gdb/testsuite: Improve detection of bug gdb/24541
[deliverable/binutils-gdb.git] / bfd / reloc.c
1 /* BFD support for handling relocation entries.
2 Copyright (C) 1990-2019 Free Software Foundation, Inc.
3 Written by Cygnus Support.
4
5 This file is part of BFD, the Binary File Descriptor library.
6
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 3 of the License, or
10 (at your option) any later version.
11
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
16
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
20 MA 02110-1301, USA. */
21
22 /*
23 SECTION
24 Relocations
25
26 BFD maintains relocations in much the same way it maintains
27 symbols: they are left alone until required, then read in
28 en-masse and translated into an internal form. A common
29 routine <<bfd_perform_relocation>> acts upon the
30 canonical form to do the fixup.
31
32 Relocations are maintained on a per section basis,
33 while symbols are maintained on a per BFD basis.
34
35 All that a back end has to do to fit the BFD interface is to create
36 a <<struct reloc_cache_entry>> for each relocation
37 in a particular section, and fill in the right bits of the structures.
38
39 @menu
40 @* typedef arelent::
41 @* howto manager::
42 @end menu
43
44 */
45
46 /* DO compile in the reloc_code name table from libbfd.h. */
47 #define _BFD_MAKE_TABLE_bfd_reloc_code_real
48
49 #include "sysdep.h"
50 #include "bfd.h"
51 #include "bfdlink.h"
52 #include "libbfd.h"
53 #include "bfdver.h"
54 /*
55 DOCDD
56 INODE
57 typedef arelent, howto manager, Relocations, Relocations
58
59 SUBSECTION
60 typedef arelent
61
62 This is the structure of a relocation entry:
63
64 CODE_FRAGMENT
65 .
66 .typedef enum bfd_reloc_status
67 .{
68 . {* No errors detected. Note - the value 2 is used so that it
69 . will not be mistaken for the boolean TRUE or FALSE values. *}
70 . bfd_reloc_ok = 2,
71 .
72 . {* The relocation was performed, but there was an overflow. *}
73 . bfd_reloc_overflow,
74 .
75 . {* The address to relocate was not within the section supplied. *}
76 . bfd_reloc_outofrange,
77 .
78 . {* Used by special functions. *}
79 . bfd_reloc_continue,
80 .
81 . {* Unsupported relocation size requested. *}
82 . bfd_reloc_notsupported,
83 .
84 . {* Unused. *}
85 . bfd_reloc_other,
86 .
87 . {* The symbol to relocate against was undefined. *}
88 . bfd_reloc_undefined,
89 .
90 . {* The relocation was performed, but may not be ok. If this type is
91 . returned, the error_message argument to bfd_perform_relocation
92 . will be set. *}
93 . bfd_reloc_dangerous
94 . }
95 . bfd_reloc_status_type;
96 .
97 .typedef const struct reloc_howto_struct reloc_howto_type;
98 .
99 .typedef struct reloc_cache_entry
100 .{
101 . {* A pointer into the canonical table of pointers. *}
102 . struct bfd_symbol **sym_ptr_ptr;
103 .
104 . {* offset in section. *}
105 . bfd_size_type address;
106 .
107 . {* addend for relocation value. *}
108 . bfd_vma addend;
109 .
110 . {* Pointer to how to perform the required relocation. *}
111 . reloc_howto_type *howto;
112 .
113 .}
114 .arelent;
115 .
116 */
117
118 /*
119 DESCRIPTION
120
121 Here is a description of each of the fields within an <<arelent>>:
122
123 o <<sym_ptr_ptr>>
124
125 The symbol table pointer points to a pointer to the symbol
126 associated with the relocation request. It is the pointer
127 into the table returned by the back end's
128 <<canonicalize_symtab>> action. @xref{Symbols}. The symbol is
129 referenced through a pointer to a pointer so that tools like
130 the linker can fix up all the symbols of the same name by
131 modifying only one pointer. The relocation routine looks in
132 the symbol and uses the base of the section the symbol is
133 attached to and the value of the symbol as the initial
134 relocation offset. If the symbol pointer is zero, then the
135 section provided is looked up.
136
137 o <<address>>
138
139 The <<address>> field gives the offset in bytes from the base of
140 the section data which owns the relocation record to the first
141 byte of relocatable information. The actual data relocated
142 will be relative to this point; for example, a relocation
143 type which modifies the bottom two bytes of a four byte word
144 would not touch the first byte pointed to in a big endian
145 world.
146
147 o <<addend>>
148
149 The <<addend>> is a value provided by the back end to be added (!)
150 to the relocation offset. Its interpretation is dependent upon
151 the howto. For example, on the 68k the code:
152
153 | char foo[];
154 | main()
155 | {
156 | return foo[0x12345678];
157 | }
158
159 Could be compiled into:
160
161 | linkw fp,#-4
162 | moveb @@#12345678,d0
163 | extbl d0
164 | unlk fp
165 | rts
166
167 This could create a reloc pointing to <<foo>>, but leave the
168 offset in the data, something like:
169
170 |RELOCATION RECORDS FOR [.text]:
171 |offset type value
172 |00000006 32 _foo
173 |
174 |00000000 4e56 fffc ; linkw fp,#-4
175 |00000004 1039 1234 5678 ; moveb @@#12345678,d0
176 |0000000a 49c0 ; extbl d0
177 |0000000c 4e5e ; unlk fp
178 |0000000e 4e75 ; rts
179
180 Using coff and an 88k, some instructions don't have enough
181 space in them to represent the full address range, and
182 pointers have to be loaded in two parts. So you'd get something like:
183
184 | or.u r13,r0,hi16(_foo+0x12345678)
185 | ld.b r2,r13,lo16(_foo+0x12345678)
186 | jmp r1
187
188 This should create two relocs, both pointing to <<_foo>>, and with
189 0x12340000 in their addend field. The data would consist of:
190
191 |RELOCATION RECORDS FOR [.text]:
192 |offset type value
193 |00000002 HVRT16 _foo+0x12340000
194 |00000006 LVRT16 _foo+0x12340000
195 |
196 |00000000 5da05678 ; or.u r13,r0,0x5678
197 |00000004 1c4d5678 ; ld.b r2,r13,0x5678
198 |00000008 f400c001 ; jmp r1
199
200 The relocation routine digs out the value from the data, adds
201 it to the addend to get the original offset, and then adds the
202 value of <<_foo>>. Note that all 32 bits have to be kept around
203 somewhere, to cope with carry from bit 15 to bit 16.
204
205 One further example is the sparc and the a.out format. The
206 sparc has a similar problem to the 88k, in that some
207 instructions don't have room for an entire offset, but on the
208 sparc the parts are created in odd sized lumps. The designers of
209 the a.out format chose to not use the data within the section
210 for storing part of the offset; all the offset is kept within
211 the reloc. Anything in the data should be ignored.
212
213 | save %sp,-112,%sp
214 | sethi %hi(_foo+0x12345678),%g2
215 | ldsb [%g2+%lo(_foo+0x12345678)],%i0
216 | ret
217 | restore
218
219 Both relocs contain a pointer to <<foo>>, and the offsets
220 contain junk.
221
222 |RELOCATION RECORDS FOR [.text]:
223 |offset type value
224 |00000004 HI22 _foo+0x12345678
225 |00000008 LO10 _foo+0x12345678
226 |
227 |00000000 9de3bf90 ; save %sp,-112,%sp
228 |00000004 05000000 ; sethi %hi(_foo+0),%g2
229 |00000008 f048a000 ; ldsb [%g2+%lo(_foo+0)],%i0
230 |0000000c 81c7e008 ; ret
231 |00000010 81e80000 ; restore
232
233 o <<howto>>
234
235 The <<howto>> field can be imagined as a
236 relocation instruction. It is a pointer to a structure which
237 contains information on what to do with all of the other
238 information in the reloc record and data section. A back end
239 would normally have a relocation instruction set and turn
240 relocations into pointers to the correct structure on input -
241 but it would be possible to create each howto field on demand.
242
243 */
244
245 /*
246 SUBSUBSECTION
247 <<enum complain_overflow>>
248
249 Indicates what sort of overflow checking should be done when
250 performing a relocation.
251
252 CODE_FRAGMENT
253 .
254 .enum complain_overflow
255 .{
256 . {* Do not complain on overflow. *}
257 . complain_overflow_dont,
258 .
259 . {* Complain if the value overflows when considered as a signed
260 . number one bit larger than the field. ie. A bitfield of N bits
261 . is allowed to represent -2**n to 2**n-1. *}
262 . complain_overflow_bitfield,
263 .
264 . {* Complain if the value overflows when considered as a signed
265 . number. *}
266 . complain_overflow_signed,
267 .
268 . {* Complain if the value overflows when considered as an
269 . unsigned number. *}
270 . complain_overflow_unsigned
271 .};
272
273 */
274
275 /*
276 SUBSUBSECTION
277 <<reloc_howto_type>>
278
279 The <<reloc_howto_type>> is a structure which contains all the
280 information that libbfd needs to know to tie up a back end's data.
281
282 CODE_FRAGMENT
283 .struct reloc_howto_struct
284 .{
285 . {* The type field has mainly a documentary use - the back end can
286 . do what it wants with it, though normally the back end's idea of
287 . an external reloc number is stored in this field. *}
288 . unsigned int type;
289 .
290 . {* The encoded size of the item to be relocated. This is *not* a
291 . power-of-two measure. Use bfd_get_reloc_size to find the size
292 . of the item in bytes. *}
293 . unsigned int size:3;
294 .
295 . {* The number of bits in the field to be relocated. This is used
296 . when doing overflow checking. *}
297 . unsigned int bitsize:7;
298 .
299 . {* The value the final relocation is shifted right by. This drops
300 . unwanted data from the relocation. *}
301 . unsigned int rightshift:6;
302 .
303 . {* The bit position of the reloc value in the destination.
304 . The relocated value is left shifted by this amount. *}
305 . unsigned int bitpos:6;
306 .
307 . {* What type of overflow error should be checked for when
308 . relocating. *}
309 . ENUM_BITFIELD (complain_overflow) complain_on_overflow:2;
310 .
311 . {* The relocation value should be negated before applying. *}
312 . unsigned int negate:1;
313 .
314 . {* The relocation is relative to the item being relocated. *}
315 . unsigned int pc_relative:1;
316 .
317 . {* Some formats record a relocation addend in the section contents
318 . rather than with the relocation. For ELF formats this is the
319 . distinction between USE_REL and USE_RELA (though the code checks
320 . for USE_REL == 1/0). The value of this field is TRUE if the
321 . addend is recorded with the section contents; when performing a
322 . partial link (ld -r) the section contents (the data) will be
323 . modified. The value of this field is FALSE if addends are
324 . recorded with the relocation (in arelent.addend); when performing
325 . a partial link the relocation will be modified.
326 . All relocations for all ELF USE_RELA targets should set this field
327 . to FALSE (values of TRUE should be looked on with suspicion).
328 . However, the converse is not true: not all relocations of all ELF
329 . USE_REL targets set this field to TRUE. Why this is so is peculiar
330 . to each particular target. For relocs that aren't used in partial
331 . links (e.g. GOT stuff) it doesn't matter what this is set to. *}
332 . unsigned int partial_inplace:1;
333 .
334 . {* When some formats create PC relative instructions, they leave
335 . the value of the pc of the place being relocated in the offset
336 . slot of the instruction, so that a PC relative relocation can
337 . be made just by adding in an ordinary offset (e.g., sun3 a.out).
338 . Some formats leave the displacement part of an instruction
339 . empty (e.g., ELF); this flag signals the fact. *}
340 . unsigned int pcrel_offset:1;
341 .
342 . {* src_mask selects the part of the instruction (or data) to be used
343 . in the relocation sum. If the target relocations don't have an
344 . addend in the reloc, eg. ELF USE_REL, src_mask will normally equal
345 . dst_mask to extract the addend from the section contents. If
346 . relocations do have an addend in the reloc, eg. ELF USE_RELA, this
347 . field should normally be zero. Non-zero values for ELF USE_RELA
348 . targets should be viewed with suspicion as normally the value in
349 . the dst_mask part of the section contents should be ignored. *}
350 . bfd_vma src_mask;
351 .
352 . {* dst_mask selects which parts of the instruction (or data) are
353 . replaced with a relocated value. *}
354 . bfd_vma dst_mask;
355 .
356 . {* If this field is non null, then the supplied function is
357 . called rather than the normal function. This allows really
358 . strange relocation methods to be accommodated. *}
359 . bfd_reloc_status_type (*special_function)
360 . (bfd *, arelent *, struct bfd_symbol *, void *, asection *,
361 . bfd *, char **);
362 .
363 . {* The textual name of the relocation type. *}
364 . char *name;
365 .};
366 .
367 */
368
369 /*
370 FUNCTION
371 The HOWTO Macro
372
373 DESCRIPTION
374 The HOWTO macro fills in a reloc_howto_type (a typedef for
375 const struct reloc_howto_struct).
376
377 .#define HOWTO(type, right, size, bits, pcrel, left, ovf, func, name, \
378 . inplace, src_mask, dst_mask, pcrel_off) \
379 . { (unsigned) type, size < 0 ? -size : size, bits, right, left, ovf, \
380 . size < 0, pcrel, inplace, pcrel_off, src_mask, dst_mask, func, name }
381
382 DESCRIPTION
383 This is used to fill in an empty howto entry in an array.
384
385 .#define EMPTY_HOWTO(C) \
386 . HOWTO ((C), 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL, \
387 . NULL, FALSE, 0, 0, FALSE)
388 .
389 */
390
391 /*
392 FUNCTION
393 bfd_get_reloc_size
394
395 SYNOPSIS
396 unsigned int bfd_get_reloc_size (reloc_howto_type *);
397
398 DESCRIPTION
399 For a reloc_howto_type that operates on a fixed number of bytes,
400 this returns the number of bytes operated on.
401 */
402
403 unsigned int
404 bfd_get_reloc_size (reloc_howto_type *howto)
405 {
406 switch (howto->size)
407 {
408 case 0: return 1;
409 case 1: return 2;
410 case 2: return 4;
411 case 3: return 0;
412 case 4: return 8;
413 case 5: return 3;
414 default: abort ();
415 }
416 }
417
418 /*
419 TYPEDEF
420 arelent_chain
421
422 DESCRIPTION
423
424 How relocs are tied together in an <<asection>>:
425
426 .typedef struct relent_chain
427 .{
428 . arelent relent;
429 . struct relent_chain *next;
430 .}
431 .arelent_chain;
432 .
433 */
434
435 /* N_ONES produces N one bits, without overflowing machine arithmetic. */
436 #define N_ONES(n) (((((bfd_vma) 1 << ((n) - 1)) - 1) << 1) | 1)
437
438 /*
439 FUNCTION
440 bfd_check_overflow
441
442 SYNOPSIS
443 bfd_reloc_status_type bfd_check_overflow
444 (enum complain_overflow how,
445 unsigned int bitsize,
446 unsigned int rightshift,
447 unsigned int addrsize,
448 bfd_vma relocation);
449
450 DESCRIPTION
451 Perform overflow checking on @var{relocation} which has
452 @var{bitsize} significant bits and will be shifted right by
453 @var{rightshift} bits, on a machine with addresses containing
454 @var{addrsize} significant bits. The result is either of
455 @code{bfd_reloc_ok} or @code{bfd_reloc_overflow}.
456
457 */
458
459 bfd_reloc_status_type
460 bfd_check_overflow (enum complain_overflow how,
461 unsigned int bitsize,
462 unsigned int rightshift,
463 unsigned int addrsize,
464 bfd_vma relocation)
465 {
466 bfd_vma fieldmask, addrmask, signmask, ss, a;
467 bfd_reloc_status_type flag = bfd_reloc_ok;
468
469 /* Note: BITSIZE should always be <= ADDRSIZE, but in case it's not,
470 we'll be permissive: extra bits in the field mask will
471 automatically extend the address mask for purposes of the
472 overflow check. */
473 fieldmask = N_ONES (bitsize);
474 signmask = ~fieldmask;
475 addrmask = N_ONES (addrsize) | (fieldmask << rightshift);
476 a = (relocation & addrmask) >> rightshift;
477
478 switch (how)
479 {
480 case complain_overflow_dont:
481 break;
482
483 case complain_overflow_signed:
484 /* If any sign bits are set, all sign bits must be set. That
485 is, A must be a valid negative address after shifting. */
486 signmask = ~ (fieldmask >> 1);
487 /* Fall thru */
488
489 case complain_overflow_bitfield:
490 /* Bitfields are sometimes signed, sometimes unsigned. We
491 explicitly allow an address wrap too, which means a bitfield
492 of n bits is allowed to store -2**n to 2**n-1. Thus overflow
493 if the value has some, but not all, bits set outside the
494 field. */
495 ss = a & signmask;
496 if (ss != 0 && ss != ((addrmask >> rightshift) & signmask))
497 flag = bfd_reloc_overflow;
498 break;
499
500 case complain_overflow_unsigned:
501 /* We have an overflow if the address does not fit in the field. */
502 if ((a & signmask) != 0)
503 flag = bfd_reloc_overflow;
504 break;
505
506 default:
507 abort ();
508 }
509
510 return flag;
511 }
512
513 /*
514 FUNCTION
515 bfd_reloc_offset_in_range
516
517 SYNOPSIS
518 bfd_boolean bfd_reloc_offset_in_range
519 (reloc_howto_type *howto,
520 bfd *abfd,
521 asection *section,
522 bfd_size_type offset);
523
524 DESCRIPTION
525 Returns TRUE if the reloc described by @var{HOWTO} can be
526 applied at @var{OFFSET} octets in @var{SECTION}.
527
528 */
529
530 /* HOWTO describes a relocation, at offset OCTET. Return whether the
531 relocation field is within SECTION of ABFD. */
532
533 bfd_boolean
534 bfd_reloc_offset_in_range (reloc_howto_type *howto,
535 bfd *abfd,
536 asection *section,
537 bfd_size_type octet)
538 {
539 bfd_size_type octet_end = bfd_get_section_limit_octets (abfd, section);
540 bfd_size_type reloc_size = bfd_get_reloc_size (howto);
541
542 /* The reloc field must be contained entirely within the section.
543 Allow zero length fields (marker relocs or NONE relocs where no
544 relocation will be performed) at the end of the section. */
545 return octet <= octet_end && octet + reloc_size <= octet_end;
546 }
547
548 /* Read and return the section contents at DATA converted to a host
549 integer (bfd_vma). The number of bytes read is given by the HOWTO. */
550
551 static bfd_vma
552 read_reloc (bfd *abfd, bfd_byte *data, reloc_howto_type *howto)
553 {
554 switch (howto->size)
555 {
556 case 0:
557 return bfd_get_8 (abfd, data);
558
559 case 1:
560 return bfd_get_16 (abfd, data);
561
562 case 2:
563 return bfd_get_32 (abfd, data);
564
565 case 3:
566 break;
567
568 #ifdef BFD64
569 case 4:
570 return bfd_get_64 (abfd, data);
571 #endif
572
573 case 5:
574 return bfd_get_24 (abfd, data);
575
576 default:
577 abort ();
578 }
579 return 0;
580 }
581
582 /* Convert VAL to target format and write to DATA. The number of
583 bytes written is given by the HOWTO. */
584
585 static void
586 write_reloc (bfd *abfd, bfd_vma val, bfd_byte *data, reloc_howto_type *howto)
587 {
588 switch (howto->size)
589 {
590 case 0:
591 bfd_put_8 (abfd, val, data);
592 break;
593
594 case 1:
595 bfd_put_16 (abfd, val, data);
596 break;
597
598 case 2:
599 bfd_put_32 (abfd, val, data);
600 break;
601
602 case 3:
603 break;
604
605 #ifdef BFD64
606 case 4:
607 bfd_put_64 (abfd, val, data);
608 break;
609 #endif
610
611 case 5:
612 bfd_put_24 (abfd, val, data);
613 break;
614
615 default:
616 abort ();
617 }
618 }
619
620 /* Apply RELOCATION value to target bytes at DATA, according to
621 HOWTO. */
622
623 static void
624 apply_reloc (bfd *abfd, bfd_byte *data, reloc_howto_type *howto,
625 bfd_vma relocation)
626 {
627 bfd_vma val = read_reloc (abfd, data, howto);
628
629 if (howto->negate)
630 relocation = -relocation;
631
632 val = ((val & ~howto->dst_mask)
633 | (((val & howto->src_mask) + relocation) & howto->dst_mask));
634
635 write_reloc (abfd, val, data, howto);
636 }
637
638 /*
639 FUNCTION
640 bfd_perform_relocation
641
642 SYNOPSIS
643 bfd_reloc_status_type bfd_perform_relocation
644 (bfd *abfd,
645 arelent *reloc_entry,
646 void *data,
647 asection *input_section,
648 bfd *output_bfd,
649 char **error_message);
650
651 DESCRIPTION
652 If @var{output_bfd} is supplied to this function, the
653 generated image will be relocatable; the relocations are
654 copied to the output file after they have been changed to
655 reflect the new state of the world. There are two ways of
656 reflecting the results of partial linkage in an output file:
657 by modifying the output data in place, and by modifying the
658 relocation record. Some native formats (e.g., basic a.out and
659 basic coff) have no way of specifying an addend in the
660 relocation type, so the addend has to go in the output data.
661 This is no big deal since in these formats the output data
662 slot will always be big enough for the addend. Complex reloc
663 types with addends were invented to solve just this problem.
664 The @var{error_message} argument is set to an error message if
665 this return @code{bfd_reloc_dangerous}.
666
667 */
668
669 bfd_reloc_status_type
670 bfd_perform_relocation (bfd *abfd,
671 arelent *reloc_entry,
672 void *data,
673 asection *input_section,
674 bfd *output_bfd,
675 char **error_message)
676 {
677 bfd_vma relocation;
678 bfd_reloc_status_type flag = bfd_reloc_ok;
679 bfd_size_type octets;
680 bfd_vma output_base = 0;
681 reloc_howto_type *howto = reloc_entry->howto;
682 asection *reloc_target_output_section;
683 asymbol *symbol;
684
685 symbol = *(reloc_entry->sym_ptr_ptr);
686
687 /* If we are not producing relocatable output, return an error if
688 the symbol is not defined. An undefined weak symbol is
689 considered to have a value of zero (SVR4 ABI, p. 4-27). */
690 if (bfd_is_und_section (symbol->section)
691 && (symbol->flags & BSF_WEAK) == 0
692 && output_bfd == NULL)
693 flag = bfd_reloc_undefined;
694
695 /* If there is a function supplied to handle this relocation type,
696 call it. It'll return `bfd_reloc_continue' if further processing
697 can be done. */
698 if (howto && howto->special_function)
699 {
700 bfd_reloc_status_type cont;
701
702 /* Note - we do not call bfd_reloc_offset_in_range here as the
703 reloc_entry->address field might actually be valid for the
704 backend concerned. It is up to the special_function itself
705 to call bfd_reloc_offset_in_range if needed. */
706 cont = howto->special_function (abfd, reloc_entry, symbol, data,
707 input_section, output_bfd,
708 error_message);
709 if (cont != bfd_reloc_continue)
710 return cont;
711 }
712
713 if (bfd_is_abs_section (symbol->section)
714 && output_bfd != NULL)
715 {
716 reloc_entry->address += input_section->output_offset;
717 return bfd_reloc_ok;
718 }
719
720 /* PR 17512: file: 0f67f69d. */
721 if (howto == NULL)
722 return bfd_reloc_undefined;
723
724 /* Is the address of the relocation really within the section? */
725 octets = reloc_entry->address * bfd_octets_per_byte (abfd);
726 if (!bfd_reloc_offset_in_range (howto, abfd, input_section, octets))
727 return bfd_reloc_outofrange;
728
729 /* Work out which section the relocation is targeted at and the
730 initial relocation command value. */
731
732 /* Get symbol value. (Common symbols are special.) */
733 if (bfd_is_com_section (symbol->section))
734 relocation = 0;
735 else
736 relocation = symbol->value;
737
738 reloc_target_output_section = symbol->section->output_section;
739
740 /* Convert input-section-relative symbol value to absolute. */
741 if ((output_bfd && ! howto->partial_inplace)
742 || reloc_target_output_section == NULL)
743 output_base = 0;
744 else
745 output_base = reloc_target_output_section->vma;
746
747 relocation += output_base + symbol->section->output_offset;
748
749 /* Add in supplied addend. */
750 relocation += reloc_entry->addend;
751
752 /* Here the variable relocation holds the final address of the
753 symbol we are relocating against, plus any addend. */
754
755 if (howto->pc_relative)
756 {
757 /* This is a PC relative relocation. We want to set RELOCATION
758 to the distance between the address of the symbol and the
759 location. RELOCATION is already the address of the symbol.
760
761 We start by subtracting the address of the section containing
762 the location.
763
764 If pcrel_offset is set, we must further subtract the position
765 of the location within the section. Some targets arrange for
766 the addend to be the negative of the position of the location
767 within the section; for example, i386-aout does this. For
768 i386-aout, pcrel_offset is FALSE. Some other targets do not
769 include the position of the location; for example, ELF.
770 For those targets, pcrel_offset is TRUE.
771
772 If we are producing relocatable output, then we must ensure
773 that this reloc will be correctly computed when the final
774 relocation is done. If pcrel_offset is FALSE we want to wind
775 up with the negative of the location within the section,
776 which means we must adjust the existing addend by the change
777 in the location within the section. If pcrel_offset is TRUE
778 we do not want to adjust the existing addend at all.
779
780 FIXME: This seems logical to me, but for the case of
781 producing relocatable output it is not what the code
782 actually does. I don't want to change it, because it seems
783 far too likely that something will break. */
784
785 relocation -=
786 input_section->output_section->vma + input_section->output_offset;
787
788 if (howto->pcrel_offset)
789 relocation -= reloc_entry->address;
790 }
791
792 if (output_bfd != NULL)
793 {
794 if (! howto->partial_inplace)
795 {
796 /* This is a partial relocation, and we want to apply the relocation
797 to the reloc entry rather than the raw data. Modify the reloc
798 inplace to reflect what we now know. */
799 reloc_entry->addend = relocation;
800 reloc_entry->address += input_section->output_offset;
801 return flag;
802 }
803 else
804 {
805 /* This is a partial relocation, but inplace, so modify the
806 reloc record a bit.
807
808 If we've relocated with a symbol with a section, change
809 into a ref to the section belonging to the symbol. */
810
811 reloc_entry->address += input_section->output_offset;
812
813 /* WTF?? */
814 if (abfd->xvec->flavour == bfd_target_coff_flavour
815 && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
816 && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
817 {
818 /* For m68k-coff, the addend was being subtracted twice during
819 relocation with -r. Removing the line below this comment
820 fixes that problem; see PR 2953.
821
822 However, Ian wrote the following, regarding removing the line below,
823 which explains why it is still enabled: --djm
824
825 If you put a patch like that into BFD you need to check all the COFF
826 linkers. I am fairly certain that patch will break coff-i386 (e.g.,
827 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
828 problem in a different way. There may very well be a reason that the
829 code works as it does.
830
831 Hmmm. The first obvious point is that bfd_perform_relocation should
832 not have any tests that depend upon the flavour. It's seem like
833 entirely the wrong place for such a thing. The second obvious point
834 is that the current code ignores the reloc addend when producing
835 relocatable output for COFF. That's peculiar. In fact, I really
836 have no idea what the point of the line you want to remove is.
837
838 A typical COFF reloc subtracts the old value of the symbol and adds in
839 the new value to the location in the object file (if it's a pc
840 relative reloc it adds the difference between the symbol value and the
841 location). When relocating we need to preserve that property.
842
843 BFD handles this by setting the addend to the negative of the old
844 value of the symbol. Unfortunately it handles common symbols in a
845 non-standard way (it doesn't subtract the old value) but that's a
846 different story (we can't change it without losing backward
847 compatibility with old object files) (coff-i386 does subtract the old
848 value, to be compatible with existing coff-i386 targets, like SCO).
849
850 So everything works fine when not producing relocatable output. When
851 we are producing relocatable output, logically we should do exactly
852 what we do when not producing relocatable output. Therefore, your
853 patch is correct. In fact, it should probably always just set
854 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
855 add the value into the object file. This won't hurt the COFF code,
856 which doesn't use the addend; I'm not sure what it will do to other
857 formats (the thing to check for would be whether any formats both use
858 the addend and set partial_inplace).
859
860 When I wanted to make coff-i386 produce relocatable output, I ran
861 into the problem that you are running into: I wanted to remove that
862 line. Rather than risk it, I made the coff-i386 relocs use a special
863 function; it's coff_i386_reloc in coff-i386.c. The function
864 specifically adds the addend field into the object file, knowing that
865 bfd_perform_relocation is not going to. If you remove that line, then
866 coff-i386.c will wind up adding the addend field in twice. It's
867 trivial to fix; it just needs to be done.
868
869 The problem with removing the line is just that it may break some
870 working code. With BFD it's hard to be sure of anything. The right
871 way to deal with this is simply to build and test at least all the
872 supported COFF targets. It should be straightforward if time and disk
873 space consuming. For each target:
874 1) build the linker
875 2) generate some executable, and link it using -r (I would
876 probably use paranoia.o and link against newlib/libc.a, which
877 for all the supported targets would be available in
878 /usr/cygnus/progressive/H-host/target/lib/libc.a).
879 3) make the change to reloc.c
880 4) rebuild the linker
881 5) repeat step 2
882 6) if the resulting object files are the same, you have at least
883 made it no worse
884 7) if they are different you have to figure out which version is
885 right
886 */
887 relocation -= reloc_entry->addend;
888 reloc_entry->addend = 0;
889 }
890 else
891 {
892 reloc_entry->addend = relocation;
893 }
894 }
895 }
896
897 /* FIXME: This overflow checking is incomplete, because the value
898 might have overflowed before we get here. For a correct check we
899 need to compute the value in a size larger than bitsize, but we
900 can't reasonably do that for a reloc the same size as a host
901 machine word.
902 FIXME: We should also do overflow checking on the result after
903 adding in the value contained in the object file. */
904 if (howto->complain_on_overflow != complain_overflow_dont
905 && flag == bfd_reloc_ok)
906 flag = bfd_check_overflow (howto->complain_on_overflow,
907 howto->bitsize,
908 howto->rightshift,
909 bfd_arch_bits_per_address (abfd),
910 relocation);
911
912 /* Either we are relocating all the way, or we don't want to apply
913 the relocation to the reloc entry (probably because there isn't
914 any room in the output format to describe addends to relocs). */
915
916 /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
917 (OSF version 1.3, compiler version 3.11). It miscompiles the
918 following program:
919
920 struct str
921 {
922 unsigned int i0;
923 } s = { 0 };
924
925 int
926 main ()
927 {
928 unsigned long x;
929
930 x = 0x100000000;
931 x <<= (unsigned long) s.i0;
932 if (x == 0)
933 printf ("failed\n");
934 else
935 printf ("succeeded (%lx)\n", x);
936 }
937 */
938
939 relocation >>= (bfd_vma) howto->rightshift;
940
941 /* Shift everything up to where it's going to be used. */
942 relocation <<= (bfd_vma) howto->bitpos;
943
944 /* Wait for the day when all have the mask in them. */
945
946 /* What we do:
947 i instruction to be left alone
948 o offset within instruction
949 r relocation offset to apply
950 S src mask
951 D dst mask
952 N ~dst mask
953 A part 1
954 B part 2
955 R result
956
957 Do this:
958 (( i i i i i o o o o o from bfd_get<size>
959 and S S S S S) to get the size offset we want
960 + r r r r r r r r r r) to get the final value to place
961 and D D D D D to chop to right size
962 -----------------------
963 = A A A A A
964 And this:
965 ( i i i i i o o o o o from bfd_get<size>
966 and N N N N N ) get instruction
967 -----------------------
968 = B B B B B
969
970 And then:
971 ( B B B B B
972 or A A A A A)
973 -----------------------
974 = R R R R R R R R R R put into bfd_put<size>
975 */
976
977 data = (bfd_byte *) data + octets;
978 apply_reloc (abfd, data, howto, relocation);
979 return flag;
980 }
981
982 /*
983 FUNCTION
984 bfd_install_relocation
985
986 SYNOPSIS
987 bfd_reloc_status_type bfd_install_relocation
988 (bfd *abfd,
989 arelent *reloc_entry,
990 void *data, bfd_vma data_start,
991 asection *input_section,
992 char **error_message);
993
994 DESCRIPTION
995 This looks remarkably like <<bfd_perform_relocation>>, except it
996 does not expect that the section contents have been filled in.
997 I.e., it's suitable for use when creating, rather than applying
998 a relocation.
999
1000 For now, this function should be considered reserved for the
1001 assembler.
1002 */
1003
1004 bfd_reloc_status_type
1005 bfd_install_relocation (bfd *abfd,
1006 arelent *reloc_entry,
1007 void *data_start,
1008 bfd_vma data_start_offset,
1009 asection *input_section,
1010 char **error_message)
1011 {
1012 bfd_vma relocation;
1013 bfd_reloc_status_type flag = bfd_reloc_ok;
1014 bfd_size_type octets;
1015 bfd_vma output_base = 0;
1016 reloc_howto_type *howto = reloc_entry->howto;
1017 asection *reloc_target_output_section;
1018 asymbol *symbol;
1019 bfd_byte *data;
1020
1021 symbol = *(reloc_entry->sym_ptr_ptr);
1022
1023 /* If there is a function supplied to handle this relocation type,
1024 call it. It'll return `bfd_reloc_continue' if further processing
1025 can be done. */
1026 if (howto && howto->special_function)
1027 {
1028 bfd_reloc_status_type cont;
1029
1030 /* Note - we do not call bfd_reloc_offset_in_range here as the
1031 reloc_entry->address field might actually be valid for the
1032 backend concerned. It is up to the special_function itself
1033 to call bfd_reloc_offset_in_range if needed. */
1034 /* XXX - The special_function calls haven't been fixed up to deal
1035 with creating new relocations and section contents. */
1036 cont = howto->special_function (abfd, reloc_entry, symbol,
1037 /* XXX - Non-portable! */
1038 ((bfd_byte *) data_start
1039 - data_start_offset),
1040 input_section, abfd, error_message);
1041 if (cont != bfd_reloc_continue)
1042 return cont;
1043 }
1044
1045 if (bfd_is_abs_section (symbol->section))
1046 {
1047 reloc_entry->address += input_section->output_offset;
1048 return bfd_reloc_ok;
1049 }
1050
1051 /* No need to check for howto != NULL if !bfd_is_abs_section as
1052 it will have been checked in `bfd_perform_relocation already'. */
1053
1054 /* Is the address of the relocation really within the section? */
1055 octets = reloc_entry->address * bfd_octets_per_byte (abfd);
1056 if (!bfd_reloc_offset_in_range (howto, abfd, input_section, octets))
1057 return bfd_reloc_outofrange;
1058
1059 /* Work out which section the relocation is targeted at and the
1060 initial relocation command value. */
1061
1062 /* Get symbol value. (Common symbols are special.) */
1063 if (bfd_is_com_section (symbol->section))
1064 relocation = 0;
1065 else
1066 relocation = symbol->value;
1067
1068 reloc_target_output_section = symbol->section->output_section;
1069
1070 /* Convert input-section-relative symbol value to absolute. */
1071 if (! howto->partial_inplace)
1072 output_base = 0;
1073 else
1074 output_base = reloc_target_output_section->vma;
1075
1076 relocation += output_base + symbol->section->output_offset;
1077
1078 /* Add in supplied addend. */
1079 relocation += reloc_entry->addend;
1080
1081 /* Here the variable relocation holds the final address of the
1082 symbol we are relocating against, plus any addend. */
1083
1084 if (howto->pc_relative)
1085 {
1086 /* This is a PC relative relocation. We want to set RELOCATION
1087 to the distance between the address of the symbol and the
1088 location. RELOCATION is already the address of the symbol.
1089
1090 We start by subtracting the address of the section containing
1091 the location.
1092
1093 If pcrel_offset is set, we must further subtract the position
1094 of the location within the section. Some targets arrange for
1095 the addend to be the negative of the position of the location
1096 within the section; for example, i386-aout does this. For
1097 i386-aout, pcrel_offset is FALSE. Some other targets do not
1098 include the position of the location; for example, ELF.
1099 For those targets, pcrel_offset is TRUE.
1100
1101 If we are producing relocatable output, then we must ensure
1102 that this reloc will be correctly computed when the final
1103 relocation is done. If pcrel_offset is FALSE we want to wind
1104 up with the negative of the location within the section,
1105 which means we must adjust the existing addend by the change
1106 in the location within the section. If pcrel_offset is TRUE
1107 we do not want to adjust the existing addend at all.
1108
1109 FIXME: This seems logical to me, but for the case of
1110 producing relocatable output it is not what the code
1111 actually does. I don't want to change it, because it seems
1112 far too likely that something will break. */
1113
1114 relocation -=
1115 input_section->output_section->vma + input_section->output_offset;
1116
1117 if (howto->pcrel_offset && howto->partial_inplace)
1118 relocation -= reloc_entry->address;
1119 }
1120
1121 if (! howto->partial_inplace)
1122 {
1123 /* This is a partial relocation, and we want to apply the relocation
1124 to the reloc entry rather than the raw data. Modify the reloc
1125 inplace to reflect what we now know. */
1126 reloc_entry->addend = relocation;
1127 reloc_entry->address += input_section->output_offset;
1128 return flag;
1129 }
1130 else
1131 {
1132 /* This is a partial relocation, but inplace, so modify the
1133 reloc record a bit.
1134
1135 If we've relocated with a symbol with a section, change
1136 into a ref to the section belonging to the symbol. */
1137 reloc_entry->address += input_section->output_offset;
1138
1139 /* WTF?? */
1140 if (abfd->xvec->flavour == bfd_target_coff_flavour
1141 && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
1142 && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
1143 {
1144
1145 /* For m68k-coff, the addend was being subtracted twice during
1146 relocation with -r. Removing the line below this comment
1147 fixes that problem; see PR 2953.
1148
1149 However, Ian wrote the following, regarding removing the line below,
1150 which explains why it is still enabled: --djm
1151
1152 If you put a patch like that into BFD you need to check all the COFF
1153 linkers. I am fairly certain that patch will break coff-i386 (e.g.,
1154 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
1155 problem in a different way. There may very well be a reason that the
1156 code works as it does.
1157
1158 Hmmm. The first obvious point is that bfd_install_relocation should
1159 not have any tests that depend upon the flavour. It's seem like
1160 entirely the wrong place for such a thing. The second obvious point
1161 is that the current code ignores the reloc addend when producing
1162 relocatable output for COFF. That's peculiar. In fact, I really
1163 have no idea what the point of the line you want to remove is.
1164
1165 A typical COFF reloc subtracts the old value of the symbol and adds in
1166 the new value to the location in the object file (if it's a pc
1167 relative reloc it adds the difference between the symbol value and the
1168 location). When relocating we need to preserve that property.
1169
1170 BFD handles this by setting the addend to the negative of the old
1171 value of the symbol. Unfortunately it handles common symbols in a
1172 non-standard way (it doesn't subtract the old value) but that's a
1173 different story (we can't change it without losing backward
1174 compatibility with old object files) (coff-i386 does subtract the old
1175 value, to be compatible with existing coff-i386 targets, like SCO).
1176
1177 So everything works fine when not producing relocatable output. When
1178 we are producing relocatable output, logically we should do exactly
1179 what we do when not producing relocatable output. Therefore, your
1180 patch is correct. In fact, it should probably always just set
1181 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
1182 add the value into the object file. This won't hurt the COFF code,
1183 which doesn't use the addend; I'm not sure what it will do to other
1184 formats (the thing to check for would be whether any formats both use
1185 the addend and set partial_inplace).
1186
1187 When I wanted to make coff-i386 produce relocatable output, I ran
1188 into the problem that you are running into: I wanted to remove that
1189 line. Rather than risk it, I made the coff-i386 relocs use a special
1190 function; it's coff_i386_reloc in coff-i386.c. The function
1191 specifically adds the addend field into the object file, knowing that
1192 bfd_install_relocation is not going to. If you remove that line, then
1193 coff-i386.c will wind up adding the addend field in twice. It's
1194 trivial to fix; it just needs to be done.
1195
1196 The problem with removing the line is just that it may break some
1197 working code. With BFD it's hard to be sure of anything. The right
1198 way to deal with this is simply to build and test at least all the
1199 supported COFF targets. It should be straightforward if time and disk
1200 space consuming. For each target:
1201 1) build the linker
1202 2) generate some executable, and link it using -r (I would
1203 probably use paranoia.o and link against newlib/libc.a, which
1204 for all the supported targets would be available in
1205 /usr/cygnus/progressive/H-host/target/lib/libc.a).
1206 3) make the change to reloc.c
1207 4) rebuild the linker
1208 5) repeat step 2
1209 6) if the resulting object files are the same, you have at least
1210 made it no worse
1211 7) if they are different you have to figure out which version is
1212 right. */
1213 relocation -= reloc_entry->addend;
1214 /* FIXME: There should be no target specific code here... */
1215 if (strcmp (abfd->xvec->name, "coff-z8k") != 0)
1216 reloc_entry->addend = 0;
1217 }
1218 else
1219 {
1220 reloc_entry->addend = relocation;
1221 }
1222 }
1223
1224 /* FIXME: This overflow checking is incomplete, because the value
1225 might have overflowed before we get here. For a correct check we
1226 need to compute the value in a size larger than bitsize, but we
1227 can't reasonably do that for a reloc the same size as a host
1228 machine word.
