arch/arm/mach-spear6xx/clock.c

   1 /*
   2  * arch/arm/mach-spear6xx/clock.c
   3  *
   4  * SPEAr6xx machines clock framework source file
   5  *
   6  * Copyright (C) 2009 ST Microelectronics
   7  * Viresh Kumar<viresh.kumar@st.com>
   8  *
   9  * This file is licensed under the terms of the GNU General Public
  10  * License version 2. This program is licensed "as is" without any
  11  * warranty of any kind, whether express or implied.
  12  */
  13
  14 #include <linux/init.h>
  15 #include <linux/kernel.h>
  16 #include <plat/clock.h>
  17 #include <mach/misc_regs.h>
  18
  19 /* root clks */
  20 /* 32 KHz oscillator clock */
  21 static struct clk osc_32k_clk = {
  22         .flags = ALWAYS_ENABLED,
  23         .rate = 32000,
  24 };
  25
  26 /* 30 MHz oscillator clock */
  27 static struct clk osc_30m_clk = {
  28         .flags = ALWAYS_ENABLED,
  29         .rate = 30000000,
  30 };
  31
  32 /* clock derived from 32 KHz osc clk */
  33 /* rtc clock */
  34 static struct clk rtc_clk = {
  35         .pclk = &osc_32k_clk,
  36         .en_reg = PERIP1_CLK_ENB,
  37         .en_reg_bit = RTC_CLK_ENB,
  38         .recalc = &follow_parent,
  39 };
  40
  41 /* clock derived from 30 MHz osc clk */
  42 /* pll masks structure */
  43 static struct pll_clk_masks pll1_masks = {
  44         .mode_mask = PLL_MODE_MASK,
  45         .mode_shift = PLL_MODE_SHIFT,
  46         .norm_fdbk_m_mask = PLL_NORM_FDBK_M_MASK,
  47         .norm_fdbk_m_shift = PLL_NORM_FDBK_M_SHIFT,
  48         .dith_fdbk_m_mask = PLL_DITH_FDBK_M_MASK,
  49         .dith_fdbk_m_shift = PLL_DITH_FDBK_M_SHIFT,
  50         .div_p_mask = PLL_DIV_P_MASK,
  51         .div_p_shift = PLL_DIV_P_SHIFT,
  52         .div_n_mask = PLL_DIV_N_MASK,
  53         .div_n_shift = PLL_DIV_N_SHIFT,
  54 };
  55
  56 /* pll1 configuration structure */
  57 static struct pll_clk_config pll1_config = {
  58         .mode_reg = PLL1_CTR,
  59         .cfg_reg = PLL1_FRQ,
  60         .masks = &pll1_masks,
  61 };
  62
  63 /* pll rate configuration table, in ascending order of rates */
  64 struct pll_rate_tbl pll_rtbl[] = {
  65         {.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* 266 MHz */
  66         {.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* 332 MHz */
  67 };
  68
  69 /* PLL1 clock */
  70 static struct clk pll1_clk = {
  71         .flags = ENABLED_ON_INIT,
  72         .pclk = &osc_30m_clk,
  73         .en_reg = PLL1_CTR,
  74         .en_reg_bit = PLL_ENABLE,
  75         .calc_rate = &pll_calc_rate,
  76         .recalc = &pll_clk_recalc,
  77         .set_rate = &pll_clk_set_rate,
  78         .rate_config = {pll_rtbl, ARRAY_SIZE(pll_rtbl), 1},
  79         .private_data = &pll1_config,
  80 };
  81
  82 /* PLL3 48 MHz clock */
  83 static struct clk pll3_48m_clk = {
  84         .flags = ALWAYS_ENABLED,
  85         .pclk = &osc_30m_clk,
  86         .rate = 48000000,
  87 };
  88
  89 /* watch dog timer clock */
  90 static struct clk wdt_clk = {
  91         .flags = ALWAYS_ENABLED,
  92         .pclk = &osc_30m_clk,
  93         .recalc = &follow_parent,
  94 };
  95
  96 /* clock derived from pll1 clk */
  97 /* cpu clock */
  98 static struct clk cpu_clk = {
  99         .flags = ALWAYS_ENABLED,
 100         .pclk = &pll1_clk,
 101         .recalc = &follow_parent,
