arch/arm/mach-u300/clock.c

   1 /*
   2  *
   3  * arch/arm/mach-u300/clock.c
   4  *
   5  *
   6  * Copyright (C) 2007-2009 ST-Ericsson AB
   7  * License terms: GNU General Public License (GPL) version 2
   8  * Define clocks in the app platform.
   9  * Author: Linus Walleij <linus.walleij@stericsson.com>
  10  * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
  11  *
  12  */
  13 #include <linux/module.h>
  14 #include <linux/kernel.h>
  15 #include <linux/list.h>
  16 #include <linux/errno.h>
  17 #include <linux/err.h>
  18 #include <linux/string.h>
  19 #include <linux/clk.h>
  20 #include <linux/mutex.h>
  21 #include <linux/spinlock.h>
  22 #include <linux/debugfs.h>
  23 #include <linux/device.h>
  24 #include <linux/init.h>
  25 #include <linux/timer.h>
  26 #include <linux/io.h>
  27 #include <linux/seq_file.h>
  28
  29 #include <asm/clkdev.h>
  30 #include <mach/hardware.h>
  31 #include <mach/syscon.h>
  32
  33 #include "clock.h"
  34
  35 /*
  36  * TODO:
  37  * - move all handling of the CCR register into this file and create
  38  *   a spinlock for the CCR register
  39  * - switch to the clkdevice lookup mechanism that maps clocks to
  40  *   device ID:s instead when it becomes available in kernel 2.6.29.
  41  * - implement rate get/set for all clocks that need it.
  42  */
  43
  44 /*
  45  * Syscon clock I/O registers lock so clock requests don't collide
  46  * NOTE: this is a local lock only used to lock access to clock and
  47  * reset registers in syscon.
  48  */
  49 static DEFINE_SPINLOCK(syscon_clkreg_lock);
  50 static DEFINE_SPINLOCK(syscon_resetreg_lock);
  51
  52 /*
  53  * The clocking hierarchy currently looks like this.
  54  * NOTE: the idea is NOT to show how the clocks are routed on the chip!
  55  * The ideas is to show dependencies, so a clock higher up in the
  56  * hierarchy has to be on in order for another clock to be on. Now,
  57  * both CPU and DMA can actually be on top of the hierarchy, and that
  58  * is not modeled currently. Instead we have the backbone AMBA bus on
  59  * top. This bus cannot be programmed in any way but conceptually it
  60  * needs to be active for the bridges and devices to transport data.
  61  *
  62  * Please be aware that a few clocks are hw controlled, which mean that
  63  * the hw itself can turn on/off or change the rate of the clock when
  64  * needed!
  65  *
  66  *  AMBA bus
  67  *  |
  68  *  +- CPU
  69  *  +- NANDIF NAND Flash interface
  70  *  +- SEMI Shared Memory interface
  71  *  +- ISP Image Signal Processor (U335 only)
  72  *  +- CDS (U335 only)
  73  *  +- DMA Direct Memory Access Controller
  74  *  +- AAIF APP/ACC Inteface (Mobile Scalable Link, MSL)
  75  *  +- APEX
  76  *  +- VIDEO_ENC AVE2/3 Video Encoder
  77  *  +- XGAM Graphics Accelerator Controller
  78  *  +- AHB
  79  *  |
  80  *  +- ahb:0 AHB Bridge
  81  *  |  |
  82  *  |  +- ahb:1 INTCON Interrupt controller
  83  *  |  +- ahb:3 MSPRO  Memory Stick Pro controller
  84  *  |  +- ahb:4 EMIF   External Memory interface
  85  *  |
  86  *  +- fast:0 FAST bridge
  87  *  |  |
  88  *  |  +- fast:1 MMCSD MMC/SD card reader controller
  89  *  |  +- fast:2 I2S0  PCM I2S channel 0 controller
  90  *  |  +- fast:3 I2S1  PCM I2S channel 1 controller
  91  *  |  +- fast:4 I2C0  I2C channel 0 controller
  92  *  |  +- fast:5 I2C1  I2C channel 1 controller
  93  *  |  +- fast:6 SPI   SPI controller
  94  *  |  +- fast:7 UART1 Secondary UART (U335 only)
  95  *  |
  96  *  +- slow:0 SLOW bridge
  97  *     |
  98  *     +- slow:1 SYSCON (not possible to control)
  99  *     +- slow:2 WDOG Watchdog
 100  *     +- slow:3 UART0 primary UART
 101  *     +- slow:4 TIMER_APP Application timer - used in Linux
 102  *     +- slow:5 KEYPAD controller
 103  *     +- slow:6 GPIO controller
 104  *     +- slow:7 RTC controller
 105  *     +- slow:8 BT Bus Tracer (not used currently)
 106  *     +- slow:9 EH Event Handler (not used currently)
 107  *     +- slow:a TIMER_ACC Access style timer (not used currently)
 108  *     +- slow:b PPM (U335 only, what is that?)
 109  */
 110
 111 /*
 112  * Reset control functions. We remember if a block has been
 113  * taken out of reset and don't remove the reset assertion again
 114  * and vice versa. Currently we only remove resets so the
 115  * enablement function is defined out.
 116  */
 117 static void syscon_block_reset_enable(struct clk *clk)
 118 {
 119         u16 val;
 120         unsigned long iflags;
 121
 122         /* Not all blocks support resetting */
 123         if (!clk->res_reg || !clk->res_mask)
 124                 return;
 125         spin_lock_irqsave(&syscon_resetreg_lock, iflags);
 126         val = readw(clk->res_reg);
 127         val |= clk->res_mask;
 128         writew(val, clk->res_reg);
 129         spin_unlock_irqrestore(&syscon_resetreg_lock, iflags);
 130         clk->reset = true;
 131 }
 132
 133 static void syscon_block_reset_disable(struct clk *clk)
 134 {
 135         u16 val;
 136         unsigned long iflags;
 137
 138         /* Not all blocks support resetting */
 139         if (!clk->res_reg || !clk->res_mask)
 140                 return;
 141         spin_lock_irqsave(&syscon_resetreg_lock, iflags);
 142         val = readw(clk->res_reg);
 143         val &= ~clk->res_mask;
 144         writew(val, clk->res_reg);
 145         spin_unlock_irqrestore(&syscon_resetreg_lock, iflags);
 146         clk->reset = false;
 147 }
 148
 149 int __clk_get(struct clk *clk)
 150 {
 151         u16 val;
 152
 153         /* The MMC and MSPRO clocks need some special set-up */
 154         if (!strcmp(clk->name, "MCLK")) {
 155                 /* Set default MMC clock divisor to 18.9 MHz */
 156                 writew(0x0054U, U300_SYSCON_VBASE + U300_SYSCON_MMF0R);
 157                 val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMCR);
 158                 /* Disable the MMC feedback clock */
 159                 val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE;
 160                 /* Disable MSPRO frequency */
 161                 val &= ~U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE;
 162                 writew(val, U300_SYSCON_VBASE + U300_SYSCON_MMCR);
 163         }
 164         if (!strcmp(clk->name, "MSPRO")) {
 165                 val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMCR);
 166                 /* Disable the MMC feedback clock */
 167                 val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE;
 168                 /* Enable MSPRO frequency */
 169                 val |= U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE;
 170                 writew(val, U300_SYSCON_VBASE + U300_SYSCON_MMCR);
 171         }
 172         return 1;
 173 }
 174 EXPORT_SYMBOL(__clk_get);
 175
 176 void __clk_put(struct clk *clk)
 177 {
 178 }
 179 EXPORT_SYMBOL(__clk_put);
 180
 181 static void syscon_clk_disable(struct clk *clk)
 182 {
 183         unsigned long iflags;
 184
 185         /* Don't touch the hardware controlled clocks */
 186         if (clk->hw_ctrld)
 187                 return;
 188
 189         spin_lock_irqsave(&syscon_clkreg_lock, iflags);
 190         writew(clk->clk_val, U300_SYSCON_VBASE + U300_SYSCON_SBCDR);
 191         spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
 192 }
 193
 194 static void syscon_clk_enable(struct clk *clk)
 195 {
 196         unsigned long iflags;
 197
 198         /* Don't touch the hardware controlled clocks */
 199         if (clk->hw_ctrld)
 200                 return;
 201
 202         spin_lock_irqsave(&syscon_clkreg_lock, iflags);
 203         writew(clk->clk_val, U300_SYSCON_VBASE + U300_SYSCON_SBCER);
 204         spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
 205 }
 206
 207 static u16 syscon_clk_get_rate(void)
 208 {
 209         u16 val;
 210         unsigned long iflags;
 211
 212         spin_lock_irqsave(&syscon_clkreg_lock, iflags);
 213         val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
 214         val &= U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
 215         spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
 216         return val;
 217 }
 218
