ARM: S5P6450: Add missing virtual ASoC DMA device

[deliverable/linux.git] / arch / arm / mach-omap1 / clock.c

/*
 *  linux/arch/arm/mach-omap1/clock.c
 *
 *  Copyright (C) 2004 - 2005, 2009-2010 Nokia Corporation
 *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
 *
 *  Modified to use omap shared clock framework by
 *  Tony Lindgren <tony@atomide.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/clkdev.h>

#include <asm/mach-types.h>

#include <plat/cpu.h>
#include <plat/usb.h>
#include <plat/clock.h>
#include <plat/sram.h>
#include <plat/clkdev_omap.h>

#include "clock.h"
#include "opp.h"

__u32 arm_idlect1_mask;
struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;

/*
 * Omap1 specific clock functions
 */

unsigned long omap1_uart_recalc(struct clk *clk)
{
        unsigned int val = __raw_readl(clk->enable_reg);
        return val & clk->enable_bit ? 48000000 : 12000000;
}

unsigned long omap1_sossi_recalc(struct clk *clk)
{
        u32 div = omap_readl(MOD_CONF_CTRL_1);

        div = (div >> 17) & 0x7;
        div++;

        return clk->parent->rate / div;
}

static void omap1_clk_allow_idle(struct clk *clk)
{
        struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk;

        if (!(clk->flags & CLOCK_IDLE_CONTROL))
                return;

        if (iclk->no_idle_count > 0 && !(--iclk->no_idle_count))
                arm_idlect1_mask |= 1 << iclk->idlect_shift;
}

static void omap1_clk_deny_idle(struct clk *clk)
{
        struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk;

        if (!(clk->flags & CLOCK_IDLE_CONTROL))
                return;

        if (iclk->no_idle_count++ == 0)
                arm_idlect1_mask &= ~(1 << iclk->idlect_shift);
}

static __u16 verify_ckctl_value(__u16 newval)
{
        /* This function checks for following limitations set
         * by the hardware (all conditions must be true):
         * DSPMMU_CK == DSP_CK  or  DSPMMU_CK == DSP_CK/2
         * ARM_CK >= TC_CK
         * DSP_CK >= TC_CK
         * DSPMMU_CK >= TC_CK
         *
         * In addition following rules are enforced:
         * LCD_CK <= TC_CK
         * ARMPER_CK <= TC_CK
         *
         * However, maximum frequencies are not checked for!
         */
        __u8 per_exp;
        __u8 lcd_exp;
        __u8 arm_exp;
        __u8 dsp_exp;
        __u8 tc_exp;
        __u8 dspmmu_exp;

        per_exp = (newval >> CKCTL_PERDIV_OFFSET) & 3;
        lcd_exp = (newval >> CKCTL_LCDDIV_OFFSET) & 3;
        arm_exp = (newval >> CKCTL_ARMDIV_OFFSET) & 3;
        dsp_exp = (newval >> CKCTL_DSPDIV_OFFSET) & 3;
        tc_exp = (newval >> CKCTL_TCDIV_OFFSET) & 3;
        dspmmu_exp = (newval >> CKCTL_DSPMMUDIV_OFFSET) & 3;

        if (dspmmu_exp < dsp_exp)
                dspmmu_exp = dsp_exp;
        if (dspmmu_exp > dsp_exp+1)
                dspmmu_exp = dsp_exp+1;
        if (tc_exp < arm_exp)
                tc_exp = arm_exp;
        if (tc_exp < dspmmu_exp)
                tc_exp = dspmmu_exp;
        if (tc_exp > lcd_exp)
                lcd_exp = tc_exp;
        if (tc_exp > per_exp)
                per_exp = tc_exp;

        newval &= 0xf000;
        newval |= per_exp << CKCTL_PERDIV_OFFSET;
        newval |= lcd_exp << CKCTL_LCDDIV_OFFSET;
        newval |= arm_exp << CKCTL_ARMDIV_OFFSET;
        newval |= dsp_exp << CKCTL_DSPDIV_OFFSET;
        newval |= tc_exp << CKCTL_TCDIV_OFFSET;
        newval |= dspmmu_exp << CKCTL_DSPMMUDIV_OFFSET;

        return newval;
}

static int calc_dsor_exp(struct clk *clk, unsigned long rate)
{
        /* Note: If target frequency is too low, this function will return 4,
         * which is invalid value. Caller must check for this value and act
         * accordingly.
         *
         * Note: This function does not check for following limitations set
         * by the hardware (all conditions must be true):
         * DSPMMU_CK == DSP_CK  or  DSPMMU_CK == DSP_CK/2
         * ARM_CK >= TC_CK
         * DSP_CK >= TC_CK
         * DSPMMU_CK >= TC_CK
         */
        unsigned long realrate;
        struct clk * parent;
        unsigned  dsor_exp;

