7b0d1a0477ed0c08a0f7fda0919ca413aa0f8a3d
[deliverable/binutils-gdb.git] / binutils / ChangeLog
1 2020-05-04 Alan Modra <amodra@gmail.com>
2
3 * readelf.c (process_nds32_specific): Check size of .nds32_e_flags
4 section. Don't assume endian of host matches nds32 target. Free
5 buffer.
6
7 2020-05-01 Alan Modra <amodra@gmail.com>
8 Haim Shimonovich <Haim.Shimonovich@ceva-dsp.com>
9
10 * objdump.c (disassemble_bytes): Don't scan for zeros when
11 disassembling zeros. Translate "resuming at file offset" message.
12 Formatting. Replace some signed variables with unsigned.
13
14 2020-04-30 Alex Coplan <alex.coplan@arm.com>
15
16 * testsuite/binutils-all/aarch64/in-order-all.d: Update to use new
17 disassembly.
18 * testsuite/binutils-all/aarch64/out-of-order-all.d: Likewise.
19
20 2020-04-30 Nick Clifton <nickc@redhat.com>
21
22 * testsuite/lib/binutils-common.exp (check_pie_support): New
23 proc.
24
25 2020-04-29 Andrew Burgess <andrew.burgess@embecosm.com>
26
27 * dwarf.c (display_debug_ranges): Ignore duplicate entries in
28 range_entries for the same offset.
29
30 2020-04-29 Nick Clifton <nickc@redhat.com>
31
32 * readelf.c (warn): New function - like elfcomm.c version but only
33 produces output if warnings are enabled.
34 (struct options): Add --lint and --enable-checks.
35 (usage): Add entry for --lint.
36 (parse_args): Handle -L. If checks are enabled but no dumps have
37 been selected then enable all dumps.
38 (process_section_headers): Replace long if-then-else sequence with
39 a switch. Add warning messages for empty SHT_REL, SHT_RELA and
40 SHT_PROGBITS sections.
41 (process_file): Do not complain if the file is an archive and lint
42 mode has been enabled.
43 * elfcomm.c (error): Make the function weak.
44 (warn): Likewise.
45 * NEWS: Mention the new feature.
46 * doc/binutils.texi: Document the new feature.
47 * dwarf.h (report_leb_status): Add file name and line number
48 parameters. Include them in the diagnostic output.
49 (READ_ULEB): Pass file and line number to report_leb_status.
50 (READ_SLEB): Likewise.
51 * dwarf.c (read_and_print_leb128): Pass file and line number to
52 report_leb_status.
53 * testsuite/binutils-all/readelf.exp: Add test of new feature.
54 * testsuite/binutils-all/zero-sec.s: New test source file.
55 * testsuite/binutils-all/zero-sec.r: Expected output from new
56 test.
57
58 2020-04-29 Nick Clifton <nickc@redhat.com>
59
60 * po/sr.po: Updated Serbian translation.
61
62 2020-04-26 Alan Modra <amodra@gmail.com>
63
64 * readelf.c (get_num_dynamic_syms): Check DT_MIPS_XHASH was
65 read before dereferencing, and gracefully return. Remove
66 gnu_hash_error variable. Free gnu hash arrays if number of
67 syms found is zero.
68
69 2020-04-24 Alan Modra <amodra@gmail.com>
70
71 * readelf.c (get_num_dynamic_syms): Check for nbuckets and nchains
72 non-zero.
73 (process_dynamic_section): Call get_num_dynamic_syms once rather
74 than in segment loop. Break out of segment loop on a successful
75 load of dynamic symbols. Formatting.
76 (process_object): Return error status from process_dynamic_section.
77
78 2020-04-23 Anton Kolesov <anton.kolesov@synopsys.com>
79
80 * elf-bfd.h (elfcore_write_arc_v2): Add prototype.
81 * elf.c (elfcore_grok_arc_v2): New function.
82 (elfcore_grok_note): Call the new function to handle the corresponding
83 note.
84 (elfcore_write_arc_v2): New function.
85 (elfcore_write_register_note): Call the new function to handle the
86 corresponding pseudo-sections.