 219 #ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
 220 static void enable_i2s0_vcxo(void)
 221 {
 222         u16 val;
 223         unsigned long iflags;
 224
 225         spin_lock_irqsave(&syscon_clkreg_lock, iflags);
 226         /* Set I2S0 to use the VCXO 26 MHz clock */
 227         val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
 228         val |= U300_SYSCON_CCR_TURN_VCXO_ON;
 229         writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
 230         val |= U300_SYSCON_CCR_I2S0_USE_VCXO;
 231         writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
 232         val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
 233         val |= U300_SYSCON_CEFR_I2S0_CLK_EN;
 234         writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
 235         spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
 236 }
 237
 238 static void enable_i2s1_vcxo(void)
 239 {
 240         u16 val;
 241         unsigned long iflags;
 242
 243         spin_lock_irqsave(&syscon_clkreg_lock, iflags);
 244         /* Set I2S1 to use the VCXO 26 MHz clock */
 245         val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
 246         val |= U300_SYSCON_CCR_TURN_VCXO_ON;
 247         writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
 248         val |= U300_SYSCON_CCR_I2S1_USE_VCXO;
 249         writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
 250         val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
 251         val |= U300_SYSCON_CEFR_I2S1_CLK_EN;
 252         writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
 253         spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
 254 }
 255
 256 static void disable_i2s0_vcxo(void)
 257 {
 258         u16 val;
 259         unsigned long iflags;
 260
 261         spin_lock_irqsave(&syscon_clkreg_lock, iflags);
 262         /* Disable I2S0 use of the VCXO 26 MHz clock */
 263         val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
 264         val &= ~U300_SYSCON_CCR_I2S0_USE_VCXO;
 265         writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
 266         /* Deactivate VCXO if noone else is using VCXO */
 267         if (!(val & U300_SYSCON_CCR_I2S1_USE_VCXO))
 268                 val &= ~U300_SYSCON_CCR_TURN_VCXO_ON;
 269         writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
 270         val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
 271         val &= ~U300_SYSCON_CEFR_I2S0_CLK_EN;
 272         writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
 273         spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
 274 }
 275
 276 static void disable_i2s1_vcxo(void)
 277 {
 278         u16 val;
 279         unsigned long iflags;
 280
 281         spin_lock_irqsave(&syscon_clkreg_lock, iflags);
 282         /* Disable I2S1 use of the VCXO 26 MHz clock */
 283         val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
 284         val &= ~U300_SYSCON_CCR_I2S1_USE_VCXO;
 285         writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
 286         /* Deactivate VCXO if noone else is using VCXO */
 287         if (!(val & U300_SYSCON_CCR_I2S0_USE_VCXO))
 288                 val &= ~U300_SYSCON_CCR_TURN_VCXO_ON;
 289         writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
 290         val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
 291         val &= ~U300_SYSCON_CEFR_I2S0_CLK_EN;
 292         writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
 293         spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
 294 }
 295 #endif /* CONFIG_MACH_U300_USE_I2S_AS_MASTER */
 296
 297
 298 static void syscon_clk_rate_set_mclk(unsigned long rate)
 299 {
 300         u16 val;
 301         u32 reg;
 302         unsigned long iflags;
 303
 304         switch (rate) {
 305         case 18900000:
 306                 val = 0x0054;
 307                 break;
 308         case 20800000:
 309                 val = 0x0044;
 310                 break;
 311         case 23100000:
 312                 val = 0x0043;
 313                 break;
 314         case 26000000:
 315                 val = 0x0033;
 316                 break;
 317         case 29700000:
 318                 val = 0x0032;
 319                 break;
 320         case 34700000:
 321                 val = 0x0022;
 322                 break;
 323         case 41600000:
 324                 val = 0x0021;
 325                 break;
 326         case 52000000:
 327                 val = 0x0011;
 328                 break;
 329         case 104000000:
 330                 val = 0x0000;
 331                 break;
 332         default:
 333                 printk(KERN_ERR "Trying to set MCLK to unknown speed! %ld\n",
 334                        rate);
 335                 return;
 336         }
 337
 338         spin_lock_irqsave(&syscon_clkreg_lock, iflags);
 339         reg = readw(U300_SYSCON_VBASE + U300_SYSCON_MMF0R) &
 340                 ~U300_SYSCON_MMF0R_MASK;
 341         writew(reg | val, U300_SYSCON_VBASE + U300_SYSCON_MMF0R);
 342         spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
 343 }
 344
 345 void syscon_clk_rate_set_cpuclk(unsigned long rate)
 346 {
 347         u16 val;
 348         unsigned long iflags;
 349
 350         switch (rate) {
 351         case 13000000:
 352                 val = U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER;
 353                 break;
 354         case 52000000:
 355                 val = U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE;
 356                 break;
 357         case 104000000:
 358                 val = U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH;
 359                 break;
 360         case 208000000:
 361                 val = U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST;
 362                 break;
 363         default:
 364                 return;
 365         }
 366         spin_lock_irqsave(&syscon_clkreg_lock, iflags);
 367         val |= readw(U300_SYSCON_VBASE + U300_SYSCON_CCR) &
 368                 ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK ;
 369         writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
 370         spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
 371 }
 372 EXPORT_SYMBOL(syscon_clk_rate_set_cpuclk);
 373
 374 void clk_disable(struct clk *clk)
 375 {
 376         unsigned long iflags;
 377
 378         spin_lock_irqsave(&clk->lock, iflags);
 379         if (clk->usecount > 0 && !(--clk->usecount)) {
 380                 /* some blocks lack clocking registers and cannot be disabled */
 381                 if (clk->disable)
 382                         clk->disable(clk);
 383                 if (likely((u32)clk->parent))
 384                         clk_disable(clk->parent);
 385         }
 386 #ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
 387         if (unlikely(!strcmp(clk->name, "I2S0")))
 388                 disable_i2s0_vcxo();
 389         if (unlikely(!strcmp(clk->name, "I2S1")))
 390                 disable_i2s1_vcxo();
 391 #endif
 392         spin_unlock_irqrestore(&clk->lock, iflags);
 393 }
 394 EXPORT_SYMBOL(clk_disable);
 395
 396 int clk_enable(struct clk *clk)
 397 {
 398         int ret = 0;
 399         unsigned long iflags;
 400
 401         spin_lock_irqsave(&clk->lock, iflags);
 402         if (clk->usecount++ == 0) {
 403                 if (likely((u32)clk->parent))
 404                         ret = clk_enable(clk->parent);
 405
 406                 if (unlikely(ret != 0))
 407                         clk->usecount--;
 408                 else {
 409                         /* remove reset line (we never enable reset again) */
 410                         syscon_block_reset_disable(clk);
 411                         /* clocks without enable function are always on */
 412                         if (clk->enable)
 413                                 clk->enable(clk);
 414 #ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
 415                         if (unlikely(!strcmp(clk->name, "I2S0")))
 416                                 enable_i2s0_vcxo();
 417                         if (unlikely(!strcmp(clk->name, "I2S1")))
 418                                 enable_i2s1_vcxo();
