arch/powerpc/boot/dts/tqm5200.dts

   1 /*
   2  * TQM5200 board Device Tree Source
   3  *
   4  * Copyright (C) 2007 Semihalf
   5  * Marian Balakowicz <m8@semihalf.com>
   6  *
   7  * This program is free software; you can redistribute  it and/or modify it
   8  * under  the terms of  the GNU General  Public License as published by the
   9  * Free Software Foundation;  either version 2 of the  License, or (at your
  10  * option) any later version.
  11  */
  12
  13 /dts-v1/;
  14
  15 / {
  16         model = "tqc,tqm5200";
  17         compatible = "tqc,tqm5200";
  18         #address-cells = <1>;
  19         #size-cells = <1>;
  20         interrupt-parent = <&mpc5200_pic>;
  21
  22         cpus {
  23                 #address-cells = <1>;
  24                 #size-cells = <0>;
  25
  26                 PowerPC,5200@0 {
  27                         device_type = "cpu";
  28                         reg = <0>;
  29                         d-cache-line-size = <32>;
  30                         i-cache-line-size = <32>;
  31                         d-cache-size = <0x4000>;        // L1, 16K
  32                         i-cache-size = <0x4000>;        // L1, 16K
  33                         timebase-frequency = <0>;       // from bootloader
  34                         bus-frequency = <0>;            // from bootloader
  35                         clock-frequency = <0>;          // from bootloader
  36                 };
  37         };
  38
  39         memory {
  40                 device_type = "memory";
  41                 reg = <0x00000000 0x04000000>;  // 64MB
  42         };
  43
  44         soc5200@f0000000 {
  45                 #address-cells = <1>;
  46                 #size-cells = <1>;
  47                 compatible = "fsl,mpc5200-immr";
  48                 ranges = <0 0xf0000000 0x0000c000>;
  49                 reg = <0xf0000000 0x00000100>;
  50                 bus-frequency = <0>;            // from bootloader
  51                 system-frequency = <0>;         // from bootloader
  52
  53                 cdm@200 {
  54                         compatible = "fsl,mpc5200-cdm";
  55                         reg = <0x200 0x38>;
  56                 };
  57
  58                 mpc5200_pic: interrupt-controller@500 {
  59                         // 5200 interrupts are encoded into two levels;
  60                         interrupt-controller;
  61                         #interrupt-cells = <3>;
  62                         compatible = "fsl,mpc5200-pic";
  63                         reg = <0x500 0x80>;
  64                 };
  65
  66                 timer@600 {     // General Purpose Timer
  67                         compatible = "fsl,mpc5200-gpt";
  68                         reg = <0x600 0x10>;
  69                         interrupts = <1 9 0>;
  70                         fsl,has-wdt;
  71                 };
  72
  73                 can@900 {
  74                         compatible = "fsl,mpc5200-mscan";
  75                         interrupts = <2 17 0>;
  76                         reg = <0x900 0x80>;
  77                 };
  78
  79                 can@980 {
  80                         compatible = "fsl,mpc5200-mscan";
  81                         interrupts = <2 18 0>;
  82                         reg = <0x980 0x80>;
  83                 };
  84
  85                 gpio_simple: gpio@b00 {
  86                         compatible = "fsl,mpc5200-gpio";
  87                         reg = <0xb00 0x40>;
  88                         interrupts = <1 7 0>;
  89                         gpio-controller;
  90                         #gpio-cells = <2>;
  91                 };
  92
  93                 usb@1000 {
  94                         compatible = "fsl,mpc5200-ohci","ohci-be";
  95                         reg = <0x1000 0xff>;
  96                         interrupts = <2 6 0>;
  97                 };
  98
  99                 dma-controller@1200 {
 100                         compatible = "fsl,mpc5200-bestcomm";
 101                         reg = <0x1200 0x80>;
 102                         interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
 103                                       3 4 0  3 5 0  3 6 0  3 7 0
 104                                       3 8 0  3 9 0  3 10 0  3 11 0
 105                                       3 12 0  3 13 0  3 14 0  3 15 0>;
 106                 };
 107
 108                 xlb@1f00 {