87
88 2020-04-22 Max Filippov <jcmvbkbc@gmail.com>
89
90 PR ld/25861
91 * readelf.c (is_none_reloc): Recognize
92 BFD_RELOC_XTENSA_PDIFF{8,16,32} and
93 BFD_RELOC_XTENSA_NDIFF{8,16,32}.
94
95 2020-04-22 Nick Clifton <nickc@redhat.com>
96
97 * MAINTAINERS: Remove Chris Faylor as the ix86 PE maintainer.
98
99 2020-04-22 Alan Modra <amodra@gmail.com>
100
101 * readelf.c (archive_file_offset, archive_file_size, dynamic_addr),
102 (dynamic_size, dynamic_nent, dynamic_strings, dynamic_strings_length),
103 (num_dynamic_syms, nbuckets, nchains, buckets, chains),
104 (ngnubuckets, gnubuckets, gnuchains, mipsxlat, ngnuchains),
105 (gnusymidx, dynamic_symbols, dynamic_syminfo, dynamic_syminfo_offset),
106 (dynamic_syminfo_nent, program_interpreter, dynamic_info),
107 (dynamic_info_DT_GNU_HASH, dynamic_info_DT_MIPS_XHASH, version_info),
108 (dynamic_section, symtab_shndx_list, group_count, section_groups),
109 (section_headers_groups): Move to struct filedata. Update use
110 throughout file.
111
112 2020-04-22 Alan Modra <amodra@gmail.com>
113
114 * readelf.c (struct dump_data): New, used..
115 (cmdline): ..here, and..
116 (struct filedata): ..here. Adjust all uses.
117 (request_dump_bynumber, request_dump, parse_args): Pass in a
118 struct dump_data* rather than Filedata*. Adjust callers.
119 (main): Don't set cmdline.file_name.
120
121 2020-04-20 Alan Modra <amodra@gmail.com>
122
123 * readelf.c (process_symbol_table): Clear ngnuchains, ngnubuckets
124 and nbuckets.
125
126 2020-04-20 Alan Modra <amodra@gmail.com>
127
128 * readelf.c (process_section_headers): Free dynamic symbols etc.
129 earlier.
130
131 2020-04-20 Alan Modra <amodra@gmail.com>
132
133 * readelf.c (get_num_dynamic_syms): Formatting. Don't return
134 on error without freeing.
135 (process_dynamic_section): Don't recreate dynamic symbols from
136 dynamic tag info when the dynamic symbols have already been
137 read via section headers.
138
139 2020-04-17 Fredrik Strupe <fredrik@strupe.net>
140
141 * testsuite/binutils-all/arm/vdup-cond.d: New test for testing that
142 conditional VDUP instructions are disassembled correctly.
143 * testsuite/binutils-all/arm/vdup-cond.s: New file used by
144 vdup-cond.d.
145 * testsuite/binutils-all/arm/vdup-thumb.d: New test for testing
146 that VDUP instructions (which are conditional in A32) can be
147 disassembled in thumb mode.
148 * testsuite/binutils-all/arm/vdup-cond.s: New file used by
149 vdup-thumb.d.
150
151 2020-04-17 Alan Modra <amodra@gmail.com>
152
153 PR 25840
154 * debug.c (debug_class_type_samep): Don't segfault on NULL type.
155
156 2020-04-16 Alan Modra <amodra@gmail.com>
157
158 * doc/binutils.texi: Mention --no-show-raw-insn in objdump
159 --no-addresses description.
160
161 2020-04-15 Alan Modra <amodra@gmail.com>
162
163 * objdump.c (no_addresses): New static var.
164 (usage): Print help for --no-addresses.
165 (long_options): Add --no-addresses entry.
166 (objdump_print_addr_with_sym, objdump_print_addr): Omit symbol address.
167 (disassemble_bytes): Don't print current line address, or reloc
168 address.
169 * doc/binutils.texi: Document objdump --no-addresses.
170
171 2020-04-15 Alan Modra <amodra@gmail.com>
172
173 PR 25822
174 * readelf.c (get_num_dynamic_syms): Don't set num_of_syms when
175 reading buckets or chains fails.
176
177 2020-04-15 Alan Modra <amodra@gmail.com>
178
179 * readelf.c (process_symbol_table): Zero gnubuckets, gnuchains
180 etc. after freeing.