1229 FIXME: We should also do overflow checking on the result after
1230 adding in the value contained in the object file. */
1231 if (howto->complain_on_overflow != complain_overflow_dont)
1232 flag = bfd_check_overflow (howto->complain_on_overflow,
1233 howto->bitsize,
1234 howto->rightshift,
1235 bfd_arch_bits_per_address (abfd),
1236 relocation);
1237
1238 /* Either we are relocating all the way, or we don't want to apply
1239 the relocation to the reloc entry (probably because there isn't
1240 any room in the output format to describe addends to relocs). */
1241
1242 /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
1243 (OSF version 1.3, compiler version 3.11). It miscompiles the
1244 following program:
1245
1246 struct str
1247 {
1248 unsigned int i0;
1249 } s = { 0 };
1250
1251 int
1252 main ()
1253 {
1254 unsigned long x;
1255
1256 x = 0x100000000;
1257 x <<= (unsigned long) s.i0;
1258 if (x == 0)
1259 printf ("failed\n");
1260 else
1261 printf ("succeeded (%lx)\n", x);
1262 }
1263 */
1264
1265 relocation >>= (bfd_vma) howto->rightshift;
1266
1267 /* Shift everything up to where it's going to be used. */
1268 relocation <<= (bfd_vma) howto->bitpos;
1269
1270 /* Wait for the day when all have the mask in them. */
1271
1272 /* What we do:
1273 i instruction to be left alone
1274 o offset within instruction
1275 r relocation offset to apply
1276 S src mask
1277 D dst mask
1278 N ~dst mask
1279 A part 1
1280 B part 2
1281 R result
1282
1283 Do this:
1284 (( i i i i i o o o o o from bfd_get<size>
1285 and S S S S S) to get the size offset we want
1286 + r r r r r r r r r r) to get the final value to place
1287 and D D D D D to chop to right size
1288 -----------------------
1289 = A A A A A
1290 And this:
1291 ( i i i i i o o o o o from bfd_get<size>
1292 and N N N N N ) get instruction
1293 -----------------------
1294 = B B B B B
1295
1296 And then:
1297 ( B B B B B
1298 or A A A A A)
1299 -----------------------
1300 = R R R R R R R R R R put into bfd_put<size>
1301 */
1302
1303 data = (bfd_byte *) data_start + (octets - data_start_offset);
1304 apply_reloc (abfd, data, howto, relocation);
1305 return flag;
1306 }
1307
1308 /* This relocation routine is used by some of the backend linkers.
1309 They do not construct asymbol or arelent structures, so there is no
1310 reason for them to use bfd_perform_relocation. Also,
1311 bfd_perform_relocation is so hacked up it is easier to write a new
1312 function than to try to deal with it.
1313
1314 This routine does a final relocation. Whether it is useful for a
1315 relocatable link depends upon how the object format defines
1316 relocations.
1317
1318 FIXME: This routine ignores any special_function in the HOWTO,
1319 since the existing special_function values have been written for
1320 bfd_perform_relocation.
1321
1322 HOWTO is the reloc howto information.
1323 INPUT_BFD is the BFD which the reloc applies to.
1324 INPUT_SECTION is the section which the reloc applies to.
1325 CONTENTS is the contents of the section.
1326 ADDRESS is the address of the reloc within INPUT_SECTION.
1327 VALUE is the value of the symbol the reloc refers to.
1328 ADDEND is the addend of the reloc. */
1329
1330 bfd_reloc_status_type
1331 _bfd_final_link_relocate (reloc_howto_type *howto,
1332 bfd *input_bfd,
1333 asection *input_section,
1334 bfd_byte *contents,
1335 bfd_vma address,
1336 bfd_vma value,
1337 bfd_vma addend)
1338 {
1339 bfd_vma relocation;
1340 bfd_size_type octets = address * bfd_octets_per_byte (input_bfd);
1341
1342 /* Sanity check the address. */
1343 if (!bfd_reloc_offset_in_range (howto, input_bfd, input_section, octets))
1344 return bfd_reloc_outofrange;
1345
1346 /* This function assumes that we are dealing with a basic relocation
1347 against a symbol. We want to compute the value of the symbol to
1348 relocate to. This is just VALUE, the value of the symbol, plus
1349 ADDEND, any addend associated with the reloc. */
1350 relocation = value + addend;
1351
1352 /* If the relocation is PC relative, we want to set RELOCATION to
1353 the distance between the symbol (currently in RELOCATION) and the
1354 location we are relocating. Some targets (e.g., i386-aout)
1355 arrange for the contents of the section to be the negative of the
1356 offset of the location within the section; for such targets
1357 pcrel_offset is FALSE. Other targets (e.g., ELF) simply leave
1358 the contents of the section as zero; for such targets
1359 pcrel_offset is TRUE. If pcrel_offset is FALSE we do not need to
1360 subtract out the offset of the location within the section (which
1361 is just ADDRESS). */
1362 if (howto->pc_relative)
1363 {
1364 relocation -= (input_section->output_section->vma
1365 + input_section->output_offset);
1366 if (howto->pcrel_offset)
1367 relocation -= address;
1368 }
1369
1370 return _bfd_relocate_contents (howto, input_bfd, relocation,
1371 contents
1372 + address * bfd_octets_per_byte (input_bfd));
1373 }
1374
1375 /* Relocate a given location using a given value and howto. */
1376
1377 bfd_reloc_status_type
1378 _bfd_relocate_contents (reloc_howto_type *howto,
1379 bfd *input_bfd,
1380 bfd_vma relocation,
1381 bfd_byte *location)
1382 {
1383 bfd_vma x;
1384 bfd_reloc_status_type flag;
1385 unsigned int rightshift = howto->rightshift;
1386 unsigned int bitpos = howto->bitpos;
1387
1388 if (howto->negate)
1389 relocation = -relocation;
1390
1391 /* Get the value we are going to relocate. */
1392 x = read_reloc (input_bfd, location, howto);
1393
1394 /* Check for overflow. FIXME: We may drop bits during the addition
1395 which we don't check for. We must either check at every single
1396 operation, which would be tedious, or we must do the computations
1397 in a type larger than bfd_vma, which would be inefficient. */
1398 flag = bfd_reloc_ok;
1399 if (howto->complain_on_overflow != complain_overflow_dont)
1400 {
1401 bfd_vma addrmask, fieldmask, signmask, ss;
1402 bfd_vma a, b, sum;
1403
1404 /* Get the values to be added together. For signed and unsigned
1405 relocations, we assume that all values should be truncated to
1406 the size of an address. For bitfields, all the bits matter.
1407 See also bfd_check_overflow. */
1408 fieldmask = N_ONES (howto->bitsize);
1409 signmask = ~fieldmask;
1410 addrmask = (N_ONES (bfd_arch_bits_per_address (input_bfd))
1411 | (fieldmask << rightshift));
1412 a = (relocation & addrmask) >> rightshift;
1413 b = (x & howto->src_mask & addrmask) >> bitpos;
1414 addrmask >>= rightshift;
1415
1416 switch (howto->complain_on_overflow)
1417 {
1418 case complain_overflow_signed:
1419 /* If any sign bits are set, all sign bits must be set.
1420 That is, A must be a valid negative address after
1421 shifting. */
1422 signmask = ~(fieldmask >> 1);
1423 /* Fall thru */
1424
1425 case complain_overflow_bitfield:
1426 /* Much like the signed check, but for a field one bit
1427 wider. We allow a bitfield to represent numbers in the
1428 range -2**n to 2**n-1, where n is the number of bits in the
1429 field. Note that when bfd_vma is 32 bits, a 32-bit reloc
1430 can't overflow, which is exactly what we want. */
1431 ss = a & signmask;
1432 if (ss != 0 && ss != (addrmask & signmask))
1433 flag = bfd_reloc_overflow;
1434
1435 /* We only need this next bit of code if the sign bit of B
1436 is below the sign bit of A. This would only happen if
1437 SRC_MASK had fewer bits than BITSIZE. Note that if
1438 SRC_MASK has more bits than BITSIZE, we can get into
1439 trouble; we would need to verify that B is in range, as
1440 we do for A above. */
1441 ss = ((~howto->src_mask) >> 1) & howto->src_mask;
1442 ss >>= bitpos;
1443
1444 /* Set all the bits above the sign bit. */
1445 b = (b ^ ss) - ss;
1446
1447 /* Now we can do the addition. */
1448 sum = a + b;
1449
1450 /* See if the result has the correct sign. Bits above the
1451 sign bit are junk now; ignore them. If the sum is
1452 positive, make sure we did not have all negative inputs;
1453 if the sum is negative, make sure we did not have all
1454 positive inputs. The test below looks only at the sign
1455 bits, and it really just
1456 SIGN (A) == SIGN (B) && SIGN (A) != SIGN (SUM)
1457
1458 We mask with addrmask here to explicitly allow an address
1459 wrap-around. The Linux kernel relies on it, and it is
1460 the only way to write assembler code which can run when
1461 loaded at a location 0x80000000 away from the location at
1462 which it is linked. */
1463 if (((~(a ^ b)) & (a ^ sum)) & signmask & addrmask)
1464 flag = bfd_reloc_overflow;
1465 break;
1466
1467 case complain_overflow_unsigned:
1468 /* Checking for an unsigned overflow is relatively easy:
1469 trim the addresses and add, and trim the result as well.
1470 Overflow is normally indicated when the result does not
1471 fit in the field. However, we also need to consider the
1472 case when, e.g., fieldmask is 0x7fffffff or smaller, an
1473 input is 0x80000000, and bfd_vma is only 32 bits; then we
1474 will get sum == 0, but there is an overflow, since the
1475 inputs did not fit in the field. Instead of doing a
1476 separate test, we can check for this by or-ing in the
1477 operands when testing for the sum overflowing its final
1478 field. */
1479 sum = (a + b) & addrmask;
1480 if ((a | b | sum) & signmask)
1481 flag = bfd_reloc_overflow;
1482 break;
1483
1484 default:
1485 abort ();
1486 }
1487 }
1488
1489 /* Put RELOCATION in the right bits. */
1490 relocation >>= (bfd_vma) rightshift;
1491 relocation <<= (bfd_vma) bitpos;
1492
1493 /* Add RELOCATION to the right bits of X. */
1494 x = ((x & ~howto->dst_mask)
1495 | (((x & howto->src_mask) + relocation) & howto->dst_mask));
1496
1497 /* Put the relocated value back in the object file. */
1498 write_reloc (input_bfd, x, location, howto);
1499 return flag;
1500 }
1501
1502 /* Clear a given location using a given howto, by applying a fixed relocation
1503 value and discarding any in-place addend. This is used for fixed-up
1504 relocations against discarded symbols, to make ignorable debug or unwind
1505 information more obvious. */
1506
1507 bfd_reloc_status_type
1508 _bfd_clear_contents (reloc_howto_type *howto,
1509 bfd *input_bfd,
1510 asection *input_section,
1511 bfd_byte *buf,
1512 bfd_vma off)
1513 {
1514 bfd_vma x;
1515 bfd_byte *location;
1516
1517 if (!bfd_reloc_offset_in_range (howto, input_bfd, input_section, off))
1518 return bfd_reloc_outofrange;
1519
1520 /* Get the value we are going to relocate. */
1521 location = buf + off;
1522 x = read_reloc (input_bfd, location, howto);
1523
1524 /* Zero out the unwanted bits of X. */
1525 x &= ~howto->dst_mask;
1526
1527 /* For a range list, use 1 instead of 0 as placeholder. 0
1528 would terminate the list, hiding any later entries. */
1529 if (strcmp (bfd_get_section_name (input_bfd, input_section),
1530 ".debug_ranges") == 0
1531 && (howto->dst_mask & 1) != 0)
1532 x |= 1;
1533
1534 /* Put the relocated value back in the object file. */
1535 write_reloc (input_bfd, x, location, howto);
1536 return bfd_reloc_ok;
1537 }
1538
1539 /*
1540 DOCDD
1541 INODE
1542 howto manager, , typedef arelent, Relocations
1543
1544 SUBSECTION
1545 The howto manager
1546
1547 When an application wants to create a relocation, but doesn't
1548 know what the target machine might call it, it can find out by
1549 using this bit of code.
1550
1551 */
1552
1553 /*
1554 TYPEDEF
1555 bfd_reloc_code_type
1556
1557 DESCRIPTION
1558 The insides of a reloc code. The idea is that, eventually, there
1559 will be one enumerator for every type of relocation we ever do.
1560 Pass one of these values to <<bfd_reloc_type_lookup>>, and it'll
1561 return a howto pointer.
1562
1563 This does mean that the application must determine the correct
1564 enumerator value; you can't get a howto pointer from a random set
1565 of attributes.
1566
1567 SENUM
1568 bfd_reloc_code_real
1569
1570 ENUM
1571 BFD_RELOC_64
1572 ENUMX
1573 BFD_RELOC_32
1574 ENUMX
1575 BFD_RELOC_26
1576 ENUMX
1577 BFD_RELOC_24
1578 ENUMX
1579 BFD_RELOC_16
1580 ENUMX
1581 BFD_RELOC_14
1582 ENUMX
1583 BFD_RELOC_8
1584 ENUMDOC
1585 Basic absolute relocations of N bits.
1586
1587 ENUM
1588 BFD_RELOC_64_PCREL
1589 ENUMX
1590 BFD_RELOC_32_PCREL
1591 ENUMX
1592 BFD_RELOC_24_PCREL
1593 ENUMX
1594 BFD_RELOC_16_PCREL
1595 ENUMX
1596 BFD_RELOC_12_PCREL
1597 ENUMX
1598 BFD_RELOC_8_PCREL
1599 ENUMDOC
1600 PC-relative relocations. Sometimes these are relative to the address
1601 of the relocation itself; sometimes they are relative to the start of
1602 the section containing the relocation. It depends on the specific target.
1603
1604 ENUM
1605 BFD_RELOC_32_SECREL
1606 ENUMDOC
1607 Section relative relocations. Some targets need this for DWARF2.
1608
1609 ENUM
1610 BFD_RELOC_32_GOT_PCREL
1611 ENUMX
1612 BFD_RELOC_16_GOT_PCREL
1613 ENUMX
1614 BFD_RELOC_8_GOT_PCREL
1615 ENUMX
1616 BFD_RELOC_32_GOTOFF
1617 ENUMX
1618 BFD_RELOC_16_GOTOFF
1619 ENUMX
1620 BFD_RELOC_LO16_GOTOFF
1621 ENUMX
1622 BFD_RELOC_HI16_GOTOFF
1623 ENUMX
1624 BFD_RELOC_HI16_S_GOTOFF
1625 ENUMX
1626 BFD_RELOC_8_GOTOFF
1627 ENUMX
1628 BFD_RELOC_64_PLT_PCREL
1629 ENUMX
1630 BFD_RELOC_32_PLT_PCREL
1631 ENUMX
1632 BFD_RELOC_24_PLT_PCREL
1633 ENUMX
1634 BFD_RELOC_16_PLT_PCREL
1635 ENUMX
1636 BFD_RELOC_8_PLT_PCREL
1637 ENUMX
1638 BFD_RELOC_64_PLTOFF
1639 ENUMX
1640 BFD_RELOC_32_PLTOFF
1641 ENUMX
1642 BFD_RELOC_16_PLTOFF
1643 ENUMX
1644 BFD_RELOC_LO16_PLTOFF
1645 ENUMX
1646 BFD_RELOC_HI16_PLTOFF
1647 ENUMX
1648 BFD_RELOC_HI16_S_PLTOFF
1649 ENUMX
1650 BFD_RELOC_8_PLTOFF
1651 ENUMDOC
1652 For ELF.
1653
1654 ENUM
1655 BFD_RELOC_SIZE32
1656 ENUMX
1657 BFD_RELOC_SIZE64
1658 ENUMDOC
1659 Size relocations.
1660
1661 ENUM
1662 BFD_RELOC_68K_GLOB_DAT
1663 ENUMX
1664 BFD_RELOC_68K_JMP_SLOT
1665 ENUMX
1666 BFD_RELOC_68K_RELATIVE
1667 ENUMX
1668 BFD_RELOC_68K_TLS_GD32
1669 ENUMX
1670 BFD_RELOC_68K_TLS_GD16
1671 ENUMX
1672 BFD_RELOC_68K_TLS_GD8
1673 ENUMX
1674 BFD_RELOC_68K_TLS_LDM32
1675 ENUMX
1676 BFD_RELOC_68K_TLS_LDM16
1677 ENUMX
1678 BFD_RELOC_68K_TLS_LDM8
1679 ENUMX
1680 BFD_RELOC_68K_TLS_LDO32
1681 ENUMX
1682 BFD_RELOC_68K_TLS_LDO16
1683 ENUMX
1684 BFD_RELOC_68K_TLS_LDO8
1685 ENUMX
1686 BFD_RELOC_68K_TLS_IE32
1687 ENUMX
1688 BFD_RELOC_68K_TLS_IE16
1689 ENUMX
1690 BFD_RELOC_68K_TLS_IE8
1691 ENUMX
1692 BFD_RELOC_68K_TLS_LE32
1693 ENUMX
1694 BFD_RELOC_68K_TLS_LE16
1695 ENUMX
1696 BFD_RELOC_68K_TLS_LE8
1697 ENUMDOC
1698 Relocations used by 68K ELF.
1699
1700 ENUM
1701 BFD_RELOC_32_BASEREL
1702 ENUMX
1703 BFD_RELOC_16_BASEREL
1704 ENUMX
1705 BFD_RELOC_LO16_BASEREL
1706 ENUMX
1707 BFD_RELOC_HI16_BASEREL
1708 ENUMX
1709 BFD_RELOC_HI16_S_BASEREL
1710 ENUMX
1711 BFD_RELOC_8_BASEREL
1712 ENUMX
1713 BFD_RELOC_RVA
1714 ENUMDOC
1715 Linkage-table relative.
1716
1717 ENUM
1718 BFD_RELOC_8_FFnn
1719 ENUMDOC
1720 Absolute 8-bit relocation, but used to form an address like 0xFFnn.
1721
1722 ENUM
1723 BFD_RELOC_32_PCREL_S2
1724 ENUMX
1725 BFD_RELOC_16_PCREL_S2
1726 ENUMX
1727 BFD_RELOC_23_PCREL_S2
1728 ENUMDOC
1729 These PC-relative relocations are stored as word displacements --
1730 i.e., byte displacements shifted right two bits. The 30-bit word
1731 displacement (<<32_PCREL_S2>> -- 32 bits, shifted 2) is used on the
1732 SPARC. (SPARC tools generally refer to this as <<WDISP30>>.) The
1733 signed 16-bit displacement is used on the MIPS, and the 23-bit
1734 displacement is used on the Alpha.
1735
1736 ENUM
1737 BFD_RELOC_HI22
1738 ENUMX
1739 BFD_RELOC_LO10
1740 ENUMDOC
1741 High 22 bits and low 10 bits of 32-bit value, placed into lower bits of
1742 the target word. These are used on the SPARC.
1743
1744 ENUM
1745 BFD_RELOC_GPREL16
1746 ENUMX
1747 BFD_RELOC_GPREL32
1748 ENUMDOC
1749 For systems that allocate a Global Pointer register, these are
1750 displacements off that register. These relocation types are
1751 handled specially, because the value the register will have is
1752 decided relatively late.
1753
1754 ENUM
1755 BFD_RELOC_NONE
1756 ENUMX
1757 BFD_RELOC_SPARC_WDISP22
1758 ENUMX
1759 BFD_RELOC_SPARC22
1760 ENUMX
1761 BFD_RELOC_SPARC13
1762 ENUMX
1763 BFD_RELOC_SPARC_GOT10
1764 ENUMX
1765 BFD_RELOC_SPARC_GOT13
1766 ENUMX
1767 BFD_RELOC_SPARC_GOT22
1768 ENUMX
1769 BFD_RELOC_SPARC_PC10
1770 ENUMX
1771 BFD_RELOC_SPARC_PC22
1772 ENUMX
1773 BFD_RELOC_SPARC_WPLT30
1774 ENUMX
1775 BFD_RELOC_SPARC_COPY
1776 ENUMX
1777 BFD_RELOC_SPARC_GLOB_DAT
1778 ENUMX
1779 BFD_RELOC_SPARC_JMP_SLOT
1780 ENUMX
1781 BFD_RELOC_SPARC_RELATIVE
1782 ENUMX
1783 BFD_RELOC_SPARC_UA16
1784 ENUMX
1785 BFD_RELOC_SPARC_UA32
1786 ENUMX
1787 BFD_RELOC_SPARC_UA64
1788 ENUMX
1789 BFD_RELOC_SPARC_GOTDATA_HIX22
1790 ENUMX
1791 BFD_RELOC_SPARC_GOTDATA_LOX10
1792 ENUMX
1793 BFD_RELOC_SPARC_GOTDATA_OP_HIX22
1794 ENUMX
1795 BFD_RELOC_SPARC_GOTDATA_OP_LOX10
1796 ENUMX
1797 BFD_RELOC_SPARC_GOTDATA_OP
1798 ENUMX
1799 BFD_RELOC_SPARC_JMP_IREL
1800 ENUMX
1801 BFD_RELOC_SPARC_IRELATIVE
1802 ENUMDOC
1803 SPARC ELF relocations. There is probably some overlap with other
1804 relocation types already defined.
1805
1806 ENUM
1807 BFD_RELOC_SPARC_BASE13
1808 ENUMX
1809 BFD_RELOC_SPARC_BASE22
1810 ENUMDOC
1811 I think these are specific to SPARC a.out (e.g., Sun 4).
1812
1813 ENUMEQ
1814 BFD_RELOC_SPARC_64
1815 BFD_RELOC_64
1816 ENUMX
1817 BFD_RELOC_SPARC_10
1818 ENUMX
1819 BFD_RELOC_SPARC_11
1820 ENUMX
1821 BFD_RELOC_SPARC_OLO10
1822 ENUMX
1823 BFD_RELOC_SPARC_HH22
1824 ENUMX
1825 BFD_RELOC_SPARC_HM10
1826 ENUMX
1827 BFD_RELOC_SPARC_LM22
1828 ENUMX
1829 BFD_RELOC_SPARC_PC_HH22
1830 ENUMX
1831 BFD_RELOC_SPARC_PC_HM10
1832 ENUMX
1833 BFD_RELOC_SPARC_PC_LM22
1834 ENUMX
1835 BFD_RELOC_SPARC_WDISP16
1836 ENUMX
1837 BFD_RELOC_SPARC_WDISP19
1838 ENUMX
1839 BFD_RELOC_SPARC_7
1840 ENUMX
1841 BFD_RELOC_SPARC_6
1842 ENUMX
1843 BFD_RELOC_SPARC_5
1844 ENUMEQX
1845 BFD_RELOC_SPARC_DISP64
1846 BFD_RELOC_64_PCREL
1847 ENUMX
1848 BFD_RELOC_SPARC_PLT32
1849 ENUMX
1850 BFD_RELOC_SPARC_PLT64
1851 ENUMX
1852 BFD_RELOC_SPARC_HIX22
1853 ENUMX
1854 BFD_RELOC_SPARC_LOX10
1855 ENUMX
1856 BFD_RELOC_SPARC_H44
1857 ENUMX
1858 BFD_RELOC_SPARC_M44
1859 ENUMX
1860 BFD_RELOC_SPARC_L44
1861 ENUMX
1862 BFD_RELOC_SPARC_REGISTER
1863 ENUMX
1864 BFD_RELOC_SPARC_H34
1865 ENUMX
1866 BFD_RELOC_SPARC_SIZE32
1867 ENUMX
1868 BFD_RELOC_SPARC_SIZE64
1869 ENUMX
1870 BFD_RELOC_SPARC_WDISP10
1871 ENUMDOC
1872 SPARC64 relocations
1873
1874 ENUM
1875 BFD_RELOC_SPARC_REV32
1876 ENUMDOC
1877 SPARC little endian relocation
1878 ENUM
1879 BFD_RELOC_SPARC_TLS_GD_HI22
1880 ENUMX
1881 BFD_RELOC_SPARC_TLS_GD_LO10
1882 ENUMX
1883 BFD_RELOC_SPARC_TLS_GD_ADD
1884 ENUMX
1885 BFD_RELOC_SPARC_TLS_GD_CALL
1886 ENUMX
1887 BFD_RELOC_SPARC_TLS_LDM_HI22
1888 ENUMX
1889 BFD_RELOC_SPARC_TLS_LDM_LO10
1890 ENUMX
1891 BFD_RELOC_SPARC_TLS_LDM_ADD
1892 ENUMX
1893 BFD_RELOC_SPARC_TLS_LDM_CALL
1894 ENUMX
1895 BFD_RELOC_SPARC_TLS_LDO_HIX22
1896 ENUMX
1897 BFD_RELOC_SPARC_TLS_LDO_LOX10
1898 ENUMX
1899 BFD_RELOC_SPARC_TLS_LDO_ADD
1900 ENUMX
1901 BFD_RELOC_SPARC_TLS_IE_HI22
1902 ENUMX
1903 BFD_RELOC_SPARC_TLS_IE_LO10
1904 ENUMX
1905 BFD_RELOC_SPARC_TLS_IE_LD
1906 ENUMX
1907 BFD_RELOC_SPARC_TLS_IE_LDX
1908 ENUMX
1909 BFD_RELOC_SPARC_TLS_IE_ADD
1910 ENUMX
1911 BFD_RELOC_SPARC_TLS_LE_HIX22
1912 ENUMX
1913 BFD_RELOC_SPARC_TLS_LE_LOX10
1914 ENUMX
1915 BFD_RELOC_SPARC_TLS_DTPMOD32
1916 ENUMX
1917 BFD_RELOC_SPARC_TLS_DTPMOD64
1918 ENUMX
1919 BFD_RELOC_SPARC_TLS_DTPOFF32
1920 ENUMX
1921 BFD_RELOC_SPARC_TLS_DTPOFF64
1922 ENUMX
1923 BFD_RELOC_SPARC_TLS_TPOFF32
1924 ENUMX
1925 BFD_RELOC_SPARC_TLS_TPOFF64
1926 ENUMDOC
1927 SPARC TLS relocations
1928
1929 ENUM
1930 BFD_RELOC_SPU_IMM7
1931 ENUMX
1932 BFD_RELOC_SPU_IMM8
1933 ENUMX
1934 BFD_RELOC_SPU_IMM10
1935 ENUMX
1936 BFD_RELOC_SPU_IMM10W
1937 ENUMX
1938 BFD_RELOC_SPU_IMM16
1939 ENUMX
1940 BFD_RELOC_SPU_IMM16W
1941 ENUMX
1942 BFD_RELOC_SPU_IMM18
1943 ENUMX
1944 BFD_RELOC_SPU_PCREL9a
1945 ENUMX
1946 BFD_RELOC_SPU_PCREL9b
1947 ENUMX
1948 BFD_RELOC_SPU_PCREL16
1949 ENUMX
1950 BFD_RELOC_SPU_LO16
1951 ENUMX
1952 BFD_RELOC_SPU_HI16
1953 ENUMX
1954 BFD_RELOC_SPU_PPU32
1955 ENUMX
1956 BFD_RELOC_SPU_PPU64
1957 ENUMX
1958 BFD_RELOC_SPU_ADD_PIC
1959 ENUMDOC
1960 SPU Relocations.
1961
1962 ENUM
1963 BFD_RELOC_ALPHA_GPDISP_HI16
1964 ENUMDOC
1965 Alpha ECOFF and ELF relocations. Some of these treat the symbol or
1966 "addend" in some special way.
1967 For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when
1968 writing; when reading, it will be the absolute section symbol. The
1969 addend is the displacement in bytes of the "lda" instruction from
1970 the "ldah" instruction (which is at the address of this reloc).
1971 ENUM
1972 BFD_RELOC_ALPHA_GPDISP_LO16
1973 ENUMDOC
1974 For GPDISP_LO16 ("ignore") relocations, the symbol is handled as
1975 with GPDISP_HI16 relocs. The addend is ignored when writing the
1976 relocations out, and is filled in with the file's GP value on
1977 reading, for convenience.
1978
1979 ENUM
1980 BFD_RELOC_ALPHA_GPDISP
1981 ENUMDOC
1982 The ELF GPDISP relocation is exactly the same as the GPDISP_HI16
1983 relocation except that there is no accompanying GPDISP_LO16
1984 relocation.
1985
1986 ENUM
1987 BFD_RELOC_ALPHA_LITERAL
1988 ENUMX
1989 BFD_RELOC_ALPHA_ELF_LITERAL
1990 ENUMX
1991 BFD_RELOC_ALPHA_LITUSE
1992 ENUMDOC
1993 The Alpha LITERAL/LITUSE relocs are produced by a symbol reference;
1994 the assembler turns it into a LDQ instruction to load the address of
1995 the symbol, and then fills in a register in the real instruction.
1996
1997 The LITERAL reloc, at the LDQ instruction, refers to the .lita
1998 section symbol. The addend is ignored when writing, but is filled
1999 in with the file's GP value on reading, for convenience, as with the
2000 GPDISP_LO16 reloc.
2001
2002 The ELF_LITERAL reloc is somewhere between 16_GOTOFF and GPDISP_LO16.
2003 It should refer to the symbol to be referenced, as with 16_GOTOFF,
2004 but it generates output not based on the position within the .got
2005 section, but relative to the GP value chosen for the file during the
2006 final link stage.
2007
2008 The LITUSE reloc, on the instruction using the loaded address, gives
2009 information to the linker that it might be able to use to optimize
2010 away some literal section references. The symbol is ignored (read
2011 as the absolute section symbol), and the "addend" indicates the type
2012 of instruction using the register:
2013 1 - "memory" fmt insn
2014 2 - byte-manipulation (byte offset reg)
2015 3 - jsr (target of branch)
2016
2017 ENUM
2018 BFD_RELOC_ALPHA_HINT
2019 ENUMDOC
2020 The HINT relocation indicates a value that should be filled into the
2021 "hint" field of a jmp/jsr/ret instruction, for possible branch-
2022 prediction logic which may be provided on some processors.
2023
2024 ENUM
2025 BFD_RELOC_ALPHA_LINKAGE
2026 ENUMDOC
2027 The LINKAGE relocation outputs a linkage pair in the object file,
2028 which is filled by the linker.
2029
2030 ENUM
2031 BFD_RELOC_ALPHA_CODEADDR
2032 ENUMDOC
2033 The CODEADDR relocation outputs a STO_CA in the object file,
2034 which is filled by the linker.
2035
2036 ENUM
2037 BFD_RELOC_ALPHA_GPREL_HI16
2038 ENUMX
2039 BFD_RELOC_ALPHA_GPREL_LO16
2040 ENUMDOC
2041 The GPREL_HI/LO relocations together form a 32-bit offset from the
2042 GP register.
2043
2044 ENUM
2045 BFD_RELOC_ALPHA_BRSGP
2046 ENUMDOC
2047 Like BFD_RELOC_23_PCREL_S2, except that the source and target must
2048 share a common GP, and the target address is adjusted for
2049 STO_ALPHA_STD_GPLOAD.
2050
2051 ENUM
2052 BFD_RELOC_ALPHA_NOP
2053 ENUMDOC
2054 The NOP relocation outputs a NOP if the longword displacement
2055 between two procedure entry points is < 2^21.
2056
2057 ENUM
2058 BFD_RELOC_ALPHA_BSR
2059 ENUMDOC
2060 The BSR relocation outputs a BSR if the longword displacement
2061 between two procedure entry points is < 2^21.
2062
2063 ENUM
2064 BFD_RELOC_ALPHA_LDA
2065 ENUMDOC
2066 The LDA relocation outputs a LDA if the longword displacement
2067 between two procedure entry points is < 2^16.
2068
2069 ENUM
2070 BFD_RELOC_ALPHA_BOH
2071 ENUMDOC
2072 The BOH relocation outputs a BSR if the longword displacement
2073 between two procedure entry points is < 2^21, or else a hint.
2074
2075 ENUM
2076 BFD_RELOC_ALPHA_TLSGD
2077 ENUMX
2078 BFD_RELOC_ALPHA_TLSLDM
2079 ENUMX
2080 BFD_RELOC_ALPHA_DTPMOD64
2081 ENUMX
2082 BFD_RELOC_ALPHA_GOTDTPREL16
2083 ENUMX
2084 BFD_RELOC_ALPHA_DTPREL64
2085 ENUMX
2086 BFD_RELOC_ALPHA_DTPREL_HI16
2087 ENUMX
2088 BFD_RELOC_ALPHA_DTPREL_LO16
2089 ENUMX
2090 BFD_RELOC_ALPHA_DTPREL16
2091 ENUMX
2092 BFD_RELOC_ALPHA_GOTTPREL16
2093 ENUMX
2094 BFD_RELOC_ALPHA_TPREL64
2095 ENUMX
2096 BFD_RELOC_ALPHA_TPREL_HI16
2097 ENUMX
2098 BFD_RELOC_ALPHA_TPREL_LO16
2099 ENUMX
2100 BFD_RELOC_ALPHA_TPREL16
2101 ENUMDOC
2102 Alpha thread-local storage relocations.
2103
2104 ENUM
2105 BFD_RELOC_MIPS_JMP
2106 ENUMX
2107 BFD_RELOC_MICROMIPS_JMP
2108 ENUMDOC
2109 The MIPS jump instruction.
2110
2111 ENUM
2112 BFD_RELOC_MIPS16_JMP
2113 ENUMDOC
2114 The MIPS16 jump instruction.
2115
2116 ENUM
2117 BFD_RELOC_MIPS16_GPREL
2118 ENUMDOC
2119 MIPS16 GP relative reloc.
2120
2121 ENUM
2122 BFD_RELOC_HI16
2123 ENUMDOC
2124 High 16 bits of 32-bit value; simple reloc.
2125
2126 ENUM
2127 BFD_RELOC_HI16_S
2128 ENUMDOC
2129 High 16 bits of 32-bit value but the low 16 bits will be sign
2130 extended and added to form the final result. If the low 16
2131 bits form a negative number, we need to add one to the high value
2132 to compensate for the borrow when the low bits are added.
2133
2134 ENUM
2135 BFD_RELOC_LO16
2136 ENUMDOC
2137 Low 16 bits.
2138
2139 ENUM
2140 BFD_RELOC_HI16_PCREL
2141 ENUMDOC
2142 High 16 bits of 32-bit pc-relative value
2143 ENUM
2144 BFD_RELOC_HI16_S_PCREL
2145 ENUMDOC
2146 High 16 bits of 32-bit pc-relative value, adjusted
2147 ENUM
2148 BFD_RELOC_LO16_PCREL
2149 ENUMDOC
2150 Low 16 bits of pc-relative value
2151
2152 ENUM
2153 BFD_RELOC_MIPS16_GOT16
2154 ENUMX
2155 BFD_RELOC_MIPS16_CALL16
2156 ENUMDOC
2157 Equivalent of BFD_RELOC_MIPS_*, but with the MIPS16 layout of
2158 16-bit immediate fields
2159 ENUM
2160 BFD_RELOC_MIPS16_HI16
2161 ENUMDOC
2162 MIPS16 high 16 bits of 32-bit value.
2163 ENUM
2164 BFD_RELOC_MIPS16_HI16_S
2165 ENUMDOC
2166 MIPS16 high 16 bits of 32-bit value but the low 16 bits will be sign
2167 extended and added to form the final result. If the low 16
2168 bits form a negative number, we need to add one to the high value
2169 to compensate for the borrow when the low bits are added.
2170 ENUM
2171 BFD_RELOC_MIPS16_LO16
2172 ENUMDOC
2173 MIPS16 low 16 bits.
2174
2175 ENUM
2176 BFD_RELOC_MIPS16_TLS_GD
2177 ENUMX
2178 BFD_RELOC_MIPS16_TLS_LDM
2179 ENUMX
2180 BFD_RELOC_MIPS16_TLS_DTPREL_HI16
2181 ENUMX
2182 BFD_RELOC_MIPS16_TLS_DTPREL_LO16
2183 ENUMX
2184 BFD_RELOC_MIPS16_TLS_GOTTPREL
2185 ENUMX
2186 BFD_RELOC_MIPS16_TLS_TPREL_HI16
2187 ENUMX
2188 BFD_RELOC_MIPS16_TLS_TPREL_LO16
2189 ENUMDOC
2190 MIPS16 TLS relocations
2191
2192 ENUM
2193 BFD_RELOC_MIPS_LITERAL
2194 ENUMX
2195 BFD_RELOC_MICROMIPS_LITERAL
2196 ENUMDOC
2197 Relocation against a MIPS literal section.
2198
2199 ENUM
2200 BFD_RELOC_MICROMIPS_7_PCREL_S1
2201 ENUMX
2202 BFD_RELOC_MICROMIPS_10_PCREL_S1
2203 ENUMX
2204 BFD_RELOC_MICROMIPS_16_PCREL_S1
2205 ENUMDOC
2206 microMIPS PC-relative relocations.
2207
2208 ENUM
2209 BFD_RELOC_MIPS16_16_PCREL_S1
2210 ENUMDOC
2211 MIPS16 PC-relative relocation.
2212
2213 ENUM
2214 BFD_RELOC_MIPS_21_PCREL_S2
2215 ENUMX
2216 BFD_RELOC_MIPS_26_PCREL_S2
2217 ENUMX
2218 BFD_RELOC_MIPS_18_PCREL_S3
2219 ENUMX
2220 BFD_RELOC_MIPS_19_PCREL_S2
2221 ENUMDOC
2222 MIPS PC-relative relocations.
2223
2224 ENUM
2225 BFD_RELOC_MICROMIPS_GPREL16
2226 ENUMX
2227 BFD_RELOC_MICROMIPS_HI16
2228 ENUMX
2229 BFD_RELOC_MICROMIPS_HI16_S
2230 ENUMX
2231 BFD_RELOC_MICROMIPS_LO16
2232 ENUMDOC
2233 microMIPS versions of generic BFD relocs.
