bfd/reloc.c

   1 /* BFD support for handling relocation entries.
   2    Copyright (C) 1990-2015 Free Software Foundation, Inc.
   3    Written by Cygnus Support.
   4
   5    This file is part of BFD, the Binary File Descriptor library.
   6
   7    This program is free software; you can redistribute it and/or modify
   8    it under the terms of the GNU General Public License as published by
   9    the Free Software Foundation; either version 3 of the License, or
  10    (at your option) any later version.
  11
  12    This program is distributed in the hope that it will be useful,
  13    but WITHOUT ANY WARRANTY; without even the implied warranty of
  14    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15    GNU General Public License for more details.
  16
  17    You should have received a copy of the GNU General Public License
  18    along with this program; if not, write to the Free Software
  19    Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
  20    MA 02110-1301, USA.  */
  21
  22 /*
  23 SECTION
  24         Relocations
  25
  26         BFD maintains relocations in much the same way it maintains
  27         symbols: they are left alone until required, then read in
  28         en-masse and translated into an internal form.  A common
  29         routine <<bfd_perform_relocation>> acts upon the
  30         canonical form to do the fixup.
  31
  32         Relocations are maintained on a per section basis,
  33         while symbols are maintained on a per BFD basis.
  34
  35         All that a back end has to do to fit the BFD interface is to create
  36         a <<struct reloc_cache_entry>> for each relocation
  37         in a particular section, and fill in the right bits of the structures.
  38
  39 @menu
  40 @* typedef arelent::
  41 @* howto manager::
  42 @end menu
  43
  44 */
  45
  46 /* DO compile in the reloc_code name table from libbfd.h.  */
  47 #define _BFD_MAKE_TABLE_bfd_reloc_code_real
  48
  49 #include "sysdep.h"
  50 #include "bfd.h"
  51 #include "bfdlink.h"
  52 #include "libbfd.h"
  53 /*
  54 DOCDD
  55 INODE
  56         typedef arelent, howto manager, Relocations, Relocations
  57
  58 SUBSECTION
  59         typedef arelent
  60
  61         This is the structure of a relocation entry:
  62
  63 CODE_FRAGMENT
  64 .
  65 .typedef enum bfd_reloc_status
  66 .{
  67 .  {* No errors detected.  *}
  68 .  bfd_reloc_ok,
  69 .
  70 .  {* The relocation was performed, but there was an overflow.  *}
  71 .  bfd_reloc_overflow,
  72 .
  73 .  {* The address to relocate was not within the section supplied.  *}
  74 .  bfd_reloc_outofrange,
  75 .
  76 .  {* Used by special functions.  *}
  77 .  bfd_reloc_continue,
  78 .
  79 .  {* Unsupported relocation size requested.  *}
  80 .  bfd_reloc_notsupported,
  81 .
  82 .  {* Unused.  *}
  83 .  bfd_reloc_other,
  84 .
  85 .  {* The symbol to relocate against was undefined.  *}
  86 .  bfd_reloc_undefined,
  87 .
  88 .  {* The relocation was performed, but may not be ok - presently
  89 .     generated only when linking i960 coff files with i960 b.out
  90 .     symbols.  If this type is returned, the error_message argument
  91 .     to bfd_perform_relocation will be set.  *}
  92 .  bfd_reloc_dangerous
  93 . }
  94 . bfd_reloc_status_type;
  95 .
  96 .
  97 .typedef struct reloc_cache_entry
  98 .{
  99 .  {* A pointer into the canonical table of pointers.  *}
 100 .  struct bfd_symbol **sym_ptr_ptr;
 101 .
 102 .  {* offset in section.  *}
 103 .  bfd_size_type address;
 104 .
 105 .  {* addend for relocation value.  *}
 106 .  bfd_vma addend;
 107 .
 108 .  {* Pointer to how to perform the required relocation.  *}
 109 .  reloc_howto_type *howto;
 110 .
 111 .}
 112 .arelent;
 113 .
 114 */
 115
 116 /*
 117 DESCRIPTION
 118
 119         Here is a description of each of the fields within an <<arelent>>:
 120
 121         o <<sym_ptr_ptr>>
 122
 123         The symbol table pointer points to a pointer to the symbol
 124         associated with the relocation request.  It is the pointer
 125         into the table returned by the back end's
 126         <<canonicalize_symtab>> action. @xref{Symbols}. The symbol is
 127         referenced through a pointer to a pointer so that tools like
 128         the linker can fix up all the symbols of the same name by
 129         modifying only one pointer. The relocation routine looks in
 130         the symbol and uses the base of the section the symbol is
 131         attached to and the value of the symbol as the initial
 132         relocation offset. If the symbol pointer is zero, then the
 133         section provided is looked up.
 134
 135         o <<address>>
 136
 137         The <<address>> field gives the offset in bytes from the base of
 138         the section data which owns the relocation record to the first
 139         byte of relocatable information. The actual data relocated
 140         will be relative to this point; for example, a relocation
 141         type which modifies the bottom two bytes of a four byte word
 142         would not touch the first byte pointed to in a big endian
 143         world.
 144
 145         o <<addend>>
 146
 147         The <<addend>> is a value provided by the back end to be added (!)
 148         to the relocation offset. Its interpretation is dependent upon
 149         the howto. For example, on the 68k the code:
 150
 151 |        char foo[];
 152 |        main()
 153 |                {
 154 |                return foo[0x12345678];
 155 |                }
 156
 157         Could be compiled into:
 158
 159 |        linkw fp,#-4
 160 |        moveb @@#12345678,d0
 161 |        extbl d0
 162 |        unlk fp
 163 |        rts
 164
 165         This could create a reloc pointing to <<foo>>, but leave the
 166         offset in the data, something like:
 167
 168 |RELOCATION RECORDS FOR [.text]:
 169 |offset   type      value
 170 |00000006 32        _foo
 171 |
 172 |00000000 4e56 fffc          ; linkw fp,#-4
 173 |00000004 1039 1234 5678     ; moveb @@#12345678,d0
 174 |0000000a 49c0               ; extbl d0
 175 |0000000c 4e5e               ; unlk fp
 176 |0000000e 4e75               ; rts
 177
 178         Using coff and an 88k, some instructions don't have enough
 179         space in them to represent the full address range, and
 180         pointers have to be loaded in two parts. So you'd get something like:
 181
 182 |        or.u     r13,r0,hi16(_foo+0x12345678)
 183 |        ld.b     r2,r13,lo16(_foo+0x12345678)
 184 |        jmp      r1
 185
 186         This should create two relocs, both pointing to <<_foo>>, and with
 187         0x12340000 in their addend field. The data would consist of:
 188
 189 |RELOCATION RECORDS FOR [.text]:
 190 |offset   type      value
 191 |00000002 HVRT16    _foo+0x12340000
 192 |00000006 LVRT16    _foo+0x12340000
 193 |
 194 |00000000 5da05678           ; or.u r13,r0,0x5678
 195 |00000004 1c4d5678           ; ld.b r2,r13,0x5678
 196 |00000008 f400c001           ; jmp r1
 197
 198         The relocation routine digs out the value from the data, adds
 199         it to the addend to get the original offset, and then adds the
 200         value of <<_foo>>. Note that all 32 bits have to be kept around
 201         somewhere, to cope with carry from bit 15 to bit 16.
 202
 203         One further example is the sparc and the a.out format. The
 204         sparc has a similar problem to the 88k, in that some
 205         instructions don't have room for an entire offset, but on the
 206         sparc the parts are created in odd sized lumps. The designers of
 207         the a.out format chose to not use the data within the section
 208         for storing part of the offset; all the offset is kept within
 209         the reloc. Anything in the data should be ignored.
 210
 211 |        save %sp,-112,%sp
 212 |        sethi %hi(_foo+0x12345678),%g2
 213 |        ldsb [%g2+%lo(_foo+0x12345678)],%i0
 214 |        ret
 215 |        restore
 216
 217         Both relocs contain a pointer to <<foo>>, and the offsets
 218         contain junk.
 219
 220 |RELOCATION RECORDS FOR [.text]:
 221 |offset   type      value
 222 |00000004 HI22      _foo+0x12345678
 223 |00000008 LO10      _foo+0x12345678
 224 |
 225 |00000000 9de3bf90     ; save %sp,-112,%sp
 226 |00000004 05000000     ; sethi %hi(_foo+0),%g2
 227 |00000008 f048a000     ; ldsb [%g2+%lo(_foo+0)],%i0
 228 |0000000c 81c7e008     ; ret
 229 |00000010 81e80000     ; restore
 230
 231         o <<howto>>
 232
 233         The <<howto>> field can be imagined as a
 234         relocation instruction. It is a pointer to a structure which
 235         contains information on what to do with all of the other
 236         information in the reloc record and data section. A back end
 237         would normally have a relocation instruction set and turn
 238         relocations into pointers to the correct structure on input -
 239         but it would be possible to create each howto field on demand.
 240
 241 */
 242
 243 /*
 244 SUBSUBSECTION
 245         <<enum complain_overflow>>
 246
 247         Indicates what sort of overflow checking should be done when
 248         performing a relocation.
 249
 250 CODE_FRAGMENT
 251 .
 252 .enum complain_overflow
 253 .{
 254 .  {* Do not complain on overflow.  *}
 255 .  complain_overflow_dont,
 256 .
 257 .  {* Complain if the value overflows when considered as a signed
 258 .     number one bit larger than the field.  ie. A bitfield of N bits
 259 .     is allowed to represent -2**n to 2**n-1.  *}
 260 .  complain_overflow_bitfield,
 261 .
 262 .  {* Complain if the value overflows when considered as a signed
 263 .     number.  *}
 264 .  complain_overflow_signed,
 265 .
 266 .  {* Complain if the value overflows when considered as an
 267 .     unsigned number.  *}
 268 .  complain_overflow_unsigned
 269 .};
 270
 271 */
 272
 273 /*
 274 SUBSUBSECTION
 275         <<reloc_howto_type>>
 276
 277         The <<reloc_howto_type>> is a structure which contains all the
 278         information that libbfd needs to know to tie up a back end's data.
 279
 280 CODE_FRAGMENT
 281 .struct bfd_symbol;             {* Forward declaration.  *}
 282 .
 283 .struct reloc_howto_struct
 284 .{
 285 .  {*  The type field has mainly a documentary use - the back end can
 286 .      do what it wants with it, though normally the back end's
 287 .      external idea of what a reloc number is stored
 288 .      in this field.  For example, a PC relative word relocation
 289 .      in a coff environment has the type 023 - because that's
 290 .      what the outside world calls a R_PCRWORD reloc.  *}
 291 .  unsigned int type;
 292 .
 293 .  {*  The value the final relocation is shifted right by.  This drops
 294 .      unwanted data from the relocation.  *}
 295 .  unsigned int rightshift;
 296 .
 297 .  {*  The size of the item to be relocated.  This is *not* a
 298 .      power-of-two measure.  To get the number of bytes operated
 299 .      on by a type of relocation, use bfd_get_reloc_size.  *}
 300 .  int size;
 301 .
 302 .  {*  The number of bits in the item to be relocated.  This is used
 303 .      when doing overflow checking.  *}
 304 .  unsigned int bitsize;
 305 .
 306 .  {*  The relocation is relative to the field being relocated.  *}
 307 .  bfd_boolean pc_relative;
 308 .
 309 .  {*  The bit position of the reloc value in the destination.
 310 .      The relocated value is left shifted by this amount.  *}
 311 .  unsigned int bitpos;
 312 .
 313 .  {* What type of overflow error should be checked for when
 314 .     relocating.  *}
 315 .  enum complain_overflow complain_on_overflow;
 316 .
 317 .  {* If this field is non null, then the supplied function is
 318 .     called rather than the normal function.  This allows really
 319 .     strange relocation methods to be accommodated (e.g., i960 callj
 320 .     instructions).  *}
 321 .  bfd_reloc_status_type (*special_function)
 322 .    (bfd *, arelent *, struct bfd_symbol *, void *, asection *,
 323 .     bfd *, char **);
 324 .
 325 .  {* The textual name of the relocation type.  *}
 326 .  char *name;
 327 .
 328 .  {* Some formats record a relocation addend in the section contents
 329 .     rather than with the relocation.  For ELF formats this is the
 330 .     distinction between USE_REL and USE_RELA (though the code checks
 331 .     for USE_REL == 1/0).  The value of this field is TRUE if the
 332 .     addend is recorded with the section contents; when performing a
 333 .     partial link (ld -r) the section contents (the data) will be
 334 .     modified.  The value of this field is FALSE if addends are
 335 .     recorded with the relocation (in arelent.addend); when performing
 336 .     a partial link the relocation will be modified.
 337 .     All relocations for all ELF USE_RELA targets should set this field
 338 .     to FALSE (values of TRUE should be looked on with suspicion).
 339 .     However, the converse is not true: not all relocations of all ELF
 340 .     USE_REL targets set this field to TRUE.  Why this is so is peculiar
 341 .     to each particular target.  For relocs that aren't used in partial
 342 .     links (e.g. GOT stuff) it doesn't matter what this is set to.  *}
 343 .  bfd_boolean partial_inplace;
 344 .
 345 .  {* src_mask selects the part of the instruction (or data) to be used
 346 .     in the relocation sum.  If the target relocations don't have an
 347 .     addend in the reloc, eg. ELF USE_REL, src_mask will normally equal
 348 .     dst_mask to extract the addend from the section contents.  If
 349 .     relocations do have an addend in the reloc, eg. ELF USE_RELA, this
 350 .     field should be zero.  Non-zero values for ELF USE_RELA targets are
 351 .     bogus as in those cases the value in the dst_mask part of the
 352 .     section contents should be treated as garbage.  *}
 353 .  bfd_vma src_mask;
 354 .
 355 .  {* dst_mask selects which parts of the instruction (or data) are
 356 .     replaced with a relocated value.  *}
 357 .  bfd_vma dst_mask;
 358 .
 359 .  {* When some formats create PC relative instructions, they leave
 360 .     the value of the pc of the place being relocated in the offset
 361 .     slot of the instruction, so that a PC relative relocation can
 362 .     be made just by adding in an ordinary offset (e.g., sun3 a.out).
 363 .     Some formats leave the displacement part of an instruction
 364 .     empty (e.g., m88k bcs); this flag signals the fact.  *}
 365 .  bfd_boolean pcrel_offset;
 366 .};
 367 .
 368 */
 369
 370 /*
 371 FUNCTION
 372         The HOWTO Macro
 373
 374 DESCRIPTION
 375         The HOWTO define is horrible and will go away.
 376
 377 .#define HOWTO(C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC) \
 378 .  { (unsigned) C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC }
 379
 380 DESCRIPTION
 381         And will be replaced with the totally magic way. But for the
 382         moment, we are compatible, so do it this way.
 383
 384 .#define NEWHOWTO(FUNCTION, NAME, SIZE, REL, IN) \
 385 .  HOWTO (0, 0, SIZE, 0, REL, 0, complain_overflow_dont, FUNCTION, \
 386 .         NAME, FALSE, 0, 0, IN)
 387 .
 388
 389 DESCRIPTION
 390         This is used to fill in an empty howto entry in an array.
 391
 392 .#define EMPTY_HOWTO(C) \
 393 .  HOWTO ((C), 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL, \
 394 .         NULL, FALSE, 0, 0, FALSE)
 395 .
 396
 397 DESCRIPTION
 398         Helper routine to turn a symbol into a relocation value.
 399
 400 .#define HOWTO_PREPARE(relocation, symbol)               \
 401 .  {                                                     \
 402 .    if (symbol != NULL)                                 \
 403 .      {                                                 \
 404 .        if (bfd_is_com_section (symbol->section))       \
 405 .          {                                             \
 406 .            relocation = 0;                             \
 407 .          }                                             \
 408 .        else                                            \
 409 .          {                                             \
 410 .            relocation = symbol->value;                 \
 411 .          }                                             \
 412 .      }                                                 \
 413 .  }
 414 .
 415 */
 416
 417 /*
 418 FUNCTION
 419         bfd_get_reloc_size
 420
 421 SYNOPSIS
 422         unsigned int bfd_get_reloc_size (reloc_howto_type *);
 423
 424 DESCRIPTION
 425         For a reloc_howto_type that operates on a fixed number of bytes,
 426         this returns the number of bytes operated on.
 427  */
 428
 429 unsigned int
 430 bfd_get_reloc_size (reloc_howto_type *howto)
 431 {
 432   switch (howto->size)
 433     {
 434     case 0: return 1;
 435     case 1: return 2;
 436     case 2: return 4;
 437     case 3: return 0;
 438     case 4: return 8;
 439     case 8: return 16;
 440     case -1: return 2;
 441     case -2: return 4;
 442     default: abort ();
 443     }
 444 }
 445
 446 /*
 447 TYPEDEF
 448         arelent_chain
 449
 450 DESCRIPTION
 451
 452         How relocs are tied together in an <<asection>>:
 453
 454 .typedef struct relent_chain
 455 .{
 456 .  arelent relent;
 457 .  struct relent_chain *next;
 458 .}
 459 .arelent_chain;
 460 .
 461 */
 462
 463 /* N_ONES produces N one bits, without overflowing machine arithmetic.  */
 464 #define N_ONES(n) (((((bfd_vma) 1 << ((n) - 1)) - 1) << 1) | 1)
 465
 466 /*
 467 FUNCTION
 468         bfd_check_overflow
 469
 470 SYNOPSIS
 471         bfd_reloc_status_type bfd_check_overflow
 472           (enum complain_overflow how,
 473            unsigned int bitsize,
 474            unsigned int rightshift,
 475            unsigned int addrsize,
 476            bfd_vma relocation);
 477
 478 DESCRIPTION
 479         Perform overflow checking on @var{relocation} which has
 480         @var{bitsize} significant bits and will be shifted right by
 481         @var{rightshift} bits, on a machine with addresses containing
 482         @var{addrsize} significant bits.  The result is either of
 483         @code{bfd_reloc_ok} or @code{bfd_reloc_overflow}.
 484
 485 */
 486
 487 bfd_reloc_status_type
 488 bfd_check_overflow (enum complain_overflow how,
 489                     unsigned int bitsize,
 490                     unsigned int rightshift,
 491                     unsigned int addrsize,
 492                     bfd_vma relocation)
 493 {
 494   bfd_vma fieldmask, addrmask, signmask, ss, a;
 495   bfd_reloc_status_type flag = bfd_reloc_ok;
 496
 497   /* Note: BITSIZE should always be <= ADDRSIZE, but in case it's not,
 498      we'll be permissive: extra bits in the field mask will
 499      automatically extend the address mask for purposes of the
 500      overflow check.  */
 501   fieldmask = N_ONES (bitsize);
 502   signmask = ~fieldmask;
 503   addrmask = N_ONES (addrsize) | (fieldmask << rightshift);
 504   a = (relocation & addrmask) >> rightshift;
 505
 506   switch (how)
 507     {
 508     case complain_overflow_dont:
 509       break;
 510
 511     case complain_overflow_signed:
 512       /* If any sign bits are set, all sign bits must be set.  That
 513          is, A must be a valid negative address after shifting.  */
 514       signmask = ~ (fieldmask >> 1);
 515       /* Fall thru */
 516
 517     case complain_overflow_bitfield:
 518       /* Bitfields are sometimes signed, sometimes unsigned.  We
 519          explicitly allow an address wrap too, which means a bitfield
 520          of n bits is allowed to store -2**n to 2**n-1.  Thus overflow
 521          if the value has some, but not all, bits set outside the
 522          field.  */
 523       ss = a & signmask;
 524       if (ss != 0 && ss != ((addrmask >> rightshift) & signmask))
 525         flag = bfd_reloc_overflow;
 526       break;
 527
 528     case complain_overflow_unsigned:
 529       /* We have an overflow if the address does not fit in the field.  */
 530       if ((a & signmask) != 0)
 531         flag = bfd_reloc_overflow;
 532       break;
 533
 534     default:
 535       abort ();
 536     }
 537
 538   return flag;
 539 }
 540
 541 /*
 542 FUNCTION
 543         bfd_perform_relocation
 544
 545 SYNOPSIS
 546         bfd_reloc_status_type bfd_perform_relocation
 547           (bfd *abfd,
 548            arelent *reloc_entry,
 549            void *data,
 550            asection *input_section,
 551            bfd *output_bfd,
 552            char **error_message);
 553
 554 DESCRIPTION
 555         If @var{output_bfd} is supplied to this function, the
 556         generated image will be relocatable; the relocations are
 557         copied to the output file after they have been changed to
 558         reflect the new state of the world. There are two ways of
 559         reflecting the results of partial linkage in an output file:
 560         by modifying the output data in place, and by modifying the
 561         relocation record.  Some native formats (e.g., basic a.out and
 562         basic coff) have no way of specifying an addend in the
 563         relocation type, so the addend has to go in the output data.
 564         This is no big deal since in these formats the output data
 565         slot will always be big enough for the addend. Complex reloc
 566         types with addends were invented to solve just this problem.
 567         The @var{error_message} argument is set to an error message if
 568         this return @code{bfd_reloc_dangerous}.
 569
 570 */
 571
 572 bfd_reloc_status_type
 573 bfd_perform_relocation (bfd *abfd,
 574                         arelent *reloc_entry,
 575                         void *data,
 576                         asection *input_section,
 577                         bfd *output_bfd,
 578                         char **error_message)
 579 {
 580   bfd_vma relocation;
 581   bfd_reloc_status_type flag = bfd_reloc_ok;
 582   bfd_size_type octets;
 583   bfd_vma output_base = 0;
 584   reloc_howto_type *howto = reloc_entry->howto;
 585   asection *reloc_target_output_section;
 586   asymbol *symbol;
 587
 588   symbol = *(reloc_entry->sym_ptr_ptr);
 589   if (bfd_is_abs_section (symbol->section)
 590       && output_bfd != NULL)
 591     {
 592       reloc_entry->address += input_section->output_offset;
 593       return bfd_reloc_ok;
 594     }
 595
 596   /* PR 17512: file: 0f67f69d.  */
 597   if (howto == NULL)
 598     return bfd_reloc_undefined;
 599
 600   /* If we are not producing relocatable output, return an error if
 601      the symbol is not defined.  An undefined weak symbol is
 602      considered to have a value of zero (SVR4 ABI, p. 4-27).  */
 603   if (bfd_is_und_section (symbol->section)
 604       && (symbol->flags & BSF_WEAK) == 0
 605       && output_bfd == NULL)
 606     flag = bfd_reloc_undefined;
 607
 608   /* If there is a function supplied to handle this relocation type,
 609      call it.  It'll return `bfd_reloc_continue' if further processing
 610      can be done.  */
 611   if (howto->special_function)
 612     {
 613       bfd_reloc_status_type cont;
 614       cont = howto->special_function (abfd, reloc_entry, symbol, data,
 615                                       input_section, output_bfd,
 616                                       error_message);
 617       if (cont != bfd_reloc_continue)
 618         return cont;
 619     }
 620
 621   /* Is the address of the relocation really within the section?
 622      Include the size of the reloc in the test for out of range addresses.
 623      PR 17512: file: c146ab8b, 46dff27f, 38e53ebf.  */
 624   octets = reloc_entry->address * bfd_octets_per_byte (abfd);
 625   if (octets + bfd_get_reloc_size (howto)
 626       > bfd_get_section_limit_octets (abfd, input_section))
 627     return bfd_reloc_outofrange;
 628
 629   /* Work out which section the relocation is targeted at and the
 630      initial relocation command value.  */
 631
 632   /* Get symbol value.  (Common symbols are special.)  */
 633   if (bfd_is_com_section (symbol->section))
 634     relocation = 0;
 635   else
 636     relocation = symbol->value;
 637
 638   reloc_target_output_section = symbol->section->output_section;
 639
 640   /* Convert input-section-relative symbol value to absolute.  */
 641   if ((output_bfd && ! howto->partial_inplace)
 642       || reloc_target_output_section == NULL)
 643     output_base = 0;
 644   else
 645     output_base = reloc_target_output_section->vma;
 646
 647   relocation += output_base + symbol->section->output_offset;
 648
 649   /* Add in supplied addend.  */
 650   relocation += reloc_entry->addend;
 651
 652   /* Here the variable relocation holds the final address of the
 653      symbol we are relocating against, plus any addend.  */
 654
 655   if (howto->pc_relative)
 656     {
 657       /* This is a PC relative relocation.  We want to set RELOCATION
 658          to the distance between the address of the symbol and the
 659          location.  RELOCATION is already the address of the symbol.
 660
 661          We start by subtracting the address of the section containing
 662          the location.
 663
 664          If pcrel_offset is set, we must further subtract the position
 665          of the location within the section.  Some targets arrange for
 666          the addend to be the negative of the position of the location
 667          within the section; for example, i386-aout does this.  For
 668          i386-aout, pcrel_offset is FALSE.  Some other targets do not
 669          include the position of the location; for example, m88kbcs,
 670          or ELF.  For those targets, pcrel_offset is TRUE.
 671
 672          If we are producing relocatable output, then we must ensure
 673          that this reloc will be correctly computed when the final
 674          relocation is done.  If pcrel_offset is FALSE we want to wind
 675          up with the negative of the location within the section,
 676          which means we must adjust the existing addend by the change
 677          in the location within the section.  If pcrel_offset is TRUE
 678          we do not want to adjust the existing addend at all.
 679
 680          FIXME: This seems logical to me, but for the case of
 681          producing relocatable output it is not what the code
 682          actually does.  I don't want to change it, because it seems
 683          far too likely that something will break.  */
 684
 685       relocation -=
 686         input_section->output_section->vma + input_section->output_offset;
 687
 688       if (howto->pcrel_offset)
 689         relocation -= reloc_entry->address;
 690     }
 691
 692   if (output_bfd != NULL)
 693     {
 694       if (! howto->partial_inplace)
 695         {
 696           /* This is a partial relocation, and we want to apply the relocation
 697              to the reloc entry rather than the raw data. Modify the reloc
 698              inplace to reflect what we now know.  */
 699           reloc_entry->addend = relocation;
 700           reloc_entry->address += input_section->output_offset;
 701           return flag;
 702         }
 703       else
 704         {
 705           /* This is a partial relocation, but inplace, so modify the
 706              reloc record a bit.
 707
 708              If we've relocated with a symbol with a section, change
 709              into a ref to the section belonging to the symbol.  */
 710
 711           reloc_entry->address += input_section->output_offset;
 712
 713           /* WTF?? */
 714           if (abfd->xvec->flavour == bfd_target_coff_flavour
 715               && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
 716               && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
 717             {
 718               /* For m68k-coff, the addend was being subtracted twice during
 719                  relocation with -r.  Removing the line below this comment
 720                  fixes that problem; see PR 2953.
 721
 722 However, Ian wrote the following, regarding removing the line below,
 723 which explains why it is still enabled:  --djm
 724
 725 If you put a patch like that into BFD you need to check all the COFF
 726 linkers.  I am fairly certain that patch will break coff-i386 (e.g.,
 727 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
 728 problem in a different way.  There may very well be a reason that the
 729 code works as it does.
 730
 731 Hmmm.  The first obvious point is that bfd_perform_relocation should
 732 not have any tests that depend upon the flavour.  It's seem like
 733 entirely the wrong place for such a thing.  The second obvious point
 734 is that the current code ignores the reloc addend when producing
 735 relocatable output for COFF.  That's peculiar.  In fact, I really
 736 have no idea what the point of the line you want to remove is.
 737
 738 A typical COFF reloc subtracts the old value of the symbol and adds in
 739 the new value to the location in the object file (if it's a pc
 740 relative reloc it adds the difference between the symbol value and the
 741 location).  When relocating we need to preserve that property.
 742
 743 BFD handles this by setting the addend to the negative of the old
 744 value of the symbol.  Unfortunately it handles common symbols in a
 745 non-standard way (it doesn't subtract the old value) but that's a
 746 different story (we can't change it without losing backward
 747 compatibility with old object files) (coff-i386 does subtract the old
 748 value, to be compatible with existing coff-i386 targets, like SCO).
 749
 750 So everything works fine when not producing relocatable output.  When
 751 we are producing relocatable output, logically we should do exactly
 752 what we do when not producing relocatable output.  Therefore, your
 753 patch is correct.  In fact, it should probably always just set
 754 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
 755 add the value into the object file.  This won't hurt the COFF code,
 756 which doesn't use the addend; I'm not sure what it will do to other
 757 formats (the thing to check for would be whether any formats both use
 758 the addend and set partial_inplace).
 759
 760 When I wanted to make coff-i386 produce relocatable output, I ran
 761 into the problem that you are running into: I wanted to remove that
 762 line.  Rather than risk it, I made the coff-i386 relocs use a special
 763 function; it's coff_i386_reloc in coff-i386.c.  The function
 764 specifically adds the addend field into the object file, knowing that
 765 bfd_perform_relocation is not going to.  If you remove that line, then
 766 coff-i386.c will wind up adding the addend field in twice.  It's
 767 trivial to fix; it just needs to be done.
 768
 769 The problem with removing the line is just that it may break some
 770 working code.  With BFD it's hard to be sure of anything.  The right
 771 way to deal with this is simply to build and test at least all the
 772 supported COFF targets.  It should be straightforward if time and disk
 773 space consuming.  For each target:
 774     1) build the linker
 775     2) generate some executable, and link it using -r (I would
 776        probably use paranoia.o and link against newlib/libc.a, which
 777        for all the supported targets would be available in
 778        /usr/cygnus/progressive/H-host/target/lib/libc.a).
 779     3) make the change to reloc.c
 780     4) rebuild the linker
 781     5) repeat step 2
 782     6) if the resulting object files are the same, you have at least
 783        made it no worse
 784     7) if they are different you have to figure out which version is
 785        right
 786 */
 787               relocation -= reloc_entry->addend;
 788               reloc_entry->addend = 0;
 789             }
 790           else
 791             {
 792               reloc_entry->addend = relocation;
 793             }
 794         }
 795     }
 796
 797   /* FIXME: This overflow checking is incomplete, because the value
 798      might have overflowed before we get here.  For a correct check we
 799      need to compute the value in a size larger than bitsize, but we
 800      can't reasonably do that for a reloc the same size as a host
 801      machine word.
 802      FIXME: We should also do overflow checking on the result after
 803      adding in the value contained in the object file.  */
 804   if (howto->complain_on_overflow != complain_overflow_dont
 805       && flag == bfd_reloc_ok)
 806     flag = bfd_check_overflow (howto->complain_on_overflow,
 807                                howto->bitsize,
 808                                howto->rightshift,
 809                                bfd_arch_bits_per_address (abfd),
 810                                relocation);
 811
 812   /* Either we are relocating all the way, or we don't want to apply
 813      the relocation to the reloc entry (probably because there isn't
 814      any room in the output format to describe addends to relocs).  */
 815
 816   /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
 817      (OSF version 1.3, compiler version 3.11).  It miscompiles the
 818      following program:
 819
 820      struct str
 821      {
 822        unsigned int i0;
 823      } s = { 0 };
 824
 825      int
 826      main ()
 827      {
 828        unsigned long x;
 829
 830        x = 0x100000000;
 831        x <<= (unsigned long) s.i0;
 832        if (x == 0)
 833          printf ("failed\n");
 834        else
 835          printf ("succeeded (%lx)\n", x);
 836      }
 837      */
 838
 839   relocation >>= (bfd_vma) howto->rightshift;
 840
 841   /* Shift everything up to where it's going to be used.  */
 842   relocation <<= (bfd_vma) howto->bitpos;
 843
 844   /* Wait for the day when all have the mask in them.  */
 845
 846   /* What we do:
 847      i instruction to be left alone
 848      o offset within instruction
 849      r relocation offset to apply
 850      S src mask
 851      D dst mask
 852      N ~dst mask
 853      A part 1
 854      B part 2
 855      R result
 856
 857      Do this:
 858      ((  i i i i i o o o o o  from bfd_get<size>
 859      and           S S S S S) to get the size offset we want
 860      +   r r r r r r r r r r) to get the final value to place
 861      and           D D D D D  to chop to right size
 862      -----------------------
 863      =             A A A A A
 864      And this:
 865      (   i i i i i o o o o o  from bfd_get<size>
 866      and N N N N N          ) get instruction
 867      -----------------------
 868      =   B B B B B
 869
 870      And then:
 871      (   B B B B B
 872      or            A A A A A)
 873      -----------------------
 874      =   R R R R R R R R R R  put into bfd_put<size>
 875      */
 876
 877 #define DOIT(x) \
 878   x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) +  relocation) & howto->dst_mask))
 879
 880   switch (howto->size)
 881     {
 882     case 0:
 883       {
 884         char x = bfd_get_8 (abfd, (char *) data + octets);
 885         DOIT (x);
 886         bfd_put_8 (abfd, x, (unsigned char *) data + octets);
 887       }
 888       break;
 889
 890     case 1:
 891       {
 892         short x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
 893         DOIT (x);
 894         bfd_put_16 (abfd, (bfd_vma) x, (unsigned char *) data + octets);
 895       }
 896       break;
 897     case 2:
 898       {
 899         long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
 900         DOIT (x);
 901         bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 902       }
 903       break;
 904     case -2:
 905       {
 906         long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
 907         relocation = -relocation;
 908         DOIT (x);
 909         bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 910       }
 911       break;
 912
 913     case -1:
 914       {
 915         long x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
 916         relocation = -relocation;
 917         DOIT (x);
 918         bfd_put_16 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 919       }
 920       break;
 921
 922     case 3:
 923       /* Do nothing */
 924       break;
 925
 926     case 4:
 927 #ifdef BFD64
 928       {
 929         bfd_vma x = bfd_get_64 (abfd, (bfd_byte *) data + octets);
 930         DOIT (x);
 931         bfd_put_64 (abfd, x, (bfd_byte *) data + octets);
 932       }
 933 #else
 934       abort ();
 935 #endif
 936       break;
 937     default:
 938       return bfd_reloc_other;
 939     }
 940
 941   return flag;
 942 }
 943
 944 /*
 945 FUNCTION
 946         bfd_install_relocation
 947
 948 SYNOPSIS
 949         bfd_reloc_status_type bfd_install_relocation
 950           (bfd *abfd,
 951            arelent *reloc_entry,
 952            void *data, bfd_vma data_start,
 953            asection *input_section,
 954            char **error_message);
 955
 956 DESCRIPTION
 957         This looks remarkably like <<bfd_perform_relocation>>, except it
 958         does not expect that the section contents have been filled in.
 959         I.e., it's suitable for use when creating, rather than applying
 960         a relocation.
 961
 962         For now, this function should be considered reserved for the
 963         assembler.
 964 */
 965
 966 bfd_reloc_status_type
 967 bfd_install_relocation (bfd *abfd,
 968                         arelent *reloc_entry,
 969                         void *data_start,
 970                         bfd_vma data_start_offset,
 971                         asection *input_section,
 972                         char **error_message)
 973 {
 974   bfd_vma relocation;
 975   bfd_reloc_status_type flag = bfd_reloc_ok;
 976   bfd_size_type octets;
 977   bfd_vma output_base = 0;
 978   reloc_howto_type *howto = reloc_entry->howto;
 979   asection *reloc_target_output_section;
 980   asymbol *symbol;
 981   bfd_byte *data;
 982
 983   symbol = *(reloc_entry->sym_ptr_ptr);
 984   if (bfd_is_abs_section (symbol->section))
 985     {
 986       reloc_entry->address += input_section->output_offset;
 987       return bfd_reloc_ok;
 988     }
 989
 990   /* If there is a function supplied to handle this relocation type,
 991      call it.  It'll return `bfd_reloc_continue' if further processing
 992      can be done.  */
 993   if (howto->special_function)
 994     {
 995       bfd_reloc_status_type cont;
 996
 997       /* XXX - The special_function calls haven't been fixed up to deal
 998          with creating new relocations and section contents.  */
 999       cont = howto->special_function (abfd, reloc_entry, symbol,
1000                                       /* XXX - Non-portable! */
1001                                       ((bfd_byte *) data_start
1002                                        - data_start_offset),
1003                                       input_section, abfd, error_message);
1004       if (cont != bfd_reloc_continue)
1005         return cont;
1006     }
1007
1008   /* Is the address of the relocation really within the section?  */
1009   octets = reloc_entry->address * bfd_octets_per_byte (abfd);
1010   if (octets + bfd_get_reloc_size (howto)
1011       > bfd_get_section_limit_octets (abfd, input_section))
1012     return bfd_reloc_outofrange;
1013
1014   /* Work out which section the relocation is targeted at and the
1015      initial relocation command value.  */
1016
1017   /* Get symbol value.  (Common symbols are special.)  */
1018   if (bfd_is_com_section (symbol->section))
1019     relocation = 0;
1020   else
1021     relocation = symbol->value;
1022
1023   reloc_target_output_section = symbol->section->output_section;
1024
1025   /* Convert input-section-relative symbol value to absolute.  */
1026   if (! howto->partial_inplace)
1027     output_base = 0;
1028   else
1029     output_base = reloc_target_output_section->vma;
1030
1031   relocation += output_base + symbol->section->output_offset;
1032
1033   /* Add in supplied addend.  */
1034   relocation += reloc_entry->addend;
1035
1036   /* Here the variable relocation holds the final address of the
1037      symbol we are relocating against, plus any addend.  */
1038
1039   if (howto->pc_relative)
1040     {
1041       /* This is a PC relative relocation.  We want to set RELOCATION
1042          to the distance between the address of the symbol and the
1043          location.  RELOCATION is already the address of the symbol.