        parent = clk->parent;
        if (unlikely(parent == NULL))
                return -EIO;

        realrate = parent->rate;
        for (dsor_exp=0; dsor_exp<4; dsor_exp++) {
                if (realrate <= rate)
                        break;

                realrate /= 2;
        }

        return dsor_exp;
}

unsigned long omap1_ckctl_recalc(struct clk *clk)
{
        /* Calculate divisor encoded as 2-bit exponent */
        int dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset));

        return clk->parent->rate / dsor;
}

unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk)
{
        int dsor;

        /* Calculate divisor encoded as 2-bit exponent
         *
         * The clock control bits are in DSP domain,
         * so api_ck is needed for access.
         * Note that DSP_CKCTL virt addr = phys addr, so
         * we must use __raw_readw() instead of omap_readw().
         */
        omap1_clk_enable(api_ck_p);
        dsor = 1 << (3 & (__raw_readw(DSP_CKCTL) >> clk->rate_offset));
        omap1_clk_disable(api_ck_p);

        return clk->parent->rate / dsor;
}

/* MPU virtual clock functions */
int omap1_select_table_rate(struct clk *clk, unsigned long rate)
{
        /* Find the highest supported frequency <= rate and switch to it */
        struct mpu_rate * ptr;
        unsigned long dpll1_rate, ref_rate;

        dpll1_rate = ck_dpll1_p->rate;
        ref_rate = ck_ref_p->rate;

        for (ptr = omap1_rate_table; ptr->rate; ptr++) {
                if (ptr->xtal != ref_rate)
                        continue;

                /* DPLL1 cannot be reprogrammed without risking system crash */
                if (likely(dpll1_rate != 0) && ptr->pll_rate != dpll1_rate)
                        continue;

                /* Can check only after xtal frequency check */
                if (ptr->rate <= rate)
                        break;
        }

        if (!ptr->rate)
                return -EINVAL;

        /*
         * In most cases we should not need to reprogram DPLL.
         * Reprogramming the DPLL is tricky, it must be done from SRAM.
         * (on 730, bit 13 must always be 1)
         */
        if (cpu_is_omap7xx())
                omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val | 0x2000);
        else
                omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val);

        /* XXX Do we need to recalculate the tree below DPLL1 at this point? */
        ck_dpll1_p->rate = ptr->pll_rate;

        return 0;
}

int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate)
{
        int dsor_exp;
        u16 regval;

        dsor_exp = calc_dsor_exp(clk, rate);
        if (dsor_exp > 3)
                dsor_exp = -EINVAL;
        if (dsor_exp < 0)
                return dsor_exp;

        regval = __raw_readw(DSP_CKCTL);
        regval &= ~(3 << clk->rate_offset);
        regval |= dsor_exp << clk->rate_offset;
        __raw_writew(regval, DSP_CKCTL);
        clk->rate = clk->parent->rate / (1 << dsor_exp);

        return 0;
}

long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate)
{
        int dsor_exp = calc_dsor_exp(clk, rate);
        if (dsor_exp < 0)
                return dsor_exp;
        if (dsor_exp > 3)
                dsor_exp = 3;
        return clk->parent->rate / (1 << dsor_exp);
}

int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate)
{
        int dsor_exp;
        u16 regval;

        dsor_exp = calc_dsor_exp(clk, rate);
        if (dsor_exp > 3)
                dsor_exp = -EINVAL;
        if (dsor_exp < 0)
                return dsor_exp;

        regval = omap_readw(ARM_CKCTL);
        regval &= ~(3 << clk->rate_offset);
        regval |= dsor_exp << clk->rate_offset;
        regval = verify_ckctl_value(regval);
        omap_writew(regval, ARM_CKCTL);
        clk->rate = clk->parent->rate / (1 << dsor_exp);
        return 0;
}

long omap1_round_to_table_rate(struct clk *clk, unsigned long rate)
{
        /* Find the highest supported frequency <= rate */
        struct mpu_rate * ptr;
        long highest_rate;
        unsigned long ref_rate;

        ref_rate = ck_ref_p->rate;

        highest_rate = -EINVAL;

        for (ptr = omap1_rate_table; ptr->rate; ptr++) {
                if (ptr->xtal != ref_rate)
                        continue;

                highest_rate = ptr->rate;

