Merge branch 'master' into percpu
[deliverable/linux.git] / arch / powerpc / platforms / pseries / hotplug-cpu.c
1 /*
2 * pseries CPU Hotplug infrastructure.
3 *
4 * Split out from arch/powerpc/platforms/pseries/setup.c
5 * arch/powerpc/kernel/rtas.c, and arch/powerpc/platforms/pseries/smp.c
6 *
7 * Peter Bergner, IBM March 2001.
8 * Copyright (C) 2001 IBM.
9 * Dave Engebretsen, Peter Bergner, and
10 * Mike Corrigan {engebret|bergner|mikec}@us.ibm.com
11 * Plus various changes from other IBM teams...
12 *
13 * Copyright (C) 2006 Michael Ellerman, IBM Corporation
14 *
15 * This program is free software; you can redistribute it and/or
16 * modify it under the terms of the GNU General Public License
17 * as published by the Free Software Foundation; either version
18 * 2 of the License, or (at your option) any later version.
19 */
20
21 #include <linux/kernel.h>
22 #include <linux/delay.h>
23 #include <linux/cpu.h>
24 #include <asm/system.h>
25 #include <asm/prom.h>
26 #include <asm/rtas.h>
27 #include <asm/firmware.h>
28 #include <asm/machdep.h>
29 #include <asm/vdso_datapage.h>
30 #include <asm/pSeries_reconfig.h>
31 #include "xics.h"
32 #include "plpar_wrappers.h"
33 #include "offline_states.h"
34
35 /* This version can't take the spinlock, because it never returns */
36 static struct rtas_args rtas_stop_self_args = {
37 .token = RTAS_UNKNOWN_SERVICE,
38 .nargs = 0,
39 .nret = 1,
40 .rets = &rtas_stop_self_args.args[0],
41 };
42
43 static DEFINE_PER_CPU(enum cpu_state_vals, preferred_offline_state) =
44 CPU_STATE_OFFLINE;
45 static DEFINE_PER_CPU(enum cpu_state_vals, current_state) = CPU_STATE_OFFLINE;
46
47 static enum cpu_state_vals default_offline_state = CPU_STATE_OFFLINE;
48
49 static int cede_offline_enabled __read_mostly = 1;
50
51 /*
52 * Enable/disable cede_offline when available.
53 */
54 static int __init setup_cede_offline(char *str)
55 {
56 if (!strcmp(str, "off"))
57 cede_offline_enabled = 0;
58 else if (!strcmp(str, "on"))
59 cede_offline_enabled = 1;
60 else
61 return 0;
62 return 1;
63 }
64
65 __setup("cede_offline=", setup_cede_offline);
66
67 enum cpu_state_vals get_cpu_current_state(int cpu)
68 {
69 return per_cpu(current_state, cpu);
70 }
71
72 void set_cpu_current_state(int cpu, enum cpu_state_vals state)
73 {
74 per_cpu(current_state, cpu) = state;
75 }
76
77 enum cpu_state_vals get_preferred_offline_state(int cpu)
78 {
79 return per_cpu(preferred_offline_state, cpu);
80 }
81
82 void set_preferred_offline_state(int cpu, enum cpu_state_vals state)
83 {
84 per_cpu(preferred_offline_state, cpu) = state;
85 }
86
87 void set_default_offline_state(int cpu)
88 {
89 per_cpu(preferred_offline_state, cpu) = default_offline_state;
90 }
91
92 static void rtas_stop_self(void)
93 {
94 struct rtas_args *args = &rtas_stop_self_args;
95
96 local_irq_disable();
97
98 BUG_ON(args->token == RTAS_UNKNOWN_SERVICE);
99
100 printk("cpu %u (hwid %u) Ready to die...\n",
101 smp_processor_id(), hard_smp_processor_id());
102 enter_rtas(__pa(args));
103
104 panic("Alas, I survived.\n");
105 }
106
107 static void pseries_mach_cpu_die(void)
108 {
109 unsigned int cpu = smp_processor_id();
110 unsigned int hwcpu = hard_smp_processor_id();
