b0eeff036de339e6f31083342898a20e4b0d0eff
[deliverable/linux.git] / arch / powerpc / boot / dts / kuroboxHD.dts
1 /*
2 * Device Tree Souce for Buffalo KuroboxHD
3 *
4 * Choose CONFIG_LINKSTATION to build a kernel for KuroboxHD, or use
5 * the default configuration linkstation_defconfig.
6 *
7 * Based on sandpoint.dts
8 *
9 * 2006 (c) G. Liakhovetski <g.liakhovetski@gmx.de>
10 *
11 * This file is licensed under
12 * the terms of the GNU General Public License version 2. This program
13 * is licensed "as is" without any warranty of any kind, whether express
14 * or implied.
15
16 XXXX add flash parts, rtc, ??
17
18 */
19
20 / {
21 model = "KuroboxHD";
22 compatible = "linkstation";
23 #address-cells = <1>;
24 #size-cells = <1>;
25
26 cpus {
27 #address-cells = <1>;
28 #size-cells = <0>;
29
30 PowerPC,603e { /* Really 8241 */
31 device_type = "cpu";
32 reg = <0>;
33 clock-frequency = <bebc200>; /* Fixed by bootloader */
34 timebase-frequency = <1743000>; /* Fixed by bootloader */
35 bus-frequency = <0>; /* Fixed by bootloader */
36 /* Following required by dtc but not used */
37 i-cache-size = <4000>;
38 d-cache-size = <4000>;
39 };
40 };
41
42 memory {
43 device_type = "memory";
44 reg = <00000000 04000000>;
45 };
46
47 soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */
48 #address-cells = <1>;
49 #size-cells = <1>;
50 #interrupt-cells = <2>;
51 device_type = "soc";
52 compatible = "mpc10x";
53 store-gathering = <0>; /* 0 == off, !0 == on */
54 reg = <80000000 00100000>;
55 ranges = <80000000 80000000 70000000 /* pci mem space */
56 fc000000 fc000000 00100000 /* EUMB */
57 fe000000 fe000000 00c00000 /* pci i/o space */
58 fec00000 fec00000 00300000 /* pci cfg regs */
59 fef00000 fef00000 00100000>; /* pci iack */
60
61 i2c@80003000 {
62 #address-cells = <1>;
63 #size-cells = <0>;
64 device_type = "i2c";
65 compatible = "fsl-i2c";
66 reg = <80003000 1000>;
67 interrupts = <5 2>;
68 interrupt-parent = <&mpic>;
69
70 rtc@32 {
71 device_type = "rtc";
72 compatible = "ricoh,rs5c372b";
73 reg = <32>;
74 };
75 };
76
77 serial@80004500 {
78 device_type = "serial";
79 compatible = "ns16550";
80 reg = <80004500 8>;
81 clock-frequency = <5d08d88>;
82 current-speed = <2580>;
83 interrupts = <9 2>;
84 interrupt-parent = <&mpic>;
85 };
86
87 serial@80004600 {
88 device_type = "serial";
89 compatible = "ns16550";
90 reg = <80004600 8>;
91 clock-frequency = <5d08d88>;
92 current-speed = <e100>;
93 interrupts = <a 0>;
94 interrupt-parent = <&mpic>;
95 };
96
97 mpic: interrupt-controller@80040000 {
98 #interrupt-cells = <2>;
99 #address-cells = <0>;
100 device_type = "open-pic";
101 compatible = "chrp,open-pic";
102 interrupt-controller;
103 reg = <80040000 40000>;
104 built-in;
105 };
106
107 pci@fec00000 {
108 #address-cells = <3>;
109 #size-cells = <2>;
110 #interrupt-cells = <1>;
111 device_type = "pci";
112 compatible = "mpc10x-pci";
113 reg = <fec00000 400000>;
114 ranges = <01000000 0 0 fe000000 0 00c00000
115 02000000 0 80000000 80000000 0 70000000>;
116 bus-range = <0 ff>;
117 clock-frequency = <7f28155>;
118 interrupt-parent = <&mpic>;
119 interrupt-map-mask = <f800 0 0 7>;
120 interrupt-map = <
121 /* IDSEL 11 - IRQ0 ETH */
122 5800 0 0 1 &mpic 0 1
123 5800 0 0 2 &mpic 1 1
124 5800 0 0 3 &mpic 2 1
125 5800 0 0 4 &mpic 3 1
126 /* IDSEL 12 - IRQ1 IDE0 */
127 6000 0 0 1 &mpic 1 1
128 6000 0 0 2 &mpic 2 1
129 6000 0 0 3 &mpic 3 1
130 6000 0 0 4 &mpic 0 1
131 /* IDSEL 14 - IRQ3 USB2.0 */
132 7000 0 0 1 &mpic 3 1
133 7000 0 0 2 &mpic 3 1
134 7000 0 0 3 &mpic 3 1
135 7000 0 0 4 &mpic 3 1
136 >;
137 };
138 };
139 };
This page took 0.032763 seconds and 4 git commands to generate.