181
182 2020-04-15 Alan Modra <amodra@gmail.com>
183
184 * readelf.c (get_group_flags): Translate text.
185 (get_file_type, get_symbol_binding, get_symbol_type),
186 (get_ppc64_symbol_other, get_symbol_other): Increase size of buffer.
187
188 2020-04-15 Alan Modra <amodra@gmail.com>
189
190 PR 25821
191 * readelf.c (get_num_dynamic_syms): Typo fix.
192
193 2020-04-14 Alan Modra <amodra@gmail.com>
194
195 * readelf.c (process_mips_specific): Free eopt and iopt. Avoid
196 possibility of overflow when checking number of conflicts.
197
198 2020-04-14 H.J. Lu <hongjiu.lu@intel.com>
199
200 PR binutils/25707
201 * readelf.c (nbuckets): New.
202 (nchains): Likewise.
203 (buckets): Likewise.
204 (chains): Likewise.
205 (ngnubuckets): Likewise.
206 (gnubuckets): Likewise.
207 (gnuchains): Likewise.
208 (mipsxlat): Likewise.
209 (ngnuchains): Likewise.
210 (gnusymidx): Likewise.
211 (VALID_SYMBOL_NAME): Likewise.
212 (VALID_DYNAMIC_NAME): Use it.
213 (get_dynamic_data): Moved before process_dynamic_section.
214 (get_num_dynamic_syms): New function.
215 (process_dynamic_section): Use DT_SYMTAB, DT_SYMENT, DT_HASH,
216 DT_GNU_HASH and DT_MIPS_XHASH to reconstruct dynamic symbol
217 table. Use DT_STRTAB and DT_STRSZ to reconstruct dynamic string
218 table.
219 (get_symbol_index_type): Don't print "bad section index" when
220 there is no section header.
221 (print_dynamic_symbol): Rewrite.
222 (process_symbol_table): Call print_dynamic_symbol to dump dynamic
223 symbol table.
224
225 2020-04-02 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
226
227 * testsuite/lib/binutils-common.exp (supports_gnu_osabi): Don't
228 enable on *-*-solaris*.
229
230 2020-03-30 Nick Clifton <nickc@redhat.com>
231
232 PR binutils/25662
233 * objcopy.c (copy_object): When copying PE format files set the
234 timestamp field in the pe_data structure if the preserve_dates
235 flag is set.
236 * testsuite/binutils-all/objcopy.exp (objcopy_test) Use
237 --preserve-dates in place of the -p option, in order to make its
238 effect more obvious.
239
240 2020-03-28 Alan Modra <amodra@gmail.com>
241
242 * testsuite/binutils-all/objcopy.exp (objcopy_test): Only
243 clear_xfail hppa*-*-*elf*. Revert mips xfails.
244
245 2020-03-28 Alan Modra <amodra@gmail.com>
246
247 * testsuite/binutils-all/objcopy.exp (objcopy_test): Move xfails
248 from here to calls. Remove "m8*-*-*" entry. Don't xfail tic54x
249 but do xfail spu, mipstx39 and mips-sgi-irix for the executable
250 test. Pass "-p" to objcopy for the executable test.
251
252 2020-03-27 Jozef Lawrynowicz <jozef.l@mittosystems.com>
253
254 PR binutils/25662
255 * testsuite/binutils-all/objcopy.exp (objcopy_test): Add argument to
256 specify whether an object file or executable should be built and tested.
257 Change test names to report whether an object file or executable is
258 being tested.
259 * testsuite/binutils-all/pr25662.ld: New test.
260 * testsuite/binutils-all/pr25662.s: New test.
261
262 2020-03-27 Alan Modra <amodra@gmail.com>
263
264 * readelf.c (process_archive): Don't double free qualified_name.
265 Don't break out of loop with "negative" archive_file_size, just
266 set file offset to max.
267
268 2020-03-25 Alan Modra <amodra@gmail.com>
269
270 * readelf.c (process_archive): Prevent endless loop.
271
272 2020-03-24 H.J. Lu <hongjiu.lu@intel.com>
273
274 PR binutils/25708
275 * nm.c (print_symname): Replace _bfd_elf_get_symbol_version_name
276 with bfd_get_symbol_version_string.