111 u8 cede_latency_hint = 0;
112
113 local_irq_disable();
114 idle_task_exit();
115 xics_teardown_cpu();
116
117 if (get_preferred_offline_state(cpu) == CPU_STATE_INACTIVE) {
118 set_cpu_current_state(cpu, CPU_STATE_INACTIVE);
119 cede_latency_hint = 2;
120
121 get_lppaca()->idle = 1;
122 if (!get_lppaca()->shared_proc)
123 get_lppaca()->donate_dedicated_cpu = 1;
124
125 printk(KERN_INFO
126 "cpu %u (hwid %u) ceding for offline with hint %d\n",
127 cpu, hwcpu, cede_latency_hint);
128 while (get_preferred_offline_state(cpu) == CPU_STATE_INACTIVE) {
129 extended_cede_processor(cede_latency_hint);
130 printk(KERN_INFO "cpu %u (hwid %u) returned from cede.\n",
131 cpu, hwcpu);
132 printk(KERN_INFO
133 "Decrementer value = %x Timebase value = %llx\n",
134 get_dec(), get_tb());
135 }
136
137 printk(KERN_INFO "cpu %u (hwid %u) got prodded to go online\n",
138 cpu, hwcpu);
139
140 if (!get_lppaca()->shared_proc)
141 get_lppaca()->donate_dedicated_cpu = 0;
142 get_lppaca()->idle = 0;
143 }
144
145 if (get_preferred_offline_state(cpu) == CPU_STATE_ONLINE) {
146 unregister_slb_shadow(hwcpu, __pa(get_slb_shadow()));
147
148 /*
149 * NOTE: Calling start_secondary() here for now to
150 * start new context.
151 * However, need to do it cleanly by resetting the
152 * stack pointer.
153 */
154 start_secondary();
155
156 } else if (get_preferred_offline_state(cpu) == CPU_STATE_OFFLINE) {
157
158 set_cpu_current_state(cpu, CPU_STATE_OFFLINE);
159 unregister_slb_shadow(hard_smp_processor_id(),
160 __pa(get_slb_shadow()));
161 rtas_stop_self();
162 }
163
164 /* Should never get here... */
165 BUG();
166 for(;;);
167 }
168
169 static int qcss_tok; /* query-cpu-stopped-state token */
170
171 /* Get state of physical CPU.
172 * Return codes:
173 * 0 - The processor is in the RTAS stopped state
174 * 1 - stop-self is in progress
175 * 2 - The processor is not in the RTAS stopped state
176 * -1 - Hardware Error
177 * -2 - Hardware Busy, Try again later.
178 */
179 static int query_cpu_stopped(unsigned int pcpu)
180 {
181 int cpu_status, status;
182
183 status = rtas_call(qcss_tok, 1, 2, &cpu_status, pcpu);
184 if (status != 0) {
185 printk(KERN_ERR
186 "RTAS query-cpu-stopped-state failed: %i\n", status);
187 return status;
188 }
189
190 return cpu_status;
191 }
192
193 static int pseries_cpu_disable(void)
194 {
195 int cpu = smp_processor_id();
196
197 set_cpu_online(cpu, false);
198 vdso_data->processorCount--;
199
200 /*fix boot_cpuid here*/
201 if (cpu == boot_cpuid)
202 boot_cpuid = any_online_cpu(cpu_online_map);
203
204 /* FIXME: abstract this to not be platform specific later on */
205 xics_migrate_irqs_away();
206 return 0;
207 }
208
209 /*
210 * pseries_cpu_die: Wait for the cpu to die.
211 * @cpu: logical processor id of the CPU whose death we're awaiting.
212 *
213 * This function is called from the context of the thread which is performing
214 * the cpu-offline. Here we wait for long enough to allow the cpu in question
215 * to self-destroy so that the cpu-offline thread can send the CPU_DEAD
216 * notifications.
217 *
218 * OTOH, pseries_mach_cpu_die() is called by the @cpu when it wants to
219 * self-destruct.