1044
1045          We start by subtracting the address of the section containing
1046          the location.
1047
1048          If pcrel_offset is set, we must further subtract the position
1049          of the location within the section.  Some targets arrange for
1050          the addend to be the negative of the position of the location
1051          within the section; for example, i386-aout does this.  For
1052          i386-aout, pcrel_offset is FALSE.  Some other targets do not
1053          include the position of the location; for example, m88kbcs,
1054          or ELF.  For those targets, pcrel_offset is TRUE.
1055
1056          If we are producing relocatable output, then we must ensure
1057          that this reloc will be correctly computed when the final
1058          relocation is done.  If pcrel_offset is FALSE we want to wind
1059          up with the negative of the location within the section,
1060          which means we must adjust the existing addend by the change
1061          in the location within the section.  If pcrel_offset is TRUE
1062          we do not want to adjust the existing addend at all.
1063
1064          FIXME: This seems logical to me, but for the case of
1065          producing relocatable output it is not what the code
1066          actually does.  I don't want to change it, because it seems
1067          far too likely that something will break.  */
1068
1069       relocation -=
1070         input_section->output_section->vma + input_section->output_offset;
1071
1072       if (howto->pcrel_offset && howto->partial_inplace)
1073         relocation -= reloc_entry->address;
1074     }
1075
1076   if (! howto->partial_inplace)
1077     {
1078       /* This is a partial relocation, and we want to apply the relocation
1079          to the reloc entry rather than the raw data. Modify the reloc
1080          inplace to reflect what we now know.  */
1081       reloc_entry->addend = relocation;
1082       reloc_entry->address += input_section->output_offset;
1083       return flag;
1084     }
1085   else
1086     {
1087       /* This is a partial relocation, but inplace, so modify the
1088          reloc record a bit.
1089
1090          If we've relocated with a symbol with a section, change
1091          into a ref to the section belonging to the symbol.  */
1092       reloc_entry->address += input_section->output_offset;
1093
1094       /* WTF?? */
1095       if (abfd->xvec->flavour == bfd_target_coff_flavour
1096           && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
1097           && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
1098         {
1099
1100           /* For m68k-coff, the addend was being subtracted twice during
1101              relocation with -r.  Removing the line below this comment
1102              fixes that problem; see PR 2953.
1103
1104 However, Ian wrote the following, regarding removing the line below,
1105 which explains why it is still enabled:  --djm
1106
1107 If you put a patch like that into BFD you need to check all the COFF
1108 linkers.  I am fairly certain that patch will break coff-i386 (e.g.,
1109 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
1110 problem in a different way.  There may very well be a reason that the
1111 code works as it does.
1112
1113 Hmmm.  The first obvious point is that bfd_install_relocation should
1114 not have any tests that depend upon the flavour.  It's seem like
1115 entirely the wrong place for such a thing.  The second obvious point
1116 is that the current code ignores the reloc addend when producing
1117 relocatable output for COFF.  That's peculiar.  In fact, I really
1118 have no idea what the point of the line you want to remove is.
1119
1120 A typical COFF reloc subtracts the old value of the symbol and adds in
1121 the new value to the location in the object file (if it's a pc
1122 relative reloc it adds the difference between the symbol value and the
1123 location).  When relocating we need to preserve that property.
1124
1125 BFD handles this by setting the addend to the negative of the old
1126 value of the symbol.  Unfortunately it handles common symbols in a
1127 non-standard way (it doesn't subtract the old value) but that's a
1128 different story (we can't change it without losing backward
1129 compatibility with old object files) (coff-i386 does subtract the old
1130 value, to be compatible with existing coff-i386 targets, like SCO).
1131
1132 So everything works fine when not producing relocatable output.  When
1133 we are producing relocatable output, logically we should do exactly
1134 what we do when not producing relocatable output.  Therefore, your
1135 patch is correct.  In fact, it should probably always just set
1136 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
1137 add the value into the object file.  This won't hurt the COFF code,
1138 which doesn't use the addend; I'm not sure what it will do to other
1139 formats (the thing to check for would be whether any formats both use
1140 the addend and set partial_inplace).
1141
1142 When I wanted to make coff-i386 produce relocatable output, I ran
1143 into the problem that you are running into: I wanted to remove that
1144 line.  Rather than risk it, I made the coff-i386 relocs use a special
1145 function; it's coff_i386_reloc in coff-i386.c.  The function
1146 specifically adds the addend field into the object file, knowing that
1147 bfd_install_relocation is not going to.  If you remove that line, then
1148 coff-i386.c will wind up adding the addend field in twice.  It's
1149 trivial to fix; it just needs to be done.
1150
1151 The problem with removing the line is just that it may break some
1152 working code.  With BFD it's hard to be sure of anything.  The right
1153 way to deal with this is simply to build and test at least all the
1154 supported COFF targets.  It should be straightforward if time and disk
1155 space consuming.  For each target:
1156     1) build the linker
1157     2) generate some executable, and link it using -r (I would
1158        probably use paranoia.o and link against newlib/libc.a, which
1159        for all the supported targets would be available in
1160        /usr/cygnus/progressive/H-host/target/lib/libc.a).
1161     3) make the change to reloc.c
1162     4) rebuild the linker
1163     5) repeat step 2
1164     6) if the resulting object files are the same, you have at least
1165        made it no worse
1166     7) if they are different you have to figure out which version is
1167        right.  */
1168           relocation -= reloc_entry->addend;
1169           /* FIXME: There should be no target specific code here...  */
1170           if (strcmp (abfd->xvec->name, "coff-z8k") != 0)
1171             reloc_entry->addend = 0;
1172         }
1173       else
1174         {
1175           reloc_entry->addend = relocation;
1176         }
1177     }
1178
1179   /* FIXME: This overflow checking is incomplete, because the value
1180      might have overflowed before we get here.  For a correct check we
1181      need to compute the value in a size larger than bitsize, but we
1182      can't reasonably do that for a reloc the same size as a host
1183      machine word.
1184      FIXME: We should also do overflow checking on the result after
1185      adding in the value contained in the object file.  */
1186   if (howto->complain_on_overflow != complain_overflow_dont)
1187     flag = bfd_check_overflow (howto->complain_on_overflow,
1188                                howto->bitsize,
1189                                howto->rightshift,
1190                                bfd_arch_bits_per_address (abfd),
1191                                relocation);
1192
1193   /* Either we are relocating all the way, or we don't want to apply
1194      the relocation to the reloc entry (probably because there isn't
1195      any room in the output format to describe addends to relocs).  */
1196
1197   /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
1198      (OSF version 1.3, compiler version 3.11).  It miscompiles the
1199      following program:
1200
1201      struct str
1202      {
1203        unsigned int i0;
1204      } s = { 0 };
1205
1206      int
1207      main ()
1208      {
1209        unsigned long x;
1210
1211        x = 0x100000000;
1212        x <<= (unsigned long) s.i0;
1213        if (x == 0)
1214          printf ("failed\n");
1215        else
1216          printf ("succeeded (%lx)\n", x);
1217      }
1218      */
1219
1220   relocation >>= (bfd_vma) howto->rightshift;
1221
1222   /* Shift everything up to where it's going to be used.  */
1223   relocation <<= (bfd_vma) howto->bitpos;
1224
1225   /* Wait for the day when all have the mask in them.  */
1226
1227   /* What we do:
1228      i instruction to be left alone
1229      o offset within instruction
1230      r relocation offset to apply
1231      S src mask
1232      D dst mask
1233      N ~dst mask
1234      A part 1
1235      B part 2
1236      R result
1237
1238      Do this:
1239      ((  i i i i i o o o o o  from bfd_get<size>
1240      and           S S S S S) to get the size offset we want
1241      +   r r r r r r r r r r) to get the final value to place
1242      and           D D D D D  to chop to right size
1243      -----------------------
1244      =             A A A A A
1245      And this:
1246      (   i i i i i o o o o o  from bfd_get<size>
1247      and N N N N N          ) get instruction
1248      -----------------------
1249      =   B B B B B
1250
1251      And then:
1252      (   B B B B B
1253      or            A A A A A)
1254      -----------------------
1255      =   R R R R R R R R R R  put into bfd_put<size>
1256      */
1257
1258 #define DOIT(x) \
1259   x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) +  relocation) & howto->dst_mask))
1260
1261   data = (bfd_byte *) data_start + (octets - data_start_offset);
1262
1263   switch (howto->size)
1264     {
1265     case 0:
1266       {
1267         char x = bfd_get_8 (abfd, data);
1268         DOIT (x);
1269         bfd_put_8 (abfd, x, data);
1270       }
1271       break;
1272
1273     case 1:
1274       {
1275         short x = bfd_get_16 (abfd, data);
1276         DOIT (x);
1277         bfd_put_16 (abfd, (bfd_vma) x, data);
1278       }
1279       break;
1280     case 2:
1281       {
1282         long x = bfd_get_32 (abfd, data);
1283         DOIT (x);
1284         bfd_put_32 (abfd, (bfd_vma) x, data);
1285       }
1286       break;
1287     case -2:
1288       {
1289         long x = bfd_get_32 (abfd, data);
1290         relocation = -relocation;
1291         DOIT (x);
1292         bfd_put_32 (abfd, (bfd_vma) x, data);
1293       }
1294       break;
1295
1296     case 3:
1297       /* Do nothing */
1298       break;
1299
1300     case 4:
1301       {
1302         bfd_vma x = bfd_get_64 (abfd, data);
1303         DOIT (x);
1304         bfd_put_64 (abfd, x, data);
1305       }
1306       break;
1307     default:
1308       return bfd_reloc_other;
1309     }
1310
1311   return flag;
1312 }
1313
1314 /* This relocation routine is used by some of the backend linkers.
1315    They do not construct asymbol or arelent structures, so there is no
1316    reason for them to use bfd_perform_relocation.  Also,
1317    bfd_perform_relocation is so hacked up it is easier to write a new
1318    function than to try to deal with it.
1319
1320    This routine does a final relocation.  Whether it is useful for a
1321    relocatable link depends upon how the object format defines
1322    relocations.
1323
1324    FIXME: This routine ignores any special_function in the HOWTO,
1325    since the existing special_function values have been written for
1326    bfd_perform_relocation.
1327
1328    HOWTO is the reloc howto information.
1329    INPUT_BFD is the BFD which the reloc applies to.
1330    INPUT_SECTION is the section which the reloc applies to.
1331    CONTENTS is the contents of the section.
1332    ADDRESS is the address of the reloc within INPUT_SECTION.
1333    VALUE is the value of the symbol the reloc refers to.
1334    ADDEND is the addend of the reloc.  */
1335
1336 bfd_reloc_status_type
1337 _bfd_final_link_relocate (reloc_howto_type *howto,
1338                           bfd *input_bfd,
1339                           asection *input_section,
1340                           bfd_byte *contents,
1341                           bfd_vma address,
1342                           bfd_vma value,
1343                           bfd_vma addend)
1344 {
1345   bfd_vma relocation;
1346   bfd_size_type octets = address * bfd_octets_per_byte (input_bfd);
1347
1348   /* Sanity check the address.  */
1349   if (octets + bfd_get_reloc_size (howto)
1350       > bfd_get_section_limit_octets (input_bfd, input_section))
1351     return bfd_reloc_outofrange;
1352
1353   /* This function assumes that we are dealing with a basic relocation
1354      against a symbol.  We want to compute the value of the symbol to
1355      relocate to.  This is just VALUE, the value of the symbol, plus
1356      ADDEND, any addend associated with the reloc.  */
1357   relocation = value + addend;
1358
1359   /* If the relocation is PC relative, we want to set RELOCATION to
1360      the distance between the symbol (currently in RELOCATION) and the
1361      location we are relocating.  Some targets (e.g., i386-aout)
1362      arrange for the contents of the section to be the negative of the
1363      offset of the location within the section; for such targets
1364      pcrel_offset is FALSE.  Other targets (e.g., m88kbcs or ELF)
1365      simply leave the contents of the section as zero; for such
1366      targets pcrel_offset is TRUE.  If pcrel_offset is FALSE we do not
1367      need to subtract out the offset of the location within the
1368      section (which is just ADDRESS).  */
1369   if (howto->pc_relative)
1370     {
1371       relocation -= (input_section->output_section->vma
1372                      + input_section->output_offset);
1373       if (howto->pcrel_offset)
1374         relocation -= address;
1375     }
1376
1377   return _bfd_relocate_contents (howto, input_bfd, relocation,
1378                                  contents + address);
1379 }
1380
1381 /* Relocate a given location using a given value and howto.  */
1382
1383 bfd_reloc_status_type
1384 _bfd_relocate_contents (reloc_howto_type *howto,
1385                         bfd *input_bfd,
1386                         bfd_vma relocation,
1387                         bfd_byte *location)
1388 {
1389   int size;
1390   bfd_vma x = 0;
1391   bfd_reloc_status_type flag;
1392   unsigned int rightshift = howto->rightshift;
1393   unsigned int bitpos = howto->bitpos;
1394
1395   /* If the size is negative, negate RELOCATION.  This isn't very
1396      general.  */
1397   if (howto->size < 0)
1398     relocation = -relocation;
1399
1400   /* Get the value we are going to relocate.  */
1401   size = bfd_get_reloc_size (howto);
1402   switch (size)
1403     {
1404     default:
1405       abort ();
1406     case 0:
1407       return bfd_reloc_ok;
1408     case 1:
1409       x = bfd_get_8 (input_bfd, location);
1410       break;
1411     case 2:
1412       x = bfd_get_16 (input_bfd, location);
1413       break;
1414     case 4:
1415       x = bfd_get_32 (input_bfd, location);
1416       break;
1417     case 8:
1418 #ifdef BFD64
1419       x = bfd_get_64 (input_bfd, location);
1420 #else
1421       abort ();
1422 #endif
1423       break;
1424     }
1425
1426   /* Check for overflow.  FIXME: We may drop bits during the addition
1427      which we don't check for.  We must either check at every single
1428      operation, which would be tedious, or we must do the computations
1429      in a type larger than bfd_vma, which would be inefficient.  */
1430   flag = bfd_reloc_ok;
1431   if (howto->complain_on_overflow != complain_overflow_dont)
1432     {
1433       bfd_vma addrmask, fieldmask, signmask, ss;
1434       bfd_vma a, b, sum;
1435
1436       /* Get the values to be added together.  For signed and unsigned
1437          relocations, we assume that all values should be truncated to
1438          the size of an address.  For bitfields, all the bits matter.
1439          See also bfd_check_overflow.  */
1440       fieldmask = N_ONES (howto->bitsize);
1441       signmask = ~fieldmask;
1442       addrmask = (N_ONES (bfd_arch_bits_per_address (input_bfd))
1443                   | (fieldmask << rightshift));
1444       a = (relocation & addrmask) >> rightshift;
1445       b = (x & howto->src_mask & addrmask) >> bitpos;
1446       addrmask >>= rightshift;
1447
1448       switch (howto->complain_on_overflow)
1449         {
1450         case complain_overflow_signed:
1451           /* If any sign bits are set, all sign bits must be set.
1452              That is, A must be a valid negative address after
1453              shifting.  */
1454           signmask = ~(fieldmask >> 1);
1455           /* Fall thru */
1456
1457         case complain_overflow_bitfield:
1458           /* Much like the signed check, but for a field one bit
1459              wider.  We allow a bitfield to represent numbers in the
1460              range -2**n to 2**n-1, where n is the number of bits in the
1461              field.  Note that when bfd_vma is 32 bits, a 32-bit reloc
1462              can't overflow, which is exactly what we want.  */
1463           ss = a & signmask;
1464           if (ss != 0 && ss != (addrmask & signmask))
1465             flag = bfd_reloc_overflow;
1466
1467           /* We only need this next bit of code if the sign bit of B
1468              is below the sign bit of A.  This would only happen if
1469              SRC_MASK had fewer bits than BITSIZE.  Note that if
1470              SRC_MASK has more bits than BITSIZE, we can get into
1471              trouble; we would need to verify that B is in range, as
1472              we do for A above.  */
1473           ss = ((~howto->src_mask) >> 1) & howto->src_mask;
1474           ss >>= bitpos;
1475
1476           /* Set all the bits above the sign bit.  */
1477           b = (b ^ ss) - ss;
1478
1479           /* Now we can do the addition.  */
1480           sum = a + b;
1481
1482           /* See if the result has the correct sign.  Bits above the
1483              sign bit are junk now; ignore them.  If the sum is
1484              positive, make sure we did not have all negative inputs;
1485              if the sum is negative, make sure we did not have all
1486              positive inputs.  The test below looks only at the sign
1487              bits, and it really just
1488                  SIGN (A) == SIGN (B) && SIGN (A) != SIGN (SUM)
1489
1490              We mask with addrmask here to explicitly allow an address
1491              wrap-around.  The Linux kernel relies on it, and it is
1492              the only way to write assembler code which can run when
1493              loaded at a location 0x80000000 away from the location at
1494              which it is linked.  */
1495           if (((~(a ^ b)) & (a ^ sum)) & signmask & addrmask)
1496             flag = bfd_reloc_overflow;
1497           break;
1498
1499         case complain_overflow_unsigned:
1500           /* Checking for an unsigned overflow is relatively easy:
1501              trim the addresses and add, and trim the result as well.
1502              Overflow is normally indicated when the result does not
1503              fit in the field.  However, we also need to consider the
1504              case when, e.g., fieldmask is 0x7fffffff or smaller, an
1505              input is 0x80000000, and bfd_vma is only 32 bits; then we
1506              will get sum == 0, but there is an overflow, since the
1507              inputs did not fit in the field.  Instead of doing a
1508              separate test, we can check for this by or-ing in the
1509              operands when testing for the sum overflowing its final
1510              field.  */
1511           sum = (a + b) & addrmask;
1512           if ((a | b | sum) & signmask)
1513             flag = bfd_reloc_overflow;
1514           break;
1515
1516         default:
1517           abort ();
1518         }
1519     }
1520
1521   /* Put RELOCATION in the right bits.  */
1522   relocation >>= (bfd_vma) rightshift;
1523   relocation <<= (bfd_vma) bitpos;
1524
1525   /* Add RELOCATION to the right bits of X.  */
1526   x = ((x & ~howto->dst_mask)
1527        | (((x & howto->src_mask) + relocation) & howto->dst_mask));
1528
1529   /* Put the relocated value back in the object file.  */
1530   switch (size)
1531     {
1532     default:
1533       abort ();
1534     case 1:
1535       bfd_put_8 (input_bfd, x, location);
1536       break;
1537     case 2:
1538       bfd_put_16 (input_bfd, x, location);
1539       break;
1540     case 4:
1541       bfd_put_32 (input_bfd, x, location);
1542       break;
1543     case 8:
1544 #ifdef BFD64
1545       bfd_put_64 (input_bfd, x, location);
1546 #else
1547       abort ();
1548 #endif
1549       break;
1550     }
1551
1552   return flag;
1553 }
1554
1555 /* Clear a given location using a given howto, by applying a fixed relocation
1556    value and discarding any in-place addend.  This is used for fixed-up
1557    relocations against discarded symbols, to make ignorable debug or unwind
1558    information more obvious.  */
1559
1560 void
1561 _bfd_clear_contents (reloc_howto_type *howto,
1562                      bfd *input_bfd,
1563                      asection *input_section,
1564                      bfd_byte *location)
1565 {
1566   int size;
1567   bfd_vma x = 0;
1568
1569   /* Get the value we are going to relocate.  */
1570   size = bfd_get_reloc_size (howto);
1571   switch (size)
1572     {
1573     default:
1574       abort ();
1575     case 0:
1576       return;
1577     case 1:
1578       x = bfd_get_8 (input_bfd, location);
1579       break;
1580     case 2:
1581       x = bfd_get_16 (input_bfd, location);
1582       break;
1583     case 4:
1584       x = bfd_get_32 (input_bfd, location);
1585       break;
1586     case 8:
1587 #ifdef BFD64
1588       x = bfd_get_64 (input_bfd, location);
1589 #else
1590       abort ();
1591 #endif
1592       break;
1593     }
1594
1595   /* Zero out the unwanted bits of X.  */
1596   x &= ~howto->dst_mask;
1597
1598   /* For a range list, use 1 instead of 0 as placeholder.  0
1599      would terminate the list, hiding any later entries.  */
1600   if (strcmp (bfd_get_section_name (input_bfd, input_section),
1601               ".debug_ranges") == 0
1602       && (howto->dst_mask & 1) != 0)
1603     x |= 1;
1604
1605   /* Put the relocated value back in the object file.  */
1606   switch (size)
1607     {
1608     default:
1609     case 0:
1610       abort ();
1611     case 1:
1612       bfd_put_8 (input_bfd, x, location);
1613       break;
1614     case 2:
1615       bfd_put_16 (input_bfd, x, location);
1616       break;
1617     case 4:
1618       bfd_put_32 (input_bfd, x, location);
1619       break;
1620     case 8:
1621 #ifdef BFD64
1622       bfd_put_64 (input_bfd, x, location);
1623 #else
1624       abort ();
1625 #endif
1626       break;
1627     }
1628 }
1629
1630 /*
1631 DOCDD
1632 INODE
1633         howto manager,  , typedef arelent, Relocations
1634
1635 SUBSECTION
1636         The howto manager
1637
1638         When an application wants to create a relocation, but doesn't
1639         know what the target machine might call it, it can find out by
1640         using this bit of code.
1641
1642 */
1643
1644 /*
1645 TYPEDEF
1646         bfd_reloc_code_type
1647
1648 DESCRIPTION
1649         The insides of a reloc code.  The idea is that, eventually, there
1650         will be one enumerator for every type of relocation we ever do.
1651         Pass one of these values to <<bfd_reloc_type_lookup>>, and it'll
1652         return a howto pointer.
1653
1654         This does mean that the application must determine the correct
1655         enumerator value; you can't get a howto pointer from a random set
1656         of attributes.
1657
1658 SENUM
1659    bfd_reloc_code_real
1660
1661 ENUM
1662   BFD_RELOC_64
1663 ENUMX
1664   BFD_RELOC_32
1665 ENUMX
1666   BFD_RELOC_26
1667 ENUMX
1668   BFD_RELOC_24
1669 ENUMX
1670   BFD_RELOC_16
1671 ENUMX
1672   BFD_RELOC_14
1673 ENUMX
1674   BFD_RELOC_8
1675 ENUMDOC
1676   Basic absolute relocations of N bits.
1677
1678 ENUM
1679   BFD_RELOC_64_PCREL
1680 ENUMX
1681   BFD_RELOC_32_PCREL
1682 ENUMX
1683   BFD_RELOC_24_PCREL
1684 ENUMX
1685   BFD_RELOC_16_PCREL
1686 ENUMX
1687   BFD_RELOC_12_PCREL
1688 ENUMX
1689   BFD_RELOC_8_PCREL
1690 ENUMDOC
1691   PC-relative relocations.  Sometimes these are relative to the address
1692 of the relocation itself; sometimes they are relative to the start of
1693 the section containing the relocation.  It depends on the specific target.
1694
1695 The 24-bit relocation is used in some Intel 960 configurations.
1696
1697 ENUM
1698   BFD_RELOC_32_SECREL
1699 ENUMDOC
1700   Section relative relocations.  Some targets need this for DWARF2.
1701
1702 ENUM
1703   BFD_RELOC_32_GOT_PCREL
1704 ENUMX
1705   BFD_RELOC_16_GOT_PCREL
1706 ENUMX
1707   BFD_RELOC_8_GOT_PCREL
1708 ENUMX
1709   BFD_RELOC_32_GOTOFF
1710 ENUMX
1711   BFD_RELOC_16_GOTOFF
1712 ENUMX
1713   BFD_RELOC_LO16_GOTOFF
1714 ENUMX
1715   BFD_RELOC_HI16_GOTOFF
1716 ENUMX
1717   BFD_RELOC_HI16_S_GOTOFF
1718 ENUMX
1719   BFD_RELOC_8_GOTOFF
1720 ENUMX
1721   BFD_RELOC_64_PLT_PCREL
1722 ENUMX
1723   BFD_RELOC_32_PLT_PCREL
1724 ENUMX
1725   BFD_RELOC_24_PLT_PCREL
1726 ENUMX
1727   BFD_RELOC_16_PLT_PCREL
1728 ENUMX
1729   BFD_RELOC_8_PLT_PCREL
1730 ENUMX
1731   BFD_RELOC_64_PLTOFF
1732 ENUMX
1733   BFD_RELOC_32_PLTOFF
1734 ENUMX
1735   BFD_RELOC_16_PLTOFF
1736 ENUMX
1737   BFD_RELOC_LO16_PLTOFF
1738 ENUMX
1739   BFD_RELOC_HI16_PLTOFF
1740 ENUMX
1741   BFD_RELOC_HI16_S_PLTOFF
1742 ENUMX
1743   BFD_RELOC_8_PLTOFF
1744 ENUMDOC
1745   For ELF.
1746
1747 ENUM
1748   BFD_RELOC_SIZE32
1749 ENUMX
1750   BFD_RELOC_SIZE64
1751 ENUMDOC
1752   Size relocations.
1753
1754 ENUM
1755   BFD_RELOC_68K_GLOB_DAT
1756 ENUMX
1757   BFD_RELOC_68K_JMP_SLOT
1758 ENUMX
1759   BFD_RELOC_68K_RELATIVE
1760 ENUMX
1761   BFD_RELOC_68K_TLS_GD32
1762 ENUMX
1763   BFD_RELOC_68K_TLS_GD16
1764 ENUMX
1765   BFD_RELOC_68K_TLS_GD8
1766 ENUMX
1767   BFD_RELOC_68K_TLS_LDM32
1768 ENUMX
1769   BFD_RELOC_68K_TLS_LDM16
1770 ENUMX
1771   BFD_RELOC_68K_TLS_LDM8
1772 ENUMX
1773   BFD_RELOC_68K_TLS_LDO32
1774 ENUMX
1775   BFD_RELOC_68K_TLS_LDO16
1776 ENUMX
1777   BFD_RELOC_68K_TLS_LDO8
1778 ENUMX
1779   BFD_RELOC_68K_TLS_IE32
1780 ENUMX
1781   BFD_RELOC_68K_TLS_IE16
1782 ENUMX
1783   BFD_RELOC_68K_TLS_IE8
1784 ENUMX
1785   BFD_RELOC_68K_TLS_LE32
1786 ENUMX
1787   BFD_RELOC_68K_TLS_LE16
1788 ENUMX
1789   BFD_RELOC_68K_TLS_LE8
1790 ENUMDOC
1791   Relocations used by 68K ELF.
1792
1793 ENUM
1794   BFD_RELOC_32_BASEREL
1795 ENUMX
1796   BFD_RELOC_16_BASEREL
1797 ENUMX
1798   BFD_RELOC_LO16_BASEREL
1799 ENUMX
1800   BFD_RELOC_HI16_BASEREL
1801 ENUMX
1802   BFD_RELOC_HI16_S_BASEREL
1803 ENUMX
1804   BFD_RELOC_8_BASEREL
1805 ENUMX
1806   BFD_RELOC_RVA
1807 ENUMDOC
1808   Linkage-table relative.
1809
1810 ENUM
1811   BFD_RELOC_8_FFnn
1812 ENUMDOC
1813   Absolute 8-bit relocation, but used to form an address like 0xFFnn.
1814
1815 ENUM
1816   BFD_RELOC_32_PCREL_S2
1817 ENUMX
1818   BFD_RELOC_16_PCREL_S2
1819 ENUMX
1820   BFD_RELOC_23_PCREL_S2
1821 ENUMDOC
1822   These PC-relative relocations are stored as word displacements --
1823 i.e., byte displacements shifted right two bits.  The 30-bit word
1824 displacement (<<32_PCREL_S2>> -- 32 bits, shifted 2) is used on the
1825 SPARC.  (SPARC tools generally refer to this as <<WDISP30>>.)  The
1826 signed 16-bit displacement is used on the MIPS, and the 23-bit
1827 displacement is used on the Alpha.
1828
1829 ENUM
1830   BFD_RELOC_HI22
1831 ENUMX
1832   BFD_RELOC_LO10
1833 ENUMDOC
1834   High 22 bits and low 10 bits of 32-bit value, placed into lower bits of
1835 the target word.  These are used on the SPARC.
1836
1837 ENUM
1838   BFD_RELOC_GPREL16
1839 ENUMX
1840   BFD_RELOC_GPREL32
1841 ENUMDOC
1842   For systems that allocate a Global Pointer register, these are
1843 displacements off that register.  These relocation types are
1844 handled specially, because the value the register will have is
1845 decided relatively late.
1846
1847 ENUM
1848   BFD_RELOC_I960_CALLJ
1849 ENUMDOC
1850   Reloc types used for i960/b.out.
1851
1852 ENUM
1853   BFD_RELOC_NONE
1854 ENUMX
1855   BFD_RELOC_SPARC_WDISP22
1856 ENUMX
1857   BFD_RELOC_SPARC22
1858 ENUMX
1859   BFD_RELOC_SPARC13
1860 ENUMX
1861   BFD_RELOC_SPARC_GOT10
1862 ENUMX
1863   BFD_RELOC_SPARC_GOT13
1864 ENUMX
1865   BFD_RELOC_SPARC_GOT22
1866 ENUMX
1867   BFD_RELOC_SPARC_PC10
1868 ENUMX
1869   BFD_RELOC_SPARC_PC22
1870 ENUMX
1871   BFD_RELOC_SPARC_WPLT30
1872 ENUMX
1873   BFD_RELOC_SPARC_COPY
1874 ENUMX
1875   BFD_RELOC_SPARC_GLOB_DAT
1876 ENUMX
1877   BFD_RELOC_SPARC_JMP_SLOT
1878 ENUMX
1879   BFD_RELOC_SPARC_RELATIVE
1880 ENUMX
1881   BFD_RELOC_SPARC_UA16
1882 ENUMX
1883   BFD_RELOC_SPARC_UA32
1884 ENUMX
1885   BFD_RELOC_SPARC_UA64
1886 ENUMX
1887   BFD_RELOC_SPARC_GOTDATA_HIX22
1888 ENUMX
1889   BFD_RELOC_SPARC_GOTDATA_LOX10
1890 ENUMX
1891   BFD_RELOC_SPARC_GOTDATA_OP_HIX22
1892 ENUMX
1893   BFD_RELOC_SPARC_GOTDATA_OP_LOX10
1894 ENUMX
1895   BFD_RELOC_SPARC_GOTDATA_OP
1896 ENUMX
1897   BFD_RELOC_SPARC_JMP_IREL
1898 ENUMX
1899   BFD_RELOC_SPARC_IRELATIVE
1900 ENUMDOC
1901   SPARC ELF relocations.  There is probably some overlap with other
1902   relocation types already defined.
1903
1904 ENUM
1905   BFD_RELOC_SPARC_BASE13
1906 ENUMX
1907   BFD_RELOC_SPARC_BASE22
1908 ENUMDOC
1909   I think these are specific to SPARC a.out (e.g., Sun 4).
1910
1911 ENUMEQ
1912   BFD_RELOC_SPARC_64
1913   BFD_RELOC_64
1914 ENUMX
1915   BFD_RELOC_SPARC_10
1916 ENUMX
1917   BFD_RELOC_SPARC_11
1918 ENUMX
1919   BFD_RELOC_SPARC_OLO10
1920 ENUMX
1921   BFD_RELOC_SPARC_HH22
1922 ENUMX
1923   BFD_RELOC_SPARC_HM10
1924 ENUMX
1925   BFD_RELOC_SPARC_LM22
1926 ENUMX
1927   BFD_RELOC_SPARC_PC_HH22
1928 ENUMX
1929   BFD_RELOC_SPARC_PC_HM10
1930 ENUMX
1931   BFD_RELOC_SPARC_PC_LM22
1932 ENUMX
1933   BFD_RELOC_SPARC_WDISP16
1934 ENUMX
1935   BFD_RELOC_SPARC_WDISP19
1936 ENUMX
1937   BFD_RELOC_SPARC_7
1938 ENUMX
1939   BFD_RELOC_SPARC_6
1940 ENUMX
1941   BFD_RELOC_SPARC_5
1942 ENUMEQX
1943   BFD_RELOC_SPARC_DISP64
1944   BFD_RELOC_64_PCREL
1945 ENUMX
1946   BFD_RELOC_SPARC_PLT32
1947 ENUMX
1948   BFD_RELOC_SPARC_PLT64
1949 ENUMX
1950   BFD_RELOC_SPARC_HIX22
1951 ENUMX
1952   BFD_RELOC_SPARC_LOX10
1953 ENUMX
1954   BFD_RELOC_SPARC_H44
1955 ENUMX
1956   BFD_RELOC_SPARC_M44
1957 ENUMX
1958   BFD_RELOC_SPARC_L44
1959 ENUMX
1960   BFD_RELOC_SPARC_REGISTER
1961 ENUMX
1962   BFD_RELOC_SPARC_H34
1963 ENUMX
1964   BFD_RELOC_SPARC_SIZE32
1965 ENUMX
1966   BFD_RELOC_SPARC_SIZE64
1967 ENUMX
1968   BFD_RELOC_SPARC_WDISP10
1969 ENUMDOC
1970   SPARC64 relocations
1971
1972 ENUM
1973   BFD_RELOC_SPARC_REV32
1974 ENUMDOC
1975   SPARC little endian relocation
1976 ENUM
1977   BFD_RELOC_SPARC_TLS_GD_HI22
1978 ENUMX
1979   BFD_RELOC_SPARC_TLS_GD_LO10
1980 ENUMX
1981   BFD_RELOC_SPARC_TLS_GD_ADD
1982 ENUMX
1983   BFD_RELOC_SPARC_TLS_GD_CALL
1984 ENUMX
1985   BFD_RELOC_SPARC_TLS_LDM_HI22
1986 ENUMX
1987   BFD_RELOC_SPARC_TLS_LDM_LO10
1988 ENUMX
1989   BFD_RELOC_SPARC_TLS_LDM_ADD
1990 ENUMX
1991   BFD_RELOC_SPARC_TLS_LDM_CALL
1992 ENUMX
1993   BFD_RELOC_SPARC_TLS_LDO_HIX22
1994 ENUMX
1995   BFD_RELOC_SPARC_TLS_LDO_LOX10
1996 ENUMX
1997   BFD_RELOC_SPARC_TLS_LDO_ADD
1998 ENUMX
1999   BFD_RELOC_SPARC_TLS_IE_HI22
2000 ENUMX
2001   BFD_RELOC_SPARC_TLS_IE_LO10
2002 ENUMX
2003   BFD_RELOC_SPARC_TLS_IE_LD
2004 ENUMX
2005   BFD_RELOC_SPARC_TLS_IE_LDX
2006 ENUMX
2007   BFD_RELOC_SPARC_TLS_IE_ADD
2008 ENUMX
2009   BFD_RELOC_SPARC_TLS_LE_HIX22
2010 ENUMX
2011   BFD_RELOC_SPARC_TLS_LE_LOX10
2012 ENUMX
2013   BFD_RELOC_SPARC_TLS_DTPMOD32
2014 ENUMX
2015   BFD_RELOC_SPARC_TLS_DTPMOD64
2016 ENUMX
2017   BFD_RELOC_SPARC_TLS_DTPOFF32
2018 ENUMX
2019   BFD_RELOC_SPARC_TLS_DTPOFF64
2020 ENUMX
2021   BFD_RELOC_SPARC_TLS_TPOFF32
2022 ENUMX
2023   BFD_RELOC_SPARC_TLS_TPOFF64
2024 ENUMDOC
2025   SPARC TLS relocations
2026
2027 ENUM
2028   BFD_RELOC_SPU_IMM7
2029 ENUMX
2030   BFD_RELOC_SPU_IMM8
2031 ENUMX
2032   BFD_RELOC_SPU_IMM10
2033 ENUMX
2034   BFD_RELOC_SPU_IMM10W
2035 ENUMX
2036   BFD_RELOC_SPU_IMM16
2037 ENUMX
2038   BFD_RELOC_SPU_IMM16W
2039 ENUMX
2040   BFD_RELOC_SPU_IMM18
2041 ENUMX
2042   BFD_RELOC_SPU_PCREL9a
2043 ENUMX
2044   BFD_RELOC_SPU_PCREL9b
2045 ENUMX
2046   BFD_RELOC_SPU_PCREL16
2047 ENUMX
2048   BFD_RELOC_SPU_LO16
2049 ENUMX
2050   BFD_RELOC_SPU_HI16
2051 ENUMX
2052   BFD_RELOC_SPU_PPU32
2053 ENUMX
2054   BFD_RELOC_SPU_PPU64
2055 ENUMX
2056   BFD_RELOC_SPU_ADD_PIC
2057 ENUMDOC
2058   SPU Relocations.
2059
2060 ENUM
2061   BFD_RELOC_ALPHA_GPDISP_HI16
2062 ENUMDOC
2063   Alpha ECOFF and ELF relocations.  Some of these treat the symbol or
2064      "addend" in some special way.
2065   For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when
2066      writing; when reading, it will be the absolute section symbol.  The
2067      addend is the displacement in bytes of the "lda" instruction from
2068      the "ldah" instruction (which is at the address of this reloc).
2069 ENUM
2070   BFD_RELOC_ALPHA_GPDISP_LO16
2071 ENUMDOC
2072   For GPDISP_LO16 ("ignore") relocations, the symbol is handled as
2073      with GPDISP_HI16 relocs.  The addend is ignored when writing the
2074      relocations out, and is filled in with the file's GP value on
2075      reading, for convenience.