 102 };
 103
 104 /* ahb masks structure */
 105 static struct bus_clk_masks ahb_masks = {
 106         .mask = PLL_HCLK_RATIO_MASK,
 107         .shift = PLL_HCLK_RATIO_SHIFT,
 108 };
 109
 110 /* ahb configuration structure */
 111 static struct bus_clk_config ahb_config = {
 112         .reg = CORE_CLK_CFG,
 113         .masks = &ahb_masks,
 114 };
 115
 116 /* ahb rate configuration table, in ascending order of rates */
 117 struct bus_rate_tbl bus_rtbl[] = {
 118         {.div = 3}, /* == parent divided by 4 */
 119         {.div = 2}, /* == parent divided by 3 */
 120         {.div = 1}, /* == parent divided by 2 */
 121         {.div = 0}, /* == parent divided by 1 */
 122 };
 123
 124 /* ahb clock */
 125 static struct clk ahb_clk = {
 126         .flags = ALWAYS_ENABLED,
 127         .pclk = &pll1_clk,
 128         .calc_rate = &bus_calc_rate,
 129         .recalc = &bus_clk_recalc,
 130         .set_rate = &bus_clk_set_rate,
 131         .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
 132         .private_data = &ahb_config,
 133 };
 134
 135 /* auxiliary synthesizers masks */
 136 static struct aux_clk_masks aux_masks = {
 137         .eq_sel_mask = AUX_EQ_SEL_MASK,
 138         .eq_sel_shift = AUX_EQ_SEL_SHIFT,
 139         .eq1_mask = AUX_EQ1_SEL,
 140         .eq2_mask = AUX_EQ2_SEL,
 141         .xscale_sel_mask = AUX_XSCALE_MASK,
 142         .xscale_sel_shift = AUX_XSCALE_SHIFT,
 143         .yscale_sel_mask = AUX_YSCALE_MASK,
 144         .yscale_sel_shift = AUX_YSCALE_SHIFT,
 145 };
 146
 147 /* uart configurations */
 148 static struct aux_clk_config uart_synth_config = {
 149         .synth_reg = UART_CLK_SYNT,
 150         .masks = &aux_masks,
 151 };
 152
 153 /* aux rate configuration table, in ascending order of rates */
 154 struct aux_rate_tbl aux_rtbl[] = {
 155         /* For PLL1 = 332 MHz */
 156         {.xscale = 1, .yscale = 8, .eq = 1}, /* 41.5 MHz */
 157         {.xscale = 1, .yscale = 4, .eq = 1}, /* 83 MHz */
 158         {.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
 159 };
 160
 161 /* uart synth clock */
 162 static struct clk uart_synth_clk = {
 163         .en_reg = UART_CLK_SYNT,
 164         .en_reg_bit = AUX_SYNT_ENB,
 165         .pclk = &pll1_clk,
 166         .calc_rate = &aux_calc_rate,
 167         .recalc = &aux_clk_recalc,
 168         .set_rate = &aux_clk_set_rate,
 169         .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
 170         .private_data = &uart_synth_config,
 171 };
 172
 173 /* uart parents */
 174 static struct pclk_info uart_pclk_info[] = {
 175         {
 176                 .pclk = &uart_synth_clk,
 177                 .pclk_val = AUX_CLK_PLL1_VAL,
 178         }, {
 179                 .pclk = &pll3_48m_clk,
 180                 .pclk_val = AUX_CLK_PLL3_VAL,
 181         },
 182 };
 183
 184 /* uart parent select structure */
 185 static struct pclk_sel uart_pclk_sel = {
 186         .pclk_info = uart_pclk_info,
 187         .pclk_count = ARRAY_SIZE(uart_pclk_info),
 188         .pclk_sel_reg = PERIP_CLK_CFG,
 189         .pclk_sel_mask = UART_CLK_MASK,
 190 };
 191
 192 /* uart0 clock */
 193 static struct clk uart0_clk = {
 194         .en_reg = PERIP1_CLK_ENB,
 195         .en_reg_bit = UART0_CLK_ENB,
 196         .pclk_sel = &uart_pclk_sel,
