arch/arm/mach-omap2/usb-host.c

   1 /*
   2  * usb-host.c - OMAP USB Host
   3  *
   4  * This file will contain the board specific details for the
   5  * Synopsys EHCI/OHCI host controller on OMAP3430 and onwards
   6  *
   7  * Copyright (C) 2007-2011 Texas Instruments
   8  * Author: Vikram Pandita <vikram.pandita@ti.com>
   9  * Author: Keshava Munegowda <keshava_mgowda@ti.com>
  10  *
  11  * Generalization by:
  12  * Felipe Balbi <balbi@ti.com>
  13  *
  14  * This program is free software; you can redistribute it and/or modify
  15  * it under the terms of the GNU General Public License version 2 as
  16  * published by the Free Software Foundation.
  17  */
  18
  19 #include <linux/types.h>
  20 #include <linux/errno.h>
  21 #include <linux/delay.h>
  22 #include <linux/platform_device.h>
  23 #include <linux/slab.h>
  24 #include <linux/dma-mapping.h>
  25
  26 #include <asm/io.h>
  27
  28 #include <mach/hardware.h>
  29 #include <mach/irqs.h>
  30 #include <plat/usb.h>
  31 #include <plat/omap_device.h>
  32
  33 #include "mux.h"
  34
  35 #ifdef CONFIG_MFD_OMAP_USB_HOST
  36
  37 #define OMAP_USBHS_DEVICE       "usbhs_omap"
  38 #define USBHS_UHH_HWMODNAME     "usb_host_hs"
  39 #define USBHS_TLL_HWMODNAME     "usb_tll_hs"
  40
  41 static struct usbhs_omap_platform_data          usbhs_data;
  42 static struct ehci_hcd_omap_platform_data       ehci_data;
  43 static struct ohci_hcd_omap_platform_data       ohci_data;
  44
  45 static struct omap_device_pm_latency omap_uhhtll_latency[] = {
  46           {
  47                 .deactivate_func = omap_device_idle_hwmods,
  48                 .activate_func   = omap_device_enable_hwmods,
  49                 .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
  50           },
  51 };
  52
  53 /* MUX settings for EHCI pins */
  54 /*
  55  * setup_ehci_io_mux - initialize IO pad mux for USBHOST
  56  */
  57 static void __init setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
  58 {
  59         switch (port_mode[0]) {
  60         case OMAP_EHCI_PORT_MODE_PHY:
  61                 omap_mux_init_signal("hsusb1_stp", OMAP_PIN_OUTPUT);
  62                 omap_mux_init_signal("hsusb1_clk", OMAP_PIN_OUTPUT);
  63                 omap_mux_init_signal("hsusb1_dir", OMAP_PIN_INPUT_PULLDOWN);
  64                 omap_mux_init_signal("hsusb1_nxt", OMAP_PIN_INPUT_PULLDOWN);
  65                 omap_mux_init_signal("hsusb1_data0", OMAP_PIN_INPUT_PULLDOWN);
  66                 omap_mux_init_signal("hsusb1_data1", OMAP_PIN_INPUT_PULLDOWN);
  67                 omap_mux_init_signal("hsusb1_data2", OMAP_PIN_INPUT_PULLDOWN);
  68                 omap_mux_init_signal("hsusb1_data3", OMAP_PIN_INPUT_PULLDOWN);
  69                 omap_mux_init_signal("hsusb1_data4", OMAP_PIN_INPUT_PULLDOWN);
  70                 omap_mux_init_signal("hsusb1_data5", OMAP_PIN_INPUT_PULLDOWN);
  71                 omap_mux_init_signal("hsusb1_data6", OMAP_PIN_INPUT_PULLDOWN);
  72                 omap_mux_init_signal("hsusb1_data7", OMAP_PIN_INPUT_PULLDOWN);
  73                 break;
  74         case OMAP_EHCI_PORT_MODE_TLL:
  75                 omap_mux_init_signal("hsusb1_tll_stp",
  76                         OMAP_PIN_INPUT_PULLUP);
  77                 omap_mux_init_signal("hsusb1_tll_clk",
  78                         OMAP_PIN_INPUT_PULLDOWN);
  79                 omap_mux_init_signal("hsusb1_tll_dir",
  80                         OMAP_PIN_INPUT_PULLDOWN);
  81                 omap_mux_init_signal("hsusb1_tll_nxt",
  82                         OMAP_PIN_INPUT_PULLDOWN);
  83                 omap_mux_init_signal("hsusb1_tll_data0",
  84                         OMAP_PIN_INPUT_PULLDOWN);
  85                 omap_mux_init_signal("hsusb1_tll_data1",
