projects / deliverable / linux.git / blob
? search:


9dd93453e563eaa666b2640663d529dc9102c928
[deliverable/linux.git] / arch / arm / mach-omap2 / smartreflex.c
1 /*
2 * OMAP SmartReflex Voltage Control
3 *
4 * Author: Thara Gopinath <thara@ti.com>
5 *
6 * Copyright (C) 2010 Texas Instruments, Inc.
7 * Thara Gopinath <thara@ti.com>
8 *
9 * Copyright (C) 2008 Nokia Corporation
10 * Kalle Jokiniemi
11 *
12 * Copyright (C) 2007 Texas Instruments, Inc.
13 * Lesly A M <x0080970@ti.com>
14 *
15 * This program is free software; you can redistribute it and/or modify
16 * it under the terms of the GNU General Public License version 2 as
17 * published by the Free Software Foundation.
18 */
19
20 #include <linux/module.h>
21 #include <linux/interrupt.h>
22 #include <linux/clk.h>
23 #include <linux/io.h>
24 #include <linux/debugfs.h>
25 #include <linux/delay.h>
26 #include <linux/slab.h>
27 #include <linux/pm_runtime.h>
28
29 #include "common.h"
30
31 #include "pm.h"
32 #include "smartreflex.h"
33
34 #define SMARTREFLEX_NAME_LEN 16
35 #define NVALUE_NAME_LEN 40
36 #define SR_DISABLE_TIMEOUT 200
37
38 struct omap_sr {
39 int srid;
40 int ip_type;
41 int nvalue_count;
42 bool autocomp_active;
43 u32 clk_length;
44 u32 err_weight;
45 u32 err_minlimit;
46 u32 err_maxlimit;
47 u32 accum_data;
48 u32 senn_avgweight;
49 u32 senp_avgweight;
50 u32 senp_mod;
51 u32 senn_mod;
52 unsigned int irq;
53 void __iomem *base;
54 struct platform_device *pdev;
55 struct list_head node;
56 struct omap_sr_nvalue_table *nvalue_table;
57 struct voltagedomain *voltdm;
58 struct dentry *dbg_dir;
59 };
60
61 /* sr_list contains all the instances of smartreflex module */
62 static LIST_HEAD(sr_list);
63
64 static struct omap_sr_class_data *sr_class;
65 static struct omap_sr_pmic_data *sr_pmic_data;
66 static struct dentry *sr_dbg_dir;
67
68 static inline void sr_write_reg(struct omap_sr *sr, unsigned offset, u32 value)
69 {
70 __raw_writel(value, (sr->base + offset));
71 }
72
73 static inline void sr_modify_reg(struct omap_sr *sr, unsigned offset, u32 mask,
74 u32 value)
75 {
76 u32 reg_val;
77 u32 errconfig_offs = 0, errconfig_mask = 0;
78
79 reg_val = __raw_readl(sr->base + offset);
80 reg_val &= ~mask;
81
82 /*
83 * Smartreflex error config register is special as it contains
84 * certain status bits which if written a 1 into means a clear
85 * of those bits. So in order to make sure no accidental write of
86 * 1 happens to those status bits, do a clear of them in the read
87 * value. This mean this API doesn't rewrite values in these bits
88 * if they are currently set, but does allow the caller to write
89 * those bits.
90 */
91 if (sr->ip_type == SR_TYPE_V1) {
92 errconfig_offs = ERRCONFIG_V1;
93 errconfig_mask = ERRCONFIG_STATUS_V1_MASK;
94 } else if (sr->ip_type == SR_TYPE_V2) {
95 errconfig_offs = ERRCONFIG_V2;
96 errconfig_mask = ERRCONFIG_VPBOUNDINTST_V2;
97 }
98
99 if (offset == errconfig_offs)
100 reg_val &= ~errconfig_mask;
101
102 reg_val |= value;
103
104 __raw_writel(reg_val, (sr->base + offset));
105 }
106
107 static inline u32 sr_read_reg(struct omap_sr *sr, unsigned offset)
108 {
109 return __raw_readl(sr->base + offset);
110 }
111
112 static struct omap_sr *_sr_lookup(struct voltagedomain *voltdm)
113 {
114 struct omap_sr *sr_info;
115
116 if (!voltdm) {
117 pr_err("%s: Null voltage domain passed!\n", __func__);
118 return ERR_PTR(-EINVAL);
119 }
120
121 list_for_each_entry(sr_info, &sr_list, node) {
122 if (voltdm == sr_info->voltdm)
123 return sr_info;
124 }
125
126 return ERR_PTR(-ENODATA);
127 }
128
129 static irqreturn_t sr_interrupt(int irq, void *data)
130 {