220 */
221 static void pseries_cpu_die(unsigned int cpu)
222 {
223 int tries;
224 int cpu_status = 1;
225 unsigned int pcpu = get_hard_smp_processor_id(cpu);
226
227 if (get_preferred_offline_state(cpu) == CPU_STATE_INACTIVE) {
228 cpu_status = 1;
229 for (tries = 0; tries < 1000; tries++) {
230 if (get_cpu_current_state(cpu) == CPU_STATE_INACTIVE) {
231 cpu_status = 0;
232 break;
233 }
234 cpu_relax();
235 }
236 } else if (get_preferred_offline_state(cpu) == CPU_STATE_OFFLINE) {
237
238 for (tries = 0; tries < 25; tries++) {
239 cpu_status = query_cpu_stopped(pcpu);
240 if (cpu_status == 0 || cpu_status == -1)
241 break;
242 cpu_relax();
243 }
244 }
245
246 if (cpu_status != 0) {
247 printk("Querying DEAD? cpu %i (%i) shows %i\n",
248 cpu, pcpu, cpu_status);
249 }
250
251 /* Isolation and deallocation are definatly done by
252 * drslot_chrp_cpu. If they were not they would be
253 * done here. Change isolate state to Isolate and
254 * change allocation-state to Unusable.
255 */
256 paca[cpu].cpu_start = 0;
257 }
258
259 /*
260 * Update cpu_present_map and paca(s) for a new cpu node. The wrinkle
261 * here is that a cpu device node may represent up to two logical cpus
262 * in the SMT case. We must honor the assumption in other code that
263 * the logical ids for sibling SMT threads x and y are adjacent, such
264 * that x^1 == y and y^1 == x.
265 */
266 static int pseries_add_processor(struct device_node *np)
267 {
268 unsigned int cpu;
269 cpumask_t candidate_map, tmp = CPU_MASK_NONE;
270 int err = -ENOSPC, len, nthreads, i;
271 const u32 *intserv;
272
273 intserv = of_get_property(np, "ibm,ppc-interrupt-server#s", &len);
274 if (!intserv)
275 return 0;
276
277 nthreads = len / sizeof(u32);
278 for (i = 0; i < nthreads; i++)
279 cpu_set(i, tmp);
280
281 cpu_maps_update_begin();
282
283 BUG_ON(!cpus_subset(cpu_present_map, cpu_possible_map));
284
285 /* Get a bitmap of unoccupied slots. */
286 cpus_xor(candidate_map, cpu_possible_map, cpu_present_map);
287 if (cpus_empty(candidate_map)) {
288 /* If we get here, it most likely means that NR_CPUS is
289 * less than the partition's max processors setting.
290 */
291 printk(KERN_ERR "Cannot add cpu %s; this system configuration"
292 " supports %d logical cpus.\n", np->full_name,
293 cpus_weight(cpu_possible_map));
294 goto out_unlock;
295 }
296
297 while (!cpus_empty(tmp))
298 if (cpus_subset(tmp, candidate_map))
299 /* Found a range where we can insert the new cpu(s) */
300 break;
301 else
302 cpus_shift_left(tmp, tmp, nthreads);
303
304 if (cpus_empty(tmp)) {
305 printk(KERN_ERR "Unable to find space in cpu_present_map for"
306 " processor %s with %d thread(s)\n", np->name,
307 nthreads);
308 goto out_unlock;
309 }
310
311 for_each_cpu_mask(cpu, tmp) {
312 BUG_ON(cpu_isset(cpu, cpu_present_map));
313 set_cpu_present(cpu, true);
314 set_hard_smp_processor_id(cpu, *intserv++);
315 }
316 err = 0;
317 out_unlock:
318 cpu_maps_update_done();
319 return err;
320 }
321
322 /*
323 * Update the present map for a cpu node which is going away, and set
324 * the hard id in the paca(s) to -1 to be consistent with boot time
325 * convention for non-present cpus.