2076
2077 ENUM
2078   BFD_RELOC_ALPHA_GPDISP
2079 ENUMDOC
2080   The ELF GPDISP relocation is exactly the same as the GPDISP_HI16
2081      relocation except that there is no accompanying GPDISP_LO16
2082      relocation.
2083
2084 ENUM
2085   BFD_RELOC_ALPHA_LITERAL
2086 ENUMX
2087   BFD_RELOC_ALPHA_ELF_LITERAL
2088 ENUMX
2089   BFD_RELOC_ALPHA_LITUSE
2090 ENUMDOC
2091   The Alpha LITERAL/LITUSE relocs are produced by a symbol reference;
2092      the assembler turns it into a LDQ instruction to load the address of
2093      the symbol, and then fills in a register in the real instruction.
2094
2095      The LITERAL reloc, at the LDQ instruction, refers to the .lita
2096      section symbol.  The addend is ignored when writing, but is filled
2097      in with the file's GP value on reading, for convenience, as with the
2098      GPDISP_LO16 reloc.
2099
2100      The ELF_LITERAL reloc is somewhere between 16_GOTOFF and GPDISP_LO16.
2101      It should refer to the symbol to be referenced, as with 16_GOTOFF,
2102      but it generates output not based on the position within the .got
2103      section, but relative to the GP value chosen for the file during the
2104      final link stage.
2105
2106      The LITUSE reloc, on the instruction using the loaded address, gives
2107      information to the linker that it might be able to use to optimize
2108      away some literal section references.  The symbol is ignored (read
2109      as the absolute section symbol), and the "addend" indicates the type
2110      of instruction using the register:
2111               1 - "memory" fmt insn
2112               2 - byte-manipulation (byte offset reg)
2113               3 - jsr (target of branch)
2114
2115 ENUM
2116   BFD_RELOC_ALPHA_HINT
2117 ENUMDOC
2118   The HINT relocation indicates a value that should be filled into the
2119      "hint" field of a jmp/jsr/ret instruction, for possible branch-
2120      prediction logic which may be provided on some processors.
2121
2122 ENUM
2123   BFD_RELOC_ALPHA_LINKAGE
2124 ENUMDOC
2125   The LINKAGE relocation outputs a linkage pair in the object file,
2126      which is filled by the linker.
2127
2128 ENUM
2129   BFD_RELOC_ALPHA_CODEADDR
2130 ENUMDOC
2131   The CODEADDR relocation outputs a STO_CA in the object file,
2132      which is filled by the linker.
2133
2134 ENUM
2135   BFD_RELOC_ALPHA_GPREL_HI16
2136 ENUMX
2137   BFD_RELOC_ALPHA_GPREL_LO16
2138 ENUMDOC
2139   The GPREL_HI/LO relocations together form a 32-bit offset from the
2140      GP register.
2141
2142 ENUM
2143   BFD_RELOC_ALPHA_BRSGP
2144 ENUMDOC
2145   Like BFD_RELOC_23_PCREL_S2, except that the source and target must
2146   share a common GP, and the target address is adjusted for
2147   STO_ALPHA_STD_GPLOAD.
2148
2149 ENUM
2150   BFD_RELOC_ALPHA_NOP
2151 ENUMDOC
2152   The NOP relocation outputs a NOP if the longword displacement
2153      between two procedure entry points is < 2^21.
2154
2155 ENUM
2156   BFD_RELOC_ALPHA_BSR
2157 ENUMDOC
2158   The BSR relocation outputs a BSR if the longword displacement
2159      between two procedure entry points is < 2^21.
2160
2161 ENUM
2162   BFD_RELOC_ALPHA_LDA
2163 ENUMDOC
2164   The LDA relocation outputs a LDA if the longword displacement
2165      between two procedure entry points is < 2^16.
2166
2167 ENUM
2168   BFD_RELOC_ALPHA_BOH
2169 ENUMDOC
2170   The BOH relocation outputs a BSR if the longword displacement
2171      between two procedure entry points is < 2^21, or else a hint.
2172
2173 ENUM
2174   BFD_RELOC_ALPHA_TLSGD
2175 ENUMX
2176   BFD_RELOC_ALPHA_TLSLDM
2177 ENUMX
2178   BFD_RELOC_ALPHA_DTPMOD64
2179 ENUMX
2180   BFD_RELOC_ALPHA_GOTDTPREL16
2181 ENUMX
2182   BFD_RELOC_ALPHA_DTPREL64
2183 ENUMX
2184   BFD_RELOC_ALPHA_DTPREL_HI16
2185 ENUMX
2186   BFD_RELOC_ALPHA_DTPREL_LO16
2187 ENUMX
2188   BFD_RELOC_ALPHA_DTPREL16
2189 ENUMX
2190   BFD_RELOC_ALPHA_GOTTPREL16
2191 ENUMX
2192   BFD_RELOC_ALPHA_TPREL64
2193 ENUMX
2194   BFD_RELOC_ALPHA_TPREL_HI16
2195 ENUMX
2196   BFD_RELOC_ALPHA_TPREL_LO16
2197 ENUMX
2198   BFD_RELOC_ALPHA_TPREL16
2199 ENUMDOC
2200   Alpha thread-local storage relocations.
2201
2202 ENUM
2203   BFD_RELOC_MIPS_JMP
2204 ENUMX
2205   BFD_RELOC_MICROMIPS_JMP
2206 ENUMDOC
2207   The MIPS jump instruction.
2208
2209 ENUM
2210   BFD_RELOC_MIPS16_JMP
2211 ENUMDOC
2212   The MIPS16 jump instruction.
2213
2214 ENUM
2215   BFD_RELOC_MIPS16_GPREL
2216 ENUMDOC
2217   MIPS16 GP relative reloc.
2218
2219 ENUM
2220   BFD_RELOC_HI16
2221 ENUMDOC
2222   High 16 bits of 32-bit value; simple reloc.
2223
2224 ENUM
2225   BFD_RELOC_HI16_S
2226 ENUMDOC
2227   High 16 bits of 32-bit value but the low 16 bits will be sign
2228      extended and added to form the final result.  If the low 16
2229      bits form a negative number, we need to add one to the high value
2230      to compensate for the borrow when the low bits are added.
2231
2232 ENUM
2233   BFD_RELOC_LO16
2234 ENUMDOC
2235   Low 16 bits.
2236
2237 ENUM
2238   BFD_RELOC_HI16_PCREL
2239 ENUMDOC
2240   High 16 bits of 32-bit pc-relative value
2241 ENUM
2242   BFD_RELOC_HI16_S_PCREL
2243 ENUMDOC
2244   High 16 bits of 32-bit pc-relative value, adjusted
2245 ENUM
2246   BFD_RELOC_LO16_PCREL
2247 ENUMDOC
2248   Low 16 bits of pc-relative value
2249
2250 ENUM
2251   BFD_RELOC_MIPS16_GOT16
2252 ENUMX
2253   BFD_RELOC_MIPS16_CALL16
2254 ENUMDOC
2255   Equivalent of BFD_RELOC_MIPS_*, but with the MIPS16 layout of
2256      16-bit immediate fields
2257 ENUM
2258   BFD_RELOC_MIPS16_HI16
2259 ENUMDOC
2260   MIPS16 high 16 bits of 32-bit value.
2261 ENUM
2262   BFD_RELOC_MIPS16_HI16_S
2263 ENUMDOC
2264   MIPS16 high 16 bits of 32-bit value but the low 16 bits will be sign
2265      extended and added to form the final result.  If the low 16
2266      bits form a negative number, we need to add one to the high value
2267      to compensate for the borrow when the low bits are added.
2268 ENUM
2269   BFD_RELOC_MIPS16_LO16
2270 ENUMDOC
2271   MIPS16 low 16 bits.
2272
2273 ENUM
2274   BFD_RELOC_MIPS16_TLS_GD
2275 ENUMX
2276   BFD_RELOC_MIPS16_TLS_LDM
2277 ENUMX
2278   BFD_RELOC_MIPS16_TLS_DTPREL_HI16
2279 ENUMX
2280   BFD_RELOC_MIPS16_TLS_DTPREL_LO16
2281 ENUMX
2282   BFD_RELOC_MIPS16_TLS_GOTTPREL
2283 ENUMX
2284   BFD_RELOC_MIPS16_TLS_TPREL_HI16
2285 ENUMX
2286   BFD_RELOC_MIPS16_TLS_TPREL_LO16
2287 ENUMDOC
2288   MIPS16 TLS relocations
2289
2290 ENUM
2291   BFD_RELOC_MIPS_LITERAL
2292 ENUMX
2293   BFD_RELOC_MICROMIPS_LITERAL
2294 ENUMDOC
2295   Relocation against a MIPS literal section.
2296
2297 ENUM
2298   BFD_RELOC_MICROMIPS_7_PCREL_S1
2299 ENUMX
2300   BFD_RELOC_MICROMIPS_10_PCREL_S1
2301 ENUMX
2302   BFD_RELOC_MICROMIPS_16_PCREL_S1
2303 ENUMDOC
2304   microMIPS PC-relative relocations.
2305
2306 ENUM
2307   BFD_RELOC_MIPS_21_PCREL_S2
2308 ENUMX
2309   BFD_RELOC_MIPS_26_PCREL_S2
2310 ENUMX
2311   BFD_RELOC_MIPS_18_PCREL_S3
2312 ENUMX
2313   BFD_RELOC_MIPS_19_PCREL_S2
2314 ENUMDOC
2315   MIPS PC-relative relocations.
2316
2317 ENUM
2318   BFD_RELOC_MICROMIPS_GPREL16
2319 ENUMX
2320   BFD_RELOC_MICROMIPS_HI16
2321 ENUMX
2322   BFD_RELOC_MICROMIPS_HI16_S
2323 ENUMX
2324   BFD_RELOC_MICROMIPS_LO16
2325 ENUMDOC
2326   microMIPS versions of generic BFD relocs.
2327
2328 ENUM
2329   BFD_RELOC_MIPS_GOT16
2330 ENUMX
2331   BFD_RELOC_MICROMIPS_GOT16
2332 ENUMX
2333   BFD_RELOC_MIPS_CALL16
2334 ENUMX
2335   BFD_RELOC_MICROMIPS_CALL16
2336 ENUMX
2337   BFD_RELOC_MIPS_GOT_HI16
2338 ENUMX
2339   BFD_RELOC_MICROMIPS_GOT_HI16
2340 ENUMX
2341   BFD_RELOC_MIPS_GOT_LO16
2342 ENUMX
2343   BFD_RELOC_MICROMIPS_GOT_LO16
2344 ENUMX
2345   BFD_RELOC_MIPS_CALL_HI16
2346 ENUMX
2347   BFD_RELOC_MICROMIPS_CALL_HI16
2348 ENUMX
2349   BFD_RELOC_MIPS_CALL_LO16
2350 ENUMX
2351   BFD_RELOC_MICROMIPS_CALL_LO16
2352 ENUMX
2353   BFD_RELOC_MIPS_SUB
2354 ENUMX
2355   BFD_RELOC_MICROMIPS_SUB
2356 ENUMX
2357   BFD_RELOC_MIPS_GOT_PAGE
2358 ENUMX
2359   BFD_RELOC_MICROMIPS_GOT_PAGE
2360 ENUMX
2361   BFD_RELOC_MIPS_GOT_OFST
2362 ENUMX
2363   BFD_RELOC_MICROMIPS_GOT_OFST
2364 ENUMX
2365   BFD_RELOC_MIPS_GOT_DISP
2366 ENUMX
2367   BFD_RELOC_MICROMIPS_GOT_DISP
2368 ENUMX
2369   BFD_RELOC_MIPS_SHIFT5
2370 ENUMX
2371   BFD_RELOC_MIPS_SHIFT6
2372 ENUMX
2373   BFD_RELOC_MIPS_INSERT_A
2374 ENUMX
2375   BFD_RELOC_MIPS_INSERT_B
2376 ENUMX
2377   BFD_RELOC_MIPS_DELETE
2378 ENUMX
2379   BFD_RELOC_MIPS_HIGHEST
2380 ENUMX
2381   BFD_RELOC_MICROMIPS_HIGHEST
2382 ENUMX
2383   BFD_RELOC_MIPS_HIGHER
2384 ENUMX
2385   BFD_RELOC_MICROMIPS_HIGHER
2386 ENUMX
2387   BFD_RELOC_MIPS_SCN_DISP
2388 ENUMX
2389   BFD_RELOC_MICROMIPS_SCN_DISP
2390 ENUMX
2391   BFD_RELOC_MIPS_REL16
2392 ENUMX
2393   BFD_RELOC_MIPS_RELGOT
2394 ENUMX
2395   BFD_RELOC_MIPS_JALR
2396 ENUMX
2397   BFD_RELOC_MICROMIPS_JALR
2398 ENUMX
2399   BFD_RELOC_MIPS_TLS_DTPMOD32
2400 ENUMX
2401   BFD_RELOC_MIPS_TLS_DTPREL32
2402 ENUMX
2403   BFD_RELOC_MIPS_TLS_DTPMOD64
2404 ENUMX
2405   BFD_RELOC_MIPS_TLS_DTPREL64
2406 ENUMX
2407   BFD_RELOC_MIPS_TLS_GD
2408 ENUMX
2409   BFD_RELOC_MICROMIPS_TLS_GD
2410 ENUMX
2411   BFD_RELOC_MIPS_TLS_LDM
2412 ENUMX
2413   BFD_RELOC_MICROMIPS_TLS_LDM
2414 ENUMX
2415   BFD_RELOC_MIPS_TLS_DTPREL_HI16
2416 ENUMX
2417   BFD_RELOC_MICROMIPS_TLS_DTPREL_HI16
2418 ENUMX
2419   BFD_RELOC_MIPS_TLS_DTPREL_LO16
2420 ENUMX
2421   BFD_RELOC_MICROMIPS_TLS_DTPREL_LO16
2422 ENUMX
2423   BFD_RELOC_MIPS_TLS_GOTTPREL
2424 ENUMX
2425   BFD_RELOC_MICROMIPS_TLS_GOTTPREL
2426 ENUMX
2427   BFD_RELOC_MIPS_TLS_TPREL32
2428 ENUMX
2429   BFD_RELOC_MIPS_TLS_TPREL64
2430 ENUMX
2431   BFD_RELOC_MIPS_TLS_TPREL_HI16
2432 ENUMX
2433   BFD_RELOC_MICROMIPS_TLS_TPREL_HI16
2434 ENUMX
2435   BFD_RELOC_MIPS_TLS_TPREL_LO16
2436 ENUMX
2437   BFD_RELOC_MICROMIPS_TLS_TPREL_LO16
2438 ENUMX
2439   BFD_RELOC_MIPS_EH
2440 ENUMDOC
2441   MIPS ELF relocations.
2442 COMMENT
2443
2444 ENUM
2445   BFD_RELOC_MIPS_COPY
2446 ENUMX
2447   BFD_RELOC_MIPS_JUMP_SLOT
2448 ENUMDOC
2449   MIPS ELF relocations (VxWorks and PLT extensions).
2450 COMMENT
2451
2452 ENUM
2453   BFD_RELOC_MOXIE_10_PCREL
2454 ENUMDOC
2455   Moxie ELF relocations.
2456 COMMENT
2457
2458 ENUM
2459   BFD_RELOC_FT32_10
2460 ENUMX
2461   BFD_RELOC_FT32_20
2462 ENUMX
2463   BFD_RELOC_FT32_17
2464 ENUMX
2465   BFD_RELOC_FT32_18
2466 ENUMDOC
2467   FT32 ELF relocations.
2468 COMMENT
2469
2470 ENUM
2471   BFD_RELOC_FRV_LABEL16
2472 ENUMX
2473   BFD_RELOC_FRV_LABEL24
2474 ENUMX
2475   BFD_RELOC_FRV_LO16
2476 ENUMX
2477   BFD_RELOC_FRV_HI16
2478 ENUMX
2479   BFD_RELOC_FRV_GPREL12
2480 ENUMX
2481   BFD_RELOC_FRV_GPRELU12
2482 ENUMX
2483   BFD_RELOC_FRV_GPREL32
2484 ENUMX
2485   BFD_RELOC_FRV_GPRELHI
2486 ENUMX
2487   BFD_RELOC_FRV_GPRELLO
2488 ENUMX
2489   BFD_RELOC_FRV_GOT12
2490 ENUMX
2491   BFD_RELOC_FRV_GOTHI
2492 ENUMX
2493   BFD_RELOC_FRV_GOTLO
2494 ENUMX
2495   BFD_RELOC_FRV_FUNCDESC
2496 ENUMX
2497   BFD_RELOC_FRV_FUNCDESC_GOT12
2498 ENUMX
2499   BFD_RELOC_FRV_FUNCDESC_GOTHI
2500 ENUMX
2501   BFD_RELOC_FRV_FUNCDESC_GOTLO
2502 ENUMX
2503   BFD_RELOC_FRV_FUNCDESC_VALUE
2504 ENUMX
2505   BFD_RELOC_FRV_FUNCDESC_GOTOFF12
2506 ENUMX
2507   BFD_RELOC_FRV_FUNCDESC_GOTOFFHI
2508 ENUMX
2509   BFD_RELOC_FRV_FUNCDESC_GOTOFFLO
2510 ENUMX
2511   BFD_RELOC_FRV_GOTOFF12
2512 ENUMX
2513   BFD_RELOC_FRV_GOTOFFHI
2514 ENUMX
2515   BFD_RELOC_FRV_GOTOFFLO
2516 ENUMX
2517   BFD_RELOC_FRV_GETTLSOFF
2518 ENUMX
2519   BFD_RELOC_FRV_TLSDESC_VALUE
2520 ENUMX
2521   BFD_RELOC_FRV_GOTTLSDESC12
2522 ENUMX
2523   BFD_RELOC_FRV_GOTTLSDESCHI
2524 ENUMX
2525   BFD_RELOC_FRV_GOTTLSDESCLO
2526 ENUMX
2527   BFD_RELOC_FRV_TLSMOFF12
2528 ENUMX
2529   BFD_RELOC_FRV_TLSMOFFHI
2530 ENUMX
2531   BFD_RELOC_FRV_TLSMOFFLO
2532 ENUMX
2533   BFD_RELOC_FRV_GOTTLSOFF12
2534 ENUMX
2535   BFD_RELOC_FRV_GOTTLSOFFHI
2536 ENUMX
2537   BFD_RELOC_FRV_GOTTLSOFFLO
2538 ENUMX
2539   BFD_RELOC_FRV_TLSOFF
2540 ENUMX
2541   BFD_RELOC_FRV_TLSDESC_RELAX
2542 ENUMX
2543   BFD_RELOC_FRV_GETTLSOFF_RELAX
2544 ENUMX
2545   BFD_RELOC_FRV_TLSOFF_RELAX
2546 ENUMX
2547   BFD_RELOC_FRV_TLSMOFF
2548 ENUMDOC
2549   Fujitsu Frv Relocations.
2550 COMMENT
2551
2552 ENUM
2553   BFD_RELOC_MN10300_GOTOFF24
2554 ENUMDOC
2555   This is a 24bit GOT-relative reloc for the mn10300.
2556 ENUM
2557   BFD_RELOC_MN10300_GOT32
2558 ENUMDOC
2559   This is a 32bit GOT-relative reloc for the mn10300, offset by two bytes
2560   in the instruction.
2561 ENUM
2562   BFD_RELOC_MN10300_GOT24
2563 ENUMDOC
2564   This is a 24bit GOT-relative reloc for the mn10300, offset by two bytes
2565   in the instruction.
2566 ENUM
2567   BFD_RELOC_MN10300_GOT16
2568 ENUMDOC
2569   This is a 16bit GOT-relative reloc for the mn10300, offset by two bytes
2570   in the instruction.
2571 ENUM
2572   BFD_RELOC_MN10300_COPY
2573 ENUMDOC
2574   Copy symbol at runtime.
2575 ENUM
2576   BFD_RELOC_MN10300_GLOB_DAT
2577 ENUMDOC
2578   Create GOT entry.
2579 ENUM
2580   BFD_RELOC_MN10300_JMP_SLOT
2581 ENUMDOC
2582   Create PLT entry.
2583 ENUM
2584   BFD_RELOC_MN10300_RELATIVE
2585 ENUMDOC
2586   Adjust by program base.
2587 ENUM
2588   BFD_RELOC_MN10300_SYM_DIFF
2589 ENUMDOC
2590   Together with another reloc targeted at the same location,
2591   allows for a value that is the difference of two symbols
2592   in the same section.
2593 ENUM
2594   BFD_RELOC_MN10300_ALIGN
2595 ENUMDOC
2596   The addend of this reloc is an alignment power that must
2597   be honoured at the offset's location, regardless of linker
2598   relaxation.
2599 ENUM
2600   BFD_RELOC_MN10300_TLS_GD
2601 ENUMX
2602   BFD_RELOC_MN10300_TLS_LD
2603 ENUMX
2604   BFD_RELOC_MN10300_TLS_LDO
2605 ENUMX
2606   BFD_RELOC_MN10300_TLS_GOTIE
2607 ENUMX
2608   BFD_RELOC_MN10300_TLS_IE
2609 ENUMX
2610   BFD_RELOC_MN10300_TLS_LE
2611 ENUMX
2612   BFD_RELOC_MN10300_TLS_DTPMOD
2613 ENUMX
2614   BFD_RELOC_MN10300_TLS_DTPOFF
2615 ENUMX
2616   BFD_RELOC_MN10300_TLS_TPOFF
2617 ENUMDOC
2618   Various TLS-related relocations.
2619 ENUM
2620   BFD_RELOC_MN10300_32_PCREL
2621 ENUMDOC
2622   This is a 32bit pcrel reloc for the mn10300, offset by two bytes in the
2623   instruction.
2624 ENUM
2625   BFD_RELOC_MN10300_16_PCREL
2626 ENUMDOC
2627   This is a 16bit pcrel reloc for the mn10300, offset by two bytes in the
2628   instruction.
2629 COMMENT
2630
2631 ENUM
2632   BFD_RELOC_386_GOT32
2633 ENUMX
2634   BFD_RELOC_386_PLT32
2635 ENUMX
2636   BFD_RELOC_386_COPY
2637 ENUMX
2638   BFD_RELOC_386_GLOB_DAT
2639 ENUMX
2640   BFD_RELOC_386_JUMP_SLOT
2641 ENUMX
2642   BFD_RELOC_386_RELATIVE
2643 ENUMX
2644   BFD_RELOC_386_GOTOFF
2645 ENUMX
2646   BFD_RELOC_386_GOTPC
2647 ENUMX
2648   BFD_RELOC_386_TLS_TPOFF
2649 ENUMX
2650   BFD_RELOC_386_TLS_IE
2651 ENUMX
2652   BFD_RELOC_386_TLS_GOTIE
2653 ENUMX
2654   BFD_RELOC_386_TLS_LE
2655 ENUMX
2656   BFD_RELOC_386_TLS_GD
2657 ENUMX
2658   BFD_RELOC_386_TLS_LDM
2659 ENUMX
2660   BFD_RELOC_386_TLS_LDO_32
2661 ENUMX
2662   BFD_RELOC_386_TLS_IE_32
2663 ENUMX
2664   BFD_RELOC_386_TLS_LE_32
2665 ENUMX
2666   BFD_RELOC_386_TLS_DTPMOD32
2667 ENUMX
2668   BFD_RELOC_386_TLS_DTPOFF32
2669 ENUMX
2670   BFD_RELOC_386_TLS_TPOFF32
2671 ENUMX
2672   BFD_RELOC_386_TLS_GOTDESC
2673 ENUMX
2674   BFD_RELOC_386_TLS_DESC_CALL
2675 ENUMX
2676   BFD_RELOC_386_TLS_DESC
2677 ENUMX
2678   BFD_RELOC_386_IRELATIVE
2679 ENUMDOC
2680   i386/elf relocations
2681
2682 ENUM
2683   BFD_RELOC_X86_64_GOT32
2684 ENUMX
2685   BFD_RELOC_X86_64_PLT32
2686 ENUMX
2687   BFD_RELOC_X86_64_COPY
2688 ENUMX
2689   BFD_RELOC_X86_64_GLOB_DAT
2690 ENUMX
2691   BFD_RELOC_X86_64_JUMP_SLOT
2692 ENUMX
2693   BFD_RELOC_X86_64_RELATIVE
2694 ENUMX
2695   BFD_RELOC_X86_64_GOTPCREL
2696 ENUMX
2697   BFD_RELOC_X86_64_32S
2698 ENUMX
2699   BFD_RELOC_X86_64_DTPMOD64
2700 ENUMX
2701   BFD_RELOC_X86_64_DTPOFF64
2702 ENUMX
2703   BFD_RELOC_X86_64_TPOFF64
2704 ENUMX
2705   BFD_RELOC_X86_64_TLSGD
2706 ENUMX
2707   BFD_RELOC_X86_64_TLSLD
2708 ENUMX
2709   BFD_RELOC_X86_64_DTPOFF32
2710 ENUMX
2711   BFD_RELOC_X86_64_GOTTPOFF
2712 ENUMX
2713   BFD_RELOC_X86_64_TPOFF32
2714 ENUMX
2715   BFD_RELOC_X86_64_GOTOFF64
2716 ENUMX
2717   BFD_RELOC_X86_64_GOTPC32
2718 ENUMX
2719   BFD_RELOC_X86_64_GOT64
2720 ENUMX
2721   BFD_RELOC_X86_64_GOTPCREL64
2722 ENUMX
2723   BFD_RELOC_X86_64_GOTPC64
2724 ENUMX
2725   BFD_RELOC_X86_64_GOTPLT64
2726 ENUMX
2727   BFD_RELOC_X86_64_PLTOFF64
2728 ENUMX
2729   BFD_RELOC_X86_64_GOTPC32_TLSDESC
2730 ENUMX
2731   BFD_RELOC_X86_64_TLSDESC_CALL
2732 ENUMX
2733   BFD_RELOC_X86_64_TLSDESC
2734 ENUMX
2735   BFD_RELOC_X86_64_IRELATIVE
2736 ENUMX
2737   BFD_RELOC_X86_64_PC32_BND
2738 ENUMX
2739   BFD_RELOC_X86_64_PLT32_BND
2740 ENUMDOC
2741   x86-64/elf relocations
2742
2743 ENUM
2744   BFD_RELOC_NS32K_IMM_8
2745 ENUMX
2746   BFD_RELOC_NS32K_IMM_16
2747 ENUMX
2748   BFD_RELOC_NS32K_IMM_32
2749 ENUMX
2750   BFD_RELOC_NS32K_IMM_8_PCREL
2751 ENUMX
2752   BFD_RELOC_NS32K_IMM_16_PCREL
2753 ENUMX
2754   BFD_RELOC_NS32K_IMM_32_PCREL
2755 ENUMX
2756   BFD_RELOC_NS32K_DISP_8
2757 ENUMX
2758   BFD_RELOC_NS32K_DISP_16
2759 ENUMX
2760   BFD_RELOC_NS32K_DISP_32
2761 ENUMX
2762   BFD_RELOC_NS32K_DISP_8_PCREL
2763 ENUMX
2764   BFD_RELOC_NS32K_DISP_16_PCREL
2765 ENUMX
2766   BFD_RELOC_NS32K_DISP_32_PCREL
2767 ENUMDOC
2768   ns32k relocations
2769
2770 ENUM
2771   BFD_RELOC_PDP11_DISP_8_PCREL
2772 ENUMX
2773   BFD_RELOC_PDP11_DISP_6_PCREL
2774 ENUMDOC
2775   PDP11 relocations
2776
2777 ENUM
2778   BFD_RELOC_PJ_CODE_HI16
2779 ENUMX
2780   BFD_RELOC_PJ_CODE_LO16
2781 ENUMX
2782   BFD_RELOC_PJ_CODE_DIR16
2783 ENUMX
2784   BFD_RELOC_PJ_CODE_DIR32
2785 ENUMX
2786   BFD_RELOC_PJ_CODE_REL16
2787 ENUMX
2788   BFD_RELOC_PJ_CODE_REL32
2789 ENUMDOC
2790   Picojava relocs.  Not all of these appear in object files.
2791
2792 ENUM
2793   BFD_RELOC_PPC_B26
2794 ENUMX
2795   BFD_RELOC_PPC_BA26
2796 ENUMX
2797   BFD_RELOC_PPC_TOC16
2798 ENUMX
2799   BFD_RELOC_PPC_B16
2800 ENUMX
2801   BFD_RELOC_PPC_B16_BRTAKEN
2802 ENUMX
2803   BFD_RELOC_PPC_B16_BRNTAKEN
2804 ENUMX
2805   BFD_RELOC_PPC_BA16
2806 ENUMX
2807   BFD_RELOC_PPC_BA16_BRTAKEN
2808 ENUMX
2809   BFD_RELOC_PPC_BA16_BRNTAKEN
2810 ENUMX
2811   BFD_RELOC_PPC_COPY
2812 ENUMX
2813   BFD_RELOC_PPC_GLOB_DAT
2814 ENUMX
2815   BFD_RELOC_PPC_JMP_SLOT
2816 ENUMX
2817   BFD_RELOC_PPC_RELATIVE
2818 ENUMX
2819   BFD_RELOC_PPC_LOCAL24PC
2820 ENUMX
2821   BFD_RELOC_PPC_EMB_NADDR32
2822 ENUMX
2823   BFD_RELOC_PPC_EMB_NADDR16
2824 ENUMX
2825   BFD_RELOC_PPC_EMB_NADDR16_LO
2826 ENUMX
2827   BFD_RELOC_PPC_EMB_NADDR16_HI
2828 ENUMX
2829   BFD_RELOC_PPC_EMB_NADDR16_HA
2830 ENUMX
2831   BFD_RELOC_PPC_EMB_SDAI16
2832 ENUMX
2833   BFD_RELOC_PPC_EMB_SDA2I16
2834 ENUMX
2835   BFD_RELOC_PPC_EMB_SDA2REL
2836 ENUMX
2837   BFD_RELOC_PPC_EMB_SDA21
2838 ENUMX
2839   BFD_RELOC_PPC_EMB_MRKREF
2840 ENUMX
2841   BFD_RELOC_PPC_EMB_RELSEC16
2842 ENUMX
2843   BFD_RELOC_PPC_EMB_RELST_LO
2844 ENUMX
2845   BFD_RELOC_PPC_EMB_RELST_HI
2846 ENUMX
2847   BFD_RELOC_PPC_EMB_RELST_HA
2848 ENUMX
2849   BFD_RELOC_PPC_EMB_BIT_FLD
2850 ENUMX
2851   BFD_RELOC_PPC_EMB_RELSDA
2852 ENUMX
2853   BFD_RELOC_PPC_VLE_REL8
2854 ENUMX
2855   BFD_RELOC_PPC_VLE_REL15
2856 ENUMX
2857   BFD_RELOC_PPC_VLE_REL24
2858 ENUMX
2859   BFD_RELOC_PPC_VLE_LO16A
2860 ENUMX
2861   BFD_RELOC_PPC_VLE_LO16D
2862 ENUMX
2863   BFD_RELOC_PPC_VLE_HI16A
2864 ENUMX
2865   BFD_RELOC_PPC_VLE_HI16D
2866 ENUMX
2867   BFD_RELOC_PPC_VLE_HA16A
2868 ENUMX
2869   BFD_RELOC_PPC_VLE_HA16D
2870 ENUMX
2871   BFD_RELOC_PPC_VLE_SDA21
2872 ENUMX
2873   BFD_RELOC_PPC_VLE_SDA21_LO
2874 ENUMX
2875   BFD_RELOC_PPC_VLE_SDAREL_LO16A
2876 ENUMX
2877   BFD_RELOC_PPC_VLE_SDAREL_LO16D
2878 ENUMX
2879   BFD_RELOC_PPC_VLE_SDAREL_HI16A
2880 ENUMX
2881   BFD_RELOC_PPC_VLE_SDAREL_HI16D
2882 ENUMX
2883   BFD_RELOC_PPC_VLE_SDAREL_HA16A
2884 ENUMX
2885   BFD_RELOC_PPC_VLE_SDAREL_HA16D
2886 ENUMX
2887   BFD_RELOC_PPC64_HIGHER
2888 ENUMX
2889   BFD_RELOC_PPC64_HIGHER_S
2890 ENUMX
2891   BFD_RELOC_PPC64_HIGHEST
2892 ENUMX
2893   BFD_RELOC_PPC64_HIGHEST_S
2894 ENUMX
2895   BFD_RELOC_PPC64_TOC16_LO
2896 ENUMX
2897   BFD_RELOC_PPC64_TOC16_HI
2898 ENUMX
2899   BFD_RELOC_PPC64_TOC16_HA
2900 ENUMX
2901   BFD_RELOC_PPC64_TOC
2902 ENUMX
2903   BFD_RELOC_PPC64_PLTGOT16
2904 ENUMX
2905   BFD_RELOC_PPC64_PLTGOT16_LO
2906 ENUMX
2907   BFD_RELOC_PPC64_PLTGOT16_HI
2908 ENUMX
2909   BFD_RELOC_PPC64_PLTGOT16_HA
2910 ENUMX
2911   BFD_RELOC_PPC64_ADDR16_DS
2912 ENUMX
2913   BFD_RELOC_PPC64_ADDR16_LO_DS
2914 ENUMX
2915   BFD_RELOC_PPC64_GOT16_DS
2916 ENUMX
2917   BFD_RELOC_PPC64_GOT16_LO_DS
2918 ENUMX
2919   BFD_RELOC_PPC64_PLT16_LO_DS
2920 ENUMX
2921   BFD_RELOC_PPC64_SECTOFF_DS
2922 ENUMX
2923   BFD_RELOC_PPC64_SECTOFF_LO_DS
2924 ENUMX
2925   BFD_RELOC_PPC64_TOC16_DS
2926 ENUMX
2927   BFD_RELOC_PPC64_TOC16_LO_DS
2928 ENUMX
2929   BFD_RELOC_PPC64_PLTGOT16_DS
2930 ENUMX
2931   BFD_RELOC_PPC64_PLTGOT16_LO_DS
2932 ENUMX
2933   BFD_RELOC_PPC64_ADDR16_HIGH
2934 ENUMX
2935   BFD_RELOC_PPC64_ADDR16_HIGHA
2936 ENUMX
2937   BFD_RELOC_PPC64_ADDR64_LOCAL
2938 ENUMDOC
2939   Power(rs6000) and PowerPC relocations.
2940
2941 ENUM
2942   BFD_RELOC_PPC_TLS
2943 ENUMX
2944   BFD_RELOC_PPC_TLSGD
2945 ENUMX
2946   BFD_RELOC_PPC_TLSLD
2947 ENUMX
2948   BFD_RELOC_PPC_DTPMOD
2949 ENUMX
2950   BFD_RELOC_PPC_TPREL16
2951 ENUMX
2952   BFD_RELOC_PPC_TPREL16_LO
2953 ENUMX
2954   BFD_RELOC_PPC_TPREL16_HI
2955 ENUMX
2956   BFD_RELOC_PPC_TPREL16_HA
2957 ENUMX
2958   BFD_RELOC_PPC_TPREL
2959 ENUMX
2960   BFD_RELOC_PPC_DTPREL16
2961 ENUMX
2962   BFD_RELOC_PPC_DTPREL16_LO
2963 ENUMX
2964   BFD_RELOC_PPC_DTPREL16_HI
2965 ENUMX
2966   BFD_RELOC_PPC_DTPREL16_HA
2967 ENUMX
2968   BFD_RELOC_PPC_DTPREL
2969 ENUMX
2970   BFD_RELOC_PPC_GOT_TLSGD16
2971 ENUMX
2972   BFD_RELOC_PPC_GOT_TLSGD16_LO
2973 ENUMX
2974   BFD_RELOC_PPC_GOT_TLSGD16_HI
2975 ENUMX
2976   BFD_RELOC_PPC_GOT_TLSGD16_HA
2977 ENUMX
2978   BFD_RELOC_PPC_GOT_TLSLD16
2979 ENUMX
2980   BFD_RELOC_PPC_GOT_TLSLD16_LO
2981 ENUMX
2982   BFD_RELOC_PPC_GOT_TLSLD16_HI
2983 ENUMX
2984   BFD_RELOC_PPC_GOT_TLSLD16_HA
2985 ENUMX
2986   BFD_RELOC_PPC_GOT_TPREL16
2987 ENUMX
2988   BFD_RELOC_PPC_GOT_TPREL16_LO
2989 ENUMX
2990   BFD_RELOC_PPC_GOT_TPREL16_HI
2991 ENUMX
2992   BFD_RELOC_PPC_GOT_TPREL16_HA
2993 ENUMX
2994   BFD_RELOC_PPC_GOT_DTPREL16
2995 ENUMX
2996   BFD_RELOC_PPC_GOT_DTPREL16_LO
2997 ENUMX
2998   BFD_RELOC_PPC_GOT_DTPREL16_HI
2999 ENUMX
3000   BFD_RELOC_PPC_GOT_DTPREL16_HA
3001 ENUMX
3002   BFD_RELOC_PPC64_TPREL16_DS
3003 ENUMX
3004   BFD_RELOC_PPC64_TPREL16_LO_DS
3005 ENUMX
3006   BFD_RELOC_PPC64_TPREL16_HIGHER
3007 ENUMX
3008   BFD_RELOC_PPC64_TPREL16_HIGHERA
3009 ENUMX
3010   BFD_RELOC_PPC64_TPREL16_HIGHEST
3011 ENUMX
3012   BFD_RELOC_PPC64_TPREL16_HIGHESTA
3013 ENUMX
3014   BFD_RELOC_PPC64_DTPREL16_DS
3015 ENUMX
3016   BFD_RELOC_PPC64_DTPREL16_LO_DS
3017 ENUMX
3018   BFD_RELOC_PPC64_DTPREL16_HIGHER
3019 ENUMX
3020   BFD_RELOC_PPC64_DTPREL16_HIGHERA
3021 ENUMX
3022   BFD_RELOC_PPC64_DTPREL16_HIGHEST
3023 ENUMX
3024   BFD_RELOC_PPC64_DTPREL16_HIGHESTA
3025 ENUMX
3026   BFD_RELOC_PPC64_TPREL16_HIGH
3027 ENUMX
3028   BFD_RELOC_PPC64_TPREL16_HIGHA
3029 ENUMX
3030   BFD_RELOC_PPC64_DTPREL16_HIGH
3031 ENUMX
3032   BFD_RELOC_PPC64_DTPREL16_HIGHA
3033 ENUMDOC
3034   PowerPC and PowerPC64 thread-local storage relocations.
3035
3036 ENUM
3037   BFD_RELOC_I370_D12
3038 ENUMDOC
3039   IBM 370/390 relocations
3040
3041 ENUM
3042   BFD_RELOC_CTOR
3043 ENUMDOC
3044   The type of reloc used to build a constructor table - at the moment
3045   probably a 32 bit wide absolute relocation, but the target can choose.