131 struct omap_sr *sr_info = (struct omap_sr *)data;
132 u32 status = 0;
133
134 if (sr_info->ip_type == SR_TYPE_V1) {
135 /* Read the status bits */
136 status = sr_read_reg(sr_info, ERRCONFIG_V1);
137
138 /* Clear them by writing back */
139 sr_write_reg(sr_info, ERRCONFIG_V1, status);
140 } else if (sr_info->ip_type == SR_TYPE_V2) {
141 /* Read the status bits */
142 status = sr_read_reg(sr_info, IRQSTATUS);
143
144 /* Clear them by writing back */
145 sr_write_reg(sr_info, IRQSTATUS, status);
146 }
147
148 if (sr_class->notify)
149 sr_class->notify(sr_info->voltdm, status);
150
151 return IRQ_HANDLED;
152 }
153
154 static void sr_set_clk_length(struct omap_sr *sr)
155 {
156 struct clk *sys_ck;
157 u32 sys_clk_speed;
158
159 if (cpu_is_omap34xx())
160 sys_ck = clk_get(NULL, "sys_ck");
161 else
162 sys_ck = clk_get(NULL, "sys_clkin_ck");
163
164 if (IS_ERR(sys_ck)) {
165 dev_err(&sr->pdev->dev, "%s: unable to get sys clk\n",
166 __func__);
167 return;
168 }
169 sys_clk_speed = clk_get_rate(sys_ck);
170 clk_put(sys_ck);
171
172 switch (sys_clk_speed) {
173 case 12000000:
174 sr->clk_length = SRCLKLENGTH_12MHZ_SYSCLK;
175 break;
176 case 13000000:
177 sr->clk_length = SRCLKLENGTH_13MHZ_SYSCLK;
178 break;
179 case 19200000:
180 sr->clk_length = SRCLKLENGTH_19MHZ_SYSCLK;
181 break;
182 case 26000000:
183 sr->clk_length = SRCLKLENGTH_26MHZ_SYSCLK;
184 break;
185 case 38400000:
186 sr->clk_length = SRCLKLENGTH_38MHZ_SYSCLK;
187 break;
188 default:
189 dev_err(&sr->pdev->dev, "%s: Invalid sysclk value: %d\n",
190 __func__, sys_clk_speed);
191 break;
192 }
193 }
194
195 static void sr_set_regfields(struct omap_sr *sr)
196 {
197 /*
198 * For time being these values are defined in smartreflex.h
199 * and populated during init. May be they can be moved to board
200 * file or pmic specific data structure. In that case these structure
201 * fields will have to be populated using the pdata or pmic structure.
202 */
203 if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
204 sr->err_weight = OMAP3430_SR_ERRWEIGHT;
205 sr->err_maxlimit = OMAP3430_SR_ERRMAXLIMIT;
206 sr->accum_data = OMAP3430_SR_ACCUMDATA;
207 if (!(strcmp(sr->voltdm->name, "mpu"))) {
208 sr->senn_avgweight = OMAP3430_SR1_SENNAVGWEIGHT;
209 sr->senp_avgweight = OMAP3430_SR1_SENPAVGWEIGHT;
210 } else {
211 sr->senn_avgweight = OMAP3430_SR2_SENNAVGWEIGHT;
212 sr->senp_avgweight = OMAP3430_SR2_SENPAVGWEIGHT;
213 }
214 }
215 }
216
217 static void sr_start_vddautocomp(struct omap_sr *sr)
218 {
219 if (!sr_class || !(sr_class->enable) || !(sr_class->configure)) {
220 dev_warn(&sr->pdev->dev,
221 "%s: smartreflex class driver not registered\n",
222 __func__);
223 return;
224 }
225
226 if (!sr_class->enable(sr->voltdm))
227 sr->autocomp_active = true;
228 }
229
230 static void sr_stop_vddautocomp(struct omap_sr *sr)
231 {
232 if (!sr_class || !(sr_class->disable)) {
233 dev_warn(&sr->pdev->dev,
234 "%s: smartreflex class driver not registered\n",
235 __func__);
236 return;
237 }
238
239 if (sr->autocomp_active) {
240 sr_class->disable(sr->voltdm, 1);
241 sr->autocomp_active = false;
242 }
243 }
244
245 /*
246 * This function handles the intializations which have to be done
247 * only when both sr device and class driver regiter has
248 * completed. This will be attempted to be called from both sr class
249 * driver register and sr device intializtion API's. Only one call
250 * will ultimately succeed.
251 *
252 * Currently this function registers interrupt handler for a particular SR
253 * if smartreflex class driver is already registered and has
254 * requested for interrupts and the SR interrupt line in present.
