arch/arm/mach-omap2/board-omap3stalker.c

   1 /*
   2  * linux/arch/arm/mach-omap2/board-omap3evm.c
   3  *
   4  * Copyright (C) 2008 Guangzhou EMA-Tech
   5  *
   6  * Modified from mach-omap2/board-omap3evm.c
   7  *
   8  * Initial code: Syed Mohammed Khasim
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License version 2 as
  12  * published by the Free Software Foundation.
  13  */
  14
  15 #include <linux/kernel.h>
  16 #include <linux/init.h>
  17 #include <linux/platform_device.h>
  18 #include <linux/delay.h>
  19 #include <linux/err.h>
  20 #include <linux/clk.h>
  21 #include <linux/io.h>
  22 #include <linux/leds.h>
  23 #include <linux/gpio.h>
  24 #include <linux/input.h>
  25 #include <linux/gpio_keys.h>
  26
  27 #include <linux/regulator/fixed.h>
  28 #include <linux/regulator/machine.h>
  29 #include <linux/i2c/twl.h>
  30 #include <linux/mmc/host.h>
  31 #include <linux/input/matrix_keypad.h>
  32 #include <linux/spi/spi.h>
  33 #include <linux/interrupt.h>
  34 #include <linux/smsc911x.h>
  35 #include <linux/platform_data/at24.h>
  36 #include <linux/usb/phy.h>
  37
  38 #include <asm/mach-types.h>
  39 #include <asm/mach/arch.h>
  40 #include <asm/mach/map.h>
  41 #include <asm/mach/flash.h>
  42
  43 #include "common.h"
  44 #include "gpmc.h"
  45 #include <linux/platform_data/mtd-nand-omap2.h>
  46 #include <video/omapdss.h>
  47 #include <video/omap-panel-data.h>
  48
  49 #include <linux/platform_data/spi-omap2-mcspi.h>
  50
  51 #include "sdram-micron-mt46h32m32lf-6.h"
  52 #include "mux.h"
  53 #include "hsmmc.h"
  54 #include "common-board-devices.h"
  55
  56 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
  57 #include "gpmc-smsc911x.h"
  58
  59 #define OMAP3STALKER_ETHR_START 0x2c000000
  60 #define OMAP3STALKER_ETHR_SIZE  1024
  61 #define OMAP3STALKER_ETHR_GPIO_IRQ      19
  62 #define OMAP3STALKER_SMC911X_CS 5
  63
  64 static struct omap_smsc911x_platform_data smsc911x_cfg = {
  65         .cs             = OMAP3STALKER_SMC911X_CS,
  66         .gpio_irq       = OMAP3STALKER_ETHR_GPIO_IRQ,
  67         .gpio_reset     = -EINVAL,
  68         .flags          = (SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS),
  69 };
  70
  71 static inline void __init omap3stalker_init_eth(void)
  72 {
  73         omap_mux_init_gpio(19, OMAP_PIN_INPUT_PULLUP);
  74         gpmc_smsc911x_init(&smsc911x_cfg);
  75 }
  76
  77 #else
  78 static inline void __init omap3stalker_init_eth(void)
  79 {
  80         return;
  81 }
  82 #endif
  83
  84 /*
  85  * OMAP3 DSS control signals
  86  */
  87
  88 #define DSS_ENABLE_GPIO 199
  89 #define LCD_PANEL_BKLIGHT_GPIO  210
  90 #define ENABLE_VPLL2_DEV_GRP    0xE0
  91
  92 static void __init omap3_stalker_display_init(void)
  93 {
  94         return;
  95 }
  96 static struct connector_dvi_platform_data omap3stalker_dvi_connector_pdata = {
  97         .name                   = "dvi",
  98         .source                 = "tfp410.0",
  99         .i2c_bus_num            = -1,
 100 };
 101
 102 static struct platform_device omap3stalker_dvi_connector_device = {
 103         .name                   = "connector-dvi",
 104         .id                     = 0,
 105         .dev.platform_data      = &omap3stalker_dvi_connector_pdata,
 106 };
 107
 108 static struct encoder_tfp410_platform_data omap3stalker_tfp410_pdata = {
 109         .name                   = "tfp410.0",
 110         .source                 = "dpi.0",
 111         .data_lines             = 24,
 112         .power_down_gpio        = DSS_ENABLE_GPIO,
 113 };
 114
 115 static struct platform_device omap3stalker_tfp410_device = {
 116         .name                   = "tfp410",
 117         .id                     = 0,
 118         .dev.platform_data      = &omap3stalker_tfp410_pdata,
 119 };
 120
 121 static struct connector_atv_platform_data omap3stalker_tv_pdata = {
 122         .name = "tv",
 123         .source = "venc.0",
 124 #if defined(CONFIG_OMAP2_VENC_OUT_TYPE_SVIDEO)