2234
2235 ENUM
2236 BFD_RELOC_MIPS_GOT16
2237 ENUMX
2238 BFD_RELOC_MICROMIPS_GOT16
2239 ENUMX
2240 BFD_RELOC_MIPS_CALL16
2241 ENUMX
2242 BFD_RELOC_MICROMIPS_CALL16
2243 ENUMX
2244 BFD_RELOC_MIPS_GOT_HI16
2245 ENUMX
2246 BFD_RELOC_MICROMIPS_GOT_HI16
2247 ENUMX
2248 BFD_RELOC_MIPS_GOT_LO16
2249 ENUMX
2250 BFD_RELOC_MICROMIPS_GOT_LO16
2251 ENUMX
2252 BFD_RELOC_MIPS_CALL_HI16
2253 ENUMX
2254 BFD_RELOC_MICROMIPS_CALL_HI16
2255 ENUMX
2256 BFD_RELOC_MIPS_CALL_LO16
2257 ENUMX
2258 BFD_RELOC_MICROMIPS_CALL_LO16
2259 ENUMX
2260 BFD_RELOC_MIPS_SUB
2261 ENUMX
2262 BFD_RELOC_MICROMIPS_SUB
2263 ENUMX
2264 BFD_RELOC_MIPS_GOT_PAGE
2265 ENUMX
2266 BFD_RELOC_MICROMIPS_GOT_PAGE
2267 ENUMX
2268 BFD_RELOC_MIPS_GOT_OFST
2269 ENUMX
2270 BFD_RELOC_MICROMIPS_GOT_OFST
2271 ENUMX
2272 BFD_RELOC_MIPS_GOT_DISP
2273 ENUMX
2274 BFD_RELOC_MICROMIPS_GOT_DISP
2275 ENUMX
2276 BFD_RELOC_MIPS_SHIFT5
2277 ENUMX
2278 BFD_RELOC_MIPS_SHIFT6
2279 ENUMX
2280 BFD_RELOC_MIPS_INSERT_A
2281 ENUMX
2282 BFD_RELOC_MIPS_INSERT_B
2283 ENUMX
2284 BFD_RELOC_MIPS_DELETE
2285 ENUMX
2286 BFD_RELOC_MIPS_HIGHEST
2287 ENUMX
2288 BFD_RELOC_MICROMIPS_HIGHEST
2289 ENUMX
2290 BFD_RELOC_MIPS_HIGHER
2291 ENUMX
2292 BFD_RELOC_MICROMIPS_HIGHER
2293 ENUMX
2294 BFD_RELOC_MIPS_SCN_DISP
2295 ENUMX
2296 BFD_RELOC_MICROMIPS_SCN_DISP
2297 ENUMX
2298 BFD_RELOC_MIPS_REL16
2299 ENUMX
2300 BFD_RELOC_MIPS_RELGOT
2301 ENUMX
2302 BFD_RELOC_MIPS_JALR
2303 ENUMX
2304 BFD_RELOC_MICROMIPS_JALR
2305 ENUMX
2306 BFD_RELOC_MIPS_TLS_DTPMOD32
2307 ENUMX
2308 BFD_RELOC_MIPS_TLS_DTPREL32
2309 ENUMX
2310 BFD_RELOC_MIPS_TLS_DTPMOD64
2311 ENUMX
2312 BFD_RELOC_MIPS_TLS_DTPREL64
2313 ENUMX
2314 BFD_RELOC_MIPS_TLS_GD
2315 ENUMX
2316 BFD_RELOC_MICROMIPS_TLS_GD
2317 ENUMX
2318 BFD_RELOC_MIPS_TLS_LDM
2319 ENUMX
2320 BFD_RELOC_MICROMIPS_TLS_LDM
2321 ENUMX
2322 BFD_RELOC_MIPS_TLS_DTPREL_HI16
2323 ENUMX
2324 BFD_RELOC_MICROMIPS_TLS_DTPREL_HI16
2325 ENUMX
2326 BFD_RELOC_MIPS_TLS_DTPREL_LO16
2327 ENUMX
2328 BFD_RELOC_MICROMIPS_TLS_DTPREL_LO16
2329 ENUMX
2330 BFD_RELOC_MIPS_TLS_GOTTPREL
2331 ENUMX
2332 BFD_RELOC_MICROMIPS_TLS_GOTTPREL
2333 ENUMX
2334 BFD_RELOC_MIPS_TLS_TPREL32
2335 ENUMX
2336 BFD_RELOC_MIPS_TLS_TPREL64
2337 ENUMX
2338 BFD_RELOC_MIPS_TLS_TPREL_HI16
2339 ENUMX
2340 BFD_RELOC_MICROMIPS_TLS_TPREL_HI16
2341 ENUMX
2342 BFD_RELOC_MIPS_TLS_TPREL_LO16
2343 ENUMX
2344 BFD_RELOC_MICROMIPS_TLS_TPREL_LO16
2345 ENUMX
2346 BFD_RELOC_MIPS_EH
2347 ENUMDOC
2348 MIPS ELF relocations.
2349 COMMENT
2350
2351 ENUM
2352 BFD_RELOC_MIPS_COPY
2353 ENUMX
2354 BFD_RELOC_MIPS_JUMP_SLOT
2355 ENUMDOC
2356 MIPS ELF relocations (VxWorks and PLT extensions).
2357 COMMENT
2358
2359 ENUM
2360 BFD_RELOC_MOXIE_10_PCREL
2361 ENUMDOC
2362 Moxie ELF relocations.
2363 COMMENT
2364
2365 ENUM
2366 BFD_RELOC_FT32_10
2367 ENUMX
2368 BFD_RELOC_FT32_20
2369 ENUMX
2370 BFD_RELOC_FT32_17
2371 ENUMX
2372 BFD_RELOC_FT32_18
2373 ENUMX
2374 BFD_RELOC_FT32_RELAX
2375 ENUMX
2376 BFD_RELOC_FT32_SC0
2377 ENUMX
2378 BFD_RELOC_FT32_SC1
2379 ENUMX
2380 BFD_RELOC_FT32_15
2381 ENUMX
2382 BFD_RELOC_FT32_DIFF32
2383 ENUMDOC
2384 FT32 ELF relocations.
2385 COMMENT
2386
2387 ENUM
2388 BFD_RELOC_FRV_LABEL16
2389 ENUMX
2390 BFD_RELOC_FRV_LABEL24
2391 ENUMX
2392 BFD_RELOC_FRV_LO16
2393 ENUMX
2394 BFD_RELOC_FRV_HI16
2395 ENUMX
2396 BFD_RELOC_FRV_GPREL12
2397 ENUMX
2398 BFD_RELOC_FRV_GPRELU12
2399 ENUMX
2400 BFD_RELOC_FRV_GPREL32
2401 ENUMX
2402 BFD_RELOC_FRV_GPRELHI
2403 ENUMX
2404 BFD_RELOC_FRV_GPRELLO
2405 ENUMX
2406 BFD_RELOC_FRV_GOT12
2407 ENUMX
2408 BFD_RELOC_FRV_GOTHI
2409 ENUMX
2410 BFD_RELOC_FRV_GOTLO
2411 ENUMX
2412 BFD_RELOC_FRV_FUNCDESC
2413 ENUMX
2414 BFD_RELOC_FRV_FUNCDESC_GOT12
2415 ENUMX
2416 BFD_RELOC_FRV_FUNCDESC_GOTHI
2417 ENUMX
2418 BFD_RELOC_FRV_FUNCDESC_GOTLO
2419 ENUMX
2420 BFD_RELOC_FRV_FUNCDESC_VALUE
2421 ENUMX
2422 BFD_RELOC_FRV_FUNCDESC_GOTOFF12
2423 ENUMX
2424 BFD_RELOC_FRV_FUNCDESC_GOTOFFHI
2425 ENUMX
2426 BFD_RELOC_FRV_FUNCDESC_GOTOFFLO
2427 ENUMX
2428 BFD_RELOC_FRV_GOTOFF12
2429 ENUMX
2430 BFD_RELOC_FRV_GOTOFFHI
2431 ENUMX
2432 BFD_RELOC_FRV_GOTOFFLO
2433 ENUMX
2434 BFD_RELOC_FRV_GETTLSOFF
2435 ENUMX
2436 BFD_RELOC_FRV_TLSDESC_VALUE
2437 ENUMX
2438 BFD_RELOC_FRV_GOTTLSDESC12
2439 ENUMX
2440 BFD_RELOC_FRV_GOTTLSDESCHI
2441 ENUMX
2442 BFD_RELOC_FRV_GOTTLSDESCLO
2443 ENUMX
2444 BFD_RELOC_FRV_TLSMOFF12
2445 ENUMX
2446 BFD_RELOC_FRV_TLSMOFFHI
2447 ENUMX
2448 BFD_RELOC_FRV_TLSMOFFLO
2449 ENUMX
2450 BFD_RELOC_FRV_GOTTLSOFF12
2451 ENUMX
2452 BFD_RELOC_FRV_GOTTLSOFFHI
2453 ENUMX
2454 BFD_RELOC_FRV_GOTTLSOFFLO
2455 ENUMX
2456 BFD_RELOC_FRV_TLSOFF
2457 ENUMX
2458 BFD_RELOC_FRV_TLSDESC_RELAX
2459 ENUMX
2460 BFD_RELOC_FRV_GETTLSOFF_RELAX
2461 ENUMX
2462 BFD_RELOC_FRV_TLSOFF_RELAX
2463 ENUMX
2464 BFD_RELOC_FRV_TLSMOFF
2465 ENUMDOC
2466 Fujitsu Frv Relocations.
2467 COMMENT
2468
2469 ENUM
2470 BFD_RELOC_MN10300_GOTOFF24
2471 ENUMDOC
2472 This is a 24bit GOT-relative reloc for the mn10300.
2473 ENUM
2474 BFD_RELOC_MN10300_GOT32
2475 ENUMDOC
2476 This is a 32bit GOT-relative reloc for the mn10300, offset by two bytes
2477 in the instruction.
2478 ENUM
2479 BFD_RELOC_MN10300_GOT24
2480 ENUMDOC
2481 This is a 24bit GOT-relative reloc for the mn10300, offset by two bytes
2482 in the instruction.
2483 ENUM
2484 BFD_RELOC_MN10300_GOT16
2485 ENUMDOC
2486 This is a 16bit GOT-relative reloc for the mn10300, offset by two bytes
2487 in the instruction.
2488 ENUM
2489 BFD_RELOC_MN10300_COPY
2490 ENUMDOC
2491 Copy symbol at runtime.
2492 ENUM
2493 BFD_RELOC_MN10300_GLOB_DAT
2494 ENUMDOC
2495 Create GOT entry.
2496 ENUM
2497 BFD_RELOC_MN10300_JMP_SLOT
2498 ENUMDOC
2499 Create PLT entry.
2500 ENUM
2501 BFD_RELOC_MN10300_RELATIVE
2502 ENUMDOC
2503 Adjust by program base.
2504 ENUM
2505 BFD_RELOC_MN10300_SYM_DIFF
2506 ENUMDOC
2507 Together with another reloc targeted at the same location,
2508 allows for a value that is the difference of two symbols
2509 in the same section.
2510 ENUM
2511 BFD_RELOC_MN10300_ALIGN
2512 ENUMDOC
2513 The addend of this reloc is an alignment power that must
2514 be honoured at the offset's location, regardless of linker
2515 relaxation.
2516 ENUM
2517 BFD_RELOC_MN10300_TLS_GD
2518 ENUMX
2519 BFD_RELOC_MN10300_TLS_LD
2520 ENUMX
2521 BFD_RELOC_MN10300_TLS_LDO
2522 ENUMX
2523 BFD_RELOC_MN10300_TLS_GOTIE
2524 ENUMX
2525 BFD_RELOC_MN10300_TLS_IE
2526 ENUMX
2527 BFD_RELOC_MN10300_TLS_LE
2528 ENUMX
2529 BFD_RELOC_MN10300_TLS_DTPMOD
2530 ENUMX
2531 BFD_RELOC_MN10300_TLS_DTPOFF
2532 ENUMX
2533 BFD_RELOC_MN10300_TLS_TPOFF
2534 ENUMDOC
2535 Various TLS-related relocations.
2536 ENUM
2537 BFD_RELOC_MN10300_32_PCREL
2538 ENUMDOC
2539 This is a 32bit pcrel reloc for the mn10300, offset by two bytes in the
2540 instruction.
2541 ENUM
2542 BFD_RELOC_MN10300_16_PCREL
2543 ENUMDOC
2544 This is a 16bit pcrel reloc for the mn10300, offset by two bytes in the
2545 instruction.
2546 COMMENT
2547
2548 ENUM
2549 BFD_RELOC_386_GOT32
2550 ENUMX
2551 BFD_RELOC_386_PLT32
2552 ENUMX
2553 BFD_RELOC_386_COPY
2554 ENUMX
2555 BFD_RELOC_386_GLOB_DAT
2556 ENUMX
2557 BFD_RELOC_386_JUMP_SLOT
2558 ENUMX
2559 BFD_RELOC_386_RELATIVE
2560 ENUMX
2561 BFD_RELOC_386_GOTOFF
2562 ENUMX
2563 BFD_RELOC_386_GOTPC
2564 ENUMX
2565 BFD_RELOC_386_TLS_TPOFF
2566 ENUMX
2567 BFD_RELOC_386_TLS_IE
2568 ENUMX
2569 BFD_RELOC_386_TLS_GOTIE
2570 ENUMX
2571 BFD_RELOC_386_TLS_LE
2572 ENUMX
2573 BFD_RELOC_386_TLS_GD
2574 ENUMX
2575 BFD_RELOC_386_TLS_LDM
2576 ENUMX
2577 BFD_RELOC_386_TLS_LDO_32
2578 ENUMX
2579 BFD_RELOC_386_TLS_IE_32
2580 ENUMX
2581 BFD_RELOC_386_TLS_LE_32
2582 ENUMX
2583 BFD_RELOC_386_TLS_DTPMOD32
2584 ENUMX
2585 BFD_RELOC_386_TLS_DTPOFF32
2586 ENUMX
2587 BFD_RELOC_386_TLS_TPOFF32
2588 ENUMX
2589 BFD_RELOC_386_TLS_GOTDESC
2590 ENUMX
2591 BFD_RELOC_386_TLS_DESC_CALL
2592 ENUMX
2593 BFD_RELOC_386_TLS_DESC
2594 ENUMX
2595 BFD_RELOC_386_IRELATIVE
2596 ENUMX
2597 BFD_RELOC_386_GOT32X
2598 ENUMDOC
2599 i386/elf relocations
2600
2601 ENUM
2602 BFD_RELOC_X86_64_GOT32
2603 ENUMX
2604 BFD_RELOC_X86_64_PLT32
2605 ENUMX
2606 BFD_RELOC_X86_64_COPY
2607 ENUMX
2608 BFD_RELOC_X86_64_GLOB_DAT
2609 ENUMX
2610 BFD_RELOC_X86_64_JUMP_SLOT
2611 ENUMX
2612 BFD_RELOC_X86_64_RELATIVE
2613 ENUMX
2614 BFD_RELOC_X86_64_GOTPCREL
2615 ENUMX
2616 BFD_RELOC_X86_64_32S
2617 ENUMX
2618 BFD_RELOC_X86_64_DTPMOD64
2619 ENUMX
2620 BFD_RELOC_X86_64_DTPOFF64
2621 ENUMX
2622 BFD_RELOC_X86_64_TPOFF64
2623 ENUMX
2624 BFD_RELOC_X86_64_TLSGD
2625 ENUMX
2626 BFD_RELOC_X86_64_TLSLD
2627 ENUMX
2628 BFD_RELOC_X86_64_DTPOFF32
2629 ENUMX
2630 BFD_RELOC_X86_64_GOTTPOFF
2631 ENUMX
2632 BFD_RELOC_X86_64_TPOFF32
2633 ENUMX
2634 BFD_RELOC_X86_64_GOTOFF64
2635 ENUMX
2636 BFD_RELOC_X86_64_GOTPC32
2637 ENUMX
2638 BFD_RELOC_X86_64_GOT64
2639 ENUMX
2640 BFD_RELOC_X86_64_GOTPCREL64
2641 ENUMX
2642 BFD_RELOC_X86_64_GOTPC64
2643 ENUMX
2644 BFD_RELOC_X86_64_GOTPLT64
2645 ENUMX
2646 BFD_RELOC_X86_64_PLTOFF64
2647 ENUMX
2648 BFD_RELOC_X86_64_GOTPC32_TLSDESC
2649 ENUMX
2650 BFD_RELOC_X86_64_TLSDESC_CALL
2651 ENUMX
2652 BFD_RELOC_X86_64_TLSDESC
2653 ENUMX
2654 BFD_RELOC_X86_64_IRELATIVE
2655 ENUMX
2656 BFD_RELOC_X86_64_PC32_BND
2657 ENUMX
2658 BFD_RELOC_X86_64_PLT32_BND
2659 ENUMX
2660 BFD_RELOC_X86_64_GOTPCRELX
2661 ENUMX
2662 BFD_RELOC_X86_64_REX_GOTPCRELX
2663 ENUMDOC
2664 x86-64/elf relocations
2665
2666 ENUM
2667 BFD_RELOC_NS32K_IMM_8
2668 ENUMX
2669 BFD_RELOC_NS32K_IMM_16
2670 ENUMX
2671 BFD_RELOC_NS32K_IMM_32
2672 ENUMX
2673 BFD_RELOC_NS32K_IMM_8_PCREL
2674 ENUMX
2675 BFD_RELOC_NS32K_IMM_16_PCREL
2676 ENUMX
2677 BFD_RELOC_NS32K_IMM_32_PCREL
2678 ENUMX
2679 BFD_RELOC_NS32K_DISP_8
2680 ENUMX
2681 BFD_RELOC_NS32K_DISP_16
2682 ENUMX
2683 BFD_RELOC_NS32K_DISP_32
2684 ENUMX
2685 BFD_RELOC_NS32K_DISP_8_PCREL
2686 ENUMX
2687 BFD_RELOC_NS32K_DISP_16_PCREL
2688 ENUMX
2689 BFD_RELOC_NS32K_DISP_32_PCREL
2690 ENUMDOC
2691 ns32k relocations
2692
2693 ENUM
2694 BFD_RELOC_PDP11_DISP_8_PCREL
2695 ENUMX
2696 BFD_RELOC_PDP11_DISP_6_PCREL
2697 ENUMDOC
2698 PDP11 relocations
2699
2700 ENUM
2701 BFD_RELOC_PJ_CODE_HI16
2702 ENUMX
2703 BFD_RELOC_PJ_CODE_LO16
2704 ENUMX
2705 BFD_RELOC_PJ_CODE_DIR16
2706 ENUMX
2707 BFD_RELOC_PJ_CODE_DIR32
2708 ENUMX
2709 BFD_RELOC_PJ_CODE_REL16
2710 ENUMX
2711 BFD_RELOC_PJ_CODE_REL32
2712 ENUMDOC
2713 Picojava relocs. Not all of these appear in object files.
2714
2715 ENUM
2716 BFD_RELOC_PPC_B26
2717 ENUMX
2718 BFD_RELOC_PPC_BA26
2719 ENUMX
2720 BFD_RELOC_PPC_TOC16
2721 ENUMX
2722 BFD_RELOC_PPC_B16
2723 ENUMX
2724 BFD_RELOC_PPC_B16_BRTAKEN
2725 ENUMX
2726 BFD_RELOC_PPC_B16_BRNTAKEN
2727 ENUMX
2728 BFD_RELOC_PPC_BA16
2729 ENUMX
2730 BFD_RELOC_PPC_BA16_BRTAKEN
2731 ENUMX
2732 BFD_RELOC_PPC_BA16_BRNTAKEN
2733 ENUMX
2734 BFD_RELOC_PPC_COPY
2735 ENUMX
2736 BFD_RELOC_PPC_GLOB_DAT
2737 ENUMX
2738 BFD_RELOC_PPC_JMP_SLOT
2739 ENUMX
2740 BFD_RELOC_PPC_RELATIVE
2741 ENUMX
2742 BFD_RELOC_PPC_LOCAL24PC
2743 ENUMX
2744 BFD_RELOC_PPC_EMB_NADDR32
2745 ENUMX
2746 BFD_RELOC_PPC_EMB_NADDR16
2747 ENUMX
2748 BFD_RELOC_PPC_EMB_NADDR16_LO
2749 ENUMX
2750 BFD_RELOC_PPC_EMB_NADDR16_HI
2751 ENUMX
2752 BFD_RELOC_PPC_EMB_NADDR16_HA
2753 ENUMX
2754 BFD_RELOC_PPC_EMB_SDAI16
2755 ENUMX
2756 BFD_RELOC_PPC_EMB_SDA2I16
2757 ENUMX
2758 BFD_RELOC_PPC_EMB_SDA2REL
2759 ENUMX
2760 BFD_RELOC_PPC_EMB_SDA21
2761 ENUMX
2762 BFD_RELOC_PPC_EMB_MRKREF
2763 ENUMX
2764 BFD_RELOC_PPC_EMB_RELSEC16
2765 ENUMX
2766 BFD_RELOC_PPC_EMB_RELST_LO
2767 ENUMX
2768 BFD_RELOC_PPC_EMB_RELST_HI
2769 ENUMX
2770 BFD_RELOC_PPC_EMB_RELST_HA
2771 ENUMX
2772 BFD_RELOC_PPC_EMB_BIT_FLD
2773 ENUMX
2774 BFD_RELOC_PPC_EMB_RELSDA
2775 ENUMX
2776 BFD_RELOC_PPC_VLE_REL8
2777 ENUMX
2778 BFD_RELOC_PPC_VLE_REL15
2779 ENUMX
2780 BFD_RELOC_PPC_VLE_REL24
2781 ENUMX
2782 BFD_RELOC_PPC_VLE_LO16A
2783 ENUMX
2784 BFD_RELOC_PPC_VLE_LO16D
2785 ENUMX
2786 BFD_RELOC_PPC_VLE_HI16A
2787 ENUMX
2788 BFD_RELOC_PPC_VLE_HI16D
2789 ENUMX
2790 BFD_RELOC_PPC_VLE_HA16A
2791 ENUMX
2792 BFD_RELOC_PPC_VLE_HA16D
2793 ENUMX
2794 BFD_RELOC_PPC_VLE_SDA21
2795 ENUMX
2796 BFD_RELOC_PPC_VLE_SDA21_LO
2797 ENUMX
2798 BFD_RELOC_PPC_VLE_SDAREL_LO16A
2799 ENUMX
2800 BFD_RELOC_PPC_VLE_SDAREL_LO16D
2801 ENUMX
2802 BFD_RELOC_PPC_VLE_SDAREL_HI16A
2803 ENUMX
2804 BFD_RELOC_PPC_VLE_SDAREL_HI16D
2805 ENUMX
2806 BFD_RELOC_PPC_VLE_SDAREL_HA16A
2807 ENUMX
2808 BFD_RELOC_PPC_VLE_SDAREL_HA16D
2809 ENUMX
2810 BFD_RELOC_PPC_16DX_HA
2811 ENUMX
2812 BFD_RELOC_PPC_REL16DX_HA
2813 ENUMX
2814 BFD_RELOC_PPC64_HIGHER
2815 ENUMX
2816 BFD_RELOC_PPC64_HIGHER_S
2817 ENUMX
2818 BFD_RELOC_PPC64_HIGHEST
2819 ENUMX
2820 BFD_RELOC_PPC64_HIGHEST_S
2821 ENUMX
2822 BFD_RELOC_PPC64_TOC16_LO
2823 ENUMX
2824 BFD_RELOC_PPC64_TOC16_HI
2825 ENUMX
2826 BFD_RELOC_PPC64_TOC16_HA
2827 ENUMX
2828 BFD_RELOC_PPC64_TOC
2829 ENUMX
2830 BFD_RELOC_PPC64_PLTGOT16
2831 ENUMX
2832 BFD_RELOC_PPC64_PLTGOT16_LO
2833 ENUMX
2834 BFD_RELOC_PPC64_PLTGOT16_HI
2835 ENUMX
2836 BFD_RELOC_PPC64_PLTGOT16_HA
2837 ENUMX
2838 BFD_RELOC_PPC64_ADDR16_DS
2839 ENUMX
2840 BFD_RELOC_PPC64_ADDR16_LO_DS
2841 ENUMX
2842 BFD_RELOC_PPC64_GOT16_DS
2843 ENUMX
2844 BFD_RELOC_PPC64_GOT16_LO_DS
2845 ENUMX
2846 BFD_RELOC_PPC64_PLT16_LO_DS
2847 ENUMX
2848 BFD_RELOC_PPC64_SECTOFF_DS
2849 ENUMX
2850 BFD_RELOC_PPC64_SECTOFF_LO_DS
2851 ENUMX
2852 BFD_RELOC_PPC64_TOC16_DS
2853 ENUMX
2854 BFD_RELOC_PPC64_TOC16_LO_DS
2855 ENUMX
2856 BFD_RELOC_PPC64_PLTGOT16_DS
2857 ENUMX
2858 BFD_RELOC_PPC64_PLTGOT16_LO_DS
2859 ENUMX
2860 BFD_RELOC_PPC64_ADDR16_HIGH
2861 ENUMX
2862 BFD_RELOC_PPC64_ADDR16_HIGHA
2863 ENUMX
2864 BFD_RELOC_PPC64_REL16_HIGH
2865 ENUMX
2866 BFD_RELOC_PPC64_REL16_HIGHA
2867 ENUMX
2868 BFD_RELOC_PPC64_REL16_HIGHER
2869 ENUMX
2870 BFD_RELOC_PPC64_REL16_HIGHERA
2871 ENUMX
2872 BFD_RELOC_PPC64_REL16_HIGHEST
2873 ENUMX
2874 BFD_RELOC_PPC64_REL16_HIGHESTA
2875 ENUMX
2876 BFD_RELOC_PPC64_ADDR64_LOCAL
2877 ENUMX
2878 BFD_RELOC_PPC64_ENTRY
2879 ENUMX
2880 BFD_RELOC_PPC64_REL24_NOTOC
2881 ENUMX
2882 BFD_RELOC_PPC64_D34
2883 ENUMX
2884 BFD_RELOC_PPC64_D34_LO
2885 ENUMX
2886 BFD_RELOC_PPC64_D34_HI30
2887 ENUMX
2888 BFD_RELOC_PPC64_D34_HA30
2889 ENUMX
2890 BFD_RELOC_PPC64_PCREL34
2891 ENUMX
2892 BFD_RELOC_PPC64_GOT_PCREL34
2893 ENUMX
2894 BFD_RELOC_PPC64_PLT_PCREL34
2895 ENUMX
2896 BFD_RELOC_PPC64_ADDR16_HIGHER34
2897 ENUMX
2898 BFD_RELOC_PPC64_ADDR16_HIGHERA34
2899 ENUMX
2900 BFD_RELOC_PPC64_ADDR16_HIGHEST34
2901 ENUMX
2902 BFD_RELOC_PPC64_ADDR16_HIGHESTA34
2903 ENUMX
2904 BFD_RELOC_PPC64_REL16_HIGHER34
2905 ENUMX
2906 BFD_RELOC_PPC64_REL16_HIGHERA34
2907 ENUMX
2908 BFD_RELOC_PPC64_REL16_HIGHEST34
2909 ENUMX
2910 BFD_RELOC_PPC64_REL16_HIGHESTA34
2911 ENUMX
2912 BFD_RELOC_PPC64_D28
2913 ENUMX
2914 BFD_RELOC_PPC64_PCREL28
2915 ENUMDOC
2916 Power(rs6000) and PowerPC relocations.
2917
2918 ENUM
2919 BFD_RELOC_PPC_TLS
2920 ENUMX
2921 BFD_RELOC_PPC_TLSGD
2922 ENUMX
2923 BFD_RELOC_PPC_TLSLD
2924 ENUMX
2925 BFD_RELOC_PPC_DTPMOD
2926 ENUMX
2927 BFD_RELOC_PPC_TPREL16
2928 ENUMX
2929 BFD_RELOC_PPC_TPREL16_LO
2930 ENUMX
2931 BFD_RELOC_PPC_TPREL16_HI
2932 ENUMX
2933 BFD_RELOC_PPC_TPREL16_HA
2934 ENUMX
2935 BFD_RELOC_PPC_TPREL
2936 ENUMX
2937 BFD_RELOC_PPC_DTPREL16
2938 ENUMX
2939 BFD_RELOC_PPC_DTPREL16_LO
2940 ENUMX
2941 BFD_RELOC_PPC_DTPREL16_HI
2942 ENUMX
2943 BFD_RELOC_PPC_DTPREL16_HA
2944 ENUMX
2945 BFD_RELOC_PPC_DTPREL
2946 ENUMX
2947 BFD_RELOC_PPC_GOT_TLSGD16
2948 ENUMX
2949 BFD_RELOC_PPC_GOT_TLSGD16_LO
2950 ENUMX
2951 BFD_RELOC_PPC_GOT_TLSGD16_HI
2952 ENUMX
2953 BFD_RELOC_PPC_GOT_TLSGD16_HA
2954 ENUMX
2955 BFD_RELOC_PPC_GOT_TLSLD16
2956 ENUMX
2957 BFD_RELOC_PPC_GOT_TLSLD16_LO
2958 ENUMX
2959 BFD_RELOC_PPC_GOT_TLSLD16_HI
2960 ENUMX
2961 BFD_RELOC_PPC_GOT_TLSLD16_HA
2962 ENUMX
2963 BFD_RELOC_PPC_GOT_TPREL16
2964 ENUMX
2965 BFD_RELOC_PPC_GOT_TPREL16_LO
2966 ENUMX
2967 BFD_RELOC_PPC_GOT_TPREL16_HI
2968 ENUMX
2969 BFD_RELOC_PPC_GOT_TPREL16_HA
2970 ENUMX
2971 BFD_RELOC_PPC_GOT_DTPREL16
2972 ENUMX
2973 BFD_RELOC_PPC_GOT_DTPREL16_LO
2974 ENUMX
2975 BFD_RELOC_PPC_GOT_DTPREL16_HI
2976 ENUMX
2977 BFD_RELOC_PPC_GOT_DTPREL16_HA
2978 ENUMX
2979 BFD_RELOC_PPC64_TPREL16_DS
2980 ENUMX
2981 BFD_RELOC_PPC64_TPREL16_LO_DS
2982 ENUMX
2983 BFD_RELOC_PPC64_TPREL16_HIGH
2984 ENUMX
2985 BFD_RELOC_PPC64_TPREL16_HIGHA
2986 ENUMX
2987 BFD_RELOC_PPC64_TPREL16_HIGHER
2988 ENUMX
2989 BFD_RELOC_PPC64_TPREL16_HIGHERA
2990 ENUMX
2991 BFD_RELOC_PPC64_TPREL16_HIGHEST
2992 ENUMX
2993 BFD_RELOC_PPC64_TPREL16_HIGHESTA
2994 ENUMX
2995 BFD_RELOC_PPC64_DTPREL16_DS
2996 ENUMX
2997 BFD_RELOC_PPC64_DTPREL16_LO_DS
2998 ENUMX
2999 BFD_RELOC_PPC64_DTPREL16_HIGH
3000 ENUMX
3001 BFD_RELOC_PPC64_DTPREL16_HIGHA
3002 ENUMX
3003 BFD_RELOC_PPC64_DTPREL16_HIGHER
3004 ENUMX
3005 BFD_RELOC_PPC64_DTPREL16_HIGHERA
3006 ENUMX
3007 BFD_RELOC_PPC64_DTPREL16_HIGHEST
3008 ENUMX
3009 BFD_RELOC_PPC64_DTPREL16_HIGHESTA
3010 ENUMDOC
3011 PowerPC and PowerPC64 thread-local storage relocations.
3012
3013 ENUM
3014 BFD_RELOC_I370_D12
3015 ENUMDOC
3016 IBM 370/390 relocations
3017
3018 ENUM
3019 BFD_RELOC_CTOR
3020 ENUMDOC
3021 The type of reloc used to build a constructor table - at the moment
3022 probably a 32 bit wide absolute relocation, but the target can choose.
3023 It generally does map to one of the other relocation types.
3024
3025 ENUM
3026 BFD_RELOC_ARM_PCREL_BRANCH
3027 ENUMDOC
3028 ARM 26 bit pc-relative branch. The lowest two bits must be zero and are
3029 not stored in the instruction.
3030 ENUM
3031 BFD_RELOC_ARM_PCREL_BLX
3032 ENUMDOC
3033 ARM 26 bit pc-relative branch. The lowest bit must be zero and is
3034 not stored in the instruction. The 2nd lowest bit comes from a 1 bit
3035 field in the instruction.
3036 ENUM
3037 BFD_RELOC_THUMB_PCREL_BLX
3038 ENUMDOC
3039 Thumb 22 bit pc-relative branch. The lowest bit must be zero and is
3040 not stored in the instruction. The 2nd lowest bit comes from a 1 bit
3041 field in the instruction.
3042 ENUM
3043 BFD_RELOC_ARM_PCREL_CALL
3044 ENUMDOC
3045 ARM 26-bit pc-relative branch for an unconditional BL or BLX instruction.
3046 ENUM
3047 BFD_RELOC_ARM_PCREL_JUMP
3048 ENUMDOC
3049 ARM 26-bit pc-relative branch for B or conditional BL instruction.
3050
3051 ENUM
3052 BFD_RELOC_THUMB_PCREL_BRANCH5
3053 ENUMDOC
3054 ARM 5-bit pc-relative branch for Branch Future instructions.
3055
3056 ENUM
3057 BFD_RELOC_THUMB_PCREL_BFCSEL
3058 ENUMDOC
3059 ARM 6-bit pc-relative branch for BFCSEL instruction.
3060
3061 ENUM
3062 BFD_RELOC_ARM_THUMB_BF17
3063 ENUMDOC
3064 ARM 17-bit pc-relative branch for Branch Future instructions.
3065
3066 ENUM
3067 BFD_RELOC_ARM_THUMB_BF13
3068 ENUMDOC
3069 ARM 13-bit pc-relative branch for BFCSEL instruction.
3070
3071 ENUM
3072 BFD_RELOC_ARM_THUMB_BF19
3073 ENUMDOC
3074 ARM 19-bit pc-relative branch for Branch Future Link instruction.
3075
3076 ENUM
3077 BFD_RELOC_ARM_THUMB_LOOP12
3078 ENUMDOC
3079 ARM 12-bit pc-relative branch for Low Overhead Loop instructions.
3080
3081 ENUM
3082 BFD_RELOC_THUMB_PCREL_BRANCH7
3083 ENUMX
3084 BFD_RELOC_THUMB_PCREL_BRANCH9
3085 ENUMX
3086 BFD_RELOC_THUMB_PCREL_BRANCH12
3087 ENUMX
3088 BFD_RELOC_THUMB_PCREL_BRANCH20
3089 ENUMX
3090 BFD_RELOC_THUMB_PCREL_BRANCH23
3091 ENUMX
3092 BFD_RELOC_THUMB_PCREL_BRANCH25
3093 ENUMDOC
3094 Thumb 7-, 9-, 12-, 20-, 23-, and 25-bit pc-relative branches.
3095 The lowest bit must be zero and is not stored in the instruction.
3096 Note that the corresponding ELF R_ARM_THM_JUMPnn constant has an
3097 "nn" one smaller in all cases. Note further that BRANCH23
3098 corresponds to R_ARM_THM_CALL.
3099
3100 ENUM
3101 BFD_RELOC_ARM_OFFSET_IMM
3102 ENUMDOC
3103 12-bit immediate offset, used in ARM-format ldr and str instructions.
3104
3105 ENUM
3106 BFD_RELOC_ARM_THUMB_OFFSET
3107 ENUMDOC
3108 5-bit immediate offset, used in Thumb-format ldr and str instructions.
3109
3110 ENUM
3111 BFD_RELOC_ARM_TARGET1
3112 ENUMDOC
3113 Pc-relative or absolute relocation depending on target. Used for
3114 entries in .init_array sections.
3115 ENUM
3116 BFD_RELOC_ARM_ROSEGREL32
3117 ENUMDOC
3118 Read-only segment base relative address.
3119 ENUM
3120 BFD_RELOC_ARM_SBREL32
3121 ENUMDOC
3122 Data segment base relative address.
3123 ENUM
3124 BFD_RELOC_ARM_TARGET2
3125 ENUMDOC
3126 This reloc is used for references to RTTI data from exception handling
3127 tables. The actual definition depends on the target. It may be a
3128 pc-relative or some form of GOT-indirect relocation.
3129 ENUM
3130 BFD_RELOC_ARM_PREL31
3131 ENUMDOC
3132 31-bit PC relative address.
3133 ENUM
3134 BFD_RELOC_ARM_MOVW
3135 ENUMX
3136 BFD_RELOC_ARM_MOVT
3137 ENUMX
3138 BFD_RELOC_ARM_MOVW_PCREL
3139 ENUMX
3140 BFD_RELOC_ARM_MOVT_PCREL
3141 ENUMX
3142 BFD_RELOC_ARM_THUMB_MOVW
3143 ENUMX
3144 BFD_RELOC_ARM_THUMB_MOVT
3145 ENUMX
3146 BFD_RELOC_ARM_THUMB_MOVW_PCREL
3147 ENUMX
3148 BFD_RELOC_ARM_THUMB_MOVT_PCREL
3149 ENUMDOC
3150 Low and High halfword relocations for MOVW and MOVT instructions.
3151
3152 ENUM
3153 BFD_RELOC_ARM_GOTFUNCDESC
3154 ENUMX
3155 BFD_RELOC_ARM_GOTOFFFUNCDESC
3156 ENUMX
3157 BFD_RELOC_ARM_FUNCDESC
3158 ENUMX
3159 BFD_RELOC_ARM_FUNCDESC_VALUE
3160 ENUMX
3161 BFD_RELOC_ARM_TLS_GD32_FDPIC
3162 ENUMX
3163 BFD_RELOC_ARM_TLS_LDM32_FDPIC
3164 ENUMX
3165 BFD_RELOC_ARM_TLS_IE32_FDPIC
3166 ENUMDOC
3167 ARM FDPIC specific relocations.
3168
3169 ENUM
3170 BFD_RELOC_ARM_JUMP_SLOT
3171 ENUMX
3172 BFD_RELOC_ARM_GLOB_DAT
3173 ENUMX
3174 BFD_RELOC_ARM_GOT32
3175 ENUMX
3176 BFD_RELOC_ARM_PLT32
3177 ENUMX
3178 BFD_RELOC_ARM_RELATIVE
3179 ENUMX
3180 BFD_RELOC_ARM_GOTOFF
3181 ENUMX
3182 BFD_RELOC_ARM_GOTPC
3183 ENUMX
3184 BFD_RELOC_ARM_GOT_PREL
3185 ENUMDOC
3186 Relocations for setting up GOTs and PLTs for shared libraries.
3187
3188 ENUM
3189 BFD_RELOC_ARM_TLS_GD32
3190 ENUMX
3191 BFD_RELOC_ARM_TLS_LDO32
3192 ENUMX
3193 BFD_RELOC_ARM_TLS_LDM32
3194 ENUMX
3195 BFD_RELOC_ARM_TLS_DTPOFF32
3196 ENUMX
3197 BFD_RELOC_ARM_TLS_DTPMOD32
3198 ENUMX
3199 BFD_RELOC_ARM_TLS_TPOFF32
3200 ENUMX
3201 BFD_RELOC_ARM_TLS_IE32
3202 ENUMX
3203 BFD_RELOC_ARM_TLS_LE32
3204 ENUMX
3205 BFD_RELOC_ARM_TLS_GOTDESC
3206 ENUMX
3207 BFD_RELOC_ARM_TLS_CALL
3208 ENUMX
3209 BFD_RELOC_ARM_THM_TLS_CALL
3210 ENUMX
3211 BFD_RELOC_ARM_TLS_DESCSEQ
3212 ENUMX
3213 BFD_RELOC_ARM_THM_TLS_DESCSEQ
3214 ENUMX
3215 BFD_RELOC_ARM_TLS_DESC
3216 ENUMDOC
3217 ARM thread-local storage relocations.
3218
3219 ENUM
3220 BFD_RELOC_ARM_ALU_PC_G0_NC
3221 ENUMX
3222 BFD_RELOC_ARM_ALU_PC_G0
3223 ENUMX
3224 BFD_RELOC_ARM_ALU_PC_G1_NC
3225 ENUMX
3226 BFD_RELOC_ARM_ALU_PC_G1
3227 ENUMX
3228 BFD_RELOC_ARM_ALU_PC_G2
3229 ENUMX
3230 BFD_RELOC_ARM_LDR_PC_G0
3231 ENUMX
3232 BFD_RELOC_ARM_LDR_PC_G1
3233 ENUMX
3234 BFD_RELOC_ARM_LDR_PC_G2
3235 ENUMX
3236 BFD_RELOC_ARM_LDRS_PC_G0
3237 ENUMX
3238 BFD_RELOC_ARM_LDRS_PC_G1
3239 ENUMX
3240 BFD_RELOC_ARM_LDRS_PC_G2
3241 ENUMX
3242 BFD_RELOC_ARM_LDC_PC_G0
3243 ENUMX
3244 BFD_RELOC_ARM_LDC_PC_G1
3245 ENUMX
3246 BFD_RELOC_ARM_LDC_PC_G2
3247 ENUMX
3248 BFD_RELOC_ARM_ALU_SB_G0_NC
3249 ENUMX
3250 BFD_RELOC_ARM_ALU_SB_G0
3251 ENUMX
3252 BFD_RELOC_ARM_ALU_SB_G1_NC
3253 ENUMX
3254 BFD_RELOC_ARM_ALU_SB_G1
3255 ENUMX
3256 BFD_RELOC_ARM_ALU_SB_G2
3257 ENUMX
3258 BFD_RELOC_ARM_LDR_SB_G0
3259 ENUMX
3260 BFD_RELOC_ARM_LDR_SB_G1
3261 ENUMX
3262 BFD_RELOC_ARM_LDR_SB_G2
3263 ENUMX
3264 BFD_RELOC_ARM_LDRS_SB_G0
3265 ENUMX
3266 BFD_RELOC_ARM_LDRS_SB_G1
3267 ENUMX
3268 BFD_RELOC_ARM_LDRS_SB_G2
3269 ENUMX
3270 BFD_RELOC_ARM_LDC_SB_G0
3271 ENUMX
3272 BFD_RELOC_ARM_LDC_SB_G1
3273 ENUMX
3274 BFD_RELOC_ARM_LDC_SB_G2
3275 ENUMDOC
3276 ARM group relocations.
3277
3278 ENUM
3279 BFD_RELOC_ARM_V4BX
3280 ENUMDOC
3281 Annotation of BX instructions.
3282
3283 ENUM
3284 BFD_RELOC_ARM_IRELATIVE
3285 ENUMDOC
3286 ARM support for STT_GNU_IFUNC.
3287
3288 ENUM
3289 BFD_RELOC_ARM_THUMB_ALU_ABS_G0_NC
3290 ENUMX
3291 BFD_RELOC_ARM_THUMB_ALU_ABS_G1_NC
3292 ENUMX
3293 BFD_RELOC_ARM_THUMB_ALU_ABS_G2_NC
3294 ENUMX
3295 BFD_RELOC_ARM_THUMB_ALU_ABS_G3_NC
3296 ENUMDOC
3297 Thumb1 relocations to support execute-only code.
3298
3299 ENUM
3300 BFD_RELOC_ARM_IMMEDIATE
3301 ENUMX
3302 BFD_RELOC_ARM_ADRL_IMMEDIATE
3303 ENUMX
3304 BFD_RELOC_ARM_T32_IMMEDIATE
3305 ENUMX
3306 BFD_RELOC_ARM_T32_ADD_IMM
3307 ENUMX
3308 BFD_RELOC_ARM_T32_IMM12
3309 ENUMX
3310 BFD_RELOC_ARM_T32_ADD_PC12
3311 ENUMX
3312 BFD_RELOC_ARM_SHIFT_IMM
3313 ENUMX
3314 BFD_RELOC_ARM_SMC
3315 ENUMX
3316 BFD_RELOC_ARM_HVC
3317 ENUMX
3318 BFD_RELOC_ARM_SWI
3319 ENUMX
3320 BFD_RELOC_ARM_MULTI
3321 ENUMX
3322 BFD_RELOC_ARM_CP_OFF_IMM
3323 ENUMX
3324 BFD_RELOC_ARM_CP_OFF_IMM_S2
3325 ENUMX
3326 BFD_RELOC_ARM_T32_CP_OFF_IMM
3327 ENUMX
3328 BFD_RELOC_ARM_T32_CP_OFF_IMM_S2
3329 ENUMX
3330 BFD_RELOC_ARM_T32_VLDR_VSTR_OFF_IMM
3331 ENUMX
3332 BFD_RELOC_ARM_ADR_IMM
3333 ENUMX
3334 BFD_RELOC_ARM_LDR_IMM
3335 ENUMX
3336 BFD_RELOC_ARM_LITERAL
3337 ENUMX
3338 BFD_RELOC_ARM_IN_POOL
3339 ENUMX
3340 BFD_RELOC_ARM_OFFSET_IMM8
3341 ENUMX
3342 BFD_RELOC_ARM_T32_OFFSET_U8
3343 ENUMX
3344 BFD_RELOC_ARM_T32_OFFSET_IMM
3345 ENUMX
3346 BFD_RELOC_ARM_HWLITERAL
3347 ENUMX
3348 BFD_RELOC_ARM_THUMB_ADD
3349 ENUMX
3350 BFD_RELOC_ARM_THUMB_IMM
3351 ENUMX
3352 BFD_RELOC_ARM_THUMB_SHIFT
3353 ENUMDOC
3354 These relocs are only used within the ARM assembler. They are not
3355 (at present) written to any object files.