255 */
256 static int sr_late_init(struct omap_sr *sr_info)
257 {
258 char *name;
259 struct omap_sr_data *pdata = sr_info->pdev->dev.platform_data;
260 struct resource *mem;
261 int ret = 0;
262
263 if (sr_class->notify && sr_class->notify_flags && sr_info->irq) {
264 name = kasprintf(GFP_KERNEL, "sr_%s", sr_info->voltdm->name);
265 if (name == NULL) {
266 ret = -ENOMEM;
267 goto error;
268 }
269 ret = request_irq(sr_info->irq, sr_interrupt,
270 0, name, (void *)sr_info);
271 if (ret)
272 goto error;
273 disable_irq(sr_info->irq);
274 }
275
276 if (pdata && pdata->enable_on_init)
277 sr_start_vddautocomp(sr_info);
278
279 return ret;
280
281 error:
282 iounmap(sr_info->base);
283 mem = platform_get_resource(sr_info->pdev, IORESOURCE_MEM, 0);
284 release_mem_region(mem->start, resource_size(mem));
285 list_del(&sr_info->node);
286 dev_err(&sr_info->pdev->dev, "%s: ERROR in registering"
287 "interrupt handler. Smartreflex will"
288 "not function as desired\n", __func__);
289 kfree(name);
290 kfree(sr_info);
291 return ret;
292 }
293
294 static void sr_v1_disable(struct omap_sr *sr)
295 {
296 int timeout = 0;
297
298 /* Enable MCUDisableAcknowledge interrupt */
299 sr_modify_reg(sr, ERRCONFIG_V1,
300 ERRCONFIG_MCUDISACKINTEN, ERRCONFIG_MCUDISACKINTEN);
301
302 /* SRCONFIG - disable SR */
303 sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, 0x0);
304
305 /* Disable all other SR interrupts and clear the status */
306 sr_modify_reg(sr, ERRCONFIG_V1,
307 (ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUVALIDINTEN |
308 ERRCONFIG_MCUBOUNDINTEN | ERRCONFIG_VPBOUNDINTEN_V1),
309 (ERRCONFIG_MCUACCUMINTST | ERRCONFIG_MCUVALIDINTST |
310 ERRCONFIG_MCUBOUNDINTST |
311 ERRCONFIG_VPBOUNDINTST_V1));
312
313 /*
314 * Wait for SR to be disabled.
315 * wait until ERRCONFIG.MCUDISACKINTST = 1. Typical latency is 1us.
316 */
317 omap_test_timeout((sr_read_reg(sr, ERRCONFIG_V1) &
318 ERRCONFIG_MCUDISACKINTST), SR_DISABLE_TIMEOUT,
319 timeout);
320
321 if (timeout >= SR_DISABLE_TIMEOUT)
322 dev_warn(&sr->pdev->dev, "%s: Smartreflex disable timedout\n",
323 __func__);
324
325 /* Disable MCUDisableAcknowledge interrupt & clear pending interrupt */
326 sr_modify_reg(sr, ERRCONFIG_V1, ERRCONFIG_MCUDISACKINTEN,
327 ERRCONFIG_MCUDISACKINTST);
328 }
329
330 static void sr_v2_disable(struct omap_sr *sr)
331 {
332 int timeout = 0;
333
334 /* Enable MCUDisableAcknowledge interrupt */
335 sr_write_reg(sr, IRQENABLE_SET, IRQENABLE_MCUDISABLEACKINT);
336
337 /* SRCONFIG - disable SR */
338 sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, 0x0);
339
340 /* Disable all other SR interrupts and clear the status */
341 sr_modify_reg(sr, ERRCONFIG_V2, ERRCONFIG_VPBOUNDINTEN_V2,
342 ERRCONFIG_VPBOUNDINTST_V2);
343 sr_write_reg(sr, IRQENABLE_CLR, (IRQENABLE_MCUACCUMINT |
344 IRQENABLE_MCUVALIDINT |
345 IRQENABLE_MCUBOUNDSINT));
346 sr_write_reg(sr, IRQSTATUS, (IRQSTATUS_MCUACCUMINT |
347 IRQSTATUS_MCVALIDINT |
348 IRQSTATUS_MCBOUNDSINT));
349
350 /*
351 * Wait for SR to be disabled.
352 * wait until IRQSTATUS.MCUDISACKINTST = 1. Typical latency is 1us.
353 */
354 omap_test_timeout((sr_read_reg(sr, IRQSTATUS) &
355 IRQSTATUS_MCUDISABLEACKINT), SR_DISABLE_TIMEOUT,
356 timeout);
357
358 if (timeout >= SR_DISABLE_TIMEOUT)
359 dev_warn(&sr->pdev->dev, "%s: Smartreflex disable timedout\n",
360 __func__);
361
362 /* Disable MCUDisableAcknowledge interrupt & clear pending interrupt */
363 sr_write_reg(sr, IRQENABLE_CLR, IRQENABLE_MCUDISABLEACKINT);
364 sr_write_reg(sr, IRQSTATUS, IRQSTATUS_MCUDISABLEACKINT);
365 }
366
367 static u32 sr_retrieve_nvalue(struct omap_sr *sr, u32 efuse_offs)
368 {
369 int i;
370
371 if (!sr->nvalue_table) {
372 dev_warn(&sr->pdev->dev, "%s: Missing ntarget value table\n",
373 __func__);
374 return 0;
375 }
376
377 for (i = 0; i < sr->nvalue_count; i++) {
378 if (sr->nvalue_table[i].efuse_offs == efuse_offs)
379 return sr->nvalue_table[i].nvalue;
380 }
381
382 return 0;
383 }
384
385 /* Public Functions */
386
387 /**
388 * sr_configure_errgen() - Configures the smrtreflex to perform AVS using the
389 * error generator module.
390 * @voltdm: VDD pointer to which the SR module to be configured belongs to.
391 *
392 * This API is to be called from the smartreflex class driver to
393 * configure the error generator module inside the smartreflex module.
394 * SR settings if using the ERROR module inside Smartreflex.