3046   It generally does map to one of the other relocation types.
3047
3048 ENUM
3049   BFD_RELOC_ARM_PCREL_BRANCH
3050 ENUMDOC
3051   ARM 26 bit pc-relative branch.  The lowest two bits must be zero and are
3052   not stored in the instruction.
3053 ENUM
3054   BFD_RELOC_ARM_PCREL_BLX
3055 ENUMDOC
3056   ARM 26 bit pc-relative branch.  The lowest bit must be zero and is
3057   not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
3058   field in the instruction.
3059 ENUM
3060   BFD_RELOC_THUMB_PCREL_BLX
3061 ENUMDOC
3062   Thumb 22 bit pc-relative branch.  The lowest bit must be zero and is
3063   not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
3064   field in the instruction.
3065 ENUM
3066   BFD_RELOC_ARM_PCREL_CALL
3067 ENUMDOC
3068   ARM 26-bit pc-relative branch for an unconditional BL or BLX instruction.
3069 ENUM
3070   BFD_RELOC_ARM_PCREL_JUMP
3071 ENUMDOC
3072   ARM 26-bit pc-relative branch for B or conditional BL instruction.
3073
3074 ENUM
3075   BFD_RELOC_THUMB_PCREL_BRANCH7
3076 ENUMX
3077   BFD_RELOC_THUMB_PCREL_BRANCH9
3078 ENUMX
3079   BFD_RELOC_THUMB_PCREL_BRANCH12
3080 ENUMX
3081   BFD_RELOC_THUMB_PCREL_BRANCH20
3082 ENUMX
3083   BFD_RELOC_THUMB_PCREL_BRANCH23
3084 ENUMX
3085   BFD_RELOC_THUMB_PCREL_BRANCH25
3086 ENUMDOC
3087   Thumb 7-, 9-, 12-, 20-, 23-, and 25-bit pc-relative branches.
3088   The lowest bit must be zero and is not stored in the instruction.
3089   Note that the corresponding ELF R_ARM_THM_JUMPnn constant has an
3090   "nn" one smaller in all cases.  Note further that BRANCH23
3091   corresponds to R_ARM_THM_CALL.
3092
3093 ENUM
3094   BFD_RELOC_ARM_OFFSET_IMM
3095 ENUMDOC
3096   12-bit immediate offset, used in ARM-format ldr and str instructions.
3097
3098 ENUM
3099   BFD_RELOC_ARM_THUMB_OFFSET
3100 ENUMDOC
3101   5-bit immediate offset, used in Thumb-format ldr and str instructions.
3102
3103 ENUM
3104   BFD_RELOC_ARM_TARGET1
3105 ENUMDOC
3106   Pc-relative or absolute relocation depending on target.  Used for
3107   entries in .init_array sections.
3108 ENUM
3109   BFD_RELOC_ARM_ROSEGREL32
3110 ENUMDOC
3111   Read-only segment base relative address.
3112 ENUM
3113   BFD_RELOC_ARM_SBREL32
3114 ENUMDOC
3115   Data segment base relative address.
3116 ENUM
3117   BFD_RELOC_ARM_TARGET2
3118 ENUMDOC
3119   This reloc is used for references to RTTI data from exception handling
3120   tables.  The actual definition depends on the target.  It may be a
3121   pc-relative or some form of GOT-indirect relocation.
3122 ENUM
3123   BFD_RELOC_ARM_PREL31
3124 ENUMDOC
3125   31-bit PC relative address.
3126 ENUM
3127   BFD_RELOC_ARM_MOVW
3128 ENUMX
3129   BFD_RELOC_ARM_MOVT
3130 ENUMX
3131   BFD_RELOC_ARM_MOVW_PCREL
3132 ENUMX
3133   BFD_RELOC_ARM_MOVT_PCREL
3134 ENUMX
3135   BFD_RELOC_ARM_THUMB_MOVW
3136 ENUMX
3137   BFD_RELOC_ARM_THUMB_MOVT
3138 ENUMX
3139   BFD_RELOC_ARM_THUMB_MOVW_PCREL
3140 ENUMX
3141   BFD_RELOC_ARM_THUMB_MOVT_PCREL
3142 ENUMDOC
3143   Low and High halfword relocations for MOVW and MOVT instructions.
3144
3145 ENUM
3146   BFD_RELOC_ARM_JUMP_SLOT
3147 ENUMX
3148   BFD_RELOC_ARM_GLOB_DAT
3149 ENUMX
3150   BFD_RELOC_ARM_GOT32
3151 ENUMX
3152   BFD_RELOC_ARM_PLT32
3153 ENUMX
3154   BFD_RELOC_ARM_RELATIVE
3155 ENUMX
3156   BFD_RELOC_ARM_GOTOFF
3157 ENUMX
3158   BFD_RELOC_ARM_GOTPC
3159 ENUMX
3160   BFD_RELOC_ARM_GOT_PREL
3161 ENUMDOC
3162   Relocations for setting up GOTs and PLTs for shared libraries.
3163
3164 ENUM
3165   BFD_RELOC_ARM_TLS_GD32
3166 ENUMX
3167   BFD_RELOC_ARM_TLS_LDO32
3168 ENUMX
3169   BFD_RELOC_ARM_TLS_LDM32
3170 ENUMX
3171   BFD_RELOC_ARM_TLS_DTPOFF32
3172 ENUMX
3173   BFD_RELOC_ARM_TLS_DTPMOD32
3174 ENUMX
3175   BFD_RELOC_ARM_TLS_TPOFF32
3176 ENUMX
3177   BFD_RELOC_ARM_TLS_IE32
3178 ENUMX
3179   BFD_RELOC_ARM_TLS_LE32
3180 ENUMX
3181   BFD_RELOC_ARM_TLS_GOTDESC
3182 ENUMX
3183   BFD_RELOC_ARM_TLS_CALL
3184 ENUMX
3185   BFD_RELOC_ARM_THM_TLS_CALL
3186 ENUMX
3187   BFD_RELOC_ARM_TLS_DESCSEQ
3188 ENUMX
3189   BFD_RELOC_ARM_THM_TLS_DESCSEQ
3190 ENUMX
3191   BFD_RELOC_ARM_TLS_DESC
3192 ENUMDOC
3193   ARM thread-local storage relocations.
3194
3195 ENUM
3196   BFD_RELOC_ARM_ALU_PC_G0_NC
3197 ENUMX
3198   BFD_RELOC_ARM_ALU_PC_G0
3199 ENUMX
3200   BFD_RELOC_ARM_ALU_PC_G1_NC
3201 ENUMX
3202   BFD_RELOC_ARM_ALU_PC_G1
3203 ENUMX
3204   BFD_RELOC_ARM_ALU_PC_G2
3205 ENUMX
3206   BFD_RELOC_ARM_LDR_PC_G0
3207 ENUMX
3208   BFD_RELOC_ARM_LDR_PC_G1
3209 ENUMX
3210   BFD_RELOC_ARM_LDR_PC_G2
3211 ENUMX
3212   BFD_RELOC_ARM_LDRS_PC_G0
3213 ENUMX
3214   BFD_RELOC_ARM_LDRS_PC_G1
3215 ENUMX
3216   BFD_RELOC_ARM_LDRS_PC_G2
3217 ENUMX
3218   BFD_RELOC_ARM_LDC_PC_G0
3219 ENUMX
3220   BFD_RELOC_ARM_LDC_PC_G1
3221 ENUMX
3222   BFD_RELOC_ARM_LDC_PC_G2
3223 ENUMX
3224   BFD_RELOC_ARM_ALU_SB_G0_NC
3225 ENUMX
3226   BFD_RELOC_ARM_ALU_SB_G0
3227 ENUMX
3228   BFD_RELOC_ARM_ALU_SB_G1_NC
3229 ENUMX
3230   BFD_RELOC_ARM_ALU_SB_G1
3231 ENUMX
3232   BFD_RELOC_ARM_ALU_SB_G2
3233 ENUMX
3234   BFD_RELOC_ARM_LDR_SB_G0
3235 ENUMX
3236   BFD_RELOC_ARM_LDR_SB_G1
3237 ENUMX
3238   BFD_RELOC_ARM_LDR_SB_G2
3239 ENUMX
3240   BFD_RELOC_ARM_LDRS_SB_G0
3241 ENUMX
3242   BFD_RELOC_ARM_LDRS_SB_G1
3243 ENUMX
3244   BFD_RELOC_ARM_LDRS_SB_G2
3245 ENUMX
3246   BFD_RELOC_ARM_LDC_SB_G0
3247 ENUMX
3248   BFD_RELOC_ARM_LDC_SB_G1
3249 ENUMX
3250   BFD_RELOC_ARM_LDC_SB_G2
3251 ENUMDOC
3252   ARM group relocations.
3253
3254 ENUM
3255   BFD_RELOC_ARM_V4BX
3256 ENUMDOC
3257   Annotation of BX instructions.
3258
3259 ENUM
3260   BFD_RELOC_ARM_IRELATIVE
3261 ENUMDOC
3262   ARM support for STT_GNU_IFUNC.
3263
3264 ENUM
3265   BFD_RELOC_ARM_IMMEDIATE
3266 ENUMX
3267   BFD_RELOC_ARM_ADRL_IMMEDIATE
3268 ENUMX
3269   BFD_RELOC_ARM_T32_IMMEDIATE
3270 ENUMX
3271   BFD_RELOC_ARM_T32_ADD_IMM
3272 ENUMX
3273   BFD_RELOC_ARM_T32_IMM12
3274 ENUMX
3275   BFD_RELOC_ARM_T32_ADD_PC12
3276 ENUMX
3277   BFD_RELOC_ARM_SHIFT_IMM
3278 ENUMX
3279   BFD_RELOC_ARM_SMC
3280 ENUMX
3281   BFD_RELOC_ARM_HVC
3282 ENUMX
3283   BFD_RELOC_ARM_SWI
3284 ENUMX
3285   BFD_RELOC_ARM_MULTI
3286 ENUMX
3287   BFD_RELOC_ARM_CP_OFF_IMM
3288 ENUMX
3289   BFD_RELOC_ARM_CP_OFF_IMM_S2
3290 ENUMX
3291   BFD_RELOC_ARM_T32_CP_OFF_IMM
3292 ENUMX
3293   BFD_RELOC_ARM_T32_CP_OFF_IMM_S2
3294 ENUMX
3295   BFD_RELOC_ARM_ADR_IMM
3296 ENUMX
3297   BFD_RELOC_ARM_LDR_IMM
3298 ENUMX
3299   BFD_RELOC_ARM_LITERAL
3300 ENUMX
3301   BFD_RELOC_ARM_IN_POOL
3302 ENUMX
3303   BFD_RELOC_ARM_OFFSET_IMM8
3304 ENUMX
3305   BFD_RELOC_ARM_T32_OFFSET_U8
3306 ENUMX
3307   BFD_RELOC_ARM_T32_OFFSET_IMM
3308 ENUMX
3309   BFD_RELOC_ARM_HWLITERAL
3310 ENUMX
3311   BFD_RELOC_ARM_THUMB_ADD
3312 ENUMX
3313   BFD_RELOC_ARM_THUMB_IMM
3314 ENUMX
3315   BFD_RELOC_ARM_THUMB_SHIFT
3316 ENUMDOC
3317   These relocs are only used within the ARM assembler.  They are not
3318   (at present) written to any object files.
3319
3320 ENUM
3321   BFD_RELOC_SH_PCDISP8BY2
3322 ENUMX
3323   BFD_RELOC_SH_PCDISP12BY2
3324 ENUMX
3325   BFD_RELOC_SH_IMM3
3326 ENUMX
3327   BFD_RELOC_SH_IMM3U
3328 ENUMX
3329   BFD_RELOC_SH_DISP12
3330 ENUMX
3331   BFD_RELOC_SH_DISP12BY2
3332 ENUMX
3333   BFD_RELOC_SH_DISP12BY4
3334 ENUMX
3335   BFD_RELOC_SH_DISP12BY8
3336 ENUMX
3337   BFD_RELOC_SH_DISP20
3338 ENUMX
3339   BFD_RELOC_SH_DISP20BY8
3340 ENUMX
3341   BFD_RELOC_SH_IMM4
3342 ENUMX
3343   BFD_RELOC_SH_IMM4BY2
3344 ENUMX
3345   BFD_RELOC_SH_IMM4BY4
3346 ENUMX
3347   BFD_RELOC_SH_IMM8
3348 ENUMX
3349   BFD_RELOC_SH_IMM8BY2
3350 ENUMX
3351   BFD_RELOC_SH_IMM8BY4
3352 ENUMX
3353   BFD_RELOC_SH_PCRELIMM8BY2
3354 ENUMX
3355   BFD_RELOC_SH_PCRELIMM8BY4
3356 ENUMX
3357   BFD_RELOC_SH_SWITCH16
3358 ENUMX
3359   BFD_RELOC_SH_SWITCH32
3360 ENUMX
3361   BFD_RELOC_SH_USES
3362 ENUMX
3363   BFD_RELOC_SH_COUNT
3364 ENUMX
3365   BFD_RELOC_SH_ALIGN
3366 ENUMX
3367   BFD_RELOC_SH_CODE
3368 ENUMX
3369   BFD_RELOC_SH_DATA
3370 ENUMX
3371   BFD_RELOC_SH_LABEL
3372 ENUMX
3373   BFD_RELOC_SH_LOOP_START
3374 ENUMX
3375   BFD_RELOC_SH_LOOP_END
3376 ENUMX
3377   BFD_RELOC_SH_COPY
3378 ENUMX
3379   BFD_RELOC_SH_GLOB_DAT
3380 ENUMX
3381   BFD_RELOC_SH_JMP_SLOT
3382 ENUMX
3383   BFD_RELOC_SH_RELATIVE
3384 ENUMX
3385   BFD_RELOC_SH_GOTPC
3386 ENUMX
3387   BFD_RELOC_SH_GOT_LOW16
3388 ENUMX
3389   BFD_RELOC_SH_GOT_MEDLOW16
3390 ENUMX
3391   BFD_RELOC_SH_GOT_MEDHI16
3392 ENUMX
3393   BFD_RELOC_SH_GOT_HI16
3394 ENUMX
3395   BFD_RELOC_SH_GOTPLT_LOW16
3396 ENUMX
3397   BFD_RELOC_SH_GOTPLT_MEDLOW16
3398 ENUMX
3399   BFD_RELOC_SH_GOTPLT_MEDHI16
3400 ENUMX
3401   BFD_RELOC_SH_GOTPLT_HI16
3402 ENUMX
3403   BFD_RELOC_SH_PLT_LOW16
3404 ENUMX
3405   BFD_RELOC_SH_PLT_MEDLOW16
3406 ENUMX
3407   BFD_RELOC_SH_PLT_MEDHI16
3408 ENUMX
3409   BFD_RELOC_SH_PLT_HI16
3410 ENUMX
3411   BFD_RELOC_SH_GOTOFF_LOW16
3412 ENUMX
3413   BFD_RELOC_SH_GOTOFF_MEDLOW16
3414 ENUMX
3415   BFD_RELOC_SH_GOTOFF_MEDHI16
3416 ENUMX
3417   BFD_RELOC_SH_GOTOFF_HI16
3418 ENUMX
3419   BFD_RELOC_SH_GOTPC_LOW16
3420 ENUMX
3421   BFD_RELOC_SH_GOTPC_MEDLOW16
3422 ENUMX
3423   BFD_RELOC_SH_GOTPC_MEDHI16
3424 ENUMX
3425   BFD_RELOC_SH_GOTPC_HI16
3426 ENUMX
3427   BFD_RELOC_SH_COPY64
3428 ENUMX
3429   BFD_RELOC_SH_GLOB_DAT64
3430 ENUMX
3431   BFD_RELOC_SH_JMP_SLOT64
3432 ENUMX
3433   BFD_RELOC_SH_RELATIVE64
3434 ENUMX
3435   BFD_RELOC_SH_GOT10BY4
3436 ENUMX
3437   BFD_RELOC_SH_GOT10BY8
3438 ENUMX
3439   BFD_RELOC_SH_GOTPLT10BY4
3440 ENUMX
3441   BFD_RELOC_SH_GOTPLT10BY8
3442 ENUMX
3443   BFD_RELOC_SH_GOTPLT32
3444 ENUMX
3445   BFD_RELOC_SH_SHMEDIA_CODE
3446 ENUMX
3447   BFD_RELOC_SH_IMMU5
3448 ENUMX
3449   BFD_RELOC_SH_IMMS6
3450 ENUMX
3451   BFD_RELOC_SH_IMMS6BY32
3452 ENUMX
3453   BFD_RELOC_SH_IMMU6
3454 ENUMX
3455   BFD_RELOC_SH_IMMS10
3456 ENUMX
3457   BFD_RELOC_SH_IMMS10BY2
3458 ENUMX
3459   BFD_RELOC_SH_IMMS10BY4
3460 ENUMX
3461   BFD_RELOC_SH_IMMS10BY8
3462 ENUMX
3463   BFD_RELOC_SH_IMMS16
3464 ENUMX
3465   BFD_RELOC_SH_IMMU16
3466 ENUMX
3467   BFD_RELOC_SH_IMM_LOW16
3468 ENUMX
3469   BFD_RELOC_SH_IMM_LOW16_PCREL
3470 ENUMX
3471   BFD_RELOC_SH_IMM_MEDLOW16
3472 ENUMX
3473   BFD_RELOC_SH_IMM_MEDLOW16_PCREL
3474 ENUMX
3475   BFD_RELOC_SH_IMM_MEDHI16
3476 ENUMX
3477   BFD_RELOC_SH_IMM_MEDHI16_PCREL
3478 ENUMX
3479   BFD_RELOC_SH_IMM_HI16
3480 ENUMX
3481   BFD_RELOC_SH_IMM_HI16_PCREL
3482 ENUMX
3483   BFD_RELOC_SH_PT_16
3484 ENUMX
3485   BFD_RELOC_SH_TLS_GD_32
3486 ENUMX
3487   BFD_RELOC_SH_TLS_LD_32
3488 ENUMX
3489   BFD_RELOC_SH_TLS_LDO_32
3490 ENUMX
3491   BFD_RELOC_SH_TLS_IE_32
3492 ENUMX
3493   BFD_RELOC_SH_TLS_LE_32
3494 ENUMX
3495   BFD_RELOC_SH_TLS_DTPMOD32
3496 ENUMX
3497   BFD_RELOC_SH_TLS_DTPOFF32
3498 ENUMX
3499   BFD_RELOC_SH_TLS_TPOFF32
3500 ENUMX
3501   BFD_RELOC_SH_GOT20
3502 ENUMX
3503   BFD_RELOC_SH_GOTOFF20
3504 ENUMX
3505   BFD_RELOC_SH_GOTFUNCDESC
3506 ENUMX
3507   BFD_RELOC_SH_GOTFUNCDESC20
3508 ENUMX
3509   BFD_RELOC_SH_GOTOFFFUNCDESC
3510 ENUMX
3511   BFD_RELOC_SH_GOTOFFFUNCDESC20
3512 ENUMX
3513   BFD_RELOC_SH_FUNCDESC
3514 ENUMDOC
3515   Renesas / SuperH SH relocs.  Not all of these appear in object files.
3516
3517 ENUM
3518   BFD_RELOC_ARC_B22_PCREL
3519 ENUMDOC
3520   ARC Cores relocs.
3521   ARC 22 bit pc-relative branch.  The lowest two bits must be zero and are
3522   not stored in the instruction.  The high 20 bits are installed in bits 26
3523   through 7 of the instruction.
3524 ENUM
3525   BFD_RELOC_ARC_B26
3526 ENUMDOC
3527   ARC 26 bit absolute branch.  The lowest two bits must be zero and are not
3528   stored in the instruction.  The high 24 bits are installed in bits 23
3529   through 0.
3530
3531 ENUM
3532   BFD_RELOC_BFIN_16_IMM
3533 ENUMDOC
3534   ADI Blackfin 16 bit immediate absolute reloc.
3535 ENUM
3536   BFD_RELOC_BFIN_16_HIGH
3537 ENUMDOC
3538   ADI Blackfin 16 bit immediate absolute reloc higher 16 bits.
3539 ENUM
3540   BFD_RELOC_BFIN_4_PCREL
3541 ENUMDOC
3542   ADI Blackfin 'a' part of LSETUP.
3543 ENUM
3544   BFD_RELOC_BFIN_5_PCREL
3545 ENUMDOC
3546   ADI Blackfin.
3547 ENUM
3548   BFD_RELOC_BFIN_16_LOW
3549 ENUMDOC
3550   ADI Blackfin 16 bit immediate absolute reloc lower 16 bits.
3551 ENUM
3552   BFD_RELOC_BFIN_10_PCREL
3553 ENUMDOC
3554   ADI Blackfin.
3555 ENUM
3556   BFD_RELOC_BFIN_11_PCREL
3557 ENUMDOC
3558   ADI Blackfin 'b' part of LSETUP.
3559 ENUM
3560   BFD_RELOC_BFIN_12_PCREL_JUMP
3561 ENUMDOC
3562   ADI Blackfin.
3563 ENUM
3564   BFD_RELOC_BFIN_12_PCREL_JUMP_S
3565 ENUMDOC
3566   ADI Blackfin Short jump, pcrel.
3567 ENUM
3568   BFD_RELOC_BFIN_24_PCREL_CALL_X
3569 ENUMDOC
3570   ADI Blackfin Call.x not implemented.
3571 ENUM
3572   BFD_RELOC_BFIN_24_PCREL_JUMP_L
3573 ENUMDOC
3574   ADI Blackfin Long Jump pcrel.
3575 ENUM
3576   BFD_RELOC_BFIN_GOT17M4
3577 ENUMX
3578   BFD_RELOC_BFIN_GOTHI
3579 ENUMX
3580   BFD_RELOC_BFIN_GOTLO
3581 ENUMX
3582   BFD_RELOC_BFIN_FUNCDESC
3583 ENUMX
3584   BFD_RELOC_BFIN_FUNCDESC_GOT17M4
3585 ENUMX
3586   BFD_RELOC_BFIN_FUNCDESC_GOTHI
3587 ENUMX
3588   BFD_RELOC_BFIN_FUNCDESC_GOTLO
3589 ENUMX
3590   BFD_RELOC_BFIN_FUNCDESC_VALUE
3591 ENUMX
3592   BFD_RELOC_BFIN_FUNCDESC_GOTOFF17M4
3593 ENUMX
3594   BFD_RELOC_BFIN_FUNCDESC_GOTOFFHI
3595 ENUMX
3596   BFD_RELOC_BFIN_FUNCDESC_GOTOFFLO
3597 ENUMX
3598   BFD_RELOC_BFIN_GOTOFF17M4
3599 ENUMX
3600   BFD_RELOC_BFIN_GOTOFFHI
3601 ENUMX
3602   BFD_RELOC_BFIN_GOTOFFLO
3603 ENUMDOC
3604   ADI Blackfin FD-PIC relocations.
3605 ENUM
3606   BFD_RELOC_BFIN_GOT
3607 ENUMDOC
3608   ADI Blackfin GOT relocation.
3609 ENUM
3610   BFD_RELOC_BFIN_PLTPC
3611 ENUMDOC
3612   ADI Blackfin PLTPC relocation.
3613 ENUM
3614   BFD_ARELOC_BFIN_PUSH
3615 ENUMDOC
3616   ADI Blackfin arithmetic relocation.
3617 ENUM
3618   BFD_ARELOC_BFIN_CONST
3619 ENUMDOC
3620   ADI Blackfin arithmetic relocation.
3621 ENUM
3622   BFD_ARELOC_BFIN_ADD
3623 ENUMDOC
3624   ADI Blackfin arithmetic relocation.
3625 ENUM
3626   BFD_ARELOC_BFIN_SUB
3627 ENUMDOC
3628   ADI Blackfin arithmetic relocation.
3629 ENUM
3630   BFD_ARELOC_BFIN_MULT
3631 ENUMDOC
3632   ADI Blackfin arithmetic relocation.
3633 ENUM
3634   BFD_ARELOC_BFIN_DIV
3635 ENUMDOC
3636   ADI Blackfin arithmetic relocation.
3637 ENUM
3638   BFD_ARELOC_BFIN_MOD
3639 ENUMDOC
3640   ADI Blackfin arithmetic relocation.
3641 ENUM
3642   BFD_ARELOC_BFIN_LSHIFT
3643 ENUMDOC
3644   ADI Blackfin arithmetic relocation.
3645 ENUM
3646   BFD_ARELOC_BFIN_RSHIFT
3647 ENUMDOC
3648   ADI Blackfin arithmetic relocation.
3649 ENUM
3650   BFD_ARELOC_BFIN_AND
3651 ENUMDOC
3652   ADI Blackfin arithmetic relocation.
3653 ENUM
3654   BFD_ARELOC_BFIN_OR
3655 ENUMDOC
3656   ADI Blackfin arithmetic relocation.
3657 ENUM
3658   BFD_ARELOC_BFIN_XOR
3659 ENUMDOC
3660   ADI Blackfin arithmetic relocation.
3661 ENUM
3662   BFD_ARELOC_BFIN_LAND
3663 ENUMDOC
3664   ADI Blackfin arithmetic relocation.
3665 ENUM
3666   BFD_ARELOC_BFIN_LOR
3667 ENUMDOC
3668   ADI Blackfin arithmetic relocation.
3669 ENUM
3670   BFD_ARELOC_BFIN_LEN
3671 ENUMDOC
3672   ADI Blackfin arithmetic relocation.
3673 ENUM
3674   BFD_ARELOC_BFIN_NEG
3675 ENUMDOC
3676   ADI Blackfin arithmetic relocation.
3677 ENUM
3678   BFD_ARELOC_BFIN_COMP
3679 ENUMDOC
3680   ADI Blackfin arithmetic relocation.
3681 ENUM
3682   BFD_ARELOC_BFIN_PAGE
3683 ENUMDOC
3684   ADI Blackfin arithmetic relocation.
3685 ENUM
3686   BFD_ARELOC_BFIN_HWPAGE
3687 ENUMDOC
3688   ADI Blackfin arithmetic relocation.
3689 ENUM
3690   BFD_ARELOC_BFIN_ADDR
3691 ENUMDOC
3692   ADI Blackfin arithmetic relocation.
3693
3694 ENUM
3695   BFD_RELOC_D10V_10_PCREL_R
3696 ENUMDOC
3697   Mitsubishi D10V relocs.
3698   This is a 10-bit reloc with the right 2 bits
3699   assumed to be 0.
3700 ENUM
3701   BFD_RELOC_D10V_10_PCREL_L
3702 ENUMDOC
3703   Mitsubishi D10V relocs.
3704   This is a 10-bit reloc with the right 2 bits
3705   assumed to be 0.  This is the same as the previous reloc
3706   except it is in the left container, i.e.,
3707   shifted left 15 bits.
3708 ENUM
3709   BFD_RELOC_D10V_18
3710 ENUMDOC
3711   This is an 18-bit reloc with the right 2 bits
3712   assumed to be 0.
3713 ENUM
3714   BFD_RELOC_D10V_18_PCREL
3715 ENUMDOC
3716   This is an 18-bit reloc with the right 2 bits
3717   assumed to be 0.
3718
3719 ENUM
3720   BFD_RELOC_D30V_6
3721 ENUMDOC
3722   Mitsubishi D30V relocs.
3723   This is a 6-bit absolute reloc.
3724 ENUM
3725   BFD_RELOC_D30V_9_PCREL
3726 ENUMDOC
3727   This is a 6-bit pc-relative reloc with
3728   the right 3 bits assumed to be 0.
3729 ENUM
3730   BFD_RELOC_D30V_9_PCREL_R
3731 ENUMDOC
3732   This is a 6-bit pc-relative reloc with
3733   the right 3 bits assumed to be 0. Same
3734   as the previous reloc but on the right side
3735   of the container.
3736 ENUM
3737   BFD_RELOC_D30V_15
3738 ENUMDOC
3739   This is a 12-bit absolute reloc with the
3740   right 3 bitsassumed to be 0.
3741 ENUM
3742   BFD_RELOC_D30V_15_PCREL
3743 ENUMDOC
3744   This is a 12-bit pc-relative reloc with
3745   the right 3 bits assumed to be 0.
3746 ENUM
3747   BFD_RELOC_D30V_15_PCREL_R
3748 ENUMDOC
3749   This is a 12-bit pc-relative reloc with
3750   the right 3 bits assumed to be 0. Same
3751   as the previous reloc but on the right side
3752   of the container.
3753 ENUM
3754   BFD_RELOC_D30V_21
3755 ENUMDOC
3756   This is an 18-bit absolute reloc with
3757   the right 3 bits assumed to be 0.
3758 ENUM
3759   BFD_RELOC_D30V_21_PCREL
3760 ENUMDOC
3761   This is an 18-bit pc-relative reloc with
3762   the right 3 bits assumed to be 0.
3763 ENUM
3764   BFD_RELOC_D30V_21_PCREL_R
3765 ENUMDOC
3766   This is an 18-bit pc-relative reloc with
3767   the right 3 bits assumed to be 0. Same
3768   as the previous reloc but on the right side
3769   of the container.
3770 ENUM
3771   BFD_RELOC_D30V_32
3772 ENUMDOC
3773   This is a 32-bit absolute reloc.
3774 ENUM
3775   BFD_RELOC_D30V_32_PCREL
3776 ENUMDOC
3777   This is a 32-bit pc-relative reloc.
3778
3779 ENUM
3780   BFD_RELOC_DLX_HI16_S
3781 ENUMDOC
3782   DLX relocs
3783 ENUM
3784   BFD_RELOC_DLX_LO16
3785 ENUMDOC
3786   DLX relocs
3787 ENUM
3788   BFD_RELOC_DLX_JMP26
3789 ENUMDOC
3790   DLX relocs
3791
3792 ENUM
3793   BFD_RELOC_M32C_HI8
3794 ENUMX
3795   BFD_RELOC_M32C_RL_JUMP
3796 ENUMX
3797   BFD_RELOC_M32C_RL_1ADDR
3798 ENUMX
3799   BFD_RELOC_M32C_RL_2ADDR
3800 ENUMDOC
3801   Renesas M16C/M32C Relocations.
3802
3803 ENUM
3804   BFD_RELOC_M32R_24
3805 ENUMDOC
3806   Renesas M32R (formerly Mitsubishi M32R) relocs.
3807   This is a 24 bit absolute address.
3808 ENUM
3809   BFD_RELOC_M32R_10_PCREL
3810 ENUMDOC
3811   This is a 10-bit pc-relative reloc with the right 2 bits assumed to be 0.
3812 ENUM
3813   BFD_RELOC_M32R_18_PCREL
3814 ENUMDOC
3815   This is an 18-bit reloc with the right 2 bits assumed to be 0.
3816 ENUM
3817   BFD_RELOC_M32R_26_PCREL
3818 ENUMDOC
3819   This is a 26-bit reloc with the right 2 bits assumed to be 0.
3820 ENUM
3821   BFD_RELOC_M32R_HI16_ULO
3822 ENUMDOC
3823   This is a 16-bit reloc containing the high 16 bits of an address
3824   used when the lower 16 bits are treated as unsigned.
3825 ENUM
3826   BFD_RELOC_M32R_HI16_SLO
3827 ENUMDOC
3828   This is a 16-bit reloc containing the high 16 bits of an address
3829   used when the lower 16 bits are treated as signed.
3830 ENUM
3831   BFD_RELOC_M32R_LO16
3832 ENUMDOC
3833   This is a 16-bit reloc containing the lower 16 bits of an address.
3834 ENUM
3835   BFD_RELOC_M32R_SDA16
3836 ENUMDOC
3837   This is a 16-bit reloc containing the small data area offset for use in
3838   add3, load, and store instructions.
3839 ENUM
3840   BFD_RELOC_M32R_GOT24
3841 ENUMX
3842   BFD_RELOC_M32R_26_PLTREL
3843 ENUMX
3844   BFD_RELOC_M32R_COPY
3845 ENUMX
3846   BFD_RELOC_M32R_GLOB_DAT
3847 ENUMX
3848   BFD_RELOC_M32R_JMP_SLOT
3849 ENUMX
3850   BFD_RELOC_M32R_RELATIVE
3851 ENUMX
3852   BFD_RELOC_M32R_GOTOFF
3853 ENUMX
3854   BFD_RELOC_M32R_GOTOFF_HI_ULO
3855 ENUMX
3856   BFD_RELOC_M32R_GOTOFF_HI_SLO
3857 ENUMX
3858   BFD_RELOC_M32R_GOTOFF_LO
3859 ENUMX
3860   BFD_RELOC_M32R_GOTPC24
3861 ENUMX
3862   BFD_RELOC_M32R_GOT16_HI_ULO
3863 ENUMX
3864   BFD_RELOC_M32R_GOT16_HI_SLO
3865 ENUMX
3866   BFD_RELOC_M32R_GOT16_LO
3867 ENUMX
3868   BFD_RELOC_M32R_GOTPC_HI_ULO
3869 ENUMX
3870   BFD_RELOC_M32R_GOTPC_HI_SLO
3871 ENUMX
3872   BFD_RELOC_M32R_GOTPC_LO
3873 ENUMDOC
3874   For PIC.
3875
3876
3877 ENUM
3878   BFD_RELOC_NDS32_20
3879 ENUMDOC
3880   NDS32 relocs.
3881   This is a 20 bit absolute address.
3882 ENUM
3883   BFD_RELOC_NDS32_9_PCREL
3884 ENUMDOC
3885   This is a 9-bit pc-relative reloc with the right 1 bit assumed to be 0.
3886 ENUM
3887   BFD_RELOC_NDS32_WORD_9_PCREL
3888 ENUMDOC
3889   This is a 9-bit pc-relative reloc with the right 1 bit assumed to be 0.
3890 ENUM
3891   BFD_RELOC_NDS32_15_PCREL
3892 ENUMDOC
3893   This is an 15-bit reloc with the right 1 bit assumed to be 0.
3894 ENUM
3895   BFD_RELOC_NDS32_17_PCREL
3896 ENUMDOC
3897   This is an 17-bit reloc with the right 1 bit assumed to be 0.
3898 ENUM
3899   BFD_RELOC_NDS32_25_PCREL
3900 ENUMDOC
3901   This is a 25-bit reloc with the right 1 bit assumed to be 0.
3902 ENUM
3903   BFD_RELOC_NDS32_HI20
3904 ENUMDOC
3905   This is a 20-bit reloc containing the high 20 bits of an address
3906   used with the lower 12 bits
3907 ENUM
3908   BFD_RELOC_NDS32_LO12S3
3909 ENUMDOC
3910   This is a 12-bit reloc containing the lower 12 bits of an address
3911   then shift right by 3. This is used with ldi,sdi...
3912 ENUM
3913   BFD_RELOC_NDS32_LO12S2
3914 ENUMDOC
3915   This is a 12-bit reloc containing the lower 12 bits of an address
3916   then shift left by 2. This is used with lwi,swi...
3917 ENUM
3918   BFD_RELOC_NDS32_LO12S1
3919 ENUMDOC
3920   This is a 12-bit reloc containing the lower 12 bits of an address
3921   then shift left by 1. This is used with lhi,shi...
3922 ENUM
3923   BFD_RELOC_NDS32_LO12S0
3924 ENUMDOC
3925   This is a 12-bit reloc containing the lower 12 bits of an address
3926   then shift left by 0. This is used with lbisbi...
3927 ENUM
3928   BFD_RELOC_NDS32_LO12S0_ORI
3929 ENUMDOC
3930   This is a 12-bit reloc containing the lower 12 bits of an address
3931   then shift left by 0. This is only used with branch relaxations
3932 ENUM
3933   BFD_RELOC_NDS32_SDA15S3
3934 ENUMDOC
3935   This is a 15-bit reloc containing the small data area 18-bit signed offset
3936   and shift left by 3 for use in ldi, sdi...
