arch/m32r/kernel/head.S

   1 /*
   2  *  linux/arch/m32r/kernel/head.S
   3  *
   4  *  M32R startup code.
   5  *
   6  *  Copyright (c) 2001, 2002  Hiroyuki Kondo, Hirokazu Takata,
   7  *                            Hitoshi Yamamoto
   8  */
   9
  10 #include <linux/init.h>
  11 __INIT
  12 __INITDATA
  13
  14         .text
  15 #include <linux/linkage.h>
  16 #include <asm/segment.h>
  17 #include <asm/page.h>
  18 #include <asm/pgtable.h>
  19 #include <asm/assembler.h>
  20 #include <asm/m32r.h>
  21 #include <asm/mmu_context.h>
  22
  23 /*
  24  * References to members of the boot_cpu_data structure.
  25  */
  26 __HEAD
  27         .global start_kernel
  28         .global __bss_start
  29         .global _end
  30 ENTRY(stext)
  31 ENTRY(_stext)
  32         /* Setup up the stack pointer */
  33         LDIMM   (r0, spi_stack_top)
  34         LDIMM   (r1, spu_stack_top)
  35         mvtc    r0, spi
  36         mvtc    r1, spu
  37
  38         /* Initilalize PSW */
  39         ldi     r0, #0x0000             /* use SPI, disable EI */
  40         mvtc    r0, psw
  41
  42         /* Set up the stack pointer */
  43         LDIMM   (r0, stack_start)
  44         ld      r0, @r0
  45         mvtc    r0, spi
  46
  47 /*
  48  * Clear BSS first so that there are no surprises...
  49  */
  50 #ifdef CONFIG_ISA_DUAL_ISSUE
  51
  52         LDIMM   (r2, __bss_start)
  53         LDIMM   (r3, _end)
  54         sub     r3, r2          ; BSS size in bytes
  55         ; R4 = BSS size in longwords (rounded down)
  56         mv      r4, r3              ||  ldi     r1, #0
  57         srli    r4, #4              ||  addi    r2, #-4
  58         beqz    r4, .Lendloop1
  59 .Lloop1:
  60 #ifndef CONFIG_CHIP_M32310
  61         ; Touch memory for the no-write-allocating cache.
  62         ld      r0, @(4,r2)
  63 #endif
  64         st      r1, @+r2            ||  addi    r4, #-1
  65         st      r1, @+r2
  66         st      r1, @+r2
  67         st      r1, @+r2            ||  cmpeq   r1, r4  ; R4 = 0?
  68         bnc     .Lloop1
  69 .Lendloop1:
  70         and3    r4, r3, #15
  71         addi    r2, #4
  72         beqz    r4, .Lendloop2
  73 .Lloop2:
  74         stb     r1, @r2             ||  addi    r4, #-1
  75         addi    r2, #1
  76         bnez    r4, .Lloop2
  77 .Lendloop2:
  78
  79 #else /* not CONFIG_ISA_DUAL_ISSUE */
  80
  81         LDIMM   (r2, __bss_start)
  82         LDIMM   (r3, _end)
  83         sub     r3, r2          ; BSS size in bytes
  84         mv      r4, r3
  85         srli    r4, #2          ; R4 = BSS size in longwords (rounded down)
  86         ldi     r1, #0          ; clear R1 for longwords store
  87         addi    r2, #-4         ; account for pre-inc store
  88         beqz    r4, .Lendloop1  ; any more to go?
  89 .Lloop1:
  90         st      r1, @+r2        ; yep, zero out another longword
  91         addi    r4, #-1         ; decrement count
  92         bnez    r4, .Lloop1     ; go do some more
  93 .Lendloop1:
  94         and3    r4, r3, #3      ; get no. of remaining BSS bytes to clear
  95         addi    r2, #4          ; account for pre-inc store
  96         beqz    r4, .Lendloop2  ; any more to go?
  97 .Lloop2:
  98         stb     r1, @r2         ; yep, zero out another byte
  99         addi    r2, #1          ; bump address
 100         addi    r4, #-1         ; decrement count
 101         bnez    r4, .Lloop2     ; go do some more
 102 .Lendloop2:
 103
 104 #endif /* not CONFIG_ISA_DUAL_ISSUE */
 105
 106 #if 0  /* M32R_FIXME */
 107 /*
 108  * Copy data segment from ROM to RAM.
 109  */
 110         .global ROM_D, TOP_DATA, END_DATA
 111
 112         LDIMM   (r1, ROM_D)
 113         LDIMM   (r2, TOP_DATA)
 114         LDIMM   (r3, END_DATA)
 115         addi    r2, #-4
 116         addi    r3, #-4
 117 loop1:
 118         ld      r0, @r1+
 119         st      r0, @+r2
 120         cmp     r2, r3
 121         bc      loop1
 122 #endif /* 0 */
 123
 124 /* Jump to kernel */
 125         LDIMM   (r2, start_kernel)
 126         jl      r2
 127         .fillinsn
 128 1:
 129         bra     1b              ; main should never return here, but
 130                                 ; just in case, we know what happens.
