arch/powerpc/kernel/setup_32.c

   1 /*
   2  * Common prep/pmac/chrp boot and setup code.
   3  */
   4
   5 #include <linux/module.h>
   6 #include <linux/string.h>
   7 #include <linux/sched.h>
   8 #include <linux/init.h>
   9 #include <linux/kernel.h>
  10 #include <linux/reboot.h>
  11 #include <linux/delay.h>
  12 #include <linux/initrd.h>
  13 #include <linux/tty.h>
  14 #include <linux/bootmem.h>
  15 #include <linux/seq_file.h>
  16 #include <linux/root_dev.h>
  17 #include <linux/cpu.h>
  18 #include <linux/console.h>
  19 #include <linux/memblock.h>
  20
  21 #include <asm/io.h>
  22 #include <asm/prom.h>
  23 #include <asm/processor.h>
  24 #include <asm/pgtable.h>
  25 #include <asm/setup.h>
  26 #include <asm/smp.h>
  27 #include <asm/elf.h>
  28 #include <asm/cputable.h>
  29 #include <asm/bootx.h>
  30 #include <asm/btext.h>
  31 #include <asm/machdep.h>
  32 #include <asm/uaccess.h>
  33 #include <asm/pmac_feature.h>
  34 #include <asm/sections.h>
  35 #include <asm/nvram.h>
  36 #include <asm/xmon.h>
  37 #include <asm/time.h>
  38 #include <asm/serial.h>
  39 #include <asm/udbg.h>
  40 #include <asm/mmu_context.h>
  41 #include <asm/epapr_hcalls.h>
  42
  43 #include "setup.h"
  44
  45 #define DBG(fmt...)
  46
  47 extern void bootx_init(unsigned long r4, unsigned long phys);
  48
  49 int boot_cpuid = -1;
  50 EXPORT_SYMBOL_GPL(boot_cpuid);
  51 int boot_cpuid_phys;
  52 EXPORT_SYMBOL_GPL(boot_cpuid_phys);
  53
  54 int smp_hw_index[NR_CPUS];
  55
  56 unsigned long ISA_DMA_THRESHOLD;
  57 unsigned int DMA_MODE_READ;
  58 unsigned int DMA_MODE_WRITE;
  59
  60 #ifdef CONFIG_VGA_CONSOLE
  61 unsigned long vgacon_remap_base;
  62 EXPORT_SYMBOL(vgacon_remap_base);
  63 #endif
  64
  65 /*
  66  * These are used in binfmt_elf.c to put aux entries on the stack
  67  * for each elf executable being started.
  68  */
  69 int dcache_bsize;
  70 int icache_bsize;
  71 int ucache_bsize;
  72
  73 /*
  74  * We're called here very early in the boot.  We determine the machine
  75  * type and call the appropriate low-level setup functions.
  76  *  -- Cort <cort@fsmlabs.com>
  77  *
  78  * Note that the kernel may be running at an address which is different
  79  * from the address that it was linked at, so we must use RELOC/PTRRELOC
  80  * to access static data (including strings).  -- paulus
  81  */
  82 notrace unsigned long __init early_init(unsigned long dt_ptr)
  83 {
  84         unsigned long offset = reloc_offset();
  85         struct cpu_spec *spec;
  86
  87         /* First zero the BSS -- use memset_io, some platforms don't have
  88          * caches on yet */
  89         memset_io((void __iomem *)PTRRELOC(&__bss_start), 0,
  90                         __bss_stop - __bss_start);
  91
  92         /*
  93          * Identify the CPU type and fix up code sections
  94          * that depend on which cpu we have.
  95          */
  96         spec = identify_cpu(offset, mfspr(SPRN_PVR));
  97
  98         do_feature_fixups(spec->cpu_features,
  99                           PTRRELOC(&__start___ftr_fixup),
 100                           PTRRELOC(&__stop___ftr_fixup));
 101
 102         do_feature_fixups(spec->mmu_features,
 103                           PTRRELOC(&__start___mmu_ftr_fixup),
 104                           PTRRELOC(&__stop___mmu_ftr_fixup));
 105
 106         do_lwsync_fixups(spec->cpu_features,
 107                          PTRRELOC(&__start___lwsync_fixup),
 108                          PTRRELOC(&__stop___lwsync_fixup));
 109
 110         do_final_fixups();
 111
 112         return KERNELBASE + offset;
 113 }
 114
 115
 116 /*
 117  * Find out what kind of machine we're on and save any data we need
 118  * from the early boot process (devtree is copied on pmac by prom_init()).