 197         .pclk_sel_shift = UART_CLK_SHIFT,
 198         .recalc = &follow_parent,
 199 };
 200
 201 /* uart1 clock */
 202 static struct clk uart1_clk = {
 203         .en_reg = PERIP1_CLK_ENB,
 204         .en_reg_bit = UART1_CLK_ENB,
 205         .pclk_sel = &uart_pclk_sel,
 206         .pclk_sel_shift = UART_CLK_SHIFT,
 207         .recalc = &follow_parent,
 208 };
 209
 210 /* firda configurations */
 211 static struct aux_clk_config firda_synth_config = {
 212         .synth_reg = FIRDA_CLK_SYNT,
 213         .masks = &aux_masks,
 214 };
 215
 216 /* firda synth clock */
 217 static struct clk firda_synth_clk = {
 218         .en_reg = FIRDA_CLK_SYNT,
 219         .en_reg_bit = AUX_SYNT_ENB,
 220         .pclk = &pll1_clk,
 221         .calc_rate = &aux_calc_rate,
 222         .recalc = &aux_clk_recalc,
 223         .set_rate = &aux_clk_set_rate,
 224         .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
 225         .private_data = &firda_synth_config,
 226 };
 227
 228 /* firda parents */
 229 static struct pclk_info firda_pclk_info[] = {
 230         {
 231                 .pclk = &firda_synth_clk,
 232                 .pclk_val = AUX_CLK_PLL1_VAL,
 233         }, {
 234                 .pclk = &pll3_48m_clk,
 235                 .pclk_val = AUX_CLK_PLL3_VAL,
 236         },
 237 };
 238
 239 /* firda parent select structure */
 240 static struct pclk_sel firda_pclk_sel = {
 241         .pclk_info = firda_pclk_info,
 242         .pclk_count = ARRAY_SIZE(firda_pclk_info),
 243         .pclk_sel_reg = PERIP_CLK_CFG,
 244         .pclk_sel_mask = FIRDA_CLK_MASK,
 245 };
 246
 247 /* firda clock */
 248 static struct clk firda_clk = {
 249         .en_reg = PERIP1_CLK_ENB,
 250         .en_reg_bit = FIRDA_CLK_ENB,
 251         .pclk_sel = &firda_pclk_sel,
 252         .pclk_sel_shift = FIRDA_CLK_SHIFT,
 253         .recalc = &follow_parent,
 254 };
 255
 256 /* clcd configurations */
 257 static struct aux_clk_config clcd_synth_config = {
 258         .synth_reg = CLCD_CLK_SYNT,
 259         .masks = &aux_masks,
 260 };
 261
 262 /* firda synth clock */
 263 static struct clk clcd_synth_clk = {
 264         .en_reg = CLCD_CLK_SYNT,
 265         .en_reg_bit = AUX_SYNT_ENB,
 266         .pclk = &pll1_clk,
 267         .calc_rate = &aux_calc_rate,
 268         .recalc = &aux_clk_recalc,
 269         .set_rate = &aux_clk_set_rate,
 270         .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
 271         .private_data = &clcd_synth_config,
 272 };
 273
 274 /* clcd parents */
 275 static struct pclk_info clcd_pclk_info[] = {
 276         {
 277                 .pclk = &clcd_synth_clk,
 278                 .pclk_val = AUX_CLK_PLL1_VAL,
 279         }, {
 280                 .pclk = &pll3_48m_clk,
 281                 .pclk_val = AUX_CLK_PLL3_VAL,
 282         },
 283 };
 284
 285 /* clcd parent select structure */
 286 static struct pclk_sel clcd_pclk_sel = {
 287         .pclk_info = clcd_pclk_info,
 288         .pclk_count = ARRAY_SIZE(clcd_pclk_info),
 289         .pclk_sel_reg = PERIP_CLK_CFG,
 290         .pclk_sel_mask = CLCD_CLK_MASK,
 291 };
 292
 293 /* clcd clock */
 294 static struct clk clcd_clk = {
 295         .en_reg = PERIP1_CLK_ENB,
 296         .en_reg_bit = CLCD_CLK_ENB,
 297         .pclk_sel = &clcd_pclk_sel,