3937 ENUM
3938   BFD_RELOC_NDS32_SDA15S2
3939 ENUMDOC
3940   This is a 15-bit reloc containing the small data area 17-bit signed offset
3941   and shift left by 2 for use in lwi, swi...
3942 ENUM
3943   BFD_RELOC_NDS32_SDA15S1
3944 ENUMDOC
3945   This is a 15-bit reloc containing the small data area 16-bit signed offset
3946   and shift left by 1 for use in lhi, shi...
3947 ENUM
3948   BFD_RELOC_NDS32_SDA15S0
3949 ENUMDOC
3950   This is a 15-bit reloc containing the small data area 15-bit signed offset
3951   and shift left by 0 for use in lbi, sbi...
3952 ENUM
3953   BFD_RELOC_NDS32_SDA16S3
3954 ENUMDOC
3955   This is a 16-bit reloc containing the small data area 16-bit signed offset
3956   and shift left by 3
3957 ENUM
3958   BFD_RELOC_NDS32_SDA17S2
3959 ENUMDOC
3960   This is a 17-bit reloc containing the small data area 17-bit signed offset
3961   and shift left by 2 for use in lwi.gp, swi.gp...
3962 ENUM
3963   BFD_RELOC_NDS32_SDA18S1
3964 ENUMDOC
3965   This is a 18-bit reloc containing the small data area 18-bit signed offset
3966   and shift left by 1 for use in lhi.gp, shi.gp...
3967 ENUM
3968   BFD_RELOC_NDS32_SDA19S0
3969 ENUMDOC
3970   This is a 19-bit reloc containing the small data area 19-bit signed offset
3971   and shift left by 0 for use in lbi.gp, sbi.gp...
3972 ENUM
3973   BFD_RELOC_NDS32_GOT20
3974 ENUMX
3975   BFD_RELOC_NDS32_9_PLTREL
3976 ENUMX
3977   BFD_RELOC_NDS32_25_PLTREL
3978 ENUMX
3979   BFD_RELOC_NDS32_COPY
3980 ENUMX
3981   BFD_RELOC_NDS32_GLOB_DAT
3982 ENUMX
3983   BFD_RELOC_NDS32_JMP_SLOT
3984 ENUMX
3985   BFD_RELOC_NDS32_RELATIVE
3986 ENUMX
3987   BFD_RELOC_NDS32_GOTOFF
3988 ENUMX
3989   BFD_RELOC_NDS32_GOTOFF_HI20
3990 ENUMX
3991   BFD_RELOC_NDS32_GOTOFF_LO12
3992 ENUMX
3993   BFD_RELOC_NDS32_GOTPC20
3994 ENUMX
3995   BFD_RELOC_NDS32_GOT_HI20
3996 ENUMX
3997   BFD_RELOC_NDS32_GOT_LO12
3998 ENUMX
3999   BFD_RELOC_NDS32_GOTPC_HI20
4000 ENUMX
4001   BFD_RELOC_NDS32_GOTPC_LO12
4002 ENUMDOC
4003   for PIC
4004 ENUM
4005   BFD_RELOC_NDS32_INSN16
4006 ENUMX
4007   BFD_RELOC_NDS32_LABEL
4008 ENUMX
4009   BFD_RELOC_NDS32_LONGCALL1
4010 ENUMX
4011   BFD_RELOC_NDS32_LONGCALL2
4012 ENUMX
4013   BFD_RELOC_NDS32_LONGCALL3
4014 ENUMX
4015   BFD_RELOC_NDS32_LONGJUMP1
4016 ENUMX
4017   BFD_RELOC_NDS32_LONGJUMP2
4018 ENUMX
4019   BFD_RELOC_NDS32_LONGJUMP3
4020 ENUMX
4021   BFD_RELOC_NDS32_LOADSTORE
4022 ENUMX
4023   BFD_RELOC_NDS32_9_FIXED
4024 ENUMX
4025   BFD_RELOC_NDS32_15_FIXED
4026 ENUMX
4027   BFD_RELOC_NDS32_17_FIXED
4028 ENUMX
4029   BFD_RELOC_NDS32_25_FIXED
4030 ENUMX
4031   BFD_RELOC_NDS32_LONGCALL4
4032 ENUMX
4033   BFD_RELOC_NDS32_LONGCALL5
4034 ENUMX
4035   BFD_RELOC_NDS32_LONGCALL6
4036 ENUMX
4037   BFD_RELOC_NDS32_LONGJUMP4
4038 ENUMX
4039   BFD_RELOC_NDS32_LONGJUMP5
4040 ENUMX
4041   BFD_RELOC_NDS32_LONGJUMP6
4042 ENUMX
4043   BFD_RELOC_NDS32_LONGJUMP7
4044 ENUMDOC
4045   for relax
4046 ENUM
4047   BFD_RELOC_NDS32_PLTREL_HI20
4048 ENUMX
4049   BFD_RELOC_NDS32_PLTREL_LO12
4050 ENUMX
4051   BFD_RELOC_NDS32_PLT_GOTREL_HI20
4052 ENUMX
4053   BFD_RELOC_NDS32_PLT_GOTREL_LO12
4054 ENUMDOC
4055   for PIC
4056 ENUM
4057   BFD_RELOC_NDS32_SDA12S2_DP
4058 ENUMX
4059   BFD_RELOC_NDS32_SDA12S2_SP
4060 ENUMX
4061   BFD_RELOC_NDS32_LO12S2_DP
4062 ENUMX
4063   BFD_RELOC_NDS32_LO12S2_SP
4064 ENUMDOC
4065   for floating point
4066 ENUM
4067   BFD_RELOC_NDS32_DWARF2_OP1
4068 ENUMX
4069   BFD_RELOC_NDS32_DWARF2_OP2
4070 ENUMX
4071   BFD_RELOC_NDS32_DWARF2_LEB
4072 ENUMDOC
4073   for dwarf2 debug_line.
4074 ENUM
4075   BFD_RELOC_NDS32_UPDATE_TA
4076 ENUMDOC
4077   for eliminate 16-bit instructions
4078 ENUM
4079   BFD_RELOC_NDS32_PLT_GOTREL_LO20
4080 ENUMX
4081   BFD_RELOC_NDS32_PLT_GOTREL_LO15
4082 ENUMX
4083   BFD_RELOC_NDS32_PLT_GOTREL_LO19
4084 ENUMX
4085   BFD_RELOC_NDS32_GOT_LO15
4086 ENUMX
4087   BFD_RELOC_NDS32_GOT_LO19
4088 ENUMX
4089   BFD_RELOC_NDS32_GOTOFF_LO15
4090 ENUMX
4091   BFD_RELOC_NDS32_GOTOFF_LO19
4092 ENUMX
4093   BFD_RELOC_NDS32_GOT15S2
4094 ENUMX
4095   BFD_RELOC_NDS32_GOT17S2
4096 ENUMDOC
4097   for PIC object relaxation
4098 ENUM
4099   BFD_RELOC_NDS32_5
4100 ENUMDOC
4101   NDS32 relocs.
4102   This is a 5 bit absolute address.
4103 ENUM
4104   BFD_RELOC_NDS32_10_UPCREL
4105 ENUMDOC
4106   This is a 10-bit unsigned pc-relative reloc with the right 1 bit assumed to be 0.
4107 ENUM
4108   BFD_RELOC_NDS32_SDA_FP7U2_RELA
4109 ENUMDOC
4110   If fp were omitted, fp can used as another gp.
4111 ENUM
4112   BFD_RELOC_NDS32_RELAX_ENTRY
4113 ENUMX
4114   BFD_RELOC_NDS32_GOT_SUFF
4115 ENUMX
4116   BFD_RELOC_NDS32_GOTOFF_SUFF
4117 ENUMX
4118   BFD_RELOC_NDS32_PLT_GOT_SUFF
4119 ENUMX
4120   BFD_RELOC_NDS32_MULCALL_SUFF
4121 ENUMX
4122   BFD_RELOC_NDS32_PTR
4123 ENUMX
4124   BFD_RELOC_NDS32_PTR_COUNT
4125 ENUMX
4126   BFD_RELOC_NDS32_PTR_RESOLVED
4127 ENUMX
4128   BFD_RELOC_NDS32_PLTBLOCK
4129 ENUMX
4130   BFD_RELOC_NDS32_RELAX_REGION_BEGIN
4131 ENUMX
4132   BFD_RELOC_NDS32_RELAX_REGION_END
4133 ENUMX
4134   BFD_RELOC_NDS32_MINUEND
4135 ENUMX
4136   BFD_RELOC_NDS32_SUBTRAHEND
4137 ENUMX
4138   BFD_RELOC_NDS32_DIFF8
4139 ENUMX
4140   BFD_RELOC_NDS32_DIFF16
4141 ENUMX
4142   BFD_RELOC_NDS32_DIFF32
4143 ENUMX
4144   BFD_RELOC_NDS32_DIFF_ULEB128
4145 ENUMX
4146   BFD_RELOC_NDS32_EMPTY
4147 ENUMDOC
4148   relaxation relative relocation types
4149 ENUM
4150   BFD_RELOC_NDS32_25_ABS
4151 ENUMDOC
4152   This is a 25 bit absolute address.
4153 ENUM
4154   BFD_RELOC_NDS32_DATA
4155 ENUMX
4156   BFD_RELOC_NDS32_TRAN
4157 ENUMX
4158   BFD_RELOC_NDS32_17IFC_PCREL
4159 ENUMX
4160   BFD_RELOC_NDS32_10IFCU_PCREL
4161 ENUMDOC
4162   For ex9 and ifc using.
4163 ENUM
4164   BFD_RELOC_NDS32_TPOFF
4165 ENUMX
4166   BFD_RELOC_NDS32_TLS_LE_HI20
4167 ENUMX
4168   BFD_RELOC_NDS32_TLS_LE_LO12
4169 ENUMX
4170   BFD_RELOC_NDS32_TLS_LE_ADD
4171 ENUMX
4172   BFD_RELOC_NDS32_TLS_LE_LS
4173 ENUMX
4174   BFD_RELOC_NDS32_GOTTPOFF
4175 ENUMX
4176   BFD_RELOC_NDS32_TLS_IE_HI20
4177 ENUMX
4178   BFD_RELOC_NDS32_TLS_IE_LO12S2
4179 ENUMX
4180   BFD_RELOC_NDS32_TLS_TPOFF
4181 ENUMX
4182   BFD_RELOC_NDS32_TLS_LE_20
4183 ENUMX
4184   BFD_RELOC_NDS32_TLS_LE_15S0
4185 ENUMX
4186   BFD_RELOC_NDS32_TLS_LE_15S1
4187 ENUMX
4188   BFD_RELOC_NDS32_TLS_LE_15S2
4189 ENUMDOC
4190   For TLS.
4191
4192
4193 ENUM
4194   BFD_RELOC_V850_9_PCREL
4195 ENUMDOC
4196   This is a 9-bit reloc
4197 ENUM
4198   BFD_RELOC_V850_22_PCREL
4199 ENUMDOC
4200   This is a 22-bit reloc
4201
4202 ENUM
4203   BFD_RELOC_V850_SDA_16_16_OFFSET
4204 ENUMDOC
4205   This is a 16 bit offset from the short data area pointer.
4206 ENUM
4207   BFD_RELOC_V850_SDA_15_16_OFFSET
4208 ENUMDOC
4209   This is a 16 bit offset (of which only 15 bits are used) from the
4210   short data area pointer.
4211 ENUM
4212   BFD_RELOC_V850_ZDA_16_16_OFFSET
4213 ENUMDOC
4214   This is a 16 bit offset from the zero data area pointer.
4215 ENUM
4216   BFD_RELOC_V850_ZDA_15_16_OFFSET
4217 ENUMDOC
4218   This is a 16 bit offset (of which only 15 bits are used) from the
4219   zero data area pointer.
4220 ENUM
4221   BFD_RELOC_V850_TDA_6_8_OFFSET
4222 ENUMDOC
4223   This is an 8 bit offset (of which only 6 bits are used) from the
4224   tiny data area pointer.
4225 ENUM
4226   BFD_RELOC_V850_TDA_7_8_OFFSET
4227 ENUMDOC
4228   This is an 8bit offset (of which only 7 bits are used) from the tiny
4229   data area pointer.
4230 ENUM
4231   BFD_RELOC_V850_TDA_7_7_OFFSET
4232 ENUMDOC
4233   This is a 7 bit offset from the tiny data area pointer.
4234 ENUM
4235   BFD_RELOC_V850_TDA_16_16_OFFSET
4236 ENUMDOC
4237   This is a 16 bit offset from the tiny data area pointer.
4238 COMMENT
4239 ENUM
4240   BFD_RELOC_V850_TDA_4_5_OFFSET
4241 ENUMDOC
4242   This is a 5 bit offset (of which only 4 bits are used) from the tiny
4243   data area pointer.
4244 ENUM
4245   BFD_RELOC_V850_TDA_4_4_OFFSET
4246 ENUMDOC
4247   This is a 4 bit offset from the tiny data area pointer.
4248 ENUM
4249   BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET
4250 ENUMDOC
4251   This is a 16 bit offset from the short data area pointer, with the
4252   bits placed non-contiguously in the instruction.
4253 ENUM
4254   BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET
4255 ENUMDOC
4256   This is a 16 bit offset from the zero data area pointer, with the
4257   bits placed non-contiguously in the instruction.
4258 ENUM
4259   BFD_RELOC_V850_CALLT_6_7_OFFSET
4260 ENUMDOC
4261   This is a 6 bit offset from the call table base pointer.
4262 ENUM
4263   BFD_RELOC_V850_CALLT_16_16_OFFSET
4264 ENUMDOC
4265   This is a 16 bit offset from the call table base pointer.
4266 ENUM
4267   BFD_RELOC_V850_LONGCALL
4268 ENUMDOC
4269   Used for relaxing indirect function calls.
4270 ENUM
4271   BFD_RELOC_V850_LONGJUMP
4272 ENUMDOC
4273   Used for relaxing indirect jumps.
4274 ENUM
4275   BFD_RELOC_V850_ALIGN
4276 ENUMDOC
4277   Used to maintain alignment whilst relaxing.
4278 ENUM
4279   BFD_RELOC_V850_LO16_SPLIT_OFFSET
4280 ENUMDOC
4281   This is a variation of BFD_RELOC_LO16 that can be used in v850e ld.bu
4282   instructions.
4283 ENUM
4284   BFD_RELOC_V850_16_PCREL
4285 ENUMDOC
4286   This is a 16-bit reloc.
4287 ENUM
4288   BFD_RELOC_V850_17_PCREL
4289 ENUMDOC
4290   This is a 17-bit reloc.
4291 ENUM
4292   BFD_RELOC_V850_23
4293 ENUMDOC
4294   This is a 23-bit reloc.
4295 ENUM
4296   BFD_RELOC_V850_32_PCREL
4297 ENUMDOC
4298   This is a 32-bit reloc.
4299 ENUM
4300   BFD_RELOC_V850_32_ABS
4301 ENUMDOC
4302   This is a 32-bit reloc.
4303 ENUM
4304   BFD_RELOC_V850_16_SPLIT_OFFSET
4305 ENUMDOC
4306   This is a 16-bit reloc.
4307 ENUM
4308   BFD_RELOC_V850_16_S1
4309 ENUMDOC
4310   This is a 16-bit reloc.
4311 ENUM
4312   BFD_RELOC_V850_LO16_S1
4313 ENUMDOC
4314   Low 16 bits. 16 bit shifted by 1.
4315 ENUM
4316   BFD_RELOC_V850_CALLT_15_16_OFFSET
4317 ENUMDOC
4318   This is a 16 bit offset from the call table base pointer.
4319 ENUM
4320   BFD_RELOC_V850_32_GOTPCREL
4321 ENUMDOC
4322   DSO relocations.
4323 ENUM
4324   BFD_RELOC_V850_16_GOT
4325 ENUMDOC
4326   DSO relocations.
4327 ENUM
4328   BFD_RELOC_V850_32_GOT
4329 ENUMDOC
4330   DSO relocations.
4331 ENUM
4332   BFD_RELOC_V850_22_PLT_PCREL
4333 ENUMDOC
4334   DSO relocations.
4335 ENUM
4336   BFD_RELOC_V850_32_PLT_PCREL
4337 ENUMDOC
4338   DSO relocations.
4339 ENUM
4340   BFD_RELOC_V850_COPY
4341 ENUMDOC
4342   DSO relocations.
4343 ENUM
4344   BFD_RELOC_V850_GLOB_DAT
4345 ENUMDOC
4346   DSO relocations.
4347 ENUM
4348   BFD_RELOC_V850_JMP_SLOT
4349 ENUMDOC
4350   DSO relocations.
4351 ENUM
4352   BFD_RELOC_V850_RELATIVE
4353 ENUMDOC
4354   DSO relocations.
4355 ENUM
4356   BFD_RELOC_V850_16_GOTOFF
4357 ENUMDOC
4358   DSO relocations.
4359 ENUM
4360   BFD_RELOC_V850_32_GOTOFF
4361 ENUMDOC
4362   DSO relocations.
4363 ENUM
4364   BFD_RELOC_V850_CODE
4365 ENUMDOC
4366   start code.
4367 ENUM
4368   BFD_RELOC_V850_DATA
4369 ENUMDOC
4370   start data in text.
4371
4372 ENUM
4373   BFD_RELOC_TIC30_LDP
4374 ENUMDOC
4375   This is a 8bit DP reloc for the tms320c30, where the most
4376   significant 8 bits of a 24 bit word are placed into the least
4377   significant 8 bits of the opcode.
4378
4379 ENUM
4380   BFD_RELOC_TIC54X_PARTLS7
4381 ENUMDOC
4382   This is a 7bit reloc for the tms320c54x, where the least
4383   significant 7 bits of a 16 bit word are placed into the least
4384   significant 7 bits of the opcode.
4385
4386 ENUM
4387   BFD_RELOC_TIC54X_PARTMS9
4388 ENUMDOC
4389   This is a 9bit DP reloc for the tms320c54x, where the most
4390   significant 9 bits of a 16 bit word are placed into the least
4391   significant 9 bits of the opcode.
4392
4393 ENUM
4394   BFD_RELOC_TIC54X_23
4395 ENUMDOC
4396   This is an extended address 23-bit reloc for the tms320c54x.
4397
4398 ENUM
4399   BFD_RELOC_TIC54X_16_OF_23
4400 ENUMDOC
4401   This is a 16-bit reloc for the tms320c54x, where the least
4402   significant 16 bits of a 23-bit extended address are placed into
4403   the opcode.
4404
4405 ENUM
4406   BFD_RELOC_TIC54X_MS7_OF_23
4407 ENUMDOC
4408   This is a reloc for the tms320c54x, where the most
4409   significant 7 bits of a 23-bit extended address are placed into
4410   the opcode.
4411
4412 ENUM
4413   BFD_RELOC_C6000_PCR_S21
4414 ENUMX
4415   BFD_RELOC_C6000_PCR_S12
4416 ENUMX
4417   BFD_RELOC_C6000_PCR_S10
4418 ENUMX
4419   BFD_RELOC_C6000_PCR_S7
4420 ENUMX
4421   BFD_RELOC_C6000_ABS_S16
4422 ENUMX
4423   BFD_RELOC_C6000_ABS_L16
4424 ENUMX
4425   BFD_RELOC_C6000_ABS_H16
4426 ENUMX
4427   BFD_RELOC_C6000_SBR_U15_B
4428 ENUMX
4429   BFD_RELOC_C6000_SBR_U15_H
4430 ENUMX
4431   BFD_RELOC_C6000_SBR_U15_W
4432 ENUMX
4433   BFD_RELOC_C6000_SBR_S16
4434 ENUMX
4435   BFD_RELOC_C6000_SBR_L16_B
4436 ENUMX
4437   BFD_RELOC_C6000_SBR_L16_H
4438 ENUMX
4439   BFD_RELOC_C6000_SBR_L16_W
4440 ENUMX
4441   BFD_RELOC_C6000_SBR_H16_B
4442 ENUMX
4443   BFD_RELOC_C6000_SBR_H16_H
4444 ENUMX
4445   BFD_RELOC_C6000_SBR_H16_W
4446 ENUMX
4447   BFD_RELOC_C6000_SBR_GOT_U15_W
4448 ENUMX
4449   BFD_RELOC_C6000_SBR_GOT_L16_W
4450 ENUMX
4451   BFD_RELOC_C6000_SBR_GOT_H16_W
4452 ENUMX
4453   BFD_RELOC_C6000_DSBT_INDEX
4454 ENUMX
4455   BFD_RELOC_C6000_PREL31
4456 ENUMX
4457   BFD_RELOC_C6000_COPY
4458 ENUMX
4459   BFD_RELOC_C6000_JUMP_SLOT
4460 ENUMX
4461   BFD_RELOC_C6000_EHTYPE
4462 ENUMX
4463   BFD_RELOC_C6000_PCR_H16
4464 ENUMX
4465   BFD_RELOC_C6000_PCR_L16
4466 ENUMX
4467   BFD_RELOC_C6000_ALIGN
4468 ENUMX
4469   BFD_RELOC_C6000_FPHEAD
4470 ENUMX
4471   BFD_RELOC_C6000_NOCMP
4472 ENUMDOC
4473   TMS320C6000 relocations.
4474
4475 ENUM
4476   BFD_RELOC_FR30_48
4477 ENUMDOC
4478   This is a 48 bit reloc for the FR30 that stores 32 bits.
4479 ENUM
4480   BFD_RELOC_FR30_20
4481 ENUMDOC
4482   This is a 32 bit reloc for the FR30 that stores 20 bits split up into
4483   two sections.
4484 ENUM
4485   BFD_RELOC_FR30_6_IN_4
4486 ENUMDOC
4487   This is a 16 bit reloc for the FR30 that stores a 6 bit word offset in
4488   4 bits.
4489 ENUM
4490   BFD_RELOC_FR30_8_IN_8
4491 ENUMDOC
4492   This is a 16 bit reloc for the FR30 that stores an 8 bit byte offset
4493   into 8 bits.
4494 ENUM
4495   BFD_RELOC_FR30_9_IN_8
4496 ENUMDOC
4497   This is a 16 bit reloc for the FR30 that stores a 9 bit short offset
4498   into 8 bits.
4499 ENUM
4500   BFD_RELOC_FR30_10_IN_8
4501 ENUMDOC
4502   This is a 16 bit reloc for the FR30 that stores a 10 bit word offset
4503   into 8 bits.
4504 ENUM
4505   BFD_RELOC_FR30_9_PCREL
4506 ENUMDOC
4507   This is a 16 bit reloc for the FR30 that stores a 9 bit pc relative
4508   short offset into 8 bits.
4509 ENUM
4510   BFD_RELOC_FR30_12_PCREL
4511 ENUMDOC
4512   This is a 16 bit reloc for the FR30 that stores a 12 bit pc relative
4513   short offset into 11 bits.
4514
4515 ENUM
4516   BFD_RELOC_MCORE_PCREL_IMM8BY4
4517 ENUMX
4518   BFD_RELOC_MCORE_PCREL_IMM11BY2
4519 ENUMX
4520   BFD_RELOC_MCORE_PCREL_IMM4BY2
4521 ENUMX
4522   BFD_RELOC_MCORE_PCREL_32
4523 ENUMX
4524   BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2
4525 ENUMX
4526   BFD_RELOC_MCORE_RVA
4527 ENUMDOC
4528   Motorola Mcore relocations.
4529
4530 ENUM
4531   BFD_RELOC_MEP_8
4532 ENUMX
4533   BFD_RELOC_MEP_16
4534 ENUMX
4535   BFD_RELOC_MEP_32
4536 ENUMX
4537   BFD_RELOC_MEP_PCREL8A2
4538 ENUMX
4539   BFD_RELOC_MEP_PCREL12A2
4540 ENUMX
4541   BFD_RELOC_MEP_PCREL17A2
4542 ENUMX
4543   BFD_RELOC_MEP_PCREL24A2
4544 ENUMX
4545   BFD_RELOC_MEP_PCABS24A2
4546 ENUMX
4547   BFD_RELOC_MEP_LOW16
4548 ENUMX
4549   BFD_RELOC_MEP_HI16U
4550 ENUMX
4551   BFD_RELOC_MEP_HI16S
4552 ENUMX
4553   BFD_RELOC_MEP_GPREL
4554 ENUMX
4555   BFD_RELOC_MEP_TPREL
4556 ENUMX
4557   BFD_RELOC_MEP_TPREL7
4558 ENUMX
4559   BFD_RELOC_MEP_TPREL7A2
4560 ENUMX
4561   BFD_RELOC_MEP_TPREL7A4
4562 ENUMX
4563   BFD_RELOC_MEP_UIMM24
4564 ENUMX
4565   BFD_RELOC_MEP_ADDR24A4
4566 ENUMX
4567   BFD_RELOC_MEP_GNU_VTINHERIT
4568 ENUMX
4569   BFD_RELOC_MEP_GNU_VTENTRY
4570 ENUMDOC
4571   Toshiba Media Processor Relocations.
4572 COMMENT
4573
4574 ENUM
4575   BFD_RELOC_METAG_HIADDR16
4576 ENUMX
4577   BFD_RELOC_METAG_LOADDR16
4578 ENUMX
4579   BFD_RELOC_METAG_RELBRANCH
4580 ENUMX
4581   BFD_RELOC_METAG_GETSETOFF
4582 ENUMX
4583   BFD_RELOC_METAG_HIOG
4584 ENUMX
4585   BFD_RELOC_METAG_LOOG
4586 ENUMX
4587   BFD_RELOC_METAG_REL8
4588 ENUMX
4589   BFD_RELOC_METAG_REL16
4590 ENUMX
4591   BFD_RELOC_METAG_HI16_GOTOFF
4592 ENUMX
4593   BFD_RELOC_METAG_LO16_GOTOFF
4594 ENUMX
4595   BFD_RELOC_METAG_GETSET_GOTOFF
4596 ENUMX
4597   BFD_RELOC_METAG_GETSET_GOT
4598 ENUMX
4599   BFD_RELOC_METAG_HI16_GOTPC
4600 ENUMX
4601   BFD_RELOC_METAG_LO16_GOTPC
4602 ENUMX
4603   BFD_RELOC_METAG_HI16_PLT
4604 ENUMX
4605   BFD_RELOC_METAG_LO16_PLT
4606 ENUMX
4607   BFD_RELOC_METAG_RELBRANCH_PLT
4608 ENUMX
4609   BFD_RELOC_METAG_GOTOFF
4610 ENUMX
4611   BFD_RELOC_METAG_PLT
4612 ENUMX
4613   BFD_RELOC_METAG_COPY
4614 ENUMX
4615   BFD_RELOC_METAG_JMP_SLOT
4616 ENUMX
4617   BFD_RELOC_METAG_RELATIVE
4618 ENUMX
4619   BFD_RELOC_METAG_GLOB_DAT
4620 ENUMX
4621   BFD_RELOC_METAG_TLS_GD
4622 ENUMX
4623   BFD_RELOC_METAG_TLS_LDM
4624 ENUMX
4625   BFD_RELOC_METAG_TLS_LDO_HI16
4626 ENUMX
4627   BFD_RELOC_METAG_TLS_LDO_LO16
4628 ENUMX
4629   BFD_RELOC_METAG_TLS_LDO
4630 ENUMX
4631   BFD_RELOC_METAG_TLS_IE
4632 ENUMX
4633   BFD_RELOC_METAG_TLS_IENONPIC
4634 ENUMX
4635   BFD_RELOC_METAG_TLS_IENONPIC_HI16
4636 ENUMX
4637   BFD_RELOC_METAG_TLS_IENONPIC_LO16
4638 ENUMX
4639   BFD_RELOC_METAG_TLS_TPOFF
4640 ENUMX
4641   BFD_RELOC_METAG_TLS_DTPMOD
4642 ENUMX
4643   BFD_RELOC_METAG_TLS_DTPOFF
4644 ENUMX
4645   BFD_RELOC_METAG_TLS_LE
4646 ENUMX
4647   BFD_RELOC_METAG_TLS_LE_HI16
4648 ENUMX
4649   BFD_RELOC_METAG_TLS_LE_LO16
4650 ENUMDOC
4651   Imagination Technologies Meta relocations.
4652
4653 ENUM
4654   BFD_RELOC_MMIX_GETA
4655 ENUMX
4656   BFD_RELOC_MMIX_GETA_1
4657 ENUMX
4658   BFD_RELOC_MMIX_GETA_2
4659 ENUMX
4660   BFD_RELOC_MMIX_GETA_3
4661 ENUMDOC
4662   These are relocations for the GETA instruction.
4663 ENUM
4664   BFD_RELOC_MMIX_CBRANCH
4665 ENUMX
4666   BFD_RELOC_MMIX_CBRANCH_J
4667 ENUMX
4668   BFD_RELOC_MMIX_CBRANCH_1
4669 ENUMX
4670   BFD_RELOC_MMIX_CBRANCH_2
4671 ENUMX
4672   BFD_RELOC_MMIX_CBRANCH_3
4673 ENUMDOC
4674   These are relocations for a conditional branch instruction.
4675 ENUM
4676   BFD_RELOC_MMIX_PUSHJ
4677 ENUMX
4678   BFD_RELOC_MMIX_PUSHJ_1
4679 ENUMX
4680   BFD_RELOC_MMIX_PUSHJ_2
4681 ENUMX
4682   BFD_RELOC_MMIX_PUSHJ_3
4683 ENUMX
4684   BFD_RELOC_MMIX_PUSHJ_STUBBABLE
4685 ENUMDOC
4686   These are relocations for the PUSHJ instruction.
4687 ENUM
4688   BFD_RELOC_MMIX_JMP
4689 ENUMX
4690   BFD_RELOC_MMIX_JMP_1
4691 ENUMX
4692   BFD_RELOC_MMIX_JMP_2
4693 ENUMX
4694   BFD_RELOC_MMIX_JMP_3
4695 ENUMDOC
4696   These are relocations for the JMP instruction.
4697 ENUM
4698   BFD_RELOC_MMIX_ADDR19
4699 ENUMDOC
4700   This is a relocation for a relative address as in a GETA instruction or
4701   a branch.
4702 ENUM
4703   BFD_RELOC_MMIX_ADDR27
4704 ENUMDOC
4705   This is a relocation for a relative address as in a JMP instruction.
4706 ENUM
4707   BFD_RELOC_MMIX_REG_OR_BYTE
4708 ENUMDOC
4709   This is a relocation for an instruction field that may be a general
4710   register or a value 0..255.
4711 ENUM
4712   BFD_RELOC_MMIX_REG
4713 ENUMDOC
4714   This is a relocation for an instruction field that may be a general
4715   register.
4716 ENUM
4717   BFD_RELOC_MMIX_BASE_PLUS_OFFSET
4718 ENUMDOC
4719   This is a relocation for two instruction fields holding a register and
4720   an offset, the equivalent of the relocation.
4721 ENUM
4722   BFD_RELOC_MMIX_LOCAL
4723 ENUMDOC
4724   This relocation is an assertion that the expression is not allocated as
4725   a global register.  It does not modify contents.
4726
4727 ENUM
4728   BFD_RELOC_AVR_7_PCREL
4729 ENUMDOC
4730   This is a 16 bit reloc for the AVR that stores 8 bit pc relative
4731   short offset into 7 bits.
4732 ENUM
4733   BFD_RELOC_AVR_13_PCREL
4734 ENUMDOC
4735   This is a 16 bit reloc for the AVR that stores 13 bit pc relative
4736   short offset into 12 bits.
4737 ENUM
4738   BFD_RELOC_AVR_16_PM
4739 ENUMDOC
4740   This is a 16 bit reloc for the AVR that stores 17 bit value (usually
4741   program memory address) into 16 bits.
4742 ENUM
4743   BFD_RELOC_AVR_LO8_LDI
4744 ENUMDOC
4745   This is a 16 bit reloc for the AVR that stores 8 bit value (usually
4746   data memory address) into 8 bit immediate value of LDI insn.
4747 ENUM
4748   BFD_RELOC_AVR_HI8_LDI
4749 ENUMDOC
4750   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4751   of data memory address) into 8 bit immediate value of LDI insn.
4752 ENUM
4753   BFD_RELOC_AVR_HH8_LDI
4754 ENUMDOC
4755   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4756   of program memory address) into 8 bit immediate value of LDI insn.
4757 ENUM
4758   BFD_RELOC_AVR_MS8_LDI
4759 ENUMDOC
4760   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4761   of 32 bit value) into 8 bit immediate value of LDI insn.
4762 ENUM
4763   BFD_RELOC_AVR_LO8_LDI_NEG
4764 ENUMDOC
4765   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4766   (usually data memory address) into 8 bit immediate value of SUBI insn.
4767 ENUM
4768   BFD_RELOC_AVR_HI8_LDI_NEG
4769 ENUMDOC
4770   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4771   (high 8 bit of data memory address) into 8 bit immediate value of
4772   SUBI insn.
4773 ENUM
4774   BFD_RELOC_AVR_HH8_LDI_NEG
4775 ENUMDOC
4776   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4777   (most high 8 bit of program memory address) into 8 bit immediate value
4778   of LDI or SUBI insn.
4779 ENUM
4780   BFD_RELOC_AVR_MS8_LDI_NEG
4781 ENUMDOC
4782   This is a 16 bit reloc for the AVR that stores negated 8 bit value (msb
4783   of 32 bit value) into 8 bit immediate value of LDI insn.
4784 ENUM
4785   BFD_RELOC_AVR_LO8_LDI_PM
4786 ENUMDOC
4787   This is a 16 bit reloc for the AVR that stores 8 bit value (usually
4788   command address) into 8 bit immediate value of LDI insn.
4789 ENUM
4790   BFD_RELOC_AVR_LO8_LDI_GS
4791 ENUMDOC
4792   This is a 16 bit reloc for the AVR that stores 8 bit value
4793   (command address) into 8 bit immediate value of LDI insn. If the address
4794   is beyond the 128k boundary, the linker inserts a jump stub for this reloc
4795   in the lower 128k.
4796 ENUM
4797   BFD_RELOC_AVR_HI8_LDI_PM
4798 ENUMDOC
4799   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4800   of command address) into 8 bit immediate value of LDI insn.
4801 ENUM
4802   BFD_RELOC_AVR_HI8_LDI_GS
4803 ENUMDOC
4804   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4805   of command address) into 8 bit immediate value of LDI insn.  If the address
4806   is beyond the 128k boundary, the linker inserts a jump stub for this reloc
4807   below 128k.
4808 ENUM
4809   BFD_RELOC_AVR_HH8_LDI_PM
4810 ENUMDOC
4811   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4812   of command address) into 8 bit immediate value of LDI insn.
4813 ENUM
4814   BFD_RELOC_AVR_LO8_LDI_PM_NEG
4815 ENUMDOC
4816   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4817   (usually command address) into 8 bit immediate value of SUBI insn.
4818 ENUM
4819   BFD_RELOC_AVR_HI8_LDI_PM_NEG
4820 ENUMDOC
4821   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4822   (high 8 bit of 16 bit command address) into 8 bit immediate value
4823   of SUBI insn.
4824 ENUM
4825   BFD_RELOC_AVR_HH8_LDI_PM_NEG
4826 ENUMDOC
4827   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4828   (high 6 bit of 22 bit command address) into 8 bit immediate
4829   value of SUBI insn.
4830 ENUM
4831   BFD_RELOC_AVR_CALL
4832 ENUMDOC
4833   This is a 32 bit reloc for the AVR that stores 23 bit value
4834   into 22 bits.
4835 ENUM
4836   BFD_RELOC_AVR_LDI
4837 ENUMDOC
4838   This is a 16 bit reloc for the AVR that stores all needed bits
4839   for absolute addressing with ldi with overflow check to linktime
4840 ENUM
4841   BFD_RELOC_AVR_6
4842 ENUMDOC
4843   This is a 6 bit reloc for the AVR that stores offset for ldd/std
4844   instructions
4845 ENUM
4846   BFD_RELOC_AVR_6_ADIW
4847 ENUMDOC
4848   This is a 6 bit reloc for the AVR that stores offset for adiw/sbiw
4849   instructions
4850 ENUM
4851   BFD_RELOC_AVR_8_LO
4852 ENUMDOC
4853   This is a 8 bit reloc for the AVR that stores bits 0..7 of a symbol
4854   in .byte lo8(symbol)
4855 ENUM
4856   BFD_RELOC_AVR_8_HI
4857 ENUMDOC
4858   This is a 8 bit reloc for the AVR that stores bits 8..15 of a symbol
4859   in .byte hi8(symbol)
4860 ENUM
4861   BFD_RELOC_AVR_8_HLO
4862 ENUMDOC
4863   This is a 8 bit reloc for the AVR that stores bits 16..23 of a symbol
4864   in .byte hlo8(symbol)
4865 ENUM
4866   BFD_RELOC_AVR_DIFF8
4867 ENUMX
4868   BFD_RELOC_AVR_DIFF16
4869 ENUMX
4870   BFD_RELOC_AVR_DIFF32
4871 ENUMDOC
4872   AVR relocations to mark the difference of two local symbols.
4873   These are only needed to support linker relaxation and can be ignored
4874   when not relaxing.  The field is set to the value of the difference
4875   assuming no relaxation.  The relocation encodes the position of the
4876   second symbol so the linker can determine whether to adjust the field
4877   value.
4878 ENUM
4879   BFD_RELOC_AVR_LDS_STS_16
4880 ENUMDOC
4881   This is a 7 bit reloc for the AVR that stores SRAM address for 16bit
4882   lds and sts instructions supported only tiny core.
