1 2019-06-28 Nick Clifton <nickc@redhat.com>
4 * objdump.c (slurp_symtab): Fail with a helpful error message if
5 the symbol table is too large. Skip this check for MMO format
8 2019-06-26 Nick Clifton <nickc@redhat.com>
11 * bucomm.c (bfd_nonfatal): If no bfd error code has been set then
12 indicate this in the output.
13 (bfd_nonfatal_message): Likewise.
15 2019-06-25 Jan Beulich <jbeulich@suse.com>
17 * readelf.c (dump_ctf_indent_lines): Rename local variable
20 2019-06-25 Jan Beulich <jbeulich@suse.com>
22 * objdump.c (dump_ctf_indent_lines): Rename local variable
25 2019-06-14 Alan Modra <amodra@gmail.com>
27 * Makefile.in: Regenerate.
28 * aclocal.m4: Regenerate.
29 * doc/Makefile.in: Regenerate.
31 2019-06-12 Christos Zoulas <christos@zoulas.com>
34 * readelf.c (process_netbsd_elf_note): Add support for
36 (process_note): Add support for PaX notes.
38 2019-06-12 Christos Zoulas <christos@zoulas.com>
41 * readelf.c (get_netbsd_elfcore_note_type): Add support for SH
44 2019-06-12 Christos Zoulas <christos@zoulas.com>
47 * readelf.c (get_netbsd_elfcore_note_type): Add support for NetBSD
50 2019-06-11 Christos Zoulas <christos@zoulas.com>
53 * readelf.c (get_alpha_symbol_other): New function.
54 (get_symbol_other): Use for Alpha symbols.
55 (is_32bit_pcrel_reloc): Add R_VAX_PCREL32.
57 2019-06-11 Christos Zoulas <christos@zoulas.com>
60 * readelf.c (decode_arm_unwind): Ensure that the local variable
61 'addr' is always initialised.
63 2019-06-10 Christos Zoulas <christos@zoulas.com>
66 * strings.c (print_strings): Use %u to print unsigned values in
69 2019-06-10 Christos Zoulas <christos@zoulas.com>
72 * arsup.c (ar_open): Use asprintf in place of xmalloc and
75 2019-06-03 Nick Clifton <nickc@redhat.com>
78 2019-05-29 Nick Clifton <nickc@redhat.com>
80 * configure.ac (LIBCTF): Export. Set to empty for non-ELF based
82 (HAVE_LIBCTF): Define if libctf support is available.
83 * Makefile.am (LIBCTF): Set value to @LIBCTF@.
84 * objdump.c: Make CTF code conditional upon HAVE_LIBCTF being
86 * readelf.c: Likewise.
87 * configure: Regenerate.
88 * Makefile.in: Regenerate.
89 * config.in: Regenerate.
91 2019-05-30 Nick Alcock <nick.alcock@oracle.com>
93 * objdump.c (make_ctfsect): Drop cts_type, cts_flags, and
95 * readelf.c (shdr_to_ctf_sect): Likewise.
97 2019-05-30 Nick Clifton <nickc@redhat.com>
100 * readelf.c (process_version_sections): Add 0x prefix to address
101 display. Correct indentation.
103 2019-05-30 Alan Modra <amodra@gmail.com>
105 * testsuite/lib/binutils-common.exp (supports_gnu_unique): Add
106 s12z to targets not supporting this feature.
108 2019-05-30 Alan Modra <amodra@gmail.com>
110 * testsuite/lib/binutils-common.exp (run_dump_test): Support
111 tcl procedures for xfail args.
113 2019-05-29 Nick Clifton <nickc@redhat.com>
115 * README-how-to-make-a-release: Add libctf to list of directories
116 that need updates in their ChangeLogs.
118 2019-05-29 Nick Clifton <nickc@redhat.com>
120 * configure.ac (LIBCTF): Export. Set to empty for non-ELF based
122 (HAVE_LIBCTF): Define if libctf support is available.