 298         .pclk_sel_shift = CLCD_CLK_SHIFT,
 299         .recalc = &follow_parent,
 300 };
 301
 302 /* gpt synthesizer masks */
 303 static struct gpt_clk_masks gpt_masks = {
 304         .mscale_sel_mask = GPT_MSCALE_MASK,
 305         .mscale_sel_shift = GPT_MSCALE_SHIFT,
 306         .nscale_sel_mask = GPT_NSCALE_MASK,
 307         .nscale_sel_shift = GPT_NSCALE_SHIFT,
 308 };
 309
 310 /* gpt rate configuration table, in ascending order of rates */
 311 struct gpt_rate_tbl gpt_rtbl[] = {
 312         /* For pll1 = 332 MHz */
 313         {.mscale = 4, .nscale = 0}, /* 41.5 MHz */
 314         {.mscale = 2, .nscale = 0}, /* 55.3 MHz */
 315         {.mscale = 1, .nscale = 0}, /* 83 MHz */
 316 };
 317
 318 /* gpt0 synth clk config*/
 319 static struct gpt_clk_config gpt0_synth_config = {
 320         .synth_reg = PRSC1_CLK_CFG,
 321         .masks = &gpt_masks,
 322 };
 323
 324 /* gpt synth clock */
 325 static struct clk gpt0_synth_clk = {
 326         .flags = ALWAYS_ENABLED,
 327         .pclk = &pll1_clk,
 328         .calc_rate = &gpt_calc_rate,
 329         .recalc = &gpt_clk_recalc,
 330         .set_rate = &gpt_clk_set_rate,
 331         .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
 332         .private_data = &gpt0_synth_config,
 333 };
 334
 335 /* gpt parents */
 336 static struct pclk_info gpt0_pclk_info[] = {
 337         {
 338                 .pclk = &gpt0_synth_clk,
 339                 .pclk_val = AUX_CLK_PLL1_VAL,
 340         }, {
 341                 .pclk = &pll3_48m_clk,
 342                 .pclk_val = AUX_CLK_PLL3_VAL,
 343         },
 344 };
 345
 346 /* gpt parent select structure */
 347 static struct pclk_sel gpt0_pclk_sel = {
 348         .pclk_info = gpt0_pclk_info,
 349         .pclk_count = ARRAY_SIZE(gpt0_pclk_info),
 350         .pclk_sel_reg = PERIP_CLK_CFG,
 351         .pclk_sel_mask = GPT_CLK_MASK,
 352 };
 353
 354 /* gpt0 ARM1 subsystem timer clock */
 355 static struct clk gpt0_clk = {
 356         .flags = ALWAYS_ENABLED,
 357         .pclk_sel = &gpt0_pclk_sel,
 358         .pclk_sel_shift = GPT0_CLK_SHIFT,
 359         .recalc = &follow_parent,
 360 };
 361
 362
 363 /* Note: gpt0 and gpt1 share same parent clocks */
 364 /* gpt parent select structure */
 365 static struct pclk_sel gpt1_pclk_sel = {
 366         .pclk_info = gpt0_pclk_info,
 367         .pclk_count = ARRAY_SIZE(gpt0_pclk_info),
 368         .pclk_sel_reg = PERIP_CLK_CFG,
 369         .pclk_sel_mask = GPT_CLK_MASK,
 370 };
 371
 372 /* gpt1 timer clock */
 373 static struct clk gpt1_clk = {
 374         .flags = ALWAYS_ENABLED,
 375         .pclk_sel = &gpt1_pclk_sel,
 376         .pclk_sel_shift = GPT1_CLK_SHIFT,
 377         .recalc = &follow_parent,
 378 };
 379
 380 /* gpt2 synth clk config*/
 381 static struct gpt_clk_config gpt2_synth_config = {
 382         .synth_reg = PRSC2_CLK_CFG,
 383         .masks = &gpt_masks,
 384 };
 385
 386 /* gpt synth clock */
 387 static struct clk gpt2_synth_clk = {
 388         .flags = ALWAYS_ENABLED,
 389         .pclk = &pll1_clk,
 390         .calc_rate = &gpt_calc_rate,
 391         .recalc = &gpt_clk_recalc,
 392         .set_rate = &gpt_clk_set_rate,
 393         .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
 394         .private_data = &gpt2_synth_config,
 395 };
 396
 397 /* gpt parents */