  86                         OMAP_PIN_INPUT_PULLDOWN);
  87                 omap_mux_init_signal("hsusb1_tll_data2",
  88                         OMAP_PIN_INPUT_PULLDOWN);
  89                 omap_mux_init_signal("hsusb1_tll_data3",
  90                         OMAP_PIN_INPUT_PULLDOWN);
  91                 omap_mux_init_signal("hsusb1_tll_data4",
  92                         OMAP_PIN_INPUT_PULLDOWN);
  93                 omap_mux_init_signal("hsusb1_tll_data5",
  94                         OMAP_PIN_INPUT_PULLDOWN);
  95                 omap_mux_init_signal("hsusb1_tll_data6",
  96                         OMAP_PIN_INPUT_PULLDOWN);
  97                 omap_mux_init_signal("hsusb1_tll_data7",
  98                         OMAP_PIN_INPUT_PULLDOWN);
  99                 break;
 100         case OMAP_USBHS_PORT_MODE_UNUSED:
 101                 /* FALLTHROUGH */
 102         default:
 103                 break;
 104         }
 105
 106         switch (port_mode[1]) {
 107         case OMAP_EHCI_PORT_MODE_PHY:
 108                 omap_mux_init_signal("hsusb2_stp", OMAP_PIN_OUTPUT);
 109                 omap_mux_init_signal("hsusb2_clk", OMAP_PIN_OUTPUT);
 110                 omap_mux_init_signal("hsusb2_dir", OMAP_PIN_INPUT_PULLDOWN);
 111                 omap_mux_init_signal("hsusb2_nxt", OMAP_PIN_INPUT_PULLDOWN);
 112                 omap_mux_init_signal("hsusb2_data0",
 113                         OMAP_PIN_INPUT_PULLDOWN);
 114                 omap_mux_init_signal("hsusb2_data1",
 115                         OMAP_PIN_INPUT_PULLDOWN);
 116                 omap_mux_init_signal("hsusb2_data2",
 117                         OMAP_PIN_INPUT_PULLDOWN);
 118                 omap_mux_init_signal("hsusb2_data3",
 119                         OMAP_PIN_INPUT_PULLDOWN);
 120                 omap_mux_init_signal("hsusb2_data4",
 121                         OMAP_PIN_INPUT_PULLDOWN);
 122                 omap_mux_init_signal("hsusb2_data5",
 123                         OMAP_PIN_INPUT_PULLDOWN);
 124                 omap_mux_init_signal("hsusb2_data6",
 125                         OMAP_PIN_INPUT_PULLDOWN);
 126                 omap_mux_init_signal("hsusb2_data7",
 127                         OMAP_PIN_INPUT_PULLDOWN);
 128                 break;
 129         case OMAP_EHCI_PORT_MODE_TLL:
 130                 omap_mux_init_signal("hsusb2_tll_stp",
 131                         OMAP_PIN_INPUT_PULLUP);
 132                 omap_mux_init_signal("hsusb2_tll_clk",
 133                         OMAP_PIN_INPUT_PULLDOWN);
 134                 omap_mux_init_signal("hsusb2_tll_dir",
 135                         OMAP_PIN_INPUT_PULLDOWN);
 136                 omap_mux_init_signal("hsusb2_tll_nxt",
 137                         OMAP_PIN_INPUT_PULLDOWN);
 138                 omap_mux_init_signal("hsusb2_tll_data0",
 139                         OMAP_PIN_INPUT_PULLDOWN);
 140                 omap_mux_init_signal("hsusb2_tll_data1",
 141                         OMAP_PIN_INPUT_PULLDOWN);
 142                 omap_mux_init_signal("hsusb2_tll_data2",
 143                         OMAP_PIN_INPUT_PULLDOWN);
 144                 omap_mux_init_signal("hsusb2_tll_data3",
 145                         OMAP_PIN_INPUT_PULLDOWN);
 146                 omap_mux_init_signal("hsusb2_tll_data4",
 147                         OMAP_PIN_INPUT_PULLDOWN);
 148                 omap_mux_init_signal("hsusb2_tll_data5",
 149                         OMAP_PIN_INPUT_PULLDOWN);
 150                 omap_mux_init_signal("hsusb2_tll_data6",
 151                         OMAP_PIN_INPUT_PULLDOWN);
 152                 omap_mux_init_signal("hsusb2_tll_data7",
 153                         OMAP_PIN_INPUT_PULLDOWN);
 154                 break;
 155         case OMAP_USBHS_PORT_MODE_UNUSED:
 156                 /* FALLTHROUGH */