4883 ENUM
4884   BFD_RELOC_AVR_PORT6
4885 ENUMDOC
4886   This is a 6 bit reloc for the AVR that stores an I/O register
4887   number for the IN and OUT instructions
4888 ENUM
4889   BFD_RELOC_AVR_PORT5
4890 ENUMDOC
4891   This is a 5 bit reloc for the AVR that stores an I/O register
4892   number for the SBIC, SBIS, SBI and CBI instructions
4893 ENUM
4894   BFD_RELOC_RL78_NEG8
4895 ENUMX
4896   BFD_RELOC_RL78_NEG16
4897 ENUMX
4898   BFD_RELOC_RL78_NEG24
4899 ENUMX
4900   BFD_RELOC_RL78_NEG32
4901 ENUMX
4902   BFD_RELOC_RL78_16_OP
4903 ENUMX
4904   BFD_RELOC_RL78_24_OP
4905 ENUMX
4906   BFD_RELOC_RL78_32_OP
4907 ENUMX
4908   BFD_RELOC_RL78_8U
4909 ENUMX
4910   BFD_RELOC_RL78_16U
4911 ENUMX
4912   BFD_RELOC_RL78_24U
4913 ENUMX
4914   BFD_RELOC_RL78_DIR3U_PCREL
4915 ENUMX
4916   BFD_RELOC_RL78_DIFF
4917 ENUMX
4918   BFD_RELOC_RL78_GPRELB
4919 ENUMX
4920   BFD_RELOC_RL78_GPRELW
4921 ENUMX
4922   BFD_RELOC_RL78_GPRELL
4923 ENUMX
4924   BFD_RELOC_RL78_SYM
4925 ENUMX
4926   BFD_RELOC_RL78_OP_SUBTRACT
4927 ENUMX
4928   BFD_RELOC_RL78_OP_NEG
4929 ENUMX
4930   BFD_RELOC_RL78_OP_AND
4931 ENUMX
4932   BFD_RELOC_RL78_OP_SHRA
4933 ENUMX
4934   BFD_RELOC_RL78_ABS8
4935 ENUMX
4936   BFD_RELOC_RL78_ABS16
4937 ENUMX
4938   BFD_RELOC_RL78_ABS16_REV
4939 ENUMX
4940   BFD_RELOC_RL78_ABS32
4941 ENUMX
4942   BFD_RELOC_RL78_ABS32_REV
4943 ENUMX
4944   BFD_RELOC_RL78_ABS16U
4945 ENUMX
4946   BFD_RELOC_RL78_ABS16UW
4947 ENUMX
4948   BFD_RELOC_RL78_ABS16UL
4949 ENUMX
4950   BFD_RELOC_RL78_RELAX
4951 ENUMX
4952   BFD_RELOC_RL78_HI16
4953 ENUMX
4954   BFD_RELOC_RL78_HI8
4955 ENUMX
4956   BFD_RELOC_RL78_LO16
4957 ENUMX
4958   BFD_RELOC_RL78_CODE
4959 ENUMDOC
4960   Renesas RL78 Relocations.
4961
4962 ENUM
4963   BFD_RELOC_RX_NEG8
4964 ENUMX
4965   BFD_RELOC_RX_NEG16
4966 ENUMX
4967   BFD_RELOC_RX_NEG24
4968 ENUMX
4969   BFD_RELOC_RX_NEG32
4970 ENUMX
4971   BFD_RELOC_RX_16_OP
4972 ENUMX
4973   BFD_RELOC_RX_24_OP
4974 ENUMX
4975   BFD_RELOC_RX_32_OP
4976 ENUMX
4977   BFD_RELOC_RX_8U
4978 ENUMX
4979   BFD_RELOC_RX_16U
4980 ENUMX
4981   BFD_RELOC_RX_24U
4982 ENUMX
4983   BFD_RELOC_RX_DIR3U_PCREL
4984 ENUMX
4985   BFD_RELOC_RX_DIFF
4986 ENUMX
4987   BFD_RELOC_RX_GPRELB
4988 ENUMX
4989   BFD_RELOC_RX_GPRELW
4990 ENUMX
4991   BFD_RELOC_RX_GPRELL
4992 ENUMX
4993   BFD_RELOC_RX_SYM
4994 ENUMX
4995   BFD_RELOC_RX_OP_SUBTRACT
4996 ENUMX
4997   BFD_RELOC_RX_OP_NEG
4998 ENUMX
4999   BFD_RELOC_RX_ABS8
5000 ENUMX
5001   BFD_RELOC_RX_ABS16
5002 ENUMX
5003   BFD_RELOC_RX_ABS16_REV
5004 ENUMX
5005   BFD_RELOC_RX_ABS32
5006 ENUMX
5007   BFD_RELOC_RX_ABS32_REV
5008 ENUMX
5009   BFD_RELOC_RX_ABS16U
5010 ENUMX
5011   BFD_RELOC_RX_ABS16UW
5012 ENUMX
5013   BFD_RELOC_RX_ABS16UL
5014 ENUMX
5015   BFD_RELOC_RX_RELAX
5016 ENUMDOC
5017   Renesas RX Relocations.
5018
5019 ENUM
5020   BFD_RELOC_390_12
5021 ENUMDOC
5022    Direct 12 bit.
5023 ENUM
5024   BFD_RELOC_390_GOT12
5025 ENUMDOC
5026   12 bit GOT offset.
5027 ENUM
5028   BFD_RELOC_390_PLT32
5029 ENUMDOC
5030   32 bit PC relative PLT address.
5031 ENUM
5032   BFD_RELOC_390_COPY
5033 ENUMDOC
5034   Copy symbol at runtime.
5035 ENUM
5036   BFD_RELOC_390_GLOB_DAT
5037 ENUMDOC
5038   Create GOT entry.
5039 ENUM
5040   BFD_RELOC_390_JMP_SLOT
5041 ENUMDOC
5042   Create PLT entry.
5043 ENUM
5044   BFD_RELOC_390_RELATIVE
5045 ENUMDOC
5046   Adjust by program base.
5047 ENUM
5048   BFD_RELOC_390_GOTPC
5049 ENUMDOC
5050   32 bit PC relative offset to GOT.
5051 ENUM
5052   BFD_RELOC_390_GOT16
5053 ENUMDOC
5054   16 bit GOT offset.
5055 ENUM
5056   BFD_RELOC_390_PC12DBL
5057 ENUMDOC
5058   PC relative 12 bit shifted by 1.
5059 ENUM
5060   BFD_RELOC_390_PLT12DBL
5061 ENUMDOC
5062   12 bit PC rel. PLT shifted by 1.
5063 ENUM
5064   BFD_RELOC_390_PC16DBL
5065 ENUMDOC
5066   PC relative 16 bit shifted by 1.
5067 ENUM
5068   BFD_RELOC_390_PLT16DBL
5069 ENUMDOC
5070   16 bit PC rel. PLT shifted by 1.
5071 ENUM
5072   BFD_RELOC_390_PC24DBL
5073 ENUMDOC
5074   PC relative 24 bit shifted by 1.
5075 ENUM
5076   BFD_RELOC_390_PLT24DBL
5077 ENUMDOC
5078   24 bit PC rel. PLT shifted by 1.
5079 ENUM
5080   BFD_RELOC_390_PC32DBL
5081 ENUMDOC
5082   PC relative 32 bit shifted by 1.
5083 ENUM
5084   BFD_RELOC_390_PLT32DBL
5085 ENUMDOC
5086   32 bit PC rel. PLT shifted by 1.
5087 ENUM
5088   BFD_RELOC_390_GOTPCDBL
5089 ENUMDOC
5090   32 bit PC rel. GOT shifted by 1.
5091 ENUM
5092   BFD_RELOC_390_GOT64
5093 ENUMDOC
5094   64 bit GOT offset.
5095 ENUM
5096   BFD_RELOC_390_PLT64
5097 ENUMDOC
5098   64 bit PC relative PLT address.
5099 ENUM
5100   BFD_RELOC_390_GOTENT
5101 ENUMDOC
5102   32 bit rel. offset to GOT entry.
5103 ENUM
5104   BFD_RELOC_390_GOTOFF64
5105 ENUMDOC
5106   64 bit offset to GOT.
5107 ENUM
5108   BFD_RELOC_390_GOTPLT12
5109 ENUMDOC
5110   12-bit offset to symbol-entry within GOT, with PLT handling.
5111 ENUM
5112   BFD_RELOC_390_GOTPLT16
5113 ENUMDOC
5114   16-bit offset to symbol-entry within GOT, with PLT handling.
5115 ENUM
5116   BFD_RELOC_390_GOTPLT32
5117 ENUMDOC
5118   32-bit offset to symbol-entry within GOT, with PLT handling.
5119 ENUM
5120   BFD_RELOC_390_GOTPLT64
5121 ENUMDOC
5122   64-bit offset to symbol-entry within GOT, with PLT handling.
5123 ENUM
5124   BFD_RELOC_390_GOTPLTENT
5125 ENUMDOC
5126   32-bit rel. offset to symbol-entry within GOT, with PLT handling.
5127 ENUM
5128   BFD_RELOC_390_PLTOFF16
5129 ENUMDOC
5130   16-bit rel. offset from the GOT to a PLT entry.
5131 ENUM
5132   BFD_RELOC_390_PLTOFF32
5133 ENUMDOC
5134   32-bit rel. offset from the GOT to a PLT entry.
5135 ENUM
5136   BFD_RELOC_390_PLTOFF64
5137 ENUMDOC
5138   64-bit rel. offset from the GOT to a PLT entry.
5139
5140 ENUM
5141   BFD_RELOC_390_TLS_LOAD
5142 ENUMX
5143   BFD_RELOC_390_TLS_GDCALL
5144 ENUMX
5145   BFD_RELOC_390_TLS_LDCALL
5146 ENUMX
5147   BFD_RELOC_390_TLS_GD32
5148 ENUMX
5149   BFD_RELOC_390_TLS_GD64
5150 ENUMX
5151   BFD_RELOC_390_TLS_GOTIE12
5152 ENUMX
5153   BFD_RELOC_390_TLS_GOTIE32
5154 ENUMX
5155   BFD_RELOC_390_TLS_GOTIE64
5156 ENUMX
5157   BFD_RELOC_390_TLS_LDM32
5158 ENUMX
5159   BFD_RELOC_390_TLS_LDM64
5160 ENUMX
5161   BFD_RELOC_390_TLS_IE32
5162 ENUMX
5163   BFD_RELOC_390_TLS_IE64
5164 ENUMX
5165   BFD_RELOC_390_TLS_IEENT
5166 ENUMX
5167   BFD_RELOC_390_TLS_LE32
5168 ENUMX
5169   BFD_RELOC_390_TLS_LE64
5170 ENUMX
5171   BFD_RELOC_390_TLS_LDO32
5172 ENUMX
5173   BFD_RELOC_390_TLS_LDO64
5174 ENUMX
5175   BFD_RELOC_390_TLS_DTPMOD
5176 ENUMX
5177   BFD_RELOC_390_TLS_DTPOFF
5178 ENUMX
5179   BFD_RELOC_390_TLS_TPOFF
5180 ENUMDOC
5181   s390 tls relocations.
5182
5183 ENUM
5184   BFD_RELOC_390_20
5185 ENUMX
5186   BFD_RELOC_390_GOT20
5187 ENUMX
5188   BFD_RELOC_390_GOTPLT20
5189 ENUMX
5190   BFD_RELOC_390_TLS_GOTIE20
5191 ENUMDOC
5192   Long displacement extension.
5193
5194 ENUM
5195   BFD_RELOC_390_IRELATIVE
5196 ENUMDOC
5197   STT_GNU_IFUNC relocation.
5198
5199 ENUM
5200   BFD_RELOC_SCORE_GPREL15
5201 ENUMDOC
5202   Score relocations
5203   Low 16 bit for load/store
5204 ENUM
5205   BFD_RELOC_SCORE_DUMMY2
5206 ENUMX
5207   BFD_RELOC_SCORE_JMP
5208 ENUMDOC
5209   This is a 24-bit reloc with the right 1 bit assumed to be 0
5210 ENUM
5211   BFD_RELOC_SCORE_BRANCH
5212 ENUMDOC
5213   This is a 19-bit reloc with the right 1 bit assumed to be 0
5214 ENUM
5215   BFD_RELOC_SCORE_IMM30
5216 ENUMDOC
5217   This is a 32-bit reloc for 48-bit instructions.
5218 ENUM
5219   BFD_RELOC_SCORE_IMM32
5220 ENUMDOC
5221   This is a 32-bit reloc for 48-bit instructions.
5222 ENUM
5223   BFD_RELOC_SCORE16_JMP
5224 ENUMDOC
5225   This is a 11-bit reloc with the right 1 bit assumed to be 0
5226 ENUM
5227   BFD_RELOC_SCORE16_BRANCH
5228 ENUMDOC
5229   This is a 8-bit reloc with the right 1 bit assumed to be 0
5230 ENUM
5231   BFD_RELOC_SCORE_BCMP
5232 ENUMDOC
5233    This is a 9-bit reloc with the right 1 bit assumed to be 0
5234 ENUM
5235   BFD_RELOC_SCORE_GOT15
5236 ENUMX
5237   BFD_RELOC_SCORE_GOT_LO16
5238 ENUMX
5239   BFD_RELOC_SCORE_CALL15
5240 ENUMX
5241   BFD_RELOC_SCORE_DUMMY_HI16
5242 ENUMDOC
5243   Undocumented Score relocs
5244
5245 ENUM
5246   BFD_RELOC_IP2K_FR9
5247 ENUMDOC
5248   Scenix IP2K - 9-bit register number / data address
5249 ENUM
5250   BFD_RELOC_IP2K_BANK
5251 ENUMDOC
5252   Scenix IP2K - 4-bit register/data bank number
5253 ENUM
5254   BFD_RELOC_IP2K_ADDR16CJP
5255 ENUMDOC
5256   Scenix IP2K - low 13 bits of instruction word address
5257 ENUM
5258   BFD_RELOC_IP2K_PAGE3
5259 ENUMDOC
5260   Scenix IP2K - high 3 bits of instruction word address
5261 ENUM
5262   BFD_RELOC_IP2K_LO8DATA
5263 ENUMX
5264   BFD_RELOC_IP2K_HI8DATA
5265 ENUMX
5266   BFD_RELOC_IP2K_EX8DATA
5267 ENUMDOC
5268   Scenix IP2K - ext/low/high 8 bits of data address
5269 ENUM
5270   BFD_RELOC_IP2K_LO8INSN
5271 ENUMX
5272   BFD_RELOC_IP2K_HI8INSN
5273 ENUMDOC
5274   Scenix IP2K - low/high 8 bits of instruction word address
5275 ENUM
5276   BFD_RELOC_IP2K_PC_SKIP
5277 ENUMDOC
5278   Scenix IP2K - even/odd PC modifier to modify snb pcl.0
5279 ENUM
5280   BFD_RELOC_IP2K_TEXT
5281 ENUMDOC
5282   Scenix IP2K - 16 bit word address in text section.
5283 ENUM
5284   BFD_RELOC_IP2K_FR_OFFSET
5285 ENUMDOC
5286   Scenix IP2K - 7-bit sp or dp offset
5287 ENUM
5288   BFD_RELOC_VPE4KMATH_DATA
5289 ENUMX
5290   BFD_RELOC_VPE4KMATH_INSN
5291 ENUMDOC
5292   Scenix VPE4K coprocessor - data/insn-space addressing
5293
5294 ENUM
5295   BFD_RELOC_VTABLE_INHERIT
5296 ENUMX
5297   BFD_RELOC_VTABLE_ENTRY
5298 ENUMDOC
5299   These two relocations are used by the linker to determine which of
5300   the entries in a C++ virtual function table are actually used.  When
5301   the --gc-sections option is given, the linker will zero out the entries
5302   that are not used, so that the code for those functions need not be
5303   included in the output.
5304
5305   VTABLE_INHERIT is a zero-space relocation used to describe to the
5306   linker the inheritance tree of a C++ virtual function table.  The
5307   relocation's symbol should be the parent class' vtable, and the
5308   relocation should be located at the child vtable.
5309
5310   VTABLE_ENTRY is a zero-space relocation that describes the use of a
5311   virtual function table entry.  The reloc's symbol should refer to the
5312   table of the class mentioned in the code.  Off of that base, an offset
5313   describes the entry that is being used.  For Rela hosts, this offset
5314   is stored in the reloc's addend.  For Rel hosts, we are forced to put
5315   this offset in the reloc's section offset.
5316
5317 ENUM
5318   BFD_RELOC_IA64_IMM14
5319 ENUMX
5320   BFD_RELOC_IA64_IMM22
5321 ENUMX
5322   BFD_RELOC_IA64_IMM64
5323 ENUMX
5324   BFD_RELOC_IA64_DIR32MSB
5325 ENUMX
5326   BFD_RELOC_IA64_DIR32LSB
5327 ENUMX
5328   BFD_RELOC_IA64_DIR64MSB
5329 ENUMX
5330   BFD_RELOC_IA64_DIR64LSB
5331 ENUMX
5332   BFD_RELOC_IA64_GPREL22
5333 ENUMX
5334   BFD_RELOC_IA64_GPREL64I
5335 ENUMX
5336   BFD_RELOC_IA64_GPREL32MSB
5337 ENUMX
5338   BFD_RELOC_IA64_GPREL32LSB
5339 ENUMX
5340   BFD_RELOC_IA64_GPREL64MSB
5341 ENUMX
5342   BFD_RELOC_IA64_GPREL64LSB
5343 ENUMX
5344   BFD_RELOC_IA64_LTOFF22
5345 ENUMX
5346   BFD_RELOC_IA64_LTOFF64I
5347 ENUMX
5348   BFD_RELOC_IA64_PLTOFF22
5349 ENUMX
5350   BFD_RELOC_IA64_PLTOFF64I
5351 ENUMX
5352   BFD_RELOC_IA64_PLTOFF64MSB
5353 ENUMX
5354   BFD_RELOC_IA64_PLTOFF64LSB
5355 ENUMX
5356   BFD_RELOC_IA64_FPTR64I
5357 ENUMX
5358   BFD_RELOC_IA64_FPTR32MSB
5359 ENUMX
5360   BFD_RELOC_IA64_FPTR32LSB
5361 ENUMX
5362   BFD_RELOC_IA64_FPTR64MSB
5363 ENUMX
5364   BFD_RELOC_IA64_FPTR64LSB
5365 ENUMX
5366   BFD_RELOC_IA64_PCREL21B
5367 ENUMX
5368   BFD_RELOC_IA64_PCREL21BI
5369 ENUMX
5370   BFD_RELOC_IA64_PCREL21M
5371 ENUMX
5372   BFD_RELOC_IA64_PCREL21F
5373 ENUMX
5374   BFD_RELOC_IA64_PCREL22
5375 ENUMX
5376   BFD_RELOC_IA64_PCREL60B
5377 ENUMX
5378   BFD_RELOC_IA64_PCREL64I
5379 ENUMX
5380   BFD_RELOC_IA64_PCREL32MSB
5381 ENUMX
5382   BFD_RELOC_IA64_PCREL32LSB
5383 ENUMX
5384   BFD_RELOC_IA64_PCREL64MSB
5385 ENUMX
5386   BFD_RELOC_IA64_PCREL64LSB
5387 ENUMX
5388   BFD_RELOC_IA64_LTOFF_FPTR22
5389 ENUMX
5390   BFD_RELOC_IA64_LTOFF_FPTR64I
5391 ENUMX
5392   BFD_RELOC_IA64_LTOFF_FPTR32MSB
5393 ENUMX
5394   BFD_RELOC_IA64_LTOFF_FPTR32LSB
5395 ENUMX
5396   BFD_RELOC_IA64_LTOFF_FPTR64MSB
5397 ENUMX
5398   BFD_RELOC_IA64_LTOFF_FPTR64LSB
5399 ENUMX
5400   BFD_RELOC_IA64_SEGREL32MSB
5401 ENUMX
5402   BFD_RELOC_IA64_SEGREL32LSB
5403 ENUMX
5404   BFD_RELOC_IA64_SEGREL64MSB
5405 ENUMX
5406   BFD_RELOC_IA64_SEGREL64LSB
5407 ENUMX
5408   BFD_RELOC_IA64_SECREL32MSB
5409 ENUMX
5410   BFD_RELOC_IA64_SECREL32LSB
5411 ENUMX
5412   BFD_RELOC_IA64_SECREL64MSB
5413 ENUMX
5414   BFD_RELOC_IA64_SECREL64LSB
5415 ENUMX
5416   BFD_RELOC_IA64_REL32MSB
5417 ENUMX
5418   BFD_RELOC_IA64_REL32LSB
5419 ENUMX
5420   BFD_RELOC_IA64_REL64MSB
5421 ENUMX
5422   BFD_RELOC_IA64_REL64LSB
5423 ENUMX
5424   BFD_RELOC_IA64_LTV32MSB
5425 ENUMX
5426   BFD_RELOC_IA64_LTV32LSB
5427 ENUMX
5428   BFD_RELOC_IA64_LTV64MSB
5429 ENUMX
5430   BFD_RELOC_IA64_LTV64LSB
5431 ENUMX
5432   BFD_RELOC_IA64_IPLTMSB
5433 ENUMX
5434   BFD_RELOC_IA64_IPLTLSB
5435 ENUMX
5436   BFD_RELOC_IA64_COPY
5437 ENUMX
5438   BFD_RELOC_IA64_LTOFF22X
5439 ENUMX
5440   BFD_RELOC_IA64_LDXMOV
5441 ENUMX
5442   BFD_RELOC_IA64_TPREL14
5443 ENUMX
5444   BFD_RELOC_IA64_TPREL22
5445 ENUMX
5446   BFD_RELOC_IA64_TPREL64I
5447 ENUMX
5448   BFD_RELOC_IA64_TPREL64MSB
5449 ENUMX
5450   BFD_RELOC_IA64_TPREL64LSB
5451 ENUMX
5452   BFD_RELOC_IA64_LTOFF_TPREL22
5453 ENUMX
5454   BFD_RELOC_IA64_DTPMOD64MSB
5455 ENUMX
5456   BFD_RELOC_IA64_DTPMOD64LSB
5457 ENUMX
5458   BFD_RELOC_IA64_LTOFF_DTPMOD22
5459 ENUMX
5460   BFD_RELOC_IA64_DTPREL14
5461 ENUMX
5462   BFD_RELOC_IA64_DTPREL22
5463 ENUMX
5464   BFD_RELOC_IA64_DTPREL64I
5465 ENUMX
5466   BFD_RELOC_IA64_DTPREL32MSB
5467 ENUMX
5468   BFD_RELOC_IA64_DTPREL32LSB
5469 ENUMX
5470   BFD_RELOC_IA64_DTPREL64MSB
5471 ENUMX
5472   BFD_RELOC_IA64_DTPREL64LSB
5473 ENUMX
5474   BFD_RELOC_IA64_LTOFF_DTPREL22
5475 ENUMDOC
5476   Intel IA64 Relocations.
5477
5478 ENUM
5479   BFD_RELOC_M68HC11_HI8
5480 ENUMDOC
5481   Motorola 68HC11 reloc.
5482   This is the 8 bit high part of an absolute address.
5483 ENUM
5484   BFD_RELOC_M68HC11_LO8
5485 ENUMDOC
5486   Motorola 68HC11 reloc.
5487   This is the 8 bit low part of an absolute address.
5488 ENUM
5489   BFD_RELOC_M68HC11_3B
5490 ENUMDOC
5491   Motorola 68HC11 reloc.
5492   This is the 3 bit of a value.
5493 ENUM
5494   BFD_RELOC_M68HC11_RL_JUMP
5495 ENUMDOC
5496   Motorola 68HC11 reloc.
5497   This reloc marks the beginning of a jump/call instruction.
5498   It is used for linker relaxation to correctly identify beginning
5499   of instruction and change some branches to use PC-relative
5500   addressing mode.
5501 ENUM
5502   BFD_RELOC_M68HC11_RL_GROUP
5503 ENUMDOC
5504   Motorola 68HC11 reloc.
5505   This reloc marks a group of several instructions that gcc generates
5506   and for which the linker relaxation pass can modify and/or remove
5507   some of them.
5508 ENUM
5509   BFD_RELOC_M68HC11_LO16
5510 ENUMDOC
5511   Motorola 68HC11 reloc.
5512   This is the 16-bit lower part of an address.  It is used for 'call'
5513   instruction to specify the symbol address without any special
5514   transformation (due to memory bank window).
5515 ENUM
5516   BFD_RELOC_M68HC11_PAGE
5517 ENUMDOC
5518   Motorola 68HC11 reloc.
5519   This is a 8-bit reloc that specifies the page number of an address.
5520   It is used by 'call' instruction to specify the page number of
5521   the symbol.
5522 ENUM
5523   BFD_RELOC_M68HC11_24
5524 ENUMDOC
5525   Motorola 68HC11 reloc.
5526   This is a 24-bit reloc that represents the address with a 16-bit
5527   value and a 8-bit page number.  The symbol address is transformed
5528   to follow the 16K memory bank of 68HC12 (seen as mapped in the window).
5529 ENUM
5530   BFD_RELOC_M68HC12_5B
5531 ENUMDOC
5532   Motorola 68HC12 reloc.
5533   This is the 5 bits of a value.
5534 ENUM
5535   BFD_RELOC_XGATE_RL_JUMP
5536 ENUMDOC
5537   Freescale XGATE reloc.
5538   This reloc marks the beginning of a bra/jal instruction.
5539 ENUM
5540   BFD_RELOC_XGATE_RL_GROUP
5541 ENUMDOC
5542   Freescale XGATE reloc.
5543   This reloc marks a group of several instructions that gcc generates
5544   and for which the linker relaxation pass can modify and/or remove
5545   some of them.
5546 ENUM
5547   BFD_RELOC_XGATE_LO16
5548 ENUMDOC
5549   Freescale XGATE reloc.
5550   This is the 16-bit lower part of an address.  It is used for the '16-bit'
5551   instructions.
5552 ENUM
5553   BFD_RELOC_XGATE_GPAGE
5554 ENUMDOC
5555   Freescale XGATE reloc.
5556 ENUM
5557   BFD_RELOC_XGATE_24
5558 ENUMDOC
5559   Freescale XGATE reloc.
5560 ENUM
5561   BFD_RELOC_XGATE_PCREL_9
5562 ENUMDOC
5563   Freescale XGATE reloc.
5564   This is a 9-bit pc-relative reloc.
5565 ENUM
5566   BFD_RELOC_XGATE_PCREL_10
5567 ENUMDOC
5568   Freescale XGATE reloc.
5569   This is a 10-bit pc-relative reloc.
5570 ENUM
5571   BFD_RELOC_XGATE_IMM8_LO
5572 ENUMDOC
5573   Freescale XGATE reloc.
5574   This is the 16-bit lower part of an address.  It is used for the '16-bit'
5575   instructions.
5576 ENUM
5577   BFD_RELOC_XGATE_IMM8_HI
5578 ENUMDOC
5579   Freescale XGATE reloc.
5580   This is the 16-bit higher part of an address.  It is used for the '16-bit'
5581   instructions.
5582 ENUM
5583   BFD_RELOC_XGATE_IMM3
5584 ENUMDOC
5585   Freescale XGATE reloc.
5586   This is a 3-bit pc-relative reloc.
5587 ENUM
5588   BFD_RELOC_XGATE_IMM4
5589 ENUMDOC
5590   Freescale XGATE reloc.
5591   This is a 4-bit pc-relative reloc.
5592 ENUM
5593   BFD_RELOC_XGATE_IMM5
5594 ENUMDOC
5595   Freescale XGATE reloc.
5596   This is a 5-bit pc-relative reloc.
5597 ENUM
5598   BFD_RELOC_M68HC12_9B
5599 ENUMDOC
5600   Motorola 68HC12 reloc.
5601   This is the 9 bits of a value.
5602 ENUM
5603   BFD_RELOC_M68HC12_16B
5604 ENUMDOC
5605   Motorola 68HC12 reloc.
5606   This is the 16 bits of a value.
5607 ENUM
5608   BFD_RELOC_M68HC12_9_PCREL
5609 ENUMDOC
5610   Motorola 68HC12/XGATE reloc.
5611   This is a PCREL9 branch.
5612 ENUM
5613   BFD_RELOC_M68HC12_10_PCREL
5614 ENUMDOC
5615   Motorola 68HC12/XGATE reloc.
5616   This is a PCREL10 branch.
5617 ENUM
5618   BFD_RELOC_M68HC12_LO8XG
5619 ENUMDOC
5620   Motorola 68HC12/XGATE reloc.
5621   This is the 8 bit low part of an absolute address and immediately precedes
5622   a matching HI8XG part.
5623 ENUM
5624   BFD_RELOC_M68HC12_HI8XG
5625 ENUMDOC
5626   Motorola 68HC12/XGATE reloc.
5627   This is the 8 bit high part of an absolute address and immediately follows
5628   a matching LO8XG part.
5629 ENUM
5630   BFD_RELOC_16C_NUM08
5631 ENUMX
5632   BFD_RELOC_16C_NUM08_C
5633 ENUMX
5634   BFD_RELOC_16C_NUM16
5635 ENUMX
5636   BFD_RELOC_16C_NUM16_C
5637 ENUMX
5638   BFD_RELOC_16C_NUM32
5639 ENUMX
5640   BFD_RELOC_16C_NUM32_C
5641 ENUMX
5642   BFD_RELOC_16C_DISP04
5643 ENUMX
5644   BFD_RELOC_16C_DISP04_C
5645 ENUMX
5646   BFD_RELOC_16C_DISP08
5647 ENUMX
5648   BFD_RELOC_16C_DISP08_C
5649 ENUMX
5650   BFD_RELOC_16C_DISP16
5651 ENUMX
5652   BFD_RELOC_16C_DISP16_C
5653 ENUMX
5654   BFD_RELOC_16C_DISP24
5655 ENUMX
5656   BFD_RELOC_16C_DISP24_C
5657 ENUMX
5658   BFD_RELOC_16C_DISP24a
5659 ENUMX
5660   BFD_RELOC_16C_DISP24a_C
5661 ENUMX
5662   BFD_RELOC_16C_REG04
5663 ENUMX
5664   BFD_RELOC_16C_REG04_C
5665 ENUMX
5666   BFD_RELOC_16C_REG04a
5667 ENUMX
5668   BFD_RELOC_16C_REG04a_C
5669 ENUMX
5670   BFD_RELOC_16C_REG14
5671 ENUMX
5672   BFD_RELOC_16C_REG14_C
5673 ENUMX
5674   BFD_RELOC_16C_REG16
5675 ENUMX
5676   BFD_RELOC_16C_REG16_C
5677 ENUMX
5678   BFD_RELOC_16C_REG20
5679 ENUMX
5680   BFD_RELOC_16C_REG20_C
5681 ENUMX
5682   BFD_RELOC_16C_ABS20
5683 ENUMX
5684   BFD_RELOC_16C_ABS20_C
5685 ENUMX
5686   BFD_RELOC_16C_ABS24
5687 ENUMX
5688   BFD_RELOC_16C_ABS24_C
5689 ENUMX
5690   BFD_RELOC_16C_IMM04
5691 ENUMX
5692   BFD_RELOC_16C_IMM04_C
5693 ENUMX
5694   BFD_RELOC_16C_IMM16
5695 ENUMX
5696   BFD_RELOC_16C_IMM16_C
5697 ENUMX
5698   BFD_RELOC_16C_IMM20
5699 ENUMX
5700   BFD_RELOC_16C_IMM20_C
5701 ENUMX
5702   BFD_RELOC_16C_IMM24
5703 ENUMX
5704   BFD_RELOC_16C_IMM24_C
5705 ENUMX
5706   BFD_RELOC_16C_IMM32
5707 ENUMX
5708   BFD_RELOC_16C_IMM32_C
5709 ENUMDOC
5710   NS CR16C Relocations.
5711
5712 ENUM
5713   BFD_RELOC_CR16_NUM8
5714 ENUMX
5715   BFD_RELOC_CR16_NUM16
5716 ENUMX
5717   BFD_RELOC_CR16_NUM32
5718 ENUMX
5719   BFD_RELOC_CR16_NUM32a
5720 ENUMX
5721   BFD_RELOC_CR16_REGREL0
5722 ENUMX
5723   BFD_RELOC_CR16_REGREL4
5724 ENUMX
5725   BFD_RELOC_CR16_REGREL4a
5726 ENUMX
5727   BFD_RELOC_CR16_REGREL14
5728 ENUMX
5729   BFD_RELOC_CR16_REGREL14a
5730 ENUMX
5731   BFD_RELOC_CR16_REGREL16
5732 ENUMX
5733   BFD_RELOC_CR16_REGREL20
5734 ENUMX
5735   BFD_RELOC_CR16_REGREL20a
5736 ENUMX
5737   BFD_RELOC_CR16_ABS20
5738 ENUMX
5739   BFD_RELOC_CR16_ABS24
5740 ENUMX
5741   BFD_RELOC_CR16_IMM4
5742 ENUMX
5743   BFD_RELOC_CR16_IMM8
5744 ENUMX
5745   BFD_RELOC_CR16_IMM16
5746 ENUMX
5747   BFD_RELOC_CR16_IMM20
5748 ENUMX
5749   BFD_RELOC_CR16_IMM24
5750 ENUMX
5751   BFD_RELOC_CR16_IMM32
5752 ENUMX
5753   BFD_RELOC_CR16_IMM32a
5754 ENUMX
5755   BFD_RELOC_CR16_DISP4
5756 ENUMX
5757   BFD_RELOC_CR16_DISP8
5758 ENUMX
5759   BFD_RELOC_CR16_DISP16
5760 ENUMX
5761   BFD_RELOC_CR16_DISP20
5762 ENUMX
5763   BFD_RELOC_CR16_DISP24
5764 ENUMX
5765   BFD_RELOC_CR16_DISP24a
5766 ENUMX
5767   BFD_RELOC_CR16_SWITCH8
5768 ENUMX
5769   BFD_RELOC_CR16_SWITCH16
5770 ENUMX
5771   BFD_RELOC_CR16_SWITCH32
5772 ENUMX
5773   BFD_RELOC_CR16_GOT_REGREL20
5774 ENUMX
5775   BFD_RELOC_CR16_GOTC_REGREL20
5776 ENUMX
5777   BFD_RELOC_CR16_GLOB_DAT
5778 ENUMDOC
5779   NS CR16 Relocations.
5780
5781 ENUM
5782   BFD_RELOC_CRX_REL4
5783 ENUMX
5784   BFD_RELOC_CRX_REL8
5785 ENUMX
5786   BFD_RELOC_CRX_REL8_CMP
5787 ENUMX
5788   BFD_RELOC_CRX_REL16
5789 ENUMX
5790   BFD_RELOC_CRX_REL24
5791 ENUMX
5792   BFD_RELOC_CRX_REL32
5793 ENUMX
5794   BFD_RELOC_CRX_REGREL12
5795 ENUMX
5796   BFD_RELOC_CRX_REGREL22
5797 ENUMX
5798   BFD_RELOC_CRX_REGREL28
5799 ENUMX
5800   BFD_RELOC_CRX_REGREL32
5801 ENUMX
5802   BFD_RELOC_CRX_ABS16
5803 ENUMX
5804   BFD_RELOC_CRX_ABS32
5805 ENUMX
5806   BFD_RELOC_CRX_NUM8
5807 ENUMX
5808   BFD_RELOC_CRX_NUM16
5809 ENUMX
5810   BFD_RELOC_CRX_NUM32
5811 ENUMX
5812   BFD_RELOC_CRX_IMM16
5813 ENUMX
5814   BFD_RELOC_CRX_IMM32
5815 ENUMX
5816   BFD_RELOC_CRX_SWITCH8
5817 ENUMX
5818   BFD_RELOC_CRX_SWITCH16
5819 ENUMX
5820   BFD_RELOC_CRX_SWITCH32
5821 ENUMDOC
5822   NS CRX Relocations.
5823
5824 ENUM
5825   BFD_RELOC_CRIS_BDISP8
5826 ENUMX
5827   BFD_RELOC_CRIS_UNSIGNED_5
5828 ENUMX
5829   BFD_RELOC_CRIS_SIGNED_6
5830 ENUMX
5831   BFD_RELOC_CRIS_UNSIGNED_6
5832 ENUMX
5833   BFD_RELOC_CRIS_SIGNED_8
5834 ENUMX
5835   BFD_RELOC_CRIS_UNSIGNED_8
5836 ENUMX
5837   BFD_RELOC_CRIS_SIGNED_16
5838 ENUMX
5839   BFD_RELOC_CRIS_UNSIGNED_16
5840 ENUMX
5841   BFD_RELOC_CRIS_LAPCQ_OFFSET
5842 ENUMX
5843   BFD_RELOC_CRIS_UNSIGNED_4
5844 ENUMDOC
5845   These relocs are only used within the CRIS assembler.  They are not
5846   (at present) written to any object files.
5847 ENUM
5848   BFD_RELOC_CRIS_COPY
5849 ENUMX
5850   BFD_RELOC_CRIS_GLOB_DAT
5851 ENUMX
5852   BFD_RELOC_CRIS_JUMP_SLOT
5853 ENUMX
5854   BFD_RELOC_CRIS_RELATIVE
5855 ENUMDOC
5856   Relocs used in ELF shared libraries for CRIS.
5857 ENUM
5858   BFD_RELOC_CRIS_32_GOT
5859 ENUMDOC
5860   32-bit offset to symbol-entry within GOT.