 131
 132 #ifdef CONFIG_SMP
 133 /*
 134  * AP startup routine
 135  */
 136         .global eit_vector
 137 ENTRY(startup_AP)
 138 ;; setup EVB
 139         LDIMM  (r4, eit_vector)
 140         mvtc   r4, cr5
 141
 142 ;; enable MMU
 143         LDIMM   (r2, init_tlb)
 144         jl      r2
 145         seth  r4, #high(MATM)
 146         or3   r4, r4, #low(MATM)
 147         ldi   r5, #0x01
 148         st    r5, @r4            ; Set MATM Reg(T bit ON)
 149         ld    r6, @r4            ; MATM Check
 150         LDIMM (r5, 1f)
 151         jmp   r5                 ; enable MMU
 152         nop
 153         .fillinsn
 154 1:
 155 ;; ISN check
 156         ld    r6, @r4            ; MATM Check
 157         seth  r4, #high(M32R_ICU_ISTS_ADDR)
 158         or3   r4, r4, #low(M32R_ICU_ISTS_ADDR)
 159         ld    r5, @r4           ; Read ISTSi reg.
 160         mv    r6, r5
 161         slli  r5, #13  ; PIML check
 162         srli  r5, #13  ;
 163         seth  r4, #high(M32R_ICU_IMASK_ADDR)
 164         or3   r4, r4, #low(M32R_ICU_IMASK_ADDR)
 165         st    r5, @r4           ; Write IMASKi reg.
 166         slli  r6, #4   ; ISN check
 167         srli  r6, #26  ;
 168         seth  r4, #high(M32R_IRQ_IPI5)
 169         or3   r4, r4, #low(M32R_IRQ_IPI5)
 170         bne   r4, r6, 2f  ; if (ISN != CPU_BOOT_IPI) goto sleep;
 171
 172 ;; check cpu_bootout_map and set cpu_bootin_map
 173         LDIMM (r4, cpu_bootout_map)
 174         ld    r4, @r4
 175         seth  r5, #high(M32R_CPUID_PORTL)
 176         or3   r5, r5, #low(M32R_CPUID_PORTL)
 177         ld    r5, @r5
 178         ldi   r6, #1
 179         sll   r6, r5
 180         and   r4, r6
 181         beqz  r4, 2f
 182         LDIMM (r4, cpu_bootin_map)
 183         ld    r5, @r4
 184         or    r5, r6
 185         st    r6, @r4
 186
 187 ;; clear PSW
 188         ldi   r4, #0
 189         mvtc  r4, psw
 190
 191 ;; setup SPI
 192         LDIMM (r4, stack_start)
 193         ld    r4, @r4
 194         mvtc  r4, spi
 195
 196 ;; setup BPC (start_secondary)
 197         LDIMM (r4, start_secondary)
 198         mvtc  r4, bpc
 199
 200         rte  ; goto startup_secondary
 201         nop
 202         nop
 203
 204         .fillinsn
 205 2:
 206         ;; disable MMU
 207         seth  r4, #high(MATM)
 208         or3   r4, r4, #low(MATM)
 209         ldi   r5, #0
 210         st    r5, @r4            ; Set MATM Reg(T bit OFF)
 211         ld    r6, @r4            ; MATM Check
 212         LDIMM (r4, 3f)
 213         seth  r5, #high(__PAGE_OFFSET)
 214         or3   r5, r5, #low(__PAGE_OFFSET)
 215         not   r5, r5
 216         and   r4, r5
 217         jmp   r4                 ; disable MMU
 218         nop
 219         .fillinsn
 220 3:
 221         ;; SLEEP and wait IPI
 222         LDIMM (r4, AP_loop)
 223         seth  r5, #high(__PAGE_OFFSET)
 224         or3   r5, r5, #low(__PAGE_OFFSET)
 225         not   r5, r5
 226         and   r4, r5
 227         jmp   r4
 228         nop
 229         nop
 230 #endif  /* CONFIG_SMP */
 231
 232         .text
 233 ENTRY(stack_start)
 234         .long   init_thread_union+8192
 235         .long   __KERNEL_DS
 236
 237 /*
 238  * This is initialized to create a identity-mapping at 0-4M (for bootup
 239  * purposes) and another mapping of the 0-4M area at virtual address
 240  * PAGE_OFFSET.
 241  */
 242         .text
 243
 244 #define  MOUNT_ROOT_RDONLY    1
 245 #define  RAMDISK_FLAGS        0         ; 1024KB
 246 #define  ORIG_ROOT_DEV        0x0100    ; /dev/ram0 (major:01, minor:00)
 247 #define  LOADER_TYPE          1         ; (??? - non-zero value seems
 248                                         ; to be needed to boot from initrd)
 249
 250 #define  COMMAND_LINE ""
 251
 252         .section        .empty_zero_page, "aw"
 253 ENTRY(empty_zero_page)
 254         .long   MOUNT_ROOT_RDONLY               /* offset: +0x00 */
 255         .long   RAMDISK_FLAGS
 256         .long   ORIG_ROOT_DEV
 257         .long   LOADER_TYPE
 258         .long   0       /* INITRD_START */      /* +0x10 */
 259         .long   0       /* INITRD_SIZE */
 260         .long   0       /* CPU_CLOCK */
 261         .long   0       /* BUS_CLOCK */
 262         .long   0       /* TIMER_DIVIDE */      /* +0x20 */
 263         .balign 256,0
 264         .asciz  COMMAND_LINE
 265         .byte   0
 266         .balign 4096,0,4096
 267
 268 /*------------------------------------------------------------------------
 269  * Stack area
 270  */
 271         .section .init.data, "aw"
 272         ALIGN
 273         .global spi_stack_top
 274         .zero   1024
 275 spi_stack_top:
 276
 277         .section .init.data, "aw"
 278         ALIGN
 279         .global spu_stack_top
 280         .zero   1024
 281 spu_stack_top:
 282
 283         .end