arch/powerpc/boot/cuboot-pq2.c

   1 /*
   2  * Old U-boot compatibility for PowerQUICC II
   3  * (a.k.a. 82xx with CPM, not the 8240 family of chips)
   4  *
   5  * Author: Scott Wood <scottwood@freescale.com>
   6  *
   7  * Copyright (c) 2007 Freescale Semiconductor, Inc.
   8  *
   9  * This program is free software; you can redistribute it and/or modify it
  10  * under the terms of the GNU General Public License version 2 as published
  11  * by the Free Software Foundation.
  12  */
  13
  14 #include "ops.h"
  15 #include "stdio.h"
  16 #include "cuboot.h"
  17 #include "io.h"
  18 #include "fsl-soc.h"
  19
  20 #define TARGET_CPM2
  21 #define TARGET_HAS_ETH1
  22 #include "ppcboot.h"
  23
  24 static bd_t bd;
  25
  26 struct cs_range {
  27         u32 csnum;
  28         u32 base; /* must be zero */
  29         u32 addr;
  30         u32 size;
  31 };
  32
  33 struct pci_range {
  34         u32 flags;
  35         u32 pci_addr[2];
  36         u32 phys_addr;
  37         u32 size[2];
  38 };
  39
  40 struct cs_range cs_ranges_buf[MAX_PROP_LEN / sizeof(struct cs_range)];
  41 struct pci_range pci_ranges_buf[MAX_PROP_LEN / sizeof(struct pci_range)];
  42
  43 /* Different versions of u-boot put the BCSR in different places, and
  44  * some don't set up the PCI PIC at all, so we assume the device tree is
  45  * sane and update the BRx registers appropriately.
  46  *
  47  * For any node defined as compatible with fsl,pq2-localbus,
  48  * #address/#size must be 2/1 for the localbus, and 1/1 for the parent bus.
  49  * Ranges must be for whole chip selects.
  50  */
  51 static void update_cs_ranges(void)
  52 {
  53         void *bus_node, *parent_node;
  54         u32 *ctrl_addr;
  55         unsigned long ctrl_size;
  56         u32 naddr, nsize;
  57         int len;
  58         int i;
  59
  60         bus_node = finddevice("/localbus");
  61         if (!bus_node || !dt_is_compatible(bus_node, "fsl,pq2-localbus"))
  62                 return;
  63
  64         dt_get_reg_format(bus_node, &naddr, &nsize);
  65         if (naddr != 2 || nsize != 1)
  66                 goto err;
  67
  68         parent_node = get_parent(bus_node);
  69         if (!parent_node)
  70                 goto err;
  71
  72         dt_get_reg_format(parent_node, &naddr, &nsize);
  73         if (naddr != 1 || nsize != 1)
  74                 goto err;
  75
  76         if (!dt_xlate_reg(bus_node, 0, (unsigned long *)&ctrl_addr,
  77                           &ctrl_size))
  78                 goto err;
  79
  80         len = getprop(bus_node, "ranges", cs_ranges_buf, sizeof(cs_ranges_buf));
  81
  82         for (i = 0; i < len / sizeof(struct cs_range); i++) {
  83                 u32 base, option;
  84                 int cs = cs_ranges_buf[i].csnum;
  85                 if (cs >= ctrl_size / 8)
  86                         goto err;
  87
  88                 if (cs_ranges_buf[i].base != 0)
  89                         goto err;
  90
  91                 base = in_be32(&ctrl_addr[cs * 2]);
  92
  93                 /* If CS is already valid, use the existing flags.
  94                  * Otherwise, guess a sane default.
  95                  */
  96                 if (base & 1) {
  97                         base &= 0x7fff;
  98                         option = in_be32(&ctrl_addr[cs * 2 + 1]) & 0x7fff;
  99                 } else {
 100                         base = 0x1801;
 101                         option = 0x10;
 102                 }
 103
 104                 out_be32(&ctrl_addr[cs * 2], 0);
 105                 out_be32(&ctrl_addr[cs * 2 + 1],
 106                          option | ~(cs_ranges_buf[i].size - 1));
 107                 out_be32(&ctrl_addr[cs * 2], base | cs_ranges_buf[i].addr);
 108         }
 109
 110         return;
 111
 112 err:
 113         printf("Bad /localbus node\r\n");
 114 }
 115
 116 /* Older u-boots don't set PCI up properly.  Update the hardware to match
 117  * the device tree.  The prefetch mem region and non-prefetch mem region
 118  * must be contiguous in the host bus.  As required by the PCI binding,
 119  * PCI #addr/#size must be 3/2.  The parent bus must be 1/1.  Only
 120  * 32-bit PCI is supported.  All three region types (prefetchable mem,
 121  * non-prefetchable mem, and I/O) must be present.