5861 ENUM
5862   BFD_RELOC_CRIS_16_GOT
5863 ENUMDOC
5864   16-bit offset to symbol-entry within GOT.
5865 ENUM
5866   BFD_RELOC_CRIS_32_GOTPLT
5867 ENUMDOC
5868   32-bit offset to symbol-entry within GOT, with PLT handling.
5869 ENUM
5870   BFD_RELOC_CRIS_16_GOTPLT
5871 ENUMDOC
5872   16-bit offset to symbol-entry within GOT, with PLT handling.
5873 ENUM
5874   BFD_RELOC_CRIS_32_GOTREL
5875 ENUMDOC
5876   32-bit offset to symbol, relative to GOT.
5877 ENUM
5878   BFD_RELOC_CRIS_32_PLT_GOTREL
5879 ENUMDOC
5880   32-bit offset to symbol with PLT entry, relative to GOT.
5881 ENUM
5882   BFD_RELOC_CRIS_32_PLT_PCREL
5883 ENUMDOC
5884   32-bit offset to symbol with PLT entry, relative to this relocation.
5885
5886 ENUM
5887   BFD_RELOC_CRIS_32_GOT_GD
5888 ENUMX
5889   BFD_RELOC_CRIS_16_GOT_GD
5890 ENUMX
5891   BFD_RELOC_CRIS_32_GD
5892 ENUMX
5893   BFD_RELOC_CRIS_DTP
5894 ENUMX
5895   BFD_RELOC_CRIS_32_DTPREL
5896 ENUMX
5897   BFD_RELOC_CRIS_16_DTPREL
5898 ENUMX
5899   BFD_RELOC_CRIS_32_GOT_TPREL
5900 ENUMX
5901   BFD_RELOC_CRIS_16_GOT_TPREL
5902 ENUMX
5903   BFD_RELOC_CRIS_32_TPREL
5904 ENUMX
5905   BFD_RELOC_CRIS_16_TPREL
5906 ENUMX
5907   BFD_RELOC_CRIS_DTPMOD
5908 ENUMX
5909   BFD_RELOC_CRIS_32_IE
5910 ENUMDOC
5911   Relocs used in TLS code for CRIS.
5912
5913 ENUM
5914   BFD_RELOC_860_COPY
5915 ENUMX
5916   BFD_RELOC_860_GLOB_DAT
5917 ENUMX
5918   BFD_RELOC_860_JUMP_SLOT
5919 ENUMX
5920   BFD_RELOC_860_RELATIVE
5921 ENUMX
5922   BFD_RELOC_860_PC26
5923 ENUMX
5924   BFD_RELOC_860_PLT26
5925 ENUMX
5926   BFD_RELOC_860_PC16
5927 ENUMX
5928   BFD_RELOC_860_LOW0
5929 ENUMX
5930   BFD_RELOC_860_SPLIT0
5931 ENUMX
5932   BFD_RELOC_860_LOW1
5933 ENUMX
5934   BFD_RELOC_860_SPLIT1
5935 ENUMX
5936   BFD_RELOC_860_LOW2
5937 ENUMX
5938   BFD_RELOC_860_SPLIT2
5939 ENUMX
5940   BFD_RELOC_860_LOW3
5941 ENUMX
5942   BFD_RELOC_860_LOGOT0
5943 ENUMX
5944   BFD_RELOC_860_SPGOT0
5945 ENUMX
5946   BFD_RELOC_860_LOGOT1
5947 ENUMX
5948   BFD_RELOC_860_SPGOT1
5949 ENUMX
5950   BFD_RELOC_860_LOGOTOFF0
5951 ENUMX
5952   BFD_RELOC_860_SPGOTOFF0
5953 ENUMX
5954   BFD_RELOC_860_LOGOTOFF1
5955 ENUMX
5956   BFD_RELOC_860_SPGOTOFF1
5957 ENUMX
5958   BFD_RELOC_860_LOGOTOFF2
5959 ENUMX
5960   BFD_RELOC_860_LOGOTOFF3
5961 ENUMX
5962   BFD_RELOC_860_LOPC
5963 ENUMX
5964   BFD_RELOC_860_HIGHADJ
5965 ENUMX
5966   BFD_RELOC_860_HAGOT
5967 ENUMX
5968   BFD_RELOC_860_HAGOTOFF
5969 ENUMX
5970   BFD_RELOC_860_HAPC
5971 ENUMX
5972   BFD_RELOC_860_HIGH
5973 ENUMX
5974   BFD_RELOC_860_HIGOT
5975 ENUMX
5976   BFD_RELOC_860_HIGOTOFF
5977 ENUMDOC
5978   Intel i860 Relocations.
5979
5980 ENUM
5981   BFD_RELOC_OR1K_REL_26
5982 ENUMX
5983   BFD_RELOC_OR1K_GOTPC_HI16
5984 ENUMX
5985   BFD_RELOC_OR1K_GOTPC_LO16
5986 ENUMX
5987   BFD_RELOC_OR1K_GOT16
5988 ENUMX
5989   BFD_RELOC_OR1K_PLT26
5990 ENUMX
5991   BFD_RELOC_OR1K_GOTOFF_HI16
5992 ENUMX
5993   BFD_RELOC_OR1K_GOTOFF_LO16
5994 ENUMX
5995   BFD_RELOC_OR1K_COPY
5996 ENUMX
5997   BFD_RELOC_OR1K_GLOB_DAT
5998 ENUMX
5999   BFD_RELOC_OR1K_JMP_SLOT
6000 ENUMX
6001   BFD_RELOC_OR1K_RELATIVE
6002 ENUMX
6003   BFD_RELOC_OR1K_TLS_GD_HI16
6004 ENUMX
6005   BFD_RELOC_OR1K_TLS_GD_LO16
6006 ENUMX
6007   BFD_RELOC_OR1K_TLS_LDM_HI16
6008 ENUMX
6009   BFD_RELOC_OR1K_TLS_LDM_LO16
6010 ENUMX
6011   BFD_RELOC_OR1K_TLS_LDO_HI16
6012 ENUMX
6013   BFD_RELOC_OR1K_TLS_LDO_LO16
6014 ENUMX
6015   BFD_RELOC_OR1K_TLS_IE_HI16
6016 ENUMX
6017   BFD_RELOC_OR1K_TLS_IE_LO16
6018 ENUMX
6019   BFD_RELOC_OR1K_TLS_LE_HI16
6020 ENUMX
6021   BFD_RELOC_OR1K_TLS_LE_LO16
6022 ENUMX
6023   BFD_RELOC_OR1K_TLS_TPOFF
6024 ENUMX
6025   BFD_RELOC_OR1K_TLS_DTPOFF
6026 ENUMX
6027   BFD_RELOC_OR1K_TLS_DTPMOD
6028 ENUMDOC
6029   OpenRISC 1000 Relocations.
6030
6031 ENUM
6032   BFD_RELOC_H8_DIR16A8
6033 ENUMX
6034   BFD_RELOC_H8_DIR16R8
6035 ENUMX
6036   BFD_RELOC_H8_DIR24A8
6037 ENUMX
6038   BFD_RELOC_H8_DIR24R8
6039 ENUMX
6040   BFD_RELOC_H8_DIR32A16
6041 ENUMX
6042   BFD_RELOC_H8_DISP32A16
6043 ENUMDOC
6044   H8 elf Relocations.
6045
6046 ENUM
6047   BFD_RELOC_XSTORMY16_REL_12
6048 ENUMX
6049   BFD_RELOC_XSTORMY16_12
6050 ENUMX
6051   BFD_RELOC_XSTORMY16_24
6052 ENUMX
6053   BFD_RELOC_XSTORMY16_FPTR16
6054 ENUMDOC
6055   Sony Xstormy16 Relocations.
6056
6057 ENUM
6058   BFD_RELOC_RELC
6059 ENUMDOC
6060   Self-describing complex relocations.
6061 COMMENT
6062
6063 ENUM
6064   BFD_RELOC_XC16X_PAG
6065 ENUMX
6066   BFD_RELOC_XC16X_POF
6067 ENUMX
6068   BFD_RELOC_XC16X_SEG
6069 ENUMX
6070   BFD_RELOC_XC16X_SOF
6071 ENUMDOC
6072   Infineon Relocations.
6073
6074 ENUM
6075   BFD_RELOC_VAX_GLOB_DAT
6076 ENUMX
6077   BFD_RELOC_VAX_JMP_SLOT
6078 ENUMX
6079   BFD_RELOC_VAX_RELATIVE
6080 ENUMDOC
6081   Relocations used by VAX ELF.
6082
6083 ENUM
6084   BFD_RELOC_MT_PC16
6085 ENUMDOC
6086   Morpho MT - 16 bit immediate relocation.
6087 ENUM
6088   BFD_RELOC_MT_HI16
6089 ENUMDOC
6090   Morpho MT - Hi 16 bits of an address.
6091 ENUM
6092   BFD_RELOC_MT_LO16
6093 ENUMDOC
6094   Morpho MT - Low 16 bits of an address.
6095 ENUM
6096   BFD_RELOC_MT_GNU_VTINHERIT
6097 ENUMDOC
6098   Morpho MT - Used to tell the linker which vtable entries are used.
6099 ENUM
6100   BFD_RELOC_MT_GNU_VTENTRY
6101 ENUMDOC
6102   Morpho MT - Used to tell the linker which vtable entries are used.
6103 ENUM
6104   BFD_RELOC_MT_PCINSN8
6105 ENUMDOC
6106   Morpho MT - 8 bit immediate relocation.
6107
6108 ENUM
6109   BFD_RELOC_MSP430_10_PCREL
6110 ENUMX
6111   BFD_RELOC_MSP430_16_PCREL
6112 ENUMX
6113   BFD_RELOC_MSP430_16
6114 ENUMX
6115   BFD_RELOC_MSP430_16_PCREL_BYTE
6116 ENUMX
6117   BFD_RELOC_MSP430_16_BYTE
6118 ENUMX
6119   BFD_RELOC_MSP430_2X_PCREL
6120 ENUMX
6121   BFD_RELOC_MSP430_RL_PCREL
6122 ENUMX
6123   BFD_RELOC_MSP430_ABS8
6124 ENUMX
6125   BFD_RELOC_MSP430X_PCR20_EXT_SRC
6126 ENUMX
6127   BFD_RELOC_MSP430X_PCR20_EXT_DST
6128 ENUMX
6129   BFD_RELOC_MSP430X_PCR20_EXT_ODST
6130 ENUMX
6131   BFD_RELOC_MSP430X_ABS20_EXT_SRC
6132 ENUMX
6133   BFD_RELOC_MSP430X_ABS20_EXT_DST
6134 ENUMX
6135   BFD_RELOC_MSP430X_ABS20_EXT_ODST
6136 ENUMX
6137   BFD_RELOC_MSP430X_ABS20_ADR_SRC
6138 ENUMX
6139   BFD_RELOC_MSP430X_ABS20_ADR_DST
6140 ENUMX
6141   BFD_RELOC_MSP430X_PCR16
6142 ENUMX
6143   BFD_RELOC_MSP430X_PCR20_CALL
6144 ENUMX
6145   BFD_RELOC_MSP430X_ABS16
6146 ENUMX
6147   BFD_RELOC_MSP430_ABS_HI16
6148 ENUMX
6149   BFD_RELOC_MSP430_PREL31
6150 ENUMX
6151   BFD_RELOC_MSP430_SYM_DIFF
6152 ENUMDOC
6153   msp430 specific relocation codes
6154
6155 ENUM
6156   BFD_RELOC_NIOS2_S16
6157 ENUMX
6158   BFD_RELOC_NIOS2_U16
6159 ENUMX
6160   BFD_RELOC_NIOS2_CALL26
6161 ENUMX
6162   BFD_RELOC_NIOS2_IMM5
6163 ENUMX
6164   BFD_RELOC_NIOS2_CACHE_OPX
6165 ENUMX
6166   BFD_RELOC_NIOS2_IMM6
6167 ENUMX
6168   BFD_RELOC_NIOS2_IMM8
6169 ENUMX
6170   BFD_RELOC_NIOS2_HI16
6171 ENUMX
6172   BFD_RELOC_NIOS2_LO16
6173 ENUMX
6174   BFD_RELOC_NIOS2_HIADJ16
6175 ENUMX
6176   BFD_RELOC_NIOS2_GPREL
6177 ENUMX
6178   BFD_RELOC_NIOS2_UJMP
6179 ENUMX
6180   BFD_RELOC_NIOS2_CJMP
6181 ENUMX
6182   BFD_RELOC_NIOS2_CALLR
6183 ENUMX
6184   BFD_RELOC_NIOS2_ALIGN
6185 ENUMX
6186   BFD_RELOC_NIOS2_GOT16
6187 ENUMX
6188   BFD_RELOC_NIOS2_CALL16
6189 ENUMX
6190   BFD_RELOC_NIOS2_GOTOFF_LO
6191 ENUMX
6192   BFD_RELOC_NIOS2_GOTOFF_HA
6193 ENUMX
6194   BFD_RELOC_NIOS2_PCREL_LO
6195 ENUMX
6196   BFD_RELOC_NIOS2_PCREL_HA
6197 ENUMX
6198   BFD_RELOC_NIOS2_TLS_GD16
6199 ENUMX
6200   BFD_RELOC_NIOS2_TLS_LDM16
6201 ENUMX
6202   BFD_RELOC_NIOS2_TLS_LDO16
6203 ENUMX
6204   BFD_RELOC_NIOS2_TLS_IE16
6205 ENUMX
6206   BFD_RELOC_NIOS2_TLS_LE16
6207 ENUMX
6208   BFD_RELOC_NIOS2_TLS_DTPMOD
6209 ENUMX
6210   BFD_RELOC_NIOS2_TLS_DTPREL
6211 ENUMX
6212   BFD_RELOC_NIOS2_TLS_TPREL
6213 ENUMX
6214   BFD_RELOC_NIOS2_COPY
6215 ENUMX
6216   BFD_RELOC_NIOS2_GLOB_DAT
6217 ENUMX
6218   BFD_RELOC_NIOS2_JUMP_SLOT
6219 ENUMX
6220   BFD_RELOC_NIOS2_RELATIVE
6221 ENUMX
6222   BFD_RELOC_NIOS2_GOTOFF
6223 ENUMX
6224   BFD_RELOC_NIOS2_CALL26_NOAT
6225 ENUMX
6226   BFD_RELOC_NIOS2_GOT_LO
6227 ENUMX
6228   BFD_RELOC_NIOS2_GOT_HA
6229 ENUMX
6230   BFD_RELOC_NIOS2_CALL_LO
6231 ENUMX
6232   BFD_RELOC_NIOS2_CALL_HA
6233 ENUMDOC
6234   Relocations used by the Altera Nios II core.
6235
6236 ENUM
6237   BFD_RELOC_IQ2000_OFFSET_16
6238 ENUMX
6239   BFD_RELOC_IQ2000_OFFSET_21
6240 ENUMX
6241   BFD_RELOC_IQ2000_UHI16
6242 ENUMDOC
6243   IQ2000 Relocations.
6244
6245 ENUM
6246   BFD_RELOC_XTENSA_RTLD
6247 ENUMDOC
6248   Special Xtensa relocation used only by PLT entries in ELF shared
6249   objects to indicate that the runtime linker should set the value
6250   to one of its own internal functions or data structures.
6251 ENUM
6252   BFD_RELOC_XTENSA_GLOB_DAT
6253 ENUMX
6254   BFD_RELOC_XTENSA_JMP_SLOT
6255 ENUMX
6256   BFD_RELOC_XTENSA_RELATIVE
6257 ENUMDOC
6258   Xtensa relocations for ELF shared objects.
6259 ENUM
6260   BFD_RELOC_XTENSA_PLT
6261 ENUMDOC
6262   Xtensa relocation used in ELF object files for symbols that may require
6263   PLT entries.  Otherwise, this is just a generic 32-bit relocation.
6264 ENUM
6265   BFD_RELOC_XTENSA_DIFF8
6266 ENUMX
6267   BFD_RELOC_XTENSA_DIFF16
6268 ENUMX
6269   BFD_RELOC_XTENSA_DIFF32
6270 ENUMDOC
6271   Xtensa relocations to mark the difference of two local symbols.
6272   These are only needed to support linker relaxation and can be ignored
6273   when not relaxing.  The field is set to the value of the difference
6274   assuming no relaxation.  The relocation encodes the position of the
6275   first symbol so the linker can determine whether to adjust the field
6276   value.
6277 ENUM
6278   BFD_RELOC_XTENSA_SLOT0_OP
6279 ENUMX
6280   BFD_RELOC_XTENSA_SLOT1_OP
6281 ENUMX
6282   BFD_RELOC_XTENSA_SLOT2_OP
6283 ENUMX
6284   BFD_RELOC_XTENSA_SLOT3_OP
6285 ENUMX
6286   BFD_RELOC_XTENSA_SLOT4_OP
6287 ENUMX
6288   BFD_RELOC_XTENSA_SLOT5_OP
6289 ENUMX
6290   BFD_RELOC_XTENSA_SLOT6_OP
6291 ENUMX
6292   BFD_RELOC_XTENSA_SLOT7_OP
6293 ENUMX
6294   BFD_RELOC_XTENSA_SLOT8_OP
6295 ENUMX
6296   BFD_RELOC_XTENSA_SLOT9_OP
6297 ENUMX
6298   BFD_RELOC_XTENSA_SLOT10_OP
6299 ENUMX
6300   BFD_RELOC_XTENSA_SLOT11_OP
6301 ENUMX
6302   BFD_RELOC_XTENSA_SLOT12_OP
6303 ENUMX
6304   BFD_RELOC_XTENSA_SLOT13_OP
6305 ENUMX
6306   BFD_RELOC_XTENSA_SLOT14_OP
6307 ENUMDOC
6308   Generic Xtensa relocations for instruction operands.  Only the slot
6309   number is encoded in the relocation.  The relocation applies to the
6310   last PC-relative immediate operand, or if there are no PC-relative
6311   immediates, to the last immediate operand.
6312 ENUM
6313   BFD_RELOC_XTENSA_SLOT0_ALT
6314 ENUMX
6315   BFD_RELOC_XTENSA_SLOT1_ALT
6316 ENUMX
6317   BFD_RELOC_XTENSA_SLOT2_ALT
6318 ENUMX
6319   BFD_RELOC_XTENSA_SLOT3_ALT
6320 ENUMX
6321   BFD_RELOC_XTENSA_SLOT4_ALT
6322 ENUMX
6323   BFD_RELOC_XTENSA_SLOT5_ALT
6324 ENUMX
6325   BFD_RELOC_XTENSA_SLOT6_ALT
6326 ENUMX
6327   BFD_RELOC_XTENSA_SLOT7_ALT
6328 ENUMX
6329   BFD_RELOC_XTENSA_SLOT8_ALT
6330 ENUMX
6331   BFD_RELOC_XTENSA_SLOT9_ALT
6332 ENUMX
6333   BFD_RELOC_XTENSA_SLOT10_ALT
6334 ENUMX
6335   BFD_RELOC_XTENSA_SLOT11_ALT
6336 ENUMX
6337   BFD_RELOC_XTENSA_SLOT12_ALT
6338 ENUMX
6339   BFD_RELOC_XTENSA_SLOT13_ALT
6340 ENUMX
6341   BFD_RELOC_XTENSA_SLOT14_ALT
6342 ENUMDOC
6343   Alternate Xtensa relocations.  Only the slot is encoded in the
6344   relocation.  The meaning of these relocations is opcode-specific.
6345 ENUM
6346   BFD_RELOC_XTENSA_OP0
6347 ENUMX
6348   BFD_RELOC_XTENSA_OP1
6349 ENUMX
6350   BFD_RELOC_XTENSA_OP2
6351 ENUMDOC
6352   Xtensa relocations for backward compatibility.  These have all been
6353   replaced by BFD_RELOC_XTENSA_SLOT0_OP.
6354 ENUM
6355   BFD_RELOC_XTENSA_ASM_EXPAND
6356 ENUMDOC
6357   Xtensa relocation to mark that the assembler expanded the
6358   instructions from an original target.  The expansion size is
6359   encoded in the reloc size.
6360 ENUM
6361   BFD_RELOC_XTENSA_ASM_SIMPLIFY
6362 ENUMDOC
6363   Xtensa relocation to mark that the linker should simplify
6364   assembler-expanded instructions.  This is commonly used
6365   internally by the linker after analysis of a
6366   BFD_RELOC_XTENSA_ASM_EXPAND.
6367 ENUM
6368   BFD_RELOC_XTENSA_TLSDESC_FN
6369 ENUMX
6370   BFD_RELOC_XTENSA_TLSDESC_ARG
6371 ENUMX
6372   BFD_RELOC_XTENSA_TLS_DTPOFF
6373 ENUMX
6374   BFD_RELOC_XTENSA_TLS_TPOFF
6375 ENUMX
6376   BFD_RELOC_XTENSA_TLS_FUNC
6377 ENUMX
6378   BFD_RELOC_XTENSA_TLS_ARG
6379 ENUMX
6380   BFD_RELOC_XTENSA_TLS_CALL
6381 ENUMDOC
6382   Xtensa TLS relocations.
6383
6384 ENUM
6385   BFD_RELOC_Z80_DISP8
6386 ENUMDOC
6387   8 bit signed offset in (ix+d) or (iy+d).
6388
6389 ENUM
6390   BFD_RELOC_Z8K_DISP7
6391 ENUMDOC
6392   DJNZ offset.
6393 ENUM
6394   BFD_RELOC_Z8K_CALLR
6395 ENUMDOC
6396   CALR offset.
6397 ENUM
6398   BFD_RELOC_Z8K_IMM4L
6399 ENUMDOC
6400   4 bit value.
6401
6402 ENUM
6403    BFD_RELOC_LM32_CALL
6404 ENUMX
6405    BFD_RELOC_LM32_BRANCH
6406 ENUMX
6407    BFD_RELOC_LM32_16_GOT
6408 ENUMX
6409    BFD_RELOC_LM32_GOTOFF_HI16
6410 ENUMX
6411    BFD_RELOC_LM32_GOTOFF_LO16
6412 ENUMX
6413    BFD_RELOC_LM32_COPY
6414 ENUMX
6415    BFD_RELOC_LM32_GLOB_DAT
6416 ENUMX
6417    BFD_RELOC_LM32_JMP_SLOT
6418 ENUMX
6419    BFD_RELOC_LM32_RELATIVE
6420 ENUMDOC
6421  Lattice Mico32 relocations.
6422
6423 ENUM
6424   BFD_RELOC_MACH_O_SECTDIFF
6425 ENUMDOC
6426   Difference between two section addreses.  Must be followed by a
6427   BFD_RELOC_MACH_O_PAIR.
6428 ENUM
6429   BFD_RELOC_MACH_O_LOCAL_SECTDIFF
6430 ENUMDOC
6431   Like BFD_RELOC_MACH_O_SECTDIFF but with a local symbol.
6432 ENUM
6433   BFD_RELOC_MACH_O_PAIR
6434 ENUMDOC
6435   Pair of relocation.  Contains the first symbol.
6436
6437 ENUM
6438   BFD_RELOC_MACH_O_X86_64_BRANCH32
6439 ENUMX
6440   BFD_RELOC_MACH_O_X86_64_BRANCH8
6441 ENUMDOC
6442   PCREL relocations.  They are marked as branch to create PLT entry if
6443   required.
6444 ENUM
6445   BFD_RELOC_MACH_O_X86_64_GOT
6446 ENUMDOC
6447   Used when referencing a GOT entry.
6448 ENUM
6449   BFD_RELOC_MACH_O_X86_64_GOT_LOAD
6450 ENUMDOC
6451   Used when loading a GOT entry with movq.  It is specially marked so that
6452   the linker could optimize the movq to a leaq if possible.
6453 ENUM
6454   BFD_RELOC_MACH_O_X86_64_SUBTRACTOR32
6455 ENUMDOC
6456   Symbol will be substracted.  Must be followed by a BFD_RELOC_64.
6457 ENUM
6458   BFD_RELOC_MACH_O_X86_64_SUBTRACTOR64
6459 ENUMDOC
6460   Symbol will be substracted.  Must be followed by a BFD_RELOC_64.
6461 ENUM
6462   BFD_RELOC_MACH_O_X86_64_PCREL32_1
6463 ENUMDOC
6464   Same as BFD_RELOC_32_PCREL but with an implicit -1 addend.
6465 ENUM
6466   BFD_RELOC_MACH_O_X86_64_PCREL32_2
6467 ENUMDOC
6468   Same as BFD_RELOC_32_PCREL but with an implicit -2 addend.
6469 ENUM
6470   BFD_RELOC_MACH_O_X86_64_PCREL32_4
6471 ENUMDOC
6472   Same as BFD_RELOC_32_PCREL but with an implicit -4 addend.
6473
6474 ENUM
6475   BFD_RELOC_MICROBLAZE_32_LO
6476 ENUMDOC
6477   This is a 32 bit reloc for the microblaze that stores the
6478   low 16 bits of a value
6479 ENUM
6480   BFD_RELOC_MICROBLAZE_32_LO_PCREL
6481 ENUMDOC
6482   This is a 32 bit pc-relative reloc for the microblaze that
6483   stores the low 16 bits of a value
6484 ENUM
6485   BFD_RELOC_MICROBLAZE_32_ROSDA
6486 ENUMDOC
6487   This is a 32 bit reloc for the microblaze that stores a
6488   value relative to the read-only small data area anchor
6489 ENUM
6490   BFD_RELOC_MICROBLAZE_32_RWSDA
6491 ENUMDOC
6492   This is a 32 bit reloc for the microblaze that stores a
6493   value relative to the read-write small data area anchor
6494 ENUM
6495   BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM
6496 ENUMDOC
6497   This is a 32 bit reloc for the microblaze to handle
6498   expressions of the form "Symbol Op Symbol"
6499 ENUM
6500   BFD_RELOC_MICROBLAZE_64_NONE
6501 ENUMDOC
6502   This is a 64 bit reloc that stores the 32 bit pc relative
6503   value in two words (with an imm instruction).  No relocation is
6504   done here - only used for relaxing
6505 ENUM
6506   BFD_RELOC_MICROBLAZE_64_GOTPC
6507 ENUMDOC
6508   This is a 64 bit reloc that stores the 32 bit pc relative
6509   value in two words (with an imm instruction).  The relocation is
6510   PC-relative GOT offset
6511 ENUM
6512   BFD_RELOC_MICROBLAZE_64_GOT
6513 ENUMDOC
6514   This is a 64 bit reloc that stores the 32 bit pc relative
6515   value in two words (with an imm instruction).  The relocation is
6516   GOT offset
6517 ENUM
6518   BFD_RELOC_MICROBLAZE_64_PLT
6519 ENUMDOC
6520   This is a 64 bit reloc that stores the 32 bit pc relative
6521   value in two words (with an imm instruction).  The relocation is
6522   PC-relative offset into PLT
6523 ENUM
6524   BFD_RELOC_MICROBLAZE_64_GOTOFF
6525 ENUMDOC
6526   This is a 64 bit reloc that stores the 32 bit GOT relative
6527   value in two words (with an imm instruction).  The relocation is
6528   relative offset from _GLOBAL_OFFSET_TABLE_
6529 ENUM
6530   BFD_RELOC_MICROBLAZE_32_GOTOFF
6531 ENUMDOC
6532   This is a 32 bit reloc that stores the 32 bit GOT relative
6533   value in a word.  The relocation is relative offset from
6534   _GLOBAL_OFFSET_TABLE_
6535 ENUM
6536   BFD_RELOC_MICROBLAZE_COPY
6537 ENUMDOC
6538   This is used to tell the dynamic linker to copy the value out of
6539   the dynamic object into the runtime process image.
6540 ENUM
6541   BFD_RELOC_MICROBLAZE_64_TLS
6542 ENUMDOC
6543   Unused Reloc
6544 ENUM
6545   BFD_RELOC_MICROBLAZE_64_TLSGD
6546 ENUMDOC
6547   This is a 64 bit reloc that stores the 32 bit GOT relative value
6548   of the GOT TLS GD info entry in two words (with an imm instruction). The
6549   relocation is GOT offset.
6550 ENUM
6551   BFD_RELOC_MICROBLAZE_64_TLSLD
6552 ENUMDOC
6553   This is a 64 bit reloc that stores the 32 bit GOT relative value
6554   of the GOT TLS LD info entry in two words (with an imm instruction). The
6555   relocation is GOT offset.
6556 ENUM
6557   BFD_RELOC_MICROBLAZE_32_TLSDTPMOD
6558 ENUMDOC
6559   This is a 32 bit reloc that stores the Module ID to GOT(n).
6560 ENUM
6561   BFD_RELOC_MICROBLAZE_32_TLSDTPREL
6562 ENUMDOC
6563   This is a 32 bit reloc that stores TLS offset to GOT(n+1).
6564 ENUM
6565   BFD_RELOC_MICROBLAZE_64_TLSDTPREL
6566 ENUMDOC
6567   This is a 32 bit reloc for storing TLS offset to two words (uses imm
6568   instruction)
6569 ENUM
6570   BFD_RELOC_MICROBLAZE_64_TLSGOTTPREL
6571 ENUMDOC
6572   This is a 64 bit reloc that stores 32-bit thread pointer relative offset
6573   to two words (uses imm instruction).
6574 ENUM
6575   BFD_RELOC_MICROBLAZE_64_TLSTPREL
6576 ENUMDOC
6577   This is a 64 bit reloc that stores 32-bit thread pointer relative offset
6578   to two words (uses imm instruction).
6579
6580 ENUM
6581   BFD_RELOC_AARCH64_RELOC_START
6582 ENUMDOC
6583   AArch64 pseudo relocation code to mark the start of the AArch64
6584   relocation enumerators.  N.B. the order of the enumerators is
6585   important as several tables in the AArch64 bfd backend are indexed
6586   by these enumerators; make sure they are all synced.
6587 ENUM
6588   BFD_RELOC_AARCH64_NONE
6589 ENUMDOC
6590   AArch64 null relocation code.
6591 ENUM
6592   BFD_RELOC_AARCH64_64
6593 ENUMX
6594   BFD_RELOC_AARCH64_32
6595 ENUMX
6596   BFD_RELOC_AARCH64_16
6597 ENUMDOC
6598   Basic absolute relocations of N bits.  These are equivalent to
6599 BFD_RELOC_N and they were added to assist the indexing of the howto
6600 table.
6601 ENUM
6602   BFD_RELOC_AARCH64_64_PCREL
6603 ENUMX
6604   BFD_RELOC_AARCH64_32_PCREL
6605 ENUMX
6606   BFD_RELOC_AARCH64_16_PCREL
6607 ENUMDOC
6608   PC-relative relocations.  These are equivalent to BFD_RELOC_N_PCREL
6609 and they were added to assist the indexing of the howto table.
6610 ENUM
6611   BFD_RELOC_AARCH64_MOVW_G0
6612 ENUMDOC
6613   AArch64 MOV[NZK] instruction with most significant bits 0 to 15
6614   of an unsigned address/value.
6615 ENUM
6616   BFD_RELOC_AARCH64_MOVW_G0_NC
6617 ENUMDOC
6618   AArch64 MOV[NZK] instruction with less significant bits 0 to 15 of
6619   an address/value.  No overflow checking.
6620 ENUM
6621   BFD_RELOC_AARCH64_MOVW_G1
6622 ENUMDOC
6623   AArch64 MOV[NZK] instruction with most significant bits 16 to 31
6624   of an unsigned address/value.
6625 ENUM
6626   BFD_RELOC_AARCH64_MOVW_G1_NC
6627 ENUMDOC
6628   AArch64 MOV[NZK] instruction with less significant bits 16 to 31
6629   of an address/value.  No overflow checking.
6630 ENUM
6631   BFD_RELOC_AARCH64_MOVW_G2
6632 ENUMDOC
6633   AArch64 MOV[NZK] instruction with most significant bits 32 to 47
6634   of an unsigned address/value.
6635 ENUM
6636   BFD_RELOC_AARCH64_MOVW_G2_NC
6637 ENUMDOC
6638   AArch64 MOV[NZK] instruction with less significant bits 32 to 47
6639   of an address/value.  No overflow checking.
6640 ENUM
6641   BFD_RELOC_AARCH64_MOVW_G3
6642 ENUMDOC
6643   AArch64 MOV[NZK] instruction with most signficant bits 48 to 64
6644   of a signed or unsigned address/value.
6645 ENUM
6646   BFD_RELOC_AARCH64_MOVW_G0_S
6647 ENUMDOC
6648   AArch64 MOV[NZ] instruction with most significant bits 0 to 15
6649   of a signed value.  Changes instruction to MOVZ or MOVN depending on the
6650   value's sign.
6651 ENUM
6652   BFD_RELOC_AARCH64_MOVW_G1_S
6653 ENUMDOC
6654   AArch64 MOV[NZ] instruction with most significant bits 16 to 31
6655   of a signed value.  Changes instruction to MOVZ or MOVN depending on the
6656   value's sign.
6657 ENUM
6658   BFD_RELOC_AARCH64_MOVW_G2_S
6659 ENUMDOC
6660   AArch64 MOV[NZ] instruction with most significant bits 32 to 47
6661   of a signed value.  Changes instruction to MOVZ or MOVN depending on the
6662   value's sign.
6663 ENUM
6664   BFD_RELOC_AARCH64_LD_LO19_PCREL
6665 ENUMDOC
6666   AArch64 Load Literal instruction, holding a 19 bit pc-relative word
6667   offset.  The lowest two bits must be zero and are not stored in the
6668   instruction, giving a 21 bit signed byte offset.
6669 ENUM
6670   BFD_RELOC_AARCH64_ADR_LO21_PCREL
6671 ENUMDOC
6672   AArch64 ADR instruction, holding a simple 21 bit pc-relative byte offset.
6673 ENUM
6674   BFD_RELOC_AARCH64_ADR_HI21_PCREL
6675 ENUMDOC
6676   AArch64 ADRP instruction, with bits 12 to 32 of a pc-relative page
6677   offset, giving a 4KB aligned page base address.
6678 ENUM
6679   BFD_RELOC_AARCH64_ADR_HI21_NC_PCREL
6680 ENUMDOC
6681   AArch64 ADRP instruction, with bits 12 to 32 of a pc-relative page
6682   offset, giving a 4KB aligned page base address, but with no overflow
6683   checking.
6684 ENUM
6685   BFD_RELOC_AARCH64_ADD_LO12
6686 ENUMDOC
6687   AArch64 ADD immediate instruction, holding bits 0 to 11 of the address.
6688   Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6689 ENUM
6690   BFD_RELOC_AARCH64_LDST8_LO12
6691 ENUMDOC
6692   AArch64 8-bit load/store instruction, holding bits 0 to 11 of the
6693   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6694 ENUM
6695   BFD_RELOC_AARCH64_TSTBR14
6696 ENUMDOC
6697   AArch64 14 bit pc-relative test bit and branch.
6698   The lowest two bits must be zero and are not stored in the instruction,
6699   giving a 16 bit signed byte offset.
6700 ENUM
6701   BFD_RELOC_AARCH64_BRANCH19
6702 ENUMDOC
6703   AArch64 19 bit pc-relative conditional branch and compare & branch.
6704   The lowest two bits must be zero and are not stored in the instruction,
6705   giving a 21 bit signed byte offset.
6706 ENUM
6707   BFD_RELOC_AARCH64_JUMP26
6708 ENUMDOC
6709   AArch64 26 bit pc-relative unconditional branch.
6710   The lowest two bits must be zero and are not stored in the instruction,
6711   giving a 28 bit signed byte offset.
6712 ENUM
6713   BFD_RELOC_AARCH64_CALL26
6714 ENUMDOC
6715   AArch64 26 bit pc-relative unconditional branch and link.
6716   The lowest two bits must be zero and are not stored in the instruction,
6717   giving a 28 bit signed byte offset.
6718 ENUM
6719   BFD_RELOC_AARCH64_LDST16_LO12
6720 ENUMDOC
6721   AArch64 16-bit load/store instruction, holding bits 0 to 11 of the
6722   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6723 ENUM
6724   BFD_RELOC_AARCH64_LDST32_LO12
6725 ENUMDOC
6726   AArch64 32-bit load/store instruction, holding bits 0 to 11 of the
6727   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6728 ENUM
6729   BFD_RELOC_AARCH64_LDST64_LO12
6730 ENUMDOC
6731   AArch64 64-bit load/store instruction, holding bits 0 to 11 of the
6732   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6733 ENUM
6734   BFD_RELOC_AARCH64_LDST128_LO12
6735 ENUMDOC
6736   AArch64 128-bit load/store instruction, holding bits 0 to 11 of the
6737   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6738 ENUM
6739   BFD_RELOC_AARCH64_GOT_LD_PREL19
6740 ENUMDOC
6741   AArch64 Load Literal instruction, holding a 19 bit PC relative word
6742   offset of the global offset table entry for a symbol.  The lowest two
6743   bits must be zero and are not stored in the instruction, giving a 21
6744   bit signed byte offset.  This relocation type requires signed overflow
6745   checking.
6746 ENUM
6747   BFD_RELOC_AARCH64_ADR_GOT_PAGE
6748 ENUMDOC
6749   Get to the page base of the global offset table entry for a symbol as
6750   part of an ADRP instruction using a 21 bit PC relative value.Used in
6751   conjunction with BFD_RELOC_AARCH64_LD64_GOT_LO12_NC.