 398 static struct pclk_info gpt2_pclk_info[] = {
 399         {
 400                 .pclk = &gpt2_synth_clk,
 401                 .pclk_val = AUX_CLK_PLL1_VAL,
 402         }, {
 403                 .pclk = &pll3_48m_clk,
 404                 .pclk_val = AUX_CLK_PLL3_VAL,
 405         },
 406 };
 407
 408 /* gpt parent select structure */
 409 static struct pclk_sel gpt2_pclk_sel = {
 410         .pclk_info = gpt2_pclk_info,
 411         .pclk_count = ARRAY_SIZE(gpt2_pclk_info),
 412         .pclk_sel_reg = PERIP_CLK_CFG,
 413         .pclk_sel_mask = GPT_CLK_MASK,
 414 };
 415
 416 /* gpt2 timer clock */
 417 static struct clk gpt2_clk = {
 418         .flags = ALWAYS_ENABLED,
 419         .pclk_sel = &gpt2_pclk_sel,
 420         .pclk_sel_shift = GPT2_CLK_SHIFT,
 421         .recalc = &follow_parent,
 422 };
 423
 424 /* gpt3 synth clk config*/
 425 static struct gpt_clk_config gpt3_synth_config = {
 426         .synth_reg = PRSC3_CLK_CFG,
 427         .masks = &gpt_masks,
 428 };
 429
 430 /* gpt synth clock */
 431 static struct clk gpt3_synth_clk = {
 432         .flags = ALWAYS_ENABLED,
 433         .pclk = &pll1_clk,
 434         .calc_rate = &gpt_calc_rate,
 435         .recalc = &gpt_clk_recalc,
 436         .set_rate = &gpt_clk_set_rate,
 437         .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
 438         .private_data = &gpt3_synth_config,
 439 };
 440
 441 /* gpt parents */
 442 static struct pclk_info gpt3_pclk_info[] = {
 443         {
 444                 .pclk = &gpt3_synth_clk,
 445                 .pclk_val = AUX_CLK_PLL1_VAL,
 446         }, {
 447                 .pclk = &pll3_48m_clk,
 448                 .pclk_val = AUX_CLK_PLL3_VAL,
 449         },
 450 };
 451
 452 /* gpt parent select structure */
 453 static struct pclk_sel gpt3_pclk_sel = {
 454         .pclk_info = gpt3_pclk_info,
 455         .pclk_count = ARRAY_SIZE(gpt3_pclk_info),
 456         .pclk_sel_reg = PERIP_CLK_CFG,
 457         .pclk_sel_mask = GPT_CLK_MASK,
 458 };
 459
 460 /* gpt3 timer clock */
 461 static struct clk gpt3_clk = {
 462         .flags = ALWAYS_ENABLED,
 463         .pclk_sel = &gpt3_pclk_sel,
 464         .pclk_sel_shift = GPT3_CLK_SHIFT,
 465         .recalc = &follow_parent,
 466 };
 467
 468 /* clock derived from pll3 clk */
 469 /* usbh0 clock */
 470 static struct clk usbh0_clk = {
 471         .pclk = &pll3_48m_clk,
 472         .en_reg = PERIP1_CLK_ENB,
 473         .en_reg_bit = USBH0_CLK_ENB,
 474         .recalc = &follow_parent,
 475 };
 476
 477 /* usbh1 clock */
 478 static struct clk usbh1_clk = {
 479         .pclk = &pll3_48m_clk,
 480         .en_reg = PERIP1_CLK_ENB,
 481         .en_reg_bit = USBH1_CLK_ENB,
 482         .recalc = &follow_parent,
 483 };
 484
 485 /* usbd clock */
 486 static struct clk usbd_clk = {
 487         .pclk = &pll3_48m_clk,
 488         .en_reg = PERIP1_CLK_ENB,
 489         .en_reg_bit = USBD_CLK_ENB,
 490         .recalc = &follow_parent,
 491 };
 492
 493 /* clock derived from ahb clk */
 494 /* apb masks structure */
 495 static struct bus_clk_masks apb_masks = {
 496         .mask = HCLK_PCLK_RATIO_MASK,
 497         .shift = HCLK_PCLK_RATIO_SHIFT,
 498 };
 499
 500 /* apb configuration structure */
 501 static struct bus_clk_config apb_config = {
 502         .reg = CORE_CLK_CFG,
