2 * linux/arch/arm/mach-omap2/board-ldp.c
4 * Copyright (C) 2008 Texas Instruments Inc.
5 * Nishant Kamat <nskamat@ti.com>
7 * Modified from mach-omap2/board-3430sdp.c
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
13 #include <linux/gpio.h>
14 #include <linux/kernel.h>
15 #include <linux/init.h>
16 #include <linux/platform_device.h>
17 #include <linux/delay.h>
18 #include <linux/input.h>
19 #include <linux/input/matrix_keypad.h>
20 #include <linux/gpio_keys.h>
21 #include <linux/workqueue.h>
22 #include <linux/err.h>
23 #include <linux/clk.h>
24 #include <linux/spi/spi.h>
25 #include <linux/regulator/machine.h>
26 #include <linux/i2c/twl.h>
28 #include <linux/smsc911x.h>
29 #include <linux/mmc/host.h>
30 #include <linux/gpio.h>
32 #include <mach/hardware.h>
33 #include <asm/mach-types.h>
34 #include <asm/mach/arch.h>
35 #include <asm/mach/map.h>
37 #include <plat/mcspi.h>
38 #include <plat/board.h>
39 #include <plat/common.h>
40 #include <plat/gpmc.h>
41 #include <mach/board-zoom.h>
43 #include <asm/delay.h>
45 #include <plat/gpmc-smsc911x.h>
47 #include <video/omapdss.h>
48 #include <video/omap-panel-generic-dpi.h>
50 #include "board-flash.h"
54 #include "common-board-devices.h"
56 #define LDP_SMSC911X_CS 1
57 #define LDP_SMSC911X_GPIO 152
58 #define DEBUG_BASE 0x08000000
59 #define LDP_ETHR_START DEBUG_BASE
61 static uint32_t board_keymap
[] = {
77 KEY(4, 4, KEY_VOLUMEUP
),
78 KEY(5, 5, KEY_VOLUMEDOWN
),
82 static struct matrix_keymap_data board_map_data
= {
83 .keymap
= board_keymap
,
84 .keymap_size
= ARRAY_SIZE(board_keymap
),
87 static struct twl4030_keypad_data ldp_kp_twl4030_data
= {
88 .keymap_data
= &board_map_data
,
94 static struct gpio_keys_button ldp_gpio_keys_buttons
[] = {
100 .debounce_interval
= 30,
107 .debounce_interval
= 30,
114 .debounce_interval
= 30,
121 .debounce_interval
= 30,
128 .debounce_interval
= 30,
135 .debounce_interval
= 30,
142 .debounce_interval
= 30,
149 .debounce_interval
= 30,
156 .debounce_interval
= 30,
160 static struct gpio_keys_platform_data ldp_gpio_keys
= {
161 .buttons
= ldp_gpio_keys_buttons
,
162 .nbuttons
= ARRAY_SIZE(ldp_gpio_keys_buttons
),
166 static struct platform_device ldp_gpio_keys_device
= {
170 .platform_data
= &ldp_gpio_keys
,
174 static struct omap_smsc911x_platform_data smsc911x_cfg
= {
175 .cs
= LDP_SMSC911X_CS
,
176 .gpio_irq
= LDP_SMSC911X_GPIO
,
177 .gpio_reset
= -EINVAL
,
178 .flags
= SMSC911X_USE_32BIT
,
181 static inline void __init
ldp_init_smsc911x(void)
183 gpmc_smsc911x_init(&smsc911x_cfg
);
188 static int ldp_backlight_gpio
;
189 static int ldp_lcd_enable_gpio
;
191 #define LCD_PANEL_RESET_GPIO 55
192 #define LCD_PANEL_QVGA_GPIO 56
194 static int ldp_panel_enable_lcd(struct omap_dss_device
*dssdev
)
196 if (gpio_is_valid(ldp_lcd_enable_gpio
))
197 gpio_direction_output(ldp_lcd_enable_gpio
, 1);
198 if (gpio_is_valid(ldp_backlight_gpio
))
199 gpio_direction_output(ldp_backlight_gpio