3356
3357 ENUM
3358 BFD_RELOC_SH_PCDISP8BY2
3359 ENUMX
3360 BFD_RELOC_SH_PCDISP12BY2
3361 ENUMX
3362 BFD_RELOC_SH_IMM3
3363 ENUMX
3364 BFD_RELOC_SH_IMM3U
3365 ENUMX
3366 BFD_RELOC_SH_DISP12
3367 ENUMX
3368 BFD_RELOC_SH_DISP12BY2
3369 ENUMX
3370 BFD_RELOC_SH_DISP12BY4
3371 ENUMX
3372 BFD_RELOC_SH_DISP12BY8
3373 ENUMX
3374 BFD_RELOC_SH_DISP20
3375 ENUMX
3376 BFD_RELOC_SH_DISP20BY8
3377 ENUMX
3378 BFD_RELOC_SH_IMM4
3379 ENUMX
3380 BFD_RELOC_SH_IMM4BY2
3381 ENUMX
3382 BFD_RELOC_SH_IMM4BY4
3383 ENUMX
3384 BFD_RELOC_SH_IMM8
3385 ENUMX
3386 BFD_RELOC_SH_IMM8BY2
3387 ENUMX
3388 BFD_RELOC_SH_IMM8BY4
3389 ENUMX
3390 BFD_RELOC_SH_PCRELIMM8BY2
3391 ENUMX
3392 BFD_RELOC_SH_PCRELIMM8BY4
3393 ENUMX
3394 BFD_RELOC_SH_SWITCH16
3395 ENUMX
3396 BFD_RELOC_SH_SWITCH32
3397 ENUMX
3398 BFD_RELOC_SH_USES
3399 ENUMX
3400 BFD_RELOC_SH_COUNT
3401 ENUMX
3402 BFD_RELOC_SH_ALIGN
3403 ENUMX
3404 BFD_RELOC_SH_CODE
3405 ENUMX
3406 BFD_RELOC_SH_DATA
3407 ENUMX
3408 BFD_RELOC_SH_LABEL
3409 ENUMX
3410 BFD_RELOC_SH_LOOP_START
3411 ENUMX
3412 BFD_RELOC_SH_LOOP_END
3413 ENUMX
3414 BFD_RELOC_SH_COPY
3415 ENUMX
3416 BFD_RELOC_SH_GLOB_DAT
3417 ENUMX
3418 BFD_RELOC_SH_JMP_SLOT
3419 ENUMX
3420 BFD_RELOC_SH_RELATIVE
3421 ENUMX
3422 BFD_RELOC_SH_GOTPC
3423 ENUMX
3424 BFD_RELOC_SH_GOT_LOW16
3425 ENUMX
3426 BFD_RELOC_SH_GOT_MEDLOW16
3427 ENUMX
3428 BFD_RELOC_SH_GOT_MEDHI16
3429 ENUMX
3430 BFD_RELOC_SH_GOT_HI16
3431 ENUMX
3432 BFD_RELOC_SH_GOTPLT_LOW16
3433 ENUMX
3434 BFD_RELOC_SH_GOTPLT_MEDLOW16
3435 ENUMX
3436 BFD_RELOC_SH_GOTPLT_MEDHI16
3437 ENUMX
3438 BFD_RELOC_SH_GOTPLT_HI16
3439 ENUMX
3440 BFD_RELOC_SH_PLT_LOW16
3441 ENUMX
3442 BFD_RELOC_SH_PLT_MEDLOW16
3443 ENUMX
3444 BFD_RELOC_SH_PLT_MEDHI16
3445 ENUMX
3446 BFD_RELOC_SH_PLT_HI16
3447 ENUMX
3448 BFD_RELOC_SH_GOTOFF_LOW16
3449 ENUMX
3450 BFD_RELOC_SH_GOTOFF_MEDLOW16
3451 ENUMX
3452 BFD_RELOC_SH_GOTOFF_MEDHI16
3453 ENUMX
3454 BFD_RELOC_SH_GOTOFF_HI16
3455 ENUMX
3456 BFD_RELOC_SH_GOTPC_LOW16
3457 ENUMX
3458 BFD_RELOC_SH_GOTPC_MEDLOW16
3459 ENUMX
3460 BFD_RELOC_SH_GOTPC_MEDHI16
3461 ENUMX
3462 BFD_RELOC_SH_GOTPC_HI16
3463 ENUMX
3464 BFD_RELOC_SH_COPY64
3465 ENUMX
3466 BFD_RELOC_SH_GLOB_DAT64
3467 ENUMX
3468 BFD_RELOC_SH_JMP_SLOT64
3469 ENUMX
3470 BFD_RELOC_SH_RELATIVE64
3471 ENUMX
3472 BFD_RELOC_SH_GOT10BY4
3473 ENUMX
3474 BFD_RELOC_SH_GOT10BY8
3475 ENUMX
3476 BFD_RELOC_SH_GOTPLT10BY4
3477 ENUMX
3478 BFD_RELOC_SH_GOTPLT10BY8
3479 ENUMX
3480 BFD_RELOC_SH_GOTPLT32
3481 ENUMX
3482 BFD_RELOC_SH_SHMEDIA_CODE
3483 ENUMX
3484 BFD_RELOC_SH_IMMU5
3485 ENUMX
3486 BFD_RELOC_SH_IMMS6
3487 ENUMX
3488 BFD_RELOC_SH_IMMS6BY32
3489 ENUMX
3490 BFD_RELOC_SH_IMMU6
3491 ENUMX
3492 BFD_RELOC_SH_IMMS10
3493 ENUMX
3494 BFD_RELOC_SH_IMMS10BY2
3495 ENUMX
3496 BFD_RELOC_SH_IMMS10BY4
3497 ENUMX
3498 BFD_RELOC_SH_IMMS10BY8
3499 ENUMX
3500 BFD_RELOC_SH_IMMS16
3501 ENUMX
3502 BFD_RELOC_SH_IMMU16
3503 ENUMX
3504 BFD_RELOC_SH_IMM_LOW16
3505 ENUMX
3506 BFD_RELOC_SH_IMM_LOW16_PCREL
3507 ENUMX
3508 BFD_RELOC_SH_IMM_MEDLOW16
3509 ENUMX
3510 BFD_RELOC_SH_IMM_MEDLOW16_PCREL
3511 ENUMX
3512 BFD_RELOC_SH_IMM_MEDHI16
3513 ENUMX
3514 BFD_RELOC_SH_IMM_MEDHI16_PCREL
3515 ENUMX
3516 BFD_RELOC_SH_IMM_HI16
3517 ENUMX
3518 BFD_RELOC_SH_IMM_HI16_PCREL
3519 ENUMX
3520 BFD_RELOC_SH_PT_16
3521 ENUMX
3522 BFD_RELOC_SH_TLS_GD_32
3523 ENUMX
3524 BFD_RELOC_SH_TLS_LD_32
3525 ENUMX
3526 BFD_RELOC_SH_TLS_LDO_32
3527 ENUMX
3528 BFD_RELOC_SH_TLS_IE_32
3529 ENUMX
3530 BFD_RELOC_SH_TLS_LE_32
3531 ENUMX
3532 BFD_RELOC_SH_TLS_DTPMOD32
3533 ENUMX
3534 BFD_RELOC_SH_TLS_DTPOFF32
3535 ENUMX
3536 BFD_RELOC_SH_TLS_TPOFF32
3537 ENUMX
3538 BFD_RELOC_SH_GOT20
3539 ENUMX
3540 BFD_RELOC_SH_GOTOFF20
3541 ENUMX
3542 BFD_RELOC_SH_GOTFUNCDESC
3543 ENUMX
3544 BFD_RELOC_SH_GOTFUNCDESC20
3545 ENUMX
3546 BFD_RELOC_SH_GOTOFFFUNCDESC
3547 ENUMX
3548 BFD_RELOC_SH_GOTOFFFUNCDESC20
3549 ENUMX
3550 BFD_RELOC_SH_FUNCDESC
3551 ENUMDOC
3552 Renesas / SuperH SH relocs. Not all of these appear in object files.
3553
3554 ENUM
3555 BFD_RELOC_ARC_NONE
3556 ENUMX
3557 BFD_RELOC_ARC_8
3558 ENUMX
3559 BFD_RELOC_ARC_16
3560 ENUMX
3561 BFD_RELOC_ARC_24
3562 ENUMX
3563 BFD_RELOC_ARC_32
3564 ENUMX
3565 BFD_RELOC_ARC_N8
3566 ENUMX
3567 BFD_RELOC_ARC_N16
3568 ENUMX
3569 BFD_RELOC_ARC_N24
3570 ENUMX
3571 BFD_RELOC_ARC_N32
3572 ENUMX
3573 BFD_RELOC_ARC_SDA
3574 ENUMX
3575 BFD_RELOC_ARC_SECTOFF
3576 ENUMX
3577 BFD_RELOC_ARC_S21H_PCREL
3578 ENUMX
3579 BFD_RELOC_ARC_S21W_PCREL
3580 ENUMX
3581 BFD_RELOC_ARC_S25H_PCREL
3582 ENUMX
3583 BFD_RELOC_ARC_S25W_PCREL
3584 ENUMX
3585 BFD_RELOC_ARC_SDA32
3586 ENUMX
3587 BFD_RELOC_ARC_SDA_LDST
3588 ENUMX
3589 BFD_RELOC_ARC_SDA_LDST1
3590 ENUMX
3591 BFD_RELOC_ARC_SDA_LDST2
3592 ENUMX
3593 BFD_RELOC_ARC_SDA16_LD
3594 ENUMX
3595 BFD_RELOC_ARC_SDA16_LD1
3596 ENUMX
3597 BFD_RELOC_ARC_SDA16_LD2
3598 ENUMX
3599 BFD_RELOC_ARC_S13_PCREL
3600 ENUMX
3601 BFD_RELOC_ARC_W
3602 ENUMX
3603 BFD_RELOC_ARC_32_ME
3604 ENUMX
3605 BFD_RELOC_ARC_32_ME_S
3606 ENUMX
3607 BFD_RELOC_ARC_N32_ME
3608 ENUMX
3609 BFD_RELOC_ARC_SECTOFF_ME
3610 ENUMX
3611 BFD_RELOC_ARC_SDA32_ME
3612 ENUMX
3613 BFD_RELOC_ARC_W_ME
3614 ENUMX
3615 BFD_RELOC_AC_SECTOFF_U8
3616 ENUMX
3617 BFD_RELOC_AC_SECTOFF_U8_1
3618 ENUMX
3619 BFD_RELOC_AC_SECTOFF_U8_2
3620 ENUMX
3621 BFD_RELOC_AC_SECTOFF_S9
3622 ENUMX
3623 BFD_RELOC_AC_SECTOFF_S9_1
3624 ENUMX
3625 BFD_RELOC_AC_SECTOFF_S9_2
3626 ENUMX
3627 BFD_RELOC_ARC_SECTOFF_ME_1
3628 ENUMX
3629 BFD_RELOC_ARC_SECTOFF_ME_2
3630 ENUMX
3631 BFD_RELOC_ARC_SECTOFF_1
3632 ENUMX
3633 BFD_RELOC_ARC_SECTOFF_2
3634 ENUMX
3635 BFD_RELOC_ARC_SDA_12
3636 ENUMX
3637 BFD_RELOC_ARC_SDA16_ST2
3638 ENUMX
3639 BFD_RELOC_ARC_32_PCREL
3640 ENUMX
3641 BFD_RELOC_ARC_PC32
3642 ENUMX
3643 BFD_RELOC_ARC_GOT32
3644 ENUMX
3645 BFD_RELOC_ARC_GOTPC32
3646 ENUMX
3647 BFD_RELOC_ARC_PLT32
3648 ENUMX
3649 BFD_RELOC_ARC_COPY
3650 ENUMX
3651 BFD_RELOC_ARC_GLOB_DAT
3652 ENUMX
3653 BFD_RELOC_ARC_JMP_SLOT
3654 ENUMX
3655 BFD_RELOC_ARC_RELATIVE
3656 ENUMX
3657 BFD_RELOC_ARC_GOTOFF
3658 ENUMX
3659 BFD_RELOC_ARC_GOTPC
3660 ENUMX
3661 BFD_RELOC_ARC_S21W_PCREL_PLT
3662 ENUMX
3663 BFD_RELOC_ARC_S25H_PCREL_PLT
3664 ENUMX
3665 BFD_RELOC_ARC_TLS_DTPMOD
3666 ENUMX
3667 BFD_RELOC_ARC_TLS_TPOFF
3668 ENUMX
3669 BFD_RELOC_ARC_TLS_GD_GOT
3670 ENUMX
3671 BFD_RELOC_ARC_TLS_GD_LD
3672 ENUMX
3673 BFD_RELOC_ARC_TLS_GD_CALL
3674 ENUMX
3675 BFD_RELOC_ARC_TLS_IE_GOT
3676 ENUMX
3677 BFD_RELOC_ARC_TLS_DTPOFF
3678 ENUMX
3679 BFD_RELOC_ARC_TLS_DTPOFF_S9
3680 ENUMX
3681 BFD_RELOC_ARC_TLS_LE_S9
3682 ENUMX
3683 BFD_RELOC_ARC_TLS_LE_32
3684 ENUMX
3685 BFD_RELOC_ARC_S25W_PCREL_PLT
3686 ENUMX
3687 BFD_RELOC_ARC_S21H_PCREL_PLT
3688 ENUMX
3689 BFD_RELOC_ARC_NPS_CMEM16
3690 ENUMX
3691 BFD_RELOC_ARC_JLI_SECTOFF
3692 ENUMDOC
3693 ARC relocs.
3694
3695 ENUM
3696 BFD_RELOC_BFIN_16_IMM
3697 ENUMDOC
3698 ADI Blackfin 16 bit immediate absolute reloc.
3699 ENUM
3700 BFD_RELOC_BFIN_16_HIGH
3701 ENUMDOC
3702 ADI Blackfin 16 bit immediate absolute reloc higher 16 bits.
3703 ENUM
3704 BFD_RELOC_BFIN_4_PCREL
3705 ENUMDOC
3706 ADI Blackfin 'a' part of LSETUP.
3707 ENUM
3708 BFD_RELOC_BFIN_5_PCREL
3709 ENUMDOC
3710 ADI Blackfin.
3711 ENUM
3712 BFD_RELOC_BFIN_16_LOW
3713 ENUMDOC
3714 ADI Blackfin 16 bit immediate absolute reloc lower 16 bits.
3715 ENUM
3716 BFD_RELOC_BFIN_10_PCREL
3717 ENUMDOC
3718 ADI Blackfin.
3719 ENUM
3720 BFD_RELOC_BFIN_11_PCREL
3721 ENUMDOC
3722 ADI Blackfin 'b' part of LSETUP.
3723 ENUM
3724 BFD_RELOC_BFIN_12_PCREL_JUMP
3725 ENUMDOC
3726 ADI Blackfin.
3727 ENUM
3728 BFD_RELOC_BFIN_12_PCREL_JUMP_S
3729 ENUMDOC
3730 ADI Blackfin Short jump, pcrel.
3731 ENUM
3732 BFD_RELOC_BFIN_24_PCREL_CALL_X
3733 ENUMDOC
3734 ADI Blackfin Call.x not implemented.
3735 ENUM
3736 BFD_RELOC_BFIN_24_PCREL_JUMP_L
3737 ENUMDOC
3738 ADI Blackfin Long Jump pcrel.
3739 ENUM
3740 BFD_RELOC_BFIN_GOT17M4
3741 ENUMX
3742 BFD_RELOC_BFIN_GOTHI
3743 ENUMX
3744 BFD_RELOC_BFIN_GOTLO
3745 ENUMX
3746 BFD_RELOC_BFIN_FUNCDESC
3747 ENUMX
3748 BFD_RELOC_BFIN_FUNCDESC_GOT17M4
3749 ENUMX
3750 BFD_RELOC_BFIN_FUNCDESC_GOTHI
3751 ENUMX
3752 BFD_RELOC_BFIN_FUNCDESC_GOTLO
3753 ENUMX
3754 BFD_RELOC_BFIN_FUNCDESC_VALUE
3755 ENUMX
3756 BFD_RELOC_BFIN_FUNCDESC_GOTOFF17M4
3757 ENUMX
3758 BFD_RELOC_BFIN_FUNCDESC_GOTOFFHI
3759 ENUMX
3760 BFD_RELOC_BFIN_FUNCDESC_GOTOFFLO
3761 ENUMX
3762 BFD_RELOC_BFIN_GOTOFF17M4
3763 ENUMX
3764 BFD_RELOC_BFIN_GOTOFFHI
3765 ENUMX
3766 BFD_RELOC_BFIN_GOTOFFLO
3767 ENUMDOC
3768 ADI Blackfin FD-PIC relocations.
3769 ENUM
3770 BFD_RELOC_BFIN_GOT
3771 ENUMDOC
3772 ADI Blackfin GOT relocation.
3773 ENUM
3774 BFD_RELOC_BFIN_PLTPC
3775 ENUMDOC
3776 ADI Blackfin PLTPC relocation.
3777 ENUM
3778 BFD_ARELOC_BFIN_PUSH
3779 ENUMDOC
3780 ADI Blackfin arithmetic relocation.
3781 ENUM
3782 BFD_ARELOC_BFIN_CONST
3783 ENUMDOC
3784 ADI Blackfin arithmetic relocation.
3785 ENUM
3786 BFD_ARELOC_BFIN_ADD
3787 ENUMDOC
3788 ADI Blackfin arithmetic relocation.
3789 ENUM
3790 BFD_ARELOC_BFIN_SUB
3791 ENUMDOC
3792 ADI Blackfin arithmetic relocation.
3793 ENUM
3794 BFD_ARELOC_BFIN_MULT
3795 ENUMDOC
3796 ADI Blackfin arithmetic relocation.
3797 ENUM
3798 BFD_ARELOC_BFIN_DIV
3799 ENUMDOC
3800 ADI Blackfin arithmetic relocation.
3801 ENUM
3802 BFD_ARELOC_BFIN_MOD
3803 ENUMDOC
3804 ADI Blackfin arithmetic relocation.
3805 ENUM
3806 BFD_ARELOC_BFIN_LSHIFT
3807 ENUMDOC
3808 ADI Blackfin arithmetic relocation.
3809 ENUM
3810 BFD_ARELOC_BFIN_RSHIFT
3811 ENUMDOC
3812 ADI Blackfin arithmetic relocation.
3813 ENUM
3814 BFD_ARELOC_BFIN_AND
3815 ENUMDOC
3816 ADI Blackfin arithmetic relocation.
3817 ENUM
3818 BFD_ARELOC_BFIN_OR
3819 ENUMDOC
3820 ADI Blackfin arithmetic relocation.
3821 ENUM
3822 BFD_ARELOC_BFIN_XOR
3823 ENUMDOC
3824 ADI Blackfin arithmetic relocation.
3825 ENUM
3826 BFD_ARELOC_BFIN_LAND
3827 ENUMDOC
3828 ADI Blackfin arithmetic relocation.
3829 ENUM
3830 BFD_ARELOC_BFIN_LOR
3831 ENUMDOC
3832 ADI Blackfin arithmetic relocation.
3833 ENUM
3834 BFD_ARELOC_BFIN_LEN
3835 ENUMDOC
3836 ADI Blackfin arithmetic relocation.
3837 ENUM
3838 BFD_ARELOC_BFIN_NEG
3839 ENUMDOC
3840 ADI Blackfin arithmetic relocation.
3841 ENUM
3842 BFD_ARELOC_BFIN_COMP
3843 ENUMDOC
3844 ADI Blackfin arithmetic relocation.
3845 ENUM
3846 BFD_ARELOC_BFIN_PAGE
3847 ENUMDOC
3848 ADI Blackfin arithmetic relocation.
3849 ENUM
3850 BFD_ARELOC_BFIN_HWPAGE
3851 ENUMDOC
3852 ADI Blackfin arithmetic relocation.
3853 ENUM
3854 BFD_ARELOC_BFIN_ADDR
3855 ENUMDOC
3856 ADI Blackfin arithmetic relocation.
3857
3858 ENUM
3859 BFD_RELOC_D10V_10_PCREL_R
3860 ENUMDOC
3861 Mitsubishi D10V relocs.
3862 This is a 10-bit reloc with the right 2 bits
3863 assumed to be 0.
3864 ENUM
3865 BFD_RELOC_D10V_10_PCREL_L
3866 ENUMDOC
3867 Mitsubishi D10V relocs.
3868 This is a 10-bit reloc with the right 2 bits
3869 assumed to be 0. This is the same as the previous reloc
3870 except it is in the left container, i.e.,
3871 shifted left 15 bits.
3872 ENUM
3873 BFD_RELOC_D10V_18
3874 ENUMDOC
3875 This is an 18-bit reloc with the right 2 bits
3876 assumed to be 0.
3877 ENUM
3878 BFD_RELOC_D10V_18_PCREL
3879 ENUMDOC
3880 This is an 18-bit reloc with the right 2 bits
3881 assumed to be 0.
3882
3883 ENUM
3884 BFD_RELOC_D30V_6
3885 ENUMDOC
3886 Mitsubishi D30V relocs.
3887 This is a 6-bit absolute reloc.
3888 ENUM
3889 BFD_RELOC_D30V_9_PCREL
3890 ENUMDOC
3891 This is a 6-bit pc-relative reloc with
3892 the right 3 bits assumed to be 0.
3893 ENUM
3894 BFD_RELOC_D30V_9_PCREL_R
3895 ENUMDOC
3896 This is a 6-bit pc-relative reloc with
3897 the right 3 bits assumed to be 0. Same
3898 as the previous reloc but on the right side
3899 of the container.
3900 ENUM
3901 BFD_RELOC_D30V_15
3902 ENUMDOC
3903 This is a 12-bit absolute reloc with the
3904 right 3 bitsassumed to be 0.
3905 ENUM
3906 BFD_RELOC_D30V_15_PCREL
3907 ENUMDOC
3908 This is a 12-bit pc-relative reloc with
3909 the right 3 bits assumed to be 0.
3910 ENUM
3911 BFD_RELOC_D30V_15_PCREL_R
3912 ENUMDOC
3913 This is a 12-bit pc-relative reloc with
3914 the right 3 bits assumed to be 0. Same
3915 as the previous reloc but on the right side
3916 of the container.
3917 ENUM
3918 BFD_RELOC_D30V_21
3919 ENUMDOC
3920 This is an 18-bit absolute reloc with
3921 the right 3 bits assumed to be 0.
3922 ENUM
3923 BFD_RELOC_D30V_21_PCREL
3924 ENUMDOC
3925 This is an 18-bit pc-relative reloc with
3926 the right 3 bits assumed to be 0.
3927 ENUM
3928 BFD_RELOC_D30V_21_PCREL_R
3929 ENUMDOC
3930 This is an 18-bit pc-relative reloc with
3931 the right 3 bits assumed to be 0. Same
3932 as the previous reloc but on the right side
3933 of the container.
3934 ENUM
3935 BFD_RELOC_D30V_32
3936 ENUMDOC
3937 This is a 32-bit absolute reloc.
3938 ENUM
3939 BFD_RELOC_D30V_32_PCREL
3940 ENUMDOC
3941 This is a 32-bit pc-relative reloc.
3942
3943 ENUM
3944 BFD_RELOC_DLX_HI16_S
3945 ENUMDOC
3946 DLX relocs
3947 ENUM
3948 BFD_RELOC_DLX_LO16
3949 ENUMDOC
3950 DLX relocs
3951 ENUM
3952 BFD_RELOC_DLX_JMP26
3953 ENUMDOC
3954 DLX relocs
3955
3956 ENUM
3957 BFD_RELOC_M32C_HI8
3958 ENUMX
3959 BFD_RELOC_M32C_RL_JUMP
3960 ENUMX
3961 BFD_RELOC_M32C_RL_1ADDR
3962 ENUMX
3963 BFD_RELOC_M32C_RL_2ADDR
3964 ENUMDOC
3965 Renesas M16C/M32C Relocations.
3966
3967 ENUM
3968 BFD_RELOC_M32R_24
3969 ENUMDOC
3970 Renesas M32R (formerly Mitsubishi M32R) relocs.
3971 This is a 24 bit absolute address.
3972 ENUM
3973 BFD_RELOC_M32R_10_PCREL
3974 ENUMDOC
3975 This is a 10-bit pc-relative reloc with the right 2 bits assumed to be 0.
3976 ENUM
3977 BFD_RELOC_M32R_18_PCREL
3978 ENUMDOC
3979 This is an 18-bit reloc with the right 2 bits assumed to be 0.
3980 ENUM
3981 BFD_RELOC_M32R_26_PCREL
3982 ENUMDOC
3983 This is a 26-bit reloc with the right 2 bits assumed to be 0.
3984 ENUM
3985 BFD_RELOC_M32R_HI16_ULO
3986 ENUMDOC
3987 This is a 16-bit reloc containing the high 16 bits of an address
3988 used when the lower 16 bits are treated as unsigned.
3989 ENUM
3990 BFD_RELOC_M32R_HI16_SLO
3991 ENUMDOC
3992 This is a 16-bit reloc containing the high 16 bits of an address
3993 used when the lower 16 bits are treated as signed.
3994 ENUM
3995 BFD_RELOC_M32R_LO16
3996 ENUMDOC
3997 This is a 16-bit reloc containing the lower 16 bits of an address.
3998 ENUM
3999 BFD_RELOC_M32R_SDA16
4000 ENUMDOC
4001 This is a 16-bit reloc containing the small data area offset for use in
4002 add3, load, and store instructions.
4003 ENUM
4004 BFD_RELOC_M32R_GOT24
4005 ENUMX
4006 BFD_RELOC_M32R_26_PLTREL
4007 ENUMX
4008 BFD_RELOC_M32R_COPY
4009 ENUMX
4010 BFD_RELOC_M32R_GLOB_DAT
4011 ENUMX
4012 BFD_RELOC_M32R_JMP_SLOT
4013 ENUMX
4014 BFD_RELOC_M32R_RELATIVE
4015 ENUMX
4016 BFD_RELOC_M32R_GOTOFF
4017 ENUMX
4018 BFD_RELOC_M32R_GOTOFF_HI_ULO
4019 ENUMX
4020 BFD_RELOC_M32R_GOTOFF_HI_SLO
4021 ENUMX
4022 BFD_RELOC_M32R_GOTOFF_LO
4023 ENUMX
4024 BFD_RELOC_M32R_GOTPC24
4025 ENUMX
4026 BFD_RELOC_M32R_GOT16_HI_ULO
4027 ENUMX
4028 BFD_RELOC_M32R_GOT16_HI_SLO
4029 ENUMX
4030 BFD_RELOC_M32R_GOT16_LO
4031 ENUMX
4032 BFD_RELOC_M32R_GOTPC_HI_ULO
4033 ENUMX
4034 BFD_RELOC_M32R_GOTPC_HI_SLO
4035 ENUMX
4036 BFD_RELOC_M32R_GOTPC_LO
4037 ENUMDOC
4038 For PIC.
4039
4040
4041 ENUM
4042 BFD_RELOC_NDS32_20
4043 ENUMDOC
4044 NDS32 relocs.
4045 This is a 20 bit absolute address.
4046 ENUM
4047 BFD_RELOC_NDS32_9_PCREL
4048 ENUMDOC
4049 This is a 9-bit pc-relative reloc with the right 1 bit assumed to be 0.
4050 ENUM
4051 BFD_RELOC_NDS32_WORD_9_PCREL
4052 ENUMDOC
4053 This is a 9-bit pc-relative reloc with the right 1 bit assumed to be 0.
4054 ENUM
4055 BFD_RELOC_NDS32_15_PCREL
4056 ENUMDOC
4057 This is an 15-bit reloc with the right 1 bit assumed to be 0.
4058 ENUM
4059 BFD_RELOC_NDS32_17_PCREL
4060 ENUMDOC
4061 This is an 17-bit reloc with the right 1 bit assumed to be 0.
4062 ENUM
4063 BFD_RELOC_NDS32_25_PCREL
4064 ENUMDOC
4065 This is a 25-bit reloc with the right 1 bit assumed to be 0.
4066 ENUM
4067 BFD_RELOC_NDS32_HI20
4068 ENUMDOC
4069 This is a 20-bit reloc containing the high 20 bits of an address
4070 used with the lower 12 bits
4071 ENUM
4072 BFD_RELOC_NDS32_LO12S3
4073 ENUMDOC
4074 This is a 12-bit reloc containing the lower 12 bits of an address
4075 then shift right by 3. This is used with ldi,sdi...
4076 ENUM
4077 BFD_RELOC_NDS32_LO12S2
4078 ENUMDOC
4079 This is a 12-bit reloc containing the lower 12 bits of an address
4080 then shift left by 2. This is used with lwi,swi...
4081 ENUM
4082 BFD_RELOC_NDS32_LO12S1
4083 ENUMDOC
4084 This is a 12-bit reloc containing the lower 12 bits of an address
4085 then shift left by 1. This is used with lhi,shi...
4086 ENUM
4087 BFD_RELOC_NDS32_LO12S0
4088 ENUMDOC
4089 This is a 12-bit reloc containing the lower 12 bits of an address
4090 then shift left by 0. This is used with lbisbi...
4091 ENUM
4092 BFD_RELOC_NDS32_LO12S0_ORI
4093 ENUMDOC
4094 This is a 12-bit reloc containing the lower 12 bits of an address
4095 then shift left by 0. This is only used with branch relaxations
4096 ENUM
4097 BFD_RELOC_NDS32_SDA15S3
4098 ENUMDOC
4099 This is a 15-bit reloc containing the small data area 18-bit signed offset
4100 and shift left by 3 for use in ldi, sdi...
4101 ENUM
4102 BFD_RELOC_NDS32_SDA15S2
4103 ENUMDOC
4104 This is a 15-bit reloc containing the small data area 17-bit signed offset
4105 and shift left by 2 for use in lwi, swi...
4106 ENUM
4107 BFD_RELOC_NDS32_SDA15S1
4108 ENUMDOC
4109 This is a 15-bit reloc containing the small data area 16-bit signed offset
4110 and shift left by 1 for use in lhi, shi...
4111 ENUM
4112 BFD_RELOC_NDS32_SDA15S0
4113 ENUMDOC
4114 This is a 15-bit reloc containing the small data area 15-bit signed offset
4115 and shift left by 0 for use in lbi, sbi...
4116 ENUM
4117 BFD_RELOC_NDS32_SDA16S3
4118 ENUMDOC
4119 This is a 16-bit reloc containing the small data area 16-bit signed offset
4120 and shift left by 3
4121 ENUM
4122 BFD_RELOC_NDS32_SDA17S2
4123 ENUMDOC
4124 This is a 17-bit reloc containing the small data area 17-bit signed offset
4125 and shift left by 2 for use in lwi.gp, swi.gp...
4126 ENUM
4127 BFD_RELOC_NDS32_SDA18S1
4128 ENUMDOC
4129 This is a 18-bit reloc containing the small data area 18-bit signed offset
4130 and shift left by 1 for use in lhi.gp, shi.gp...
4131 ENUM
4132 BFD_RELOC_NDS32_SDA19S0
4133 ENUMDOC
4134 This is a 19-bit reloc containing the small data area 19-bit signed offset
4135 and shift left by 0 for use in lbi.gp, sbi.gp...
4136 ENUM
4137 BFD_RELOC_NDS32_GOT20
4138 ENUMX
4139 BFD_RELOC_NDS32_9_PLTREL
4140 ENUMX
4141 BFD_RELOC_NDS32_25_PLTREL
4142 ENUMX
4143 BFD_RELOC_NDS32_COPY
4144 ENUMX
4145 BFD_RELOC_NDS32_GLOB_DAT
4146 ENUMX
4147 BFD_RELOC_NDS32_JMP_SLOT
4148 ENUMX
4149 BFD_RELOC_NDS32_RELATIVE
4150 ENUMX
4151 BFD_RELOC_NDS32_GOTOFF
4152 ENUMX
4153 BFD_RELOC_NDS32_GOTOFF_HI20
4154 ENUMX
4155 BFD_RELOC_NDS32_GOTOFF_LO12
4156 ENUMX
4157 BFD_RELOC_NDS32_GOTPC20
4158 ENUMX
4159 BFD_RELOC_NDS32_GOT_HI20
4160 ENUMX
4161 BFD_RELOC_NDS32_GOT_LO12
4162 ENUMX
4163 BFD_RELOC_NDS32_GOTPC_HI20
4164 ENUMX
4165 BFD_RELOC_NDS32_GOTPC_LO12
4166 ENUMDOC
4167 for PIC
4168 ENUM
4169 BFD_RELOC_NDS32_INSN16
4170 ENUMX
4171 BFD_RELOC_NDS32_LABEL
4172 ENUMX
4173 BFD_RELOC_NDS32_LONGCALL1
4174 ENUMX
4175 BFD_RELOC_NDS32_LONGCALL2
4176 ENUMX
4177 BFD_RELOC_NDS32_LONGCALL3
4178 ENUMX
4179 BFD_RELOC_NDS32_LONGJUMP1
4180 ENUMX
4181 BFD_RELOC_NDS32_LONGJUMP2
4182 ENUMX
4183 BFD_RELOC_NDS32_LONGJUMP3
4184 ENUMX
4185 BFD_RELOC_NDS32_LOADSTORE
4186 ENUMX
4187 BFD_RELOC_NDS32_9_FIXED
4188 ENUMX
4189 BFD_RELOC_NDS32_15_FIXED
4190 ENUMX
4191 BFD_RELOC_NDS32_17_FIXED
4192 ENUMX
4193 BFD_RELOC_NDS32_25_FIXED
4194 ENUMX
4195 BFD_RELOC_NDS32_LONGCALL4
4196 ENUMX
4197 BFD_RELOC_NDS32_LONGCALL5
4198 ENUMX
4199 BFD_RELOC_NDS32_LONGCALL6
4200 ENUMX
4201 BFD_RELOC_NDS32_LONGJUMP4
4202 ENUMX
4203 BFD_RELOC_NDS32_LONGJUMP5
4204 ENUMX
4205 BFD_RELOC_NDS32_LONGJUMP6
4206 ENUMX
4207 BFD_RELOC_NDS32_LONGJUMP7
4208 ENUMDOC
4209 for relax
4210 ENUM
4211 BFD_RELOC_NDS32_PLTREL_HI20
4212 ENUMX
4213 BFD_RELOC_NDS32_PLTREL_LO12
4214 ENUMX
4215 BFD_RELOC_NDS32_PLT_GOTREL_HI20
4216 ENUMX
4217 BFD_RELOC_NDS32_PLT_GOTREL_LO12
4218 ENUMDOC
4219 for PIC
4220 ENUM
4221 BFD_RELOC_NDS32_SDA12S2_DP
4222 ENUMX
4223 BFD_RELOC_NDS32_SDA12S2_SP
4224 ENUMX
4225 BFD_RELOC_NDS32_LO12S2_DP
4226 ENUMX
4227 BFD_RELOC_NDS32_LO12S2_SP
4228 ENUMDOC
4229 for floating point
4230 ENUM
4231 BFD_RELOC_NDS32_DWARF2_OP1
4232 ENUMX
4233 BFD_RELOC_NDS32_DWARF2_OP2
4234 ENUMX
4235 BFD_RELOC_NDS32_DWARF2_LEB
4236 ENUMDOC
4237 for dwarf2 debug_line.
4238 ENUM
4239 BFD_RELOC_NDS32_UPDATE_TA
4240 ENUMDOC
4241 for eliminate 16-bit instructions
4242 ENUM
4243 BFD_RELOC_NDS32_PLT_GOTREL_LO20
4244 ENUMX
4245 BFD_RELOC_NDS32_PLT_GOTREL_LO15
4246 ENUMX
4247 BFD_RELOC_NDS32_PLT_GOTREL_LO19
4248 ENUMX
4249 BFD_RELOC_NDS32_GOT_LO15
4250 ENUMX
4251 BFD_RELOC_NDS32_GOT_LO19
4252 ENUMX
4253 BFD_RELOC_NDS32_GOTOFF_LO15
4254 ENUMX
4255 BFD_RELOC_NDS32_GOTOFF_LO19
4256 ENUMX
4257 BFD_RELOC_NDS32_GOT15S2
4258 ENUMX
4259 BFD_RELOC_NDS32_GOT17S2
4260 ENUMDOC
4261 for PIC object relaxation
4262 ENUM
4263 BFD_RELOC_NDS32_5
4264 ENUMDOC
4265 NDS32 relocs.
4266 This is a 5 bit absolute address.
4267 ENUM
4268 BFD_RELOC_NDS32_10_UPCREL
4269 ENUMDOC
4270 This is a 10-bit unsigned pc-relative reloc with the right 1 bit assumed to be 0.
4271 ENUM
4272 BFD_RELOC_NDS32_SDA_FP7U2_RELA
4273 ENUMDOC
4274 If fp were omitted, fp can used as another gp.
4275 ENUM
4276 BFD_RELOC_NDS32_RELAX_ENTRY
4277 ENUMX
4278 BFD_RELOC_NDS32_GOT_SUFF
4279 ENUMX
4280 BFD_RELOC_NDS32_GOTOFF_SUFF
4281 ENUMX
4282 BFD_RELOC_NDS32_PLT_GOT_SUFF
4283 ENUMX
4284 BFD_RELOC_NDS32_MULCALL_SUFF
4285 ENUMX
4286 BFD_RELOC_NDS32_PTR
4287 ENUMX
4288 BFD_RELOC_NDS32_PTR_COUNT
4289 ENUMX
4290 BFD_RELOC_NDS32_PTR_RESOLVED
4291 ENUMX
4292 BFD_RELOC_NDS32_PLTBLOCK
4293 ENUMX
4294 BFD_RELOC_NDS32_RELAX_REGION_BEGIN
4295 ENUMX
4296 BFD_RELOC_NDS32_RELAX_REGION_END
4297 ENUMX
4298 BFD_RELOC_NDS32_MINUEND
4299 ENUMX
4300 BFD_RELOC_NDS32_SUBTRAHEND
4301 ENUMX
4302 BFD_RELOC_NDS32_DIFF8
4303 ENUMX
4304 BFD_RELOC_NDS32_DIFF16
4305 ENUMX
4306 BFD_RELOC_NDS32_DIFF32
4307 ENUMX
4308 BFD_RELOC_NDS32_DIFF_ULEB128
4309 ENUMX
4310 BFD_RELOC_NDS32_EMPTY
4311 ENUMDOC
4312 relaxation relative relocation types
4313 ENUM
4314 BFD_RELOC_NDS32_25_ABS
4315 ENUMDOC
4316 This is a 25 bit absolute address.
4317 ENUM
4318 BFD_RELOC_NDS32_DATA
4319 ENUMX
4320 BFD_RELOC_NDS32_TRAN
4321 ENUMX
4322 BFD_RELOC_NDS32_17IFC_PCREL
4323 ENUMX
4324 BFD_RELOC_NDS32_10IFCU_PCREL
4325 ENUMDOC
4326 For ex9 and ifc using.
4327 ENUM
4328 BFD_RELOC_NDS32_TPOFF
4329 ENUMX
4330 BFD_RELOC_NDS32_GOTTPOFF
4331 ENUMX
4332 BFD_RELOC_NDS32_TLS_LE_HI20
4333 ENUMX
4334 BFD_RELOC_NDS32_TLS_LE_LO12
4335 ENUMX
4336 BFD_RELOC_NDS32_TLS_LE_20
4337 ENUMX
4338 BFD_RELOC_NDS32_TLS_LE_15S0
4339 ENUMX
4340 BFD_RELOC_NDS32_TLS_LE_15S1
4341 ENUMX
4342 BFD_RELOC_NDS32_TLS_LE_15S2
4343 ENUMX
4344 BFD_RELOC_NDS32_TLS_LE_ADD
4345 ENUMX
4346 BFD_RELOC_NDS32_TLS_LE_LS
4347 ENUMX
4348 BFD_RELOC_NDS32_TLS_IE_HI20
4349 ENUMX
4350 BFD_RELOC_NDS32_TLS_IE_LO12
4351 ENUMX
4352 BFD_RELOC_NDS32_TLS_IE_LO12S2
4353 ENUMX
4354 BFD_RELOC_NDS32_TLS_IEGP_HI20
4355 ENUMX
4356 BFD_RELOC_NDS32_TLS_IEGP_LO12
4357 ENUMX
4358 BFD_RELOC_NDS32_TLS_IEGP_LO12S2
4359 ENUMX
4360 BFD_RELOC_NDS32_TLS_IEGP_LW
4361 ENUMX
4362 BFD_RELOC_NDS32_TLS_DESC
4363 ENUMX
4364 BFD_RELOC_NDS32_TLS_DESC_HI20
4365 ENUMX
4366 BFD_RELOC_NDS32_TLS_DESC_LO12
4367 ENUMX
4368 BFD_RELOC_NDS32_TLS_DESC_20
4369 ENUMX
4370 BFD_RELOC_NDS32_TLS_DESC_SDA17S2
4371 ENUMX
4372 BFD_RELOC_NDS32_TLS_DESC_ADD
4373 ENUMX
4374 BFD_RELOC_NDS32_TLS_DESC_FUNC
4375 ENUMX
4376 BFD_RELOC_NDS32_TLS_DESC_CALL
4377 ENUMX
4378 BFD_RELOC_NDS32_TLS_DESC_MEM
4379 ENUMX
4380 BFD_RELOC_NDS32_REMOVE
4381 ENUMX
4382 BFD_RELOC_NDS32_GROUP
4383 ENUMDOC
4384 For TLS.
4385 ENUM
4386 BFD_RELOC_NDS32_LSI
4387 ENUMDOC
4388 For floating load store relaxation.
4389
4390
4391 ENUM
4392 BFD_RELOC_V850_9_PCREL
4393 ENUMDOC
4394 This is a 9-bit reloc
4395 ENUM
4396 BFD_RELOC_V850_22_PCREL
4397 ENUMDOC
4398 This is a 22-bit reloc
4399
4400 ENUM
4401 BFD_RELOC_V850_SDA_16_16_OFFSET
4402 ENUMDOC
4403 This is a 16 bit offset from the short data area pointer.
4404 ENUM
4405 BFD_RELOC_V850_SDA_15_16_OFFSET
4406 ENUMDOC
4407 This is a 16 bit offset (of which only 15 bits are used) from the
4408 short data area pointer.