123 * Makefile.am (LIBCTF): Set value to @LIBCTF@.
124 * objdump.c: Make CTF code conditional upon HAVE_LIBCTF being
126 * readelf.c: Likewise.
127 * configure: Regenerate.
128 * Makefile.in: Regenerate.
129 * config.in: Regenerate.
131 2019-05-28 Nick Alcock <nick.alcock@oracle.com>
133 * MAINTAINERS: Add myself as CTF maintainer.
135 2019-05-28 Nick Alcock <nick.alcock@oracle.com>
137 * objdump.c (ctf-api.h): New include.
138 (dump_ctf_section_info): New variable.
139 (dump_ctf_section_name): Likewise.
140 (usage): Describe new options.
141 (enum option_values): Add OPTION_CTF and OPTION_CTF_PARENT.
142 (main): Use them to add --ctf and --ctf-parent.
143 (read_section_stabs): Add new parameter, entsize_ptr.
144 (find_stabs_section): Adjust accordingly.
146 (dump_ctf_indent_lines): New.
147 (dump_ctf_archive_member): New.
149 (dump_bfd): Call it. Free resources afterwards.
150 * readelf.c (ctf-api.h): New include.
152 (static bfd_boolean do_ctf): Likewise.
153 (dump_ctf_parent_name): Likewise.
154 (dump_ctf_symtab_name): Likewise.
155 (dump_ctf_strtab_name): Likewise.
156 (OPTION_CTF_DUMP): Likewise.
157 (OPTION_CTF_PARENT): Likewise.
158 (OPTION_CTF_SYMBOLS): Likewise.
159 (OPTION_CTF_STRINGS): Likewise.
162 (parse_args): Handle the new options, requesting CTF_DUMP.
163 (process_section_contents): Handle CTF_DUMP.
164 (shdr_to_ctf_sect): New.
165 (dump_ctf_indent_lines): New.
166 (dump_section_as_ctf): New.
167 (main): Free resources.
168 * Makefile.am (LIBCTF): New variable.
169 (objdump_DEPENDENCIES): Use it.
170 (readelf_DEPENDENCIES): Likewise.
171 (objdump_LDADD): Likewise.
172 (readelf_LDADD): Likewise.
173 * aclocal.m4: Regenerated.
174 * Makefile.in: Likewise.
176 * doc/binutils.texi (objdump): Document the new options.
178 * doc/ctf.options.texi: New.
179 * doc/Makefile.in: Regenerated.
180 * NEWS: Mention the new feature.
182 2019-05-27 Alan Modra <amodra@gmail.com>
184 * readelf.c (process_section_groups): Continue processing groups
185 when sh_entsize exceeds group size.
187 2019-05-24 Szabolcs Nagy <szabolcs.nagy@arm.com>
189 * readelf.c (get_aarch64_dynamic_type): Handle DT_AARCH64_VARIANT_PCS.
190 (get_aarch64_symbol_other): New, handles STO_AARCH64_VARIANT_PCS.
191 (get_symbol_other): Call get_aarch64_symbol_other.
193 2019-05-24 Alan Modra <amodra@gmail.com>
195 * objdump.c (disassemble_bytes): Set WIDE_OUTPUT in flags.
197 2019-05-23 Jose E. Marchesi <jose.marchesi@oracle.com>
199 * MAINTAINERS: Add myself as the maintainer for BPF.
201 2019-05-23 Jose E. Marchesi <jose.marchesi@oracle.com>
203 * readelf.c: Include elf/bpf.h.
204 (guess_is_rela): Hanle EM_BPF.
205 (dump_relocations): Likewise.
206 (is_32bit_abs_reloc): Likewise.
207 * testsuite/binutils-all/nm.exp: Add bpf-*-* to the list of
210 2019-05-21 Tamar Christina <tamar.christina@arm.com>
212 * dwarf.c (dwarf_regnames_aarch64): Add SVE registers.