 122  */
 123 static void fixup_pci(void)
 124 {
 125         struct pci_range *mem = NULL, *mmio = NULL,
 126                          *io = NULL, *mem_base = NULL;
 127         u32 *pci_regs[3];
 128         u8 *soc_regs;
 129         int i, len;
 130         void *node, *parent_node;
 131         u32 naddr, nsize, mem_log2;
 132
 133         node = finddevice("/pci");
 134         if (!node || !dt_is_compatible(node, "fsl,pq2-pci"))
 135                 return;
 136
 137         for (i = 0; i < 3; i++)
 138                 if (!dt_xlate_reg(node, i,
 139                                   (unsigned long *)&pci_regs[i], NULL))
 140                         goto err;
 141
 142         soc_regs = (u8 *)fsl_get_immr();
 143         if (!soc_regs)
 144                 goto err;
 145
 146         dt_get_reg_format(node, &naddr, &nsize);
 147         if (naddr != 3 || nsize != 2)
 148                 goto err;
 149
 150         parent_node = get_parent(node);
 151         if (!parent_node)
 152                 goto err;
 153
 154         dt_get_reg_format(parent_node, &naddr, &nsize);
 155         if (naddr != 1 || nsize != 1)
 156                 goto err;
 157
 158         len = getprop(node, "ranges", pci_ranges_buf,
 159                       sizeof(pci_ranges_buf));
 160
 161         for (i = 0; i < len / sizeof(struct pci_range); i++) {
 162                 u32 flags = pci_ranges_buf[i].flags & 0x43000000;
 163
 164                 if (flags == 0x42000000)
 165                         mem = &pci_ranges_buf[i];
 166                 else if (flags == 0x02000000)
 167                         mmio = &pci_ranges_buf[i];
 168                 else if (flags == 0x01000000)
 169                         io = &pci_ranges_buf[i];
 170         }
 171
 172         if (!mem || !mmio || !io)
 173                 goto err;
 174
 175         if (mem->phys_addr + mem->size[1] == mmio->phys_addr)
 176                 mem_base = mem;
 177         else if (mmio->phys_addr + mmio->size[1] == mem->phys_addr)
 178                 mem_base = mmio;
 179         else
 180                 goto err;
 181
 182         out_be32(&pci_regs[1][0], mem_base->phys_addr | 1);
 183         out_be32(&pci_regs[2][0], ~(mem->size[1] + mmio->size[1] - 1));
 184
 185         out_be32(&pci_regs[1][1], io->phys_addr | 1);
 186         out_be32(&pci_regs[2][1], ~(io->size[1] - 1));
 187
 188         out_le32(&pci_regs[0][0], mem->pci_addr[1] >> 12);
 189         out_le32(&pci_regs[0][2], mem->phys_addr >> 12);
 190         out_le32(&pci_regs[0][4], (~(mem->size[1] - 1) >> 12) | 0xa0000000);
 191
 192         out_le32(&pci_regs[0][6], mmio->pci_addr[1] >> 12);
 193         out_le32(&pci_regs[0][8], mmio->phys_addr >> 12);
 194         out_le32(&pci_regs[0][10], (~(mmio->size[1] - 1) >> 12) | 0x80000000);
 195
 196         out_le32(&pci_regs[0][12], io->pci_addr[1] >> 12);
 197         out_le32(&pci_regs[0][14], io->phys_addr >> 12);
 198         out_le32(&pci_regs[0][16], (~(io->size[1] - 1) >> 12) | 0xc0000000);
 199
 200         /* Inbound translation */
 201         out_le32(&pci_regs[0][58], 0);
 202         out_le32(&pci_regs[0][60], 0);
 203
 204         mem_log2 = 1 << (__ilog2_u32(bd.bi_memsize - 1) + 1);
 205         out_le32(&pci_regs[0][62], 0xa0000000 | ~((1 << (mem_log2 - 12)) - 1));
 206
 207         /* If PCI is disabled, drive RST high to enable. */
 208         if (!(in_le32(&pci_regs[0][32]) & 1)) {
 209                  /* Tpvrh (Power valid to RST# high) 100 ms */
 210                 udelay(100000);
 211
 212                 out_le32(&pci_regs[0][32], 1);
 213
 214                 /* Trhfa (RST# high to first cfg access) 2^25 clocks */
 215                 udelay(1020000);
 216         }
 217
 218         /* Enable bus master and memory access */
 219         out_le32(&pci_regs[0][64], 0x80000004);
 220         out_le32(&pci_regs[0][65], in_le32(&pci_regs[0][65]) | 6);
 221
 222         /* Park the bus on PCI, and elevate PCI's arbitration priority,
 223          * as required by section 9.6 of the user's manual.
 224          */
 225         out_8(&soc_regs[0x10028], 3);
 226         out_be32((u32 *)&soc_regs[0x1002c], 0x01236745);
 227
 228         return;
 229
 230 err:
 231         printf("Bad PCI node\r\n");
 232 }
 233
 234 static void pq2_platform_fixups(void)
 235 {
 236         void *node;
 237
 238         dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
 239         dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr);
 240         dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 4, bd.bi_busfreq);
 241
 242         node = finddevice("/soc/cpm");
 243         if (node)
 244                 setprop(node, "clock-frequency", &bd.bi_cpmfreq, 4);
 245
 246         node = finddevice("/soc/cpm/brg");
 247         if (node)
 248                 setprop(node, "clock-frequency",  &bd.bi_brgfreq, 4);
 249
 250         update_cs_ranges();
 251         fixup_pci();
 252 }
 253
 254 void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 255                    unsigned long r6, unsigned long r7)
 256 {
 257         CUBOOT_INIT();
 258         ft_init(_dtb_start, _dtb_end - _dtb_start, 32);
 259         serial_console_init();
 260         platform_ops.fixups = pq2_platform_fixups;
 261 }