4409 ENUM
4410 BFD_RELOC_V850_ZDA_16_16_OFFSET
4411 ENUMDOC
4412 This is a 16 bit offset from the zero data area pointer.
4413 ENUM
4414 BFD_RELOC_V850_ZDA_15_16_OFFSET
4415 ENUMDOC
4416 This is a 16 bit offset (of which only 15 bits are used) from the
4417 zero data area pointer.
4418 ENUM
4419 BFD_RELOC_V850_TDA_6_8_OFFSET
4420 ENUMDOC
4421 This is an 8 bit offset (of which only 6 bits are used) from the
4422 tiny data area pointer.
4423 ENUM
4424 BFD_RELOC_V850_TDA_7_8_OFFSET
4425 ENUMDOC
4426 This is an 8bit offset (of which only 7 bits are used) from the tiny
4427 data area pointer.
4428 ENUM
4429 BFD_RELOC_V850_TDA_7_7_OFFSET
4430 ENUMDOC
4431 This is a 7 bit offset from the tiny data area pointer.
4432 ENUM
4433 BFD_RELOC_V850_TDA_16_16_OFFSET
4434 ENUMDOC
4435 This is a 16 bit offset from the tiny data area pointer.
4436 COMMENT
4437 ENUM
4438 BFD_RELOC_V850_TDA_4_5_OFFSET
4439 ENUMDOC
4440 This is a 5 bit offset (of which only 4 bits are used) from the tiny
4441 data area pointer.
4442 ENUM
4443 BFD_RELOC_V850_TDA_4_4_OFFSET
4444 ENUMDOC
4445 This is a 4 bit offset from the tiny data area pointer.
4446 ENUM
4447 BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET
4448 ENUMDOC
4449 This is a 16 bit offset from the short data area pointer, with the
4450 bits placed non-contiguously in the instruction.
4451 ENUM
4452 BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET
4453 ENUMDOC
4454 This is a 16 bit offset from the zero data area pointer, with the
4455 bits placed non-contiguously in the instruction.
4456 ENUM
4457 BFD_RELOC_V850_CALLT_6_7_OFFSET
4458 ENUMDOC
4459 This is a 6 bit offset from the call table base pointer.
4460 ENUM
4461 BFD_RELOC_V850_CALLT_16_16_OFFSET
4462 ENUMDOC
4463 This is a 16 bit offset from the call table base pointer.
4464 ENUM
4465 BFD_RELOC_V850_LONGCALL
4466 ENUMDOC
4467 Used for relaxing indirect function calls.
4468 ENUM
4469 BFD_RELOC_V850_LONGJUMP
4470 ENUMDOC
4471 Used for relaxing indirect jumps.
4472 ENUM
4473 BFD_RELOC_V850_ALIGN
4474 ENUMDOC
4475 Used to maintain alignment whilst relaxing.
4476 ENUM
4477 BFD_RELOC_V850_LO16_SPLIT_OFFSET
4478 ENUMDOC
4479 This is a variation of BFD_RELOC_LO16 that can be used in v850e ld.bu
4480 instructions.
4481 ENUM
4482 BFD_RELOC_V850_16_PCREL
4483 ENUMDOC
4484 This is a 16-bit reloc.
4485 ENUM
4486 BFD_RELOC_V850_17_PCREL
4487 ENUMDOC
4488 This is a 17-bit reloc.
4489 ENUM
4490 BFD_RELOC_V850_23
4491 ENUMDOC
4492 This is a 23-bit reloc.
4493 ENUM
4494 BFD_RELOC_V850_32_PCREL
4495 ENUMDOC
4496 This is a 32-bit reloc.
4497 ENUM
4498 BFD_RELOC_V850_32_ABS
4499 ENUMDOC
4500 This is a 32-bit reloc.
4501 ENUM
4502 BFD_RELOC_V850_16_SPLIT_OFFSET
4503 ENUMDOC
4504 This is a 16-bit reloc.
4505 ENUM
4506 BFD_RELOC_V850_16_S1
4507 ENUMDOC
4508 This is a 16-bit reloc.
4509 ENUM
4510 BFD_RELOC_V850_LO16_S1
4511 ENUMDOC
4512 Low 16 bits. 16 bit shifted by 1.
4513 ENUM
4514 BFD_RELOC_V850_CALLT_15_16_OFFSET
4515 ENUMDOC
4516 This is a 16 bit offset from the call table base pointer.
4517 ENUM
4518 BFD_RELOC_V850_32_GOTPCREL
4519 ENUMDOC
4520 DSO relocations.
4521 ENUM
4522 BFD_RELOC_V850_16_GOT
4523 ENUMDOC
4524 DSO relocations.
4525 ENUM
4526 BFD_RELOC_V850_32_GOT
4527 ENUMDOC
4528 DSO relocations.
4529 ENUM
4530 BFD_RELOC_V850_22_PLT_PCREL
4531 ENUMDOC
4532 DSO relocations.
4533 ENUM
4534 BFD_RELOC_V850_32_PLT_PCREL
4535 ENUMDOC
4536 DSO relocations.
4537 ENUM
4538 BFD_RELOC_V850_COPY
4539 ENUMDOC
4540 DSO relocations.
4541 ENUM
4542 BFD_RELOC_V850_GLOB_DAT
4543 ENUMDOC
4544 DSO relocations.
4545 ENUM
4546 BFD_RELOC_V850_JMP_SLOT
4547 ENUMDOC
4548 DSO relocations.
4549 ENUM
4550 BFD_RELOC_V850_RELATIVE
4551 ENUMDOC
4552 DSO relocations.
4553 ENUM
4554 BFD_RELOC_V850_16_GOTOFF
4555 ENUMDOC
4556 DSO relocations.
4557 ENUM
4558 BFD_RELOC_V850_32_GOTOFF
4559 ENUMDOC
4560 DSO relocations.
4561 ENUM
4562 BFD_RELOC_V850_CODE
4563 ENUMDOC
4564 start code.
4565 ENUM
4566 BFD_RELOC_V850_DATA
4567 ENUMDOC
4568 start data in text.
4569
4570 ENUM
4571 BFD_RELOC_TIC30_LDP
4572 ENUMDOC
4573 This is a 8bit DP reloc for the tms320c30, where the most
4574 significant 8 bits of a 24 bit word are placed into the least
4575 significant 8 bits of the opcode.
4576
4577 ENUM
4578 BFD_RELOC_TIC54X_PARTLS7
4579 ENUMDOC
4580 This is a 7bit reloc for the tms320c54x, where the least
4581 significant 7 bits of a 16 bit word are placed into the least
4582 significant 7 bits of the opcode.
4583
4584 ENUM
4585 BFD_RELOC_TIC54X_PARTMS9
4586 ENUMDOC
4587 This is a 9bit DP reloc for the tms320c54x, where the most
4588 significant 9 bits of a 16 bit word are placed into the least
4589 significant 9 bits of the opcode.
4590
4591 ENUM
4592 BFD_RELOC_TIC54X_23
4593 ENUMDOC
4594 This is an extended address 23-bit reloc for the tms320c54x.
4595
4596 ENUM
4597 BFD_RELOC_TIC54X_16_OF_23
4598 ENUMDOC
4599 This is a 16-bit reloc for the tms320c54x, where the least
4600 significant 16 bits of a 23-bit extended address are placed into
4601 the opcode.
4602
4603 ENUM
4604 BFD_RELOC_TIC54X_MS7_OF_23
4605 ENUMDOC
4606 This is a reloc for the tms320c54x, where the most
4607 significant 7 bits of a 23-bit extended address are placed into
4608 the opcode.
4609
4610 ENUM
4611 BFD_RELOC_C6000_PCR_S21
4612 ENUMX
4613 BFD_RELOC_C6000_PCR_S12
4614 ENUMX
4615 BFD_RELOC_C6000_PCR_S10
4616 ENUMX
4617 BFD_RELOC_C6000_PCR_S7
4618 ENUMX
4619 BFD_RELOC_C6000_ABS_S16
4620 ENUMX
4621 BFD_RELOC_C6000_ABS_L16
4622 ENUMX
4623 BFD_RELOC_C6000_ABS_H16
4624 ENUMX
4625 BFD_RELOC_C6000_SBR_U15_B
4626 ENUMX
4627 BFD_RELOC_C6000_SBR_U15_H
4628 ENUMX
4629 BFD_RELOC_C6000_SBR_U15_W
4630 ENUMX
4631 BFD_RELOC_C6000_SBR_S16
4632 ENUMX
4633 BFD_RELOC_C6000_SBR_L16_B
4634 ENUMX
4635 BFD_RELOC_C6000_SBR_L16_H
4636 ENUMX
4637 BFD_RELOC_C6000_SBR_L16_W
4638 ENUMX
4639 BFD_RELOC_C6000_SBR_H16_B
4640 ENUMX
4641 BFD_RELOC_C6000_SBR_H16_H
4642 ENUMX
4643 BFD_RELOC_C6000_SBR_H16_W
4644 ENUMX
4645 BFD_RELOC_C6000_SBR_GOT_U15_W
4646 ENUMX
4647 BFD_RELOC_C6000_SBR_GOT_L16_W
4648 ENUMX
4649 BFD_RELOC_C6000_SBR_GOT_H16_W
4650 ENUMX
4651 BFD_RELOC_C6000_DSBT_INDEX
4652 ENUMX
4653 BFD_RELOC_C6000_PREL31
4654 ENUMX
4655 BFD_RELOC_C6000_COPY
4656 ENUMX
4657 BFD_RELOC_C6000_JUMP_SLOT
4658 ENUMX
4659 BFD_RELOC_C6000_EHTYPE
4660 ENUMX
4661 BFD_RELOC_C6000_PCR_H16
4662 ENUMX
4663 BFD_RELOC_C6000_PCR_L16
4664 ENUMX
4665 BFD_RELOC_C6000_ALIGN
4666 ENUMX
4667 BFD_RELOC_C6000_FPHEAD
4668 ENUMX
4669 BFD_RELOC_C6000_NOCMP
4670 ENUMDOC
4671 TMS320C6000 relocations.
4672
4673 ENUM
4674 BFD_RELOC_FR30_48
4675 ENUMDOC
4676 This is a 48 bit reloc for the FR30 that stores 32 bits.
4677 ENUM
4678 BFD_RELOC_FR30_20
4679 ENUMDOC
4680 This is a 32 bit reloc for the FR30 that stores 20 bits split up into
4681 two sections.
4682 ENUM
4683 BFD_RELOC_FR30_6_IN_4
4684 ENUMDOC
4685 This is a 16 bit reloc for the FR30 that stores a 6 bit word offset in
4686 4 bits.
4687 ENUM
4688 BFD_RELOC_FR30_8_IN_8
4689 ENUMDOC
4690 This is a 16 bit reloc for the FR30 that stores an 8 bit byte offset
4691 into 8 bits.
4692 ENUM
4693 BFD_RELOC_FR30_9_IN_8
4694 ENUMDOC
4695 This is a 16 bit reloc for the FR30 that stores a 9 bit short offset
4696 into 8 bits.
4697 ENUM
4698 BFD_RELOC_FR30_10_IN_8
4699 ENUMDOC
4700 This is a 16 bit reloc for the FR30 that stores a 10 bit word offset
4701 into 8 bits.
4702 ENUM
4703 BFD_RELOC_FR30_9_PCREL
4704 ENUMDOC
4705 This is a 16 bit reloc for the FR30 that stores a 9 bit pc relative
4706 short offset into 8 bits.
4707 ENUM
4708 BFD_RELOC_FR30_12_PCREL
4709 ENUMDOC
4710 This is a 16 bit reloc for the FR30 that stores a 12 bit pc relative
4711 short offset into 11 bits.
4712
4713 ENUM
4714 BFD_RELOC_MCORE_PCREL_IMM8BY4
4715 ENUMX
4716 BFD_RELOC_MCORE_PCREL_IMM11BY2
4717 ENUMX
4718 BFD_RELOC_MCORE_PCREL_IMM4BY2
4719 ENUMX
4720 BFD_RELOC_MCORE_PCREL_32
4721 ENUMX
4722 BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2
4723 ENUMX
4724 BFD_RELOC_MCORE_RVA
4725 ENUMDOC
4726 Motorola Mcore relocations.
4727
4728 ENUM
4729 BFD_RELOC_MEP_8
4730 ENUMX
4731 BFD_RELOC_MEP_16
4732 ENUMX
4733 BFD_RELOC_MEP_32
4734 ENUMX
4735 BFD_RELOC_MEP_PCREL8A2
4736 ENUMX
4737 BFD_RELOC_MEP_PCREL12A2
4738 ENUMX
4739 BFD_RELOC_MEP_PCREL17A2
4740 ENUMX
4741 BFD_RELOC_MEP_PCREL24A2
4742 ENUMX
4743 BFD_RELOC_MEP_PCABS24A2
4744 ENUMX
4745 BFD_RELOC_MEP_LOW16
4746 ENUMX
4747 BFD_RELOC_MEP_HI16U
4748 ENUMX
4749 BFD_RELOC_MEP_HI16S
4750 ENUMX
4751 BFD_RELOC_MEP_GPREL
4752 ENUMX
4753 BFD_RELOC_MEP_TPREL
4754 ENUMX
4755 BFD_RELOC_MEP_TPREL7
4756 ENUMX
4757 BFD_RELOC_MEP_TPREL7A2
4758 ENUMX
4759 BFD_RELOC_MEP_TPREL7A4
4760 ENUMX
4761 BFD_RELOC_MEP_UIMM24
4762 ENUMX
4763 BFD_RELOC_MEP_ADDR24A4
4764 ENUMX
4765 BFD_RELOC_MEP_GNU_VTINHERIT
4766 ENUMX
4767 BFD_RELOC_MEP_GNU_VTENTRY
4768 ENUMDOC
4769 Toshiba Media Processor Relocations.
4770 COMMENT
4771
4772 ENUM
4773 BFD_RELOC_METAG_HIADDR16
4774 ENUMX
4775 BFD_RELOC_METAG_LOADDR16
4776 ENUMX
4777 BFD_RELOC_METAG_RELBRANCH
4778 ENUMX
4779 BFD_RELOC_METAG_GETSETOFF
4780 ENUMX
4781 BFD_RELOC_METAG_HIOG
4782 ENUMX
4783 BFD_RELOC_METAG_LOOG
4784 ENUMX
4785 BFD_RELOC_METAG_REL8
4786 ENUMX
4787 BFD_RELOC_METAG_REL16
4788 ENUMX
4789 BFD_RELOC_METAG_HI16_GOTOFF
4790 ENUMX
4791 BFD_RELOC_METAG_LO16_GOTOFF
4792 ENUMX
4793 BFD_RELOC_METAG_GETSET_GOTOFF
4794 ENUMX
4795 BFD_RELOC_METAG_GETSET_GOT
4796 ENUMX
4797 BFD_RELOC_METAG_HI16_GOTPC
4798 ENUMX
4799 BFD_RELOC_METAG_LO16_GOTPC
4800 ENUMX
4801 BFD_RELOC_METAG_HI16_PLT
4802 ENUMX
4803 BFD_RELOC_METAG_LO16_PLT
4804 ENUMX
4805 BFD_RELOC_METAG_RELBRANCH_PLT
4806 ENUMX
4807 BFD_RELOC_METAG_GOTOFF
4808 ENUMX
4809 BFD_RELOC_METAG_PLT
4810 ENUMX
4811 BFD_RELOC_METAG_COPY
4812 ENUMX
4813 BFD_RELOC_METAG_JMP_SLOT
4814 ENUMX
4815 BFD_RELOC_METAG_RELATIVE
4816 ENUMX
4817 BFD_RELOC_METAG_GLOB_DAT
4818 ENUMX
4819 BFD_RELOC_METAG_TLS_GD
4820 ENUMX
4821 BFD_RELOC_METAG_TLS_LDM
4822 ENUMX
4823 BFD_RELOC_METAG_TLS_LDO_HI16
4824 ENUMX
4825 BFD_RELOC_METAG_TLS_LDO_LO16
4826 ENUMX
4827 BFD_RELOC_METAG_TLS_LDO
4828 ENUMX
4829 BFD_RELOC_METAG_TLS_IE
4830 ENUMX
4831 BFD_RELOC_METAG_TLS_IENONPIC
4832 ENUMX
4833 BFD_RELOC_METAG_TLS_IENONPIC_HI16
4834 ENUMX
4835 BFD_RELOC_METAG_TLS_IENONPIC_LO16
4836 ENUMX
4837 BFD_RELOC_METAG_TLS_TPOFF
4838 ENUMX
4839 BFD_RELOC_METAG_TLS_DTPMOD
4840 ENUMX
4841 BFD_RELOC_METAG_TLS_DTPOFF
4842 ENUMX
4843 BFD_RELOC_METAG_TLS_LE
4844 ENUMX
4845 BFD_RELOC_METAG_TLS_LE_HI16
4846 ENUMX
4847 BFD_RELOC_METAG_TLS_LE_LO16
4848 ENUMDOC
4849 Imagination Technologies Meta relocations.
4850
4851 ENUM
4852 BFD_RELOC_MMIX_GETA
4853 ENUMX
4854 BFD_RELOC_MMIX_GETA_1
4855 ENUMX
4856 BFD_RELOC_MMIX_GETA_2
4857 ENUMX
4858 BFD_RELOC_MMIX_GETA_3
4859 ENUMDOC
4860 These are relocations for the GETA instruction.
4861 ENUM
4862 BFD_RELOC_MMIX_CBRANCH
4863 ENUMX
4864 BFD_RELOC_MMIX_CBRANCH_J
4865 ENUMX
4866 BFD_RELOC_MMIX_CBRANCH_1
4867 ENUMX
4868 BFD_RELOC_MMIX_CBRANCH_2
4869 ENUMX
4870 BFD_RELOC_MMIX_CBRANCH_3
4871 ENUMDOC
4872 These are relocations for a conditional branch instruction.
4873 ENUM
4874 BFD_RELOC_MMIX_PUSHJ
4875 ENUMX
4876 BFD_RELOC_MMIX_PUSHJ_1
4877 ENUMX
4878 BFD_RELOC_MMIX_PUSHJ_2
4879 ENUMX
4880 BFD_RELOC_MMIX_PUSHJ_3
4881 ENUMX
4882 BFD_RELOC_MMIX_PUSHJ_STUBBABLE
4883 ENUMDOC
4884 These are relocations for the PUSHJ instruction.
4885 ENUM
4886 BFD_RELOC_MMIX_JMP
4887 ENUMX
4888 BFD_RELOC_MMIX_JMP_1
4889 ENUMX
4890 BFD_RELOC_MMIX_JMP_2
4891 ENUMX
4892 BFD_RELOC_MMIX_JMP_3
4893 ENUMDOC
4894 These are relocations for the JMP instruction.
4895 ENUM
4896 BFD_RELOC_MMIX_ADDR19
4897 ENUMDOC
4898 This is a relocation for a relative address as in a GETA instruction or
4899 a branch.
4900 ENUM
4901 BFD_RELOC_MMIX_ADDR27
4902 ENUMDOC
4903 This is a relocation for a relative address as in a JMP instruction.
4904 ENUM
4905 BFD_RELOC_MMIX_REG_OR_BYTE
4906 ENUMDOC
4907 This is a relocation for an instruction field that may be a general
4908 register or a value 0..255.
4909 ENUM
4910 BFD_RELOC_MMIX_REG
4911 ENUMDOC
4912 This is a relocation for an instruction field that may be a general
4913 register.
4914 ENUM
4915 BFD_RELOC_MMIX_BASE_PLUS_OFFSET
4916 ENUMDOC
4917 This is a relocation for two instruction fields holding a register and
4918 an offset, the equivalent of the relocation.
4919 ENUM
4920 BFD_RELOC_MMIX_LOCAL
4921 ENUMDOC
4922 This relocation is an assertion that the expression is not allocated as
4923 a global register. It does not modify contents.
4924
4925 ENUM
4926 BFD_RELOC_AVR_7_PCREL
4927 ENUMDOC
4928 This is a 16 bit reloc for the AVR that stores 8 bit pc relative
4929 short offset into 7 bits.
4930 ENUM
4931 BFD_RELOC_AVR_13_PCREL
4932 ENUMDOC
4933 This is a 16 bit reloc for the AVR that stores 13 bit pc relative
4934 short offset into 12 bits.
4935 ENUM
4936 BFD_RELOC_AVR_16_PM
4937 ENUMDOC
4938 This is a 16 bit reloc for the AVR that stores 17 bit value (usually
4939 program memory address) into 16 bits.
4940 ENUM
4941 BFD_RELOC_AVR_LO8_LDI
4942 ENUMDOC
4943 This is a 16 bit reloc for the AVR that stores 8 bit value (usually
4944 data memory address) into 8 bit immediate value of LDI insn.
4945 ENUM
4946 BFD_RELOC_AVR_HI8_LDI
4947 ENUMDOC
4948 This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4949 of data memory address) into 8 bit immediate value of LDI insn.
4950 ENUM
4951 BFD_RELOC_AVR_HH8_LDI
4952 ENUMDOC
4953 This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4954 of program memory address) into 8 bit immediate value of LDI insn.
4955 ENUM
4956 BFD_RELOC_AVR_MS8_LDI
4957 ENUMDOC
4958 This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4959 of 32 bit value) into 8 bit immediate value of LDI insn.
4960 ENUM
4961 BFD_RELOC_AVR_LO8_LDI_NEG
4962 ENUMDOC
4963 This is a 16 bit reloc for the AVR that stores negated 8 bit value
4964 (usually data memory address) into 8 bit immediate value of SUBI insn.
4965 ENUM
4966 BFD_RELOC_AVR_HI8_LDI_NEG
4967 ENUMDOC
4968 This is a 16 bit reloc for the AVR that stores negated 8 bit value
4969 (high 8 bit of data memory address) into 8 bit immediate value of
4970 SUBI insn.
4971 ENUM
4972 BFD_RELOC_AVR_HH8_LDI_NEG
4973 ENUMDOC
4974 This is a 16 bit reloc for the AVR that stores negated 8 bit value
4975 (most high 8 bit of program memory address) into 8 bit immediate value
4976 of LDI or SUBI insn.
4977 ENUM
4978 BFD_RELOC_AVR_MS8_LDI_NEG
4979 ENUMDOC
4980 This is a 16 bit reloc for the AVR that stores negated 8 bit value (msb
4981 of 32 bit value) into 8 bit immediate value of LDI insn.
4982 ENUM
4983 BFD_RELOC_AVR_LO8_LDI_PM
4984 ENUMDOC
4985 This is a 16 bit reloc for the AVR that stores 8 bit value (usually
4986 command address) into 8 bit immediate value of LDI insn.
4987 ENUM
4988 BFD_RELOC_AVR_LO8_LDI_GS
4989 ENUMDOC
4990 This is a 16 bit reloc for the AVR that stores 8 bit value
4991 (command address) into 8 bit immediate value of LDI insn. If the address
4992 is beyond the 128k boundary, the linker inserts a jump stub for this reloc
4993 in the lower 128k.
4994 ENUM
4995 BFD_RELOC_AVR_HI8_LDI_PM
4996 ENUMDOC
4997 This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4998 of command address) into 8 bit immediate value of LDI insn.
4999 ENUM
5000 BFD_RELOC_AVR_HI8_LDI_GS
5001 ENUMDOC
5002 This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
5003 of command address) into 8 bit immediate value of LDI insn. If the address
5004 is beyond the 128k boundary, the linker inserts a jump stub for this reloc
5005 below 128k.
5006 ENUM
5007 BFD_RELOC_AVR_HH8_LDI_PM
5008 ENUMDOC
5009 This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
5010 of command address) into 8 bit immediate value of LDI insn.
5011 ENUM
5012 BFD_RELOC_AVR_LO8_LDI_PM_NEG
5013 ENUMDOC
5014 This is a 16 bit reloc for the AVR that stores negated 8 bit value
5015 (usually command address) into 8 bit immediate value of SUBI insn.
5016 ENUM
5017 BFD_RELOC_AVR_HI8_LDI_PM_NEG
5018 ENUMDOC
5019 This is a 16 bit reloc for the AVR that stores negated 8 bit value
5020 (high 8 bit of 16 bit command address) into 8 bit immediate value
5021 of SUBI insn.
5022 ENUM
5023 BFD_RELOC_AVR_HH8_LDI_PM_NEG
5024 ENUMDOC
5025 This is a 16 bit reloc for the AVR that stores negated 8 bit value
5026 (high 6 bit of 22 bit command address) into 8 bit immediate
5027 value of SUBI insn.
5028 ENUM
5029 BFD_RELOC_AVR_CALL
5030 ENUMDOC
5031 This is a 32 bit reloc for the AVR that stores 23 bit value
5032 into 22 bits.
5033 ENUM
5034 BFD_RELOC_AVR_LDI
5035 ENUMDOC
5036 This is a 16 bit reloc for the AVR that stores all needed bits
5037 for absolute addressing with ldi with overflow check to linktime
5038 ENUM
5039 BFD_RELOC_AVR_6
5040 ENUMDOC
5041 This is a 6 bit reloc for the AVR that stores offset for ldd/std
5042 instructions
5043 ENUM
5044 BFD_RELOC_AVR_6_ADIW
5045 ENUMDOC
5046 This is a 6 bit reloc for the AVR that stores offset for adiw/sbiw
5047 instructions
5048 ENUM
5049 BFD_RELOC_AVR_8_LO
5050 ENUMDOC
5051 This is a 8 bit reloc for the AVR that stores bits 0..7 of a symbol
5052 in .byte lo8(symbol)
5053 ENUM
5054 BFD_RELOC_AVR_8_HI
5055 ENUMDOC
5056 This is a 8 bit reloc for the AVR that stores bits 8..15 of a symbol
5057 in .byte hi8(symbol)
5058 ENUM
5059 BFD_RELOC_AVR_8_HLO
5060 ENUMDOC
5061 This is a 8 bit reloc for the AVR that stores bits 16..23 of a symbol
5062 in .byte hlo8(symbol)
5063 ENUM
5064 BFD_RELOC_AVR_DIFF8
5065 ENUMX
5066 BFD_RELOC_AVR_DIFF16
5067 ENUMX
5068 BFD_RELOC_AVR_DIFF32
5069 ENUMDOC
5070 AVR relocations to mark the difference of two local symbols.
5071 These are only needed to support linker relaxation and can be ignored
5072 when not relaxing. The field is set to the value of the difference
5073 assuming no relaxation. The relocation encodes the position of the
5074 second symbol so the linker can determine whether to adjust the field
5075 value.
5076 ENUM
5077 BFD_RELOC_AVR_LDS_STS_16
5078 ENUMDOC
5079 This is a 7 bit reloc for the AVR that stores SRAM address for 16bit
5080 lds and sts instructions supported only tiny core.
5081 ENUM
5082 BFD_RELOC_AVR_PORT6
5083 ENUMDOC
5084 This is a 6 bit reloc for the AVR that stores an I/O register
5085 number for the IN and OUT instructions
5086 ENUM
5087 BFD_RELOC_AVR_PORT5
5088 ENUMDOC
5089 This is a 5 bit reloc for the AVR that stores an I/O register
5090 number for the SBIC, SBIS, SBI and CBI instructions
5091
5092 ENUM
5093 BFD_RELOC_RISCV_HI20
5094 ENUMX
5095 BFD_RELOC_RISCV_PCREL_HI20
5096 ENUMX
5097 BFD_RELOC_RISCV_PCREL_LO12_I
5098 ENUMX
5099 BFD_RELOC_RISCV_PCREL_LO12_S
5100 ENUMX
5101 BFD_RELOC_RISCV_LO12_I
5102 ENUMX
5103 BFD_RELOC_RISCV_LO12_S
5104 ENUMX
5105 BFD_RELOC_RISCV_GPREL12_I
5106 ENUMX
5107 BFD_RELOC_RISCV_GPREL12_S
5108 ENUMX
5109 BFD_RELOC_RISCV_TPREL_HI20
5110 ENUMX
5111 BFD_RELOC_RISCV_TPREL_LO12_I
5112 ENUMX
5113 BFD_RELOC_RISCV_TPREL_LO12_S
5114 ENUMX
5115 BFD_RELOC_RISCV_TPREL_ADD
5116 ENUMX
5117 BFD_RELOC_RISCV_CALL
5118 ENUMX
5119 BFD_RELOC_RISCV_CALL_PLT
5120 ENUMX
5121 BFD_RELOC_RISCV_ADD8
5122 ENUMX
5123 BFD_RELOC_RISCV_ADD16
5124 ENUMX
5125 BFD_RELOC_RISCV_ADD32
5126 ENUMX
5127 BFD_RELOC_RISCV_ADD64
5128 ENUMX
5129 BFD_RELOC_RISCV_SUB8
5130 ENUMX
5131 BFD_RELOC_RISCV_SUB16
5132 ENUMX
5133 BFD_RELOC_RISCV_SUB32
5134 ENUMX
5135 BFD_RELOC_RISCV_SUB64
5136 ENUMX
5137 BFD_RELOC_RISCV_GOT_HI20
5138 ENUMX
5139 BFD_RELOC_RISCV_TLS_GOT_HI20
5140 ENUMX
5141 BFD_RELOC_RISCV_TLS_GD_HI20
5142 ENUMX
5143 BFD_RELOC_RISCV_JMP
5144 ENUMX
5145 BFD_RELOC_RISCV_TLS_DTPMOD32
5146 ENUMX
5147 BFD_RELOC_RISCV_TLS_DTPREL32
5148 ENUMX
5149 BFD_RELOC_RISCV_TLS_DTPMOD64
5150 ENUMX
5151 BFD_RELOC_RISCV_TLS_DTPREL64
5152 ENUMX
5153 BFD_RELOC_RISCV_TLS_TPREL32
5154 ENUMX
5155 BFD_RELOC_RISCV_TLS_TPREL64
5156 ENUMX
5157 BFD_RELOC_RISCV_ALIGN
5158 ENUMX
5159 BFD_RELOC_RISCV_RVC_BRANCH
5160 ENUMX
5161 BFD_RELOC_RISCV_RVC_JUMP
5162 ENUMX
5163 BFD_RELOC_RISCV_RVC_LUI
5164 ENUMX
5165 BFD_RELOC_RISCV_GPREL_I
5166 ENUMX
5167 BFD_RELOC_RISCV_GPREL_S
5168 ENUMX
5169 BFD_RELOC_RISCV_TPREL_I
5170 ENUMX
5171 BFD_RELOC_RISCV_TPREL_S
5172 ENUMX
5173 BFD_RELOC_RISCV_RELAX
5174 ENUMX
5175 BFD_RELOC_RISCV_CFA
5176 ENUMX
5177 BFD_RELOC_RISCV_SUB6
5178 ENUMX
5179 BFD_RELOC_RISCV_SET6
5180 ENUMX
5181 BFD_RELOC_RISCV_SET8
5182 ENUMX
5183 BFD_RELOC_RISCV_SET16
5184 ENUMX
5185 BFD_RELOC_RISCV_SET32
5186 ENUMX
5187 BFD_RELOC_RISCV_32_PCREL
5188 ENUMDOC
5189 RISC-V relocations.
5190
5191 ENUM
5192 BFD_RELOC_RL78_NEG8
5193 ENUMX
5194 BFD_RELOC_RL78_NEG16
5195 ENUMX
5196 BFD_RELOC_RL78_NEG24
5197 ENUMX
5198 BFD_RELOC_RL78_NEG32
5199 ENUMX
5200 BFD_RELOC_RL78_16_OP
5201 ENUMX
5202 BFD_RELOC_RL78_24_OP
5203 ENUMX
5204 BFD_RELOC_RL78_32_OP
5205 ENUMX
5206 BFD_RELOC_RL78_8U
5207 ENUMX
5208 BFD_RELOC_RL78_16U
5209 ENUMX
5210 BFD_RELOC_RL78_24U
5211 ENUMX
5212 BFD_RELOC_RL78_DIR3U_PCREL
5213 ENUMX
5214 BFD_RELOC_RL78_DIFF
5215 ENUMX
5216 BFD_RELOC_RL78_GPRELB
5217 ENUMX
5218 BFD_RELOC_RL78_GPRELW
5219 ENUMX
5220 BFD_RELOC_RL78_GPRELL
5221 ENUMX
5222 BFD_RELOC_RL78_SYM
5223 ENUMX
5224 BFD_RELOC_RL78_OP_SUBTRACT
5225 ENUMX
5226 BFD_RELOC_RL78_OP_NEG
5227 ENUMX
5228 BFD_RELOC_RL78_OP_AND
5229 ENUMX
5230 BFD_RELOC_RL78_OP_SHRA
5231 ENUMX
5232 BFD_RELOC_RL78_ABS8
5233 ENUMX
5234 BFD_RELOC_RL78_ABS16
5235 ENUMX
5236 BFD_RELOC_RL78_ABS16_REV
5237 ENUMX
5238 BFD_RELOC_RL78_ABS32
5239 ENUMX
5240 BFD_RELOC_RL78_ABS32_REV
5241 ENUMX
5242 BFD_RELOC_RL78_ABS16U
5243 ENUMX
5244 BFD_RELOC_RL78_ABS16UW
5245 ENUMX
5246 BFD_RELOC_RL78_ABS16UL
5247 ENUMX
5248 BFD_RELOC_RL78_RELAX
5249 ENUMX
5250 BFD_RELOC_RL78_HI16
5251 ENUMX
5252 BFD_RELOC_RL78_HI8
5253 ENUMX
5254 BFD_RELOC_RL78_LO16
5255 ENUMX
5256 BFD_RELOC_RL78_CODE
5257 ENUMX
5258 BFD_RELOC_RL78_SADDR
5259 ENUMDOC
5260 Renesas RL78 Relocations.
5261
5262 ENUM
5263 BFD_RELOC_RX_NEG8
5264 ENUMX
5265 BFD_RELOC_RX_NEG16
5266 ENUMX
5267 BFD_RELOC_RX_NEG24
5268 ENUMX
5269 BFD_RELOC_RX_NEG32
5270 ENUMX
5271 BFD_RELOC_RX_16_OP
5272 ENUMX
5273 BFD_RELOC_RX_24_OP
5274 ENUMX
5275 BFD_RELOC_RX_32_OP
5276 ENUMX
5277 BFD_RELOC_RX_8U
5278 ENUMX
5279 BFD_RELOC_RX_16U
5280 ENUMX
5281 BFD_RELOC_RX_24U
5282 ENUMX
5283 BFD_RELOC_RX_DIR3U_PCREL
5284 ENUMX
5285 BFD_RELOC_RX_DIFF
5286 ENUMX
5287 BFD_RELOC_RX_GPRELB
5288 ENUMX
5289 BFD_RELOC_RX_GPRELW
5290 ENUMX
5291 BFD_RELOC_RX_GPRELL
5292 ENUMX
5293 BFD_RELOC_RX_SYM
5294 ENUMX
5295 BFD_RELOC_RX_OP_SUBTRACT
5296 ENUMX
5297 BFD_RELOC_RX_OP_NEG
5298 ENUMX
5299 BFD_RELOC_RX_ABS8
5300 ENUMX
5301 BFD_RELOC_RX_ABS16
5302 ENUMX
5303 BFD_RELOC_RX_ABS16_REV
5304 ENUMX
5305 BFD_RELOC_RX_ABS32
5306 ENUMX
5307 BFD_RELOC_RX_ABS32_REV
5308 ENUMX
5309 BFD_RELOC_RX_ABS16U
5310 ENUMX
5311 BFD_RELOC_RX_ABS16UW
5312 ENUMX
5313 BFD_RELOC_RX_ABS16UL
5314 ENUMX
5315 BFD_RELOC_RX_RELAX
5316 ENUMDOC
5317 Renesas RX Relocations.
5318
5319 ENUM
5320 BFD_RELOC_390_12
5321 ENUMDOC
5322 Direct 12 bit.
5323 ENUM
5324 BFD_RELOC_390_GOT12
5325 ENUMDOC
5326 12 bit GOT offset.
5327 ENUM
5328 BFD_RELOC_390_PLT32
5329 ENUMDOC
5330 32 bit PC relative PLT address.
5331 ENUM
5332 BFD_RELOC_390_COPY
5333 ENUMDOC
5334 Copy symbol at runtime.
5335 ENUM
5336 BFD_RELOC_390_GLOB_DAT
5337 ENUMDOC
5338 Create GOT entry.
5339 ENUM
5340 BFD_RELOC_390_JMP_SLOT
5341 ENUMDOC
5342 Create PLT entry.
5343 ENUM
5344 BFD_RELOC_390_RELATIVE
5345 ENUMDOC
5346 Adjust by program base.
5347 ENUM
5348 BFD_RELOC_390_GOTPC
5349 ENUMDOC
5350 32 bit PC relative offset to GOT.
5351 ENUM
5352 BFD_RELOC_390_GOT16
5353 ENUMDOC
5354 16 bit GOT offset.
5355 ENUM
5356 BFD_RELOC_390_PC12DBL
5357 ENUMDOC
5358 PC relative 12 bit shifted by 1.
5359 ENUM
5360 BFD_RELOC_390_PLT12DBL
5361 ENUMDOC
5362 12 bit PC rel. PLT shifted by 1.
5363 ENUM
5364 BFD_RELOC_390_PC16DBL
5365 ENUMDOC
5366 PC relative 16 bit shifted by 1.
5367 ENUM
5368 BFD_RELOC_390_PLT16DBL
5369 ENUMDOC
5370 16 bit PC rel. PLT shifted by 1.
5371 ENUM
5372 BFD_RELOC_390_PC24DBL
5373 ENUMDOC
5374 PC relative 24 bit shifted by 1.
5375 ENUM
5376 BFD_RELOC_390_PLT24DBL
5377 ENUMDOC
5378 24 bit PC rel. PLT shifted by 1.
5379 ENUM
5380 BFD_RELOC_390_PC32DBL
5381 ENUMDOC
5382 PC relative 32 bit shifted by 1.
5383 ENUM
5384 BFD_RELOC_390_PLT32DBL
5385 ENUMDOC
5386 32 bit PC rel. PLT shifted by 1.
5387 ENUM
5388 BFD_RELOC_390_GOTPCDBL
5389 ENUMDOC
5390 32 bit PC rel. GOT shifted by 1.
5391 ENUM
5392 BFD_RELOC_390_GOT64
5393 ENUMDOC
5394 64 bit GOT offset.
5395 ENUM
5396 BFD_RELOC_390_PLT64
5397 ENUMDOC
5398 64 bit PC relative PLT address.
5399 ENUM
5400 BFD_RELOC_390_GOTENT
5401 ENUMDOC
5402 32 bit rel. offset to GOT entry.
5403 ENUM
5404 BFD_RELOC_390_GOTOFF64
5405 ENUMDOC
5406 64 bit offset to GOT.
5407 ENUM
5408 BFD_RELOC_390_GOTPLT12
5409 ENUMDOC
5410 12-bit offset to symbol-entry within GOT, with PLT handling.
5411 ENUM
5412 BFD_RELOC_390_GOTPLT16
5413 ENUMDOC
5414 16-bit offset to symbol-entry within GOT, with PLT handling.
5415 ENUM
5416 BFD_RELOC_390_GOTPLT32
5417 ENUMDOC
5418 32-bit offset to symbol-entry within GOT, with PLT handling.
5419 ENUM
5420 BFD_RELOC_390_GOTPLT64
5421 ENUMDOC
5422 64-bit offset to symbol-entry within GOT, with PLT handling.
5423 ENUM
5424 BFD_RELOC_390_GOTPLTENT
5425 ENUMDOC
5426 32-bit rel. offset to symbol-entry within GOT, with PLT handling.
5427 ENUM
5428 BFD_RELOC_390_PLTOFF16
5429 ENUMDOC
5430 16-bit rel. offset from the GOT to a PLT entry.
5431 ENUM
5432 BFD_RELOC_390_PLTOFF32
5433 ENUMDOC
5434 32-bit rel. offset from the GOT to a PLT entry.
5435 ENUM
5436 BFD_RELOC_390_PLTOFF64
5437 ENUMDOC
5438 64-bit rel. offset from the GOT to a PLT entry.
5439
5440 ENUM
5441 BFD_RELOC_390_TLS_LOAD
5442 ENUMX
5443 BFD_RELOC_390_TLS_GDCALL
5444 ENUMX
5445 BFD_RELOC_390_TLS_LDCALL
5446 ENUMX
5447 BFD_RELOC_390_TLS_GD32
5448 ENUMX
5449 BFD_RELOC_390_TLS_GD64
5450 ENUMX
5451 BFD_RELOC_390_TLS_GOTIE12
5452 ENUMX
5453 BFD_RELOC_390_TLS_GOTIE32
5454 ENUMX
5455 BFD_RELOC_390_TLS_GOTIE64
5456 ENUMX
5457 BFD_RELOC_390_TLS_LDM32
5458 ENUMX
5459 BFD_RELOC_390_TLS_LDM64
5460 ENUMX
5461 BFD_RELOC_390_TLS_IE32
5462 ENUMX
5463 BFD_RELOC_390_TLS_IE64
5464 ENUMX
5465 BFD_RELOC_390_TLS_IEENT
5466 ENUMX
5467 BFD_RELOC_390_TLS_LE32
5468 ENUMX
5469 BFD_RELOC_390_TLS_LE64
5470 ENUMX
5471 BFD_RELOC_390_TLS_LDO32
5472 ENUMX
5473 BFD_RELOC_390_TLS_LDO64
5474 ENUMX
5475 BFD_RELOC_390_TLS_DTPMOD
5476 ENUMX
5477 BFD_RELOC_390_TLS_DTPOFF
5478 ENUMX
5479 BFD_RELOC_390_TLS_TPOFF
5480 ENUMDOC
5481 s390 tls relocations.