213 * testsuite/binutils-all/aarch64/sve-dwarf-registers.d: New test.
214 * testsuite/binutils-all/aarch64/sve-dwarf-registers.s: New test.
216 2019-05-20 Faraz Shahbazker <fshahbazker@wavecomp.com>
219 * testsuite/binutils-all/readelf.ss-mips: Update reference output.
220 * testsuite/binutils-all/readelf.ss-tmips: Likewise.
222 2019-05-20 Nick Clifton <nickc@redhat.com>
224 * po/ca.po: Updated Catalan translation.
226 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
228 * NEWS: Mention Armv8.1-M Mainline and MVE.
230 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
232 * readelf.c (arm_attr_tag_MVE_arch): New array for Tag_MVE_arch values.
233 (arm_attr_public_tag arm_attr_public_tags): Add case for Tag_MVE_arch.
235 2019-05-14 Jamey Hicks <jamey.hicks@gmail.com>
238 * objcopy.c: Add new option --verilog-data-width. Use it to set
239 the value of VerilogDataWidth.
240 * doc/binutils.texi: Document the new option.
241 * testsuite/binutils-all/objcopy.exp: Run tests of new option.
242 * testsuite/binutils-all/verilog-1.hex: New file.
243 * testsuite/binutils-all/verilog-2.hex: New file.
244 * testsuite/binutils-all/verilog-4.hex: New file.
245 * testsuite/binutils-all/verilog-8.hex: New file.
246 * NEWS: Mention the new feature.
248 2019-05-10 Alan Modra <amodra@gmail.com>
250 * testsuite/binutils-all/objdump.exp (test_objdump_disas_limited),
251 (test_objdump_content_limited): Add text arg, use in place of .text.
252 (bintest_signed.o): Call get_standard_section_names for name of
255 2019-05-08 Faraz Shahbazker <fshahbazker@wavecomp.com>
257 * objdump.c (sign_extend_address): New function.
258 (dump_bfd): Sign-extend user-specified start/stop addresses
259 for targets that need it.
260 * testsuite/binutils-all/objdump.exp: Add tests for objdump
261 with start and stop addresses in higher address ranges.
263 2019-05-01 Matthew Malcomson <matthew.malcomson@arm.com>
265 * testsuite/binutils-all/objdump.exp: Correct executable
267 * testsuite/binutils-all/compress.exp: Likewise.
269 2019-05-01 Nick Clifton <nickc@redhat.com>
272 * nm.c: (print_format): New variable.
273 (value_format_32bit, value_format_64bit): Delete.
274 (set_print_radix): Remove code to alter value_format strings.
275 (set_output_format): Record chosen format in print_format.
276 (get_print_format): New function - constructs a printf formatting
277 string according to the requirements of size, radix, and output
279 (print_value): Use get_print_format.
280 * testsuite/binutils-all/nm.exp: Add tests of "nm --format=posix"
283 2019-04-30 Alan Modra <amodra@gmail.com>
285 * wrstabs.c (stab_start_class_type): Add assert to work around
288 2019-04-24 Nick Clifton <nickc@redhat.com>
290 * objcopy.c (strip_main): Do not enable note merging by default if
291 just stripping debug or dwo information.
292 * doc/binutils.texi (strip): Update documentation.
294 2019-04-23 Nick Clifton <nickc@redhat.com>
296 * README-how-to-make-a-release: Add note to update the symbolic
297 link from "docs" to "docs-2.x" on the sourceware website.
299 2019-04-16 Alan Modra <amodra@gmail.com>
301 * testsuite/binutils-all/copy-2.d: Don't run for ns32k-*-*.
302 * testsuite/binutils-all/copy-3.d: Likewise.
304 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
306 * readelf.c (arm_attr_tag_CPU_arch): Add entry for Armv8.1-M Mainline.
