arm: Fold irq_set_chip/irq_set_handler
[deliverable/linux.git] / arch / arm / mach-omap2 / irq.c
1 /*
2 * linux/arch/arm/mach-omap2/irq.c
3 *
4 * Interrupt handler for OMAP2 boards.
5 *
6 * Copyright (C) 2005 Nokia Corporation
7 * Author: Paul Mundt <paul.mundt@nokia.com>
8 *
9 * This file is subject to the terms and conditions of the GNU General Public
10 * License. See the file "COPYING" in the main directory of this archive
11 * for more details.
12 */
13 #include <linux/kernel.h>
14 #include <linux/init.h>
15 #include <linux/interrupt.h>
16 #include <linux/io.h>
17 #include <mach/hardware.h>
18 #include <asm/mach/irq.h>
19
20
21 /* selected INTC register offsets */
22
23 #define INTC_REVISION 0x0000
24 #define INTC_SYSCONFIG 0x0010
25 #define INTC_SYSSTATUS 0x0014
26 #define INTC_SIR 0x0040
27 #define INTC_CONTROL 0x0048
28 #define INTC_PROTECTION 0x004C
29 #define INTC_IDLE 0x0050
30 #define INTC_THRESHOLD 0x0068
31 #define INTC_MIR0 0x0084
32 #define INTC_MIR_CLEAR0 0x0088
33 #define INTC_MIR_SET0 0x008c
34 #define INTC_PENDING_IRQ0 0x0098
35 /* Number of IRQ state bits in each MIR register */
36 #define IRQ_BITS_PER_REG 32
37
38 /*
39 * OMAP2 has a number of different interrupt controllers, each interrupt
40 * controller is identified as its own "bank". Register definitions are
41 * fairly consistent for each bank, but not all registers are implemented
42 * for each bank.. when in doubt, consult the TRM.
43 */
44 static struct omap_irq_bank {
45 void __iomem *base_reg;
46 unsigned int nr_irqs;
47 } __attribute__ ((aligned(4))) irq_banks[] = {
48 {
49 /* MPU INTC */
50 .nr_irqs = 96,
51 },
52 };
53
54 /* Structure to save interrupt controller context */
55 struct omap3_intc_regs {
56 u32 sysconfig;
57 u32 protection;
58 u32 idle;
59 u32 threshold;
60 u32 ilr[INTCPS_NR_IRQS];
61 u32 mir[INTCPS_NR_MIR_REGS];
62 };
63
64 /* INTC bank register get/set */
65
66 static void intc_bank_write_reg(u32 val, struct omap_irq_bank *bank, u16 reg)
67 {
68 __raw_writel(val, bank->base_reg + reg);
69 }
70
71 static u32 intc_bank_read_reg(struct omap_irq_bank *bank, u16 reg)
72 {
73 return __raw_readl(bank->base_reg + reg);
74 }
75
76 static int previous_irq;
77
78 /*
79 * On 34xx we can get occasional spurious interrupts if the ack from
80 * an interrupt handler does not get posted before we unmask. Warn about
81 * the interrupt handlers that need to flush posted writes.
82 */
83 static int omap_check_spurious(unsigned int irq)
84 {
85 u32 sir, spurious;
86
87 sir = intc_bank_read_reg(&irq_banks[0], INTC_SIR);
88 spurious = sir >> 7;
89
90 if (spurious) {
91 printk(KERN_WARNING "Spurious irq %i: 0x%08x, please flush "
92 "posted write for irq %i\n",
93 irq, sir, previous_irq);
94 return spurious;
95 }
96
97 return 0;
98 }
99
100 /* XXX: FIQ and additional INTC support (only MPU at the moment) */
101 static void omap_ack_irq(struct irq_data *d)
102 {
103 intc_bank_write_reg(0x1, &irq_banks[0], INTC_CONTROL);
104 }
105
106 static void omap_mask_irq(struct irq_data *d)
107 {
108 unsigned int irq = d->irq;
109 int offset = irq & (~(IRQ_BITS_PER_REG - 1));
110
111 if (cpu_is_omap34xx() && !cpu_is_ti816x()) {
112 int spurious = 0;
113
114 /*
115 * INT_34XX_GPT12_IRQ is also the spurious irq. Maybe because
116 * it is the highest irq number?