5482
5483 ENUM
5484 BFD_RELOC_390_20
5485 ENUMX
5486 BFD_RELOC_390_GOT20
5487 ENUMX
5488 BFD_RELOC_390_GOTPLT20
5489 ENUMX
5490 BFD_RELOC_390_TLS_GOTIE20
5491 ENUMDOC
5492 Long displacement extension.
5493
5494 ENUM
5495 BFD_RELOC_390_IRELATIVE
5496 ENUMDOC
5497 STT_GNU_IFUNC relocation.
5498
5499 ENUM
5500 BFD_RELOC_SCORE_GPREL15
5501 ENUMDOC
5502 Score relocations
5503 Low 16 bit for load/store
5504 ENUM
5505 BFD_RELOC_SCORE_DUMMY2
5506 ENUMX
5507 BFD_RELOC_SCORE_JMP
5508 ENUMDOC
5509 This is a 24-bit reloc with the right 1 bit assumed to be 0
5510 ENUM
5511 BFD_RELOC_SCORE_BRANCH
5512 ENUMDOC
5513 This is a 19-bit reloc with the right 1 bit assumed to be 0
5514 ENUM
5515 BFD_RELOC_SCORE_IMM30
5516 ENUMDOC
5517 This is a 32-bit reloc for 48-bit instructions.
5518 ENUM
5519 BFD_RELOC_SCORE_IMM32
5520 ENUMDOC
5521 This is a 32-bit reloc for 48-bit instructions.
5522 ENUM
5523 BFD_RELOC_SCORE16_JMP
5524 ENUMDOC
5525 This is a 11-bit reloc with the right 1 bit assumed to be 0
5526 ENUM
5527 BFD_RELOC_SCORE16_BRANCH
5528 ENUMDOC
5529 This is a 8-bit reloc with the right 1 bit assumed to be 0
5530 ENUM
5531 BFD_RELOC_SCORE_BCMP
5532 ENUMDOC
5533 This is a 9-bit reloc with the right 1 bit assumed to be 0
5534 ENUM
5535 BFD_RELOC_SCORE_GOT15
5536 ENUMX
5537 BFD_RELOC_SCORE_GOT_LO16
5538 ENUMX
5539 BFD_RELOC_SCORE_CALL15
5540 ENUMX
5541 BFD_RELOC_SCORE_DUMMY_HI16
5542 ENUMDOC
5543 Undocumented Score relocs
5544
5545 ENUM
5546 BFD_RELOC_IP2K_FR9
5547 ENUMDOC
5548 Scenix IP2K - 9-bit register number / data address
5549 ENUM
5550 BFD_RELOC_IP2K_BANK
5551 ENUMDOC
5552 Scenix IP2K - 4-bit register/data bank number
5553 ENUM
5554 BFD_RELOC_IP2K_ADDR16CJP
5555 ENUMDOC
5556 Scenix IP2K - low 13 bits of instruction word address
5557 ENUM
5558 BFD_RELOC_IP2K_PAGE3
5559 ENUMDOC
5560 Scenix IP2K - high 3 bits of instruction word address
5561 ENUM
5562 BFD_RELOC_IP2K_LO8DATA
5563 ENUMX
5564 BFD_RELOC_IP2K_HI8DATA
5565 ENUMX
5566 BFD_RELOC_IP2K_EX8DATA
5567 ENUMDOC
5568 Scenix IP2K - ext/low/high 8 bits of data address
5569 ENUM
5570 BFD_RELOC_IP2K_LO8INSN
5571 ENUMX
5572 BFD_RELOC_IP2K_HI8INSN
5573 ENUMDOC
5574 Scenix IP2K - low/high 8 bits of instruction word address
5575 ENUM
5576 BFD_RELOC_IP2K_PC_SKIP
5577 ENUMDOC
5578 Scenix IP2K - even/odd PC modifier to modify snb pcl.0
5579 ENUM
5580 BFD_RELOC_IP2K_TEXT
5581 ENUMDOC
5582 Scenix IP2K - 16 bit word address in text section.
5583 ENUM
5584 BFD_RELOC_IP2K_FR_OFFSET
5585 ENUMDOC
5586 Scenix IP2K - 7-bit sp or dp offset
5587 ENUM
5588 BFD_RELOC_VPE4KMATH_DATA
5589 ENUMX
5590 BFD_RELOC_VPE4KMATH_INSN
5591 ENUMDOC
5592 Scenix VPE4K coprocessor - data/insn-space addressing
5593
5594 ENUM
5595 BFD_RELOC_VTABLE_INHERIT
5596 ENUMX
5597 BFD_RELOC_VTABLE_ENTRY
5598 ENUMDOC
5599 These two relocations are used by the linker to determine which of
5600 the entries in a C++ virtual function table are actually used. When
5601 the --gc-sections option is given, the linker will zero out the entries
5602 that are not used, so that the code for those functions need not be
5603 included in the output.
5604
5605 VTABLE_INHERIT is a zero-space relocation used to describe to the
5606 linker the inheritance tree of a C++ virtual function table. The
5607 relocation's symbol should be the parent class' vtable, and the
5608 relocation should be located at the child vtable.
5609
5610 VTABLE_ENTRY is a zero-space relocation that describes the use of a
5611 virtual function table entry. The reloc's symbol should refer to the
5612 table of the class mentioned in the code. Off of that base, an offset
5613 describes the entry that is being used. For Rela hosts, this offset
5614 is stored in the reloc's addend. For Rel hosts, we are forced to put
5615 this offset in the reloc's section offset.
5616
5617 ENUM
5618 BFD_RELOC_IA64_IMM14
5619 ENUMX
5620 BFD_RELOC_IA64_IMM22
5621 ENUMX
5622 BFD_RELOC_IA64_IMM64
5623 ENUMX
5624 BFD_RELOC_IA64_DIR32MSB
5625 ENUMX
5626 BFD_RELOC_IA64_DIR32LSB
5627 ENUMX
5628 BFD_RELOC_IA64_DIR64MSB
5629 ENUMX
5630 BFD_RELOC_IA64_DIR64LSB
5631 ENUMX
5632 BFD_RELOC_IA64_GPREL22
5633 ENUMX
5634 BFD_RELOC_IA64_GPREL64I
5635 ENUMX
5636 BFD_RELOC_IA64_GPREL32MSB
5637 ENUMX
5638 BFD_RELOC_IA64_GPREL32LSB
5639 ENUMX
5640 BFD_RELOC_IA64_GPREL64MSB
5641 ENUMX
5642 BFD_RELOC_IA64_GPREL64LSB
5643 ENUMX
5644 BFD_RELOC_IA64_LTOFF22
5645 ENUMX
5646 BFD_RELOC_IA64_LTOFF64I
5647 ENUMX
5648 BFD_RELOC_IA64_PLTOFF22
5649 ENUMX
5650 BFD_RELOC_IA64_PLTOFF64I
5651 ENUMX
5652 BFD_RELOC_IA64_PLTOFF64MSB
5653 ENUMX
5654 BFD_RELOC_IA64_PLTOFF64LSB
5655 ENUMX
5656 BFD_RELOC_IA64_FPTR64I
5657 ENUMX
5658 BFD_RELOC_IA64_FPTR32MSB
5659 ENUMX
5660 BFD_RELOC_IA64_FPTR32LSB
5661 ENUMX
5662 BFD_RELOC_IA64_FPTR64MSB
5663 ENUMX
5664 BFD_RELOC_IA64_FPTR64LSB
5665 ENUMX
5666 BFD_RELOC_IA64_PCREL21B
5667 ENUMX
5668 BFD_RELOC_IA64_PCREL21BI
5669 ENUMX
5670 BFD_RELOC_IA64_PCREL21M
5671 ENUMX
5672 BFD_RELOC_IA64_PCREL21F
5673 ENUMX
5674 BFD_RELOC_IA64_PCREL22
5675 ENUMX
5676 BFD_RELOC_IA64_PCREL60B
5677 ENUMX
5678 BFD_RELOC_IA64_PCREL64I
5679 ENUMX
5680 BFD_RELOC_IA64_PCREL32MSB
5681 ENUMX
5682 BFD_RELOC_IA64_PCREL32LSB
5683 ENUMX
5684 BFD_RELOC_IA64_PCREL64MSB
5685 ENUMX
5686 BFD_RELOC_IA64_PCREL64LSB
5687 ENUMX
5688 BFD_RELOC_IA64_LTOFF_FPTR22
5689 ENUMX
5690 BFD_RELOC_IA64_LTOFF_FPTR64I
5691 ENUMX
5692 BFD_RELOC_IA64_LTOFF_FPTR32MSB
5693 ENUMX
5694 BFD_RELOC_IA64_LTOFF_FPTR32LSB
5695 ENUMX
5696 BFD_RELOC_IA64_LTOFF_FPTR64MSB
5697 ENUMX
5698 BFD_RELOC_IA64_LTOFF_FPTR64LSB
5699 ENUMX
5700 BFD_RELOC_IA64_SEGREL32MSB
5701 ENUMX
5702 BFD_RELOC_IA64_SEGREL32LSB
5703 ENUMX
5704 BFD_RELOC_IA64_SEGREL64MSB
5705 ENUMX
5706 BFD_RELOC_IA64_SEGREL64LSB
5707 ENUMX
5708 BFD_RELOC_IA64_SECREL32MSB
5709 ENUMX
5710 BFD_RELOC_IA64_SECREL32LSB
5711 ENUMX
5712 BFD_RELOC_IA64_SECREL64MSB
5713 ENUMX
5714 BFD_RELOC_IA64_SECREL64LSB
5715 ENUMX
5716 BFD_RELOC_IA64_REL32MSB
5717 ENUMX
5718 BFD_RELOC_IA64_REL32LSB
5719 ENUMX
5720 BFD_RELOC_IA64_REL64MSB
5721 ENUMX
5722 BFD_RELOC_IA64_REL64LSB
5723 ENUMX
5724 BFD_RELOC_IA64_LTV32MSB
5725 ENUMX
5726 BFD_RELOC_IA64_LTV32LSB
5727 ENUMX
5728 BFD_RELOC_IA64_LTV64MSB
5729 ENUMX
5730 BFD_RELOC_IA64_LTV64LSB
5731 ENUMX
5732 BFD_RELOC_IA64_IPLTMSB
5733 ENUMX
5734 BFD_RELOC_IA64_IPLTLSB
5735 ENUMX
5736 BFD_RELOC_IA64_COPY
5737 ENUMX
5738 BFD_RELOC_IA64_LTOFF22X
5739 ENUMX
5740 BFD_RELOC_IA64_LDXMOV
5741 ENUMX
5742 BFD_RELOC_IA64_TPREL14
5743 ENUMX
5744 BFD_RELOC_IA64_TPREL22
5745 ENUMX
5746 BFD_RELOC_IA64_TPREL64I
5747 ENUMX
5748 BFD_RELOC_IA64_TPREL64MSB
5749 ENUMX
5750 BFD_RELOC_IA64_TPREL64LSB
5751 ENUMX
5752 BFD_RELOC_IA64_LTOFF_TPREL22
5753 ENUMX
5754 BFD_RELOC_IA64_DTPMOD64MSB
5755 ENUMX
5756 BFD_RELOC_IA64_DTPMOD64LSB
5757 ENUMX
5758 BFD_RELOC_IA64_LTOFF_DTPMOD22
5759 ENUMX
5760 BFD_RELOC_IA64_DTPREL14
5761 ENUMX
5762 BFD_RELOC_IA64_DTPREL22
5763 ENUMX
5764 BFD_RELOC_IA64_DTPREL64I
5765 ENUMX
5766 BFD_RELOC_IA64_DTPREL32MSB
5767 ENUMX
5768 BFD_RELOC_IA64_DTPREL32LSB
5769 ENUMX
5770 BFD_RELOC_IA64_DTPREL64MSB
5771 ENUMX
5772 BFD_RELOC_IA64_DTPREL64LSB
5773 ENUMX
5774 BFD_RELOC_IA64_LTOFF_DTPREL22
5775 ENUMDOC
5776 Intel IA64 Relocations.
5777
5778 ENUM
5779 BFD_RELOC_M68HC11_HI8
5780 ENUMDOC
5781 Motorola 68HC11 reloc.
5782 This is the 8 bit high part of an absolute address.
5783 ENUM
5784 BFD_RELOC_M68HC11_LO8
5785 ENUMDOC
5786 Motorola 68HC11 reloc.
5787 This is the 8 bit low part of an absolute address.
5788 ENUM
5789 BFD_RELOC_M68HC11_3B
5790 ENUMDOC
5791 Motorola 68HC11 reloc.
5792 This is the 3 bit of a value.
5793 ENUM
5794 BFD_RELOC_M68HC11_RL_JUMP
5795 ENUMDOC
5796 Motorola 68HC11 reloc.
5797 This reloc marks the beginning of a jump/call instruction.
5798 It is used for linker relaxation to correctly identify beginning
5799 of instruction and change some branches to use PC-relative
5800 addressing mode.
5801 ENUM
5802 BFD_RELOC_M68HC11_RL_GROUP
5803 ENUMDOC
5804 Motorola 68HC11 reloc.
5805 This reloc marks a group of several instructions that gcc generates
5806 and for which the linker relaxation pass can modify and/or remove
5807 some of them.
5808 ENUM
5809 BFD_RELOC_M68HC11_LO16
5810 ENUMDOC
5811 Motorola 68HC11 reloc.
5812 This is the 16-bit lower part of an address. It is used for 'call'
5813 instruction to specify the symbol address without any special
5814 transformation (due to memory bank window).
5815 ENUM
5816 BFD_RELOC_M68HC11_PAGE
5817 ENUMDOC
5818 Motorola 68HC11 reloc.
5819 This is a 8-bit reloc that specifies the page number of an address.
5820 It is used by 'call' instruction to specify the page number of
5821 the symbol.
5822 ENUM
5823 BFD_RELOC_M68HC11_24
5824 ENUMDOC
5825 Motorola 68HC11 reloc.
5826 This is a 24-bit reloc that represents the address with a 16-bit
5827 value and a 8-bit page number. The symbol address is transformed
5828 to follow the 16K memory bank of 68HC12 (seen as mapped in the window).
5829 ENUM
5830 BFD_RELOC_M68HC12_5B
5831 ENUMDOC
5832 Motorola 68HC12 reloc.
5833 This is the 5 bits of a value.
5834 ENUM
5835 BFD_RELOC_XGATE_RL_JUMP
5836 ENUMDOC
5837 Freescale XGATE reloc.
5838 This reloc marks the beginning of a bra/jal instruction.
5839 ENUM
5840 BFD_RELOC_XGATE_RL_GROUP
5841 ENUMDOC
5842 Freescale XGATE reloc.
5843 This reloc marks a group of several instructions that gcc generates
5844 and for which the linker relaxation pass can modify and/or remove
5845 some of them.
5846 ENUM
5847 BFD_RELOC_XGATE_LO16
5848 ENUMDOC
5849 Freescale XGATE reloc.
5850 This is the 16-bit lower part of an address. It is used for the '16-bit'
5851 instructions.
5852 ENUM
5853 BFD_RELOC_XGATE_GPAGE
5854 ENUMDOC
5855 Freescale XGATE reloc.
5856 ENUM
5857 BFD_RELOC_XGATE_24
5858 ENUMDOC
5859 Freescale XGATE reloc.
5860 ENUM
5861 BFD_RELOC_XGATE_PCREL_9
5862 ENUMDOC
5863 Freescale XGATE reloc.
5864 This is a 9-bit pc-relative reloc.
5865 ENUM
5866 BFD_RELOC_XGATE_PCREL_10
5867 ENUMDOC
5868 Freescale XGATE reloc.
5869 This is a 10-bit pc-relative reloc.
5870 ENUM
5871 BFD_RELOC_XGATE_IMM8_LO
5872 ENUMDOC
5873 Freescale XGATE reloc.
5874 This is the 16-bit lower part of an address. It is used for the '16-bit'
5875 instructions.
5876 ENUM
5877 BFD_RELOC_XGATE_IMM8_HI
5878 ENUMDOC
5879 Freescale XGATE reloc.
5880 This is the 16-bit higher part of an address. It is used for the '16-bit'
5881 instructions.
5882 ENUM
5883 BFD_RELOC_XGATE_IMM3
5884 ENUMDOC
5885 Freescale XGATE reloc.
5886 This is a 3-bit pc-relative reloc.
5887 ENUM
5888 BFD_RELOC_XGATE_IMM4
5889 ENUMDOC
5890 Freescale XGATE reloc.
5891 This is a 4-bit pc-relative reloc.
5892 ENUM
5893 BFD_RELOC_XGATE_IMM5
5894 ENUMDOC
5895 Freescale XGATE reloc.
5896 This is a 5-bit pc-relative reloc.
5897 ENUM
5898 BFD_RELOC_M68HC12_9B
5899 ENUMDOC
5900 Motorola 68HC12 reloc.
5901 This is the 9 bits of a value.
5902 ENUM
5903 BFD_RELOC_M68HC12_16B
5904 ENUMDOC
5905 Motorola 68HC12 reloc.
5906 This is the 16 bits of a value.
5907 ENUM
5908 BFD_RELOC_M68HC12_9_PCREL
5909 ENUMDOC
5910 Motorola 68HC12/XGATE reloc.
5911 This is a PCREL9 branch.
5912 ENUM
5913 BFD_RELOC_M68HC12_10_PCREL
5914 ENUMDOC
5915 Motorola 68HC12/XGATE reloc.
5916 This is a PCREL10 branch.
5917 ENUM
5918 BFD_RELOC_M68HC12_LO8XG
5919 ENUMDOC
5920 Motorola 68HC12/XGATE reloc.
5921 This is the 8 bit low part of an absolute address and immediately precedes
5922 a matching HI8XG part.
5923 ENUM
5924 BFD_RELOC_M68HC12_HI8XG
5925 ENUMDOC
5926 Motorola 68HC12/XGATE reloc.
5927 This is the 8 bit high part of an absolute address and immediately follows
5928 a matching LO8XG part.
5929 ENUM
5930 BFD_RELOC_S12Z_15_PCREL
5931 ENUMDOC
5932 Freescale S12Z reloc.
5933 This is a 15 bit relative address. If the most significant bits are all zero
5934 then it may be truncated to 8 bits.
5935 ENUM
5936 BFD_RELOC_16C_NUM08
5937 ENUMX
5938 BFD_RELOC_16C_NUM08_C
5939 ENUMX
5940 BFD_RELOC_16C_NUM16
5941 ENUMX
5942 BFD_RELOC_16C_NUM16_C
5943 ENUMX
5944 BFD_RELOC_16C_NUM32
5945 ENUMX
5946 BFD_RELOC_16C_NUM32_C
5947 ENUMX
5948 BFD_RELOC_16C_DISP04
5949 ENUMX
5950 BFD_RELOC_16C_DISP04_C
5951 ENUMX
5952 BFD_RELOC_16C_DISP08
5953 ENUMX
5954 BFD_RELOC_16C_DISP08_C
5955 ENUMX
5956 BFD_RELOC_16C_DISP16
5957 ENUMX
5958 BFD_RELOC_16C_DISP16_C
5959 ENUMX
5960 BFD_RELOC_16C_DISP24
5961 ENUMX
5962 BFD_RELOC_16C_DISP24_C
5963 ENUMX
5964 BFD_RELOC_16C_DISP24a
5965 ENUMX
5966 BFD_RELOC_16C_DISP24a_C
5967 ENUMX
5968 BFD_RELOC_16C_REG04
5969 ENUMX
5970 BFD_RELOC_16C_REG04_C
5971 ENUMX
5972 BFD_RELOC_16C_REG04a
5973 ENUMX
5974 BFD_RELOC_16C_REG04a_C
5975 ENUMX
5976 BFD_RELOC_16C_REG14
5977 ENUMX
5978 BFD_RELOC_16C_REG14_C
5979 ENUMX
5980 BFD_RELOC_16C_REG16
5981 ENUMX
5982 BFD_RELOC_16C_REG16_C
5983 ENUMX
5984 BFD_RELOC_16C_REG20
5985 ENUMX
5986 BFD_RELOC_16C_REG20_C
5987 ENUMX
5988 BFD_RELOC_16C_ABS20
5989 ENUMX
5990 BFD_RELOC_16C_ABS20_C
5991 ENUMX
5992 BFD_RELOC_16C_ABS24
5993 ENUMX
5994 BFD_RELOC_16C_ABS24_C
5995 ENUMX
5996 BFD_RELOC_16C_IMM04
5997 ENUMX
5998 BFD_RELOC_16C_IMM04_C
5999 ENUMX
6000 BFD_RELOC_16C_IMM16
6001 ENUMX
6002 BFD_RELOC_16C_IMM16_C
6003 ENUMX
6004 BFD_RELOC_16C_IMM20
6005 ENUMX
6006 BFD_RELOC_16C_IMM20_C
6007 ENUMX
6008 BFD_RELOC_16C_IMM24
6009 ENUMX
6010 BFD_RELOC_16C_IMM24_C
6011 ENUMX
6012 BFD_RELOC_16C_IMM32
6013 ENUMX
6014 BFD_RELOC_16C_IMM32_C
6015 ENUMDOC
6016 NS CR16C Relocations.
6017
6018 ENUM
6019 BFD_RELOC_CR16_NUM8
6020 ENUMX
6021 BFD_RELOC_CR16_NUM16
6022 ENUMX
6023 BFD_RELOC_CR16_NUM32
6024 ENUMX
6025 BFD_RELOC_CR16_NUM32a
6026 ENUMX
6027 BFD_RELOC_CR16_REGREL0
6028 ENUMX
6029 BFD_RELOC_CR16_REGREL4
6030 ENUMX
6031 BFD_RELOC_CR16_REGREL4a
6032 ENUMX
6033 BFD_RELOC_CR16_REGREL14
6034 ENUMX
6035 BFD_RELOC_CR16_REGREL14a
6036 ENUMX
6037 BFD_RELOC_CR16_REGREL16
6038 ENUMX
6039 BFD_RELOC_CR16_REGREL20
6040 ENUMX
6041 BFD_RELOC_CR16_REGREL20a
6042 ENUMX
6043 BFD_RELOC_CR16_ABS20
6044 ENUMX
6045 BFD_RELOC_CR16_ABS24
6046 ENUMX
6047 BFD_RELOC_CR16_IMM4
6048 ENUMX
6049 BFD_RELOC_CR16_IMM8
6050 ENUMX
6051 BFD_RELOC_CR16_IMM16
6052 ENUMX
6053 BFD_RELOC_CR16_IMM20
6054 ENUMX
6055 BFD_RELOC_CR16_IMM24
6056 ENUMX
6057 BFD_RELOC_CR16_IMM32
6058 ENUMX
6059 BFD_RELOC_CR16_IMM32a
6060 ENUMX
6061 BFD_RELOC_CR16_DISP4
6062 ENUMX
6063 BFD_RELOC_CR16_DISP8
6064 ENUMX
6065 BFD_RELOC_CR16_DISP16
6066 ENUMX
6067 BFD_RELOC_CR16_DISP20
6068 ENUMX
6069 BFD_RELOC_CR16_DISP24
6070 ENUMX
6071 BFD_RELOC_CR16_DISP24a
6072 ENUMX
6073 BFD_RELOC_CR16_SWITCH8
6074 ENUMX
6075 BFD_RELOC_CR16_SWITCH16
6076 ENUMX
6077 BFD_RELOC_CR16_SWITCH32
6078 ENUMX
6079 BFD_RELOC_CR16_GOT_REGREL20
6080 ENUMX
6081 BFD_RELOC_CR16_GOTC_REGREL20
6082 ENUMX
6083 BFD_RELOC_CR16_GLOB_DAT
6084 ENUMDOC
6085 NS CR16 Relocations.
6086
6087 ENUM
6088 BFD_RELOC_CRX_REL4
6089 ENUMX
6090 BFD_RELOC_CRX_REL8
6091 ENUMX
6092 BFD_RELOC_CRX_REL8_CMP
6093 ENUMX
6094 BFD_RELOC_CRX_REL16
6095 ENUMX
6096 BFD_RELOC_CRX_REL24
6097 ENUMX
6098 BFD_RELOC_CRX_REL32
6099 ENUMX
6100 BFD_RELOC_CRX_REGREL12
6101 ENUMX
6102 BFD_RELOC_CRX_REGREL22
6103 ENUMX
6104 BFD_RELOC_CRX_REGREL28
6105 ENUMX
6106 BFD_RELOC_CRX_REGREL32
6107 ENUMX
6108 BFD_RELOC_CRX_ABS16
6109 ENUMX
6110 BFD_RELOC_CRX_ABS32
6111 ENUMX
6112 BFD_RELOC_CRX_NUM8
6113 ENUMX
6114 BFD_RELOC_CRX_NUM16
6115 ENUMX
6116 BFD_RELOC_CRX_NUM32
6117 ENUMX
6118 BFD_RELOC_CRX_IMM16
6119 ENUMX
6120 BFD_RELOC_CRX_IMM32
6121 ENUMX
6122 BFD_RELOC_CRX_SWITCH8
6123 ENUMX
6124 BFD_RELOC_CRX_SWITCH16
6125 ENUMX
6126 BFD_RELOC_CRX_SWITCH32
6127 ENUMDOC
6128 NS CRX Relocations.
6129
6130 ENUM
6131 BFD_RELOC_CRIS_BDISP8
6132 ENUMX
6133 BFD_RELOC_CRIS_UNSIGNED_5
6134 ENUMX
6135 BFD_RELOC_CRIS_SIGNED_6
6136 ENUMX
6137 BFD_RELOC_CRIS_UNSIGNED_6
6138 ENUMX
6139 BFD_RELOC_CRIS_SIGNED_8
6140 ENUMX
6141 BFD_RELOC_CRIS_UNSIGNED_8
6142 ENUMX
6143 BFD_RELOC_CRIS_SIGNED_16
6144 ENUMX
6145 BFD_RELOC_CRIS_UNSIGNED_16
6146 ENUMX
6147 BFD_RELOC_CRIS_LAPCQ_OFFSET
6148 ENUMX
6149 BFD_RELOC_CRIS_UNSIGNED_4
6150 ENUMDOC
6151 These relocs are only used within the CRIS assembler. They are not
6152 (at present) written to any object files.
6153 ENUM
6154 BFD_RELOC_CRIS_COPY
6155 ENUMX
6156 BFD_RELOC_CRIS_GLOB_DAT
6157 ENUMX
6158 BFD_RELOC_CRIS_JUMP_SLOT
6159 ENUMX
6160 BFD_RELOC_CRIS_RELATIVE
6161 ENUMDOC
6162 Relocs used in ELF shared libraries for CRIS.
6163 ENUM
6164 BFD_RELOC_CRIS_32_GOT
6165 ENUMDOC
6166 32-bit offset to symbol-entry within GOT.
6167 ENUM
6168 BFD_RELOC_CRIS_16_GOT
6169 ENUMDOC
6170 16-bit offset to symbol-entry within GOT.
6171 ENUM
6172 BFD_RELOC_CRIS_32_GOTPLT
6173 ENUMDOC
6174 32-bit offset to symbol-entry within GOT, with PLT handling.
6175 ENUM
6176 BFD_RELOC_CRIS_16_GOTPLT
6177 ENUMDOC
6178 16-bit offset to symbol-entry within GOT, with PLT handling.
6179 ENUM
6180 BFD_RELOC_CRIS_32_GOTREL
6181 ENUMDOC
6182 32-bit offset to symbol, relative to GOT.
6183 ENUM
6184 BFD_RELOC_CRIS_32_PLT_GOTREL
6185 ENUMDOC
6186 32-bit offset to symbol with PLT entry, relative to GOT.
6187 ENUM
6188 BFD_RELOC_CRIS_32_PLT_PCREL
6189 ENUMDOC
6190 32-bit offset to symbol with PLT entry, relative to this relocation.
6191
6192 ENUM
6193 BFD_RELOC_CRIS_32_GOT_GD
6194 ENUMX
6195 BFD_RELOC_CRIS_16_GOT_GD
6196 ENUMX
6197 BFD_RELOC_CRIS_32_GD
6198 ENUMX
6199 BFD_RELOC_CRIS_DTP
6200 ENUMX
6201 BFD_RELOC_CRIS_32_DTPREL
6202 ENUMX
6203 BFD_RELOC_CRIS_16_DTPREL
6204 ENUMX
6205 BFD_RELOC_CRIS_32_GOT_TPREL
6206 ENUMX
6207 BFD_RELOC_CRIS_16_GOT_TPREL
6208 ENUMX
6209 BFD_RELOC_CRIS_32_TPREL
6210 ENUMX
6211 BFD_RELOC_CRIS_16_TPREL
6212 ENUMX
6213 BFD_RELOC_CRIS_DTPMOD
6214 ENUMX
6215 BFD_RELOC_CRIS_32_IE
6216 ENUMDOC
6217 Relocs used in TLS code for CRIS.
6218
6219 ENUM
6220 BFD_RELOC_OR1K_REL_26
6221 ENUMX
6222 BFD_RELOC_OR1K_SLO16
6223 ENUMX
6224 BFD_RELOC_OR1K_PCREL_PG21
6225 ENUMX
6226 BFD_RELOC_OR1K_LO13
6227 ENUMX
6228 BFD_RELOC_OR1K_SLO13
6229 ENUMX
6230 BFD_RELOC_OR1K_GOTPC_HI16
6231 ENUMX
6232 BFD_RELOC_OR1K_GOTPC_LO16
6233 ENUMX
6234 BFD_RELOC_OR1K_GOT16
6235 ENUMX
6236 BFD_RELOC_OR1K_GOT_PG21
6237 ENUMX
6238 BFD_RELOC_OR1K_GOT_LO13
6239 ENUMX
6240 BFD_RELOC_OR1K_PLT26
6241 ENUMX
6242 BFD_RELOC_OR1K_PLTA26
6243 ENUMX
6244 BFD_RELOC_OR1K_GOTOFF_SLO16
6245 ENUMX
6246 BFD_RELOC_OR1K_COPY
6247 ENUMX
6248 BFD_RELOC_OR1K_GLOB_DAT
6249 ENUMX
6250 BFD_RELOC_OR1K_JMP_SLOT
6251 ENUMX
6252 BFD_RELOC_OR1K_RELATIVE
6253 ENUMX
6254 BFD_RELOC_OR1K_TLS_GD_HI16
6255 ENUMX
6256 BFD_RELOC_OR1K_TLS_GD_LO16
6257 ENUMX
6258 BFD_RELOC_OR1K_TLS_GD_PG21
6259 ENUMX
6260 BFD_RELOC_OR1K_TLS_GD_LO13
6261 ENUMX
6262 BFD_RELOC_OR1K_TLS_LDM_HI16
6263 ENUMX
6264 BFD_RELOC_OR1K_TLS_LDM_LO16
6265 ENUMX
6266 BFD_RELOC_OR1K_TLS_LDM_PG21
6267 ENUMX
6268 BFD_RELOC_OR1K_TLS_LDM_LO13
6269 ENUMX
6270 BFD_RELOC_OR1K_TLS_LDO_HI16
6271 ENUMX
6272 BFD_RELOC_OR1K_TLS_LDO_LO16
6273 ENUMX
6274 BFD_RELOC_OR1K_TLS_IE_HI16
6275 ENUMX
6276 BFD_RELOC_OR1K_TLS_IE_AHI16
6277 ENUMX
6278 BFD_RELOC_OR1K_TLS_IE_LO16
6279 ENUMX
6280 BFD_RELOC_OR1K_TLS_IE_PG21
6281 ENUMX
6282 BFD_RELOC_OR1K_TLS_IE_LO13
6283 ENUMX
6284 BFD_RELOC_OR1K_TLS_LE_HI16
6285 ENUMX
6286 BFD_RELOC_OR1K_TLS_LE_AHI16
6287 ENUMX
6288 BFD_RELOC_OR1K_TLS_LE_LO16
6289 ENUMX
6290 BFD_RELOC_OR1K_TLS_LE_SLO16
6291 ENUMX
6292 BFD_RELOC_OR1K_TLS_TPOFF
6293 ENUMX
6294 BFD_RELOC_OR1K_TLS_DTPOFF
6295 ENUMX
6296 BFD_RELOC_OR1K_TLS_DTPMOD
6297 ENUMDOC
6298 OpenRISC 1000 Relocations.
6299
6300 ENUM
6301 BFD_RELOC_H8_DIR16A8
6302 ENUMX
6303 BFD_RELOC_H8_DIR16R8
6304 ENUMX
6305 BFD_RELOC_H8_DIR24A8
6306 ENUMX
6307 BFD_RELOC_H8_DIR24R8
6308 ENUMX
6309 BFD_RELOC_H8_DIR32A16
6310 ENUMX
6311 BFD_RELOC_H8_DISP32A16
6312 ENUMDOC
6313 H8 elf Relocations.
6314
6315 ENUM
6316 BFD_RELOC_XSTORMY16_REL_12
6317 ENUMX
6318 BFD_RELOC_XSTORMY16_12
6319 ENUMX
6320 BFD_RELOC_XSTORMY16_24
6321 ENUMX
6322 BFD_RELOC_XSTORMY16_FPTR16
6323 ENUMDOC
6324 Sony Xstormy16 Relocations.
6325
6326 ENUM
6327 BFD_RELOC_RELC
6328 ENUMDOC
6329 Self-describing complex relocations.
6330 COMMENT
6331
6332 ENUM
6333 BFD_RELOC_XC16X_PAG
6334 ENUMX
6335 BFD_RELOC_XC16X_POF
6336 ENUMX
6337 BFD_RELOC_XC16X_SEG
6338 ENUMX
6339 BFD_RELOC_XC16X_SOF
6340 ENUMDOC
6341 Infineon Relocations.
6342
6343 ENUM
6344 BFD_RELOC_VAX_GLOB_DAT
6345 ENUMX
6346 BFD_RELOC_VAX_JMP_SLOT
6347 ENUMX
6348 BFD_RELOC_VAX_RELATIVE
6349 ENUMDOC
6350 Relocations used by VAX ELF.
6351
6352 ENUM
6353 BFD_RELOC_MT_PC16
6354 ENUMDOC
6355 Morpho MT - 16 bit immediate relocation.
6356 ENUM
6357 BFD_RELOC_MT_HI16
6358 ENUMDOC
6359 Morpho MT - Hi 16 bits of an address.
6360 ENUM
6361 BFD_RELOC_MT_LO16
6362 ENUMDOC
6363 Morpho MT - Low 16 bits of an address.
6364 ENUM
6365 BFD_RELOC_MT_GNU_VTINHERIT
6366 ENUMDOC
6367 Morpho MT - Used to tell the linker which vtable entries are used.
6368 ENUM
6369 BFD_RELOC_MT_GNU_VTENTRY
6370 ENUMDOC
6371 Morpho MT - Used to tell the linker which vtable entries are used.
6372 ENUM
6373 BFD_RELOC_MT_PCINSN8
6374 ENUMDOC
6375 Morpho MT - 8 bit immediate relocation.
6376
6377 ENUM
6378 BFD_RELOC_MSP430_10_PCREL
6379 ENUMX
6380 BFD_RELOC_MSP430_16_PCREL
6381 ENUMX
6382 BFD_RELOC_MSP430_16
6383 ENUMX
6384 BFD_RELOC_MSP430_16_PCREL_BYTE
6385 ENUMX
6386 BFD_RELOC_MSP430_16_BYTE
6387 ENUMX
6388 BFD_RELOC_MSP430_2X_PCREL
6389 ENUMX
6390 BFD_RELOC_MSP430_RL_PCREL
6391 ENUMX
6392 BFD_RELOC_MSP430_ABS8
6393 ENUMX
6394 BFD_RELOC_MSP430X_PCR20_EXT_SRC
6395 ENUMX
6396 BFD_RELOC_MSP430X_PCR20_EXT_DST
6397 ENUMX
6398 BFD_RELOC_MSP430X_PCR20_EXT_ODST
6399 ENUMX
6400 BFD_RELOC_MSP430X_ABS20_EXT_SRC
6401 ENUMX
6402 BFD_RELOC_MSP430X_ABS20_EXT_DST
6403 ENUMX
6404 BFD_RELOC_MSP430X_ABS20_EXT_ODST
6405 ENUMX
6406 BFD_RELOC_MSP430X_ABS20_ADR_SRC
6407 ENUMX
6408 BFD_RELOC_MSP430X_ABS20_ADR_DST
6409 ENUMX
6410 BFD_RELOC_MSP430X_PCR16
6411 ENUMX
6412 BFD_RELOC_MSP430X_PCR20_CALL
6413 ENUMX
6414 BFD_RELOC_MSP430X_ABS16
6415 ENUMX
6416 BFD_RELOC_MSP430_ABS_HI16
6417 ENUMX
6418 BFD_RELOC_MSP430_PREL31
6419 ENUMX
6420 BFD_RELOC_MSP430_SYM_DIFF
6421 ENUMDOC
6422 msp430 specific relocation codes
6423
6424 ENUM
6425 BFD_RELOC_NIOS2_S16
6426 ENUMX
6427 BFD_RELOC_NIOS2_U16
6428 ENUMX
6429 BFD_RELOC_NIOS2_CALL26
6430 ENUMX
6431 BFD_RELOC_NIOS2_IMM5
6432 ENUMX
6433 BFD_RELOC_NIOS2_CACHE_OPX
6434 ENUMX
6435 BFD_RELOC_NIOS2_IMM6
6436 ENUMX
6437 BFD_RELOC_NIOS2_IMM8
6438 ENUMX
6439 BFD_RELOC_NIOS2_HI16
6440 ENUMX
6441 BFD_RELOC_NIOS2_LO16
6442 ENUMX
6443 BFD_RELOC_NIOS2_HIADJ16
6444 ENUMX
6445 BFD_RELOC_NIOS2_GPREL
6446 ENUMX
6447 BFD_RELOC_NIOS2_UJMP
6448 ENUMX
6449 BFD_RELOC_NIOS2_CJMP
6450 ENUMX
6451 BFD_RELOC_NIOS2_CALLR
6452 ENUMX
6453 BFD_RELOC_NIOS2_ALIGN
6454 ENUMX
6455 BFD_RELOC_NIOS2_GOT16
6456 ENUMX
6457 BFD_RELOC_NIOS2_CALL16
6458 ENUMX
6459 BFD_RELOC_NIOS2_GOTOFF_LO
6460 ENUMX
6461 BFD_RELOC_NIOS2_GOTOFF_HA
6462 ENUMX
6463 BFD_RELOC_NIOS2_PCREL_LO
6464 ENUMX
6465 BFD_RELOC_NIOS2_PCREL_HA
6466 ENUMX
6467 BFD_RELOC_NIOS2_TLS_GD16
6468 ENUMX
6469 BFD_RELOC_NIOS2_TLS_LDM16
6470 ENUMX
6471 BFD_RELOC_NIOS2_TLS_LDO16
6472 ENUMX
6473 BFD_RELOC_NIOS2_TLS_IE16
6474 ENUMX
6475 BFD_RELOC_NIOS2_TLS_LE16
6476 ENUMX
6477 BFD_RELOC_NIOS2_TLS_DTPMOD
6478 ENUMX
6479 BFD_RELOC_NIOS2_TLS_DTPREL
6480 ENUMX
6481 BFD_RELOC_NIOS2_TLS_TPREL
6482 ENUMX
6483 BFD_RELOC_NIOS2_COPY
6484 ENUMX
6485 BFD_RELOC_NIOS2_GLOB_DAT
6486 ENUMX
6487 BFD_RELOC_NIOS2_JUMP_SLOT
6488 ENUMX
6489 BFD_RELOC_NIOS2_RELATIVE
6490 ENUMX
6491 BFD_RELOC_NIOS2_GOTOFF
6492 ENUMX
6493 BFD_RELOC_NIOS2_CALL26_NOAT
6494 ENUMX
6495 BFD_RELOC_NIOS2_GOT_LO
6496 ENUMX
6497 BFD_RELOC_NIOS2_GOT_HA
6498 ENUMX
6499 BFD_RELOC_NIOS2_CALL_LO
6500 ENUMX
6501 BFD_RELOC_NIOS2_CALL_HA
6502 ENUMX
6503 BFD_RELOC_NIOS2_R2_S12
6504 ENUMX
6505 BFD_RELOC_NIOS2_R2_I10_1_PCREL
6506 ENUMX
6507 BFD_RELOC_NIOS2_R2_T1I7_1_PCREL
6508 ENUMX
6509 BFD_RELOC_NIOS2_R2_T1I7_2
6510 ENUMX
6511 BFD_RELOC_NIOS2_R2_T2I4
6512 ENUMX
6513 BFD_RELOC_NIOS2_R2_T2I4_1
6514 ENUMX
6515 BFD_RELOC_NIOS2_R2_T2I4_2
6516 ENUMX
6517 BFD_RELOC_NIOS2_R2_X1I7_2
6518 ENUMX
6519 BFD_RELOC_NIOS2_R2_X2L5
6520 ENUMX
6521 BFD_RELOC_NIOS2_R2_F1I5_2
6522 ENUMX
6523 BFD_RELOC_NIOS2_R2_L5I4X1
6524 ENUMX
6525 BFD_RELOC_NIOS2_R2_T1X1I6
6526 ENUMX
6527 BFD_RELOC_NIOS2_R2_T1X1I6_2
6528 ENUMDOC
6529 Relocations used by the Altera Nios II core.
6530
6531 ENUM
6532 BFD_RELOC_PRU_U16
6533 ENUMDOC
6534 PRU LDI 16-bit unsigned data-memory relocation.
6535 ENUM
6536 BFD_RELOC_PRU_U16_PMEMIMM
6537 ENUMDOC
6538 PRU LDI 16-bit unsigned instruction-memory relocation.
6539 ENUM
6540 BFD_RELOC_PRU_LDI32
6541 ENUMDOC
6542 PRU relocation for two consecutive LDI load instructions that load a
6543 32 bit value into a register. If the higher bits are all zero, then
6544 the second instruction may be relaxed.