 157         default:
 158                 break;
 159         }
 160
 161         switch (port_mode[2]) {
 162         case OMAP_EHCI_PORT_MODE_PHY:
 163                 printk(KERN_WARNING "Port3 can't be used in PHY mode\n");
 164                 break;
 165         case OMAP_EHCI_PORT_MODE_TLL:
 166                 omap_mux_init_signal("hsusb3_tll_stp",
 167                         OMAP_PIN_INPUT_PULLUP);
 168                 omap_mux_init_signal("hsusb3_tll_clk",
 169                         OMAP_PIN_INPUT_PULLDOWN);
 170                 omap_mux_init_signal("hsusb3_tll_dir",
 171                         OMAP_PIN_INPUT_PULLDOWN);
 172                 omap_mux_init_signal("hsusb3_tll_nxt",
 173                         OMAP_PIN_INPUT_PULLDOWN);
 174                 omap_mux_init_signal("hsusb3_tll_data0",
 175                         OMAP_PIN_INPUT_PULLDOWN);
 176                 omap_mux_init_signal("hsusb3_tll_data1",
 177                         OMAP_PIN_INPUT_PULLDOWN);
 178                 omap_mux_init_signal("hsusb3_tll_data2",
 179                         OMAP_PIN_INPUT_PULLDOWN);
 180                 omap_mux_init_signal("hsusb3_tll_data3",
 181                         OMAP_PIN_INPUT_PULLDOWN);
 182                 omap_mux_init_signal("hsusb3_tll_data4",
 183                         OMAP_PIN_INPUT_PULLDOWN);
 184                 omap_mux_init_signal("hsusb3_tll_data5",
 185                         OMAP_PIN_INPUT_PULLDOWN);
 186                 omap_mux_init_signal("hsusb3_tll_data6",
 187                         OMAP_PIN_INPUT_PULLDOWN);
 188                 omap_mux_init_signal("hsusb3_tll_data7",
 189                         OMAP_PIN_INPUT_PULLDOWN);
 190                 break;
 191         case OMAP_USBHS_PORT_MODE_UNUSED:
 192                 /* FALLTHROUGH */
 193         default:
 194                 break;
 195         }
 196
 197         return;
 198 }
 199
 200 static
 201 void __init setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 202 {
 203         switch (port_mode[0]) {
 204         case OMAP_EHCI_PORT_MODE_PHY:
 205                 omap_mux_init_signal("usbb1_ulpiphy_stp",
 206                         OMAP_PIN_OUTPUT);
 207                 omap_mux_init_signal("usbb1_ulpiphy_clk",
 208                         OMAP_PIN_INPUT_PULLDOWN);
 209                 omap_mux_init_signal("usbb1_ulpiphy_dir",
 210                         OMAP_PIN_INPUT_PULLDOWN);
 211                 omap_mux_init_signal("usbb1_ulpiphy_nxt",
 212                         OMAP_PIN_INPUT_PULLDOWN);
 213                 omap_mux_init_signal("usbb1_ulpiphy_dat0",
 214                         OMAP_PIN_INPUT_PULLDOWN);
 215                 omap_mux_init_signal("usbb1_ulpiphy_dat1",
 216                         OMAP_PIN_INPUT_PULLDOWN);
 217                 omap_mux_init_signal("usbb1_ulpiphy_dat2",
 218                         OMAP_PIN_INPUT_PULLDOWN);
 219                 omap_mux_init_signal("usbb1_ulpiphy_dat3",
 220                         OMAP_PIN_INPUT_PULLDOWN);
 221                 omap_mux_init_signal("usbb1_ulpiphy_dat4",
 222                         OMAP_PIN_INPUT_PULLDOWN);
 223                 omap_mux_init_signal("usbb1_ulpiphy_dat5",
 224                         OMAP_PIN_INPUT_PULLDOWN);
 225                 omap_mux_init_signal("usbb1_ulpiphy_dat6",
 226                         OMAP_PIN_INPUT_PULLDOWN);
 227                 omap_mux_init_signal("usbb1_ulpiphy_dat7",
 228                         OMAP_PIN_INPUT_PULLDOWN);
 229                         break;
 230         case OMAP_EHCI_PORT_MODE_TLL:
 231                 omap_mux_init_signal("usbb1_ulpitll_stp",
 232                         OMAP_PIN_INPUT_PULLUP);
 233                 omap_mux_init_signal("usbb1_ulpitll_clk",