277 (print_symbo): Pass TRUE to bfd_get_symbol_version_string.
278 * objdump.c (objdump_print_symname): Likewise.
279
280 2020-03-24 H.J. Lu <hongjiu.lu@intel.com>
281
282 PR binutils/25708
283 * nm.c (SYM_NAME): Removed.
284 (print_symname): Add a pointer to struct extended_symbol_info
285 argument. Call _bfd_elf_get_symbol_version_name to get symbol
286 version.
287 (print_symdef_entry): Pass NULL to print_symname.
288 (print_symbol_info_bsd): Update call to print_symname.
289 (print_symbol_info_sysv): Likewise.
290 (print_symbol_info_posix): Likewise.
291
292 2020-03-24 Alan Modra <amodra@gmail.com>
293
294 * readelf.c (process_mips_specific): Free iconf on error path.
295
296 2020-03-23 Nick Clifton <nickc@redhat.com>
297
298 PR 25714
299 * wrstabs.c (stab_pop_type): Replace assertion with error return.
300 * write_stabs_in_sections_debugging_info: Likewise.
301 * stab_enum_type: Likewise.
302 * stab_modify_type: Likewise.
303 * stab_struct_field: Likewise.
304 * stab_end_struct_type: Likewise.
305 * stab_start_class_type: Likewise.
306 * stab_class_static_member: Likewise.
307 * stab_class_baseclass: Likewise.
308 * stab_class_start_method: Likewise.
309 * stab_class_method_var: Likewise.
310 * stab_class_end_method: Likewise.
311 * stab_end_class_type: Likewise.
312 * stab_typedef_type: Likewise.
313 * stab_start_function: Likewise.
314 * stab_end_block: Likewise.
315 * stab_lineno: Likewise.
316
317 2020-03-20 Nick Clifton <nickc@redhat.com>
318
319 * readelf.c (get_compression_header): Add ATTRIBUTE_WARN_UNUSED_RESULT.
320 (process_section_headers): Check the return value from
321 get_compression_header.
322 (dump_section_as_strings): Likewise.
323 (dump_section_as_bytes): Likewise.
324 (load_specific_debug_section): Likewise.
325
326 2020-03-20 H.J. Lu <hongjiu.lu@intel.com>
327
328 * ar.c (main): Update bfd_plugin_set_program_name call.
329 * nm.c (main): Likewise.
330
331 2020-03-19 Nick Clifton <nickc@redhat.com>
332
333 PR 25676
334 * testsuite/binutils-all/dw4.s: New test source file.
335 * testsuite/binutils-all/nm.exp: Run the new test.
336
337 2020-03-19 H.J. Lu <hongjiu.lu@intel.com>
338
339 * readelf.c (process_symbol_table): Use unsigned long for si.
340
341 2020-03-19 Alan Modra <amodra@gmail.com>
342
343 * elfcomm.c: Don't include bfd.h or bucomm.h.
344 (program_name): Declare.
345 (process_archive_index_and_symbols): Replace bfd_boolean with int,
346 and substitute FALSE and TRUE.
347 (setup_archive, setup_nested_archive): Likewise.
348 * elfcomm.h: Likewise.
349
350 2020-03-19 Alan Modra <amodra@gmail.com>
351
352 * readelf.c (process_archive): Always return via path freeing
353 memory. Formatting.
354
355 2020-03-19 Alan Modra <amodra@gmail.com>
356
357 * readelf.c (process_netbsd_elf_note): Validate descsz before
358 accessing descdata. Formatting.
359
360 2020-03-19 Alan Modra <amodra@gmail.com>
361
362 * elfcomm.c (setup_archive): Make file_size an off_t. Comment.
363 * elfcomm.h (setup_archive): Update prototype.
364
365 2020-03-16 Alan Modra <amodra@gmail.com>
366
367 * readelf.c (get_symbols): New function.
368 (process_relocs, ia64_process_unwind, hppa_process_unwind),
369 (arm_process_unwind, get_symbol_for_build_attribute): Use it.
370
371 2020-03-16 Alan Modra <amodra@gmail.com>
372
373 * unwind-ia64.c (unw_decode_uleb128): Prevent overlarge shifts.
