[ARM] 5085/2: PXA: Move AC97 over to the new central device declaration model
[deliverable/linux.git] / arch / arm / mach-pxa / lubbock.c
1 /*
2 * linux/arch/arm/mach-pxa/lubbock.c
3 *
4 * Support for the Intel DBPXA250 Development Platform.
5 *
6 * Author: Nicolas Pitre
7 * Created: Jun 15, 2001
8 * Copyright: MontaVista Software Inc.
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
13 */
14 #include <linux/module.h>
15 #include <linux/kernel.h>
16 #include <linux/init.h>
17 #include <linux/platform_device.h>
18 #include <linux/sysdev.h>
19 #include <linux/major.h>
20 #include <linux/fb.h>
21 #include <linux/interrupt.h>
22 #include <linux/mtd/mtd.h>
23 #include <linux/mtd/partitions.h>
24
25 #include <linux/spi/spi.h>
26 #include <linux/spi/ads7846.h>
27 #include <asm/arch/pxa2xx_spi.h>
28
29 #include <asm/setup.h>
30 #include <asm/memory.h>
31 #include <asm/mach-types.h>
32 #include <asm/hardware.h>
33 #include <asm/irq.h>
34 #include <asm/sizes.h>
35
36 #include <asm/mach/arch.h>
37 #include <asm/mach/map.h>
38 #include <asm/mach/irq.h>
39 #include <asm/mach/flash.h>
40
41 #include <asm/hardware/sa1111.h>
42
43 #include <asm/arch/pxa-regs.h>
44 #include <asm/arch/pxa2xx-regs.h>
45 #include <asm/arch/mfp-pxa25x.h>
46 #include <asm/arch/audio.h>
47 #include <asm/arch/lubbock.h>
48 #include <asm/arch/udc.h>
49 #include <asm/arch/irda.h>
50 #include <asm/arch/pxafb.h>
51 #include <asm/arch/mmc.h>
52
53 #include "generic.h"
54 #include "devices.h"
55
56 static unsigned long lubbock_pin_config[] __initdata = {
57 GPIO15_nCS_1, /* CS1 - Flash */
58 GPIO79_nCS_3, /* CS3 - SMC ethernet */
59
60 /* SSP data pins */
61 GPIO23_SSP1_SCLK,
62 GPIO25_SSP1_TXD,
63 GPIO26_SSP1_RXD,
64
65 /* BTUART */
66 GPIO42_BTUART_RXD,
67 GPIO43_BTUART_TXD,
68 GPIO44_BTUART_CTS,
69 GPIO45_BTUART_RTS,
70
71 /* PC Card */
72 GPIO48_nPOE,
73 GPIO49_nPWE,
74 GPIO50_nPIOR,
75 GPIO51_nPIOW,
76 GPIO52_nPCE_1,
77 GPIO53_nPCE_2,
78 GPIO54_nPSKTSEL,
79 GPIO55_nPREG,
80 GPIO56_nPWAIT,
81 GPIO57_nIOIS16,
82
83 /* MMC */
84 GPIO6_MMC_CLK,
85 GPIO8_MMC_CS0,
86
87 /* wakeup */
88 GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
89 };
90
91 #define LUB_MISC_WR __LUB_REG(LUBBOCK_FPGA_PHYS + 0x080)
92
93 void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
94 {
95 unsigned long flags;
96
97 local_irq_save(flags);
98 LUB_MISC_WR = (LUB_MISC_WR & ~mask) | (set & mask);
99 local_irq_restore(flags);
100 }
101 EXPORT_SYMBOL(lubbock_set_misc_wr);
102
103 static unsigned long lubbock_irq_enabled;
104
105 static void lubbock_mask_irq(unsigned int irq)
106 {
107 int lubbock_irq = (irq - LUBBOCK_IRQ(0));
108 LUB_IRQ_MASK_EN = (lubbock_irq_enabled &= ~(1 << lubbock_irq));
109 }
110
111 static void lubbock_unmask_irq(unsigned int irq)
112 {
113 int lubbock_irq = (irq - LUBBOCK_IRQ(0));
114 /* the irq can be acknowledged only if deasserted, so it's done here */
115 LUB_IRQ_SET_CLR &= ~(1 << lubbock_irq);