308 2019-04-08 H.J. Lu <hongjiu.lu@intel.com>
310 * readelf.c (decode_x86_isa): Handle
311 GNU_PROPERTY_X86_ISA_1_AVX512_BF16.
312 * testsuite/binutils-all/i386/pr21231b.d: Updated.
313 * testsuite/binutils-all/x86-64/pr21231b.d: Likewise.
315 2019-04-08 H.J. Lu <hongjiu.lu@intel.com>
317 * testsuite/binutils-all/nm.exp: Count i386-moss as ELF.
319 2019-03-26 Tamar Christina <tamar.christina@arm.com>
321 * testsuite/binutils-all/aarch64/in-order-all.d: Update.
322 * testsuite/binutils-all/aarch64/in-order.d: Likewise.
323 * testsuite/binutils-all/aarch64/out-of-order-all.d: Likewise.
324 * testsuite/binutils-all/aarch64/out-of-order.d: Likewise.
325 * testsuite/binutils-all/aarch64/out-of-order.s: Likewise.
326 * testsuite/binutils-all/arm/in-order-all.d: Likewise.
327 * testsuite/binutils-all/arm/in-order.d: Likewise.
328 * testsuite/binutils-all/arm/out-of-order-all.d: Likewise.
329 * testsuite/binutils-all/arm/out-of-order.d: Likewise.
330 * testsuite/binutils-all/arm/out-of-order.s: Likewise.
332 2019-03-26 Nick Clifton <nickc@redhat.com>
334 * MAINTAINERS: Take over Dave Brolley's maintainerships for FR30,
337 2019-03-26 Alan Modra <amodra@gmail.com>
339 * objdump.c (dump_relocs_in_section): Warning fix.
341 2019-03-25 Tamar Christina <tamar.christina@arm.com>
343 * testsuite/binutils-all/arm/in-order-all.d: New test.
344 * testsuite/binutils-all/arm/in-order.d: New test.
345 * testsuite/binutils-all/arm/objdump.exp: Support .d tests.
346 * testsuite/binutils-all/arm/out-of-order-all.d: New test.
347 * testsuite/binutils-all/arm/out-of-order.T: New test.
348 * testsuite/binutils-all/arm/out-of-order.d: New test.
349 * testsuite/binutils-all/arm/out-of-order.s: New test.
352 2019-03-25 Tamar Christina <tamar.christina@arm.com>
354 * testsuite/binutils-all/aarch64/in-order-all.d: New test.
355 * testsuite/binutils-all/aarch64/out-of-order-all.d: New test.
356 * testsuite/binutils-all/aarch64/out-of-order.d:
358 2019-03-25 Tamar Christina <tamar.christina@arm.com>
360 * testsuite/binutils-all/aarch64/in-order.d: New test.
361 * testsuite/binutils-all/aarch64/out-of-order.d: Disassemble data as
364 2019-03-25 Tamar Christina <tamar.christina@arm.com>
366 * objdump.c (disassemble_bytes): Pass stop_offset.
367 * testsuite/binutils-all/aarch64/out-of-order.T: New test.
368 * testsuite/binutils-all/aarch64/out-of-order.d: New test.
369 * testsuite/binutils-all/aarch64/out-of-order.s: New test.
371 2019-03-19 Nick Clifton <nickc@redhat.com>
374 * objdump.c (load_specific_debug_section): Check that the amount
375 of memory to be allocated matches the size of the section.
377 2019-03-13 Sudakshina Das <sudi.das@arm.com>
379 * readelf.c (get_aarch64_dynamic_type): Add case for
381 (dynamic_section_aarch64_val): Likewise.
383 2019-03-13 Sudakshina Das <sudi.das@arm.com>
384 Szabolcs Nagy <szabolcs.nagy@arm.com>
386 * readelf.c (get_aarch64_dynamic_type): New.
387 (get_dynamic_type): Use above for EM_AARCH64.
388 (dynamic_section_aarch64_val): New.
389 (process_dynamic_section): Use above for EM_AARCH64.
