arch/mips/kernel/smp-bmips.c

   1 /*
   2  * This file is subject to the terms and conditions of the GNU General Public
   3  * License.  See the file "COPYING" in the main directory of this archive
   4  * for more details.
   5  *
   6  * Copyright (C) 2011 by Kevin Cernekee (cernekee@gmail.com)
   7  *
   8  * SMP support for BMIPS
   9  */
  10
  11 #include <linux/init.h>
  12 #include <linux/sched.h>
  13 #include <linux/mm.h>
  14 #include <linux/delay.h>
  15 #include <linux/smp.h>
  16 #include <linux/interrupt.h>
  17 #include <linux/spinlock.h>
  18 #include <linux/cpu.h>
  19 #include <linux/cpumask.h>
  20 #include <linux/reboot.h>
  21 #include <linux/io.h>
  22 #include <linux/compiler.h>
  23 #include <linux/linkage.h>
  24 #include <linux/bug.h>
  25 #include <linux/kernel.h>
  26
  27 #include <asm/time.h>
  28 #include <asm/pgtable.h>
  29 #include <asm/processor.h>
  30 #include <asm/bootinfo.h>
  31 #include <asm/pmon.h>
  32 #include <asm/cacheflush.h>
  33 #include <asm/tlbflush.h>
  34 #include <asm/mipsregs.h>
  35 #include <asm/bmips.h>
  36 #include <asm/traps.h>
  37 #include <asm/barrier.h>
  38
  39 static int __maybe_unused max_cpus = 1;
  40
  41 /* these may be configured by the platform code */
  42 int bmips_smp_enabled = 1;
  43 int bmips_cpu_offset;
  44 cpumask_t bmips_booted_mask;
  45
  46 #ifdef CONFIG_SMP
  47
  48 /* initial $sp, $gp - used by arch/mips/kernel/bmips_vec.S */
  49 unsigned long bmips_smp_boot_sp;
  50 unsigned long bmips_smp_boot_gp;
  51
  52 static void bmips43xx_send_ipi_single(int cpu, unsigned int action);
  53 static void bmips5000_send_ipi_single(int cpu, unsigned int action);
  54 static irqreturn_t bmips43xx_ipi_interrupt(int irq, void *dev_id);
  55 static irqreturn_t bmips5000_ipi_interrupt(int irq, void *dev_id);
  56
  57 /* SW interrupts 0,1 are used for interprocessor signaling */
  58 #define IPI0_IRQ                        (MIPS_CPU_IRQ_BASE + 0)
  59 #define IPI1_IRQ                        (MIPS_CPU_IRQ_BASE + 1)
  60
  61 #define CPUNUM(cpu, shift)              (((cpu) + bmips_cpu_offset) << (shift))
  62 #define ACTION_CLR_IPI(cpu, ipi)        (0x2000 | CPUNUM(cpu, 9) | ((ipi) << 8))
  63 #define ACTION_SET_IPI(cpu, ipi)        (0x3000 | CPUNUM(cpu, 9) | ((ipi) << 8))
  64 #define ACTION_BOOT_THREAD(cpu)         (0x08 | CPUNUM(cpu, 0))
  65
  66 static void __init bmips_smp_setup(void)
  67 {
  68         int i, cpu = 1, boot_cpu = 0;
  69         int cpu_hw_intr;
  70
  71         switch (current_cpu_type()) {
  72         case CPU_BMIPS4350:
  73         case CPU_BMIPS4380:
  74                 /* arbitration priority */
  75                 clear_c0_brcm_cmt_ctrl(0x30);
  76
  77                 /* NBK and weak order flags */
  78                 set_c0_brcm_config_0(0x30000);
  79
  80                 /* Find out if we are running on TP0 or TP1 */
  81                 boot_cpu = !!(read_c0_brcm_cmt_local() & (1 << 31));
  82
  83                 /*
  84                  * MIPS interrupts 0,1 (SW INT 0,1) cross over to the other
  85                  * thread
  86                  * MIPS interrupt 2 (HW INT 0) is the CPU0 L1 controller output
  87                  * MIPS interrupt 3 (HW INT 1) is the CPU1 L1 controller output
  88                  */
  89                 if (boot_cpu == 0)
  90                         cpu_hw_intr = 0x02;
  91                 else
  92                         cpu_hw_intr = 0x1d;
  93
  94                 change_c0_brcm_cmt_intr(0xf8018000,
  95                                         (cpu_hw_intr << 27) | (0x03 << 15));
  96
  97                 /* single core, 2 threads (2 pipelines) */
  98                 max_cpus = 2;
  99
 100                 break;
 101         case CPU_BMIPS5000:
 102                 /* enable raceless SW interrupts */
 103                 set_c0_brcm_config(0x03 << 22);
 104
 105                 /* route HW interrupt 0 to CPU0, HW interrupt 1 to CPU1 */