, 1);
204 static void ldp_panel_disable_lcd(struct omap_dss_device
*dssdev
)
206 if (gpio_is_valid(ldp_lcd_enable_gpio
))
207 gpio_direction_output(ldp_lcd_enable_gpio
, 0);
208 if (gpio_is_valid(ldp_backlight_gpio
))
209 gpio_direction_output(ldp_backlight_gpio
, 0);
212 static struct panel_generic_dpi_data ldp_panel_data
= {
213 .name
= "nec_nl2432dr22-11b",
214 .platform_enable
= ldp_panel_enable_lcd
,
215 .platform_disable
= ldp_panel_disable_lcd
,
218 static struct omap_dss_device ldp_lcd_device
= {
220 .driver_name
= "generic_dpi_panel",
221 .type
= OMAP_DISPLAY_TYPE_DPI
,
222 .phy
.dpi
.data_lines
= 18,
223 .data
= &ldp_panel_data
,
226 static struct omap_dss_device
*ldp_dss_devices
[] = {
230 static struct omap_dss_board_info ldp_dss_data
= {
231 .num_devices
= ARRAY_SIZE(ldp_dss_devices
),
232 .devices
= ldp_dss_devices
,
233 .default_device
= &ldp_lcd_device
,
236 static void __init
ldp_display_init(void)
240 static struct gpio gpios
[] __initdata
= {
241 {LCD_PANEL_RESET_GPIO
, GPIOF_OUT_INIT_HIGH
, "LCD RESET"},
242 {LCD_PANEL_QVGA_GPIO
, GPIOF_OUT_INIT_HIGH
, "LCD QVGA"},
245 r
= gpio_request_array(gpios
, ARRAY_SIZE(gpios
));
247 pr_err("Cannot request LCD GPIOs, error %d\n", r
);
251 omap_display_init(&ldp_dss_data
);
254 static void __init
omap_ldp_init_early(void)
256 omap2_init_common_infrastructure();
257 omap2_init_common_devices(NULL
, NULL
);
260 static int ldp_twl_gpio_setup(struct device
*dev
, unsigned gpio
, unsigned ngpio
)
264 struct gpio gpios
[] = {
265 {gpio
+ 7 , GPIOF_OUT_INIT_LOW
, "LCD ENABLE"},
266 {gpio
+ 15, GPIOF_OUT_INIT_LOW
, "LCD BACKLIGHT"},
269 r
= gpio_request_array(gpios
, ARRAY_SIZE(gpios
));
271 pr_err("Cannot request LCD GPIOs, error %d\n", r
);
272 ldp_backlight_gpio
= -EINVAL
;
273 ldp_lcd_enable_gpio
= -EINVAL
;
277 ldp_backlight_gpio
= gpio
+ 15;
278 ldp_lcd_enable_gpio
= gpio
+ 7;
283 static struct twl4030_gpio_platform_data ldp_gpio_data
= {
284 .gpio_base
= OMAP_MAX_GPIO_LINES
,
285 .irq_base
= TWL4030_GPIO_IRQ_BASE
,
286 .irq_end
= TWL4030_GPIO_IRQ_END
,
287 .setup
= ldp_twl_gpio_setup
,
290 static struct regulator_consumer_supply ldp_vmmc1_supply
[] = {
291 REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
294 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
295 static struct regulator_init_data ldp_vmmc1
= {
299 .valid_modes_mask
= REGULATOR_MODE_NORMAL
300 | REGULATOR_MODE_STANDBY
,
301 .valid_ops_mask
= REGULATOR_CHANGE_VOLTAGE
302 | REGULATOR_CHANGE_MODE
303 | REGULATOR_CHANGE_STATUS
,
305 .num_consumer_supplies
= ARRAY_SIZE(ldp_vmmc1_supply
),
306 .consumer_supplies
= ldp_vmmc1_supply
,
310 static struct regulator_consumer_supply ldp_vaux1_supplies
[] = {
311 REGULATOR_SUPPLY("vcc", "spi1.0"),
315 static struct regulator_init_data ldp_vaux1
= {
320 .valid_modes_mask
= REGULATOR_MODE_NORMAL
321 | REGULATOR_MODE_STANDBY
,
322 .valid_ops_mask