6752 ENUM
6753   BFD_RELOC_AARCH64_LD64_GOT_LO12_NC
6754 ENUMDOC
6755   Unsigned 12 bit byte offset for 64 bit load/store from the page of
6756   the GOT entry for this symbol.  Used in conjunction with
6757   BFD_RELOC_AARCH64_ADR_GOTPAGE.  Valid in LP64 ABI only.
6758 ENUM
6759   BFD_RELOC_AARCH64_LD32_GOT_LO12_NC
6760 ENUMDOC
6761   Unsigned 12 bit byte offset for 32 bit load/store from the page of
6762   the GOT entry for this symbol.  Used in conjunction with
6763   BFD_RELOC_AARCH64_ADR_GOTPAGE.  Valid in ILP32 ABI only.
6764 ENUM
6765   BFD_RELOC_AARCH64_TLSGD_ADR_PAGE21
6766 ENUMDOC
6767   Get to the page base of the global offset table entry for a symbols
6768   tls_index structure as part of an adrp instruction using a 21 bit PC
6769   relative value.  Used in conjunction with
6770   BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC.
6771 ENUM
6772   BFD_RELOC_AARCH64_TLSGD_ADR_PREL21
6773 ENUMDOC
6774   AArch64 TLS General Dynamic
6775 ENUM
6776   BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC
6777 ENUMDOC
6778   Unsigned 12 bit byte offset to global offset table entry for a symbols
6779   tls_index structure.  Used in conjunction with
6780   BFD_RELOC_AARCH64_TLSGD_ADR_PAGE21.
6781 ENUM
6782   BFD_RELOC_AARCH64_TLSIE_MOVW_GOTTPREL_G1
6783 ENUMDOC
6784   AArch64 TLS INITIAL EXEC relocation.
6785 ENUM
6786   BFD_RELOC_AARCH64_TLSIE_MOVW_GOTTPREL_G0_NC
6787 ENUMDOC
6788   AArch64 TLS INITIAL EXEC relocation.
6789 ENUM
6790   BFD_RELOC_AARCH64_TLSIE_ADR_GOTTPREL_PAGE21
6791 ENUMDOC
6792   AArch64 TLS INITIAL EXEC relocation.
6793 ENUM
6794   BFD_RELOC_AARCH64_TLSIE_LD64_GOTTPREL_LO12_NC
6795 ENUMDOC
6796   AArch64 TLS INITIAL EXEC relocation.
6797 ENUM
6798   BFD_RELOC_AARCH64_TLSIE_LD32_GOTTPREL_LO12_NC
6799 ENUMDOC
6800   AArch64 TLS INITIAL EXEC relocation.
6801 ENUM
6802   BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_PREL19
6803 ENUMDOC
6804   AArch64 TLS INITIAL EXEC relocation.
6805 ENUM
6806   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G2
6807 ENUMDOC
6808   AArch64 TLS LOCAL EXEC relocation.
6809 ENUM
6810   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G1
6811 ENUMDOC
6812   AArch64 TLS LOCAL EXEC relocation.
6813 ENUM
6814   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G1_NC
6815 ENUMDOC
6816   AArch64 TLS LOCAL EXEC relocation.
6817 ENUM
6818   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G0
6819 ENUMDOC
6820   AArch64 TLS LOCAL EXEC relocation.
6821 ENUM
6822   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G0_NC
6823 ENUMDOC
6824   AArch64 TLS LOCAL EXEC relocation.
6825 ENUM
6826   BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_HI12
6827 ENUMDOC
6828   AArch64 TLS LOCAL EXEC relocation.
6829 ENUM
6830   BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_LO12
6831 ENUMDOC
6832   AArch64 TLS LOCAL EXEC relocation.
6833 ENUM
6834   BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_LO12_NC
6835 ENUMDOC
6836   AArch64 TLS LOCAL EXEC relocation.
6837 ENUM
6838   BFD_RELOC_AARCH64_TLSDESC_LD_PREL19
6839 ENUMDOC
6840   AArch64 TLS DESC relocation.
6841 ENUM
6842   BFD_RELOC_AARCH64_TLSDESC_ADR_PREL21
6843 ENUMDOC
6844   AArch64 TLS DESC relocation.
6845 ENUM
6846   BFD_RELOC_AARCH64_TLSDESC_ADR_PAGE21
6847 ENUMDOC
6848   AArch64 TLS DESC relocation.
6849 ENUM
6850   BFD_RELOC_AARCH64_TLSDESC_LD64_LO12_NC
6851 ENUMDOC
6852   AArch64 TLS DESC relocation.
6853 ENUM
6854   BFD_RELOC_AARCH64_TLSDESC_LD32_LO12_NC
6855 ENUMDOC
6856   AArch64 TLS DESC relocation.
6857 ENUM
6858   BFD_RELOC_AARCH64_TLSDESC_ADD_LO12_NC
6859 ENUMDOC
6860   AArch64 TLS DESC relocation.
6861 ENUM
6862   BFD_RELOC_AARCH64_TLSDESC_OFF_G1
6863 ENUMDOC
6864   AArch64 TLS DESC relocation.
6865 ENUM
6866   BFD_RELOC_AARCH64_TLSDESC_OFF_G0_NC
6867 ENUMDOC
6868   AArch64 TLS DESC relocation.
6869 ENUM
6870   BFD_RELOC_AARCH64_TLSDESC_LDR
6871 ENUMDOC
6872   AArch64 TLS DESC relocation.
6873 ENUM
6874   BFD_RELOC_AARCH64_TLSDESC_ADD
6875 ENUMDOC
6876   AArch64 TLS DESC relocation.
6877 ENUM
6878   BFD_RELOC_AARCH64_TLSDESC_CALL
6879 ENUMDOC
6880   AArch64 TLS DESC relocation.
6881 ENUM
6882   BFD_RELOC_AARCH64_COPY
6883 ENUMDOC
6884   AArch64 TLS relocation.
6885 ENUM
6886   BFD_RELOC_AARCH64_GLOB_DAT
6887 ENUMDOC
6888   AArch64 TLS relocation.
6889 ENUM
6890   BFD_RELOC_AARCH64_JUMP_SLOT
6891 ENUMDOC
6892   AArch64 TLS relocation.
6893 ENUM
6894   BFD_RELOC_AARCH64_RELATIVE
6895 ENUMDOC
6896   AArch64 TLS relocation.
6897 ENUM
6898   BFD_RELOC_AARCH64_TLS_DTPMOD
6899 ENUMDOC
6900   AArch64 TLS relocation.
6901 ENUM
6902   BFD_RELOC_AARCH64_TLS_DTPREL
6903 ENUMDOC
6904   AArch64 TLS relocation.
6905 ENUM
6906   BFD_RELOC_AARCH64_TLS_TPREL
6907 ENUMDOC
6908   AArch64 TLS relocation.
6909 ENUM
6910   BFD_RELOC_AARCH64_TLSDESC
6911 ENUMDOC
6912   AArch64 TLS relocation.
6913 ENUM
6914   BFD_RELOC_AARCH64_IRELATIVE
6915 ENUMDOC
6916   AArch64 support for STT_GNU_IFUNC.
6917 ENUM
6918   BFD_RELOC_AARCH64_RELOC_END
6919 ENUMDOC
6920   AArch64 pseudo relocation code to mark the end of the AArch64
6921   relocation enumerators that have direct mapping to ELF reloc codes.
6922   There are a few more enumerators after this one; those are mainly
6923   used by the AArch64 assembler for the internal fixup or to select
6924   one of the above enumerators.
6925 ENUM
6926   BFD_RELOC_AARCH64_GAS_INTERNAL_FIXUP
6927 ENUMDOC
6928   AArch64 pseudo relocation code to be used internally by the AArch64
6929   assembler and not (currently) written to any object files.
6930 ENUM
6931   BFD_RELOC_AARCH64_LDST_LO12
6932 ENUMDOC
6933   AArch64 unspecified load/store instruction, holding bits 0 to 11 of the
6934   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6935 ENUM
6936   BFD_RELOC_AARCH64_LD_GOT_LO12_NC
6937 ENUMDOC
6938   AArch64 pseudo relocation code to be used internally by the AArch64
6939   assembler and not (currently) written to any object files.
6940 ENUM
6941   BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_LO12_NC
6942 ENUMDOC
6943   AArch64 pseudo relocation code to be used internally by the AArch64
6944   assembler and not (currently) written to any object files.
6945 ENUM
6946   BFD_RELOC_AARCH64_TLSDESC_LD_LO12_NC
6947 ENUMDOC
6948   AArch64 pseudo relocation code to be used internally by the AArch64
6949   assembler and not (currently) written to any object files.
6950
6951 ENUM
6952   BFD_RELOC_TILEPRO_COPY
6953 ENUMX
6954   BFD_RELOC_TILEPRO_GLOB_DAT
6955 ENUMX
6956   BFD_RELOC_TILEPRO_JMP_SLOT
6957 ENUMX
6958   BFD_RELOC_TILEPRO_RELATIVE
6959 ENUMX
6960   BFD_RELOC_TILEPRO_BROFF_X1
6961 ENUMX
6962   BFD_RELOC_TILEPRO_JOFFLONG_X1
6963 ENUMX
6964   BFD_RELOC_TILEPRO_JOFFLONG_X1_PLT
6965 ENUMX
6966   BFD_RELOC_TILEPRO_IMM8_X0
6967 ENUMX
6968   BFD_RELOC_TILEPRO_IMM8_Y0
6969 ENUMX
6970   BFD_RELOC_TILEPRO_IMM8_X1
6971 ENUMX
6972   BFD_RELOC_TILEPRO_IMM8_Y1
6973 ENUMX
6974   BFD_RELOC_TILEPRO_DEST_IMM8_X1
6975 ENUMX
6976   BFD_RELOC_TILEPRO_MT_IMM15_X1
6977 ENUMX
6978   BFD_RELOC_TILEPRO_MF_IMM15_X1
6979 ENUMX
6980   BFD_RELOC_TILEPRO_IMM16_X0
6981 ENUMX
6982   BFD_RELOC_TILEPRO_IMM16_X1
6983 ENUMX
6984   BFD_RELOC_TILEPRO_IMM16_X0_LO
6985 ENUMX
6986   BFD_RELOC_TILEPRO_IMM16_X1_LO
6987 ENUMX
6988   BFD_RELOC_TILEPRO_IMM16_X0_HI
6989 ENUMX
6990   BFD_RELOC_TILEPRO_IMM16_X1_HI
6991 ENUMX
6992   BFD_RELOC_TILEPRO_IMM16_X0_HA
6993 ENUMX
6994   BFD_RELOC_TILEPRO_IMM16_X1_HA
6995 ENUMX
6996   BFD_RELOC_TILEPRO_IMM16_X0_PCREL
6997 ENUMX
6998   BFD_RELOC_TILEPRO_IMM16_X1_PCREL
6999 ENUMX
7000   BFD_RELOC_TILEPRO_IMM16_X0_LO_PCREL
7001 ENUMX
7002   BFD_RELOC_TILEPRO_IMM16_X1_LO_PCREL
7003 ENUMX
7004   BFD_RELOC_TILEPRO_IMM16_X0_HI_PCREL
7005 ENUMX
7006   BFD_RELOC_TILEPRO_IMM16_X1_HI_PCREL
7007 ENUMX
7008   BFD_RELOC_TILEPRO_IMM16_X0_HA_PCREL
7009 ENUMX
7010   BFD_RELOC_TILEPRO_IMM16_X1_HA_PCREL
7011 ENUMX
7012   BFD_RELOC_TILEPRO_IMM16_X0_GOT
7013 ENUMX
7014   BFD_RELOC_TILEPRO_IMM16_X1_GOT
7015 ENUMX
7016   BFD_RELOC_TILEPRO_IMM16_X0_GOT_LO
7017 ENUMX
7018   BFD_RELOC_TILEPRO_IMM16_X1_GOT_LO
7019 ENUMX
7020   BFD_RELOC_TILEPRO_IMM16_X0_GOT_HI
7021 ENUMX
7022   BFD_RELOC_TILEPRO_IMM16_X1_GOT_HI
7023 ENUMX
7024   BFD_RELOC_TILEPRO_IMM16_X0_GOT_HA
7025 ENUMX
7026   BFD_RELOC_TILEPRO_IMM16_X1_GOT_HA
7027 ENUMX
7028   BFD_RELOC_TILEPRO_MMSTART_X0
7029 ENUMX
7030   BFD_RELOC_TILEPRO_MMEND_X0
7031 ENUMX
7032   BFD_RELOC_TILEPRO_MMSTART_X1
7033 ENUMX
7034   BFD_RELOC_TILEPRO_MMEND_X1
7035 ENUMX
7036   BFD_RELOC_TILEPRO_SHAMT_X0
7037 ENUMX
7038   BFD_RELOC_TILEPRO_SHAMT_X1
7039 ENUMX
7040   BFD_RELOC_TILEPRO_SHAMT_Y0
7041 ENUMX
7042   BFD_RELOC_TILEPRO_SHAMT_Y1
7043 ENUMX
7044   BFD_RELOC_TILEPRO_TLS_GD_CALL
7045 ENUMX
7046   BFD_RELOC_TILEPRO_IMM8_X0_TLS_GD_ADD
7047 ENUMX
7048   BFD_RELOC_TILEPRO_IMM8_X1_TLS_GD_ADD
7049 ENUMX
7050   BFD_RELOC_TILEPRO_IMM8_Y0_TLS_GD_ADD
7051 ENUMX
7052   BFD_RELOC_TILEPRO_IMM8_Y1_TLS_GD_ADD
7053 ENUMX
7054   BFD_RELOC_TILEPRO_TLS_IE_LOAD
7055 ENUMX
7056   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD
7057 ENUMX
7058   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD
7059 ENUMX
7060   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_LO
7061 ENUMX
7062   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_LO
7063 ENUMX
7064   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_HI
7065 ENUMX
7066   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_HI
7067 ENUMX
7068   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_HA
7069 ENUMX
7070   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_HA
7071 ENUMX
7072   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE
7073 ENUMX
7074   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE
7075 ENUMX
7076   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_LO
7077 ENUMX
7078   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_LO
7079 ENUMX
7080   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_HI
7081 ENUMX
7082   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_HI
7083 ENUMX
7084   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_HA
7085 ENUMX
7086   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_HA
7087 ENUMX
7088   BFD_RELOC_TILEPRO_TLS_DTPMOD32
7089 ENUMX
7090   BFD_RELOC_TILEPRO_TLS_DTPOFF32
7091 ENUMX
7092   BFD_RELOC_TILEPRO_TLS_TPOFF32
7093 ENUMX
7094   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE
7095 ENUMX
7096   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE
7097 ENUMX
7098   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_LO
7099 ENUMX
7100   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_LO
7101 ENUMX
7102   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_HI
7103 ENUMX
7104   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_HI
7105 ENUMX
7106   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_HA
7107 ENUMX
7108   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_HA
7109 ENUMDOC
7110   Tilera TILEPro Relocations.
7111 ENUM
7112   BFD_RELOC_TILEGX_HW0
7113 ENUMX
7114   BFD_RELOC_TILEGX_HW1
7115 ENUMX
7116   BFD_RELOC_TILEGX_HW2
7117 ENUMX
7118   BFD_RELOC_TILEGX_HW3
7119 ENUMX
7120   BFD_RELOC_TILEGX_HW0_LAST
7121 ENUMX
7122   BFD_RELOC_TILEGX_HW1_LAST
7123 ENUMX
7124   BFD_RELOC_TILEGX_HW2_LAST
7125 ENUMX
7126   BFD_RELOC_TILEGX_COPY
7127 ENUMX
7128   BFD_RELOC_TILEGX_GLOB_DAT
7129 ENUMX
7130   BFD_RELOC_TILEGX_JMP_SLOT
7131 ENUMX
7132   BFD_RELOC_TILEGX_RELATIVE
7133 ENUMX
7134   BFD_RELOC_TILEGX_BROFF_X1
7135 ENUMX
7136   BFD_RELOC_TILEGX_JUMPOFF_X1
7137 ENUMX
7138   BFD_RELOC_TILEGX_JUMPOFF_X1_PLT
7139 ENUMX
7140   BFD_RELOC_TILEGX_IMM8_X0
7141 ENUMX
7142   BFD_RELOC_TILEGX_IMM8_Y0
7143 ENUMX
7144   BFD_RELOC_TILEGX_IMM8_X1
7145 ENUMX
7146   BFD_RELOC_TILEGX_IMM8_Y1
7147 ENUMX
7148   BFD_RELOC_TILEGX_DEST_IMM8_X1
7149 ENUMX
7150   BFD_RELOC_TILEGX_MT_IMM14_X1
7151 ENUMX
7152   BFD_RELOC_TILEGX_MF_IMM14_X1
7153 ENUMX
7154   BFD_RELOC_TILEGX_MMSTART_X0
7155 ENUMX
7156   BFD_RELOC_TILEGX_MMEND_X0
7157 ENUMX
7158   BFD_RELOC_TILEGX_SHAMT_X0
7159 ENUMX
7160   BFD_RELOC_TILEGX_SHAMT_X1
7161 ENUMX
7162   BFD_RELOC_TILEGX_SHAMT_Y0
7163 ENUMX
7164   BFD_RELOC_TILEGX_SHAMT_Y1
7165 ENUMX
7166   BFD_RELOC_TILEGX_IMM16_X0_HW0
7167 ENUMX
7168   BFD_RELOC_TILEGX_IMM16_X1_HW0
7169 ENUMX
7170   BFD_RELOC_TILEGX_IMM16_X0_HW1
7171 ENUMX
7172   BFD_RELOC_TILEGX_IMM16_X1_HW1
7173 ENUMX
7174   BFD_RELOC_TILEGX_IMM16_X0_HW2
7175 ENUMX
7176   BFD_RELOC_TILEGX_IMM16_X1_HW2
7177 ENUMX
7178   BFD_RELOC_TILEGX_IMM16_X0_HW3
7179 ENUMX
7180   BFD_RELOC_TILEGX_IMM16_X1_HW3
7181 ENUMX
7182   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST
7183 ENUMX
7184   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST
7185 ENUMX
7186   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST
7187 ENUMX
7188   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST
7189 ENUMX
7190   BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST
7191 ENUMX
7192   BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST
7193 ENUMX
7194   BFD_RELOC_TILEGX_IMM16_X0_HW0_PCREL
7195 ENUMX
7196   BFD_RELOC_TILEGX_IMM16_X1_HW0_PCREL
7197 ENUMX
7198   BFD_RELOC_TILEGX_IMM16_X0_HW1_PCREL
7199 ENUMX
7200   BFD_RELOC_TILEGX_IMM16_X1_HW1_PCREL
7201 ENUMX
7202   BFD_RELOC_TILEGX_IMM16_X0_HW2_PCREL
7203 ENUMX
7204   BFD_RELOC_TILEGX_IMM16_X1_HW2_PCREL
7205 ENUMX
7206   BFD_RELOC_TILEGX_IMM16_X0_HW3_PCREL
7207 ENUMX
7208   BFD_RELOC_TILEGX_IMM16_X1_HW3_PCREL
7209 ENUMX
7210   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_PCREL
7211 ENUMX
7212   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_PCREL
7213 ENUMX
7214   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_PCREL
7215 ENUMX
7216   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_PCREL
7217 ENUMX
7218   BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST_PCREL
7219 ENUMX
7220   BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST_PCREL
7221 ENUMX
7222   BFD_RELOC_TILEGX_IMM16_X0_HW0_GOT
7223 ENUMX
7224   BFD_RELOC_TILEGX_IMM16_X1_HW0_GOT
7225 ENUMX
7226   BFD_RELOC_TILEGX_IMM16_X0_HW0_PLT_PCREL
7227 ENUMX
7228   BFD_RELOC_TILEGX_IMM16_X1_HW0_PLT_PCREL
7229 ENUMX
7230   BFD_RELOC_TILEGX_IMM16_X0_HW1_PLT_PCREL
7231 ENUMX
7232   BFD_RELOC_TILEGX_IMM16_X1_HW1_PLT_PCREL
7233 ENUMX
7234   BFD_RELOC_TILEGX_IMM16_X0_HW2_PLT_PCREL
7235 ENUMX
7236   BFD_RELOC_TILEGX_IMM16_X1_HW2_PLT_PCREL
7237 ENUMX
7238   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_GOT
7239 ENUMX
7240   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_GOT
7241 ENUMX
7242   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_GOT
7243 ENUMX
7244   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_GOT
7245 ENUMX
7246   BFD_RELOC_TILEGX_IMM16_X0_HW3_PLT_PCREL
7247 ENUMX
7248   BFD_RELOC_TILEGX_IMM16_X1_HW3_PLT_PCREL
7249 ENUMX
7250   BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_GD
7251 ENUMX
7252   BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_GD
7253 ENUMX
7254   BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_LE
7255 ENUMX
7256   BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_LE
7257 ENUMX
7258   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_LE
7259 ENUMX
7260   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_LE
7261 ENUMX
7262   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_LE
7263 ENUMX
7264   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_LE
7265 ENUMX
7266   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_GD
7267 ENUMX
7268   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_GD
7269 ENUMX
7270   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_GD
7271 ENUMX
7272   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_GD
7273 ENUMX
7274   BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_IE
7275 ENUMX
7276   BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_IE
7277 ENUMX
7278   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_PLT_PCREL
7279 ENUMX
7280   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_PLT_PCREL
7281 ENUMX
7282   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_PLT_PCREL
7283 ENUMX
7284   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_PLT_PCREL
7285 ENUMX
7286   BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST_PLT_PCREL
7287 ENUMX
7288   BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST_PLT_PCREL
7289 ENUMX
7290   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_IE
7291 ENUMX
7292   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_IE
7293 ENUMX
7294   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_IE
7295 ENUMX
7296   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_IE
7297 ENUMX
7298   BFD_RELOC_TILEGX_TLS_DTPMOD64
7299 ENUMX
7300   BFD_RELOC_TILEGX_TLS_DTPOFF64
7301 ENUMX
7302   BFD_RELOC_TILEGX_TLS_TPOFF64
7303 ENUMX
7304   BFD_RELOC_TILEGX_TLS_DTPMOD32
7305 ENUMX
7306   BFD_RELOC_TILEGX_TLS_DTPOFF32
7307 ENUMX
7308   BFD_RELOC_TILEGX_TLS_TPOFF32
7309 ENUMX
7310   BFD_RELOC_TILEGX_TLS_GD_CALL
7311 ENUMX
7312   BFD_RELOC_TILEGX_IMM8_X0_TLS_GD_ADD
7313 ENUMX
7314   BFD_RELOC_TILEGX_IMM8_X1_TLS_GD_ADD
7315 ENUMX
7316   BFD_RELOC_TILEGX_IMM8_Y0_TLS_GD_ADD
7317 ENUMX
7318   BFD_RELOC_TILEGX_IMM8_Y1_TLS_GD_ADD
7319 ENUMX
7320   BFD_RELOC_TILEGX_TLS_IE_LOAD
7321 ENUMX
7322   BFD_RELOC_TILEGX_IMM8_X0_TLS_ADD
7323 ENUMX
7324   BFD_RELOC_TILEGX_IMM8_X1_TLS_ADD
7325 ENUMX
7326   BFD_RELOC_TILEGX_IMM8_Y0_TLS_ADD
7327 ENUMX
7328   BFD_RELOC_TILEGX_IMM8_Y1_TLS_ADD
7329 ENUMDOC
7330   Tilera TILE-Gx Relocations.
7331
7332 ENUM
7333   BFD_RELOC_EPIPHANY_SIMM8
7334 ENUMDOC
7335   Adapteva EPIPHANY - 8 bit signed pc-relative displacement
7336 ENUM
7337   BFD_RELOC_EPIPHANY_SIMM24
7338 ENUMDOC
7339   Adapteva EPIPHANY - 24 bit signed pc-relative displacement
7340 ENUM
7341   BFD_RELOC_EPIPHANY_HIGH
7342 ENUMDOC
7343   Adapteva EPIPHANY - 16 most-significant bits of absolute address
7344 ENUM
7345   BFD_RELOC_EPIPHANY_LOW
7346 ENUMDOC
7347   Adapteva EPIPHANY - 16 least-significant bits of absolute address
7348 ENUM
7349   BFD_RELOC_EPIPHANY_SIMM11
7350 ENUMDOC
7351   Adapteva EPIPHANY - 11 bit signed number - add/sub immediate
7352 ENUM
7353   BFD_RELOC_EPIPHANY_IMM11
7354 ENUMDOC
7355   Adapteva EPIPHANY - 11 bit sign-magnitude number (ld/st displacement)
7356 ENUM
7357   BFD_RELOC_EPIPHANY_IMM8
7358 ENUMDOC
7359   Adapteva EPIPHANY - 8 bit immediate for 16 bit mov instruction.
7360
7361 ENUM
7362   BFD_RELOC_VISIUM_HI16
7363 ENUMX
7364   BFD_RELOC_VISIUM_LO16
7365 ENUMX
7366   BFD_RELOC_VISIUM_IM16
7367 ENUMX
7368   BFD_RELOC_VISIUM_REL16
7369 ENUMX
7370   BFD_RELOC_VISIUM_HI16_PCREL
7371 ENUMX
7372   BFD_RELOC_VISIUM_LO16_PCREL
7373 ENUMX
7374   BFD_RELOC_VISIUM_IM16_PCREL
7375 ENUMDOC
7376   Visium Relocations.
7377
7378 ENDSENUM
7379   BFD_RELOC_UNUSED
7380 CODE_FRAGMENT
7381 .
7382 .typedef enum bfd_reloc_code_real bfd_reloc_code_real_type;
7383 */
7384
7385 /*
7386 FUNCTION
7387         bfd_reloc_type_lookup
7388         bfd_reloc_name_lookup
7389
7390 SYNOPSIS
7391         reloc_howto_type *bfd_reloc_type_lookup
7392           (bfd *abfd, bfd_reloc_code_real_type code);
7393         reloc_howto_type *bfd_reloc_name_lookup
7394           (bfd *abfd, const char *reloc_name);
7395
7396 DESCRIPTION
7397         Return a pointer to a howto structure which, when
7398         invoked, will perform the relocation @var{code} on data from the
7399         architecture noted.
7400
7401 */
7402
7403 reloc_howto_type *
7404 bfd_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
7405 {
7406   return BFD_SEND (abfd, reloc_type_lookup, (abfd, code));
7407 }
7408
7409 reloc_howto_type *
7410 bfd_reloc_name_lookup (bfd *abfd, const char *reloc_name)
7411 {
7412   return BFD_SEND (abfd, reloc_name_lookup, (abfd, reloc_name));
7413 }
7414
7415 static reloc_howto_type bfd_howto_32 =
7416 HOWTO (0, 00, 2, 32, FALSE, 0, complain_overflow_dont, 0, "VRT32", FALSE, 0xffffffff, 0xffffffff, TRUE);
7417
7418 /*
7419 INTERNAL_FUNCTION
7420         bfd_default_reloc_type_lookup
7421
7422 SYNOPSIS
7423         reloc_howto_type *bfd_default_reloc_type_lookup
7424           (bfd *abfd, bfd_reloc_code_real_type  code);
7425
7426 DESCRIPTION
7427         Provides a default relocation lookup routine for any architecture.
7428
7429 */
7430
7431 reloc_howto_type *
7432 bfd_default_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
7433 {
7434   switch (code)
7435     {
7436     case BFD_RELOC_CTOR:
7437       /* The type of reloc used in a ctor, which will be as wide as the
7438          address - so either a 64, 32, or 16 bitter.  */
7439       switch (bfd_arch_bits_per_address (abfd))
7440         {
7441         case 64:
7442           BFD_FAIL ();
7443         case 32:
7444           return &bfd_howto_32;
7445         case 16:
7446           BFD_FAIL ();
7447         default:
7448           BFD_FAIL ();
7449         }
7450     default:
7451       BFD_FAIL ();
7452     }
7453   return NULL;
7454 }
7455
7456 /*
7457 FUNCTION
7458         bfd_get_reloc_code_name
7459
7460 SYNOPSIS
7461         const char *bfd_get_reloc_code_name (bfd_reloc_code_real_type code);
7462
7463 DESCRIPTION
7464         Provides a printable name for the supplied relocation code.
7465         Useful mainly for printing error messages.
7466 */
7467
7468 const char *
7469 bfd_get_reloc_code_name (bfd_reloc_code_real_type code)
7470 {
7471   if (code > BFD_RELOC_UNUSED)
7472     return 0;
7473   return bfd_reloc_code_real_names[code];
7474 }
7475
7476 /*
7477 INTERNAL_FUNCTION
7478         bfd_generic_relax_section
7479
7480 SYNOPSIS
7481         bfd_boolean bfd_generic_relax_section
7482           (bfd *abfd,
7483            asection *section,
7484            struct bfd_link_info *,
7485            bfd_boolean *);
7486
7487 DESCRIPTION
7488         Provides default handling for relaxing for back ends which
7489         don't do relaxing.
7490 */
7491
7492 bfd_boolean
7493 bfd_generic_relax_section (bfd *abfd ATTRIBUTE_UNUSED,
7494                            asection *section ATTRIBUTE_UNUSED,
7495                            struct bfd_link_info *link_info ATTRIBUTE_UNUSED,
7496                            bfd_boolean *again)
7497 {
7498   if (link_info->relocatable)
7499     (*link_info->callbacks->einfo)
7500       (_("%P%F: --relax and -r may not be used together\n"));
7501
7502   *again = FALSE;
7503   return TRUE;
7504 }
7505
7506 /*
7507 INTERNAL_FUNCTION
7508         bfd_generic_gc_sections
7509
7510 SYNOPSIS
7511         bfd_boolean bfd_generic_gc_sections
7512           (bfd *, struct bfd_link_info *);
7513
7514 DESCRIPTION
7515         Provides default handling for relaxing for back ends which
7516         don't do section gc -- i.e., does nothing.
7517 */
7518
7519 bfd_boolean
7520 bfd_generic_gc_sections (bfd *abfd ATTRIBUTE_UNUSED,
7521                          struct bfd_link_info *info ATTRIBUTE_UNUSED)
7522 {
7523   return TRUE;
7524 }
7525
7526 /*
7527 INTERNAL_FUNCTION
7528         bfd_generic_lookup_section_flags
7529
7530 SYNOPSIS
7531         bfd_boolean bfd_generic_lookup_section_flags
7532           (struct bfd_link_info *, struct flag_info *, asection *);
7533
7534 DESCRIPTION
7535         Provides default handling for section flags lookup
7536         -- i.e., does nothing.
7537         Returns FALSE if the section should be omitted, otherwise TRUE.
7538 */
7539
7540 bfd_boolean
7541 bfd_generic_lookup_section_flags (struct bfd_link_info *info ATTRIBUTE_UNUSED,
7542                                   struct flag_info *flaginfo,
7543                                   asection *section ATTRIBUTE_UNUSED)
7544 {
7545   if (flaginfo != NULL)
7546     {
7547       (*_bfd_error_handler) (_("INPUT_SECTION_FLAGS are not supported.\n"));
7548       return FALSE;
7549     }
7550   return TRUE;
7551 }
7552
7553 /*
7554 INTERNAL_FUNCTION
7555         bfd_generic_merge_sections
7556
7557 SYNOPSIS
7558         bfd_boolean bfd_generic_merge_sections
7559           (bfd *, struct bfd_link_info *);
7560
7561 DESCRIPTION
7562         Provides default handling for SEC_MERGE section merging for back ends
7563         which don't have SEC_MERGE support -- i.e., does nothing.
7564 */
7565
7566 bfd_boolean
7567 bfd_generic_merge_sections (bfd *abfd ATTRIBUTE_UNUSED,
7568                             struct bfd_link_info *link_info ATTRIBUTE_UNUSED)
7569 {
7570   return TRUE;
7571 }
7572
7573 /*
7574 INTERNAL_FUNCTION
7575         bfd_generic_get_relocated_section_contents
7576
7577 SYNOPSIS
7578         bfd_byte *bfd_generic_get_relocated_section_contents
7579           (bfd *abfd,
7580            struct bfd_link_info *link_info,
7581            struct bfd_link_order *link_order,
7582            bfd_byte *data,
7583            bfd_boolean relocatable,
7584            asymbol **symbols);
7585
7586 DESCRIPTION
7587         Provides default handling of relocation effort for back ends
7588         which can't be bothered to do it efficiently.
7589
7590 */
7591
7592 bfd_byte *
7593 bfd_generic_get_relocated_section_contents (bfd *abfd,
7594                                             struct bfd_link_info *link_info,
7595                                             struct bfd_link_order *link_order,
7596                                             bfd_byte *data,
7597                                             bfd_boolean relocatable,
7598                                             asymbol **symbols)
7599 {
7600   bfd *input_bfd = link_order->u.indirect.section->owner;
7601   asection *input_section = link_order->u.indirect.section;
7602   long reloc_size;
7603   arelent **reloc_vector;
7604   long reloc_count;
7605
7606   reloc_size = bfd_get_reloc_upper_bound (input_bfd, input_section);
7607   if (reloc_size < 0)
7608     return NULL;
7609
7610   /* Read in the section.  */
7611   if (!bfd_get_full_section_contents (input_bfd, input_section, &data))
7612     return NULL;
7613
7614   if (reloc_size == 0)
7615     return data;
7616
7617   reloc_vector = (arelent **) bfd_malloc (reloc_size);
7618   if (reloc_vector == NULL)
7619     return NULL;
7620
7621   reloc_count = bfd_canonicalize_reloc (input_bfd,
7622                                         input_section,
7623                                         reloc_vector,
7624                                         symbols);
7625   if (reloc_count < 0)
7626     goto error_return;
7627
7628   if (reloc_count > 0)
7629     {
7630       arelent **parent;
7631       for (parent = reloc_vector; *parent != NULL; parent++)
7632         {
7633           char *error_message = NULL;
7634           asymbol *symbol;
7635           bfd_reloc_status_type r;
7636
7637           symbol = *(*parent)->sym_ptr_ptr;
7638           if (symbol->section && discarded_section (symbol->section))
7639             {
7640               bfd_byte *p;
7641               static reloc_howto_type none_howto
7642                 = HOWTO (0, 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL,
7643                          "unused", FALSE, 0, 0, FALSE);
7644
7645               p = data + (*parent)->address * bfd_octets_per_byte (input_bfd);
7646               _bfd_clear_contents ((*parent)->howto, input_bfd, input_section,
7647                                    p);
7648               (*parent)->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr;
7649               (*parent)->addend = 0;
7650               (*parent)->howto = &none_howto;
7651               r = bfd_reloc_ok;
7652             }
7653           else
7654             r = bfd_perform_relocation (input_bfd,
7655                                         *parent,
7656                                         data,
7657                                         input_section,
7658                                         relocatable ? abfd : NULL,
7659                                         &error_message);
7660
7661           if (relocatable)
7662             {
7663               asection *os = input_section->output_section;
7664
7665               /* A partial link, so keep the relocs.  */
7666               os->orelocation[os->reloc_count] = *parent;
7667               os->reloc_count++;
7668             }
7669
7670           if (r != bfd_reloc_ok)
7671             {
7672               switch (r)
7673                 {
7674                 case bfd_reloc_undefined:
7675                   if (!((*link_info->callbacks->undefined_symbol)
7676                         (link_info, bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
7677                          input_bfd, input_section, (*parent)->address,
7678                          TRUE)))
7679                     goto error_return;
7680                   break;
7681                 case bfd_reloc_dangerous:
7682                   BFD_ASSERT (error_message != NULL);
7683                   if (!((*link_info->callbacks->reloc_dangerous)
7684                         (link_info, error_message, input_bfd, input_section,
7685                          (*parent)->address)))
7686                     goto error_return;
7687                   break;
7688                 case bfd_reloc_overflow:
7689                   if (!((*link_info->callbacks->reloc_overflow)
7690                         (link_info, NULL,
7691                          bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
7692                          (*parent)->howto->name, (*parent)->addend,
7693                          input_bfd, input_section, (*parent)->address)))
7694                     goto error_return;
7695                   break;
7696                 case bfd_reloc_outofrange:
7697                   /* PR ld/13730:
7698                      This error can result when processing some partially
7699                      complete binaries.  Do not abort, but issue an error
7700                      message instead.  */
7701                   link_info->callbacks->einfo
7702                     (_("%X%P: %B(%A): relocation \"%R\" goes out of range\n"),
7703                      abfd, input_section, * parent);
7704                   goto error_return;
7705
7706                 case bfd_reloc_notsupported:
7707                   /* PR ld/17512
7708                      This error can result when processing a corrupt binary.
7709                      Do not abort.  Issue an error message instead.  */
7710                   link_info->callbacks->einfo
7711                     (_("%X%P: %B(%A): relocation \"%R\" is not supported\n"),
7712                      abfd, input_section, * parent);
7713                   goto error_return;
7714
7715                 default:
7716                   /* PR 17512; file: 90c2a92e.
7717                      Report unexpected results, without aborting.  */
7718                   link_info->callbacks->einfo
7719                     (_("%X%P: %B(%A): relocation \"%R\" returns an unrecognized value %x\n"),
7720                      abfd, input_section, * parent, r);
7721                   break;
7722                 }
7723
7724             }
7725         }
7726     }
7727
7728   free (reloc_vector);
7729   return data;
7730
7731 error_return:
7732   free (reloc_vector);
7733   return NULL;
7734 }