 106                 change_c0_brcm_mode(0x1f << 27, 0x02 << 27);
 107
 108                 /* N cores, 2 threads per core */
 109                 max_cpus = (((read_c0_brcm_config() >> 6) & 0x03) + 1) << 1;
 110
 111                 /* clear any pending SW interrupts */
 112                 for (i = 0; i < max_cpus; i++) {
 113                         write_c0_brcm_action(ACTION_CLR_IPI(i, 0));
 114                         write_c0_brcm_action(ACTION_CLR_IPI(i, 1));
 115                 }
 116
 117                 break;
 118         default:
 119                 max_cpus = 1;
 120         }
 121
 122         if (!bmips_smp_enabled)
 123                 max_cpus = 1;
 124
 125         /* this can be overridden by the BSP */
 126         if (!board_ebase_setup)
 127                 board_ebase_setup = &bmips_ebase_setup;
 128
 129         __cpu_number_map[boot_cpu] = 0;
 130         __cpu_logical_map[0] = boot_cpu;
 131
 132         for (i = 0; i < max_cpus; i++) {
 133                 if (i != boot_cpu) {
 134                         __cpu_number_map[i] = cpu;
 135                         __cpu_logical_map[cpu] = i;
 136                         cpu++;
 137                 }
 138                 set_cpu_possible(i, 1);
 139                 set_cpu_present(i, 1);
 140         }
 141 }
 142
 143 /*
 144  * IPI IRQ setup - runs on CPU0
 145  */
 146 static void bmips_prepare_cpus(unsigned int max_cpus)
 147 {
 148         irqreturn_t (*bmips_ipi_interrupt)(int irq, void *dev_id);
 149
 150         switch (current_cpu_type()) {
 151         case CPU_BMIPS4350:
 152         case CPU_BMIPS4380:
 153                 bmips_ipi_interrupt = bmips43xx_ipi_interrupt;
 154                 break;
 155         case CPU_BMIPS5000:
 156                 bmips_ipi_interrupt = bmips5000_ipi_interrupt;
 157                 break;
 158         default:
 159                 return;
 160         }
 161
 162         if (request_irq(IPI0_IRQ, bmips_ipi_interrupt, IRQF_PERCPU,
 163                         "smp_ipi0", NULL))
 164                 panic("Can't request IPI0 interrupt");
 165         if (request_irq(IPI1_IRQ, bmips_ipi_interrupt, IRQF_PERCPU,
 166                         "smp_ipi1", NULL))
 167                 panic("Can't request IPI1 interrupt");
 168 }
 169
 170 /*
 171  * Tell the hardware to boot CPUx - runs on CPU0
 172  */
 173 static void bmips_boot_secondary(int cpu, struct task_struct *idle)
 174 {
 175         bmips_smp_boot_sp = __KSTK_TOS(idle);
 176         bmips_smp_boot_gp = (unsigned long)task_thread_info(idle);
 177         mb();
 178
 179         /*
 180          * Initial boot sequence for secondary CPU:
 181          *   bmips_reset_nmi_vec @ a000_0000 ->
 182          *   bmips_smp_entry ->
 183          *   plat_wired_tlb_setup (cached function call; optional) ->
 184          *   start_secondary (cached jump)
 185          *
 186          * Warm restart sequence:
 187          *   play_dead WAIT loop ->
 188          *   bmips_smp_int_vec @ BMIPS_WARM_RESTART_VEC ->
 189          *   eret to play_dead ->
 190          *   bmips_secondary_reentry ->
 191          *   start_secondary
 192          */
 193
 194         pr_info("SMP: Booting CPU%d...\n", cpu);
 195
 196         if (cpumask_test_cpu(cpu, &bmips_booted_mask)) {
 197                 switch (current_cpu_type()) {
 198                 case CPU_BMIPS4350:
 199                 case CPU_BMIPS4380:
 200                         bmips43xx_send_ipi_single(cpu, 0);
 201                         break;
 202                 case CPU_BMIPS5000:
 203                         bmips5000_send_ipi_single(cpu, 0);
 204                         break;
 205                 }
 206         }
 207         else {
 208                 switch (current_cpu_type()) {
 209                 case CPU_BMIPS4350:
 210                 case CPU_BMIPS4380:
 211                         /* Reset slave TP1 if booting from TP0 */