 419 #endif
 420                 }
 421         }
 422         spin_unlock_irqrestore(&clk->lock, iflags);
 423         return ret;
 424
 425 }
 426 EXPORT_SYMBOL(clk_enable);
 427
 428 /* Returns the clock rate in Hz */
 429 static unsigned long clk_get_rate_cpuclk(struct clk *clk)
 430 {
 431         u16 val;
 432
 433         val = syscon_clk_get_rate();
 434
 435         switch (val) {
 436         case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
 437         case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
 438                 return 13000000;
 439         case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
 440                 return 52000000;
 441         case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
 442                 return 104000000;
 443         case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
 444                 return 208000000;
 445         default:
 446                 break;
 447         }
 448         return clk->rate;
 449 }
 450
 451 static unsigned long clk_get_rate_ahb_clk(struct clk *clk)
 452 {
 453         u16 val;
 454
 455         val = syscon_clk_get_rate();
 456
 457         switch (val) {
 458         case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
 459         case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
 460                 return 6500000;
 461         case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
 462                 return 26000000;
 463         case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
 464         case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
 465                 return 52000000;
 466         default:
 467                 break;
 468         }
 469         return clk->rate;
 470
 471 }
 472
 473 static unsigned long clk_get_rate_emif_clk(struct clk *clk)
 474 {
 475         u16 val;
 476
 477         val = syscon_clk_get_rate();
 478
 479         switch (val) {
 480         case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
 481         case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
 482                 return 13000000;
 483         case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
 484                 return 52000000;
 485         case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
 486         case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
 487                 return 104000000;
 488         default:
 489                 break;
 490         }
 491         return clk->rate;
 492
 493 }
 494
 495 static unsigned long clk_get_rate_xgamclk(struct clk *clk)
 496 {
 497         u16 val;
 498
 499         val = syscon_clk_get_rate();
 500
 501         switch (val) {
 502         case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
 503         case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
 504                 return 6500000;
 505         case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
 506                 return 26000000;
 507         case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
 508         case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
 509                 return 52000000;
 510         default:
 511                 break;
 512         }
 513
 514         return clk->rate;
 515 }
 516
 517 static unsigned long clk_get_rate_mclk(struct clk *clk)
 518 {
 519         u16 val;
 520
 521         val = syscon_clk_get_rate();
 522
 523         switch (val) {
 524         case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
 525                 /*
 526                  * Here, the 208 MHz PLL gets shut down and the always
 527                  * on 13 MHz PLL used for RTC etc kicks into use
 528                  * instead.
 529                  */
 530                 return 13000000;
 531         case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
 532         case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
 533         case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
 534         case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
 535         {
 536                 /*
 537                  * This clock is under program control. The register is
 538                  * divided in two nybbles, bit 7-4 gives cycles-1 to count
 539                  * high, bit 3-0 gives cycles-1 to count low. Distribute
 540                  * these with no more than 1 cycle difference between
 541                  * low and high and add low and high to get the actual
 542                  * divisor. The base PLL is 208 MHz. Writing 0x00 will
 543                  * divide by 1 and 1 so the highest frequency possible
 544                  * is 104 MHz.
 545                  *
 546                  * e.g. 0x54 =>
 547                  * f = 208 / ((5+1) + (4+1)) = 208 / 11 = 18.9 MHz
 548                  */
 549                 u16 val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMF0R) &
 550                         U300_SYSCON_MMF0R_MASK;
 551                 switch (val) {
 552                 case 0x0054:
 553                         return 18900000;
 554                 case 0x0044:
 555                         return 20800000;
 556                 case 0x0043:
 557                         return 23100000;
 558                 case 0x0033:
 559                         return 26000000;
 560                 case 0x0032:
 561                         return 29700000;
 562                 case 0x0022:
 563                         return 34700000;
 564                 case 0x0021:
 565                         return 41600000;
 566                 case 0x0011:
 567                         return 52000000;
 568                 case 0x0000:
 569                         return 104000000;
 570                 default:
 571                         break;
 572                 }
 573         }
 574         default:
 575                 break;
 576         }
 577
 578         return clk->rate;
 579 }
 580
 581 static unsigned long clk_get_rate_i2s_i2c_spi(struct clk *clk)
 582 {
 583         u16 val;
 584
 585         val = syscon_clk_get_rate();
 586
 587         switch (val) {
 588         case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
 589         case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
 590                 return 13000000;
 591         case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
 592         case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
 593         case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
 594                 return 26000000;
 595         default:
 596                 break;
 597         }
 598
 599         return clk->rate;
 600 }
 601
 602 unsigned long clk_get_rate(struct clk *clk)
 603 {
 604         if (clk->get_rate)
 605                 return clk->get_rate(clk);
 606         else
 607                 return clk->rate;
 608 }
 609 EXPORT_SYMBOL(clk_get_rate);
 610
 611 static unsigned long clk_round_rate_mclk(struct clk *clk, unsigned long rate)
 612 {
 613         if (rate <= 18900000)
 614                 return 18900000;
 615         if (rate <= 20800000)
 616                 return 20800000;
 617         if (rate <= 23100000)
 618                 return 23100000;
 619         if (rate <= 26000000)
 620                 return 26000000;
 621         if (rate <= 29700000)
 622                 return 29700000;
 623         if (rate <= 34700000)
 624                 return 34700000;
 625         if (rate <= 41600000)
 626                 return 41600000;
 627         if (rate <= 52000000)
 628                 return 52000000;
 629         return -EINVAL;
 630 }
 631
 632 static unsigned long clk_round_rate_cpuclk(struct clk *clk, unsigned long rate)
 633 {
 634         if (rate <= 13000000)
 635                 return 13000000;
 636         if (rate <= 52000000)
 637                 return 52000000;
 638         if (rate <= 104000000)
 639                 return 104000000;
 640         if (rate <= 208000000)
 641                 return 208000000;
 642         return -EINVAL;
 643 }
 644
 645 /*
 646  * This adjusts a requested rate to the closest exact rate
 647  * a certain clock can provide. For a fixed clock it's
 648  * mostly clk->rate.