 119  * This is called very early on the boot process, after a minimal
 120  * MMU environment has been set up but before MMU_init is called.
 121  */
 122 notrace void __init machine_init(u64 dt_ptr)
 123 {
 124         lockdep_init();
 125
 126         /* Enable early debugging if any specified (see udbg.h) */
 127         udbg_early_init();
 128
 129         /* Do some early initialization based on the flat device tree */
 130         early_init_devtree(__va(dt_ptr));
 131
 132         epapr_paravirt_early_init();
 133
 134         early_init_mmu();
 135
 136         probe_machine();
 137
 138         setup_kdump_trampoline();
 139
 140 #ifdef CONFIG_6xx
 141         if (cpu_has_feature(CPU_FTR_CAN_DOZE) ||
 142             cpu_has_feature(CPU_FTR_CAN_NAP))
 143                 ppc_md.power_save = ppc6xx_idle;
 144 #endif
 145
 146 #ifdef CONFIG_E500
 147         if (cpu_has_feature(CPU_FTR_CAN_DOZE) ||
 148             cpu_has_feature(CPU_FTR_CAN_NAP))
 149                 ppc_md.power_save = e500_idle;
 150 #endif
 151         if (ppc_md.progress)
 152                 ppc_md.progress("id mach(): done", 0x200);
 153 }
 154
 155 /* Checks "l2cr=xxxx" command-line option */
 156 int __init ppc_setup_l2cr(char *str)
 157 {
 158         if (cpu_has_feature(CPU_FTR_L2CR)) {
 159                 unsigned long val = simple_strtoul(str, NULL, 0);
 160                 printk(KERN_INFO "l2cr set to %lx\n", val);
 161                 _set_L2CR(0);           /* force invalidate by disable cache */
 162                 _set_L2CR(val);         /* and enable it */
 163         }
 164         return 1;
 165 }
 166 __setup("l2cr=", ppc_setup_l2cr);
 167
 168 /* Checks "l3cr=xxxx" command-line option */
 169 int __init ppc_setup_l3cr(char *str)
 170 {
 171         if (cpu_has_feature(CPU_FTR_L3CR)) {
 172                 unsigned long val = simple_strtoul(str, NULL, 0);
 173                 printk(KERN_INFO "l3cr set to %lx\n", val);
 174                 _set_L3CR(val);         /* and enable it */
 175         }
 176         return 1;
 177 }
 178 __setup("l3cr=", ppc_setup_l3cr);
 179
 180 #ifdef CONFIG_GENERIC_NVRAM
 181
 182 /* Generic nvram hooks used by drivers/char/gen_nvram.c */
 183 unsigned char nvram_read_byte(int addr)
 184 {
 185         if (ppc_md.nvram_read_val)
 186                 return ppc_md.nvram_read_val(addr);
 187         return 0xff;
 188 }
 189 EXPORT_SYMBOL(nvram_read_byte);
 190
 191 void nvram_write_byte(unsigned char val, int addr)
 192 {
 193         if (ppc_md.nvram_write_val)
 194                 ppc_md.nvram_write_val(addr, val);
 195 }
 196 EXPORT_SYMBOL(nvram_write_byte);
 197
 198 ssize_t nvram_get_size(void)
 199 {
 200         if (ppc_md.nvram_size)
 201                 return ppc_md.nvram_size();
 202         return -1;
 203 }
 204 EXPORT_SYMBOL(nvram_get_size);
 205
 206 void nvram_sync(void)
 207 {
 208         if (ppc_md.nvram_sync)
 209                 ppc_md.nvram_sync();
 210 }
 211 EXPORT_SYMBOL(nvram_sync);
 212
 213 #endif /* CONFIG_NVRAM */
 214
 215 int __init ppc_init(void)
 216 {
 217         /* clear the progress line */
 218         if (ppc_md.progress)
 219                 ppc_md.progress("             ", 0xffff);
 220
 221         /* call platform init */
 222         if (ppc_md.init != NULL) {
 223                 ppc_md.init();
 224         }
 225         return 0;
 226 }
 227
 228 arch_initcall(ppc_init);
 229
 230 static void __init irqstack_early_init(void)
 231 {
 232         unsigned int i;
 233
 234         /* interrupt stacks must be in lowmem, we get that for free on ppc32