6545 ENUM
6546 BFD_RELOC_PRU_S10_PCREL
6547 ENUMDOC
6548 PRU QBBx 10-bit signed PC-relative relocation.
6549 ENUM
6550 BFD_RELOC_PRU_U8_PCREL
6551 ENUMDOC
6552 PRU 8-bit unsigned relocation used for the LOOP instruction.
6553 ENUM
6554 BFD_RELOC_PRU_32_PMEM
6555 ENUMX
6556 BFD_RELOC_PRU_16_PMEM
6557 ENUMDOC
6558 PRU Program Memory relocations. Used to convert from byte addressing to
6559 32-bit word addressing.
6560 ENUM
6561 BFD_RELOC_PRU_GNU_DIFF8
6562 ENUMX
6563 BFD_RELOC_PRU_GNU_DIFF16
6564 ENUMX
6565 BFD_RELOC_PRU_GNU_DIFF32
6566 ENUMX
6567 BFD_RELOC_PRU_GNU_DIFF16_PMEM
6568 ENUMX
6569 BFD_RELOC_PRU_GNU_DIFF32_PMEM
6570 ENUMDOC
6571 PRU relocations to mark the difference of two local symbols.
6572 These are only needed to support linker relaxation and can be ignored
6573 when not relaxing. The field is set to the value of the difference
6574 assuming no relaxation. The relocation encodes the position of the
6575 second symbol so the linker can determine whether to adjust the field
6576 value. The PMEM variants encode the word difference, instead of byte
6577 difference between symbols.
6578
6579 ENUM
6580 BFD_RELOC_IQ2000_OFFSET_16
6581 ENUMX
6582 BFD_RELOC_IQ2000_OFFSET_21
6583 ENUMX
6584 BFD_RELOC_IQ2000_UHI16
6585 ENUMDOC
6586 IQ2000 Relocations.
6587
6588 ENUM
6589 BFD_RELOC_XTENSA_RTLD
6590 ENUMDOC
6591 Special Xtensa relocation used only by PLT entries in ELF shared
6592 objects to indicate that the runtime linker should set the value
6593 to one of its own internal functions or data structures.
6594 ENUM
6595 BFD_RELOC_XTENSA_GLOB_DAT
6596 ENUMX
6597 BFD_RELOC_XTENSA_JMP_SLOT
6598 ENUMX
6599 BFD_RELOC_XTENSA_RELATIVE
6600 ENUMDOC
6601 Xtensa relocations for ELF shared objects.
6602 ENUM
6603 BFD_RELOC_XTENSA_PLT
6604 ENUMDOC
6605 Xtensa relocation used in ELF object files for symbols that may require
6606 PLT entries. Otherwise, this is just a generic 32-bit relocation.
6607 ENUM
6608 BFD_RELOC_XTENSA_DIFF8
6609 ENUMX
6610 BFD_RELOC_XTENSA_DIFF16
6611 ENUMX
6612 BFD_RELOC_XTENSA_DIFF32
6613 ENUMDOC
6614 Xtensa relocations to mark the difference of two local symbols.
6615 These are only needed to support linker relaxation and can be ignored
6616 when not relaxing. The field is set to the value of the difference
6617 assuming no relaxation. The relocation encodes the position of the
6618 first symbol so the linker can determine whether to adjust the field
6619 value.
6620 ENUM
6621 BFD_RELOC_XTENSA_SLOT0_OP
6622 ENUMX
6623 BFD_RELOC_XTENSA_SLOT1_OP
6624 ENUMX
6625 BFD_RELOC_XTENSA_SLOT2_OP
6626 ENUMX
6627 BFD_RELOC_XTENSA_SLOT3_OP
6628 ENUMX
6629 BFD_RELOC_XTENSA_SLOT4_OP
6630 ENUMX
6631 BFD_RELOC_XTENSA_SLOT5_OP
6632 ENUMX
6633 BFD_RELOC_XTENSA_SLOT6_OP
6634 ENUMX
6635 BFD_RELOC_XTENSA_SLOT7_OP
6636 ENUMX
6637 BFD_RELOC_XTENSA_SLOT8_OP
6638 ENUMX
6639 BFD_RELOC_XTENSA_SLOT9_OP
6640 ENUMX
6641 BFD_RELOC_XTENSA_SLOT10_OP
6642 ENUMX
6643 BFD_RELOC_XTENSA_SLOT11_OP
6644 ENUMX
6645 BFD_RELOC_XTENSA_SLOT12_OP
6646 ENUMX
6647 BFD_RELOC_XTENSA_SLOT13_OP
6648 ENUMX
6649 BFD_RELOC_XTENSA_SLOT14_OP
6650 ENUMDOC
6651 Generic Xtensa relocations for instruction operands. Only the slot
6652 number is encoded in the relocation. The relocation applies to the
6653 last PC-relative immediate operand, or if there are no PC-relative
6654 immediates, to the last immediate operand.
6655 ENUM
6656 BFD_RELOC_XTENSA_SLOT0_ALT
6657 ENUMX
6658 BFD_RELOC_XTENSA_SLOT1_ALT
6659 ENUMX
6660 BFD_RELOC_XTENSA_SLOT2_ALT
6661 ENUMX
6662 BFD_RELOC_XTENSA_SLOT3_ALT
6663 ENUMX
6664 BFD_RELOC_XTENSA_SLOT4_ALT
6665 ENUMX
6666 BFD_RELOC_XTENSA_SLOT5_ALT
6667 ENUMX
6668 BFD_RELOC_XTENSA_SLOT6_ALT
6669 ENUMX
6670 BFD_RELOC_XTENSA_SLOT7_ALT
6671 ENUMX
6672 BFD_RELOC_XTENSA_SLOT8_ALT
6673 ENUMX
6674 BFD_RELOC_XTENSA_SLOT9_ALT
6675 ENUMX
6676 BFD_RELOC_XTENSA_SLOT10_ALT
6677 ENUMX
6678 BFD_RELOC_XTENSA_SLOT11_ALT
6679 ENUMX
6680 BFD_RELOC_XTENSA_SLOT12_ALT
6681 ENUMX
6682 BFD_RELOC_XTENSA_SLOT13_ALT
6683 ENUMX
6684 BFD_RELOC_XTENSA_SLOT14_ALT
6685 ENUMDOC
6686 Alternate Xtensa relocations. Only the slot is encoded in the
6687 relocation. The meaning of these relocations is opcode-specific.
6688 ENUM
6689 BFD_RELOC_XTENSA_OP0
6690 ENUMX
6691 BFD_RELOC_XTENSA_OP1
6692 ENUMX
6693 BFD_RELOC_XTENSA_OP2
6694 ENUMDOC
6695 Xtensa relocations for backward compatibility. These have all been
6696 replaced by BFD_RELOC_XTENSA_SLOT0_OP.
6697 ENUM
6698 BFD_RELOC_XTENSA_ASM_EXPAND
6699 ENUMDOC
6700 Xtensa relocation to mark that the assembler expanded the
6701 instructions from an original target. The expansion size is
6702 encoded in the reloc size.
6703 ENUM
6704 BFD_RELOC_XTENSA_ASM_SIMPLIFY
6705 ENUMDOC
6706 Xtensa relocation to mark that the linker should simplify
6707 assembler-expanded instructions. This is commonly used
6708 internally by the linker after analysis of a
6709 BFD_RELOC_XTENSA_ASM_EXPAND.
6710 ENUM
6711 BFD_RELOC_XTENSA_TLSDESC_FN
6712 ENUMX
6713 BFD_RELOC_XTENSA_TLSDESC_ARG
6714 ENUMX
6715 BFD_RELOC_XTENSA_TLS_DTPOFF
6716 ENUMX
6717 BFD_RELOC_XTENSA_TLS_TPOFF
6718 ENUMX
6719 BFD_RELOC_XTENSA_TLS_FUNC
6720 ENUMX
6721 BFD_RELOC_XTENSA_TLS_ARG
6722 ENUMX
6723 BFD_RELOC_XTENSA_TLS_CALL
6724 ENUMDOC
6725 Xtensa TLS relocations.
6726
6727 ENUM
6728 BFD_RELOC_Z80_DISP8
6729 ENUMDOC
6730 8 bit signed offset in (ix+d) or (iy+d).
6731
6732 ENUM
6733 BFD_RELOC_Z8K_DISP7
6734 ENUMDOC
6735 DJNZ offset.
6736 ENUM
6737 BFD_RELOC_Z8K_CALLR
6738 ENUMDOC
6739 CALR offset.
6740 ENUM
6741 BFD_RELOC_Z8K_IMM4L
6742 ENUMDOC
6743 4 bit value.
6744
6745 ENUM
6746 BFD_RELOC_LM32_CALL
6747 ENUMX
6748 BFD_RELOC_LM32_BRANCH
6749 ENUMX
6750 BFD_RELOC_LM32_16_GOT
6751 ENUMX
6752 BFD_RELOC_LM32_GOTOFF_HI16
6753 ENUMX
6754 BFD_RELOC_LM32_GOTOFF_LO16
6755 ENUMX
6756 BFD_RELOC_LM32_COPY
6757 ENUMX
6758 BFD_RELOC_LM32_GLOB_DAT
6759 ENUMX
6760 BFD_RELOC_LM32_JMP_SLOT
6761 ENUMX
6762 BFD_RELOC_LM32_RELATIVE
6763 ENUMDOC
6764 Lattice Mico32 relocations.
6765
6766 ENUM
6767 BFD_RELOC_MACH_O_SECTDIFF
6768 ENUMDOC
6769 Difference between two section addreses. Must be followed by a
6770 BFD_RELOC_MACH_O_PAIR.
6771 ENUM
6772 BFD_RELOC_MACH_O_LOCAL_SECTDIFF
6773 ENUMDOC
6774 Like BFD_RELOC_MACH_O_SECTDIFF but with a local symbol.
6775 ENUM
6776 BFD_RELOC_MACH_O_PAIR
6777 ENUMDOC
6778 Pair of relocation. Contains the first symbol.
6779 ENUM
6780 BFD_RELOC_MACH_O_SUBTRACTOR32
6781 ENUMDOC
6782 Symbol will be substracted. Must be followed by a BFD_RELOC_32.
6783 ENUM
6784 BFD_RELOC_MACH_O_SUBTRACTOR64
6785 ENUMDOC
6786 Symbol will be substracted. Must be followed by a BFD_RELOC_64.
6787
6788 ENUM
6789 BFD_RELOC_MACH_O_X86_64_BRANCH32
6790 ENUMX
6791 BFD_RELOC_MACH_O_X86_64_BRANCH8
6792 ENUMDOC
6793 PCREL relocations. They are marked as branch to create PLT entry if
6794 required.
6795 ENUM
6796 BFD_RELOC_MACH_O_X86_64_GOT
6797 ENUMDOC
6798 Used when referencing a GOT entry.
6799 ENUM
6800 BFD_RELOC_MACH_O_X86_64_GOT_LOAD
6801 ENUMDOC
6802 Used when loading a GOT entry with movq. It is specially marked so that
6803 the linker could optimize the movq to a leaq if possible.
6804 ENUM
6805 BFD_RELOC_MACH_O_X86_64_PCREL32_1
6806 ENUMDOC
6807 Same as BFD_RELOC_32_PCREL but with an implicit -1 addend.
6808 ENUM
6809 BFD_RELOC_MACH_O_X86_64_PCREL32_2
6810 ENUMDOC
6811 Same as BFD_RELOC_32_PCREL but with an implicit -2 addend.
6812 ENUM
6813 BFD_RELOC_MACH_O_X86_64_PCREL32_4
6814 ENUMDOC
6815 Same as BFD_RELOC_32_PCREL but with an implicit -4 addend.
6816 ENUM
6817 BFD_RELOC_MACH_O_X86_64_TLV
6818 ENUMDOC
6819 Used when referencing a TLV entry.
6820
6821
6822 ENUM
6823 BFD_RELOC_MACH_O_ARM64_ADDEND
6824 ENUMDOC
6825 Addend for PAGE or PAGEOFF.
6826 ENUM
6827 BFD_RELOC_MACH_O_ARM64_GOT_LOAD_PAGE21
6828 ENUMDOC
6829 Relative offset to page of GOT slot.
6830 ENUM
6831 BFD_RELOC_MACH_O_ARM64_GOT_LOAD_PAGEOFF12
6832 ENUMDOC
6833 Relative offset within page of GOT slot.
6834 ENUM
6835 BFD_RELOC_MACH_O_ARM64_POINTER_TO_GOT
6836 ENUMDOC
6837 Address of a GOT entry.
6838
6839 ENUM
6840 BFD_RELOC_MICROBLAZE_32_LO
6841 ENUMDOC
6842 This is a 32 bit reloc for the microblaze that stores the
6843 low 16 bits of a value
6844 ENUM
6845 BFD_RELOC_MICROBLAZE_32_LO_PCREL
6846 ENUMDOC
6847 This is a 32 bit pc-relative reloc for the microblaze that
6848 stores the low 16 bits of a value
6849 ENUM
6850 BFD_RELOC_MICROBLAZE_32_ROSDA
6851 ENUMDOC
6852 This is a 32 bit reloc for the microblaze that stores a
6853 value relative to the read-only small data area anchor
6854 ENUM
6855 BFD_RELOC_MICROBLAZE_32_RWSDA
6856 ENUMDOC
6857 This is a 32 bit reloc for the microblaze that stores a
6858 value relative to the read-write small data area anchor
6859 ENUM
6860 BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM
6861 ENUMDOC
6862 This is a 32 bit reloc for the microblaze to handle
6863 expressions of the form "Symbol Op Symbol"
6864 ENUM
6865 BFD_RELOC_MICROBLAZE_64_NONE
6866 ENUMDOC
6867 This is a 64 bit reloc that stores the 32 bit pc relative
6868 value in two words (with an imm instruction). No relocation is
6869 done here - only used for relaxing
6870 ENUM
6871 BFD_RELOC_MICROBLAZE_64_GOTPC
6872 ENUMDOC
6873 This is a 64 bit reloc that stores the 32 bit pc relative
6874 value in two words (with an imm instruction). The relocation is
6875 PC-relative GOT offset
6876 ENUM
6877 BFD_RELOC_MICROBLAZE_64_GOT
6878 ENUMDOC
6879 This is a 64 bit reloc that stores the 32 bit pc relative
6880 value in two words (with an imm instruction). The relocation is
6881 GOT offset
6882 ENUM
6883 BFD_RELOC_MICROBLAZE_64_PLT
6884 ENUMDOC
6885 This is a 64 bit reloc that stores the 32 bit pc relative
6886 value in two words (with an imm instruction). The relocation is
6887 PC-relative offset into PLT
6888 ENUM
6889 BFD_RELOC_MICROBLAZE_64_GOTOFF
6890 ENUMDOC
6891 This is a 64 bit reloc that stores the 32 bit GOT relative
6892 value in two words (with an imm instruction). The relocation is
6893 relative offset from _GLOBAL_OFFSET_TABLE_
6894 ENUM
6895 BFD_RELOC_MICROBLAZE_32_GOTOFF
6896 ENUMDOC
6897 This is a 32 bit reloc that stores the 32 bit GOT relative
6898 value in a word. The relocation is relative offset from
6899 _GLOBAL_OFFSET_TABLE_
6900 ENUM
6901 BFD_RELOC_MICROBLAZE_COPY
6902 ENUMDOC
6903 This is used to tell the dynamic linker to copy the value out of
6904 the dynamic object into the runtime process image.
6905 ENUM
6906 BFD_RELOC_MICROBLAZE_64_TLS
6907 ENUMDOC
6908 Unused Reloc
6909 ENUM
6910 BFD_RELOC_MICROBLAZE_64_TLSGD
6911 ENUMDOC
6912 This is a 64 bit reloc that stores the 32 bit GOT relative value
6913 of the GOT TLS GD info entry in two words (with an imm instruction). The
6914 relocation is GOT offset.
6915 ENUM
6916 BFD_RELOC_MICROBLAZE_64_TLSLD
6917 ENUMDOC
6918 This is a 64 bit reloc that stores the 32 bit GOT relative value
6919 of the GOT TLS LD info entry in two words (with an imm instruction). The
6920 relocation is GOT offset.
6921 ENUM
6922 BFD_RELOC_MICROBLAZE_32_TLSDTPMOD
6923 ENUMDOC
6924 This is a 32 bit reloc that stores the Module ID to GOT(n).
6925 ENUM
6926 BFD_RELOC_MICROBLAZE_32_TLSDTPREL
6927 ENUMDOC
6928 This is a 32 bit reloc that stores TLS offset to GOT(n+1).
6929 ENUM
6930 BFD_RELOC_MICROBLAZE_64_TLSDTPREL
6931 ENUMDOC
6932 This is a 32 bit reloc for storing TLS offset to two words (uses imm
6933 instruction)
6934 ENUM
6935 BFD_RELOC_MICROBLAZE_64_TLSGOTTPREL
6936 ENUMDOC
6937 This is a 64 bit reloc that stores 32-bit thread pointer relative offset
6938 to two words (uses imm instruction).
6939 ENUM
6940 BFD_RELOC_MICROBLAZE_64_TLSTPREL
6941 ENUMDOC
6942 This is a 64 bit reloc that stores 32-bit thread pointer relative offset
6943 to two words (uses imm instruction).
6944 ENUM
6945 BFD_RELOC_MICROBLAZE_64_TEXTPCREL
6946 ENUMDOC
6947 This is a 64 bit reloc that stores the 32 bit pc relative
6948 value in two words (with an imm instruction). The relocation is
6949 PC-relative offset from start of TEXT.
6950 ENUM
6951 BFD_RELOC_MICROBLAZE_64_TEXTREL
6952 ENUMDOC
6953 This is a 64 bit reloc that stores the 32 bit offset
6954 value in two words (with an imm instruction). The relocation is
6955 relative offset from start of TEXT.
6956
6957 ENUM
6958 BFD_RELOC_AARCH64_RELOC_START
6959 ENUMDOC
6960 AArch64 pseudo relocation code to mark the start of the AArch64
6961 relocation enumerators. N.B. the order of the enumerators is
6962 important as several tables in the AArch64 bfd backend are indexed
6963 by these enumerators; make sure they are all synced.
6964 ENUM
6965 BFD_RELOC_AARCH64_NULL
6966 ENUMDOC
6967 Deprecated AArch64 null relocation code.
6968 ENUM
6969 BFD_RELOC_AARCH64_NONE
6970 ENUMDOC
6971 AArch64 null relocation code.
6972 ENUM
6973 BFD_RELOC_AARCH64_64
6974 ENUMX
6975 BFD_RELOC_AARCH64_32
6976 ENUMX
6977 BFD_RELOC_AARCH64_16
6978 ENUMDOC
6979 Basic absolute relocations of N bits. These are equivalent to
6980 BFD_RELOC_N and they were added to assist the indexing of the howto
6981 table.
6982 ENUM
6983 BFD_RELOC_AARCH64_64_PCREL
6984 ENUMX
6985 BFD_RELOC_AARCH64_32_PCREL
6986 ENUMX
6987 BFD_RELOC_AARCH64_16_PCREL
6988 ENUMDOC
6989 PC-relative relocations. These are equivalent to BFD_RELOC_N_PCREL
6990 and they were added to assist the indexing of the howto table.
6991 ENUM
6992 BFD_RELOC_AARCH64_MOVW_G0
6993 ENUMDOC
6994 AArch64 MOV[NZK] instruction with most significant bits 0 to 15
6995 of an unsigned address/value.
6996 ENUM
6997 BFD_RELOC_AARCH64_MOVW_G0_NC
6998 ENUMDOC
6999 AArch64 MOV[NZK] instruction with less significant bits 0 to 15 of
7000 an address/value. No overflow checking.
7001 ENUM
7002 BFD_RELOC_AARCH64_MOVW_G1
7003 ENUMDOC
7004 AArch64 MOV[NZK] instruction with most significant bits 16 to 31
7005 of an unsigned address/value.
7006 ENUM
7007 BFD_RELOC_AARCH64_MOVW_G1_NC
7008 ENUMDOC
7009 AArch64 MOV[NZK] instruction with less significant bits 16 to 31
7010 of an address/value. No overflow checking.
7011 ENUM
7012 BFD_RELOC_AARCH64_MOVW_G2
7013 ENUMDOC
7014 AArch64 MOV[NZK] instruction with most significant bits 32 to 47
7015 of an unsigned address/value.
7016 ENUM
7017 BFD_RELOC_AARCH64_MOVW_G2_NC
7018 ENUMDOC
7019 AArch64 MOV[NZK] instruction with less significant bits 32 to 47
7020 of an address/value. No overflow checking.
7021 ENUM
7022 BFD_RELOC_AARCH64_MOVW_G3
7023 ENUMDOC
7024 AArch64 MOV[NZK] instruction with most signficant bits 48 to 64
7025 of a signed or unsigned address/value.
7026 ENUM
7027 BFD_RELOC_AARCH64_MOVW_G0_S
7028 ENUMDOC
7029 AArch64 MOV[NZ] instruction with most significant bits 0 to 15
7030 of a signed value. Changes instruction to MOVZ or MOVN depending on the
7031 value's sign.
7032 ENUM
7033 BFD_RELOC_AARCH64_MOVW_G1_S
7034 ENUMDOC
7035 AArch64 MOV[NZ] instruction with most significant bits 16 to 31
7036 of a signed value. Changes instruction to MOVZ or MOVN depending on the
7037 value's sign.
7038 ENUM
7039 BFD_RELOC_AARCH64_MOVW_G2_S
7040 ENUMDOC
7041 AArch64 MOV[NZ] instruction with most significant bits 32 to 47
7042 of a signed value. Changes instruction to MOVZ or MOVN depending on the
7043 value's sign.
7044 ENUM
7045 BFD_RELOC_AARCH64_MOVW_PREL_G0
7046 ENUMDOC
7047 AArch64 MOV[NZ] instruction with most significant bits 0 to 15
7048 of a signed value. Changes instruction to MOVZ or MOVN depending on the
7049 value's sign.
7050 ENUM
7051 BFD_RELOC_AARCH64_MOVW_PREL_G0_NC
7052 ENUMDOC
7053 AArch64 MOV[NZ] instruction with most significant bits 0 to 15
7054 of a signed value. Changes instruction to MOVZ or MOVN depending on the
7055 value's sign.
7056 ENUM
7057 BFD_RELOC_AARCH64_MOVW_PREL_G1
7058 ENUMDOC
7059 AArch64 MOVK instruction with most significant bits 16 to 31
7060 of a signed value.
7061 ENUM
7062 BFD_RELOC_AARCH64_MOVW_PREL_G1_NC
7063 ENUMDOC
7064 AArch64 MOVK instruction with most significant bits 16 to 31
7065 of a signed value.
7066 ENUM
7067 BFD_RELOC_AARCH64_MOVW_PREL_G2
7068 ENUMDOC
7069 AArch64 MOVK instruction with most significant bits 32 to 47
7070 of a signed value.
7071 ENUM
7072 BFD_RELOC_AARCH64_MOVW_PREL_G2_NC
7073 ENUMDOC
7074 AArch64 MOVK instruction with most significant bits 32 to 47
7075 of a signed value.
7076 ENUM
7077 BFD_RELOC_AARCH64_MOVW_PREL_G3
7078 ENUMDOC
7079 AArch64 MOVK instruction with most significant bits 47 to 63
7080 of a signed value.
7081 ENUM
7082 BFD_RELOC_AARCH64_LD_LO19_PCREL
7083 ENUMDOC
7084 AArch64 Load Literal instruction, holding a 19 bit pc-relative word
7085 offset. The lowest two bits must be zero and are not stored in the
7086 instruction, giving a 21 bit signed byte offset.
7087 ENUM
7088 BFD_RELOC_AARCH64_ADR_LO21_PCREL
7089 ENUMDOC
7090 AArch64 ADR instruction, holding a simple 21 bit pc-relative byte offset.
7091 ENUM
7092 BFD_RELOC_AARCH64_ADR_HI21_PCREL
7093 ENUMDOC
7094 AArch64 ADRP instruction, with bits 12 to 32 of a pc-relative page
7095 offset, giving a 4KB aligned page base address.
7096 ENUM
7097 BFD_RELOC_AARCH64_ADR_HI21_NC_PCREL
7098 ENUMDOC
7099 AArch64 ADRP instruction, with bits 12 to 32 of a pc-relative page
7100 offset, giving a 4KB aligned page base address, but with no overflow
7101 checking.
7102 ENUM
7103 BFD_RELOC_AARCH64_ADD_LO12
7104 ENUMDOC
7105 AArch64 ADD immediate instruction, holding bits 0 to 11 of the address.
7106 Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
7107 ENUM
7108 BFD_RELOC_AARCH64_LDST8_LO12
7109 ENUMDOC
7110 AArch64 8-bit load/store instruction, holding bits 0 to 11 of the
7111 address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
7112 ENUM
7113 BFD_RELOC_AARCH64_TSTBR14
7114 ENUMDOC
7115 AArch64 14 bit pc-relative test bit and branch.
7116 The lowest two bits must be zero and are not stored in the instruction,
7117 giving a 16 bit signed byte offset.
7118 ENUM
7119 BFD_RELOC_AARCH64_BRANCH19
7120 ENUMDOC
7121 AArch64 19 bit pc-relative conditional branch and compare & branch.
7122 The lowest two bits must be zero and are not stored in the instruction,
7123 giving a 21 bit signed byte offset.
7124 ENUM
7125 BFD_RELOC_AARCH64_JUMP26
7126 ENUMDOC
7127 AArch64 26 bit pc-relative unconditional branch.
7128 The lowest two bits must be zero and are not stored in the instruction,
7129 giving a 28 bit signed byte offset.
7130 ENUM
7131 BFD_RELOC_AARCH64_CALL26
7132 ENUMDOC
7133 AArch64 26 bit pc-relative unconditional branch and link.
7134 The lowest two bits must be zero and are not stored in the instruction,
7135 giving a 28 bit signed byte offset.
7136 ENUM
7137 BFD_RELOC_AARCH64_LDST16_LO12
7138 ENUMDOC
7139 AArch64 16-bit load/store instruction, holding bits 0 to 11 of the
7140 address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
7141 ENUM
7142 BFD_RELOC_AARCH64_LDST32_LO12
7143 ENUMDOC
7144 AArch64 32-bit load/store instruction, holding bits 0 to 11 of the
7145 address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
7146 ENUM
7147 BFD_RELOC_AARCH64_LDST64_LO12
7148 ENUMDOC
7149 AArch64 64-bit load/store instruction, holding bits 0 to 11 of the
7150 address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
7151 ENUM
7152 BFD_RELOC_AARCH64_LDST128_LO12
7153 ENUMDOC
7154 AArch64 128-bit load/store instruction, holding bits 0 to 11 of the
7155 address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
7156 ENUM
7157 BFD_RELOC_AARCH64_GOT_LD_PREL19
7158 ENUMDOC
7159 AArch64 Load Literal instruction, holding a 19 bit PC relative word
7160 offset of the global offset table entry for a symbol. The lowest two
7161 bits must be zero and are not stored in the instruction, giving a 21
7162 bit signed byte offset. This relocation type requires signed overflow
7163 checking.
7164 ENUM
7165 BFD_RELOC_AARCH64_ADR_GOT_PAGE
7166 ENUMDOC
7167 Get to the page base of the global offset table entry for a symbol as
7168 part of an ADRP instruction using a 21 bit PC relative value.Used in
7169 conjunction with BFD_RELOC_AARCH64_LD64_GOT_LO12_NC.
7170 ENUM
7171 BFD_RELOC_AARCH64_LD64_GOT_LO12_NC
7172 ENUMDOC
7173 Unsigned 12 bit byte offset for 64 bit load/store from the page of
7174 the GOT entry for this symbol. Used in conjunction with
7175 BFD_RELOC_AARCH64_ADR_GOT_PAGE. Valid in LP64 ABI only.
7176 ENUM
7177 BFD_RELOC_AARCH64_LD32_GOT_LO12_NC
7178 ENUMDOC
7179 Unsigned 12 bit byte offset for 32 bit load/store from the page of
7180 the GOT entry for this symbol. Used in conjunction with
7181 BFD_RELOC_AARCH64_ADR_GOT_PAGE. Valid in ILP32 ABI only.
7182 ENUM
7183 BFD_RELOC_AARCH64_MOVW_GOTOFF_G0_NC
7184 ENUMDOC
7185 Unsigned 16 bit byte offset for 64 bit load/store from the GOT entry
7186 for this symbol. Valid in LP64 ABI only.
7187 ENUM
7188 BFD_RELOC_AARCH64_MOVW_GOTOFF_G1
7189 ENUMDOC
7190 Unsigned 16 bit byte higher offset for 64 bit load/store from the GOT entry
7191 for this symbol. Valid in LP64 ABI only.
7192 ENUM
7193 BFD_RELOC_AARCH64_LD64_GOTOFF_LO15
7194 ENUMDOC
7195 Unsigned 15 bit byte offset for 64 bit load/store from the page of
7196 the GOT entry for this symbol. Valid in LP64 ABI only.
7197 ENUM
7198 BFD_RELOC_AARCH64_LD32_GOTPAGE_LO14
7199 ENUMDOC
7200 Scaled 14 bit byte offset to the page base of the global offset table.
7201 ENUM
7202 BFD_RELOC_AARCH64_LD64_GOTPAGE_LO15
7203 ENUMDOC
7204 Scaled 15 bit byte offset to the page base of the global offset table.
7205 ENUM
7206 BFD_RELOC_AARCH64_TLSGD_ADR_PAGE21
7207 ENUMDOC
7208 Get to the page base of the global offset table entry for a symbols
7209 tls_index structure as part of an adrp instruction using a 21 bit PC
7210 relative value. Used in conjunction with
7211 BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC.
7212 ENUM
7213 BFD_RELOC_AARCH64_TLSGD_ADR_PREL21
7214 ENUMDOC
7215 AArch64 TLS General Dynamic
7216 ENUM
7217 BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC
7218 ENUMDOC
7219 Unsigned 12 bit byte offset to global offset table entry for a symbols
7220 tls_index structure. Used in conjunction with
7221 BFD_RELOC_AARCH64_TLSGD_ADR_PAGE21.
7222 ENUM
7223 BFD_RELOC_AARCH64_TLSGD_MOVW_G0_NC
7224 ENUMDOC
7225 AArch64 TLS General Dynamic relocation.
7226 ENUM
7227 BFD_RELOC_AARCH64_TLSGD_MOVW_G1
7228 ENUMDOC
7229 AArch64 TLS General Dynamic relocation.
7230 ENUM
7231 BFD_RELOC_AARCH64_TLSIE_ADR_GOTTPREL_PAGE21
7232 ENUMDOC
7233 AArch64 TLS INITIAL EXEC relocation.
7234 ENUM
7235 BFD_RELOC_AARCH64_TLSIE_LD64_GOTTPREL_LO12_NC
7236 ENUMDOC
7237 AArch64 TLS INITIAL EXEC relocation.
7238 ENUM
7239 BFD_RELOC_AARCH64_TLSIE_LD32_GOTTPREL_LO12_NC
7240 ENUMDOC
7241 AArch64 TLS INITIAL EXEC relocation.
7242 ENUM
7243 BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_PREL19
7244 ENUMDOC
7245 AArch64 TLS INITIAL EXEC relocation.
7246 ENUM
7247 BFD_RELOC_AARCH64_TLSIE_MOVW_GOTTPREL_G0_NC
7248 ENUMDOC
7249 AArch64 TLS INITIAL EXEC relocation.
7250 ENUM
7251 BFD_RELOC_AARCH64_TLSIE_MOVW_GOTTPREL_G1
7252 ENUMDOC
7253 AArch64 TLS INITIAL EXEC relocation.
7254 ENUM
7255 BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_HI12
7256 ENUMDOC
7257 bit[23:12] of byte offset to module TLS base address.
7258 ENUM
7259 BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12
7260 ENUMDOC
7261 Unsigned 12 bit byte offset to module TLS base address.
7262 ENUM
7263 BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12_NC
7264 ENUMDOC
7265 No overflow check version of BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12.
7266 ENUM
7267 BFD_RELOC_AARCH64_TLSLD_ADD_LO12_NC
7268 ENUMDOC
7269 Unsigned 12 bit byte offset to global offset table entry for a symbols
7270 tls_index structure. Used in conjunction with
7271 BFD_RELOC_AARCH64_TLSLD_ADR_PAGE21.
7272 ENUM
7273 BFD_RELOC_AARCH64_TLSLD_ADR_PAGE21
7274 ENUMDOC
7275 GOT entry page address for AArch64 TLS Local Dynamic, used with ADRP
7276 instruction.
7277 ENUM
7278 BFD_RELOC_AARCH64_TLSLD_ADR_PREL21
7279 ENUMDOC
7280 GOT entry address for AArch64 TLS Local Dynamic, used with ADR instruction.
7281 ENUM
7282 BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12
7283 ENUMDOC
7284 bit[11:1] of byte offset to module TLS base address, encoded in ldst
7285 instructions.
7286 ENUM
7287 BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12_NC
7288 ENUMDOC
7289 Similar as BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12, but no overflow check.
7290 ENUM
7291 BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12
7292 ENUMDOC
7293 bit[11:2] of byte offset to module TLS base address, encoded in ldst
7294 instructions.
7295 ENUM
7296 BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12_NC
7297 ENUMDOC
7298 Similar as BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12, but no overflow check.
7299 ENUM
7300 BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12
7301 ENUMDOC
7302 bit[11:3] of byte offset to module TLS base address, encoded in ldst
7303 instructions.
7304 ENUM
7305 BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12_NC
7306 ENUMDOC
7307 Similar as BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12, but no overflow check.
7308 ENUM
7309 BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12
7310 ENUMDOC
7311 bit[11:0] of byte offset to module TLS base address, encoded in ldst
7312 instructions.
7313 ENUM
7314 BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12_NC
7315 ENUMDOC
7316 Similar as BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12, but no overflow check.
7317 ENUM
7318 BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G0
7319 ENUMDOC
7320 bit[15:0] of byte offset to module TLS base address.
7321 ENUM
7322 BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G0_NC
7323 ENUMDOC
7324 No overflow check version of BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G0
7325 ENUM
7326 BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G1
7327 ENUMDOC
7328 bit[31:16] of byte offset to module TLS base address.
7329 ENUM
7330 BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G1_NC
7331 ENUMDOC
7332 No overflow check version of BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G1
7333 ENUM
7334 BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G2
7335 ENUMDOC
7336 bit[47:32] of byte offset to module TLS base address.
7337 ENUM
7338 BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G2
7339 ENUMDOC
7340 AArch64 TLS LOCAL EXEC relocation.
7341 ENUM
7342 BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G1
7343 ENUMDOC
7344 AArch64 TLS LOCAL EXEC relocation.
7345 ENUM
7346 BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G1_NC
7347 ENUMDOC
7348 AArch64 TLS LOCAL EXEC relocation.
7349 ENUM
7350 BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G0
7351 ENUMDOC
7352 AArch64 TLS LOCAL EXEC relocation.
7353 ENUM
7354 BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G0_NC
7355 ENUMDOC
7356 AArch64 TLS LOCAL EXEC relocation.
7357 ENUM
7358 BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_HI12
7359 ENUMDOC
7360 AArch64 TLS LOCAL EXEC relocation.
7361 ENUM
7362 BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_LO12
7363 ENUMDOC
7364 AArch64 TLS LOCAL EXEC relocation.
7365 ENUM
7366 BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_LO12_NC
7367 ENUMDOC
7368 AArch64 TLS LOCAL EXEC relocation.
7369 ENUM
7370 BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12
7371 ENUMDOC
7372 bit[11:1] of byte offset to module TLS base address, encoded in ldst
7373 instructions.
7374 ENUM
7375 BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12_NC
7376 ENUMDOC
7377 Similar as BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12, but no overflow check.
7378 ENUM
7379 BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12
7380 ENUMDOC
7381 bit[11:2] of byte offset to module TLS base address, encoded in ldst
7382 instructions.
7383 ENUM
7384 BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12_NC
7385 ENUMDOC
7386 Similar as BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12, but no overflow check.
7387 ENUM
7388 BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12
7389 ENUMDOC
7390 bit[11:3] of byte offset to module TLS base address, encoded in ldst
7391 instructions.
7392 ENUM
7393 BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12_NC
7394 ENUMDOC
7395 Similar as BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12, but no overflow check.
7396 ENUM
7397 BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12
7398 ENUMDOC
7399 bit[11:0] of byte offset to module TLS base address, encoded in ldst
7400 instructions.
7401 ENUM
7402 BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12_NC
7403 ENUMDOC
7404 Similar as BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12, but no overflow check.
7405 ENUM
7406 BFD_RELOC_AARCH64_TLSDESC_LD_PREL19
7407 ENUMDOC
7408 AArch64 TLS DESC relocation.
7409 ENUM
7410 BFD_RELOC_AARCH64_TLSDESC_ADR_PREL21
7411 ENUMDOC
7412 AArch64 TLS DESC relocation.
7413 ENUM
7414 BFD_RELOC_AARCH64_TLSDESC_ADR_PAGE21
7415 ENUMDOC
7416 AArch64 TLS DESC relocation.
7417 ENUM
7418 BFD_RELOC_AARCH64_TLSDESC_LD64_LO12
7419 ENUMDOC
7420 AArch64 TLS DESC relocation.
7421 ENUM
7422 BFD_RELOC_AARCH64_TLSDESC_LD32_LO12_NC
7423 ENUMDOC
7424 AArch64 TLS DESC relocation.
7425 ENUM
7426 BFD_RELOC_AARCH64_TLSDESC_ADD_LO12
7427 ENUMDOC
7428 AArch64 TLS DESC relocation.
7429 ENUM
7430 BFD_RELOC_AARCH64_TLSDESC_OFF_G1
7431 ENUMDOC
7432 AArch64 TLS DESC relocation.
7433 ENUM
7434 BFD_RELOC_AARCH64_TLSDESC_OFF_G0_NC
7435 ENUMDOC
7436 AArch64 TLS DESC relocation.
7437 ENUM
7438 BFD_RELOC_AARCH64_TLSDESC_LDR
7439 ENUMDOC
7440 AArch64 TLS DESC relocation.
7441 ENUM
7442 BFD_RELOC_AARCH64_TLSDESC_ADD
7443 ENUMDOC
7444 AArch64 TLS DESC relocation.
7445 ENUM
7446 BFD_RELOC_AARCH64_TLSDESC_CALL
7447 ENUMDOC
7448 AArch64 TLS DESC relocation.
7449 ENUM
7450 BFD_RELOC_AARCH64_COPY
7451 ENUMDOC
7452 AArch64 TLS relocation.
7453 ENUM
7454 BFD_RELOC_AARCH64_GLOB_DAT
7455 ENUMDOC
7456 AArch64 TLS relocation.
7457 ENUM
7458 BFD_RELOC_AARCH64_JUMP_SLOT
7459 ENUMDOC
7460 AArch64 TLS relocation.
7461 ENUM
7462 BFD_RELOC_AARCH64_RELATIVE
7463 ENUMDOC
7464 AArch64 TLS relocation.
7465 ENUM
7466 BFD_RELOC_AARCH64_TLS_DTPMOD
7467 ENUMDOC
7468 AArch64 TLS relocation.
7469 ENUM
7470 BFD_RELOC_AARCH64_TLS_DTPREL
7471 ENUMDOC
7472 AArch64 TLS relocation.
7473 ENUM
7474 BFD_RELOC_AARCH64_TLS_TPREL
7475 ENUMDOC
7476 AArch64 TLS relocation.
7477 ENUM
7478 BFD_RELOC_AARCH64_TLSDESC
7479 ENUMDOC
7480 AArch64 TLS relocation.
7481 ENUM
7482 BFD_RELOC_AARCH64_IRELATIVE
7483 ENUMDOC
7484 AArch64 support for STT_GNU_IFUNC.
7485 ENUM
7486 BFD_RELOC_AARCH64_RELOC_END
7487 ENUMDOC
7488 AArch64 pseudo relocation code to mark the end of the AArch64
7489 relocation enumerators that have direct mapping to ELF reloc codes.
7490 There are a few more enumerators after this one; those are mainly
7491 used by the AArch64 assembler for the internal fixup or to select
7492 one of the above enumerators.
7493 ENUM
7494 BFD_RELOC_AARCH64_GAS_INTERNAL_FIXUP
7495 ENUMDOC
7496 AArch64 pseudo relocation code to be used internally by the AArch64
7497 assembler and not (currently) written to any object files.
7498 ENUM
7499 BFD_RELOC_AARCH64_LDST_LO12
7500 ENUMDOC
7501 AArch64 unspecified load/store instruction, holding bits 0 to 11 of the
7502 address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
7503 ENUM
7504 BFD_RELOC_AARCH64_TLSLD_LDST_DTPREL_LO12
7505 ENUMDOC
7506 AArch64 pseudo relocation code for TLS local dynamic mode. It's to be
7507 used internally by the AArch64 assembler and not (currently) written to
7508 any object files.