 649  */
 650 long clk_round_rate(struct clk *clk, unsigned long rate)
 651 {
 652         /* TODO: get apropriate switches for EMIFCLK, AHBCLK and MCLK */
 653         /* Else default to fixed value */
 654
 655         if (clk->round_rate) {
 656                 return (long) clk->round_rate(clk, rate);
 657         } else {
 658                 printk(KERN_ERR "clock: Failed to round rate of %s\n",
 659                        clk->name);
 660         }
 661         return (long) clk->rate;
 662 }
 663 EXPORT_SYMBOL(clk_round_rate);
 664
 665 static int clk_set_rate_mclk(struct clk *clk, unsigned long rate)
 666 {
 667         syscon_clk_rate_set_mclk(clk_round_rate(clk, rate));
 668         return 0;
 669 }
 670
 671 static int clk_set_rate_cpuclk(struct clk *clk, unsigned long rate)
 672 {
 673         syscon_clk_rate_set_cpuclk(clk_round_rate(clk, rate));
 674         return 0;
 675 }
 676
 677 int clk_set_rate(struct clk *clk, unsigned long rate)
 678 {
 679         /* TODO: set for EMIFCLK and AHBCLK */
 680         /* Else assume the clock is fixed and fail */
 681         if (clk->set_rate) {
 682                 return clk->set_rate(clk, rate);
 683         } else {
 684                 printk(KERN_ERR "clock: Failed to set %s to %ld hz\n",
 685                        clk->name, rate);
 686                 return -EINVAL;
 687         }
 688 }
 689 EXPORT_SYMBOL(clk_set_rate);
 690
 691 /*
 692  * Clock definitions. The clock parents are set to respective
 693  * bridge and the clock framework makes sure that the clocks have
 694  * parents activated and are brought out of reset when in use.
 695  *
 696  * Clocks that have hw_ctrld = true are hw controlled, and the hw
 697  * can by itself turn these clocks on and off.
 698  * So in other words, we don't really have to care about them.
 699  */
 700
 701 static struct clk amba_clk = {
 702         .name       = "AMBA",
 703         .rate       = 52000000, /* this varies! */
 704         .hw_ctrld   = true,
 705         .reset      = false,
 706         .lock       = __SPIN_LOCK_UNLOCKED(amba_clk.lock),
 707 };
 708
 709 /*
 710  * These blocks are connected directly to the AMBA bus
 711  * with no bridge.
 712  */
 713
 714 static struct clk cpu_clk = {
 715         .name       = "CPU",
 716         .parent     = &amba_clk,
 717         .rate       = 208000000, /* this varies! */
 718         .hw_ctrld   = true,
 719         .reset      = true,
 720         .res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
 721         .res_mask   = U300_SYSCON_RRR_CPU_RESET_EN,
 722         .set_rate   = clk_set_rate_cpuclk,
 723         .get_rate   = clk_get_rate_cpuclk,
 724         .round_rate = clk_round_rate_cpuclk,
 725         .lock       = __SPIN_LOCK_UNLOCKED(cpu_clk.lock),
 726 };
 727
 728 static struct clk nandif_clk = {
 729         .name       = "NANDIF",
 730         .parent     = &amba_clk,
 731         .hw_ctrld   = false,
 732         .reset      = true,
 733         .res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
 734         .res_mask   = U300_SYSCON_RRR_NANDIF_RESET_EN,
 735         .clk_val    = U300_SYSCON_SBCER_NANDIF_CLK_EN,
 736         .enable     = syscon_clk_enable,
 737         .disable    = syscon_clk_disable,
 738         .lock       = __SPIN_LOCK_UNLOCKED(nandif_clk.lock),
 739 };
 740
 741 static struct clk semi_clk = {
 742         .name       = "SEMI",
 743         .parent     = &amba_clk,
 744         .rate       = 0, /* FIXME */
 745         /* It is not possible to reset SEMI */
 746         .hw_ctrld   = false,
 747         .reset      = false,
 748         .clk_val    = U300_SYSCON_SBCER_SEMI_CLK_EN,
 749         .enable     = syscon_clk_enable,
 750         .disable    = syscon_clk_disable,
 751         .lock       = __SPIN_LOCK_UNLOCKED(semi_clk.lock),
 752 };
 753
 754 #ifdef CONFIG_MACH_U300_BS335
 755 static struct clk isp_clk = {
 756         .name       = "ISP",
 757         .parent     = &amba_clk,
 758         .rate       = 0, /* FIXME */
 759         .hw_ctrld   = false,
 760         .reset      = true,
 761         .res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
 762         .res_mask   = U300_SYSCON_RRR_ISP_RESET_EN,
 763         .clk_val    = U300_SYSCON_SBCER_ISP_CLK_EN,
 764         .enable     = syscon_clk_enable,
 765         .disable    = syscon_clk_disable,
 766         .lock       = __SPIN_LOCK_UNLOCKED(isp_clk.lock),
 767 };
 768
 769 static struct clk cds_clk = {
 770         .name       = "CDS",
 771         .parent     = &amba_clk,
 772         .rate       = 0, /* FIXME */
 773         .hw_ctrld   = false,
 774         .reset      = true,
 775         .res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
 776         .res_mask   = U300_SYSCON_RRR_CDS_RESET_EN,
 777         .clk_val    = U300_SYSCON_SBCER_CDS_CLK_EN,
 778         .enable     = syscon_clk_enable,
 779         .disable    = syscon_clk_disable,
 780         .lock       = __SPIN_LOCK_UNLOCKED(cds_clk.lock),
 781 };
 782 #endif
 783
 784 static struct clk dma_clk = {
 785         .name       = "DMA",
 786         .parent     = &amba_clk,
 787         .rate       = 52000000, /* this varies! */
 788         .hw_ctrld   = true,
 789         .reset      = true,
 790         .res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
 791         .res_mask   = U300_SYSCON_RRR_DMAC_RESET_EN,
 792         .clk_val    = U300_SYSCON_SBCER_DMAC_CLK_EN,
 793         .enable     = syscon_clk_enable,
 794         .disable    = syscon_clk_disable,
 795         .lock       = __SPIN_LOCK_UNLOCKED(dma_clk.lock),
 796 };
 797
 798 static struct clk aaif_clk = {
 799         .name       = "AAIF",
 800         .parent     = &amba_clk,
 801         .rate       = 52000000, /* this varies! */
 802         .hw_ctrld   = true,
 803         .reset      = true,
 804         .res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
 805         .res_mask   = U300_SYSCON_RRR_AAIF_RESET_EN,
 806         .clk_val    = U300_SYSCON_SBCER_AAIF_CLK_EN,
 807         .enable     = syscon_clk_enable,
 808         .disable    = syscon_clk_disable,
 809         .lock       = __SPIN_LOCK_UNLOCKED(aaif_clk.lock),
 810 };
 811
 812 static struct clk apex_clk = {
 813         .name       = "APEX",
 814         .parent     = &amba_clk,
 815         .rate       = 0, /* FIXME */
 816         .hw_ctrld   = true,
 817         .reset      = true,
 818         .res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
 819         .res_mask   = U300_SYSCON_RRR_APEX_RESET_EN,
 820         .clk_val    = U300_SYSCON_SBCER_APEX_CLK_EN,
 821         .enable     = syscon_clk_enable,
 822         .disable    = syscon_clk_disable,
 823         .lock       = __SPIN_LOCK_UNLOCKED(apex_clk.lock),