116 LUB_IRQ_MASK_EN = (lubbock_irq_enabled |= (1 << lubbock_irq));
117 }
118
119 static struct irq_chip lubbock_irq_chip = {
120 .name = "FPGA",
121 .ack = lubbock_mask_irq,
122 .mask = lubbock_mask_irq,
123 .unmask = lubbock_unmask_irq,
124 };
125
126 static void lubbock_irq_handler(unsigned int irq, struct irq_desc *desc)
127 {
128 unsigned long pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
129 do {
130 GEDR(0) = GPIO_bit(0); /* clear our parent irq */
131 if (likely(pending)) {
132 irq = LUBBOCK_IRQ(0) + __ffs(pending);
133 desc = irq_desc + irq;
134 desc_handle_irq(irq, desc);
135 }
136 pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
137 } while (pending);
138 }
139
140 static void __init lubbock_init_irq(void)
141 {
142 int irq;
143
144 pxa25x_init_irq();
145
146 /* setup extra lubbock irqs */
147 for (irq = LUBBOCK_IRQ(0); irq <= LUBBOCK_LAST_IRQ; irq++) {
148 set_irq_chip(irq, &lubbock_irq_chip);
149 set_irq_handler(irq, handle_level_irq);
150 set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
151 }
152
153 set_irq_chained_handler(IRQ_GPIO(0), lubbock_irq_handler);
154 set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
155 }
156
157 #ifdef CONFIG_PM
158
159 static int lubbock_irq_resume(struct sys_device *dev)
160 {
161 LUB_IRQ_MASK_EN = lubbock_irq_enabled;
162 return 0;
163 }
164
165 static struct sysdev_class lubbock_irq_sysclass = {
166 .name = "cpld_irq",
167 .resume = lubbock_irq_resume,
168 };
169
170 static struct sys_device lubbock_irq_device = {
171 .cls = &lubbock_irq_sysclass,
172 };
173
174 static int __init lubbock_irq_device_init(void)
175 {
176 int ret = -ENODEV;
177
178 if (machine_is_lubbock()) {
179 ret = sysdev_class_register(&lubbock_irq_sysclass);
180 if (ret == 0)
181 ret = sysdev_register(&lubbock_irq_device);
182 }
183 return ret;
184 }
185
186 device_initcall(lubbock_irq_device_init);
187
188 #endif
189
190 static int lubbock_udc_is_connected(void)
191 {
192 return (LUB_MISC_RD & (1 << 9)) == 0;
193 }
194
195 static struct pxa2xx_udc_mach_info udc_info __initdata = {
196 .udc_is_connected = lubbock_udc_is_connected,
197 // no D+ pullup; lubbock can't connect/disconnect in software
198 };
199
200 static struct resource sa1111_resources[] = {
201 [0] = {
202 .start = 0x10000000,
203 .end = 0x10001fff,
204 .flags = IORESOURCE_MEM,
205 },
206 [1] = {
207 .start = LUBBOCK_SA1111_IRQ,
208 .end = LUBBOCK_SA1111_IRQ,
209 .flags = IORESOURCE_IRQ,
210 },
211 };
212
213 static struct platform_device sa1111_device = {
214 .name = "sa1111",
215 .id = -1,
216 .num_resources = ARRAY_SIZE(sa1111_resources),
217 .resource = sa1111_resources,
218 };
219
220 /* ADS7846 is connected through SSP ... and if your board has J5 populated,
221 * you can select it to replace the ucb1400 by switching the touchscreen cable
222 * (to J5) and poking board registers (as done below). Else it's only useful
223 * for the temperature sensors.
