arch/ia64/xen/xensetup.S

   1 /*
   2  * Support routines for Xen
   3  *
   4  * Copyright (C) 2005 Dan Magenheimer <dan.magenheimer@hp.com>
   5  */
   6
   7 #include <asm/processor.h>
   8 #include <asm/asmmacro.h>
   9 #include <asm/pgtable.h>
  10 #include <asm/system.h>
  11 #include <asm/paravirt.h>
  12 #include <asm/xen/privop.h>
  13 #include <linux/elfnote.h>
  14 #include <linux/init.h>
  15 #include <xen/interface/elfnote.h>
  16
  17         .section .data..read_mostly
  18         .align 8
  19         .global xen_domain_type
  20 xen_domain_type:
  21         data4 XEN_NATIVE_ASM
  22         .previous
  23
  24         __INIT
  25 ENTRY(startup_xen)
  26         // Calculate load offset.
  27         // The constant, LOAD_OFFSET, can't be used because the boot
  28         // loader doesn't always load to the LMA specified by the vmlinux.lds.
  29         mov r9=ip       // must be the first instruction to make sure
  30                         // that r9 = the physical address of startup_xen.
  31                         // Usually r9 = startup_xen - LOAD_OFFSET
  32         movl r8=startup_xen
  33         ;;
  34         sub r9=r9,r8    // Usually r9 = -LOAD_OFFSET.
  35
  36         mov r10=PARAVIRT_HYPERVISOR_TYPE_XEN
  37         movl r11=_start
  38         ;;
  39         add r11=r11,r9
  40         movl r8=hypervisor_type
  41         ;;
  42         add r8=r8,r9
  43         mov b0=r11
  44         ;;
  45         st8 [r8]=r10
  46         br.cond.sptk.many b0
  47         ;;
  48 END(startup_xen)
  49
  50         ELFNOTE(Xen, XEN_ELFNOTE_GUEST_OS,      .asciz "linux")
  51         ELFNOTE(Xen, XEN_ELFNOTE_GUEST_VERSION, .asciz "2.6")
  52         ELFNOTE(Xen, XEN_ELFNOTE_XEN_VERSION,   .asciz "xen-3.0")
  53         ELFNOTE(Xen, XEN_ELFNOTE_ENTRY,         data8.ua startup_xen - LOAD_OFFSET)
  54
  55 #define isBP    p3      // are we the Bootstrap Processor?
  56
  57 GLOBAL_ENTRY(xen_setup_hook)
  58         mov r8=XEN_PV_DOMAIN_ASM
  59 (isBP)  movl r9=xen_domain_type;;
  60 (isBP)  st4 [r9]=r8
  61         movl r10=xen_ivt;;
  62
  63         mov cr.iva=r10
  64
  65         /* Set xsi base.  */
  66 #define FW_HYPERCALL_SET_SHARED_INFO_VA                 0x600
  67 (isBP)  mov r2=FW_HYPERCALL_SET_SHARED_INFO_VA
  68 (isBP)  movl r28=XSI_BASE;;
  69 (isBP)  break 0x1000;;
  70
  71         /* setup pv_ops */
  72 (isBP)  mov r4=rp
  73         ;;
  74 (isBP)  br.call.sptk.many rp=xen_setup_pv_ops
  75         ;;
  76 (isBP)  mov rp=r4
  77         ;;
  78
  79         br.ret.sptk.many rp
  80         ;;
  81 END(xen_setup_hook)