arch/x86/include/asm/irq_vectors.h

   1 #ifndef _ASM_X86_IRQ_VECTORS_H
   2 #define _ASM_X86_IRQ_VECTORS_H
   3
   4 #include <linux/threads.h>
   5 /*
   6  * Linux IRQ vector layout.
   7  *
   8  * There are 256 IDT entries (per CPU - each entry is 8 bytes) which can
   9  * be defined by Linux. They are used as a jump table by the CPU when a
  10  * given vector is triggered - by a CPU-external, CPU-internal or
  11  * software-triggered event.
  12  *
  13  * Linux sets the kernel code address each entry jumps to early during
  14  * bootup, and never changes them. This is the general layout of the
  15  * IDT entries:
  16  *
  17  *  Vectors   0 ...  31 : system traps and exceptions - hardcoded events
  18  *  Vectors  32 ... 127 : device interrupts
  19  *  Vector  128         : legacy int80 syscall interface
  20  *  Vectors 129 ... INVALIDATE_TLB_VECTOR_START-1 except 204 : device interrupts
  21  *  Vectors INVALIDATE_TLB_VECTOR_START ... 255 : special interrupts
  22  *
  23  * 64-bit x86 has per CPU IDT tables, 32-bit has one shared IDT table.
  24  *
  25  * This file enumerates the exact layout of them:
  26  */
  27
  28 #define NMI_VECTOR                      0x02
  29 #define MCE_VECTOR                      0x12
  30
  31 /*
  32  * IDT vectors usable for external interrupt sources start at 0x20.
  33  * (0x80 is the syscall vector, 0x30-0x3f are for ISA)
  34  */
  35 #define FIRST_EXTERNAL_VECTOR           0x20
  36 /*
  37  * We start allocating at 0x21 to spread out vectors evenly between
  38  * priority levels. (0x80 is the syscall vector)
  39  */
  40 #define VECTOR_OFFSET_START             1
  41
  42 /*
  43  * Reserve the lowest usable vector (and hence lowest priority)  0x20 for
  44  * triggering cleanup after irq migration. 0x21-0x2f will still be used
  45  * for device interrupts.
  46  */
  47 #define IRQ_MOVE_CLEANUP_VECTOR         FIRST_EXTERNAL_VECTOR
  48
  49 #define IA32_SYSCALL_VECTOR             0x80
  50
  51 /*
  52  * Vectors 0x30-0x3f are used for ISA interrupts.
  53  *   round up to the next 16-vector boundary
  54  */
  55 #define ISA_IRQ_VECTOR(irq)             (((FIRST_EXTERNAL_VECTOR + 16) & ~15) + irq)
  56
  57 /*
  58  * Special IRQ vectors used by the SMP architecture, 0xf0-0xff
  59  *
  60  *  some of the following vectors are 'rare', they are merged
  61  *  into a single vector (CALL_FUNCTION_VECTOR) to save vector space.
  62  *  TLB, reschedule and local APIC vectors are performance-critical.
  63  */
  64
  65 #define SPURIOUS_APIC_VECTOR            0xff
  66 /*
  67  * Sanity check
  68  */
  69 #if ((SPURIOUS_APIC_VECTOR & 0x0F) != 0x0F)
  70 # error SPURIOUS_APIC_VECTOR definition error
  71 #endif
  72
  73 #define ERROR_APIC_VECTOR               0xfe
  74 #define RESCHEDULE_VECTOR               0xfd
  75 #define CALL_FUNCTION_VECTOR            0xfc
  76 #define CALL_FUNCTION_SINGLE_VECTOR     0xfb
  77 #define THERMAL_APIC_VECTOR             0xfa
  78 #define THRESHOLD_APIC_VECTOR           0xf9
  79 #define REBOOT_VECTOR                   0xf8
  80
  81 /*
  82  * Generic system vector for platform specific use
  83  */
  84 #define X86_PLATFORM_IPI_VECTOR         0xf7
  85
  86 #define POSTED_INTR_WAKEUP_VECTOR       0xf1
  87 /*
  88  * IRQ work vector:
  89  */
  90 #define IRQ_WORK_VECTOR                 0xf6
  91
  92 #define UV_BAU_MESSAGE                  0xf5
  93 #define DEFERRED_ERROR_VECTOR           0xf4
  94
  95 /* Vector on which hypervisor callbacks will be delivered */
  96 #define HYPERVISOR_CALLBACK_VECTOR      0xf3
  97
  98 /* Vector for KVM to deliver posted interrupt IPI */
  99 #ifdef CONFIG_HAVE_KVM
 100 #define POSTED_INTR_VECTOR              0xf2
 101 #endif
 102
 103 /*
 104  * Local APIC timer IRQ vector is on a different priority level,
 105  * to work around the 'lost local interrupt if more than 2 IRQ
 106  * sources per level' errata.
 107  */
 108 #define LOCAL_TIMER_VECTOR              0xef
 109
 110 #define NR_VECTORS                       256
 111
 112 #ifdef CONFIG_X86_LOCAL_APIC
 113 #define FIRST_SYSTEM_VECTOR             LOCAL_TIMER_VECTOR
 114 #else
 115 #define FIRST_SYSTEM_VECTOR             NR_VECTORS
 116 #endif
 117
 118 #define FPU_IRQ                           13
 119
 120 /*
 121  * Size the maximum number of interrupts.
 122  *
 123  * If the irq_desc[] array has a sparse layout, we can size things
 124  * generously - it scales up linearly with the maximum number of CPUs,
 125  * and the maximum number of IO-APICs, whichever is higher.
 126  *
 127  * In other cases we size more conservatively, to not create too large
 128  * static arrays.
 129  */
 130
 131 #define NR_IRQS_LEGACY                  16
 132
 133 #define CPU_VECTOR_LIMIT                (64 * NR_CPUS)
 134 #define IO_APIC_VECTOR_LIMIT            (32 * MAX_IO_APICS)
 135
 136 #if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_PCI_MSI)
 137 #define NR_IRQS                                         \
 138         (CPU_VECTOR_LIMIT > IO_APIC_VECTOR_LIMIT ?      \
 139                 (NR_VECTORS + CPU_VECTOR_LIMIT)  :      \
 140                 (NR_VECTORS + IO_APIC_VECTOR_LIMIT))
 141 #elif defined(CONFIG_X86_IO_APIC)
 142 #define NR_IRQS                         (NR_VECTORS + IO_APIC_VECTOR_LIMIT)
 143 #elif defined(CONFIG_PCI_MSI)
 144 #define NR_IRQS                         (NR_VECTORS + CPU_VECTOR_LIMIT)
 145 #else
 146 #define NR_IRQS                         NR_IRQS_LEGACY
 147 #endif
 148
 149 #endif /* _ASM_X86_IRQ_VECTORS_H */