224 */
225 static struct pxa2xx_spi_master pxa_ssp_master_info = {
226 .num_chipselect = 0,
227 };
228
229 static struct platform_device pxa_ssp = {
230 .name = "pxa2xx-spi",
231 .id = 1,
232 .dev = {
233 .platform_data = &pxa_ssp_master_info,
234 },
235 };
236
237 static int lubbock_ads7846_pendown_state(void)
238 {
239 /* TS_BUSY is bit 8 in LUB_MISC_RD, but pendown is irq-only */
240 return 0;
241 }
242
243 static struct ads7846_platform_data ads_info = {
244 .model = 7846,
245 .vref_delay_usecs = 100, /* internal, no cap */
246 .get_pendown_state = lubbock_ads7846_pendown_state,
247 // .x_plate_ohms = 500, /* GUESS! */
248 // .y_plate_ohms = 500, /* GUESS! */
249 };
250
251 static void ads7846_cs(u32 command)
252 {
253 static const unsigned TS_nCS = 1 << 11;
254 lubbock_set_misc_wr(TS_nCS, (command == PXA2XX_CS_ASSERT) ? 0 : TS_nCS);
255 }
256
257 static struct pxa2xx_spi_chip ads_hw = {
258 .tx_threshold = 1,
259 .rx_threshold = 2,
260 .cs_control = ads7846_cs,
261 };
262
263 static struct spi_board_info spi_board_info[] __initdata = { {
264 .modalias = "ads7846",
265 .platform_data = &ads_info,
266 .controller_data = &ads_hw,
267 .irq = LUBBOCK_BB_IRQ,
268 .max_speed_hz = 120000 /* max sample rate at 3V */
269 * 26 /* command + data + overhead */,
270 .bus_num = 1,
271 .chip_select = 0,
272 },
273 };
274
275 static struct resource smc91x_resources[] = {
276 [0] = {
277 .name = "smc91x-regs",
278 .start = 0x0c000c00,
279 .end = 0x0c0fffff,
280 .flags = IORESOURCE_MEM,
281 },
282 [1] = {
283 .start = LUBBOCK_ETH_IRQ,
284 .end = LUBBOCK_ETH_IRQ,
285 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
286 },
287 [2] = {
288 .name = "smc91x-attrib",
289 .start = 0x0e000000,
290 .end = 0x0e0fffff,
291 .flags = IORESOURCE_MEM,
292 },
293 };
294
295 static struct platform_device smc91x_device = {
296 .name = "smc91x",
297 .id = -1,
298 .num_resources = ARRAY_SIZE(smc91x_resources),
299 .resource = smc91x_resources,
300 };
301
302 static struct resource flash_resources[] = {
303 [0] = {
304 .start = 0x00000000,
305 .end = SZ_64M - 1,
306 .flags = IORESOURCE_MEM,
307 },
308 [1] = {
309 .start = 0x04000000,
310 .end = 0x04000000 + SZ_64M - 1,
311 .flags = IORESOURCE_MEM,
312 },
313 };
314
315 static struct mtd_partition lubbock_partitions[] = {
316 {
317 .name = "Bootloader",
318 .size = 0x00040000,
319 .offset = 0,
320 .mask_flags = MTD_WRITEABLE /* force read-only */
321 },{
322 .name = "Kernel",
323 .size = 0x00100000,
324 .offset = 0x00040000,
325 },{
326 .name = "Filesystem",
327 .size = MTDPART_SIZ_FULL,
328 .offset = 0x00140000
329 }
330 };
331
332 static struct flash_platform_data lubbock_flash_data[2] = {
333 {
334 .map_name = "cfi_probe",
335 .parts = lubbock_partitions,
336 .nr_parts = ARRAY_SIZE(lubbock_partitions),
337 }, {
338 .map_name = "cfi_probe",
339 .parts = NULL,
340 .nr_parts = 0,
341 }
342 };
343
344 static struct platform_device lubbock_flash_device[2] = {
345 {
346 .name = "pxa2xx-flash",
347 .id = 0,
348 .dev = {
349 .platform_data = &lubbock_flash_data[0],
350 },
351 .resource = &flash_resources[0],
352 .num_resources = 1,
353 },
354 {
355 .name = "pxa2xx-flash",
356 .id = 1,
357 .dev = {
358 .platform_data = &lubbock_flash_data[1],
359 },
360 .resource = &flash_resources[1],
361 .num_resources = 1,
362 },
363 };
364
365 static struct platform_device *devices[] __initdata = {
366 &sa1111_device,
367 &smc91x_device,
368 &lubbock_flash_device[0],
369 &lubbock_flash_device[1],
370 &pxa_ssp,
371 };
372
373 static struct pxafb_mode_info sharp_lm8v31_mode = {
374 .pixclock = 270000,
375 .xres = 640,
376 .yres = 480,
377 .bpp = 16,
378 .hsync_len = 1,
379 .left_margin = 3,
380 .right_margin = 3,
381 .vsync_len = 1,
382 .upper_margin = 0,
383 .lower_margin = 0,
384 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
385 .cmap_greyscale = 0,
386 };
387
388 static struct pxafb_mach_info sharp_lm8v31 = {
389 .modes = &sharp_lm8v31_mode,
390 .num_modes = 1,
391 .cmap_inverse = 0,
392 .cmap_static = 0,
393 .lcd_conn = LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL |
394 LCD_AC_BIAS_FREQ(255),
395 };
396
397 #define MMC_POLL_RATE msecs_to_jiffies(1000)
398
399 static void lubbock_mmc_poll(unsigned long);
400 static irq_handler_t mmc_detect_int;
401
402 static struct timer_list mmc_timer = {
403 .function = lubbock_mmc_poll,
404 };
405
406 static void lubbock_mmc_poll(unsigned long data)
407 {
408 unsigned long flags;
409
410 /* clear any previous irq state, then ... */
411 local_irq_save(flags);
412 LUB_IRQ_SET_CLR &= ~(1 << 0);
413 local_irq_restore(flags);
414
415 /* poll until mmc/sd card is removed */
416 if (LUB_IRQ_SET_CLR & (1 << 0))
417 mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
418 else {
419 (void) mmc_detect_int(LUBBOCK_SD_IRQ, (void *)data);
420 enable_irq(LUBBOCK_SD_IRQ);
421 }
422 }
423
424 static irqreturn_t lubbock_detect_int(int irq, void *data)
425 {
426 /* IRQ is level triggered; disable, and poll for removal */
427 disable_irq(irq);
428 mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
429
430 return mmc_detect_int(irq, data);
431 }
432
433 static int lubbock_mci_init(struct device *dev,
434 irq_handler_t detect_int,
435 void *data)
436 {
437 /* detect card insert/eject */
438 mmc_detect_int = detect_int;
439 init_timer(&mmc_timer);
440 mmc_timer.data = (unsigned long) data;
441 return request_irq(LUBBOCK_SD_IRQ, lubbock_detect_int,
442 IRQF_SAMPLE_RANDOM, "lubbock-sd-detect", data);
443 }
444
445 static int lubbock_mci_get_ro(struct device *dev)
446 {
447 return (LUB_MISC_RD & (1 << 2)) != 0;
448 }
449
450 static void lubbock_mci_exit(struct device *dev, void *data)
451 {
452 free_irq(LUBBOCK_SD_IRQ, data);
453 del_timer_sync(&mmc_timer);
454 }
455
456 static struct pxamci_platform_data lubbock_mci_platform_data = {
457 .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
458 .detect_delay = 1,
459 .init = lubbock_mci_init,
460 .get_ro = lubbock_mci_get_ro,
461 .exit = lubbock_mci_exit,
462 };
463
464 static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
465 {
466 unsigned long flags;
467
468 local_irq_save(flags);
469 if (mode & IR_SIRMODE) {
470 LUB_MISC_WR &= ~(1 << 4);
471 } else if (mode & IR_FIRMODE) {
472 LUB_MISC_WR |= 1 << 4;
473 }
474 local_irq_restore(flags);
475 }
476
477 static struct pxaficp_platform_data lubbock_ficp_platform_data = {
478 .transceiver_cap = IR_SIRMODE | IR_FIRMODE,
479 .transceiver_mode = lubbock_irda_transceiver_mode,
480 };
481
482 static void __init lubbock_init(void)
483 {
484 int flashboot = (LUB_CONF_SWITCHES & 1);
485
486 pxa2xx_mfp_config(ARRAY_AND_SIZE(lubbock_pin_config));
487
488 pxa_set_udc_info(&udc_info);
489 set_pxa_fb_info(&sharp_lm8v31);
490 pxa_set_mci_info(&lubbock_mci_platform_data);
491 pxa_set_ficp_info(&lubbock_ficp_platform_data);
492 pxa_set_ac97_info(NULL);
493
494 lubbock_flash_data[0].width = lubbock_flash_data[1].width =
495 (BOOT_DEF & 1) ? 2 : 4;
496 /* Compensate for the nROMBT switch which swaps the flash banks */
497 printk(KERN_NOTICE "Lubbock configured to boot from %s (bank %d)\n",
498 flashboot?"Flash":"ROM", flashboot);
499
500 lubbock_flash_data[flashboot^1].name = "application-flash";
501 lubbock_flash_data[flashboot].name = "boot-rom";
502 (void) platform_add_devices(devices, ARRAY_SIZE(devices));
503
504 spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
505 }
506
507 static struct map_desc lubbock_io_desc[] __initdata = {
508 { /* CPLD */
509 .virtual = LUBBOCK_FPGA_VIRT,
510 .pfn = __phys_to_pfn(LUBBOCK_FPGA_PHYS),
511 .length = 0x00100000,
512 .type = MT_DEVICE
513 }
514 };
515
516 static void __init lubbock_map_io(void)
517 {
518 pxa_map_io();
519 iotable_init(lubbock_io_desc, ARRAY_SIZE(lubbock_io_desc));
520
521 PCFR |= PCFR_OPDE;
522 }
523
524 MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
525 /* Maintainer: MontaVista Software Inc. */
526 .phys_io = 0x40000000,
527 .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
528 .map_io = lubbock_map_io,
529 .init_irq = lubbock_init_irq,
530 .timer = &pxa_timer,
531 .init_machine = lubbock_init,
532 MACHINE_END
This page took 0.057287 seconds and 6 git commands to generate.