 125         .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
 126 #elif defined(CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE)
 127         .connector_type = OMAP_DSS_VENC_TYPE_COMPOSITE,
 128 #endif
 129         .invert_polarity = false,
 130 };
 131
 132 static struct platform_device omap3stalker_tv_connector_device = {
 133         .name                   = "connector-analog-tv",
 134         .id                     = 0,
 135         .dev.platform_data      = &omap3stalker_tv_pdata,
 136 };
 137
 138 static struct omap_dss_board_info omap3_stalker_dss_data = {
 139         .default_display_name = "dvi",
 140 };
 141
 142 static struct regulator_consumer_supply omap3stalker_vmmc1_supply[] = {
 143         REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
 144 };
 145
 146 static struct regulator_consumer_supply omap3stalker_vsim_supply[] = {
 147         REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
 148 };
 149
 150 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
 151 static struct regulator_init_data omap3stalker_vmmc1 = {
 152         .constraints            = {
 153                 .min_uV                 = 1850000,
 154                 .max_uV                 = 3150000,
 155                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 156                 | REGULATOR_MODE_STANDBY,
 157                 .valid_ops_mask         = REGULATOR_CHANGE_VOLTAGE
 158                 | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
 159         },
 160         .num_consumer_supplies  = ARRAY_SIZE(omap3stalker_vmmc1_supply),
 161         .consumer_supplies      = omap3stalker_vmmc1_supply,
 162 };
 163
 164 /* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
 165 static struct regulator_init_data omap3stalker_vsim = {
 166         .constraints            = {
 167                 .min_uV                 = 1800000,
 168                 .max_uV                 = 3000000,
 169                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 170                 | REGULATOR_MODE_STANDBY,
 171                 .valid_ops_mask         = REGULATOR_CHANGE_VOLTAGE
 172                 | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
 173         },
 174         .num_consumer_supplies  = ARRAY_SIZE(omap3stalker_vsim_supply),
 175         .consumer_supplies      = omap3stalker_vsim_supply,
 176 };
 177
 178 static struct omap2_hsmmc_info mmc[] = {
 179         {
 180                 .mmc            = 1,
 181                 .caps           = MMC_CAP_4_BIT_DATA,
 182                 .gpio_cd        = -EINVAL,
 183                 .gpio_wp        = 23,
 184                 .deferred       = true,
 185          },
 186         {}                      /* Terminator */
 187 };
 188
 189 static struct gpio_keys_button gpio_buttons[] = {
 190         {
 191          .code          = BTN_EXTRA,
 192          .gpio          = 18,
 193          .desc          = "user",
 194          .wakeup        = 1,
 195          },
 196 };
 197
 198 static struct gpio_keys_platform_data gpio_key_info = {
 199         .buttons        = gpio_buttons,
 200         .nbuttons       = ARRAY_SIZE(gpio_buttons),
 201 };
 202
 203 static struct platform_device keys_gpio = {
 204         .name           = "gpio-keys",
 205         .id             = -1,
 206         .dev            = {
 207                 .platform_data  = &gpio_key_info,
 208         },
 209 };
 210
 211 static struct gpio_led gpio_leds[] = {
 212         {
 213          .name                  = "stalker:D8:usr0",
 214          .default_trigger       = "default-on",
 215          .gpio                  = 126,
 216          },
 217         {
 218          .name                  = "stalker:D9:usr1",
 219          .default_trigger       = "default-on",
 220          .gpio                  = 127,
 221          },
 222         {
 223          .name                  = "stalker:D3:mmc0",
 224          .gpio                  = -EINVAL,      /* gets replaced */