= REGULATOR_CHANGE_MODE
323 | REGULATOR_CHANGE_STATUS
,
325 .num_consumer_supplies
= ARRAY_SIZE(ldp_vaux1_supplies
),
326 .consumer_supplies
= ldp_vaux1_supplies
,
329 static struct regulator_consumer_supply ldp_vpll2_supplies
[] = {
330 REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
331 REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
334 static struct regulator_init_data ldp_vpll2
= {
340 .valid_modes_mask
= REGULATOR_MODE_NORMAL
341 | REGULATOR_MODE_STANDBY
,
342 .valid_ops_mask
= REGULATOR_CHANGE_MODE
343 | REGULATOR_CHANGE_STATUS
,
345 .num_consumer_supplies
= ARRAY_SIZE(ldp_vpll2_supplies
),
346 .consumer_supplies
= ldp_vpll2_supplies
,
349 static struct twl4030_platform_data ldp_twldata
= {
350 /* platform_data for children goes here */
354 .gpio
= &ldp_gpio_data
,
355 .keypad
= &ldp_kp_twl4030_data
,
358 static int __init
omap_i2c_init(void)
360 omap3_pmic_get_config(&ldp_twldata
,
361 TWL_COMMON_PDATA_USB
| TWL_COMMON_PDATA_MADC
, 0);
362 omap3_pmic_init("twl4030", &ldp_twldata
);
363 omap_register_i2c_bus(2, 400, NULL
, 0);
364 omap_register_i2c_bus(3, 400, NULL
, 0);
368 static struct omap2_hsmmc_info mmc
[] __initdata
= {
371 .caps
= MMC_CAP_4_BIT_DATA
,
378 static struct platform_device
*ldp_devices
[] __initdata
= {
379 &ldp_gpio_keys_device
,
382 #ifdef CONFIG_OMAP_MUX
383 static struct omap_board_mux board_mux
[] __initdata
= {
384 { .reg_offset
= OMAP_MUX_TERMINATOR
},
388 static struct mtd_partition ldp_nand_partitions
[] = {
389 /* All the partition sizes are listed in terms of NAND block size */
391 .name
= "X-Loader-NAND",
393 .size
= 4 * (64 * 2048), /* 512KB, 0x80000 */
394 .mask_flags
= MTD_WRITEABLE
, /* force read-only */
397 .name
= "U-Boot-NAND",
398 .offset
= MTDPART_OFS_APPEND
, /* Offset = 0x80000 */
399 .size
= 10 * (64 * 2048), /* 1.25MB, 0x140000 */
400 .mask_flags
= MTD_WRITEABLE
, /* force read-only */
403 .name
= "Boot Env-NAND",
404 .offset
= MTDPART_OFS_APPEND
, /* Offset = 0x1c0000 */
405 .size
= 2 * (64 * 2048), /* 256KB, 0x40000 */
408 .name
= "Kernel-NAND",
409 .offset
= MTDPART_OFS_APPEND
, /* Offset = 0x0200000*/
410 .size
= 240 * (64 * 2048), /* 30M, 0x1E00000 */
413 .name
= "File System - NAND",
414 .offset
= MTDPART_OFS_APPEND
, /* Offset = 0x2000000 */
415 .size
= MTDPART_SIZ_FULL
, /* 96MB, 0x6000000 */
420 static void __init
omap_ldp_init(void)
422 omap3_mux_init(board_mux
, OMAP_PACKAGE_CBB
);
425 platform_add_devices(ldp_devices
, ARRAY_SIZE(ldp_devices
));
426 omap_ads7846_init(1, 54, 310, NULL
);
429 board_nand_init(ldp_nand_partitions
,
430 ARRAY_SIZE(ldp_nand_partitions
), ZOOM_NAND_CS
, 0);
432 omap2_hsmmc_init(mmc
);
436 MACHINE_START(OMAP_LDP
, "OMAP LDP board")
437 .atag_offset
= 0x100,
438 .reserve
= omap_reserve
,
439 .map_io
= omap3_map_io
,
440 .init_early
= omap_ldp_init_early
,
441 .init_irq
= omap3_init_irq
,
442 .init_machine
= omap_ldp_init
,
443 .timer
= &omap3_timer
,