                /* Can check only after xtal frequency check */
                if (ptr->rate <= rate)
                        break;
        }

        return highest_rate;
}

static unsigned calc_ext_dsor(unsigned long rate)
{
        unsigned dsor;

        /* MCLK and BCLK divisor selection is not linear:
         * freq = 96MHz / dsor
         *
         * RATIO_SEL range: dsor <-> RATIO_SEL
         * 0..6: (RATIO_SEL+2) <-> (dsor-2)
         * 6..48:  (8+(RATIO_SEL-6)*2) <-> ((dsor-8)/2+6)
         * Minimum dsor is 2 and maximum is 96. Odd divisors starting from 9
         * can not be used.
         */
        for (dsor = 2; dsor < 96; ++dsor) {
                if ((dsor & 1) && dsor > 8)
                        continue;
                if (rate >= 96000000 / dsor)
                        break;
        }
        return dsor;
}

/* XXX Only needed on 1510 */
int omap1_set_uart_rate(struct clk *clk, unsigned long rate)
{
        unsigned int val;

        val = __raw_readl(clk->enable_reg);
        if (rate == 12000000)
                val &= ~(1 << clk->enable_bit);
        else if (rate == 48000000)
                val |= (1 << clk->enable_bit);
        else
                return -EINVAL;
        __raw_writel(val, clk->enable_reg);
        clk->rate = rate;

        return 0;
}

/* External clock (MCLK & BCLK) functions */
int omap1_set_ext_clk_rate(struct clk *clk, unsigned long rate)
{
        unsigned dsor;
        __u16 ratio_bits;

        dsor = calc_ext_dsor(rate);
        clk->rate = 96000000 / dsor;
        if (dsor > 8)
                ratio_bits = ((dsor - 8) / 2 + 6) << 2;
        else
                ratio_bits = (dsor - 2) << 2;

        ratio_bits |= __raw_readw(clk->enable_reg) & ~0xfd;
        __raw_writew(ratio_bits, clk->enable_reg);

        return 0;
}

int omap1_set_sossi_rate(struct clk *clk, unsigned long rate)
{
        u32 l;
        int div;
        unsigned long p_rate;

        p_rate = clk->parent->rate;
        /* Round towards slower frequency */
        div = (p_rate + rate - 1) / rate;
        div--;
        if (div < 0 || div > 7)
                return -EINVAL;

        l = omap_readl(MOD_CONF_CTRL_1);
        l &= ~(7 << 17);
        l |= div << 17;
        omap_writel(l, MOD_CONF_CTRL_1);

        clk->rate = p_rate / (div + 1);

        return 0;
}

long omap1_round_ext_clk_rate(struct clk *clk, unsigned long rate)
{
        return 96000000 / calc_ext_dsor(rate);
}

void omap1_init_ext_clk(struct clk *clk)
{
        unsigned dsor;
        __u16 ratio_bits;

        /* Determine current rate and ensure clock is based on 96MHz APLL */
        ratio_bits = __raw_readw(clk->enable_reg) & ~1;
        __raw_writew(ratio_bits, clk->enable_reg);

        ratio_bits = (ratio_bits & 0xfc) >> 2;
        if (ratio_bits > 6)
                dsor = (ratio_bits - 6) * 2 + 8;
        else
                dsor = ratio_bits + 2;

        clk-> rate = 96000000 / dsor;
}

int omap1_clk_enable(struct clk *clk)
{
        int ret = 0;

        if (clk->usecount++ == 0) {
                if (clk->parent) {
                        ret = omap1_clk_enable(clk->parent);
                        if (ret)
                                goto err;

                        if (clk->flags & CLOCK_NO_IDLE_PARENT)
                                omap1_clk_deny_idle(clk->parent);
                }

                ret = clk->ops->enable(clk);
                if (ret) {
                        if (clk->parent)
                                omap1_clk_disable(clk->parent);
                        goto err;
                }
        }
        return ret;

err:
        clk->usecount--;
        return ret;
}

void omap1_clk_disable(struct clk *clk)
{
        if (clk->usecount > 0 && !(--clk->usecount)) {
                clk->ops->disable(clk);
                if (likely(clk->parent)) {
                        omap1_clk_disable(clk->parent);
                        if (clk->flags & CLOCK_NO_IDLE_PARENT)
                                omap1_clk_allow_idle(clk->parent);
                }
        }
}

static int omap1_clk_enable_generic(struct clk *clk)
{
        __u16 regval16;
        __u32 regval32;