 225          .active_low            = true,
 226          .default_trigger       = "mmc0",
 227          },
 228         {
 229          .name                  = "stalker:D4:heartbeat",
 230          .gpio                  = -EINVAL,      /* gets replaced */
 231          .active_low            = true,
 232          .default_trigger       = "heartbeat",
 233          },
 234 };
 235
 236 static struct gpio_led_platform_data gpio_led_info = {
 237         .leds           = gpio_leds,
 238         .num_leds       = ARRAY_SIZE(gpio_leds),
 239 };
 240
 241 static struct platform_device leds_gpio = {
 242         .name   = "leds-gpio",
 243         .id     = -1,
 244         .dev    = {
 245                 .platform_data  = &gpio_led_info,
 246         },
 247 };
 248
 249 static int
 250 omap3stalker_twl_gpio_setup(struct device *dev,
 251                             unsigned gpio, unsigned ngpio)
 252 {
 253         /* gpio + 0 is "mmc0_cd" (input/IRQ) */
 254         mmc[0].gpio_cd = gpio + 0;
 255         omap_hsmmc_late_init(mmc);
 256
 257         /*
 258          * Most GPIOs are for USB OTG.  Some are mostly sent to
 259          * the P2 connector; notably LEDA for the LCD backlight.
 260          */
 261
 262         /* TWL4030_GPIO_MAX + 0 == ledA, LCD Backlight control */
 263         gpio_request_one(gpio + TWL4030_GPIO_MAX, GPIOF_OUT_INIT_LOW,
 264                          "EN_LCD_BKL");
 265
 266         /* gpio + 7 == DVI Enable */
 267         gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI");
 268
 269         /* TWL4030_GPIO_MAX + 1 == ledB (out, mmc0) */
 270         gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
 271         /* GPIO + 13 == ledsync (out, heartbeat) */
 272         gpio_leds[3].gpio = gpio + 13;
 273
 274         platform_device_register(&leds_gpio);
 275         return 0;
 276 }
 277
 278 static struct twl4030_gpio_platform_data omap3stalker_gpio_data = {
 279         .use_leds       = true,
 280         .setup          = omap3stalker_twl_gpio_setup,
 281 };
 282
 283 static uint32_t board_keymap[] = {
 284         KEY(0, 0, KEY_LEFT),
 285         KEY(0, 1, KEY_DOWN),
 286         KEY(0, 2, KEY_ENTER),
 287         KEY(0, 3, KEY_M),
 288
 289         KEY(1, 0, KEY_RIGHT),
 290         KEY(1, 1, KEY_UP),
 291         KEY(1, 2, KEY_I),
 292         KEY(1, 3, KEY_N),
 293
 294         KEY(2, 0, KEY_A),
 295         KEY(2, 1, KEY_E),
 296         KEY(2, 2, KEY_J),
 297         KEY(2, 3, KEY_O),
 298
 299         KEY(3, 0, KEY_B),
 300         KEY(3, 1, KEY_F),
 301         KEY(3, 2, KEY_K),
 302         KEY(3, 3, KEY_P)
 303 };
 304
 305 static struct matrix_keymap_data board_map_data = {
 306         .keymap         = board_keymap,
 307         .keymap_size    = ARRAY_SIZE(board_keymap),
 308 };
 309
 310 static struct twl4030_keypad_data omap3stalker_kp_data = {
 311         .keymap_data    = &board_map_data,
 312         .rows           = 4,
 313         .cols           = 4,
 314         .rep            = 1,
 315 };
 316
 317 static struct twl4030_platform_data omap3stalker_twldata = {
 318         /* platform_data for children goes here */
 319         .keypad         = &omap3stalker_kp_data,
 320         .gpio           = &omap3stalker_gpio_data,
 321         .vmmc1          = &omap3stalker_vmmc1,
 322         .vsim           = &omap3stalker_vsim,
 323 };
 324
 325 static struct at24_platform_data fram_info = {
 326         .byte_len       = (64 * 1024) / 8,
 327         .page_size      = 8192,
 328         .flags          = AT24_FLAG_ADDR16 | AT24_FLAG_IRUGO,
 329 };
 330
 331 static struct i2c_board_info __initdata omap3stalker_i2c_boardinfo3[] = {
 332         {
 333          I2C_BOARD_INFO("24c64", 0x50),
 334          .flags         = I2C_CLIENT_WAKE,
 335          .platform_data = &fram_info,
 336          },
 337 };
 338
 339 static int __init omap3_stalker_i2c_init(void)
 340 {
 341         omap3_pmic_get_config(&omap3stalker_twldata,
