARRAY_SIZE(devices));
219
220 mxc_iomux_setup_multiple_pins(uart0_pins, ARRAY_SIZE(uart0_pins), "uart-0");
221 mxc_register_device(&mxc_uart_device0, &uart_pdata);
222
223 mxc_iomux_setup_multiple_pins(uart2_pins, ARRAY_SIZE(uart2_pins), "uart-2");
224 mxc_register_device(&mxc_uart_device2, &uart_pdata);
225
226 mxc_iomux_setup_pin(MX31_PIN_BATT_LINE__OWIRE, "batt-0wire");
227 mxc_register_device(&mxc_w1_master_device, NULL);
228
229 /* LAN9217 IRQ pin */
230 if (!mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
231 "pcm037-eth"))
232 gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
233
234 #ifdef CONFIG_I2C_IMX
235 i2c_register_board_info(1, pcm037_i2c_devices,
236 ARRAY_SIZE(pcm037_i2c_devices));
237
238 mxc_register_device(&mxc_i2c_device1, &pcm037_i2c_1_data);
239 #endif
240 mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
241 mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
242 }
243
244 static void __init pcm037_timer_init(void)
245 {
246 mx31_clocks_init(26000000);
247 }
248
249 struct sys_timer pcm037_timer = {
250 .init = pcm037_timer_init,
251 };
252
253 MACHINE_START(PCM037, "Phytec Phycore pcm037")
254 /* Maintainer: Pengutronix */
255 .phys_io = AIPS1_BASE_ADDR,
256 .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
257 .boot_params = PHYS_OFFSET + 0x100,
258 .map_io = mxc_map_io,
259 .init_irq = mxc_init_irq,
260 .init_machine = mxc_board_init,
261 .timer = &pcm037_timer,
262 MACHINE_END
263
This page took 0.03919 seconds and 6 git commands to generate.