 235          * as the memblock is limited to lowmem by default */
 236         for_each_possible_cpu(i) {
 237                 softirq_ctx[i] = (struct thread_info *)
 238                         __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 239                 hardirq_ctx[i] = (struct thread_info *)
 240                         __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 241         }
 242 }
 243
 244 #if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
 245 static void __init exc_lvl_early_init(void)
 246 {
 247         unsigned int i, hw_cpu;
 248
 249         /* interrupt stacks must be in lowmem, we get that for free on ppc32
 250          * as the memblock is limited to lowmem by MEMBLOCK_REAL_LIMIT */
 251         for_each_possible_cpu(i) {
 252                 hw_cpu = get_hard_smp_processor_id(i);
 253                 critirq_ctx[hw_cpu] = (struct thread_info *)
 254                         __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 255 #ifdef CONFIG_BOOKE
 256                 dbgirq_ctx[hw_cpu] = (struct thread_info *)
 257                         __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 258                 mcheckirq_ctx[hw_cpu] = (struct thread_info *)
 259                         __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 260 #endif
 261         }
 262 }
 263 #else
 264 #define exc_lvl_early_init()
 265 #endif
 266
 267 /* Warning, IO base is not yet inited */
 268 void __init setup_arch(char **cmdline_p)
 269 {
 270         *cmdline_p = cmd_line;
 271
 272         /* so udelay does something sensible, assume <= 1000 bogomips */
 273         loops_per_jiffy = 500000000 / HZ;
 274
 275         unflatten_device_tree();
 276         check_for_initrd();
 277
 278         if (ppc_md.init_early)
 279                 ppc_md.init_early();
 280
 281         find_legacy_serial_ports();
 282
 283         smp_setup_cpu_maps();
 284
 285         /* Register early console */
 286         register_early_udbg_console();
 287
 288         xmon_setup();
 289
 290         /*
 291          * Set cache line size based on type of cpu as a default.
 292          * Systems with OF can look in the properties on the cpu node(s)
 293          * for a possibly more accurate value.
 294          */
 295         dcache_bsize = cur_cpu_spec->dcache_bsize;
 296         icache_bsize = cur_cpu_spec->icache_bsize;
 297         ucache_bsize = 0;
 298         if (cpu_has_feature(CPU_FTR_UNIFIED_ID_CACHE))
 299                 ucache_bsize = icache_bsize = dcache_bsize;
 300
 301         /* reboot on panic */
 302         panic_timeout = 180;
 303
 304         if (ppc_md.panic)
 305                 setup_panic();
 306
 307         init_mm.start_code = (unsigned long)_stext;
 308         init_mm.end_code = (unsigned long) _etext;
 309         init_mm.end_data = (unsigned long) _edata;
 310         init_mm.brk = klimit;
 311
 312         exc_lvl_early_init();
 313
 314         irqstack_early_init();
 315
 316         /* set up the bootmem stuff with available memory */
 317         do_init_bootmem();
 318         if ( ppc_md.progress ) ppc_md.progress("setup_arch: bootmem", 0x3eab);
 319
 320 #ifdef CONFIG_DUMMY_CONSOLE
 321         conswitchp = &dummy_con;
 322 #endif
 323
 324         if (ppc_md.setup_arch)
 325                 ppc_md.setup_arch();
 326         if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab);
 327
 328         paging_init();
 329
 330         /* Initialize the MMU context management stuff */
 331         mmu_context_init();
 332 }