391 2019-03-13 Sudakshina Das <sudi.das@arm.com>
393 * readelf.c (decode_aarch64_feature_1_and): New.
394 (print_gnu_property_note): Add case for AArch64 gnu notes.
396 2019-03-12 Alan Modra <amodra@gmail.com>
398 * objdump.c (load_specific_debug_section): Don't compare section
399 size against file size.
400 (dump_relocs_in_section): Don't compare reloc size against file size.
401 Print "failed to read relocs" on bfd_get_reloc_upper_bound error.
403 2019-03-05 Nick Clifton <nickc@redhat.com>
406 * doc/binutils.texi (ar cmdline): Fix spelling mistake.
408 2019-03-05 Nick Clifton <nickc@redhat.com>
410 * po/sv.po: Updated Swedish translation.
412 2019-03-05 Matthew Malcomson <matthew.malcomson@arm.com>
415 * testsuite/lib/binutils-common.exp (run_dump_test): Replace a use
416 of "lmap" with a "foreach" loop.
418 2019-03-04 Nick Clifton <nickc@redhat.com>
421 * objcopy.c (copy_archive): Do not copy thin archives.
423 2019-02-27 Matthew Malcomson <matthew.malcomson@arm.com>
425 * testsuite/lib/binutils-common.exp: Allow multiple "as" lines.
427 2019-02-25 Nick Clifton <nickc@redhat.com>
429 * objdump.c (sym_ok): New function.
430 (find_symbol_for_address): Use new function.
431 (disassemble_section): Compare sections by name, not pointer.
432 (dump_dwarf): Move code to initialise byte_get pointer and iterate
433 over separate debug files from here to ...
434 (dump_bfd): ... here. Add parameter indicating that a separate
435 debug info file is being dumped. For main file, pull in the
436 symbol tables from all separate debug info files.
437 (display_object): Update call to dump_bfd.
438 * doc/binutils.texi: Document extened behaviour of the
439 --dwarf=follow-links option.
440 * NEWS: Mention this new feature.
441 * testsuite/binutils-all/objdump.WK2: Update expected output.
442 * testsuite/binutils-all/objdump.exp (test_follow_debuglink): Add
443 options and dump file parameters.
445 * testsuite/binutils-all/objdump.WK3: New file.
446 * testsuite/binutils-all/readelf.exp: Change expected output for
448 * testsuite/binutils-all/readelf.wKis: New file.
450 2019-02-22 Nick Clifton <nickc@redhat.com>
453 * dwarf.h (struct separate_info): New structure for containing
454 information on separate debug info files.
455 * dwarf.c (struct dwo_info): New structure for containing dwo
457 (first_dwo_info): Chain of dwo_info structures.
458 (first_separate_file): Chain of separate_info structures.
459 (separate_debug_file, separate_debug_filename): Delete.
460 (fetch_alt_indirect_string): Scan all separate debug info files
461 for the requested string.
462 (add_dwo_info): New function.
463 (add_dwo_name): New function.
464 (add_dwo_dir): New function.
465 (add_dwo_id: New function.
466 (free_dwo_info): New function.
467 (read_and_display_attr_value): Store DWO data using the new
469 (load_debug_section_with_follow): If necessary, scan the list of
470 separate debug info files for the requested section.
471 (add_separate_debug_file): New function.
472 (load_separate_debug_info): Call add_separate_debug_file to store
473 the information on the newly loaded file.
474 (load_dwo_file): Likewise.
475 (load_separate_debif_file): Rename to load_separate_debug_files.
476 Change return type to boolean. If following links then attempt to
477 load all separate debug info files, not just the first one.
478 (free_debug_memory): Release memory in dwo_info and separate_info
480 * objdump.c (dump_dwarf): Iterate over all loaded debg info files.
481 * readelf.c (process_object): Likewise.
482 * doc/debug.options.texi: Update descriptions of links and
483 follow-links options.
484 * testsuite/binutils-all/objdump.WK2: Update expected output.