 503         .masks = &apb_masks,
 504 };
 505
 506 /* apb clock */
 507 static struct clk apb_clk = {
 508         .flags = ALWAYS_ENABLED,
 509         .pclk = &ahb_clk,
 510         .calc_rate = &bus_calc_rate,
 511         .recalc = &bus_clk_recalc,
 512         .set_rate = &bus_clk_set_rate,
 513         .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
 514         .private_data = &apb_config,
 515 };
 516
 517 /* i2c clock */
 518 static struct clk i2c_clk = {
 519         .pclk = &ahb_clk,
 520         .en_reg = PERIP1_CLK_ENB,
 521         .en_reg_bit = I2C_CLK_ENB,
 522         .recalc = &follow_parent,
 523 };
 524
 525 /* dma clock */
 526 static struct clk dma_clk = {
 527         .pclk = &ahb_clk,
 528         .en_reg = PERIP1_CLK_ENB,
 529         .en_reg_bit = DMA_CLK_ENB,
 530         .recalc = &follow_parent,
 531 };
 532
 533 /* jpeg clock */
 534 static struct clk jpeg_clk = {
 535         .pclk = &ahb_clk,
 536         .en_reg = PERIP1_CLK_ENB,
 537         .en_reg_bit = JPEG_CLK_ENB,
 538         .recalc = &follow_parent,
 539 };
 540
 541 /* gmac clock */
 542 static struct clk gmac_clk = {
 543         .pclk = &ahb_clk,
 544         .en_reg = PERIP1_CLK_ENB,
 545         .en_reg_bit = GMAC_CLK_ENB,
 546         .recalc = &follow_parent,
 547 };
 548
 549 /* smi clock */
 550 static struct clk smi_clk = {
 551         .pclk = &ahb_clk,
 552         .en_reg = PERIP1_CLK_ENB,
 553         .en_reg_bit = SMI_CLK_ENB,
 554         .recalc = &follow_parent,
 555 };
 556
 557 /* fsmc clock */
 558 static struct clk fsmc_clk = {
 559         .pclk = &ahb_clk,
 560         .en_reg = PERIP1_CLK_ENB,
 561         .en_reg_bit = FSMC_CLK_ENB,
 562         .recalc = &follow_parent,
 563 };
 564
 565 /* clock derived from apb clk */
 566 /* adc clock */
 567 static struct clk adc_clk = {
 568         .pclk = &apb_clk,
 569         .en_reg = PERIP1_CLK_ENB,
 570         .en_reg_bit = ADC_CLK_ENB,
 571         .recalc = &follow_parent,
 572 };
 573
 574 /* ssp0 clock */
 575 static struct clk ssp0_clk = {
 576         .pclk = &apb_clk,
 577         .en_reg = PERIP1_CLK_ENB,
 578         .en_reg_bit = SSP0_CLK_ENB,
 579         .recalc = &follow_parent,
 580 };
 581
 582 /* ssp1 clock */
 583 static struct clk ssp1_clk = {
 584         .pclk = &apb_clk,
 585         .en_reg = PERIP1_CLK_ENB,
 586         .en_reg_bit = SSP1_CLK_ENB,
 587         .recalc = &follow_parent,
 588 };
 589
 590 /* ssp2 clock */
 591 static struct clk ssp2_clk = {
 592         .pclk = &apb_clk,
 593         .en_reg = PERIP1_CLK_ENB,
 594         .en_reg_bit = SSP2_CLK_ENB,
 595         .recalc = &follow_parent,
 596 };
 597
 598 /* gpio0 ARM subsystem clock */
 599 static struct clk gpio0_clk = {
 600         .flags = ALWAYS_ENABLED,
 601         .pclk = &apb_clk,
 602         .recalc = &follow_parent,
 603 };
 604
 605 /* gpio1 clock */
 606 static struct clk gpio1_clk = {
 607         .pclk = &apb_clk,
 608         .en_reg = PERIP1_CLK_ENB,
 609         .en_reg_bit = GPIO1_CLK_ENB,
 610         .recalc = &follow_parent,
 611 };
 612
 613 /* gpio2 clock */
 614 static struct clk gpio2_clk = {
 615         .pclk = &apb_clk,
 616         .en_reg = PERIP1_CLK_ENB,
 617         .en_reg_bit = GPIO2_CLK_ENB,
 618         .recalc = &follow_parent,
 619 };
 620
 621 static struct clk dummy_apb_pclk;