395 * SR CLASS 3 by default uses only the ERROR module where as
396 * SR CLASS 2 can choose between ERROR module and MINMAXAVG
397 * module. Returns 0 on success and error value in case of failure.
398 */
399 int sr_configure_errgen(struct voltagedomain *voltdm)
400 {
401 u32 sr_config, sr_errconfig, errconfig_offs, vpboundint_en;
402 u32 vpboundint_st, senp_en = 0, senn_en = 0;
403 u8 senp_shift, senn_shift;
404 struct omap_sr *sr = _sr_lookup(voltdm);
405
406 if (IS_ERR(sr)) {
407 pr_warning("%s: omap_sr struct for sr_%s not found\n",
408 __func__, voltdm->name);
409 return -EINVAL;
410 }
411
412 if (!sr->clk_length)
413 sr_set_clk_length(sr);
414
415 senp_en = sr->senp_mod;
416 senn_en = sr->senn_mod;
417
418 sr_config = (sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) |
419 SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN;
420
421 if (sr->ip_type == SR_TYPE_V1) {
422 sr_config |= SRCONFIG_DELAYCTRL;
423 senn_shift = SRCONFIG_SENNENABLE_V1_SHIFT;
424 senp_shift = SRCONFIG_SENPENABLE_V1_SHIFT;
425 errconfig_offs = ERRCONFIG_V1;
426 vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V1;
427 vpboundint_st = ERRCONFIG_VPBOUNDINTST_V1;
428 } else if (sr->ip_type == SR_TYPE_V2) {
429 senn_shift = SRCONFIG_SENNENABLE_V2_SHIFT;
430 senp_shift = SRCONFIG_SENPENABLE_V2_SHIFT;
431 errconfig_offs = ERRCONFIG_V2;
432 vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V2;
433 vpboundint_st = ERRCONFIG_VPBOUNDINTST_V2;
434 } else {
435 dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex"
436 "module without specifying the ip\n", __func__);
437 return -EINVAL;
438 }
439
440 sr_config |= ((senn_en << senn_shift) | (senp_en << senp_shift));
441 sr_write_reg(sr, SRCONFIG, sr_config);
442 sr_errconfig = (sr->err_weight << ERRCONFIG_ERRWEIGHT_SHIFT) |
443 (sr->err_maxlimit << ERRCONFIG_ERRMAXLIMIT_SHIFT) |
444 (sr->err_minlimit << ERRCONFIG_ERRMINLIMIT_SHIFT);
445 sr_modify_reg(sr, errconfig_offs, (SR_ERRWEIGHT_MASK |
446 SR_ERRMAXLIMIT_MASK | SR_ERRMINLIMIT_MASK),
447 sr_errconfig);
448
449 /* Enabling the interrupts if the ERROR module is used */
450 sr_modify_reg(sr, errconfig_offs,
451 vpboundint_en, (vpboundint_en | vpboundint_st));
452
453 return 0;
454 }
455
456 /**
457 * sr_configure_minmax() - Configures the smrtreflex to perform AVS using the
458 * minmaxavg module.
459 * @voltdm: VDD pointer to which the SR module to be configured belongs to.
460 *
461 * This API is to be called from the smartreflex class driver to
462 * configure the minmaxavg module inside the smartreflex module.
463 * SR settings if using the ERROR module inside Smartreflex.
464 * SR CLASS 3 by default uses only the ERROR module where as
465 * SR CLASS 2 can choose between ERROR module and MINMAXAVG
466 * module. Returns 0 on success and error value in case of failure.
467 */
468 int sr_configure_minmax(struct voltagedomain *voltdm)
469 {
470 u32 sr_config, sr_avgwt;
471 u32 senp_en = 0, senn_en = 0;
472 u8 senp_shift, senn_shift;
473 struct omap_sr *sr = _sr_lookup(voltdm);
474
475 if (IS_ERR(sr)) {
476 pr_warning("%s: omap_sr struct for sr_%s not found\n",
477 __func__, voltdm->name);
478 return -EINVAL;
479 }
480
481 if (!sr->clk_length)
482 sr_set_clk_length(sr);
483
484 senp_en = sr->senp_mod;
485 senn_en = sr->senn_mod;
486
487 sr_config = (sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) |
488 SRCONFIG_SENENABLE |
489 (sr->accum_data << SRCONFIG_ACCUMDATA_SHIFT);
490
491 if (sr->ip_type == SR_TYPE_V1) {
492 sr_config |= SRCONFIG_DELAYCTRL;
493 senn_shift = SRCONFIG_SENNENABLE_V1_SHIFT;
494 senp_shift = SRCONFIG_SENPENABLE_V1_SHIFT;
495 } else if (sr->ip_type == SR_TYPE_V2) {
496 senn_shift = SRCONFIG_SENNENABLE_V2_SHIFT;
497 senp_shift = SRCONFIG_SENPENABLE_V2_SHIFT;
498 } else {
499 dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex"
500 "module without specifying the ip\n", __func__);
501 return -EINVAL;
502 }
503
504 sr_config |= ((senn_en << senn_shift) | (senp_en << senp_shift));
505 sr_write_reg(sr, SRCONFIG, sr_config);
506 sr_avgwt = (sr->senp_avgweight << AVGWEIGHT_SENPAVGWEIGHT_SHIFT) |
507 (sr->senn_avgweight << AVGWEIGHT_SENNAVGWEIGHT_SHIFT);
508 sr_write_reg(sr, AVGWEIGHT, sr_avgwt);
509
510 /*
511 * Enabling the interrupts if MINMAXAVG module is used.
