arch/arm/mach-pxa/Kconfig

   1 if ARCH_PXA
   2
   3 menu "Intel PXA2xx/PXA3xx Implementations"
   4
   5 if PXA3xx
   6
   7 menu "Supported PXA3xx Processor Variants"
   8
   9 config CPU_PXA300
  10         bool "PXA300 (codename Monahans-L)"
  11
  12 config CPU_PXA310
  13         bool "PXA310 (codename Monahans-LV)"
  14         select CPU_PXA300
  15
  16 config CPU_PXA320
  17         bool "PXA320 (codename Monahans-P)"
  18
  19 endmenu
  20
  21 endif
  22
  23 choice
  24         prompt "Select target board"
  25
  26 config ARCH_GUMSTIX
  27         bool "Gumstix XScale boards"
  28         help
  29           Say Y here if you intend to run this kernel on a
  30           Gumstix Full Function Minature Computer.
  31
  32 config ARCH_LUBBOCK
  33         bool "Intel DBPXA250 Development Platform"
  34         select PXA25x
  35         select SA1111
  36
  37 config MACH_LOGICPD_PXA270
  38         bool "LogicPD PXA270 Card Engine Development Platform"
  39         select PXA27x
  40
  41 config MACH_MAINSTONE
  42         bool "Intel HCDDBBVA0 Development Platform"
  43         select PXA27x
  44
  45 config ARCH_PXA_IDP
  46         bool "Accelent Xscale IDP"
  47         select PXA25x
  48
  49 config PXA_SHARPSL
  50         bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
  51         select SHARP_SCOOP
  52         select SHARP_PARAM
  53         help
  54           Say Y here if you intend to run this kernel on a
  55           Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
  56           SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
  57           SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
  58           handheld computer.
  59
  60 config ARCH_PXA_ESERIES
  61         bool "PXA based Toshiba e-series PDAs"
  62         select PXA25x
  63
  64 config MACH_E330
  65         bool "Toshiba e330"
  66         default y
  67         depends on ARCH_PXA_ESERIES
  68         help
  69           Say Y here if you intend to run this kernel on a Toshiba
  70           e330 family PDA.
  71
  72 config MACH_E740
  73         bool "Toshiba e740"
  74         default y
  75         depends on ARCH_PXA_ESERIES
  76         help
  77           Say Y here if you intend to run this kernel on a Toshiba
  78           e740 family PDA.
  79
  80 config MACH_E750
  81         bool "Toshiba e750"
  82         default y
  83         depends on ARCH_PXA_ESERIES
  84         help
  85           Say Y here if you intend to run this kernel on a Toshiba
  86           e750 family PDA.
  87
  88 config MACH_E400
  89         bool "Toshiba e400"
  90         default y
  91         depends on ARCH_PXA_ESERIES
  92         help
  93           Say Y here if you intend to run this kernel on a Toshiba
  94           e400 family PDA.
  95
  96 config MACH_E800
  97         bool "Toshiba e800"
  98         default y
  99         depends on ARCH_PXA_ESERIES
 100         help
 101           Say Y here if you intend to run this kernel on a Toshiba
 102           e800 family PDA.