 824 };
 825
 826 static struct clk video_enc_clk = {
 827         .name       = "VIDEO_ENC",
 828         .parent     = &amba_clk,
 829         .rate       = 208000000, /* this varies! */
 830         .hw_ctrld   = false,
 831         .reset      = false,
 832         .res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
 833         /* This has XGAM in the name but refers to the video encoder */
 834         .res_mask   = U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN,
 835         .clk_val    = U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN,
 836         .enable     = syscon_clk_enable,
 837         .disable    = syscon_clk_disable,
 838         .lock       = __SPIN_LOCK_UNLOCKED(video_enc_clk.lock),
 839 };
 840
 841 static struct clk xgam_clk = {
 842         .name       = "XGAMCLK",
 843         .parent     = &amba_clk,
 844         .rate       = 52000000, /* this varies! */
 845         .hw_ctrld   = false,
 846         .reset      = true,
 847         .res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
 848         .res_mask   = U300_SYSCON_RRR_XGAM_RESET_EN,
 849         .clk_val    = U300_SYSCON_SBCER_XGAM_CLK_EN,
 850         .get_rate   = clk_get_rate_xgamclk,
 851         .enable     = syscon_clk_enable,
 852         .disable    = syscon_clk_disable,
 853         .lock       = __SPIN_LOCK_UNLOCKED(xgam_clk.lock),
 854 };
 855
 856 /* This clock is used to activate the video encoder */
 857 static struct clk ahb_clk = {
 858         .name       = "AHB",
 859         .parent     = &amba_clk,
 860         .rate       = 52000000, /* this varies! */
 861         .hw_ctrld   = false, /* This one is set to false due to HW bug */
 862         .reset      = true,
 863         .res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
 864         .res_mask   = U300_SYSCON_RRR_AHB_RESET_EN,
 865         .clk_val    = U300_SYSCON_SBCER_AHB_CLK_EN,
 866         .enable     = syscon_clk_enable,
 867         .disable    = syscon_clk_disable,
 868         .get_rate   = clk_get_rate_ahb_clk,
 869         .lock       = __SPIN_LOCK_UNLOCKED(ahb_clk.lock),
 870 };
 871
 872
 873 /*
 874  * Clocks on the AHB bridge
 875  */
 876
 877 static struct clk ahb_subsys_clk = {
 878         .name       = "AHB_SUBSYS",
 879         .parent     = &amba_clk,
 880         .rate       = 52000000, /* this varies! */
 881         .hw_ctrld   = true,
 882         .reset      = false,
 883         .clk_val    = U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN,
 884         .enable     = syscon_clk_enable,
 885         .disable    = syscon_clk_disable,
 886         .get_rate   = clk_get_rate_ahb_clk,
 887         .lock       = __SPIN_LOCK_UNLOCKED(ahb_subsys_clk.lock),
 888 };
 889
 890 static struct clk intcon_clk = {
 891         .name       = "INTCON",
 892         .parent     = &ahb_subsys_clk,
 893         .rate       = 52000000, /* this varies! */
 894         .hw_ctrld   = false,
 895         .reset      = true,
 896         .res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
 897         .res_mask   = U300_SYSCON_RRR_INTCON_RESET_EN,
 898         /* INTCON can be reset but not clock-gated */
 899         .lock       = __SPIN_LOCK_UNLOCKED(intcon_clk.lock),
 900
 901 };
 902
 903 static struct clk mspro_clk = {
 904         .name       = "MSPRO",
 905         .parent     = &ahb_subsys_clk,
 906         .rate       = 0, /* FIXME */
 907         .hw_ctrld   = false,
 908         .reset      = true,
 909         .res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
 910         .res_mask   = U300_SYSCON_RRR_MSPRO_RESET_EN,
 911         .clk_val    = U300_SYSCON_SBCER_MSPRO_CLK_EN,
 912         .enable     = syscon_clk_enable,
 913         .disable    = syscon_clk_disable,
 914         .lock       = __SPIN_LOCK_UNLOCKED(mspro_clk.lock),
 915 };
 916
 917 static struct clk emif_clk = {
 918         .name       = "EMIF",
 919         .parent     = &ahb_subsys_clk,
 920         .rate       = 104000000, /* this varies! */
 921         .hw_ctrld   = false,
 922         .reset      = true,
 923         .res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
 924         .res_mask   = U300_SYSCON_RRR_EMIF_RESET_EN,
 925         .clk_val    = U300_SYSCON_SBCER_EMIF_CLK_EN,
 926         .enable     = syscon_clk_enable,
 927         .disable    = syscon_clk_disable,
 928         .get_rate   = clk_get_rate_emif_clk,
 929         .lock       = __SPIN_LOCK_UNLOCKED(emif_clk.lock),
 930 };
 931
 932
 933 /*
 934  * Clocks on the FAST bridge
 935  */
 936 static struct clk fast_clk = {
 937         .name       = "FAST_BRIDGE",
 938         .parent     = &amba_clk,
 939         .rate       = 13000000, /* this varies! */
 940         .hw_ctrld   = true,
 941         .reset      = true,
 942         .res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
 943         .res_mask   = U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE,
 944         .clk_val    = U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN,
 945         .enable     = syscon_clk_enable,
 946         .disable    = syscon_clk_disable,
 947         .lock       = __SPIN_LOCK_UNLOCKED(fast_clk.lock),
 948 };
 949
 950 static struct clk mmcsd_clk = {
 951         .name       = "MCLK",
 952         .parent     = &fast_clk,
 953         .rate       = 18900000, /* this varies! */
 954         .hw_ctrld   = false,
 955         .reset      = true,
 956         .res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
 957         .res_mask   = U300_SYSCON_RFR_MMC_RESET_ENABLE,
 958         .clk_val    = U300_SYSCON_SBCER_MMC_CLK_EN,
 959         .get_rate   = clk_get_rate_mclk,
 960         .set_rate   = clk_set_rate_mclk,
 961         .round_rate = clk_round_rate_mclk,
 962         .disable    = syscon_clk_disable,
 963         .enable     = syscon_clk_enable,
 964         .lock       = __SPIN_LOCK_UNLOCKED(mmcsd_clk.lock),
 965 };
 966
 967 static struct clk i2s0_clk = {
 968         .name       = "i2s0",
 969         .parent     = &fast_clk,
 970         .rate       = 26000000, /* this varies! */
 971         .hw_ctrld   = true,
 972         .reset      = true,
 973         .res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
 974         .res_mask   = U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE,
 975         .clk_val    = U300_SYSCON_SBCER_I2S0_CORE_CLK_EN,
 976         .enable     = syscon_clk_enable,
 977         .disable    = syscon_clk_disable,
 978         .get_rate   = clk_get_rate_i2s_i2c_spi,
 979         .lock       = __SPIN_LOCK_UNLOCKED(i2s0_clk.lock),
 980 };
 981
 982 static struct clk i2s1_clk = {
 983         .name       = "i2s1",
 984         .parent     = &fast_clk,
 985         .rate       = 26000000, /* this varies! */