        if (unlikely(clk->enable_reg == NULL)) {
                printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
                       clk->name);
                return -EINVAL;
        }

        if (clk->flags & ENABLE_REG_32BIT) {
                regval32 = __raw_readl(clk->enable_reg);
                regval32 |= (1 << clk->enable_bit);
                __raw_writel(regval32, clk->enable_reg);
        } else {
                regval16 = __raw_readw(clk->enable_reg);
                regval16 |= (1 << clk->enable_bit);
                __raw_writew(regval16, clk->enable_reg);
        }

        return 0;
}

static void omap1_clk_disable_generic(struct clk *clk)
{
        __u16 regval16;
        __u32 regval32;

        if (clk->enable_reg == NULL)
                return;

        if (clk->flags & ENABLE_REG_32BIT) {
                regval32 = __raw_readl(clk->enable_reg);
                regval32 &= ~(1 << clk->enable_bit);
                __raw_writel(regval32, clk->enable_reg);
        } else {
                regval16 = __raw_readw(clk->enable_reg);
                regval16 &= ~(1 << clk->enable_bit);
                __raw_writew(regval16, clk->enable_reg);
        }
}

const struct clkops clkops_generic = {
        .enable         = omap1_clk_enable_generic,
        .disable        = omap1_clk_disable_generic,
};

static int omap1_clk_enable_dsp_domain(struct clk *clk)
{
        int retval;

        retval = omap1_clk_enable(api_ck_p);
        if (!retval) {
                retval = omap1_clk_enable_generic(clk);
                omap1_clk_disable(api_ck_p);
        }

        return retval;
}

static void omap1_clk_disable_dsp_domain(struct clk *clk)
{
        if (omap1_clk_enable(api_ck_p) == 0) {
                omap1_clk_disable_generic(clk);
                omap1_clk_disable(api_ck_p);
        }
}

const struct clkops clkops_dspck = {
        .enable         = omap1_clk_enable_dsp_domain,
        .disable        = omap1_clk_disable_dsp_domain,
};

/* XXX SYSC register handling does not belong in the clock framework */
static int omap1_clk_enable_uart_functional_16xx(struct clk *clk)
{
        int ret;
        struct uart_clk *uclk;

        ret = omap1_clk_enable_generic(clk);
        if (ret == 0) {
                /* Set smart idle acknowledgement mode */
                uclk = (struct uart_clk *)clk;
                omap_writeb((omap_readb(uclk->sysc_addr) & ~0x10) | 8,
                            uclk->sysc_addr);
        }

        return ret;
}

/* XXX SYSC register handling does not belong in the clock framework */
static void omap1_clk_disable_uart_functional_16xx(struct clk *clk)
{
        struct uart_clk *uclk;

        /* Set force idle acknowledgement mode */
        uclk = (struct uart_clk *)clk;
        omap_writeb((omap_readb(uclk->sysc_addr) & ~0x18), uclk->sysc_addr);

        omap1_clk_disable_generic(clk);
}

/* XXX SYSC register handling does not belong in the clock framework */
const struct clkops clkops_uart_16xx = {
        .enable         = omap1_clk_enable_uart_functional_16xx,
        .disable        = omap1_clk_disable_uart_functional_16xx,
};

long omap1_clk_round_rate(struct clk *clk, unsigned long rate)
{
        if (clk->round_rate != NULL)
                return clk->round_rate(clk, rate);

        return clk->rate;
}

int omap1_clk_set_rate(struct clk *clk, unsigned long rate)
{
        int  ret = -EINVAL;

        if (clk->set_rate)
                ret = clk->set_rate(clk, rate);
        return ret;
}

/*
 * Omap1 clock reset and init functions
 */

#ifdef CONFIG_OMAP_RESET_CLOCKS

void omap1_clk_disable_unused(struct clk *clk)
{
        __u32 regval32;

        /* Clocks in the DSP domain need api_ck. Just assume bootloader
         * has not enabled any DSP clocks */
        if (clk->enable_reg == DSP_IDLECT2) {
                printk(KERN_INFO "Skipping reset check for DSP domain "
                       "clock \"%s\"\n", clk->name);
                return;
        }

        /* Is the clock already disabled? */
        if (clk->flags & ENABLE_REG_32BIT)
                regval32 = __raw_readl(clk->enable_reg);
        else
                regval32 = __raw_readw(clk->enable_reg);

        if ((regval32 & (1 << clk->enable_bit)) == 0)
                return;

        printk(KERN_INFO "Disabling unused clock \"%s\"... ", clk->name);
        clk->ops->disable(clk);
        printk(" done\n");
}

#endif