 212                         if (cpu_logical_map(cpu) == 1)
 213                                 set_c0_brcm_cmt_ctrl(0x01);
 214                         break;
 215                 case CPU_BMIPS5000:
 216                         if (cpu & 0x01)
 217                                 write_c0_brcm_action(ACTION_BOOT_THREAD(cpu));
 218                         else {
 219                                 /*
 220                                  * core N thread 0 was already booted; just
 221                                  * pulse the NMI line
 222                                  */
 223                                 bmips_write_zscm_reg(0x210, 0xc0000000);
 224                                 udelay(10);
 225                                 bmips_write_zscm_reg(0x210, 0x00);
 226                         }
 227                         break;
 228                 }
 229                 cpumask_set_cpu(cpu, &bmips_booted_mask);
 230         }
 231 }
 232
 233 /*
 234  * Early setup - runs on secondary CPU after cache probe
 235  */
 236 static void bmips_init_secondary(void)
 237 {
 238         /* move NMI vector to kseg0, in case XKS01 is enabled */
 239
 240         void __iomem *cbr;
 241         unsigned long old_vec;
 242         unsigned long relo_vector;
 243         int boot_cpu;
 244
 245         switch (current_cpu_type()) {
 246         case CPU_BMIPS4350:
 247         case CPU_BMIPS4380:
 248                 cbr = BMIPS_GET_CBR();
 249
 250                 boot_cpu = !!(read_c0_brcm_cmt_local() & (1 << 31));
 251                 relo_vector = boot_cpu ? BMIPS_RELO_VECTOR_CONTROL_0 :
 252                                   BMIPS_RELO_VECTOR_CONTROL_1;
 253
 254                 old_vec = __raw_readl(cbr + relo_vector);
 255                 __raw_writel(old_vec & ~0x20000000, cbr + relo_vector);
 256
 257                 clear_c0_cause(smp_processor_id() ? C_SW1 : C_SW0);
 258                 break;
 259         case CPU_BMIPS5000:
 260                 write_c0_brcm_bootvec(read_c0_brcm_bootvec() &
 261                         (smp_processor_id() & 0x01 ? ~0x20000000 : ~0x2000));
 262
 263                 write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), 0));
 264                 break;
 265         }
 266 }
 267
 268 /*
 269  * Late setup - runs on secondary CPU before entering the idle loop
 270  */
 271 static void bmips_smp_finish(void)
 272 {
 273         pr_info("SMP: CPU%d is running\n", smp_processor_id());
 274
 275         /* make sure there won't be a timer interrupt for a little while */
 276         write_c0_compare(read_c0_count() + mips_hpt_frequency / HZ);
 277
 278         irq_enable_hazard();
 279         set_c0_status(IE_SW0 | IE_SW1 | IE_IRQ1 | IE_IRQ5 | ST0_IE);
 280         irq_enable_hazard();
 281 }
 282
 283 /*
 284  * BMIPS5000 raceless IPIs
 285  *
 286  * Each CPU has two inbound SW IRQs which are independent of all other CPUs.
 287  * IPI0 is used for SMP_RESCHEDULE_YOURSELF
 288  * IPI1 is used for SMP_CALL_FUNCTION
 289  */
 290
 291 static void bmips5000_send_ipi_single(int cpu, unsigned int action)
 292 {
 293         write_c0_brcm_action(ACTION_SET_IPI(cpu, action == SMP_CALL_FUNCTION));
 294 }
 295
 296 static irqreturn_t bmips5000_ipi_interrupt(int irq, void *dev_id)
 297 {
 298         int action = irq - IPI0_IRQ;
 299
 300         write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), action));
 301
 302         if (action == 0)
 303                 scheduler_ipi();
 304         else
 305                 smp_call_function_interrupt();
 306
 307         return IRQ_HANDLED;
 308 }
 309
 310 static void bmips5000_send_ipi_mask(const struct cpumask *mask,
 311         unsigned int action)
 312 {
 313         unsigned int i;
 314
 315         for_each_cpu(i, mask)
 316                 bmips5000_send_ipi_single(i, action);
 317 }
 318
 319 /*
 320  * BMIPS43xx racey IPIs
 321  *
 322  * We use one inbound SW IRQ for each CPU.