512 * TODO: check if all the interrupts are mandatory
513 */
514 if (sr->ip_type == SR_TYPE_V1) {
515 sr_modify_reg(sr, ERRCONFIG_V1,
516 (ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUVALIDINTEN |
517 ERRCONFIG_MCUBOUNDINTEN),
518 (ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUACCUMINTST |
519 ERRCONFIG_MCUVALIDINTEN | ERRCONFIG_MCUVALIDINTST |
520 ERRCONFIG_MCUBOUNDINTEN | ERRCONFIG_MCUBOUNDINTST));
521 } else if (sr->ip_type == SR_TYPE_V2) {
522 sr_write_reg(sr, IRQSTATUS,
523 IRQSTATUS_MCUACCUMINT | IRQSTATUS_MCVALIDINT |
524 IRQSTATUS_MCBOUNDSINT | IRQSTATUS_MCUDISABLEACKINT);
525 sr_write_reg(sr, IRQENABLE_SET,
526 IRQENABLE_MCUACCUMINT | IRQENABLE_MCUVALIDINT |
527 IRQENABLE_MCUBOUNDSINT | IRQENABLE_MCUDISABLEACKINT);
528 }
529
530 return 0;
531 }
532
533 /**
534 * sr_enable() - Enables the smartreflex module.
535 * @voltdm: VDD pointer to which the SR module to be configured belongs to.
536 * @volt: The voltage at which the Voltage domain associated with
537 * the smartreflex module is operating at.
538 * This is required only to program the correct Ntarget value.
539 *
540 * This API is to be called from the smartreflex class driver to
541 * enable a smartreflex module. Returns 0 on success. Returns error
542 * value if the voltage passed is wrong or if ntarget value is wrong.
543 */
544 int sr_enable(struct voltagedomain *voltdm, unsigned long volt)
545 {
546 u32 nvalue_reciprocal;
547 struct omap_volt_data *volt_data;
548 struct omap_sr *sr = _sr_lookup(voltdm);
549 int ret;
550
551 if (IS_ERR(sr)) {
552 pr_warning("%s: omap_sr struct for sr_%s not found\n",
553 __func__, voltdm->name);
554 return -EINVAL;
555 }
556
557 volt_data = omap_voltage_get_voltdata(sr->voltdm, volt);
558
559 if (IS_ERR(volt_data)) {
560 dev_warn(&sr->pdev->dev, "%s: Unable to get voltage table"
561 "for nominal voltage %ld\n", __func__, volt);
562 return -ENODATA;
563 }
564
565 nvalue_reciprocal = sr_retrieve_nvalue(sr, volt_data->sr_efuse_offs);
566
567 if (!nvalue_reciprocal) {
568 dev_warn(&sr->pdev->dev, "%s: NVALUE = 0 at voltage %ld\n",
569 __func__, volt);
570 return -ENODATA;
571 }
572
573 /* errminlimit is opp dependent and hence linked to voltage */
574 sr->err_minlimit = volt_data->sr_errminlimit;
575
576 pm_runtime_get_sync(&sr->pdev->dev);
577
578 /* Check if SR is already enabled. If yes do nothing */
579 if (sr_read_reg(sr, SRCONFIG) & SRCONFIG_SRENABLE)
580 return 0;
581
582 /* Configure SR */
583 ret = sr_class->configure(voltdm);
584 if (ret)
585 return ret;
586
587 sr_write_reg(sr, NVALUERECIPROCAL, nvalue_reciprocal);
588
589 /* SRCONFIG - enable SR */
590 sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, SRCONFIG_SRENABLE);
591 return 0;
592 }
593
594 /**
595 * sr_disable() - Disables the smartreflex module.
596 * @voltdm: VDD pointer to which the SR module to be configured belongs to.
597 *
598 * This API is to be called from the smartreflex class driver to
599 * disable a smartreflex module.
600 */
601 void sr_disable(struct voltagedomain *voltdm)
602 {
603 struct omap_sr *sr = _sr_lookup(voltdm);
604
605 if (IS_ERR(sr)) {
606 pr_warning("%s: omap_sr struct for sr_%s not found\n",
607 __func__, voltdm->name);
608 return;
609 }
610
611 /* Check if SR clocks are already disabled. If yes do nothing */
612 if (pm_runtime_suspended(&sr->pdev->dev))
613 return;
614
615 /*
616 * Disable SR if only it is indeed enabled. Else just
617 * disable the clocks.