 986         .hw_ctrld   = true,
 987         .reset      = true,
 988         .res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
 989         .res_mask   = U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE,
 990         .clk_val    = U300_SYSCON_SBCER_I2S1_CORE_CLK_EN,
 991         .enable     = syscon_clk_enable,
 992         .disable    = syscon_clk_disable,
 993         .get_rate   = clk_get_rate_i2s_i2c_spi,
 994         .lock       = __SPIN_LOCK_UNLOCKED(i2s1_clk.lock),
 995 };
 996
 997 static struct clk i2c0_clk = {
 998         .name       = "I2C0",
 999         .parent     = &fast_clk,
1000         .rate       = 26000000, /* this varies! */
1001         .hw_ctrld   = false,
1002         .reset      = true,
1003         .res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
1004         .res_mask   = U300_SYSCON_RFR_I2C0_RESET_ENABLE,
1005         .clk_val    = U300_SYSCON_SBCER_I2C0_CLK_EN,
1006         .enable     = syscon_clk_enable,
1007         .disable    = syscon_clk_disable,
1008         .get_rate   = clk_get_rate_i2s_i2c_spi,
1009         .lock       = __SPIN_LOCK_UNLOCKED(i2c0_clk.lock),
1010 };
1011
1012 static struct clk i2c1_clk = {
1013         .name       = "I2C1",
1014         .parent     = &fast_clk,
1015         .rate       = 26000000, /* this varies! */
1016         .hw_ctrld   = false,
1017         .reset      = true,
1018         .res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
1019         .res_mask   = U300_SYSCON_RFR_I2C1_RESET_ENABLE,
1020         .clk_val    = U300_SYSCON_SBCER_I2C1_CLK_EN,
1021         .enable     = syscon_clk_enable,
1022         .disable    = syscon_clk_disable,
1023         .get_rate   = clk_get_rate_i2s_i2c_spi,
1024         .lock       = __SPIN_LOCK_UNLOCKED(i2c1_clk.lock),
1025 };
1026
1027 static struct clk spi_clk = {
1028         .name       = "SPI",
1029         .parent     = &fast_clk,
1030         .rate       = 26000000, /* this varies! */
1031         .hw_ctrld   = false,
1032         .reset      = true,
1033         .res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
1034         .res_mask   = U300_SYSCON_RFR_SPI_RESET_ENABLE,
1035         .clk_val    = U300_SYSCON_SBCER_SPI_CLK_EN,
1036         .enable     = syscon_clk_enable,
1037         .disable    = syscon_clk_disable,
1038         .get_rate   = clk_get_rate_i2s_i2c_spi,
1039         .lock       = __SPIN_LOCK_UNLOCKED(spi_clk.lock),
1040 };
1041
1042 #ifdef CONFIG_MACH_U300_BS335
1043 static struct clk uart1_clk = {
1044         .name       = "UART1",
1045         .parent     = &fast_clk,
1046         .rate       = 13000000,
1047         .hw_ctrld   = false,
1048         .reset      = true,
1049         .res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
1050         .res_mask   = U300_SYSCON_RFR_UART1_RESET_ENABLE,
1051         .clk_val    = U300_SYSCON_SBCER_UART1_CLK_EN,
1052         .enable     = syscon_clk_enable,
1053         .disable    = syscon_clk_disable,
1054         .lock       = __SPIN_LOCK_UNLOCKED(uart1_clk.lock),
1055 };
1056 #endif
1057
1058
1059 /*
1060  * Clocks on the SLOW bridge
1061  */
1062 static struct clk slow_clk = {
1063         .name       = "SLOW_BRIDGE",
1064         .parent     = &amba_clk,
1065         .rate       = 13000000,
1066         .hw_ctrld   = true,
1067         .reset      = true,
1068         .res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
1069         .res_mask   = U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN,
1070         .clk_val    = U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN,
1071         .enable     = syscon_clk_enable,
1072         .disable    = syscon_clk_disable,
1073         .lock       = __SPIN_LOCK_UNLOCKED(slow_clk.lock),
1074 };
1075
1076 /* TODO: implement SYSCON clock? */
1077
1078 static struct clk wdog_clk = {
1079         .name       = "WDOG",
1080         .parent     = &slow_clk,
1081         .hw_ctrld   = false,
1082         .rate       = 32768,
1083         .reset      = false,
1084         /* This is always on, cannot be enabled/disabled or reset */
1085         .lock       = __SPIN_LOCK_UNLOCKED(wdog_clk.lock),
1086 };
1087
1088 /* This one is hardwired to PLL13 */
1089 static struct clk uart_clk = {
1090         .name       = "UARTCLK",
1091         .parent     = &slow_clk,
1092         .rate       = 13000000,
1093         .hw_ctrld   = false,
1094         .reset      = true,
1095         .res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
1096         .res_mask   = U300_SYSCON_RSR_UART_RESET_EN,
1097         .clk_val    = U300_SYSCON_SBCER_UART_CLK_EN,
1098         .enable     = syscon_clk_enable,
1099         .disable    = syscon_clk_disable,
1100         .lock       = __SPIN_LOCK_UNLOCKED(uart_clk.lock),
1101 };
1102
1103 static struct clk keypad_clk = {
1104         .name       = "KEYPAD",
1105         .parent     = &slow_clk,
1106         .rate       = 32768,
1107         .hw_ctrld   = false,
1108         .reset      = true,
1109         .res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
1110         .res_mask   = U300_SYSCON_RSR_KEYPAD_RESET_EN,
1111         .clk_val    = U300_SYSCON_SBCER_KEYPAD_CLK_EN,
1112         .enable     = syscon_clk_enable,
1113         .disable    = syscon_clk_disable,
1114         .lock       = __SPIN_LOCK_UNLOCKED(keypad_clk.lock),
1115 };
1116
1117 static struct clk gpio_clk = {
1118         .name       = "GPIO",
1119         .parent     = &slow_clk,
1120         .rate       = 13000000,
1121         .hw_ctrld   = true,
1122         .reset      = true,
1123         .res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
1124         .res_mask   = U300_SYSCON_RSR_GPIO_RESET_EN,
1125         .clk_val    = U300_SYSCON_SBCER_GPIO_CLK_EN,
1126         .enable     = syscon_clk_enable,
1127         .disable    = syscon_clk_disable,
1128         .lock       = __SPIN_LOCK_UNLOCKED(gpio_clk.lock),
1129 };
1130
1131 static struct clk rtc_clk = {
1132         .name       = "RTC",
1133         .parent     = &slow_clk,
1134         .rate       = 32768,
1135         .hw_ctrld   = true,
1136         .reset      = true,
1137         .res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
1138         .res_mask   = U300_SYSCON_RSR_RTC_RESET_EN,
1139         /* This clock is always on, cannot be enabled/disabled */
1140         .lock       = __SPIN_LOCK_UNLOCKED(rtc_clk.lock),
1141 };
1142
1143 static struct clk bustr_clk = {
1144         .name       = "BUSTR",
1145         .parent     = &slow_clk,
1146         .rate       = 13000000,
1147         .hw_ctrld   = true,
1148         .reset      = true,
1149         .res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
1150         .res_mask   = U300_SYSCON_RSR_BTR_RESET_EN,
