[ARM] orion5x: Add LaCie NAS d2Network support
[deliverable/linux.git] / arch / arm / mach-orion5x / wrt350n-v2-setup.c
1 /*
2 * arch/arm/mach-orion5x/wrt350n-v2-setup.c
3 *
4 * This file is licensed under the terms of the GNU General Public
5 * License version 2. This program is licensed "as is" without any
6 * warranty of any kind, whether express or implied.
7 */
8
9 #include <linux/kernel.h>
10 #include <linux/init.h>
11 #include <linux/platform_device.h>
12 #include <linux/pci.h>
13 #include <linux/irq.h>
14 #include <linux/delay.h>
15 #include <linux/mtd/physmap.h>
16 #include <linux/mv643xx_eth.h>
17 #include <linux/ethtool.h>
18 #include <net/dsa.h>
19 #include <asm/mach-types.h>
20 #include <asm/gpio.h>
21 #include <asm/mach/arch.h>
22 #include <asm/mach/pci.h>
23 #include <mach/orion5x.h>
24 #include "common.h"
25 #include "mpp.h"
26
27 static struct orion5x_mpp_mode wrt350n_v2_mpp_modes[] __initdata = {
28 { 0, MPP_GPIO }, /* Power LED green (0=on) */
29 { 1, MPP_GPIO }, /* Security LED (0=on) */
30 { 2, MPP_GPIO }, /* Internal Button (0=on) */
31 { 3, MPP_GPIO }, /* Reset Button (0=on) */
32 { 4, MPP_GPIO }, /* PCI int */
33 { 5, MPP_GPIO }, /* Power LED orange (0=on) */
34 { 6, MPP_GPIO }, /* USB LED (0=on) */
35 { 7, MPP_GPIO }, /* Wireless LED (0=on) */
36 { 8, MPP_UNUSED }, /* ??? */
37 { 9, MPP_GIGE }, /* GE_RXERR */
38 { 10, MPP_UNUSED }, /* ??? */
39 { 11, MPP_UNUSED }, /* ??? */
40 { 12, MPP_GIGE }, /* GE_TXD[4] */
41 { 13, MPP_GIGE }, /* GE_TXD[5] */
42 { 14, MPP_GIGE }, /* GE_TXD[6] */
43 { 15, MPP_GIGE }, /* GE_TXD[7] */
44 { 16, MPP_GIGE }, /* GE_RXD[4] */
45 { 17, MPP_GIGE }, /* GE_RXD[5] */
46 { 18, MPP_GIGE }, /* GE_RXD[6] */
47 { 19, MPP_GIGE }, /* GE_RXD[7] */
48 { -1 },
49 };
50
51 /*
52 * 8M NOR flash Device bus boot chip select
53 */
54 #define WRT350N_V2_NOR_BOOT_BASE 0xf4000000
55 #define WRT350N_V2_NOR_BOOT_SIZE SZ_8M
56
57 static struct mtd_partition wrt350n_v2_nor_flash_partitions[] = {
58 {
59 .name = "kernel",
60 .offset = 0x00000000,
61 .size = 0x00760000,
62 }, {
63 .name = "rootfs",
64 .offset = 0x001a0000,
65 .size = 0x005c0000,
66 }, {
67 .name = "lang",
68 .offset = 0x00760000,
69 .size = 0x00040000,
70 }, {
71 .name = "nvram",
72 .offset = 0x007a0000,
73 .size = 0x00020000,
74 }, {
75 .name = "u-boot",
76 .offset = 0x007c0000,
77 .size = 0x00040000,
78 },
79 };
80
81 static struct physmap_flash_data wrt350n_v2_nor_flash_data = {
82 .width = 1,
83 .parts = wrt350n_v2_nor_flash_partitions,
84 .nr_parts = ARRAY_SIZE(wrt350n_v2_nor_flash_partitions),
85 };
86
87 static struct resource wrt350n_v2_nor_flash_resource = {
88 .flags = IORESOURCE_MEM,
89 .start = WRT350N_V2_NOR_BOOT_BASE,
90 .end = WRT350N_V2_NOR_BOOT_BASE + WRT350N_V2_NOR_BOOT_SIZE - 1,
91 };
92
93 static struct platform_device wrt350n_v2_nor_flash = {
94 .name = "physmap-flash",
95 .id = 0,
96 .dev = {
97 .platform_data = &wrt350n_v2_nor_flash_data,
98 },
99 .num_resources = 1,
100 .resource = &wrt350n_v2_nor_flash_resource,
101 };
102
103 static struct mv643xx_eth_platform_data wrt350n_v2_eth_data = {
104 .phy_addr = MV643XX_ETH_PHY_NONE,
105 .speed = SPEED_1000,
106 .duplex = DUPLEX_FULL,
107 };
108
109 static struct dsa_chip_data wrt350n_v2_switch_chip_data = {
110 .port_names[0] = "lan2",
111 .port_names[1] = "lan1",
112 .port_names[2] = "wan",
113 .port_names[3] = "cpu",
114 .port_names[5] = "lan3",
115 .port_names[7] = "lan4",
116 };
117
118 static struct dsa_platform_data wrt350n_v2_switch_plat_data = {
119 .nr_chips = 1,
120 .chip = &wrt350n_v2_switch_chip_data,
121 };
122
123 static void __init wrt350n_v2_init(void)
124 {
125 /*
126 * Setup basic Orion functions. Need to be called early.
127 */
128 orion5x_init();
129
130 orion5x_mpp_conf(wrt350n_v2_mpp_modes);
131
132 /*
133 * Configure peripherals.
134 */
135 orion5x_ehci0_init();
136 orion5x_eth_init(&wrt350n_v2_eth_data);
137 orion5x_eth_switch_init(&wrt350n_v2_switch_plat_data, NO_IRQ);
138 orion5x_uart0_init();
139
140 orion5x_setup_dev_boot_win(WRT350N_V2_NOR_BOOT_BASE,
141 WRT350N_V2_NOR_BOOT_SIZE);
142 platform_device_register(&wrt350n_v2_nor_flash);
143 }
144
145 static int __init wrt350n_v2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
146 {
147 int irq;
148
149 /*
150 * Check for devices with hard-wired IRQs.
151 */
152 irq = orion5x_pci_map_irq(dev, slot, pin);
153 if (irq != -1)
154 return irq;
155
156 /*
157 * Mini-PCI slot.
158 */
159 if (slot == 7)
160 return gpio_to_irq(4);
161
162 return -1;
163 }
164
165 static struct hw_pci wrt350n_v2_pci __initdata = {
166 .nr_controllers = 2,
167 .swizzle = pci_std_swizzle,
168 .setup = orion5x_pci_sys_setup,
169 .scan = orion5x_pci_sys_scan_bus,
170 .map_irq = wrt350n_v2_pci_map_irq,
171 };
172
173 static int __init wrt350n_v2_pci_init(void)
174 {
175 if (machine_is_wrt350n_v2())
176 pci_common_init(&wrt350n_v2_pci);
177
178 return 0;
179 }
180 subsys_initcall(wrt350n_v2_pci_init);
181
182 MACHINE_START(WRT350N_V2, "Linksys WRT350N v2")
183 /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
184 .phys_io = ORION5X_REGS_PHYS_BASE,
185 .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
186 .boot_params = 0x00000100,
187 .init_machine = wrt350n_v2_init,
188 .map_io = orion5x_map_io,
189 .init_irq = orion5x_init_irq,
190 .timer = &orion5x_timer,
191 .fixup = tag_fixup_mem32,
192 MACHINE_END
This page took 0.045778 seconds and 5 git commands to generate.