 109                         compatible = "fsl,mpc5200-xlb";
 110                         reg = <0x1f00 0x100>;
 111                 };
 112
 113                 serial@2000 {           // PSC1
 114                         compatible = "fsl,mpc5200-psc-uart";
 115                         reg = <0x2000 0x100>;
 116                         interrupts = <2 1 0>;
 117                 };
 118
 119                 serial@2200 {           // PSC2
 120                         compatible = "fsl,mpc5200-psc-uart";
 121                         reg = <0x2200 0x100>;
 122                         interrupts = <2 2 0>;
 123                 };
 124
 125                 serial@2400 {           // PSC3
 126                         compatible = "fsl,mpc5200-psc-uart";
 127                         reg = <0x2400 0x100>;
 128                         interrupts = <2 3 0>;
 129                 };
 130
 131                 ethernet@3000 {
 132                         compatible = "fsl,mpc5200-fec";
 133                         reg = <0x3000 0x400>;
 134                         local-mac-address = [ 00 00 00 00 00 00 ];
 135                         interrupts = <2 5 0>;
 136                         phy-handle = <&phy0>;
 137                 };
 138
 139                 mdio@3000 {
 140                         #address-cells = <1>;
 141                         #size-cells = <0>;
 142                         compatible = "fsl,mpc5200-mdio";
 143                         reg = <0x3000 0x400>;       // fec range, since we need to setup fec interrupts
 144                         interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
 145
 146                         phy0: ethernet-phy@0 {
 147                                 reg = <0>;
 148                         };
 149                 };
 150
 151                 ata@3a00 {
 152                         compatible = "fsl,mpc5200-ata";
 153                         reg = <0x3a00 0x100>;
 154                         interrupts = <2 7 0>;
 155                 };
 156
 157                 i2c@3d40 {
 158                         #address-cells = <1>;
 159                         #size-cells = <0>;
 160                         compatible = "fsl,mpc5200-i2c","fsl-i2c";
 161                         reg = <0x3d40 0x40>;
 162                         interrupts = <2 16 0>;
 163
 164                          rtc@68 {
 165                                 compatible = "dallas,ds1307";
 166                                 reg = <0x68>;
 167                         };
 168                 };
 169
 170                 sram@8000 {
 171                         compatible = "fsl,mpc5200-sram";
 172                         reg = <0x8000 0x4000>;
 173                 };
 174         };
 175
 176         localbus {
 177                 compatible = "fsl,mpc5200-lpb","simple-bus";
 178                 #address-cells = <2>;
 179                 #size-cells = <1>;
 180                 ranges = <0 0 0xfc000000 0x02000000>;
 181
 182                 flash@0,0 {
 183                         compatible = "cfi-flash";
 184                         reg = <0 0 0x02000000>;
 185                         bank-width = <4>;
 186                         device-width = <2>;
 187                         #size-cells = <1>;
 188                         #address-cells = <1>;
 189                 };
 190         };
 191
 192         pci@f0000d00 {
 193                 #interrupt-cells = <1>;
 194                 #size-cells = <2>;
 195                 #address-cells = <3>;
 196                 device_type = "pci";
 197                 compatible = "fsl,mpc5200-pci";
 198                 reg = <0xf0000d00 0x100>;
 199                 interrupt-map-mask = <0xf800 0 0 7>;
 200                 interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3
 201                                  0xc000 0 0 2 &mpc5200_pic 0 0 3
 202                                  0xc000 0 0 3 &mpc5200_pic 0 0 3
 203                                  0xc000 0 0 4 &mpc5200_pic 0 0 3>;
 204                 clock-frequency = <0>; // From boot loader
 205                 interrupts = <2 8 0 2 9 0 2 10 0>;
 206                 bus-range = <0 0>;
 207                 ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
 208                           0x02000000 0 0x90000000 0x90000000 0 0x10000000
 209                           0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
 210         };
 211 };