117 */
118 if (irq == INT_34XX_GPT12_IRQ)
119 spurious = omap_check_spurious(irq);
120
121 if (!spurious)
122 previous_irq = irq;
123 }
124
125 irq &= (IRQ_BITS_PER_REG - 1);
126
127 intc_bank_write_reg(1 << irq, &irq_banks[0], INTC_MIR_SET0 + offset);
128 }
129
130 static void omap_unmask_irq(struct irq_data *d)
131 {
132 unsigned int irq = d->irq;
133 int offset = irq & (~(IRQ_BITS_PER_REG - 1));
134
135 irq &= (IRQ_BITS_PER_REG - 1);
136
137 intc_bank_write_reg(1 << irq, &irq_banks[0], INTC_MIR_CLEAR0 + offset);
138 }
139
140 static void omap_mask_ack_irq(struct irq_data *d)
141 {
142 omap_mask_irq(d);
143 omap_ack_irq(d);
144 }
145
146 static struct irq_chip omap_irq_chip = {
147 .name = "INTC",
148 .irq_ack = omap_mask_ack_irq,
149 .irq_mask = omap_mask_irq,
150 .irq_unmask = omap_unmask_irq,
151 };
152
153 static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)
154 {
155 unsigned long tmp;
156
157 tmp = intc_bank_read_reg(bank, INTC_REVISION) & 0xff;
158 printk(KERN_INFO "IRQ: Found an INTC at 0x%p "
159 "(revision %ld.%ld) with %d interrupts\n",
160 bank->base_reg, tmp >> 4, tmp & 0xf, bank->nr_irqs);
161
162 tmp = intc_bank_read_reg(bank, INTC_SYSCONFIG);
163 tmp |= 1 << 1; /* soft reset */
164 intc_bank_write_reg(tmp, bank, INTC_SYSCONFIG);
165
166 while (!(intc_bank_read_reg(bank, INTC_SYSSTATUS) & 0x1))
167 /* Wait for reset to complete */;
168
169 /* Enable autoidle */
170 intc_bank_write_reg(1 << 0, bank, INTC_SYSCONFIG);
171 }
172
173 int omap_irq_pending(void)
174 {
175 int i;
176
177 for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
178 struct omap_irq_bank *bank = irq_banks + i;
179 int irq;
180
181 for (irq = 0; irq < bank->nr_irqs; irq += 32)
182 if (intc_bank_read_reg(bank, INTC_PENDING_IRQ0 +
183 ((irq >> 5) << 5)))
184 return 1;
185 }
186 return 0;
187 }
188
189 void __init omap_init_irq(void)
190 {
191 unsigned long nr_of_irqs = 0;
192 unsigned int nr_banks = 0;
193 int i;
194
195 for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
196 unsigned long base = 0;
197 struct omap_irq_bank *bank = irq_banks + i;
198
199 if (cpu_is_omap24xx())
200 base = OMAP24XX_IC_BASE;
201 else if (cpu_is_omap34xx())
202 base = OMAP34XX_IC_BASE;
203
204 BUG_ON(!base);
205
206 if (cpu_is_ti816x())
207 bank->nr_irqs = 128;
208
209 /* Static mapping, never released */
210 bank->base_reg = ioremap(base, SZ_4K);
211 if (!bank->base_reg) {
212 printk(KERN_ERR "Could not ioremap irq bank%i\n", i);
213 continue;
214 }
215
216 omap_irq_bank_init_one(bank);
217
218 nr_of_irqs += bank->nr_irqs;
219 nr_banks++;
220 }
221
222 printk(KERN_INFO "Total of %ld interrupts on %d active controller%s\n",