 622
 623 /* array of all spear 6xx clock lookups */
 624 static struct clk_lookup spear_clk_lookups[] = {
 625         { .con_id = "apb_pclk",         .clk = &dummy_apb_pclk},
 626         /* root clks */
 627         { .con_id = "osc_32k_clk",      .clk = &osc_32k_clk},
 628         { .con_id = "osc_30m_clk",      .clk = &osc_30m_clk},
 629         /* clock derived from 32 KHz os          clk */
 630         { .dev_id = "rtc-spear",        .clk = &rtc_clk},
 631         /* clock derived from 30 MHz os          clk */
 632         { .con_id = "pll1_clk",         .clk = &pll1_clk},
 633         { .con_id = "pll3_48m_clk",     .clk = &pll3_48m_clk},
 634         { .dev_id = "wdt",              .clk = &wdt_clk},
 635         /* clock derived from pll1 clk */
 636         { .con_id = "cpu_clk",          .clk = &cpu_clk},
 637         { .con_id = "ahb_clk",          .clk = &ahb_clk},
 638         { .con_id = "uart_synth_clk",   .clk = &uart_synth_clk},
 639         { .con_id = "firda_synth_clk",  .clk = &firda_synth_clk},
 640         { .con_id = "clcd_synth_clk",   .clk = &clcd_synth_clk},
 641         { .con_id = "gpt0_synth_clk",   .clk = &gpt0_synth_clk},
 642         { .con_id = "gpt2_synth_clk",   .clk = &gpt2_synth_clk},
 643         { .con_id = "gpt3_synth_clk",   .clk = &gpt3_synth_clk},
 644         { .dev_id = "d0000000.serial",  .clk = &uart0_clk},
 645         { .dev_id = "d0080000.serial",  .clk = &uart1_clk},
 646         { .dev_id = "firda",            .clk = &firda_clk},
 647         { .dev_id = "clcd",             .clk = &clcd_clk},
 648         { .dev_id = "gpt0",             .clk = &gpt0_clk},
 649         { .dev_id = "gpt1",             .clk = &gpt1_clk},
 650         { .dev_id = "gpt2",             .clk = &gpt2_clk},
 651         { .dev_id = "gpt3",             .clk = &gpt3_clk},
 652         /* clock derived from pll3 clk */
 653         { .dev_id = "designware_udc",   .clk = &usbd_clk},
 654         { .con_id = "usbh.0_clk",       .clk = &usbh0_clk},
 655         { .con_id = "usbh.1_clk",       .clk = &usbh1_clk},
 656         /* clock derived from ahb clk */
 657         { .con_id = "apb_clk",          .clk = &apb_clk},
 658         { .dev_id = "d0200000.i2c",     .clk = &i2c_clk},
 659         { .dev_id = "dma",              .clk = &dma_clk},
 660         { .dev_id = "jpeg",             .clk = &jpeg_clk},
 661         { .dev_id = "gmac",             .clk = &gmac_clk},
 662         { .dev_id = "smi",              .clk = &smi_clk},
 663         { .dev_id = "fsmc-nand",        .clk = &fsmc_clk},
 664         /* clock derived from apb clk */
 665         { .dev_id = "adc",              .clk = &adc_clk},
 666         { .dev_id = "ssp-pl022.0",      .clk = &ssp0_clk},
 667         { .dev_id = "ssp-pl022.1",      .clk = &ssp1_clk},
 668         { .dev_id = "ssp-pl022.2",      .clk = &ssp2_clk},
 669         { .dev_id = "f0100000.gpio",    .clk = &gpio0_clk},
 670         { .dev_id = "fc980000.gpio",    .clk = &gpio1_clk},
 671         { .dev_id = "d8100000.gpio",    .clk = &gpio2_clk},
 672 };
 673
 674 void __init spear6xx_clk_init(void)
 675 {
 676         int i;
 677
 678         for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
 679                 clk_register(&spear_clk_lookups[i]);
 680
 681         clk_init();
 682 }