 234                         OMAP_PIN_INPUT_PULLDOWN);
 235                 omap_mux_init_signal("usbb1_ulpitll_dir",
 236                         OMAP_PIN_INPUT_PULLDOWN);
 237                 omap_mux_init_signal("usbb1_ulpitll_nxt",
 238                         OMAP_PIN_INPUT_PULLDOWN);
 239                 omap_mux_init_signal("usbb1_ulpitll_dat0",
 240                         OMAP_PIN_INPUT_PULLDOWN);
 241                 omap_mux_init_signal("usbb1_ulpitll_dat1",
 242                         OMAP_PIN_INPUT_PULLDOWN);
 243                 omap_mux_init_signal("usbb1_ulpitll_dat2",
 244                         OMAP_PIN_INPUT_PULLDOWN);
 245                 omap_mux_init_signal("usbb1_ulpitll_dat3",
 246                         OMAP_PIN_INPUT_PULLDOWN);
 247                 omap_mux_init_signal("usbb1_ulpitll_dat4",
 248                         OMAP_PIN_INPUT_PULLDOWN);
 249                 omap_mux_init_signal("usbb1_ulpitll_dat5",
 250                         OMAP_PIN_INPUT_PULLDOWN);
 251                 omap_mux_init_signal("usbb1_ulpitll_dat6",
 252                         OMAP_PIN_INPUT_PULLDOWN);
 253                 omap_mux_init_signal("usbb1_ulpitll_dat7",
 254                         OMAP_PIN_INPUT_PULLDOWN);
 255                         break;
 256         case OMAP_USBHS_PORT_MODE_UNUSED:
 257         default:
 258                         break;
 259         }
 260         switch (port_mode[1]) {
 261         case OMAP_EHCI_PORT_MODE_PHY:
 262                 omap_mux_init_signal("usbb2_ulpiphy_stp",
 263                         OMAP_PIN_OUTPUT);
 264                 omap_mux_init_signal("usbb2_ulpiphy_clk",
 265                         OMAP_PIN_INPUT_PULLDOWN);
 266                 omap_mux_init_signal("usbb2_ulpiphy_dir",
 267                         OMAP_PIN_INPUT_PULLDOWN);
 268                 omap_mux_init_signal("usbb2_ulpiphy_nxt",
 269                         OMAP_PIN_INPUT_PULLDOWN);
 270                 omap_mux_init_signal("usbb2_ulpiphy_dat0",
 271                         OMAP_PIN_INPUT_PULLDOWN);
 272                 omap_mux_init_signal("usbb2_ulpiphy_dat1",
 273                         OMAP_PIN_INPUT_PULLDOWN);
 274                 omap_mux_init_signal("usbb2_ulpiphy_dat2",
 275                         OMAP_PIN_INPUT_PULLDOWN);
 276                 omap_mux_init_signal("usbb2_ulpiphy_dat3",
 277                         OMAP_PIN_INPUT_PULLDOWN);
 278                 omap_mux_init_signal("usbb2_ulpiphy_dat4",
 279                         OMAP_PIN_INPUT_PULLDOWN);
 280                 omap_mux_init_signal("usbb2_ulpiphy_dat5",
 281                         OMAP_PIN_INPUT_PULLDOWN);
 282                 omap_mux_init_signal("usbb2_ulpiphy_dat6",
 283                         OMAP_PIN_INPUT_PULLDOWN);
 284                 omap_mux_init_signal("usbb2_ulpiphy_dat7",
 285                         OMAP_PIN_INPUT_PULLDOWN);
 286                         break;
 287         case OMAP_EHCI_PORT_MODE_TLL:
 288                 omap_mux_init_signal("usbb2_ulpitll_stp",
 289                         OMAP_PIN_INPUT_PULLUP);
 290                 omap_mux_init_signal("usbb2_ulpitll_clk",
 291                         OMAP_PIN_INPUT_PULLDOWN);
 292                 omap_mux_init_signal("usbb2_ulpitll_dir",
 293                         OMAP_PIN_INPUT_PULLDOWN);
 294                 omap_mux_init_signal("usbb2_ulpitll_nxt",
 295                         OMAP_PIN_INPUT_PULLDOWN);
 296                 omap_mux_init_signal("usbb2_ulpitll_dat0",
 297                         OMAP_PIN_INPUT_PULLDOWN);
 298                 omap_mux_init_signal("usbb2_ulpitll_dat1",
 299                         OMAP_PIN_INPUT_PULLDOWN);
 300                 omap_mux_init_signal("usbb2_ulpitll_dat2",
 301                         OMAP_PIN_INPUT_PULLDOWN);
