2 * Copyright 2007-2009 Analog Devices Inc.
3 * Philippe Gerum <rpm@xenomai.org>
5 * Licensed under the GPL-2 or later.
8 #include <linux/init.h>
9 #include <linux/kernel.h>
10 #include <linux/sched.h>
11 #include <linux/delay.h>
16 static DEFINE_SPINLOCK(boot_lock
);
19 * platform_init_cpus() - Tell the world about how many cores we
20 * have. This is called while setting up the architecture support
21 * (setup_arch()), so don't be too demanding here with respect to
22 * available kernel services.
25 void __init
platform_init_cpus(void)
29 cpumask_set_cpu(0, &mask
); /* CoreA */
30 cpumask_set_cpu(1, &mask
); /* CoreB */
31 init_cpu_possible(&mask
);
34 void __init
platform_prepare_cpus(unsigned int max_cpus
)
38 bfin_relocate_coreb_l1_mem();
40 /* Both cores ought to be present on a bf561! */
41 cpumask_set_cpu(0, &mask
); /* CoreA */
42 cpumask_set_cpu(1, &mask
); /* CoreB */
43 init_cpu_present(&mask
);
46 int __init
setup_profiling_timer(unsigned int multiplier
) /* not supported */
51 void __cpuinit
platform_secondary_init(unsigned int cpu
)
53 /* Clone setup for peripheral interrupt sources from CoreA. */
54 bfin_write_SICB_IMASK0(bfin_read_SIC_IMASK0());
55 bfin_write_SICB_IMASK1(bfin_read_SIC_IMASK1());
58 /* Clone setup for IARs from CoreA. */
59 bfin_write_SICB_IAR0(bfin_read_SIC_IAR0());
60 bfin_write_SICB_IAR1(bfin_read_SIC_IAR1());
61 bfin_write_SICB_IAR2(bfin_read_SIC_IAR2());
62 bfin_write_SICB_IAR3(bfin_read_SIC_IAR3());
63 bfin_write_SICB_IAR4(bfin_read_SIC_IAR4());
64 bfin_write_SICB_IAR5(bfin_read_SIC_IAR5());
65 bfin_write_SICB_IAR6(bfin_read_SIC_IAR6());
66 bfin_write_SICB_IAR7(bfin_read_SIC_IAR7());
67 bfin_write_SICB_IWR0(IWR_DISABLE_ALL
);
68 bfin_write_SICB_IWR1(IWR_DISABLE_ALL
);
71 /* We are done with local CPU inits, unblock the boot CPU. */
72 set_cpu_online(cpu
, true);
73 spin_lock(&boot_lock
);
74 spin_unlock(&boot_lock
);
77 int __cpuinit
platform_boot_secondary(unsigned int cpu
, struct task_struct
*idle
)
79 unsigned long timeout
;
81 printk(KERN_INFO
"Booting Core B.\n");
83 spin_lock(&boot_lock
);
85 if ((bfin_read_SYSCR() & COREB_SRAM_INIT
) == 0) {
86 /* CoreB already running, sending ipi to wakeup it */
87 smp_send_reschedule(cpu
);
89 /* Kick CoreB, which should start execution from CORE_SRAM_BASE. */
90 bfin_write_SYSCR(bfin_read_SYSCR() & ~COREB_SRAM_INIT
);
94 timeout
= jiffies
+ 1 * HZ
;
95 while (time_before(jiffies
, timeout
)) {
102 if (cpu_online(cpu
)) {
103 /* release the lock and let coreb run */
104 spin_unlock(&boot_lock
);
107 panic("CPU%u: processor failed to boot\n", cpu
);
110 static const char supple0
[] = "IRQ_SUPPLE_0";
111 static const char supple1
[] = "IRQ_SUPPLE_1";
112 void __init
platform_request_ipi(int irq
, void *handler
)
115 const char *name
= (irq
== IRQ_SUPPLE_0
) ? supple0
: supple1
;
117 ret
= request_irq(irq
, handler
, IRQF_PERCPU
| IRQF_NO_SUSPEND
|
118 IRQF_FORCE_RESUME
, name
, handler
);
120 panic("Cannot request %s for IPI service", name
);
123 void platform_send_ipi(cpumask_t callmap
, int irq
)
126 int offset
= (irq
== IRQ_SUPPLE_0
) ? 6 : 8;
128 for_each_cpu_mask(cpu
, callmap
) {
131 bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | (1 << (offset
+ cpu
)));
136 void platform_send_ipi_cpu(unsigned int cpu
, int irq
)
138 int offset
= (irq
== IRQ_SUPPLE_0
) ? 6 : 8;
141 bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | (1 << (offset
+ cpu
)));
145 void platform_clear_ipi(unsigned int cpu
, int irq
)
147 int offset
= (irq
== IRQ_SUPPLE_0
) ? 10 : 12;
150 bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | (1 << (offset
+ cpu
)));
155 * Setup core B's local core timer.
156 * In SMP, core timer is used for clock event device.
158 void __cpuinit
bfin_local_timer_setup(void)
160 #if defined(CONFIG_TICKSOURCE_CORETMR)
161 struct irq_data
*data
= irq_get_irq_data(IRQ_CORETMR
);
162 struct irq_chip
*chip
= irq_data_get_irq_chip(data
);
165 bfin_coretmr_clockevent_init();
167 chip
->irq_unmask(data
);
169 /* Power down the core timer, just to play safe. */
This page took 0.034217 seconds and 6 git commands to generate.