2 * Copyright (C) 2008-2009 ST-Ericsson SA
4 * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2, as
8 * published by the Free Software Foundation.
11 #include <linux/types.h>
12 #include <linux/init.h>
13 #include <linux/device.h>
14 #include <linux/amba/bus.h>
15 #include <linux/init.h>
16 #include <linux/interrupt.h>
17 #include <linux/irq.h>
18 #include <linux/irqchip.h>
19 #include <linux/irqchip/arm-gic.h>
20 #include <linux/mfd/dbx500-prcmu.h>
21 #include <linux/platform_data/arm-ux500-pm.h>
22 #include <linux/platform_device.h>
25 #include <linux/of_address.h>
26 #include <linux/of_platform.h>
27 #include <linux/perf/arm_pmu.h>
28 #include <linux/regulator/machine.h>
30 #include <asm/outercache.h>
31 #include <asm/hardware/cache-l2x0.h>
32 #include <asm/mach/map.h>
33 #include <asm/mach/arch.h>
37 #include "board-mop500.h"
38 #include "db8500-regs.h"
40 static int __init
ux500_l2x0_unlock(void)
43 struct device_node
*np
;
44 void __iomem
*l2x0_base
;
46 np
= of_find_compatible_node(NULL
, NULL
, "arm,pl310-cache");
47 l2x0_base
= of_iomap(np
, 0);
53 * Unlock Data and Instruction Lock if locked. Ux500 U-Boot versions
54 * apparently locks both caches before jumping to the kernel. The
55 * l2x0 core will not touch the unlock registers if the l2x0 is
56 * already enabled, so we do it right here instead. The PL310 has
57 * 8 sets of registers, one per possible CPU.
59 for (i
= 0; i
< 8; i
++) {
60 writel_relaxed(0x0, l2x0_base
+ L2X0_LOCKDOWN_WAY_D_BASE
+
61 i
* L2X0_LOCKDOWN_STRIDE
);
62 writel_relaxed(0x0, l2x0_base
+ L2X0_LOCKDOWN_WAY_I_BASE
+
63 i
* L2X0_LOCKDOWN_STRIDE
);
69 static void ux500_l2c310_write_sec(unsigned long val
, unsigned reg
)
72 * We can't write to secure registers as we are in non-secure
73 * mode, until we have some SMI service available.
78 * FIXME: Should we set up the GPIO domain here?
80 * The problem is that we cannot put the interrupt resources into the platform
81 * device until the irqdomain has been added. Right now, we set the GIC interrupt
82 * domain from init_irq(), then load the gpio driver from
83 * core_initcall(nmk_gpio_init) and add the platform devices from
84 * arch_initcall(customize_machine).
86 * This feels fragile because it depends on the gpio device getting probed
87 * _before_ any device uses the gpio interrupts.
89 static void __init
ux500_init_irq(void)
91 struct device_node
*np
;
95 np
= of_find_compatible_node(NULL
, NULL
, "stericsson,db8500-prcmu");
96 of_address_to_resource(np
, 0, &r
);
99 pr_err("could not find PRCMU base resource\n");
102 prcmu_early_init(r
.start
, r
.end
-r
.start
);
103 ux500_pm_init(r
.start
, r
.end
-r
.start
);
105 /* Unlock before init */
107 outer_cache
.write_sec
= ux500_l2c310_write_sec
;
110 static void ux500_restart(enum reboot_mode mode
, const char *cmd
)
115 prcmu_system_reset(0);
119 * The PMU IRQ lines of two cores are wired together into a single interrupt.
120 * Bounce the interrupt to the other core if it's not ours.
122 static irqreturn_t
db8500_pmu_handler(int irq
, void *dev
, irq_handler_t handler
)
124 irqreturn_t ret
= handler(irq
, dev
);
125 int other
= !smp_processor_id();
127 if (ret
== IRQ_NONE
&& cpu_online(other
))
128 irq_set_affinity(irq
, cpumask_of(other
));
131 * We should be able to get away with the amount of IRQ_NONEs we give,
132 * while still having the spurious IRQ detection code kick in if the
133 * interrupt really starts hitting spuriously.
138 static struct arm_pmu_platdata db8500_pmu_platdata
= {
139 .handle_irq
= db8500_pmu_handler
,
142 static struct of_dev_auxdata u8500_auxdata_lookup
[] __initdata
= {
143 /* Requires call-back bindings. */
144 OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata
),
145 /* Requires DMA bindings. */
146 OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
147 "ux500-msp-i2s.0", &msp0_platform_data
),
148 OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000,
149 "ux500-msp-i2s.1", &msp1_platform_data
),
150 OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80117000,
151 "ux500-msp-i2s.2", &msp2_platform_data
),
152 OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000,
153 "ux500-msp-i2s.3", &msp3_platform_data
),
154 /* Requires non-DT:able platform data. */
155 OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", NULL
),
156 OF_DEV_AUXDATA("stericsson,ux500-cryp", 0xa03cb000, "cryp1", NULL
),
157 OF_DEV_AUXDATA("stericsson,ux500-hash", 0xa03c2000, "hash1", NULL
),
158 OF_DEV_AUXDATA("stericsson,snd-soc-mop500", 0, "snd-soc-mop500.0",
163 static struct of_dev_auxdata u8540_auxdata_lookup
[] __initdata
= {
164 OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", NULL
),
168 static const struct of_device_id u8500_local_bus_nodes
[] = {
169 /* only create devices below soc node */
170 { .compatible
= "stericsson,db8500", },
171 { .compatible
= "stericsson,db8500-prcmu", },
172 { .compatible
= "simple-bus"},
176 static void __init
u8500_init_machine(void)
178 /* automatically probe child nodes of dbx5x0 devices */
179 if (of_machine_is_compatible("st-ericsson,u8540"))
180 of_platform_populate(NULL
, u8500_local_bus_nodes
,
181 u8540_auxdata_lookup
, NULL
);
183 of_platform_populate(NULL
, u8500_local_bus_nodes
,
184 u8500_auxdata_lookup
, NULL
);
187 static const char * stericsson_dt_platform_compat
[] = {
195 DT_MACHINE_START(U8500_DT
, "ST-Ericsson Ux5x0 platform (Device Tree Support)")
198 .init_irq
= ux500_init_irq
,
199 .init_machine
= u8500_init_machine
,
200 .dt_compat
= stericsson_dt_platform_compat
,
201 .restart
= ux500_restart
,