 323  *
 324  * A spinlock must be held in order to keep CPUx from accidentally clearing
 325  * an incoming IPI when it writes CP0 CAUSE to raise an IPI on CPUy.  The
 326  * same spinlock is used to protect the action masks.
 327  */
 328
 329 static DEFINE_SPINLOCK(ipi_lock);
 330 static DEFINE_PER_CPU(int, ipi_action_mask);
 331
 332 static void bmips43xx_send_ipi_single(int cpu, unsigned int action)
 333 {
 334         unsigned long flags;
 335
 336         spin_lock_irqsave(&ipi_lock, flags);
 337         set_c0_cause(cpu ? C_SW1 : C_SW0);
 338         per_cpu(ipi_action_mask, cpu) |= action;
 339         irq_enable_hazard();
 340         spin_unlock_irqrestore(&ipi_lock, flags);
 341 }
 342
 343 static irqreturn_t bmips43xx_ipi_interrupt(int irq, void *dev_id)
 344 {
 345         unsigned long flags;
 346         int action, cpu = irq - IPI0_IRQ;
 347
 348         spin_lock_irqsave(&ipi_lock, flags);
 349         action = __get_cpu_var(ipi_action_mask);
 350         per_cpu(ipi_action_mask, cpu) = 0;
 351         clear_c0_cause(cpu ? C_SW1 : C_SW0);
 352         spin_unlock_irqrestore(&ipi_lock, flags);
 353
 354         if (action & SMP_RESCHEDULE_YOURSELF)
 355                 scheduler_ipi();
 356         if (action & SMP_CALL_FUNCTION)
 357                 smp_call_function_interrupt();
 358
 359         return IRQ_HANDLED;
 360 }
 361
 362 static void bmips43xx_send_ipi_mask(const struct cpumask *mask,
 363         unsigned int action)
 364 {
 365         unsigned int i;
 366
 367         for_each_cpu(i, mask)
 368                 bmips43xx_send_ipi_single(i, action);
 369 }
 370
 371 #ifdef CONFIG_HOTPLUG_CPU
 372
 373 static int bmips_cpu_disable(void)
 374 {
 375         unsigned int cpu = smp_processor_id();
 376
 377         if (cpu == 0)
 378                 return -EBUSY;
 379
 380         pr_info("SMP: CPU%d is offline\n", cpu);
 381
 382         set_cpu_online(cpu, false);
 383         cpu_clear(cpu, cpu_callin_map);
 384
 385         local_flush_tlb_all();
 386         local_flush_icache_range(0, ~0);
 387
 388         return 0;
 389 }
 390
 391 static void bmips_cpu_die(unsigned int cpu)
 392 {
 393 }
 394
 395 void __ref play_dead(void)
 396 {
 397         idle_task_exit();
 398
 399         /* flush data cache */
 400         _dma_cache_wback_inv(0, ~0);
 401
 402         /*
 403          * Wakeup is on SW0 or SW1; disable everything else
 404          * Use BEV !IV (BMIPS_WARM_RESTART_VEC) to avoid the regular Linux
 405          * IRQ handlers; this clears ST0_IE and returns immediately.
 406          */
 407         clear_c0_cause(CAUSEF_IV | C_SW0 | C_SW1);
 408         change_c0_status(IE_IRQ5 | IE_IRQ1 | IE_SW0 | IE_SW1 | ST0_IE | ST0_BEV,
 409                 IE_SW0 | IE_SW1 | ST0_IE | ST0_BEV);
 410         irq_disable_hazard();
 411
 412         /*
 413          * wait for SW interrupt from bmips_boot_secondary(), then jump
 414          * back to start_secondary()
 415          */
 416         __asm__ __volatile__(
 417         "       wait\n"
 418         "       j       bmips_secondary_reentry\n"
 419         : : : "memory");
 420 }
 421
 422 #endif /* CONFIG_HOTPLUG_CPU */
 423
 424 struct plat_smp_ops bmips43xx_smp_ops = {
 425         .smp_setup              = bmips_smp_setup,
 426         .prepare_cpus           = bmips_prepare_cpus,
 427         .boot_secondary         = bmips_boot_secondary,
 428         .smp_finish             = bmips_smp_finish,
 429         .init_secondary         = bmips_init_secondary,
 430         .send_ipi_single        = bmips43xx_send_ipi_single,
 431         .send_ipi_mask          = bmips43xx_send_ipi_mask,
 432 #ifdef CONFIG_HOTPLUG_CPU
 433         .cpu_disable            = bmips_cpu_disable,
 434         .cpu_die                = bmips_cpu_die,
 435 #endif
 436 };
 437
 438 struct plat_smp_ops bmips5000_smp_ops = {
 439         .smp_setup              = bmips_smp_setup,
 440         .prepare_cpus           = bmips_prepare_cpus,
 441         .boot_secondary         = bmips_boot_secondary,
 442         .smp_finish             = bmips_smp_finish,
 443         .init_secondary         = bmips_init_secondary,
 444         .send_ipi_single        = bmips5000_send_ipi_single,
 445         .send_ipi_mask          = bmips5000_send_ipi_mask,
 446 #ifdef CONFIG_HOTPLUG_CPU
 447         .cpu_disable            = bmips_cpu_disable,
 448         .cpu_die                = bmips_cpu_die,
 449 #endif
 450 };
 451
 452 #endif /* CONFIG_SMP */
 453
 454 /***********************************************************************
 455  * BMIPS vector relocation
 456  * This is primarily used for SMP boot, but it is applicable to some
 457  * UP BMIPS systems as well.