618 */
619 if (sr_read_reg(sr, SRCONFIG) & SRCONFIG_SRENABLE) {
620 if (sr->ip_type == SR_TYPE_V1)
621 sr_v1_disable(sr);
622 else if (sr->ip_type == SR_TYPE_V2)
623 sr_v2_disable(sr);
624 }
625
626 pm_runtime_put_sync_suspend(&sr->pdev->dev);
627 }
628
629 /**
630 * sr_register_class() - API to register a smartreflex class parameters.
631 * @class_data: The structure containing various sr class specific data.
632 *
633 * This API is to be called by the smartreflex class driver to register itself
634 * with the smartreflex driver during init. Returns 0 on success else the
635 * error value.
636 */
637 int sr_register_class(struct omap_sr_class_data *class_data)
638 {
639 struct omap_sr *sr_info;
640
641 if (!class_data) {
642 pr_warning("%s:, Smartreflex class data passed is NULL\n",
643 __func__);
644 return -EINVAL;
645 }
646
647 if (sr_class) {
648 pr_warning("%s: Smartreflex class driver already registered\n",
649 __func__);
650 return -EBUSY;
651 }
652
653 sr_class = class_data;
654
655 /*
656 * Call into late init to do intializations that require
657 * both sr driver and sr class driver to be initiallized.
658 */
659 list_for_each_entry(sr_info, &sr_list, node)
660 sr_late_init(sr_info);
661
662 return 0;
663 }
664
665 /**
666 * omap_sr_enable() - API to enable SR clocks and to call into the
667 * registered smartreflex class enable API.
668 * @voltdm: VDD pointer to which the SR module to be configured belongs to.
669 *
670 * This API is to be called from the kernel in order to enable
671 * a particular smartreflex module. This API will do the initial
672 * configurations to turn on the smartreflex module and in turn call
673 * into the registered smartreflex class enable API.
674 */
675 void omap_sr_enable(struct voltagedomain *voltdm)
676 {
677 struct omap_sr *sr = _sr_lookup(voltdm);
678
679 if (IS_ERR(sr)) {
680 pr_warning("%s: omap_sr struct for sr_%s not found\n",
681 __func__, voltdm->name);
682 return;
683 }
684
685 if (!sr->autocomp_active)
686 return;
687
688 if (!sr_class || !(sr_class->enable) || !(sr_class->configure)) {
689 dev_warn(&sr->pdev->dev, "%s: smartreflex class driver not"
690 "registered\n", __func__);
691 return;
692 }
693
694 sr_class->enable(voltdm);
695 }
696
697 /**
698 * omap_sr_disable() - API to disable SR without resetting the voltage
699 * processor voltage
700 * @voltdm: VDD pointer to which the SR module to be configured belongs to.
701 *
702 * This API is to be called from the kernel in order to disable
703 * a particular smartreflex module. This API will in turn call
704 * into the registered smartreflex class disable API. This API will tell
705 * the smartreflex class disable not to reset the VP voltage after
706 * disabling smartreflex.
707 */
708 void omap_sr_disable(struct voltagedomain *voltdm)
709 {
710 struct omap_sr *sr = _sr_lookup(voltdm);
711
712 if (IS_ERR(sr)) {
713 pr_warning("%s: omap_sr struct for sr_%s not found\n",
714 __func__, voltdm->name);
715 return;
716 }
717
718 if (!sr->autocomp_active)
719 return;
720
721 if (!sr_class || !(sr_class->disable)) {
722 dev_warn(&sr->pdev->dev, "%s: smartreflex class driver not"
723 "registered\n", __func__);
724 return;
725 }
726
727 sr_class->disable(voltdm, 0);
728 }
729
730 /**
731 * omap_sr_disable_reset_volt() - API to disable SR and reset the
732 * voltage processor voltage
733 * @voltdm: VDD pointer to which the SR module to be configured belongs to.
734 *
735 * This API is to be called from the kernel in order to disable
736 * a particular smartreflex module. This API will in turn call
737 * into the registered smartreflex class disable API. This API will tell
738 * the smartreflex class disable to reset the VP voltage after
739 * disabling smartreflex.
740 */
741 void omap_sr_disable_reset_volt(struct voltagedomain *voltdm)
742 {
743 struct omap_sr *sr = _sr_lookup(voltdm);
744
745 if (IS_ERR(sr)) {
746 pr_warning("%s: omap_sr struct for sr_%s not found\n",
747 __func__, voltdm->name);
748 return;
749 }
750
751 if (!sr->autocomp_active)
752 return;
753
754 if (!sr_class || !(sr_class->disable)) {
755 dev_warn(&sr->pdev->dev, "%s: smartreflex class driver not"
756 "registered\n", __func__);
757 return;
758 }
759
760 sr_class->disable(voltdm, 1);
761 }
762
763 /**
764 * omap_sr_register_pmic() - API to register pmic specific info.
765 * @pmic_data: The structure containing pmic specific data.
766 *
767 * This API is to be called from the PMIC specific code to register with
768 * smartreflex driver pmic specific info. Currently the only info required
769 * is the smartreflex init on the PMIC side.
