Merge tag 'tty-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
[deliverable/linux.git] / arch / mips / kernel / vmlinux.lds.S
1 #include <asm/asm-offsets.h>
2 #include <asm/thread_info.h>
3
4 #define PAGE_SIZE _PAGE_SIZE
5
6 /*
7 * Put .bss..swapper_pg_dir as the first thing in .bss. This will
8 * ensure that it has .bss alignment (64K).
9 */
10 #define BSS_FIRST_SECTIONS *(.bss..swapper_pg_dir)
11
12 #include <asm-generic/vmlinux.lds.h>
13
14 #undef mips
15 #define mips mips
16 OUTPUT_ARCH(mips)
17 ENTRY(kernel_entry)
18 PHDRS {
19 text PT_LOAD FLAGS(7); /* RWX */
20 #ifndef CONFIG_CAVIUM_OCTEON_SOC
21 note PT_NOTE FLAGS(4); /* R__ */
22 #endif /* CAVIUM_OCTEON_SOC */
23 }
24
25 #ifdef CONFIG_32BIT
26 #ifdef CONFIG_CPU_LITTLE_ENDIAN
27 jiffies = jiffies_64;
28 #else
29 jiffies = jiffies_64 + 4;
30 #endif
31 #else
32 jiffies = jiffies_64;
33 #endif
34
35 SECTIONS
36 {
37 #ifdef CONFIG_BOOT_ELF64
38 /* Read-only sections, merged into text segment: */
39 /* . = 0xc000000000000000; */
40
41 /* This is the value for an Origin kernel, taken from an IRIX kernel. */
42 /* . = 0xc00000000001c000; */
43
44 /* Set the vaddr for the text segment to a value
45 * >= 0xa800 0000 0001 9000 if no symmon is going to configured
46 * >= 0xa800 0000 0030 0000 otherwise
47 */
48
49 /* . = 0xa800000000300000; */
50 . = 0xffffffff80300000;
51 #endif
52 . = VMLINUX_LOAD_ADDRESS;
53 /* read-only */
54 _text = .; /* Text and read-only data */
55 .text : {
56 TEXT_TEXT
57 SCHED_TEXT
58 LOCK_TEXT
59 KPROBES_TEXT
60 IRQENTRY_TEXT
61 SOFTIRQENTRY_TEXT
62 *(.text.*)
63 *(.fixup)
64 *(.gnu.warning)
65 } :text = 0
66 _etext = .; /* End of text section */
67
68 EXCEPTION_TABLE(16)
69
70 /* Exception table for data bus errors */
71 __dbe_table : {
72 __start___dbe_table = .;
73 *(__dbe_table)
74 __stop___dbe_table = .;
75 }
76
77 #ifdef CONFIG_CAVIUM_OCTEON_SOC
78 #define NOTES_HEADER
79 #else /* CONFIG_CAVIUM_OCTEON_SOC */
80 #define NOTES_HEADER :note
81 #endif /* CONFIG_CAVIUM_OCTEON_SOC */
82 NOTES :text NOTES_HEADER
83 .dummy : { *(.dummy) } :text
84
85 _sdata = .; /* Start of data section */
86 RODATA
87
88 /* writeable */
89 .data : { /* Data */
90 . = . + DATAOFFSET; /* for CONFIG_MAPPED_KERNEL */
91
92 INIT_TASK_DATA(THREAD_SIZE)
93 NOSAVE_DATA
94 CACHELINE_ALIGNED_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
95 READ_MOSTLY_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
96 DATA_DATA
97 CONSTRUCTORS
98 }
99 _gp = . + 0x8000;
100 .lit8 : {
101 *(.lit8)
102 }
103 .lit4 : {
104 *(.lit4)
105 }
106 /* We want the small data sections together, so single-instruction offsets
107 can access them all, and initialized data all before uninitialized, so
108 we can shorten the on-disk segment size. */
109 .sdata : {
110 *(.sdata)
111 }
112 _edata = .; /* End of data section */
113
114 /* will be freed after init */
115 . = ALIGN(PAGE_SIZE); /* Init code and data */
116 __init_begin = .;
117 INIT_TEXT_SECTION(PAGE_SIZE)
118 INIT_DATA_SECTION(16)
119
120 . = ALIGN(4);
121 .mips.machines.init : AT(ADDR(.mips.machines.init) - LOAD_OFFSET) {
122 __mips_machines_start = .;
123 *(.mips.machines.init)
124 __mips_machines_end = .;
125 }
126
127 /* .exit.text is discarded at runtime, not link time, to deal with
128 * references from .rodata
129 */
130 .exit.text : {
131 EXIT_TEXT
132 }
133 .exit.data : {
134 EXIT_DATA
135 }
136 #ifdef CONFIG_SMP
137 PERCPU_SECTION(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
138 #endif
139
140 #ifdef CONFIG_RELOCATABLE
141 . = ALIGN(4);
142
143 .data.reloc : {
144 _relocation_start = .;
145 /*
146 * Space for relocation table
147 * This needs to be filled so that the
148 * relocs tool can overwrite the content.
149 * An invalid value is left at the start of the
150 * section to abort relocation if the table
151 * has not been filled in.
152 */
153 LONG(0xFFFFFFFF);
154 FILL(0);
155 . += CONFIG_RELOCATION_TABLE_SIZE - 4;
156 _relocation_end = .;
157 }
158 #endif
159
160 #ifdef CONFIG_MIPS_RAW_APPENDED_DTB
161 __appended_dtb = .;
162 /* leave space for appended DTB */
163 . += 0x100000;
164 #elif defined(CONFIG_MIPS_ELF_APPENDED_DTB)
165 .appended_dtb : AT(ADDR(.appended_dtb) - LOAD_OFFSET) {
166 *(.appended_dtb)
167 KEEP(*(.appended_dtb))
168 }
169 #endif
170 /*
171 * Align to 64K in attempt to eliminate holes before the
172 * .bss..swapper_pg_dir section at the start of .bss. This
173 * also satisfies PAGE_SIZE alignment as the largest page size
174 * allowed is 64K.
175 */
176 . = ALIGN(0x10000);
177 __init_end = .;
178 /* freed after init ends here */
179
180 /*
181 * Force .bss to 64K alignment so that .bss..swapper_pg_dir
182 * gets that alignment. .sbss should be empty, so there will be
183 * no holes after __init_end. */
184 BSS_SECTION(0, 0x10000, 0)
185
186 _end = . ;
187
188 /* These mark the ABI of the kernel for debuggers. */
189 .mdebug.abi32 : {
190 KEEP(*(.mdebug.abi32))
191 }
192 .mdebug.abi64 : {
193 KEEP(*(.mdebug.abi64))
194 }
195
196 /* This is the MIPS specific mdebug section. */
197 .mdebug : {
198 *(.mdebug)
199 }
200
201 STABS_DEBUG
202 DWARF_DEBUG
203
204 /* These must appear regardless of . */
205 .gptab.sdata : {
206 *(.gptab.data)
207 *(.gptab.sdata)
208 }
209 .gptab.sbss : {
210 *(.gptab.bss)
211 *(.gptab.sbss)
212 }
213
214 /* Sections to be discarded */
215 DISCARDS
216 /DISCARD/ : {
217 /* ABI crap starts here */
218 *(.MIPS.abiflags)
219 *(.MIPS.options)
220 *(.options)
221 *(.pdr)
222 *(.reginfo)
223 *(.eh_frame)
224 }
225 }
This page took 0.062635 seconds and 5 git commands to generate.