326 */
327 static void pseries_remove_processor(struct device_node *np)
328 {
329 unsigned int cpu;
330 int len, nthreads, i;
331 const u32 *intserv;
332
333 intserv = of_get_property(np, "ibm,ppc-interrupt-server#s", &len);
334 if (!intserv)
335 return;
336
337 nthreads = len / sizeof(u32);
338
339 cpu_maps_update_begin();
340 for (i = 0; i < nthreads; i++) {
341 for_each_present_cpu(cpu) {
342 if (get_hard_smp_processor_id(cpu) != intserv[i])
343 continue;
344 BUG_ON(cpu_online(cpu));
345 set_cpu_present(cpu, false);
346 set_hard_smp_processor_id(cpu, -1);
347 break;
348 }
349 if (cpu == NR_CPUS)
350 printk(KERN_WARNING "Could not find cpu to remove "
351 "with physical id 0x%x\n", intserv[i]);
352 }
353 cpu_maps_update_done();
354 }
355
356 static int pseries_smp_notifier(struct notifier_block *nb,
357 unsigned long action, void *node)
358 {
359 int err = NOTIFY_OK;
360
361 switch (action) {
362 case PSERIES_RECONFIG_ADD:
363 if (pseries_add_processor(node))
364 err = NOTIFY_BAD;
365 break;
366 case PSERIES_RECONFIG_REMOVE:
367 pseries_remove_processor(node);
368 break;
369 default:
370 err = NOTIFY_DONE;
371 break;
372 }
373 return err;
374 }
375
376 static struct notifier_block pseries_smp_nb = {
377 .notifier_call = pseries_smp_notifier,
378 };
379
380 #define MAX_CEDE_LATENCY_LEVELS 4
381 #define CEDE_LATENCY_PARAM_LENGTH 10
382 #define CEDE_LATENCY_PARAM_MAX_LENGTH \
383 (MAX_CEDE_LATENCY_LEVELS * CEDE_LATENCY_PARAM_LENGTH * sizeof(char))
384 #define CEDE_LATENCY_TOKEN 45
385
386 static char cede_parameters[CEDE_LATENCY_PARAM_MAX_LENGTH];
387
388 static int parse_cede_parameters(void)
389 {
390 int call_status;
391
392 memset(cede_parameters, 0, CEDE_LATENCY_PARAM_MAX_LENGTH);
393 call_status = rtas_call(rtas_token("ibm,get-system-parameter"), 3, 1,
394 NULL,
395 CEDE_LATENCY_TOKEN,
396 __pa(cede_parameters),
397 CEDE_LATENCY_PARAM_MAX_LENGTH);
398
399 if (call_status != 0)
400 printk(KERN_INFO "CEDE_LATENCY: \
401 %s %s Error calling get-system-parameter(0x%x)\n",
402 __FILE__, __func__, call_status);
403 else
404 printk(KERN_INFO "CEDE_LATENCY: \
405 get-system-parameter successful.\n");
406
407 return call_status;
408 }
409
410 static int __init pseries_cpu_hotplug_init(void)
411 {
412 struct device_node *np;
413 const char *typep;
414 int cpu;
415
416 for_each_node_by_name(np, "interrupt-controller") {
417 typep = of_get_property(np, "compatible", NULL);
418 if (strstr(typep, "open-pic")) {
419 of_node_put(np);
420
421 printk(KERN_INFO "CPU Hotplug not supported on "
422 "systems using MPIC\n");
423 return 0;
424 }
425 }
426
427 rtas_stop_self_args.token = rtas_token("stop-self");
428 qcss_tok = rtas_token("query-cpu-stopped-state");
429
430 if (rtas_stop_self_args.token == RTAS_UNKNOWN_SERVICE ||
431 qcss_tok == RTAS_UNKNOWN_SERVICE) {
432 printk(KERN_INFO "CPU Hotplug not supported by firmware "
433 "- disabling.\n");
434 return 0;
435 }
436
437 ppc_md.cpu_die = pseries_mach_cpu_die;
438 smp_ops->cpu_disable = pseries_cpu_disable;
439 smp_ops->cpu_die = pseries_cpu_die;
440
441 /* Processors can be added/removed only on LPAR */
442 if (firmware_has_feature(FW_FEATURE_LPAR)) {
443 pSeries_reconfig_notifier_register(&pseries_smp_nb);
444 cpu_maps_update_begin();
445 if (cede_offline_enabled && parse_cede_parameters() == 0) {
446 default_offline_state = CPU_STATE_INACTIVE;
447 for_each_online_cpu(cpu)
448 set_default_offline_state(cpu);
449 }
450 cpu_maps_update_done();
451 }
452
453 return 0;
454 }
455 arch_initcall(pseries_cpu_hotplug_init);
This page took 0.042087 seconds and 6 git commands to generate.