 302                 omap_mux_init_signal("usbb2_ulpitll_dat3",
 303                         OMAP_PIN_INPUT_PULLDOWN);
 304                 omap_mux_init_signal("usbb2_ulpitll_dat4",
 305                         OMAP_PIN_INPUT_PULLDOWN);
 306                 omap_mux_init_signal("usbb2_ulpitll_dat5",
 307                         OMAP_PIN_INPUT_PULLDOWN);
 308                 omap_mux_init_signal("usbb2_ulpitll_dat6",
 309                         OMAP_PIN_INPUT_PULLDOWN);
 310                 omap_mux_init_signal("usbb2_ulpitll_dat7",
 311                         OMAP_PIN_INPUT_PULLDOWN);
 312                         break;
 313         case OMAP_USBHS_PORT_MODE_UNUSED:
 314         default:
 315                         break;
 316         }
 317 }
 318
 319 static void __init setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 320 {
 321         switch (port_mode[0]) {
 322         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
 323         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
 324         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
 325         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
 326                 omap_mux_init_signal("mm1_rxdp",
 327                         OMAP_PIN_INPUT_PULLDOWN);
 328                 omap_mux_init_signal("mm1_rxdm",
 329                         OMAP_PIN_INPUT_PULLDOWN);
 330                 /* FALLTHROUGH */
 331         case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
 332         case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
 333                 omap_mux_init_signal("mm1_rxrcv",
 334                         OMAP_PIN_INPUT_PULLDOWN);
 335                 /* FALLTHROUGH */
 336         case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
 337         case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
 338                 omap_mux_init_signal("mm1_txen_n", OMAP_PIN_OUTPUT);
 339                 /* FALLTHROUGH */
 340         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
 341         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
 342                 omap_mux_init_signal("mm1_txse0",
 343                         OMAP_PIN_INPUT_PULLDOWN);
 344                 omap_mux_init_signal("mm1_txdat",
 345                         OMAP_PIN_INPUT_PULLDOWN);
 346                 break;
 347         case OMAP_USBHS_PORT_MODE_UNUSED:
 348                 /* FALLTHROUGH */
 349         default:
 350                 break;
 351         }
 352         switch (port_mode[1]) {
 353         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
 354         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
 355         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
 356         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
 357                 omap_mux_init_signal("mm2_rxdp",
 358                         OMAP_PIN_INPUT_PULLDOWN);
 359                 omap_mux_init_signal("mm2_rxdm",
 360                         OMAP_PIN_INPUT_PULLDOWN);
 361                 /* FALLTHROUGH */
 362         case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
 363         case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
 364                 omap_mux_init_signal("mm2_rxrcv",
 365                         OMAP_PIN_INPUT_PULLDOWN);
 366                 /* FALLTHROUGH */
 367         case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
 368         case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
 369                 omap_mux_init_signal("mm2_txen_n", OMAP_PIN_OUTPUT);
 370                 /* FALLTHROUGH */
 371         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
 372         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
 373                 omap_mux_init_signal("mm2_txse0",