223 nr_of_irqs, nr_banks, nr_banks > 1 ? "s" : "");
224
225 for (i = 0; i < nr_of_irqs; i++) {
226 irq_set_chip_and_handler(i, &omap_irq_chip, handle_level_irq);
227 set_irq_flags(i, IRQF_VALID);
228 }
229 }
230
231 #ifdef CONFIG_ARCH_OMAP3
232 static struct omap3_intc_regs intc_context[ARRAY_SIZE(irq_banks)];
233
234 void omap_intc_save_context(void)
235 {
236 int ind = 0, i = 0;
237 for (ind = 0; ind < ARRAY_SIZE(irq_banks); ind++) {
238 struct omap_irq_bank *bank = irq_banks + ind;
239 intc_context[ind].sysconfig =
240 intc_bank_read_reg(bank, INTC_SYSCONFIG);
241 intc_context[ind].protection =
242 intc_bank_read_reg(bank, INTC_PROTECTION);
243 intc_context[ind].idle =
244 intc_bank_read_reg(bank, INTC_IDLE);
245 intc_context[ind].threshold =
246 intc_bank_read_reg(bank, INTC_THRESHOLD);
247 for (i = 0; i < INTCPS_NR_IRQS; i++)
248 intc_context[ind].ilr[i] =
249 intc_bank_read_reg(bank, (0x100 + 0x4*i));
250 for (i = 0; i < INTCPS_NR_MIR_REGS; i++)
251 intc_context[ind].mir[i] =
252 intc_bank_read_reg(&irq_banks[0], INTC_MIR0 +
253 (0x20 * i));
254 }
255 }
256
257 void omap_intc_restore_context(void)
258 {
259 int ind = 0, i = 0;
260
261 for (ind = 0; ind < ARRAY_SIZE(irq_banks); ind++) {
262 struct omap_irq_bank *bank = irq_banks + ind;
263 intc_bank_write_reg(intc_context[ind].sysconfig,
264 bank, INTC_SYSCONFIG);
265 intc_bank_write_reg(intc_context[ind].sysconfig,
266 bank, INTC_SYSCONFIG);
267 intc_bank_write_reg(intc_context[ind].protection,
268 bank, INTC_PROTECTION);
269 intc_bank_write_reg(intc_context[ind].idle,
270 bank, INTC_IDLE);
271 intc_bank_write_reg(intc_context[ind].threshold,
272 bank, INTC_THRESHOLD);
273 for (i = 0; i < INTCPS_NR_IRQS; i++)
274 intc_bank_write_reg(intc_context[ind].ilr[i],
275 bank, (0x100 + 0x4*i));
276 for (i = 0; i < INTCPS_NR_MIR_REGS; i++)
277 intc_bank_write_reg(intc_context[ind].mir[i],
278 &irq_banks[0], INTC_MIR0 + (0x20 * i));
279 }
280 /* MIRs are saved and restore with other PRCM registers */
281 }
282
283 void omap3_intc_suspend(void)
284 {
285 /* A pending interrupt would prevent OMAP from entering suspend */
286 omap_ack_irq(0);
287 }
288
289 void omap3_intc_prepare_idle(void)
290 {
291 /*
292 * Disable autoidle as it can stall interrupt controller,
293 * cf. errata ID i540 for 3430 (all revisions up to 3.1.x)
294 */
295 intc_bank_write_reg(0, &irq_banks[0], INTC_SYSCONFIG);
296 }
297
298 void omap3_intc_resume_idle(void)
299 {
300 /* Re-enable autoidle */
301 intc_bank_write_reg(1, &irq_banks[0], INTC_SYSCONFIG);
302 }
303 #endif /* CONFIG_ARCH_OMAP3 */
This page took 0.03794 seconds and 5 git commands to generate.