Merge remote-tracking branch 'crypto-current/master'
[deliverable/linux.git] / arch / arm / mach-pxa / standby.S
1 /*
2 * PXA27x standby mode
3 *
4 * Author: David Burrage
5 *
6 * 2005 (c) MontaVista Software, Inc. This file is licensed under
7 * the terms of the GNU General Public License version 2. This program
8 * is licensed "as is" without any warranty of any kind, whether express
9 * or implied.
10 */
11
12 #include <linux/linkage.h>
13 #include <asm/assembler.h>
14 #include <mach/hardware.h>
15
16 #include <mach/pxa2xx-regs.h>
17
18 .text
19
20 #ifdef CONFIG_PXA27x
21 ENTRY(pxa_cpu_standby)
22 ldr r0, =PSSR
23 mov r1, #(PSSR_PH | PSSR_STS)
24 mov r2, #PWRMODE_STANDBY
25 mov r3, #UNCACHED_PHYS_0 @ Read mem context in.
26 ldr ip, [r3]
27 b 1f
28
29 .align 5
30 1: mcr p14, 0, r2, c7, c0, 0 @ put the system into Standby
31 str r1, [r0] @ make sure PSSR_PH/STS are clear
32 ret lr
33
34 #endif
35
36 #ifdef CONFIG_PXA3xx
37
38 #define PXA3_MDCNFG 0x0000
39 #define PXA3_MDCNFG_DMCEN (1 << 30)
40 #define PXA3_DDR_HCAL 0x0060
41 #define PXA3_DDR_HCAL_HCRNG 0x1f
42 #define PXA3_DDR_HCAL_HCPROG (1 << 28)
43 #define PXA3_DDR_HCAL_HCEN (1 << 31)
44 #define PXA3_DMCIER 0x0070
45 #define PXA3_DMCIER_EDLP (1 << 29)
46 #define PXA3_DMCISR 0x0078
47 #define PXA3_RCOMP 0x0100
48 #define PXA3_RCOMP_SWEVAL (1 << 31)
49
50 ENTRY(pm_enter_standby_start)
51 mov r1, #0xf6000000 @ DMEMC_REG_BASE (PXA3_MDCNFG)
52 add r1, r1, #0x00100000
53
54 /*
55 * Preload the TLB entry for accessing the dynamic memory
56 * controller registers. Note that page table lookups will
57 * fail until the dynamic memory controller has been
58 * reinitialised - and that includes MMU page table walks.
59 * This also means that only the dynamic memory controller
60 * can be reliably accessed in the code following standby.
61 */
62 ldr r2, [r1] @ Dummy read PXA3_MDCNFG
63
64 mcr p14, 0, r0, c7, c0, 0
65 .rept 8
66 nop
67 .endr
68
69 ldr r0, [r1, #PXA3_DDR_HCAL] @ Clear (and wait for) HCEN
70 bic r0, r0, #PXA3_DDR_HCAL_HCEN
71 str r0, [r1, #PXA3_DDR_HCAL]
72 1: ldr r0, [r1, #PXA3_DDR_HCAL]
73 tst r0, #PXA3_DDR_HCAL_HCEN
74 bne 1b
75
76 ldr r0, [r1, #PXA3_RCOMP] @ Initiate RCOMP
77 orr r0, r0, #PXA3_RCOMP_SWEVAL
78 str r0, [r1, #PXA3_RCOMP]
79
80 mov r0, #~0 @ Clear interrupts
81 str r0, [r1, #PXA3_DMCISR]
82
83 ldr r0, [r1, #PXA3_DMCIER] @ set DMIER[EDLP]
84 orr r0, r0, #PXA3_DMCIER_EDLP
85 str r0, [r1, #PXA3_DMCIER]
86
87 ldr r0, [r1, #PXA3_DDR_HCAL] @ clear HCRNG, set HCPROG, HCEN
88 bic r0, r0, #PXA3_DDR_HCAL_HCRNG
89 orr r0, r0, #PXA3_DDR_HCAL_HCEN | PXA3_DDR_HCAL_HCPROG
90 str r0, [r1, #PXA3_DDR_HCAL]
91
92 1: ldr r0, [r1, #PXA3_DMCISR]
93 tst r0, #PXA3_DMCIER_EDLP
94 beq 1b
95
96 ldr r0, [r1, #PXA3_MDCNFG] @ set PXA3_MDCNFG[DMCEN]
97 orr r0, r0, #PXA3_MDCNFG_DMCEN
98 str r0, [r1, #PXA3_MDCNFG]
99 1: ldr r0, [r1, #PXA3_MDCNFG]
100 tst r0, #PXA3_MDCNFG_DMCEN
101 beq 1b
102
103 ldr r0, [r1, #PXA3_DDR_HCAL] @ set PXA3_DDR_HCAL[HCRNG]
104 orr r0, r0, #2 @ HCRNG
105 str r0, [r1, #PXA3_DDR_HCAL]
106
107 ldr r0, [r1, #PXA3_DMCIER] @ Clear the interrupt
108 bic r0, r0, #0x20000000
109 str r0, [r1, #PXA3_DMCIER]
110
111 ret lr
112 ENTRY(pm_enter_standby_end)
113
114 #endif
This page took 0.075881 seconds and 5 git commands to generate.