374 Detect shift overflows and check that terminating byte is found.
375 Print an error on a bad uleb128.
376
377 2020-03-14 Alan Modra <amodra@gmail.com>
378
379 * readelf.c (process_file): Clean ba_cache.
380
381 2020-03-14 Alan Modra <amodra@gmail.com>
382
383 * elfcomm.h (setup_archive): Update prototype.
384 * elfcomm.c (setup_archive): Add file_size parameter and sanity
385 check longnames_size.
386 (setup_nested_archive): Get file size and pass to setup_archive.
387 * elfedit.c (process_archive): Likewise.
388 * readelf.c (process_archive): Pass filedata->file_size to
389 setup_archive.
390
391 2020-03-14 Alan Modra <amodra@gmail.com>
392
393 * readelf.c (dump_section_as_strings): Free memory on error exit.
394 (dump_section_as_bytes, process_notes_at): Likewise.
395 (get_build_id): Free enote.
396
397 2020-03-13 Kamil Rytarowski <n54@gmx.com>
398
399 * readelf.c (get_netbsd_elfcore_note_type): Add support for
400 NT_NETBSDCORE_LWPSTATUS notes.
401
402 2020-03-13 Alan Modra <amodra@gmail.com>
403
404 * elfcomm.c (get_archive_member_name): Always return malloc'd
405 string or NULL.
406 * elfedit.c (process_archive): Tidy memory on all return paths.
407 * readelf.c (process_archive): Likewise.
408 (process_symbol_table): Likewise.
409 (ba_cache): New, replacing ..
410 (get_symbol_for_build_attribute): ..static vars here. Free
411 strtab and symtab before loading new ones. Reject symtab without
412 valid strtab in loop, breaking out of loop on valid symtab.
413 (process_file): Free ba_cache symtab and strtab here, resetting
414 ba_cache.
415
416 2020-03-12 Alan Modra <amodra@gmail.com>
417
418 * readelf.c (process_section_headers): Don't just set
419 filedata->section_headers NULL, free it first. Similarly for
420 dynamic_symbols, dynamic_strings, dynamic_syminfo and
421 symtab_shndx_list. Zero associated counts too.
422 (process_object): Free symtab_shndx_list.
423 (process_file): Free various allocated filedata tables.
424
425 2020-03-11 Nick Clifton <nickc@redhat.com>
426
427 PR 25611
428 PR 25614
429 * dwarf.h (DWARF2_Internal_LineInfo): Add li_address_size and
430 li_segment_size fields.
431 * dwarf.c (read_debug_line_header): Record the address size and
432 segment selector size values (if present) in the lineinfo
433 structure.
434 (display_formatted_table): Warn if the format count is empty but
435 the table itself is not empty.
436 Display the format count and entry count at the start of the table
437 dump.
438 (display_debug_lines_raw): Display the address size and segement
439 selector size fields, if present.
440 * testsuite/binutils-all/dw5.W: Update expected output.
441
442 2020-03-11 Alan Modra <amodra@gmail.com>
443
444 PR 25651
445 * objcopy.c (copy_object): Test "gaps" not gap_fill_set or
446 pad_to_set on second block of code dealing with padding.
447 Replace "c" with "num_sec" and don't recalculate number of
448 sections on second block. Size arrays using sizeof (element)
449 rather than sizeof (element type).
450
451 2020-03-10 Alan Modra <amodra@gmail.com>
452
453 * objdump.c (disassemble_section): Don't call qsort unless
454 sym count is at least two.
455 (disassemble_data): Don't call memcpy with NULL src.
456
457 2020-03-09 Alan Modra <amodra@gmail.com>
458
459 PR 25645
460 * readelf.c (dump_ia64_vms_dynamic_fixups): Pass size and nmemb
461 to get_data rather than multiplying.
462 (dump_ia64_vms_dynamic_relocs): Likewise.
463 (process_version_sections): Correct order of size and nmemb args
464 in get_data call.
465 (process_mips_specific): Likewise.
466
467 2020-03-08 H.J. Lu <hongjiu.lu@intel.com>
468
469 * readelf.c (get_dynamic_data): Replace "memory chekers" with
470 "memory checkers" in comments.