770 */
771 void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data)
772 {
773 if (!pmic_data) {
774 pr_warning("%s: Trying to register NULL PMIC data structure"
775 "with smartreflex\n", __func__);
776 return;
777 }
778
779 sr_pmic_data = pmic_data;
780 }
781
782 /* PM Debug Fs enteries to enable disable smartreflex. */
783 static int omap_sr_autocomp_show(void *data, u64 *val)
784 {
785 struct omap_sr *sr_info = (struct omap_sr *) data;
786
787 if (!sr_info) {
788 pr_warning("%s: omap_sr struct not found\n", __func__);
789 return -EINVAL;
790 }
791
792 *val = sr_info->autocomp_active;
793
794 return 0;
795 }
796
797 static int omap_sr_autocomp_store(void *data, u64 val)
798 {
799 struct omap_sr *sr_info = (struct omap_sr *) data;
800
801 if (!sr_info) {
802 pr_warning("%s: omap_sr struct not found\n", __func__);
803 return -EINVAL;
804 }
805
806 /* Sanity check */
807 if (val && (val != 1)) {
808 pr_warning("%s: Invalid argument %lld\n", __func__, val);
809 return -EINVAL;
810 }
811
812 /* control enable/disable only if there is a delta in value */
813 if (sr_info->autocomp_active != val) {
814 if (!val)
815 sr_stop_vddautocomp(sr_info);
816 else
817 sr_start_vddautocomp(sr_info);
818 }
819
820 return 0;
821 }
822
823 DEFINE_SIMPLE_ATTRIBUTE(pm_sr_fops, omap_sr_autocomp_show,
824 omap_sr_autocomp_store, "%llu\n");
825
826 static int __init omap_sr_probe(struct platform_device *pdev)
827 {
828 struct omap_sr *sr_info = kzalloc(sizeof(struct omap_sr), GFP_KERNEL);
829 struct omap_sr_data *pdata = pdev->dev.platform_data;
830 struct resource *mem, *irq;
831 struct dentry *nvalue_dir;
832 struct omap_volt_data *volt_data;
833 int i, ret = 0;
834 char *name;
835
836 if (!sr_info) {
837 dev_err(&pdev->dev, "%s: unable to allocate sr_info\n",
838 __func__);
839 return -ENOMEM;
840 }
841
842 if (!pdata) {
843 dev_err(&pdev->dev, "%s: platform data missing\n", __func__);
844 ret = -EINVAL;
845 goto err_free_devinfo;
846 }
847
848 mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
849 if (!mem) {
850 dev_err(&pdev->dev, "%s: no mem resource\n", __func__);
851 ret = -ENODEV;
852 goto err_free_devinfo;
853 }
854
855 mem = request_mem_region(mem->start, resource_size(mem),
856 dev_name(&pdev->dev));
857 if (!mem) {
858 dev_err(&pdev->dev, "%s: no mem region\n", __func__);
859 ret = -EBUSY;
860 goto err_free_devinfo;
861 }
862
863 irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
864
865 pm_runtime_enable(&pdev->dev);
866 pm_runtime_irq_safe(&pdev->dev);
867
868 sr_info->pdev = pdev;
869 sr_info->srid = pdev->id;
870 sr_info->voltdm = pdata->voltdm;
871 sr_info->nvalue_table = pdata->nvalue_table;
872 sr_info->nvalue_count = pdata->nvalue_count;
873 sr_info->senn_mod = pdata->senn_mod;
874 sr_info->senp_mod = pdata->senp_mod;
875 sr_info->autocomp_active = false;
876 sr_info->ip_type = pdata->ip_type;
877 sr_info->base = ioremap(mem->start, resource_size(mem));
878 if (!sr_info->base) {
879 dev_err(&pdev->dev, "%s: ioremap fail\n", __func__);
880 ret = -ENOMEM;
881 goto err_release_region;
882 }
883
884 if (irq)
885 sr_info->irq = irq->start;
886
887 sr_set_clk_length(sr_info);
888 sr_set_regfields(sr_info);
889
890 list_add(&sr_info->node, &sr_list);
891
892 /*
893 * Call into late init to do intializations that require
894 * both sr driver and sr class driver to be initiallized.