 342                         TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC |
 343                         TWL_COMMON_PDATA_AUDIO,
 344                         TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
 345
 346         omap3stalker_twldata.vdac->constraints.apply_uV = true;
 347         omap3stalker_twldata.vpll2->constraints.apply_uV = true;
 348         omap3stalker_twldata.vpll2->constraints.name = "VDVI";
 349
 350         omap3_pmic_init("twl4030", &omap3stalker_twldata);
 351         omap_register_i2c_bus(2, 400, NULL, 0);
 352         omap_register_i2c_bus(3, 400, omap3stalker_i2c_boardinfo3,
 353                               ARRAY_SIZE(omap3stalker_i2c_boardinfo3));
 354         return 0;
 355 }
 356
 357 #define OMAP3_STALKER_TS_GPIO   175
 358
 359 static struct usbhs_phy_data phy_data[] __initdata = {
 360         {
 361                 .port = 2,
 362                 .reset_gpio = 21,
 363                 .vcc_gpio = -EINVAL,
 364         },
 365 };
 366
 367 static struct platform_device *omap3_stalker_devices[] __initdata = {
 368         &keys_gpio,
 369         &omap3stalker_tfp410_device,
 370         &omap3stalker_dvi_connector_device,
 371         &omap3stalker_tv_connector_device,
 372 };
 373
 374 static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
 375         .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
 376 };
 377
 378 #ifdef CONFIG_OMAP_MUX
 379 static struct omap_board_mux board_mux[] __initdata = {
 380         OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP |
 381                   OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE),
 382         OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
 383                   OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE),
 384         {.reg_offset = OMAP_MUX_TERMINATOR},
 385 };
 386 #endif
 387
 388 static struct regulator_consumer_supply dummy_supplies[] = {
 389         REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
 390         REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
 391 };
 392
 393 static void __init omap3_stalker_init(void)
 394 {
 395         regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 396         omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
 397
 398         omap_mux_init_gpio(23, OMAP_PIN_INPUT);
 399         omap_hsmmc_init(mmc);
 400
 401         omap3_stalker_i2c_init();
 402
 403         platform_add_devices(omap3_stalker_devices,
 404                              ARRAY_SIZE(omap3_stalker_devices));
 405
 406         omap_display_init(&omap3_stalker_dss_data);
 407
 408         omap_serial_init();
 409         omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
 410         usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 411         usb_musb_init(NULL);
 412
 413         usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
 414         usbhs_init(&usbhs_bdata);
 415         omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL);
 416
 417         omap_mux_init_gpio(21, OMAP_PIN_OUTPUT);
 418         omap_mux_init_gpio(18, OMAP_PIN_INPUT_PULLUP);
 419
 420         omap3stalker_init_eth();
 421         omap3_stalker_display_init();
 422 /* Ensure SDRC pins are mux'd for self-refresh */
 423         omap_mux_init_signal("sdr_cke0", OMAP_PIN_OUTPUT);
 424         omap_mux_init_signal("sdr_cke1", OMAP_PIN_OUTPUT);
 425 }
 426
 427 MACHINE_START(SBC3530, "OMAP3 STALKER")
 428         /* Maintainer: Jason Lam -lzg@ema-tech.com */
 429         .atag_offset            = 0x100,
 430         .map_io                 = omap3_map_io,
 431         .init_early             = omap35xx_init_early,
 432         .init_irq               = omap3_init_irq,
 433         .handle_irq             = omap3_intc_handle_irq,
 434         .init_machine           = omap3_stalker_init,
 435         .init_late              = omap35xx_init_late,
 436         .init_time              = omap3_secure_sync32k_timer_init,
 437         .restart                = omap3xxx_restart,
 438 MACHINE_END