471
472 2020-03-06 Simon Marchi <simon.marchi@efficios.com>
473
474 PR 25491
475 * doc/Makefile.am: Rename MOSTLYCLEANFILES to MAINTAINERCLEANFILES.
476 * doc/Makefile.in: Re-generate.
477
478 2020-03-06 Nick Clifton <nickc@redhat.com>
479
480 * objcopy.c (check_new_section_flags): New function. Reject the
481 SEC_COFF_SHARED flag if the target is not a COFF binary.
482 (copy_object): Call check_new_section_flags.
483 (setup_section): Likewise.
484 * doc/binutils.texi (objcopy): Add a note that the 'share' section
485 flag cannot be applied to ELF binaries.
486
487 2020-03-06 Alan Modra <amodra@gmail.com>
488
489 PR 25637
490 * objcopy.c (filter_symbols): Correct rem_leading_char logic.
491
492 2020-03-05 Alan Modra <amodra@gmail.com>
493
494 PR 25629
495 * objcopy.c (filter_symbols): Don't segfault on NULL
496 prefix_symbols_string.
497
498 2020-03-04 Christian Eggers <ceggers@gmx.de>
499
500 * objcopy.c (copy_object): Convert from bytes to octets for
501 --gap-fill and --pad-to.
502
503 2020-03-03 Nick Clifton <nickc@redhat.com>
504
505 PR 25625
506 * prdbg.c (pr_tag_type): Remove call to abort.
507
508 2020-03-02 Aaron Merey <amerey@redhat.com>
509
510 * binutils/testsuite/binutils-all/debuginfod.exp: Improve port
511 selection.
512
513 2020-03-02 Nick Clifton <nickc@redhat.com>
514
515 PR 25543
516 * readelf.c (dump_section_as_strings): Display new-line characters
517 as \n and then insert a line break.
518 * testsuite/binutils-all/pr25543.s: New test.
519 * testsuite/binutils-all/pr25543.d: Test driver.
520 * testsuite/binutils-all/readelf.exp: Run the new test.
521
522 2020-02-27 Nick Clifton <nickc@redhat.com>
523
524 PR 25526
525 * readelf.c (process_ia64_vms_dynamic_relocs): Check to see if
526 get_data is unable to load the string table.
527
528 2020-02-26 Alan Modra <amodra@gmail.com>
529
530 * elfedit.c: Indent labels correctly.
531 * readelf.c: Likewise.
532 * resres.c: Likewise.
533
534 2020-02-25 H.J. Lu <hongjiu.lu@intel.com>
535
536 PR binutils/25584
537 * ar.c (main): Pass 0 to bfd_plugin_set_program_name.
538 * nm.c (main): Pass 1 to bfd_plugin_set_program_name.
539
540 2020-02-24 Nick Clifton <nickc@redhat.com>
541
542 PR 25499
543 * doc/binutils.texi (objdump): Fix typo in description of
544 objdump's -g option.
545
546 2020-02-20 Nelson Chu <nelson.chu@sifive.com>
547
548 * dwarf.c (regname_internal_riscv): Updated since the DECLARE_CSR
549 is changed.
550
551 2020-02-19 Jordan Rupprecht <rupprecht@google.com>
552
553 * objdump.c (show_line): call bfd_demangle when using do_demangle.
554
555 2020-02-19 Andrew Burgess <andrew.burgess@embecosm.com>
556
557 * configure: Regenerate.
558
559 2020-02-10 Fangrui Song <maskray@google.com>
560
561 * objcopy.c (parse_flags): Handle "exclude".
562 * doc/binutils.texi: Document the support.
563
564 2020-02-10 Aaron Merey <amerey@redhat.com>
565
566 * binutils/testsuite/binutils-all/debuginfod.exp:
567 Replace set ::env with setenv.
568 Start server before setting environment variable.
569 Specify tmpdir as the location of the server's
570 database.
571 Check additional server metrics at start-up.
572
573 2020-02-07 Nick Clifton <nickc@redhat.com>
574
575 * README-how-to-make-a-release: Add note about updating the
576 GAS/NEWS URL in the next release.
577
578 2020-02-07 Sergey Belyashov <sergey.belyashov@gmail.com>
579
580 PR 25469
581 * readelf.c (get_machine_flags): Add support for Z80N machine
582 number.