1151         .clk_val    = U300_SYSCON_SBCER_BTR_CLK_EN,
1152         .enable     = syscon_clk_enable,
1153         .disable    = syscon_clk_disable,
1154         .lock       = __SPIN_LOCK_UNLOCKED(bustr_clk.lock),
1155 };
1156
1157 static struct clk evhist_clk = {
1158         .name       = "EVHIST",
1159         .parent     = &slow_clk,
1160         .rate       = 13000000,
1161         .hw_ctrld   = true,
1162         .reset      = true,
1163         .res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
1164         .res_mask   = U300_SYSCON_RSR_EH_RESET_EN,
1165         .clk_val    = U300_SYSCON_SBCER_EH_CLK_EN,
1166         .enable     = syscon_clk_enable,
1167         .disable    = syscon_clk_disable,
1168         .lock       = __SPIN_LOCK_UNLOCKED(evhist_clk.lock),
1169 };
1170
1171 static struct clk timer_clk = {
1172         .name       = "TIMER",
1173         .parent     = &slow_clk,
1174         .rate       = 13000000,
1175         .hw_ctrld   = true,
1176         .reset      = true,
1177         .res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
1178         .res_mask   = U300_SYSCON_RSR_ACC_TMR_RESET_EN,
1179         .clk_val    = U300_SYSCON_SBCER_ACC_TMR_CLK_EN,
1180         .enable     = syscon_clk_enable,
1181         .disable    = syscon_clk_disable,
1182         .lock       = __SPIN_LOCK_UNLOCKED(timer_clk.lock),
1183 };
1184
1185 static struct clk app_timer_clk = {
1186         .name       = "TIMER_APP",
1187         .parent     = &slow_clk,
1188         .rate       = 13000000,
1189         .hw_ctrld   = true,
1190         .reset      = true,
1191         .res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
1192         .res_mask   = U300_SYSCON_RSR_APP_TMR_RESET_EN,
1193         .clk_val    = U300_SYSCON_SBCER_APP_TMR_CLK_EN,
1194         .enable     = syscon_clk_enable,
1195         .disable    = syscon_clk_disable,
1196         .lock       = __SPIN_LOCK_UNLOCKED(app_timer_clk.lock),
1197 };
1198
1199 #ifdef CONFIG_MACH_U300_BS335
1200 static struct clk ppm_clk = {
1201         .name       = "PPM",
1202         .parent     = &slow_clk,
1203         .rate       = 0, /* FIXME */
1204         .hw_ctrld   = true, /* TODO: Look up if it is hw ctrld or not */
1205         .reset      = true,
1206         .res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
1207         .res_mask   = U300_SYSCON_RSR_PPM_RESET_EN,
1208         .clk_val    = U300_SYSCON_SBCER_PPM_CLK_EN,
1209         .enable     = syscon_clk_enable,
1210         .disable    = syscon_clk_disable,
1211         .lock       = __SPIN_LOCK_UNLOCKED(ppm_clk.lock),
1212 };
1213 #endif
1214
1215 #define DEF_LOOKUP(devid, clkref)               \
1216         {                                       \
1217         .dev_id = devid,                        \
1218         .clk = clkref,                          \
1219         }
1220
1221 /*
1222  * Here we only define clocks that are meaningful to
1223  * look up through clockdevice.
1224  */
1225 static struct clk_lookup lookups[] = {
1226         /* Connected directly to the AMBA bus */
1227         DEF_LOOKUP("amba",      &amba_clk),
1228         DEF_LOOKUP("cpu",       &cpu_clk),
1229         DEF_LOOKUP("fsmc",      &nandif_clk),
1230         DEF_LOOKUP("semi",      &semi_clk),
1231 #ifdef CONFIG_MACH_U300_BS335
1232         DEF_LOOKUP("isp",       &isp_clk),
1233         DEF_LOOKUP("cds",       &cds_clk),
1234 #endif
1235         DEF_LOOKUP("dma",       &dma_clk),
1236         DEF_LOOKUP("msl",       &aaif_clk),
1237         DEF_LOOKUP("apex",      &apex_clk),
1238         DEF_LOOKUP("video_enc", &video_enc_clk),
1239         DEF_LOOKUP("xgam",      &xgam_clk),
1240         DEF_LOOKUP("ahb",       &ahb_clk),
1241         /* AHB bridge clocks */
1242         DEF_LOOKUP("ahb_subsys", &ahb_subsys_clk),
1243         DEF_LOOKUP("intcon",    &intcon_clk),
1244         DEF_LOOKUP("mspro",     &mspro_clk),
1245         DEF_LOOKUP("pl172",     &emif_clk),
1246         /* FAST bridge clocks */
1247         DEF_LOOKUP("fast",      &fast_clk),
1248         DEF_LOOKUP("mmci",      &mmcsd_clk),
1249         /*
1250          * The .0 and .1 identifiers on these comes from the platform device
1251          * .id field and are assigned when the platform devices are registered.
1252          */
1253         DEF_LOOKUP("i2s.0",     &i2s0_clk),
1254         DEF_LOOKUP("i2s.1",     &i2s1_clk),
1255         DEF_LOOKUP("stu300.0",  &i2c0_clk),
1256         DEF_LOOKUP("stu300.1",  &i2c1_clk),
1257         DEF_LOOKUP("pl022",     &spi_clk),
1258 #ifdef CONFIG_MACH_U300_BS335
1259         DEF_LOOKUP("uart1",     &uart1_clk),
1260 #endif
1261         /* SLOW bridge clocks */
1262         DEF_LOOKUP("slow",      &slow_clk),
1263         DEF_LOOKUP("coh901327_wdog",      &wdog_clk),
1264         DEF_LOOKUP("uart0",     &uart_clk),
1265         DEF_LOOKUP("apptimer",  &app_timer_clk),
1266         DEF_LOOKUP("coh901461-keypad",    &keypad_clk),
1267         DEF_LOOKUP("u300-gpio", &gpio_clk),
1268         DEF_LOOKUP("rtc-coh901331",      &rtc_clk),
1269         DEF_LOOKUP("bustr",     &bustr_clk),
1270         DEF_LOOKUP("evhist",    &evhist_clk),
1271         DEF_LOOKUP("timer",     &timer_clk),
1272 #ifdef CONFIG_MACH_U300_BS335
1273         DEF_LOOKUP("ppm",       &ppm_clk),
1274 #endif
1275 };
1276
1277 static void __init clk_register(void)
1278 {
1279         /* Register the lookups */
1280         clkdev_add_table(lookups, ARRAY_SIZE(lookups));
1281 }
1282
1283 /*
1284  * These are the clocks for cells registered as primecell drivers
1285  * on the AMBA bus. These must be on during AMBA device registration
1286  * since the bus probe will attempt to read magic configuration
1287  * registers for these devices. If they are deactivated these probes
1288  * will fail.
1289  *
1290  *
1291  * Please note that on emif, both RAM and NAND is connected in dual
1292  * RAM phones. On single RAM phones, ram is on semi and NAND on emif.
1293  *
1294  */
1295 void u300_clock_primecells(void)
1296 {
1297         clk_enable(&intcon_clk);
1298         clk_enable(&uart_clk);
1299 #ifdef CONFIG_MACH_U300_BS335
1300         clk_enable(&uart1_clk);
1301 #endif
1302         clk_enable(&spi_clk);
1303
1304         clk_enable(&mmcsd_clk);
1305
1306 }
1307 EXPORT_SYMBOL(u300_clock_primecells);
1308
1309 void u300_unclock_primecells(void)
1310 {
1311
1312         clk_disable(&intcon_clk);
1313         clk_disable(&uart_clk);
1314 #ifdef CONFIG_MACH_U300_BS335
1315         clk_disable(&uart1_clk);
1316 #endif
1317         clk_disable(&spi_clk);
1318         clk_disable(&mmcsd_clk);
1319
1320 }
1321 EXPORT_SYMBOL(u300_unclock_primecells);
1322
1323 /*
1324  * The interrupt controller is enabled before the clock API is registered.