7509 ENUM
7510 BFD_RELOC_AARCH64_TLSLD_LDST_DTPREL_LO12_NC
7511 ENUMDOC
7512 Similar as BFD_RELOC_AARCH64_TLSLD_LDST_DTPREL_LO12, but no overflow check.
7513 ENUM
7514 BFD_RELOC_AARCH64_TLSLE_LDST_TPREL_LO12
7515 ENUMDOC
7516 AArch64 pseudo relocation code for TLS local exec mode. It's to be
7517 used internally by the AArch64 assembler and not (currently) written to
7518 any object files.
7519 ENUM
7520 BFD_RELOC_AARCH64_TLSLE_LDST_TPREL_LO12_NC
7521 ENUMDOC
7522 Similar as BFD_RELOC_AARCH64_TLSLE_LDST_TPREL_LO12, but no overflow check.
7523 ENUM
7524 BFD_RELOC_AARCH64_LD_GOT_LO12_NC
7525 ENUMDOC
7526 AArch64 pseudo relocation code to be used internally by the AArch64
7527 assembler and not (currently) written to any object files.
7528 ENUM
7529 BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_LO12_NC
7530 ENUMDOC
7531 AArch64 pseudo relocation code to be used internally by the AArch64
7532 assembler and not (currently) written to any object files.
7533 ENUM
7534 BFD_RELOC_AARCH64_TLSDESC_LD_LO12_NC
7535 ENUMDOC
7536 AArch64 pseudo relocation code to be used internally by the AArch64
7537 assembler and not (currently) written to any object files.
7538 ENUM
7539 BFD_RELOC_TILEPRO_COPY
7540 ENUMX
7541 BFD_RELOC_TILEPRO_GLOB_DAT
7542 ENUMX
7543 BFD_RELOC_TILEPRO_JMP_SLOT
7544 ENUMX
7545 BFD_RELOC_TILEPRO_RELATIVE
7546 ENUMX
7547 BFD_RELOC_TILEPRO_BROFF_X1
7548 ENUMX
7549 BFD_RELOC_TILEPRO_JOFFLONG_X1
7550 ENUMX
7551 BFD_RELOC_TILEPRO_JOFFLONG_X1_PLT
7552 ENUMX
7553 BFD_RELOC_TILEPRO_IMM8_X0
7554 ENUMX
7555 BFD_RELOC_TILEPRO_IMM8_Y0
7556 ENUMX
7557 BFD_RELOC_TILEPRO_IMM8_X1
7558 ENUMX
7559 BFD_RELOC_TILEPRO_IMM8_Y1
7560 ENUMX
7561 BFD_RELOC_TILEPRO_DEST_IMM8_X1
7562 ENUMX
7563 BFD_RELOC_TILEPRO_MT_IMM15_X1
7564 ENUMX
7565 BFD_RELOC_TILEPRO_MF_IMM15_X1
7566 ENUMX
7567 BFD_RELOC_TILEPRO_IMM16_X0
7568 ENUMX
7569 BFD_RELOC_TILEPRO_IMM16_X1
7570 ENUMX
7571 BFD_RELOC_TILEPRO_IMM16_X0_LO
7572 ENUMX
7573 BFD_RELOC_TILEPRO_IMM16_X1_LO
7574 ENUMX
7575 BFD_RELOC_TILEPRO_IMM16_X0_HI
7576 ENUMX
7577 BFD_RELOC_TILEPRO_IMM16_X1_HI
7578 ENUMX
7579 BFD_RELOC_TILEPRO_IMM16_X0_HA
7580 ENUMX
7581 BFD_RELOC_TILEPRO_IMM16_X1_HA
7582 ENUMX
7583 BFD_RELOC_TILEPRO_IMM16_X0_PCREL
7584 ENUMX
7585 BFD_RELOC_TILEPRO_IMM16_X1_PCREL
7586 ENUMX
7587 BFD_RELOC_TILEPRO_IMM16_X0_LO_PCREL
7588 ENUMX
7589 BFD_RELOC_TILEPRO_IMM16_X1_LO_PCREL
7590 ENUMX
7591 BFD_RELOC_TILEPRO_IMM16_X0_HI_PCREL
7592 ENUMX
7593 BFD_RELOC_TILEPRO_IMM16_X1_HI_PCREL
7594 ENUMX
7595 BFD_RELOC_TILEPRO_IMM16_X0_HA_PCREL
7596 ENUMX
7597 BFD_RELOC_TILEPRO_IMM16_X1_HA_PCREL
7598 ENUMX
7599 BFD_RELOC_TILEPRO_IMM16_X0_GOT
7600 ENUMX
7601 BFD_RELOC_TILEPRO_IMM16_X1_GOT
7602 ENUMX
7603 BFD_RELOC_TILEPRO_IMM16_X0_GOT_LO
7604 ENUMX
7605 BFD_RELOC_TILEPRO_IMM16_X1_GOT_LO
7606 ENUMX
7607 BFD_RELOC_TILEPRO_IMM16_X0_GOT_HI
7608 ENUMX
7609 BFD_RELOC_TILEPRO_IMM16_X1_GOT_HI
7610 ENUMX
7611 BFD_RELOC_TILEPRO_IMM16_X0_GOT_HA
7612 ENUMX
7613 BFD_RELOC_TILEPRO_IMM16_X1_GOT_HA
7614 ENUMX
7615 BFD_RELOC_TILEPRO_MMSTART_X0
7616 ENUMX
7617 BFD_RELOC_TILEPRO_MMEND_X0
7618 ENUMX
7619 BFD_RELOC_TILEPRO_MMSTART_X1
7620 ENUMX
7621 BFD_RELOC_TILEPRO_MMEND_X1
7622 ENUMX
7623 BFD_RELOC_TILEPRO_SHAMT_X0
7624 ENUMX
7625 BFD_RELOC_TILEPRO_SHAMT_X1
7626 ENUMX
7627 BFD_RELOC_TILEPRO_SHAMT_Y0
7628 ENUMX
7629 BFD_RELOC_TILEPRO_SHAMT_Y1
7630 ENUMX
7631 BFD_RELOC_TILEPRO_TLS_GD_CALL
7632 ENUMX
7633 BFD_RELOC_TILEPRO_IMM8_X0_TLS_GD_ADD
7634 ENUMX
7635 BFD_RELOC_TILEPRO_IMM8_X1_TLS_GD_ADD
7636 ENUMX
7637 BFD_RELOC_TILEPRO_IMM8_Y0_TLS_GD_ADD
7638 ENUMX
7639 BFD_RELOC_TILEPRO_IMM8_Y1_TLS_GD_ADD
7640 ENUMX
7641 BFD_RELOC_TILEPRO_TLS_IE_LOAD
7642 ENUMX
7643 BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD
7644 ENUMX
7645 BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD
7646 ENUMX
7647 BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_LO
7648 ENUMX
7649 BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_LO
7650 ENUMX
7651 BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_HI
7652 ENUMX
7653 BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_HI
7654 ENUMX
7655 BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_HA
7656 ENUMX
7657 BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_HA
7658 ENUMX
7659 BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE
7660 ENUMX
7661 BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE
7662 ENUMX
7663 BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_LO
7664 ENUMX
7665 BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_LO
7666 ENUMX
7667 BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_HI
7668 ENUMX
7669 BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_HI
7670 ENUMX
7671 BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_HA
7672 ENUMX
7673 BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_HA
7674 ENUMX
7675 BFD_RELOC_TILEPRO_TLS_DTPMOD32
7676 ENUMX
7677 BFD_RELOC_TILEPRO_TLS_DTPOFF32
7678 ENUMX
7679 BFD_RELOC_TILEPRO_TLS_TPOFF32
7680 ENUMX
7681 BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE
7682 ENUMX
7683 BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE
7684 ENUMX
7685 BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_LO
7686 ENUMX
7687 BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_LO
7688 ENUMX
7689 BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_HI
7690 ENUMX
7691 BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_HI
7692 ENUMX
7693 BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_HA
7694 ENUMX
7695 BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_HA
7696 ENUMDOC
7697 Tilera TILEPro Relocations.
7698 ENUM
7699 BFD_RELOC_TILEGX_HW0
7700 ENUMX
7701 BFD_RELOC_TILEGX_HW1
7702 ENUMX
7703 BFD_RELOC_TILEGX_HW2
7704 ENUMX
7705 BFD_RELOC_TILEGX_HW3
7706 ENUMX
7707 BFD_RELOC_TILEGX_HW0_LAST
7708 ENUMX
7709 BFD_RELOC_TILEGX_HW1_LAST
7710 ENUMX
7711 BFD_RELOC_TILEGX_HW2_LAST
7712 ENUMX
7713 BFD_RELOC_TILEGX_COPY
7714 ENUMX
7715 BFD_RELOC_TILEGX_GLOB_DAT
7716 ENUMX
7717 BFD_RELOC_TILEGX_JMP_SLOT
7718 ENUMX
7719 BFD_RELOC_TILEGX_RELATIVE
7720 ENUMX
7721 BFD_RELOC_TILEGX_BROFF_X1
7722 ENUMX
7723 BFD_RELOC_TILEGX_JUMPOFF_X1
7724 ENUMX
7725 BFD_RELOC_TILEGX_JUMPOFF_X1_PLT
7726 ENUMX
7727 BFD_RELOC_TILEGX_IMM8_X0
7728 ENUMX
7729 BFD_RELOC_TILEGX_IMM8_Y0
7730 ENUMX
7731 BFD_RELOC_TILEGX_IMM8_X1
7732 ENUMX
7733 BFD_RELOC_TILEGX_IMM8_Y1
7734 ENUMX
7735 BFD_RELOC_TILEGX_DEST_IMM8_X1
7736 ENUMX
7737 BFD_RELOC_TILEGX_MT_IMM14_X1
7738 ENUMX
7739 BFD_RELOC_TILEGX_MF_IMM14_X1
7740 ENUMX
7741 BFD_RELOC_TILEGX_MMSTART_X0
7742 ENUMX
7743 BFD_RELOC_TILEGX_MMEND_X0
7744 ENUMX
7745 BFD_RELOC_TILEGX_SHAMT_X0
7746 ENUMX
7747 BFD_RELOC_TILEGX_SHAMT_X1
7748 ENUMX
7749 BFD_RELOC_TILEGX_SHAMT_Y0
7750 ENUMX
7751 BFD_RELOC_TILEGX_SHAMT_Y1
7752 ENUMX
7753 BFD_RELOC_TILEGX_IMM16_X0_HW0
7754 ENUMX
7755 BFD_RELOC_TILEGX_IMM16_X1_HW0
7756 ENUMX
7757 BFD_RELOC_TILEGX_IMM16_X0_HW1
7758 ENUMX
7759 BFD_RELOC_TILEGX_IMM16_X1_HW1
7760 ENUMX
7761 BFD_RELOC_TILEGX_IMM16_X0_HW2
7762 ENUMX
7763 BFD_RELOC_TILEGX_IMM16_X1_HW2
7764 ENUMX
7765 BFD_RELOC_TILEGX_IMM16_X0_HW3
7766 ENUMX
7767 BFD_RELOC_TILEGX_IMM16_X1_HW3
7768 ENUMX
7769 BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST
7770 ENUMX
7771 BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST
7772 ENUMX
7773 BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST
7774 ENUMX
7775 BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST
7776 ENUMX
7777 BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST
7778 ENUMX
7779 BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST
7780 ENUMX
7781 BFD_RELOC_TILEGX_IMM16_X0_HW0_PCREL
7782 ENUMX
7783 BFD_RELOC_TILEGX_IMM16_X1_HW0_PCREL
7784 ENUMX
7785 BFD_RELOC_TILEGX_IMM16_X0_HW1_PCREL
7786 ENUMX
7787 BFD_RELOC_TILEGX_IMM16_X1_HW1_PCREL
7788 ENUMX
7789 BFD_RELOC_TILEGX_IMM16_X0_HW2_PCREL
7790 ENUMX
7791 BFD_RELOC_TILEGX_IMM16_X1_HW2_PCREL
7792 ENUMX
7793 BFD_RELOC_TILEGX_IMM16_X0_HW3_PCREL
7794 ENUMX
7795 BFD_RELOC_TILEGX_IMM16_X1_HW3_PCREL
7796 ENUMX
7797 BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_PCREL
7798 ENUMX
7799 BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_PCREL
7800 ENUMX
7801 BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_PCREL
7802 ENUMX
7803 BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_PCREL
7804 ENUMX
7805 BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST_PCREL
7806 ENUMX
7807 BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST_PCREL
7808 ENUMX
7809 BFD_RELOC_TILEGX_IMM16_X0_HW0_GOT
7810 ENUMX
7811 BFD_RELOC_TILEGX_IMM16_X1_HW0_GOT
7812 ENUMX
7813 BFD_RELOC_TILEGX_IMM16_X0_HW0_PLT_PCREL
7814 ENUMX
7815 BFD_RELOC_TILEGX_IMM16_X1_HW0_PLT_PCREL
7816 ENUMX
7817 BFD_RELOC_TILEGX_IMM16_X0_HW1_PLT_PCREL
7818 ENUMX
7819 BFD_RELOC_TILEGX_IMM16_X1_HW1_PLT_PCREL
7820 ENUMX
7821 BFD_RELOC_TILEGX_IMM16_X0_HW2_PLT_PCREL
7822 ENUMX
7823 BFD_RELOC_TILEGX_IMM16_X1_HW2_PLT_PCREL
7824 ENUMX
7825 BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_GOT
7826 ENUMX
7827 BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_GOT
7828 ENUMX
7829 BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_GOT
7830 ENUMX
7831 BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_GOT
7832 ENUMX
7833 BFD_RELOC_TILEGX_IMM16_X0_HW3_PLT_PCREL
7834 ENUMX
7835 BFD_RELOC_TILEGX_IMM16_X1_HW3_PLT_PCREL
7836 ENUMX
7837 BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_GD
7838 ENUMX
7839 BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_GD
7840 ENUMX
7841 BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_LE
7842 ENUMX
7843 BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_LE
7844 ENUMX
7845 BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_LE
7846 ENUMX
7847 BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_LE
7848 ENUMX
7849 BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_LE
7850 ENUMX
7851 BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_LE
7852 ENUMX
7853 BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_GD
7854 ENUMX
7855 BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_GD
7856 ENUMX
7857 BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_GD
7858 ENUMX
7859 BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_GD
7860 ENUMX
7861 BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_IE
7862 ENUMX
7863 BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_IE
7864 ENUMX
7865 BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_PLT_PCREL
7866 ENUMX
7867 BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_PLT_PCREL
7868 ENUMX
7869 BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_PLT_PCREL
7870 ENUMX
7871 BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_PLT_PCREL
7872 ENUMX
7873 BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST_PLT_PCREL
7874 ENUMX
7875 BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST_PLT_PCREL
7876 ENUMX
7877 BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_IE
7878 ENUMX
7879 BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_IE
7880 ENUMX
7881 BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_IE
7882 ENUMX
7883 BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_IE
7884 ENUMX
7885 BFD_RELOC_TILEGX_TLS_DTPMOD64
7886 ENUMX
7887 BFD_RELOC_TILEGX_TLS_DTPOFF64
7888 ENUMX
7889 BFD_RELOC_TILEGX_TLS_TPOFF64
7890 ENUMX
7891 BFD_RELOC_TILEGX_TLS_DTPMOD32
7892 ENUMX
7893 BFD_RELOC_TILEGX_TLS_DTPOFF32
7894 ENUMX
7895 BFD_RELOC_TILEGX_TLS_TPOFF32
7896 ENUMX
7897 BFD_RELOC_TILEGX_TLS_GD_CALL
7898 ENUMX
7899 BFD_RELOC_TILEGX_IMM8_X0_TLS_GD_ADD
7900 ENUMX
7901 BFD_RELOC_TILEGX_IMM8_X1_TLS_GD_ADD
7902 ENUMX
7903 BFD_RELOC_TILEGX_IMM8_Y0_TLS_GD_ADD
7904 ENUMX
7905 BFD_RELOC_TILEGX_IMM8_Y1_TLS_GD_ADD
7906 ENUMX
7907 BFD_RELOC_TILEGX_TLS_IE_LOAD
7908 ENUMX
7909 BFD_RELOC_TILEGX_IMM8_X0_TLS_ADD
7910 ENUMX
7911 BFD_RELOC_TILEGX_IMM8_X1_TLS_ADD
7912 ENUMX
7913 BFD_RELOC_TILEGX_IMM8_Y0_TLS_ADD
7914 ENUMX
7915 BFD_RELOC_TILEGX_IMM8_Y1_TLS_ADD
7916 ENUMDOC
7917 Tilera TILE-Gx Relocations.
7918
7919 ENUM
7920 BFD_RELOC_BPF_64
7921 ENUMX
7922 BFD_RELOC_BPF_32
7923 ENUMX
7924 BFD_RELOC_BPF_16
7925 ENUMX
7926 BFD_RELOC_BPF_DISP16
7927 ENUMX
7928 BFD_RELOC_BPF_DISP32
7929 ENUMDOC
7930 Linux eBPF relocations.
7931
7932 ENUM
7933 BFD_RELOC_EPIPHANY_SIMM8
7934 ENUMDOC
7935 Adapteva EPIPHANY - 8 bit signed pc-relative displacement
7936 ENUM
7937 BFD_RELOC_EPIPHANY_SIMM24
7938 ENUMDOC
7939 Adapteva EPIPHANY - 24 bit signed pc-relative displacement
7940 ENUM
7941 BFD_RELOC_EPIPHANY_HIGH
7942 ENUMDOC
7943 Adapteva EPIPHANY - 16 most-significant bits of absolute address
7944 ENUM
7945 BFD_RELOC_EPIPHANY_LOW
7946 ENUMDOC
7947 Adapteva EPIPHANY - 16 least-significant bits of absolute address
7948 ENUM
7949 BFD_RELOC_EPIPHANY_SIMM11
7950 ENUMDOC
7951 Adapteva EPIPHANY - 11 bit signed number - add/sub immediate
7952 ENUM
7953 BFD_RELOC_EPIPHANY_IMM11
7954 ENUMDOC
7955 Adapteva EPIPHANY - 11 bit sign-magnitude number (ld/st displacement)
7956 ENUM
7957 BFD_RELOC_EPIPHANY_IMM8
7958 ENUMDOC
7959 Adapteva EPIPHANY - 8 bit immediate for 16 bit mov instruction.
7960
7961 ENUM
7962 BFD_RELOC_VISIUM_HI16
7963 ENUMX
7964 BFD_RELOC_VISIUM_LO16
7965 ENUMX
7966 BFD_RELOC_VISIUM_IM16
7967 ENUMX
7968 BFD_RELOC_VISIUM_REL16
7969 ENUMX
7970 BFD_RELOC_VISIUM_HI16_PCREL
7971 ENUMX
7972 BFD_RELOC_VISIUM_LO16_PCREL
7973 ENUMX
7974 BFD_RELOC_VISIUM_IM16_PCREL
7975 ENUMDOC
7976 Visium Relocations.
7977
7978 ENUM
7979 BFD_RELOC_WASM32_LEB128
7980 ENUMX
7981 BFD_RELOC_WASM32_LEB128_GOT
7982 ENUMX
7983 BFD_RELOC_WASM32_LEB128_GOT_CODE
7984 ENUMX
7985 BFD_RELOC_WASM32_LEB128_PLT
7986 ENUMX
7987 BFD_RELOC_WASM32_PLT_INDEX
7988 ENUMX
7989 BFD_RELOC_WASM32_ABS32_CODE
7990 ENUMX
7991 BFD_RELOC_WASM32_COPY
7992 ENUMX
7993 BFD_RELOC_WASM32_CODE_POINTER
7994 ENUMX
7995 BFD_RELOC_WASM32_INDEX
7996 ENUMX
7997 BFD_RELOC_WASM32_PLT_SIG
7998 ENUMDOC
7999 WebAssembly relocations.
8000
8001 ENUM
8002 BFD_RELOC_CKCORE_NONE
8003 ENUMX
8004 BFD_RELOC_CKCORE_ADDR32
8005 ENUMX
8006 BFD_RELOC_CKCORE_PCREL_IMM8BY4
8007 ENUMX
8008 BFD_RELOC_CKCORE_PCREL_IMM11BY2
8009 ENUMX
8010 BFD_RELOC_CKCORE_PCREL_IMM4BY2
8011 ENUMX
8012 BFD_RELOC_CKCORE_PCREL32
8013 ENUMX
8014 BFD_RELOC_CKCORE_PCREL_JSR_IMM11BY2
8015 ENUMX
8016 BFD_RELOC_CKCORE_GNU_VTINHERIT
8017 ENUMX
8018 BFD_RELOC_CKCORE_GNU_VTENTRY
8019 ENUMX
8020 BFD_RELOC_CKCORE_RELATIVE
8021 ENUMX
8022 BFD_RELOC_CKCORE_COPY
8023 ENUMX
8024 BFD_RELOC_CKCORE_GLOB_DAT
8025 ENUMX
8026 BFD_RELOC_CKCORE_JUMP_SLOT
8027 ENUMX
8028 BFD_RELOC_CKCORE_GOTOFF
8029 ENUMX
8030 BFD_RELOC_CKCORE_GOTPC
8031 ENUMX
8032 BFD_RELOC_CKCORE_GOT32
8033 ENUMX
8034 BFD_RELOC_CKCORE_PLT32
8035 ENUMX
8036 BFD_RELOC_CKCORE_ADDRGOT
8037 ENUMX
8038 BFD_RELOC_CKCORE_ADDRPLT
8039 ENUMX
8040 BFD_RELOC_CKCORE_PCREL_IMM26BY2
8041 ENUMX
8042 BFD_RELOC_CKCORE_PCREL_IMM16BY2
8043 ENUMX
8044 BFD_RELOC_CKCORE_PCREL_IMM16BY4
8045 ENUMX
8046 BFD_RELOC_CKCORE_PCREL_IMM10BY2
8047 ENUMX
8048 BFD_RELOC_CKCORE_PCREL_IMM10BY4
8049 ENUMX
8050 BFD_RELOC_CKCORE_ADDR_HI16
8051 ENUMX
8052 BFD_RELOC_CKCORE_ADDR_LO16
8053 ENUMX
8054 BFD_RELOC_CKCORE_GOTPC_HI16
8055 ENUMX
8056 BFD_RELOC_CKCORE_GOTPC_LO16
8057 ENUMX
8058 BFD_RELOC_CKCORE_GOTOFF_HI16
8059 ENUMX
8060 BFD_RELOC_CKCORE_GOTOFF_LO16
8061 ENUMX
8062 BFD_RELOC_CKCORE_GOT12
8063 ENUMX
8064 BFD_RELOC_CKCORE_GOT_HI16
8065 ENUMX
8066 BFD_RELOC_CKCORE_GOT_LO16
8067 ENUMX
8068 BFD_RELOC_CKCORE_PLT12
8069 ENUMX
8070 BFD_RELOC_CKCORE_PLT_HI16
8071 ENUMX
8072 BFD_RELOC_CKCORE_PLT_LO16
8073 ENUMX
8074 BFD_RELOC_CKCORE_ADDRGOT_HI16
8075 ENUMX
8076 BFD_RELOC_CKCORE_ADDRGOT_LO16
8077 ENUMX
8078 BFD_RELOC_CKCORE_ADDRPLT_HI16
8079 ENUMX
8080 BFD_RELOC_CKCORE_ADDRPLT_LO16
8081 ENUMX
8082 BFD_RELOC_CKCORE_PCREL_JSR_IMM26BY2
8083 ENUMX
8084 BFD_RELOC_CKCORE_TOFFSET_LO16
8085 ENUMX
8086 BFD_RELOC_CKCORE_DOFFSET_LO16
8087 ENUMX
8088 BFD_RELOC_CKCORE_PCREL_IMM18BY2
8089 ENUMX
8090 BFD_RELOC_CKCORE_DOFFSET_IMM18
8091 ENUMX
8092 BFD_RELOC_CKCORE_DOFFSET_IMM18BY2
8093 ENUMX
8094 BFD_RELOC_CKCORE_DOFFSET_IMM18BY4
8095 ENUMX
8096 BFD_RELOC_CKCORE_GOTOFF_IMM18
8097 ENUMX
8098 BFD_RELOC_CKCORE_GOT_IMM18BY4
8099 ENUMX
8100 BFD_RELOC_CKCORE_PLT_IMM18BY4
8101 ENUMX
8102 BFD_RELOC_CKCORE_PCREL_IMM7BY4
8103 ENUMX
8104 BFD_RELOC_CKCORE_TLS_LE32
8105 ENUMX
8106 BFD_RELOC_CKCORE_TLS_IE32
8107 ENUMX
8108 BFD_RELOC_CKCORE_TLS_GD32
8109 ENUMX
8110 BFD_RELOC_CKCORE_TLS_LDM32
8111 ENUMX
8112 BFD_RELOC_CKCORE_TLS_LDO32
8113 ENUMX
8114 BFD_RELOC_CKCORE_TLS_DTPMOD32
8115 ENUMX
8116 BFD_RELOC_CKCORE_TLS_DTPOFF32
8117 ENUMX
8118 BFD_RELOC_CKCORE_TLS_TPOFF32
8119 ENUMX
8120 BFD_RELOC_CKCORE_PCREL_FLRW_IMM8BY4
8121 ENUMX
8122 BFD_RELOC_CKCORE_NOJSRI
8123 ENUMX
8124 BFD_RELOC_CKCORE_CALLGRAPH
8125 ENUMX
8126 BFD_RELOC_CKCORE_IRELATIVE
8127 ENUMX
8128 BFD_RELOC_CKCORE_PCREL_BLOOP_IMM4BY4
8129 ENUMX
8130 BFD_RELOC_CKCORE_PCREL_BLOOP_IMM12BY4
8131 ENUMDOC
8132 C-SKY relocations.
8133
8134 ENUM
8135 BFD_RELOC_S12Z_OPR
8136 ENUMDOC
8137 S12Z relocations.
8138
8139 ENDSENUM
8140 BFD_RELOC_UNUSED
8141 CODE_FRAGMENT
8142 .
8143 .typedef enum bfd_reloc_code_real bfd_reloc_code_real_type;
8144 */
8145
8146 /*
8147 FUNCTION
8148 bfd_reloc_type_lookup
8149 bfd_reloc_name_lookup
8150
8151 SYNOPSIS
8152 reloc_howto_type *bfd_reloc_type_lookup
8153 (bfd *abfd, bfd_reloc_code_real_type code);
8154 reloc_howto_type *bfd_reloc_name_lookup
8155 (bfd *abfd, const char *reloc_name);
8156
8157 DESCRIPTION
8158 Return a pointer to a howto structure which, when
8159 invoked, will perform the relocation @var{code} on data from the
8160 architecture noted.
8161
8162 */
8163
8164 reloc_howto_type *
8165 bfd_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
8166 {
8167 return BFD_SEND (abfd, reloc_type_lookup, (abfd, code));
8168 }
8169
8170 reloc_howto_type *
8171 bfd_reloc_name_lookup (bfd *abfd, const char *reloc_name)
8172 {
8173 return BFD_SEND (abfd, reloc_name_lookup, (abfd, reloc_name));
8174 }
8175
8176 static reloc_howto_type bfd_howto_32 =
8177 HOWTO (0, 00, 2, 32, FALSE, 0, complain_overflow_dont, 0, "VRT32", FALSE, 0xffffffff, 0xffffffff, TRUE);
8178
8179 /*
8180 INTERNAL_FUNCTION
8181 bfd_default_reloc_type_lookup
8182
8183 SYNOPSIS
8184 reloc_howto_type *bfd_default_reloc_type_lookup
8185 (bfd *abfd, bfd_reloc_code_real_type code);
8186
8187 DESCRIPTION
8188 Provides a default relocation lookup routine for any architecture.
8189
8190 */
8191
8192 reloc_howto_type *
8193 bfd_default_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
8194 {
8195 switch (code)
8196 {
8197 case BFD_RELOC_CTOR:
8198 /* The type of reloc used in a ctor, which will be as wide as the
8199 address - so either a 64, 32, or 16 bitter. */
8200 switch (bfd_arch_bits_per_address (abfd))
8201 {
8202 case 64:
8203 BFD_FAIL ();
8204 break;
8205 case 32:
8206 return &bfd_howto_32;
8207 case 16:
8208 BFD_FAIL ();
8209 break;
8210 default:
8211 BFD_FAIL ();
8212 }
8213 break;
8214 default:
8215 BFD_FAIL ();
8216 }
8217 return NULL;
8218 }
8219
8220 /*
8221 FUNCTION
8222 bfd_get_reloc_code_name
8223
8224 SYNOPSIS
8225 const char *bfd_get_reloc_code_name (bfd_reloc_code_real_type code);
8226
8227 DESCRIPTION
8228 Provides a printable name for the supplied relocation code.
8229 Useful mainly for printing error messages.
8230 */
8231
8232 const char *
8233 bfd_get_reloc_code_name (bfd_reloc_code_real_type code)
8234 {
8235 if (code > BFD_RELOC_UNUSED)
8236 return 0;
8237 return bfd_reloc_code_real_names[code];
8238 }
8239
8240 /*
8241 INTERNAL_FUNCTION
8242 bfd_generic_relax_section
8243
8244 SYNOPSIS
8245 bfd_boolean bfd_generic_relax_section
8246 (bfd *abfd,
8247 asection *section,
8248 struct bfd_link_info *,
8249 bfd_boolean *);
8250
8251 DESCRIPTION
8252 Provides default handling for relaxing for back ends which
8253 don't do relaxing.
8254 */
8255
8256 bfd_boolean
8257 bfd_generic_relax_section (bfd *abfd ATTRIBUTE_UNUSED,
8258 asection *section ATTRIBUTE_UNUSED,
8259 struct bfd_link_info *link_info ATTRIBUTE_UNUSED,
8260 bfd_boolean *again)
8261 {
8262 if (bfd_link_relocatable (link_info))
8263 (*link_info->callbacks->einfo)
8264 (_("%P%F: --relax and -r may not be used together\n"));
8265
8266 *again = FALSE;
8267 return TRUE;
8268 }
8269
8270 /*
8271 INTERNAL_FUNCTION
8272 bfd_generic_gc_sections
8273
8274 SYNOPSIS
8275 bfd_boolean bfd_generic_gc_sections
8276 (bfd *, struct bfd_link_info *);
8277
8278 DESCRIPTION
8279 Provides default handling for relaxing for back ends which
8280 don't do section gc -- i.e., does nothing.
8281 */
8282
8283 bfd_boolean
8284 bfd_generic_gc_sections (bfd *abfd ATTRIBUTE_UNUSED,
8285 struct bfd_link_info *info ATTRIBUTE_UNUSED)
8286 {
8287 return TRUE;
8288 }
8289
8290 /*
8291 INTERNAL_FUNCTION
8292 bfd_generic_lookup_section_flags
8293
8294 SYNOPSIS
8295 bfd_boolean bfd_generic_lookup_section_flags
8296 (struct bfd_link_info *, struct flag_info *, asection *);
8297
8298 DESCRIPTION
8299 Provides default handling for section flags lookup
8300 -- i.e., does nothing.
8301 Returns FALSE if the section should be omitted, otherwise TRUE.
8302 */
8303
8304 bfd_boolean
8305 bfd_generic_lookup_section_flags (struct bfd_link_info *info ATTRIBUTE_UNUSED,
8306 struct flag_info *flaginfo,
8307 asection *section ATTRIBUTE_UNUSED)
8308 {
8309 if (flaginfo != NULL)
8310 {
8311 _bfd_error_handler (_("INPUT_SECTION_FLAGS are not supported"));
8312 return FALSE;
8313 }
8314 return TRUE;
8315 }
8316
8317 /*
8318 INTERNAL_FUNCTION
8319 bfd_generic_merge_sections
8320
8321 SYNOPSIS
8322 bfd_boolean bfd_generic_merge_sections
8323 (bfd *, struct bfd_link_info *);
8324
8325 DESCRIPTION
8326 Provides default handling for SEC_MERGE section merging for back ends
8327 which don't have SEC_MERGE support -- i.e., does nothing.
8328 */
8329
8330 bfd_boolean
8331 bfd_generic_merge_sections (bfd *abfd ATTRIBUTE_UNUSED,
8332 struct bfd_link_info *link_info ATTRIBUTE_UNUSED)
8333 {
8334 return TRUE;
8335 }
8336
8337 /*
8338 INTERNAL_FUNCTION
8339 bfd_generic_get_relocated_section_contents
8340
8341 SYNOPSIS
8342 bfd_byte *bfd_generic_get_relocated_section_contents
8343 (bfd *abfd,
8344 struct bfd_link_info *link_info,
8345 struct bfd_link_order *link_order,
8346 bfd_byte *data,
8347 bfd_boolean relocatable,
8348 asymbol **symbols);
8349
8350 DESCRIPTION
8351 Provides default handling of relocation effort for back ends
8352 which can't be bothered to do it efficiently.
8353
8354 */
8355
8356 bfd_byte *
8357 bfd_generic_get_relocated_section_contents (bfd *abfd,
8358 struct bfd_link_info *link_info,
8359 struct bfd_link_order *link_order,
8360 bfd_byte *data,
8361 bfd_boolean relocatable,
8362 asymbol **symbols)
8363 {
8364 bfd *input_bfd = link_order->u.indirect.section->owner;
8365 asection *input_section = link_order->u.indirect.section;
8366 long reloc_size;
8367 arelent **reloc_vector;
8368 long reloc_count;
8369
8370 reloc_size = bfd_get_reloc_upper_bound (input_bfd, input_section);
8371 if (reloc_size < 0)
8372 return NULL;
8373
8374 /* Read in the section. */
8375 if (!bfd_get_full_section_contents (input_bfd, input_section, &data))
8376 return NULL;
8377
8378 if (data == NULL)
8379 return NULL;
8380
8381 if (reloc_size == 0)
8382 return data;
8383
8384 reloc_vector = (arelent **) bfd_malloc (reloc_size);
8385 if (reloc_vector == NULL)
8386 return NULL;
8387
8388 reloc_count = bfd_canonicalize_reloc (input_bfd,
8389 input_section,
8390 reloc_vector,
8391 symbols);
8392 if (reloc_count < 0)
8393 goto error_return;
8394
8395 if (reloc_count > 0)
8396 {
8397 arelent **parent;
8398
8399 for (parent = reloc_vector; *parent != NULL; parent++)
8400 {
8401 char *error_message = NULL;
8402 asymbol *symbol;
8403 bfd_reloc_status_type r;
8404
8405 symbol = *(*parent)->sym_ptr_ptr;
8406 /* PR ld/19628: A specially crafted input file
8407 can result in a NULL symbol pointer here. */
8408 if (symbol == NULL)
8409 {
8410 link_info->callbacks->einfo
8411 /* xgettext:c-format */
8412 (_("%X%P: %pB(%pA): error: relocation for offset %V has no value\n"),
8413 abfd, input_section, (* parent)->address);
8414 goto error_return;
8415 }
8416
8417 /* Zap reloc field when the symbol is from a discarded
8418 section, ignoring any addend. Do the same when called
8419 from bfd_simple_get_relocated_section_contents for
8420 undefined symbols in debug sections. This is to keep
8421 debug info reasonably sane, in particular so that
8422 DW_FORM_ref_addr to another file's .debug_info isn't
8423 confused with an offset into the current file's
8424 .debug_info. */
8425 if ((symbol->section != NULL && discarded_section (symbol->section))
8426 || (symbol->section == bfd_und_section_ptr
8427 && (input_section->flags & SEC_DEBUGGING) != 0
8428 && link_info->input_bfds == link_info->output_bfd))
8429 {
8430 bfd_vma off;
8431 static reloc_howto_type none_howto
8432 = HOWTO (0, 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL,
8433 "unused", FALSE, 0, 0, FALSE);
8434
8435 off = (*parent)->address * bfd_octets_per_byte (input_bfd);
8436 _bfd_clear_contents ((*parent)->howto, input_bfd,
8437 input_section, data, off);
8438 (*parent)->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr;
8439 (*parent)->addend = 0;
8440 (*parent)->howto = &none_howto;
8441 r = bfd_reloc_ok;
8442 }
8443 else
8444 r = bfd_perform_relocation (input_bfd,
8445 *parent,
8446 data,
8447 input_section,
8448 relocatable ? abfd : NULL,
8449 &error_message);
8450
8451 if (relocatable)
8452 {
8453 asection *os = input_section->output_section;
8454
8455 /* A partial link, so keep the relocs. */
8456 os->orelocation[os->reloc_count] = *parent;
8457 os->reloc_count++;
8458 }
8459
8460 if (r != bfd_reloc_ok)
8461 {
8462 switch (r)
8463 {
8464 case bfd_reloc_undefined:
8465 (*link_info->callbacks->undefined_symbol)
8466 (link_info, bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
8467 input_bfd, input_section, (*parent)->address, TRUE);
8468 break;
8469 case bfd_reloc_dangerous:
8470 BFD_ASSERT (error_message != NULL);
8471 (*link_info->callbacks->reloc_dangerous)
8472 (link_info, error_message,
8473 input_bfd, input_section, (*parent)->address);
8474 break;
8475 case bfd_reloc_overflow:
8476 (*link_info->callbacks->reloc_overflow)
8477 (link_info, NULL,
8478 bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
8479 (*parent)->howto->name, (*parent)->addend,
8480 input_bfd, input_section, (*parent)->address);
8481 break;
8482 case bfd_reloc_outofrange:
8483 /* PR ld/13730:
8484 This error can result when processing some partially
8485 complete binaries. Do not abort, but issue an error
8486 message instead. */
8487 link_info->callbacks->einfo
8488 /* xgettext:c-format */
8489 (_("%X%P: %pB(%pA): relocation \"%pR\" goes out of range\n"),
8490 abfd, input_section, * parent);
8491 goto error_return;
8492
8493 case bfd_reloc_notsupported:
8494 /* PR ld/17512
8495 This error can result when processing a corrupt binary.
8496 Do not abort. Issue an error message instead. */
8497 link_info->callbacks->einfo
8498 /* xgettext:c-format */
8499 (_("%X%P: %pB(%pA): relocation \"%pR\" is not supported\n"),
8500 abfd, input_section, * parent);
8501 goto error_return;
8502
8503 default:
8504 /* PR 17512; file: 90c2a92e.
8505 Report unexpected results, without aborting. */
8506 link_info->callbacks->einfo
8507 /* xgettext:c-format */
8508 (_("%X%P: %pB(%pA): relocation \"%pR\" returns an unrecognized value %x\n"),
8509 abfd, input_section, * parent, r);
8510 break;
8511 }
8512
8513 }
8514 }
8515 }
8516
8517 free (reloc_vector);
8518 return data;
8519
8520 error_return:
8521 free (reloc_vector);
8522 return NULL;
8523 }
8524
8525 /*
8526 INTERNAL_FUNCTION
8527 _bfd_generic_set_reloc
8528
8529 SYNOPSIS
8530 void _bfd_generic_set_reloc
8531 (bfd *abfd,
8532 sec_ptr section,
8533 arelent **relptr,
8534 unsigned int count);
8535
8536 DESCRIPTION
8537 Installs a new set of internal relocations in SECTION.
8538 */
8539
8540 void
8541 _bfd_generic_set_reloc (bfd *abfd ATTRIBUTE_UNUSED,
8542 sec_ptr section,
8543 arelent **relptr,
8544 unsigned int count)
8545 {
8546 section->orelocation = relptr;
8547 section->reloc_count = count;
8548 }
8549
8550 /*
8551 INTERNAL_FUNCTION
8552 _bfd_unrecognized_reloc
8553
8554 SYNOPSIS
8555 bfd_boolean _bfd_unrecognized_reloc
8556 (bfd * abfd,
8557 sec_ptr section,
8558 unsigned int r_type);
8559
8560 DESCRIPTION
8561 Reports an unrecognized reloc.
8562 Written as a function in order to reduce code duplication.
8563 Returns FALSE so that it can be called from a return statement.
8564 */
8565
8566 bfd_boolean
8567 _bfd_unrecognized_reloc (bfd * abfd, sec_ptr section, unsigned int r_type)
8568 {
8569 /* xgettext:c-format */
8570 _bfd_error_handler (_("%pB: unrecognized relocation type %#x in section `%pA'"),
8571 abfd, r_type, section);
8572
8573 /* PR 21803: Suggest the most likely cause of this error. */
8574 _bfd_error_handler (_("is this version of the linker - %s - out of date ?"),
8575 BFD_VERSION_STRING);
8576
8577 bfd_set_error (bfd_error_bad_value);
8578 return FALSE;
8579 }
8580
8581 reloc_howto_type *
8582 _bfd_norelocs_bfd_reloc_type_lookup
8583 (bfd *abfd,
8584 bfd_reloc_code_real_type code ATTRIBUTE_UNUSED)
8585 {
8586 return (reloc_howto_type *) _bfd_ptr_bfd_null_error (abfd);
8587 }
8588
8589 reloc_howto_type *
8590 _bfd_norelocs_bfd_reloc_name_lookup (bfd *abfd,
8591 const char *reloc_name ATTRIBUTE_UNUSED)
8592 {
8593 return (reloc_howto_type *) _bfd_ptr_bfd_null_error (abfd);
8594 }
8595
8596 long
8597 _bfd_nodynamic_canonicalize_dynamic_reloc (bfd *abfd,
8598 arelent **relp ATTRIBUTE_UNUSED,
8599 asymbol **symp ATTRIBUTE_UNUSED)
8600 {
8601 return _bfd_long_bfd_n1_error (abfd);
8602 }
This page took 0.20582 seconds and 4 git commands to generate.