 458  ***********************************************************************/
 459
 460 static void bmips_wr_vec(unsigned long dst, char *start, char *end)
 461 {
 462         memcpy((void *)dst, start, end - start);
 463         dma_cache_wback((unsigned long)start, end - start);
 464         local_flush_icache_range(dst, dst + (end - start));
 465         instruction_hazard();
 466 }
 467
 468 static inline void bmips_nmi_handler_setup(void)
 469 {
 470         bmips_wr_vec(BMIPS_NMI_RESET_VEC, &bmips_reset_nmi_vec,
 471                 &bmips_reset_nmi_vec_end);
 472         bmips_wr_vec(BMIPS_WARM_RESTART_VEC, &bmips_smp_int_vec,
 473                 &bmips_smp_int_vec_end);
 474 }
 475
 476 void bmips_ebase_setup(void)
 477 {
 478         unsigned long new_ebase = ebase;
 479         void __iomem __maybe_unused *cbr;
 480
 481         BUG_ON(ebase != CKSEG0);
 482
 483         switch (current_cpu_type()) {
 484         case CPU_BMIPS4350:
 485                 /*
 486                  * BMIPS4350 cannot relocate the normal vectors, but it
 487                  * can relocate the BEV=1 vectors.  So CPU1 starts up at
 488                  * the relocated BEV=1, IV=0 general exception vector @
 489                  * 0xa000_0380.
 490                  *
 491                  * set_uncached_handler() is used here because:
 492                  *  - CPU1 will run this from uncached space
 493                  *  - None of the cacheflush functions are set up yet
 494                  */
 495                 set_uncached_handler(BMIPS_WARM_RESTART_VEC - CKSEG0,
 496                         &bmips_smp_int_vec, 0x80);
 497                 __sync();
 498                 return;
 499         case CPU_BMIPS4380:
 500                 /*
 501                  * 0x8000_0000: reset/NMI (initially in kseg1)
 502                  * 0x8000_0400: normal vectors
 503                  */
 504                 new_ebase = 0x80000400;
 505                 cbr = BMIPS_GET_CBR();
 506                 __raw_writel(0x80080800, cbr + BMIPS_RELO_VECTOR_CONTROL_0);
 507                 __raw_writel(0xa0080800, cbr + BMIPS_RELO_VECTOR_CONTROL_1);
 508                 break;
 509         case CPU_BMIPS5000:
 510                 /*
 511                  * 0x8000_0000: reset/NMI (initially in kseg1)
 512                  * 0x8000_1000: normal vectors
 513                  */
 514                 new_ebase = 0x80001000;
 515                 write_c0_brcm_bootvec(0xa0088008);
 516                 write_c0_ebase(new_ebase);
 517                 if (max_cpus > 2)
 518                         bmips_write_zscm_reg(0xa0, 0xa008a008);
 519                 break;
 520         default:
 521                 return;
 522         }
 523
 524         board_nmi_handler_setup = &bmips_nmi_handler_setup;
 525         ebase = new_ebase;
 526 }
 527
 528 asmlinkage void __weak plat_wired_tlb_setup(void)
 529 {
 530         /*
 531          * Called when starting/restarting a secondary CPU.
 532          * Kernel stacks and other important data might only be accessible
 533          * once the wired entries are present.
 534          */
 535 }