 374                         OMAP_PIN_INPUT_PULLDOWN);
 375                 omap_mux_init_signal("mm2_txdat",
 376                         OMAP_PIN_INPUT_PULLDOWN);
 377                 break;
 378         case OMAP_USBHS_PORT_MODE_UNUSED:
 379                 /* FALLTHROUGH */
 380         default:
 381                 break;
 382         }
 383         switch (port_mode[2]) {
 384         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
 385         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
 386         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
 387         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
 388                 omap_mux_init_signal("mm3_rxdp",
 389                         OMAP_PIN_INPUT_PULLDOWN);
 390                 omap_mux_init_signal("mm3_rxdm",
 391                         OMAP_PIN_INPUT_PULLDOWN);
 392                 /* FALLTHROUGH */
 393         case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
 394         case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
 395                 omap_mux_init_signal("mm3_rxrcv",
 396                         OMAP_PIN_INPUT_PULLDOWN);
 397                 /* FALLTHROUGH */
 398         case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
 399         case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
 400                 omap_mux_init_signal("mm3_txen_n", OMAP_PIN_OUTPUT);
 401                 /* FALLTHROUGH */
 402         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
 403         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
 404                 omap_mux_init_signal("mm3_txse0",
 405                         OMAP_PIN_INPUT_PULLDOWN);
 406                 omap_mux_init_signal("mm3_txdat",
 407                         OMAP_PIN_INPUT_PULLDOWN);
 408                 break;
 409         case OMAP_USBHS_PORT_MODE_UNUSED:
 410                 /* FALLTHROUGH */
 411         default:
 412                 break;
 413         }
 414 }
 415
 416 static
 417 void __init setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 418 {
 419         switch (port_mode[0]) {
 420         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
 421         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
 422         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
 423         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
 424                 omap_mux_init_signal("usbb1_mm_rxdp",
 425                         OMAP_PIN_INPUT_PULLDOWN);
 426                 omap_mux_init_signal("usbb1_mm_rxdm",
 427                         OMAP_PIN_INPUT_PULLDOWN);
 428
 429         case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
 430         case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
 431                 omap_mux_init_signal("usbb1_mm_rxrcv",
 432                         OMAP_PIN_INPUT_PULLDOWN);
 433
 434         case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
 435         case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
 436                 omap_mux_init_signal("usbb1_mm_txen",
 437                         OMAP_PIN_INPUT_PULLDOWN);
 438
 439
 440         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
 441         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
 442                 omap_mux_init_signal("usbb1_mm_txdat",
 443                         OMAP_PIN_INPUT_PULLDOWN);
 444                 omap_mux_init_signal("usbb1_mm_txse0",
 445                         OMAP_PIN_INPUT_PULLDOWN);
 446                 break;
 447
 448         case OMAP_USBHS_PORT_MODE_UNUSED:
 449         default:
 450                 break;
 451         }
 452
 453         switch (port_mode[1]) {
 454         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