583
584 2020-02-07 Nick Clifton <nickc@redhat.com>
585
586 * dwarf.c (display_debug_lines_decoded): Force a NUL termination
587 of the truncated file name.
588
589 2020-02-06 Andrew Burgess <andrew.burgess@embecosm.com>
590
591 * objdump.c (print_jump_visualisation): New function.
592 (disassemble_bytes): Call new function.
593
594 2020-02-06 Alan Modra <amodra@gmail.com>
595
596 * testsuite/lib/binutils-common.exp (match_target): Accept '!' before
597 TCL procedure.
598 (supports_gnu_osabi): New procedure.
599 (is_generic): New, from ld-lib.exp.
600 (supports_gnu_unique): Use the above.
601
602 2020-02-04 Alan Modra <amodra@gmail.com>
603
604 * Makefile.am (CFILES): Add od-elf32_avr.c.
605 * Makefile.in: Regenerate.
606 * po/POTFILES.in: Regenerate.
607
608 2020-02-03 Andreas Schwab <schwab@linux-m68k.org>
609
610 * readelf.c (dump_relocations, dump_relocations)
611 (decode_arm_unwind_bytecode, process_dynamic_section)
612 (get_symbol_visibility, get_alpha_symbol_other): Add newline to
613 error message.
614
615 2020-02-03 Sergei Trofimovich <siarheit@google.com>
616
617 * coffdump.c (program_name): Drop redundant definition.
618 * srconv.c (program_name): Likewise
619 * sysdump.c (program_name): Likewise
620
621 2020-02-02 H.J. Lu <hongjiu.lu@intel.com>
622
623 PR gas/25380
624 * objdump.c (sym_ok): Return FALSE if 2 sections are in the
625 same file with different section pointers.
626
627 2020-02-01 Nick Clifton <nickc@redhat.com>
628
629 * README-how-to-make-a-release: Update with more details on the
630 release making process.
631
632 2020-01-31 Nick Clifton <nickc@redhat.com>
633
634 * po/sv.po: Updated Swedish translation.
635
636 2020-01-28 Nick Clifton <nickc@redhat.com>
637
638 * readelf.c (get_build_id): Simplify warning message about corrupt
639 notes encountered whilst scanning for the build-id.
640
641 2020-01-27 Roland McGrath <mcgrathr@google.com>
642
643 * objcopy.c (compare_gnu_build_notes): Fix comparison results
644 for overlapping ranges so that (A == B) == (B == A) holds.
645
646 2020-01-27 Alan Modra <amodra@gmail.com>
647
648 * testsuite/lib/binutils-common.exp (big_or_little_endian): Replace
649 case statement with switch statement.
650
651 2020-01-24 Nick Clifton <nickc@redhat.com>
652
653 * readelf.c (get_build_id): Fix warning messages about corrupt
654 notes.
655
656 2020-01-23 Nick Clifton <nickc@redhat.com>
657
658 * po/fr.po: Updated French translation.
659
660 2020-01-22 Yuri Chornoivan <yurchor@mageia.org>
661
662 PR 25417
663 * readelf.c (get_alpha_symbol_other): Fix error message typo.
664
665 2020-01-20 Nick Clifton <nickc@redhat.com>
666
667 * po/pt.po: Updated Portuguese translation.
668 * po/uk.po: Updated Ukranian translation.
669
670 2020-01-18 Nick Clifton <nickc@redhat.com>
671
672 * README-how-to-make-a-release: Update notes on how to cut a
673 branch for a release.
674
675 2020-01-18 Nick Clifton <nickc@redhat.com>
676
677 * configure: Regenerate.
678 * po/binutils.pot: Regenerate.
679
680 2020-01-18 Nick Clifton <nickc@redhat.com>
681
682 Binutils 2.34 branch created.
683
684 2020-01-17 Thomas Troeger <tstroege@gmx.de>
685
686 * objdump.c (jump_info_visualize_address): Discard jumps that are
687 no longer needed.
688 (disassemble_bytes): Only compute the maximum level if jumps were
689 detected.
690
691 2020-01-13 Nick Clifton <nickc@redhat.com>
692
693 * objdump.c (disassemble_bytes): Remove C99-ism.
694 * testsuite/binutils-all/debuginfod.exp: New tests.