895 */
896 if (sr_class) {
897 ret = sr_late_init(sr_info);
898 if (ret) {
899 pr_warning("%s: Error in SR late init\n", __func__);
900 return ret;
901 }
902 }
903
904 dev_info(&pdev->dev, "%s: SmartReflex driver initialized\n", __func__);
905 if (!sr_dbg_dir) {
906 sr_dbg_dir = debugfs_create_dir("smartreflex", NULL);
907 if (!sr_dbg_dir) {
908 ret = PTR_ERR(sr_dbg_dir);
909 pr_err("%s:sr debugfs dir creation failed(%d)\n",
910 __func__, ret);
911 goto err_iounmap;
912 }
913 }
914
915 name = kasprintf(GFP_KERNEL, "sr_%s", sr_info->voltdm->name);
916 if (!name) {
917 dev_err(&pdev->dev, "%s: Unable to alloc debugfs name\n",
918 __func__);
919 ret = -ENOMEM;
920 goto err_iounmap;
921 }
922 sr_info->dbg_dir = debugfs_create_dir(name, sr_dbg_dir);
923 kfree(name);
924 if (IS_ERR(sr_info->dbg_dir)) {
925 dev_err(&pdev->dev, "%s: Unable to create debugfs directory\n",
926 __func__);
927 ret = PTR_ERR(sr_info->dbg_dir);
928 goto err_iounmap;
929 }
930
931 (void) debugfs_create_file("autocomp", S_IRUGO | S_IWUSR,
932 sr_info->dbg_dir, (void *)sr_info, &pm_sr_fops);
933 (void) debugfs_create_x32("errweight", S_IRUGO, sr_info->dbg_dir,
934 &sr_info->err_weight);
935 (void) debugfs_create_x32("errmaxlimit", S_IRUGO, sr_info->dbg_dir,
936 &sr_info->err_maxlimit);
937 (void) debugfs_create_x32("errminlimit", S_IRUGO, sr_info->dbg_dir,
938 &sr_info->err_minlimit);
939
940 nvalue_dir = debugfs_create_dir("nvalue", sr_info->dbg_dir);
941 if (IS_ERR(nvalue_dir)) {
942 dev_err(&pdev->dev, "%s: Unable to create debugfs directory"
943 "for n-values\n", __func__);
944 ret = PTR_ERR(nvalue_dir);
945 goto err_debugfs;
946 }
947
948 omap_voltage_get_volttable(sr_info->voltdm, &volt_data);
949 if (!volt_data) {
950 dev_warn(&pdev->dev, "%s: No Voltage table for the"
951 " corresponding vdd vdd_%s. Cannot create debugfs"
952 "entries for n-values\n",
953 __func__, sr_info->voltdm->name);
954 ret = -ENODATA;
955 goto err_debugfs;
956 }
957
958 for (i = 0; i < sr_info->nvalue_count; i++) {
959 char name[NVALUE_NAME_LEN + 1];
960
961 snprintf(name, sizeof(name), "volt_%d",
962 volt_data[i].volt_nominal);
963 (void) debugfs_create_x32(name, S_IRUGO | S_IWUSR, nvalue_dir,
964 &(sr_info->nvalue_table[i].nvalue));
965 }
966
967 return ret;
968
969 err_debugfs:
970 debugfs_remove_recursive(sr_info->dbg_dir);
971 err_iounmap:
972 list_del(&sr_info->node);
973 iounmap(sr_info->base);
974 err_release_region:
975 release_mem_region(mem->start, resource_size(mem));
976 err_free_devinfo:
977 kfree(sr_info);
978
979 return ret;
980 }
981
982 static int __devexit omap_sr_remove(struct platform_device *pdev)
983 {
984 struct omap_sr_data *pdata = pdev->dev.platform_data;
985 struct omap_sr *sr_info;
986 struct resource *mem;
987
988 if (!pdata) {
989 dev_err(&pdev->dev, "%s: platform data missing\n", __func__);
990 return -EINVAL;
991 }
992
993 sr_info = _sr_lookup(pdata->voltdm);
994 if (IS_ERR(sr_info)) {
995 dev_warn(&pdev->dev, "%s: omap_sr struct not found\n",
996 __func__);
997 return -EINVAL;
998 }
999
1000 if (sr_info->autocomp_active)
1001 sr_stop_vddautocomp(sr_info);
1002 if (sr_info->dbg_dir)
1003 debugfs_remove_recursive(sr_info->dbg_dir);
1004
1005 list_del(&sr_info->node);
1006 iounmap(sr_info->base);
1007 kfree(sr_info);
1008 mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1009 release_mem_region(mem->start, resource_size(mem));
1010
1011 return 0;
1012 }
1013
1014 static struct platform_driver smartreflex_driver = {
1015 .remove = omap_sr_remove,
1016 .driver = {
1017 .name = "smartreflex",
1018 },
1019 };
1020
1021 static int __init sr_init(void)
1022 {
1023 int ret = 0;
1024
1025 /*
1026 * sr_init is a late init. If by then a pmic specific API is not
1027 * registered either there is no need for anything to be done on
1028 * the PMIC side or somebody has forgotten to register a PMIC
1029 * handler. Warn for the second condition.
1030 */
1031 if (sr_pmic_data && sr_pmic_data->sr_pmic_init)
1032 sr_pmic_data->sr_pmic_init();
1033 else
1034 pr_warning("%s: No PMIC hook to init smartreflex\n", __func__);
1035
1036 ret = platform_driver_probe(&smartreflex_driver, omap_sr_probe);
1037 if (ret) {
1038 pr_err("%s: platform driver register failed for SR\n",
1039 __func__);
1040 return ret;
1041 }
1042
1043 return 0;
1044 }
1045
1046 static void __exit sr_exit(void)
1047 {
1048 platform_driver_unregister(&smartreflex_driver);
1049 }
1050 late_initcall(sr_init);
1051 module_exit(sr_exit);
1052
1053 MODULE_DESCRIPTION("OMAP Smartreflex Driver");
1054 MODULE_LICENSE("GPL");
1055 MODULE_ALIAS("platform:" DRIVER_NAME);
1056 MODULE_AUTHOR("Texas Instruments Inc");
Linux kernel - Deliverables
This page took 0.052568 seconds and 4 git commands to generate.