1325  */
1326 void u300_enable_intcon_clock(void)
1327 {
1328         clk_enable(&intcon_clk);
1329 }
1330 EXPORT_SYMBOL(u300_enable_intcon_clock);
1331
1332 /*
1333  * The timer is enabled before the clock API is registered.
1334  */
1335 void u300_enable_timer_clock(void)
1336 {
1337         clk_enable(&app_timer_clk);
1338 }
1339 EXPORT_SYMBOL(u300_enable_timer_clock);
1340
1341 #if (defined(CONFIG_DEBUG_FS) && defined(CONFIG_U300_DEBUG))
1342 /*
1343  * The following makes it possible to view the status (especially
1344  * reference count and reset status) for the clocks in the platform
1345  * by looking into the special file <debugfs>/u300_clocks
1346  */
1347
1348 /* A list of all clocks in the platform */
1349 static struct clk *clks[] = {
1350         /* Top node clock for the AMBA bus */
1351         &amba_clk,
1352         /* Connected directly to the AMBA bus */
1353         &cpu_clk,
1354         &nandif_clk,
1355         &semi_clk,
1356 #ifdef CONFIG_MACH_U300_BS335
1357         &isp_clk,
1358         &cds_clk,
1359 #endif
1360         &dma_clk,
1361         &aaif_clk,
1362         &apex_clk,
1363         &video_enc_clk,
1364         &xgam_clk,
1365         &ahb_clk,
1366
1367         /* AHB bridge clocks */
1368         &ahb_subsys_clk,
1369         &intcon_clk,
1370         &mspro_clk,
1371         &emif_clk,
1372         /* FAST bridge clocks */
1373         &fast_clk,
1374         &mmcsd_clk,
1375         &i2s0_clk,
1376         &i2s1_clk,
1377         &i2c0_clk,
1378         &i2c1_clk,
1379         &spi_clk,
1380 #ifdef CONFIG_MACH_U300_BS335
1381         &uart1_clk,
1382 #endif
1383         /* SLOW bridge clocks */
1384         &slow_clk,
1385         &wdog_clk,
1386         &uart_clk,
1387         &app_timer_clk,
1388         &keypad_clk,
1389         &gpio_clk,
1390         &rtc_clk,
1391         &bustr_clk,
1392         &evhist_clk,
1393         &timer_clk,
1394 #ifdef CONFIG_MACH_U300_BS335
1395         &ppm_clk,
1396 #endif
1397 };
1398
1399 static int u300_clocks_show(struct seq_file *s, void *data)
1400 {
1401         struct clk *clk;
1402         int i;
1403
1404         seq_printf(s, "CLOCK           DEVICE          RESET STATE\t" \
1405                    "ACTIVE\tUSERS\tHW CTRL FREQ\n");
1406         seq_printf(s, "---------------------------------------------" \
1407                    "-----------------------------------------\n");
1408         for (i = 0; i < ARRAY_SIZE(clks); i++) {
1409                 clk = clks[i];
1410                 if (clk != ERR_PTR(-ENOENT)) {
1411                         /* Format clock and device name nicely */
1412                         char cdp[33];
1413                         int chars;
1414
1415                         chars = snprintf(&cdp[0], 17, "%s", clk->name);
1416                         while (chars < 16) {
1417                                 cdp[chars] = ' ';
1418                                 chars++;
1419                         }
1420                         chars = snprintf(&cdp[16], 17, "%s", clk->dev ?
1421                                          dev_name(clk->dev) : "N/A");
1422                         while (chars < 16) {
1423                                 cdp[chars+16] = ' ';
1424                                 chars++;
1425                         }
1426                         cdp[32] = '\0';
1427                         if (clk->get_rate)
1428                                 seq_printf(s,
1429                                            "%s%s\t%s\t%d\t%s\t%lu Hz\n",
1430                                            &cdp[0],
1431                                            clk->reset ?
1432                                            "ASSERTED" : "RELEASED",
1433                                            clk->usecount ? "ON" : "OFF",
1434                                            clk->usecount,
1435                                            clk->hw_ctrld  ? "YES" : "NO ",
1436                                            clk->get_rate(clk));
1437                         else
1438                                 seq_printf(s,
1439                                            "%s%s\t%s\t%d\t%s\t" \
1440                                            "(unknown rate)\n",
1441                                            &cdp[0],
1442                                            clk->reset ?
1443                                            "ASSERTED" : "RELEASED",
1444                                            clk->usecount ? "ON" : "OFF",
1445                                            clk->usecount,
1446                                            clk->hw_ctrld  ? "YES" : "NO ");
1447                 }
1448         }
1449         return 0;
1450 }
1451
1452 static int u300_clocks_open(struct inode *inode, struct file *file)
1453 {
1454         return single_open(file, u300_clocks_show, NULL);
1455 }
1456
1457 static const struct file_operations u300_clocks_operations = {
1458         .open           = u300_clocks_open,
1459         .read           = seq_read,
1460         .llseek         = seq_lseek,
1461         .release        = single_release,
1462 };
1463
1464 static int __init init_clk_read_debugfs(void)
1465 {
1466         /* Expose a simple debugfs interface to view all clocks */
1467         (void) debugfs_create_file("u300_clocks", S_IFREG | S_IRUGO,
1468                                    NULL, NULL,
1469                                    &u300_clocks_operations);
1470         return 0;
1471 }
1472 /*
1473  * This needs to come in after the core_initcall() for the
1474  * overall clocks, because debugfs is not available until
1475  * the subsystems come up.
1476  */
1477 module_init(init_clk_read_debugfs);
1478 #endif
1479
1480 static int __init u300_clock_init(void)
1481 {
1482         u16 val;
1483
1484         /*
1485          * FIXME: shall all this powermanagement stuff really live here???
1486          */
1487
1488         /* Set system to run at PLL208, max performance, a known state. */
1489         val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
1490         val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
1491         writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
1492         /* Wait for the PLL208 to lock if not locked in yet */
1493         while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) &
1494                  U300_SYSCON_CSR_PLL208_LOCK_IND));
1495
1496         /* Power management enable */
1497         val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMCR);
1498         val |= U300_SYSCON_PMCR_PWR_MGNT_ENABLE;
1499         writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMCR);
1500
1501         clk_register();
1502
1503         /*
1504          * Some of these may be on when we boot the system so make sure they
1505          * are turned OFF.
1506          */
1507         syscon_block_reset_enable(&timer_clk);
1508         timer_clk.disable(&timer_clk);
1509
1510         /*
1511          * These shall be turned on by default when we boot the system
1512          * so make sure they are ON. (Adding CPU here is a bit too much.)
1513          * These clocks will be claimed by drivers later.
1514          */
1515         syscon_block_reset_disable(&semi_clk);
1516         syscon_block_reset_disable(&emif_clk);
1517         semi_clk.enable(&semi_clk);
1518         emif_clk.enable(&emif_clk);
1519
1520         return 0;
1521 }
1522 /* initialize clocking early to be available later in the boot */
1523 core_initcall(u300_clock_init);