695
696 2020-01-13 Thomas Troeger <tstroege@gmx.de>
697
698 * objdump.c (visualize_jumps, color_output, extended_color_output)
699 (detected_jumps): New variables.
700 (usage): Add the new jump visualization options.
701 (option_values): Add new option value.
702 (long_options): Add the new option.
703 (jump_info_new, jump_info_free): New functions.
704 (jump_info_min_address, jump_info_max_address): Likewise.
705 (jump_info_end_address, jump_info_is_start_address): Likewise.
706 (jump_info_is_end_address, jump_info_size): Likewise.
707 (jump_info_unlink, jump_info_insert): Likewise.
708 (jump_info_add_front, jump_info_move_linked): Likewise.
709 (jump_info_intersect, jump_info_merge): Likewise.
710 (jump_info_sort, jump_info_visualize_address): Likewise.
711 (disassemble_jumps): New function - used to locate jumps.
712 (disassemble_bytes): Add ascii art generation.
713 (disassemble_section): Add scan to locate jumps.
714 (main): Parse the new visualization option.
715 * doc/binutils.texi: Document the new feature.
716 * NEWS: Mention the new feature.
717
718 2020-01-13 Alan Modra <amodra@gmail.com>
719
720 PR 25360
721 PR 25361
722 * dwarf.c (display_debug_frames): Move fde_fc earlier. Free
723 fde_fc col_type and col_offset.
724 * readelf.c (apply_relocations): Move symsec check earlier.
725 (free_debug_section): Free reloc_info.
726 (process_notes_at): Free pnotes on error path.
727 (process_object): Free dump_sects here..
728 (process_archive): ..not here.
729
730 2020-01-13 Alan Modra <amodra@gmail.com>
731
732 PR 25362
733 * nm.c (display_rel_file): Free dyn_syms.
734
735 2020-01-09 Nick Clifton <nickc@redhat.com>
736
737 PR 25220
738 * objcopy.c (empty_name): New variable.
739 (need_sym_before): Prevent an attempt to free a static variable.
740 (filter_symbols): Avoid strcmp test by checking for pointer
741 equality.
742
743 2020-01-09 Nick Clifton <nickc@redhat.com>
744
745 * po/zh_TW.po: Updated Traditional Chinese translation.
746
747 2020-01-09 Aaron Merey <amerey@redhat.com>
748
749 * Makefile.am (readelf_LDADD, objdump_LDADD): Add libdebuginfod.
750 * Makefile.in: Regenerate.
751 * NEWS: Update.
752 * config.in: Regenerate.
753 * configure: Regenerate.
754 * configure.ac: Call AC_DEBUGINFOD.
755 * doc/Makefile.in: Regenerate.
756 * doc/binutils.texi: Add section on using binutils
757 with debuginfod.
758 * dwarf.c (debuginfod_fetch_separate_debug_info): New function.
759 Query debuginfod servers for the target debug file.
760 (load_separate_debug_info): Call
761 debuginfod_fetch_separate_debug_info if configured with
762 debuginfod.
763 (load_separate_debug_files): Add file argument to
764 load_separate_debug_info calls.
765 * dwarf.h (get_build_id): Add declaration.
766 * objdump.c (get_build_id): New function. Get build-id of file.
767 * readelf.c (get_build_id): Likewise.
768 * testsuite/binutils-all/debuginfod.exp: New tests.
769 * testsuite/binutils-all/linkdebug.s: Add .note.gnu.build-id
770 section.
771
772 2020-01-02 Sergey Belyashov <sergey.belyashov@gmail.com>
773
774 * readelf.c: Add support for new Z*) relocations and machine
775 types.
776
777 2020-01-01 Alan Modra <amodra@gmail.com>
778
779 Update year range in copyright notice of all files.
780
781 For older changes see ChangeLog-2019
782 \f
783 Copyright (C) 2020 Free Software Foundation, Inc.
784
785 Copying and distribution of this file, with or without modification,
786 are permitted in any medium without royalty provided the copyright
787 notice and this notice are preserved.
788
789 Local Variables:
790 mode: change-log
791 left-margin: 8
792 fill-column: 74
793 version-control: never
794 End:
This page took 0.065735 seconds and 4 git commands to generate.