 103
 104 config MACH_TRIZEPS4
 105         bool "Keith und Koep Trizeps4 DIMM-Module"
 106         select PXA27x
 107
 108 config MACH_EM_X270
 109         bool "CompuLab EM-x270 platform"
 110         select PXA27x
 111
 112 config MACH_COLIBRI
 113         bool "Toradex Colibri PX27x"
 114         select PXA27x
 115
 116 config MACH_ZYLONITE
 117         bool "PXA3xx Development Platform"
 118         select PXA3xx
 119
 120 config MACH_LITTLETON
 121         bool "PXA3xx Form Factor Platform (aka Littleton)"
 122         select PXA3xx
 123         select PXA_SSP
 124
 125 config MACH_ARMCORE
 126         bool "CompuLab CM-X270 modules"
 127         select PXA27x
 128         select IWMMXT
 129
 130 config MACH_MAGICIAN
 131         bool "Enable HTC Magician Support"
 132         depends on ARCH_PXA
 133         select PXA27x
 134         select IWMMXT
 135
 136 config MACH_PCM027
 137         bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
 138         select PXA27x
 139         select IWMMXT
 140
 141 endchoice
 142
 143 choice
 144         prompt "Used baseboard"
 145         depends on MACH_PCM027
 146
 147 config MACH_PCM990_BASEBOARD
 148         bool "PHYTEC PCM-990 development board"
 149
 150 endchoice
 151
 152 if PXA_SHARPSL
 153
 154 choice
 155         prompt "Select target Sharp Zaurus device range"
 156
 157 config PXA_SHARPSL_25x
 158         bool "Sharp PXA25x models (SL-5600, SL-C7xx and SL-C6000x)"
 159         select PXA25x
 160
 161 config PXA_SHARPSL_27x
 162         bool "Sharp PXA270 models (SL-Cxx00)"
 163         select PXA27x
 164
 165 endchoice
 166
 167 endif
 168
 169 if ARCH_GUMSTIX
 170
 171 choice
 172         prompt "Select target Gumstix board"
 173
 174 config MACH_GUMSTIX_F
 175         bool "Basix, Connex, ws-200ax, ws-400ax systems"
 176         select PXA25x
 177
 178 endchoice
 179
 180 endif
 181
 182
 183 if MACH_TRIZEPS4
 184
 185 choice
 186         prompt "Select base board for Trizeps 4 module"
 187
 188 config MACH_TRIZEPS4_CONXS
 189         bool "ConXS Eval Board"
 190
 191 config MACH_TRIZEPS4_ANY
 192         bool "another Board"
 193
 194 endchoice
 195
 196 endif
 197
 198 endmenu
 199
 200 config MACH_POODLE
 201         bool "Enable Sharp SL-5600 (Poodle) Support"
 202         depends on PXA_SHARPSL_25x
 203         select SHARP_LOCOMO
 204         select PXA_SSP
 205
 206 config MACH_CORGI
 207         bool "Enable Sharp SL-C700 (Corgi) Support"
 208         depends on PXA_SHARPSL_25x
 209         select PXA_SHARP_C7xx
 210
 211 config MACH_SHEPHERD
 212         bool "Enable Sharp SL-C750 (Shepherd) Support"
 213         depends on PXA_SHARPSL_25x
 214         select PXA_SHARP_C7xx
 215
 216 config MACH_HUSKY
 217         bool "Enable Sharp SL-C760 (Husky) Support"
 218         depends on PXA_SHARPSL_25x
 219         select PXA_SHARP_C7xx
 220
 221 config MACH_AKITA
 222         bool "Enable Sharp SL-1000 (Akita) Support"
 223         depends on PXA_SHARPSL_27x
 224         select PXA_SHARP_Cxx00
 225         select MACH_SPITZ
 226         select I2C
 227         select I2C_PXA
 228
 229 config MACH_SPITZ
 230         bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
 231         depends on PXA_SHARPSL_27x
 232         select PXA_SHARP_Cxx00
 233
 234 config MACH_BORZOI
 235         bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
 236         depends on PXA_SHARPSL_27x
 237         select PXA_SHARP_Cxx00
 238
 239 config MACH_TOSA
 240         bool "Enable Sharp SL-6000x (Tosa) Support"
 241         depends on PXA_SHARPSL_25x
 242
 243 config PXA25x
 244         bool
 245         help
 246           Select code specific to PXA21x/25x/26x variants
 247
 248 config PXA27x
 249         bool
 250         help
 251           Select code specific to PXA27x variants
 252
 253 config PXA3xx
 254         bool
 255         help
 256           Select code specific to PXA3xx variants
 257
 258 config PXA_SHARP_C7xx
 259         bool
 260         select PXA_SSP
 261         select SHARPSL_PM
 262         help
 263           Enable support for all Sharp C7xx models
 264
 265 config PXA_SHARP_Cxx00
 266         bool
 267         select PXA_SSP
 268         select SHARPSL_PM
 269         help
 270           Enable common support for Sharp Cxx00 models
 271
 272 config PXA_SSP
 273         tristate
 274         help
 275           Enable support for PXA2xx SSP ports
 276 endif