 455         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
 456         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
 457         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
 458                 omap_mux_init_signal("usbb2_mm_rxdp",
 459                         OMAP_PIN_INPUT_PULLDOWN);
 460                 omap_mux_init_signal("usbb2_mm_rxdm",
 461                         OMAP_PIN_INPUT_PULLDOWN);
 462
 463         case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
 464         case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
 465                 omap_mux_init_signal("usbb2_mm_rxrcv",
 466                         OMAP_PIN_INPUT_PULLDOWN);
 467
 468         case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
 469         case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
 470                 omap_mux_init_signal("usbb2_mm_txen",
 471                         OMAP_PIN_INPUT_PULLDOWN);
 472
 473
 474         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
 475         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
 476                 omap_mux_init_signal("usbb2_mm_txdat",
 477                         OMAP_PIN_INPUT_PULLDOWN);
 478                 omap_mux_init_signal("usbb2_mm_txse0",
 479                         OMAP_PIN_INPUT_PULLDOWN);
 480                 break;
 481
 482         case OMAP_USBHS_PORT_MODE_UNUSED:
 483         default:
 484                 break;
 485         }
 486 }
 487
 488 void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
 489 {
 490         struct omap_hwmod       *oh[2];
 491         struct platform_device  *pdev;
 492         int                     bus_id = -1;
 493         int                     i;
 494
 495         for (i = 0; i < OMAP3_HS_USB_PORTS; i++) {
 496                 usbhs_data.port_mode[i] = pdata->port_mode[i];
 497                 ohci_data.port_mode[i] = pdata->port_mode[i];
 498                 ehci_data.port_mode[i] = pdata->port_mode[i];
 499                 ehci_data.reset_gpio_port[i] = pdata->reset_gpio_port[i];
 500                 ehci_data.regulator[i] = pdata->regulator[i];
 501         }
 502         ehci_data.phy_reset = pdata->phy_reset;
 503         ohci_data.es2_compatibility = pdata->es2_compatibility;
 504         usbhs_data.ehci_data = &ehci_data;
 505         usbhs_data.ohci_data = &ohci_data;
 506
 507         if (cpu_is_omap34xx()) {
 508                 setup_ehci_io_mux(pdata->port_mode);
 509                 setup_ohci_io_mux(pdata->port_mode);
 510         } else if (cpu_is_omap44xx()) {
 511                 setup_4430ehci_io_mux(pdata->port_mode);
 512                 setup_4430ohci_io_mux(pdata->port_mode);
 513         }
 514
 515         oh[0] = omap_hwmod_lookup(USBHS_UHH_HWMODNAME);
 516         if (!oh[0]) {
 517                 pr_err("Could not look up %s\n", USBHS_UHH_HWMODNAME);
 518                 return;
 519         }
 520
 521         oh[1] = omap_hwmod_lookup(USBHS_TLL_HWMODNAME);
 522         if (!oh[1]) {
 523                 pr_err("Could not look up %s\n", USBHS_TLL_HWMODNAME);
 524                 return;
 525         }
 526
 527         pdev = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2,
 528                                 (void *)&usbhs_data, sizeof(usbhs_data),
 529                                 omap_uhhtll_latency,
 530                                 ARRAY_SIZE(omap_uhhtll_latency), false);
 531         if (IS_ERR(pdev)) {
 532                 pr_err("Could not build hwmod devices %s,%s\n",
 533                         USBHS_UHH_HWMODNAME, USBHS_TLL_HWMODNAME);
 534                 return;
 535         }
 536 }
 537
 538 #else
 539
 540 void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
 541 {
 542 }
 543
 544 #endif