485 * testsuite/binutils-all/readelf.k2: Likewise.
486 * NEWS: Announce the new feature.
488 2019-02-21 Nick Clifton <nickc@redhat.com>
491 * unwind-ia64.c: Include sysdep.h.
492 (unw_decode_x1): Check current pointer against end pointer before
494 (unw_decode_x2): Likewise.
495 (unw_decode_x3): Likewise.
496 (unw_decode_x4): Likewise.
497 (unw_decode_r2): Likewise.
498 (unw_decode_p2_p5): Likewise.
499 (unw_decode_p7_p10): Likewise.
500 (unw_decode): Likewise.
502 2019-02-20 Nick Clifton <nickc@redhat.com>
505 * readelf.c (print_stapsdt_note): Harden against corrupt notes.
508 * unwind-ia64.c (unw_decode_uleb128): Add end parameter, use it to
509 prevent walking off the end of the buffer.
510 (unw_decode_x1): Add end paramter, pass it to unw_decode_uleb128.
511 (unw_decode_x2): Likewise.
512 (unw_decode_x3): Likewise.
513 (unw_decode_x4): Likewise.
514 (unw_decode_r2): Pass the end parameter to unw_decode_uleb128.
515 (unw_decode_r3): Likewise.
516 (unw_decode_p7_p10): Likewise.
517 (unw_decode_b2): Likewise.
518 (unw_decode_b3_x4): Likewise.
521 * readelf.c (process_mips_specific): Check for an options section
522 that is too small to even contain a single option.
525 * readelf.c (print_ia64_vms_note): Harden against corrupt notes.
527 2019-02-20 Alan Modra <amodra@gmail.com>
531 * readelf.c (get_data): Avoid possibility of overflow when
532 checking for a read that may extend past end of file.
533 (process_program_headers): Likewise.
535 2019-02-20 Alan Modra <amodra@gmail.com>
538 * objdump.c (dump_bfd_private_header): Print warning if
539 bfd_print_private_bfd_data returns false.
541 2019-02-12 Nick Clifton <nickc@redhat.com>
544 * README-how-to-make-a-release: Use git clean to delete spurious
545 files from the local source repository.
547 2019-02-08 Andrew Burgess <andrew.burgess@embecosm.com>
549 * size.c (berkeley_format): Delete.
550 (enum output_format): New enum.
551 (selected_output_format): New variable.
552 (usage): Update to mention GNU format.
553 (main): Update to extract options, and select format as needed.
554 Handle GNU format where needed.
555 (berkeley_sum): Renamed to...
556 (berkeley_or_gnu_sum): ...this, and updated to handle both formats.
557 (berkeley_format): Renamed to...
558 (berkeley_or_gnu_format): ...this, and updated to handle both
560 (print_sizes): Handle GNU format.
561 * doc/binutils.texi (size): Document new GNU format.
562 * testsuite/binutils-all/size.exp: Add test of extended
564 * NEWS: Mention new functionality.
566 2019-02-08 Andrew Burgess <andrew.burgess@embecosm.com>
568 * doc/binutils.texi (size): Update example output for Berkeley
571 2019-02-07 Nick Clifton <nickc@redhat.com>
573 * README-how-to-make-a-release: Add a note about updating the
574 obsolete targets in the bfd/config.bfd file.
576 2019-02-04 Nick Clifton <nickc@redhat.com>
578 * README-how-to-make-a-release: Add more notes on making a release.
580 2019-01-25 Nick Clifton <nickc@redhat.com>
583 * readelf.c (process_notes_at): Prevent an illegal memory access
584 when the note's namesize is zero.
585 (decode_tic6x_unwind_bytecode): Add code to handle the case where
586 no registers are specified in a frame pop instruction.
588 2019-01-25 Nick Clifton <nickc@redhat.com>
590 * po/bg.po: Updated Bulgarian translation.
592 2019-01-23 Nick Clifton <nickc@redhat.com>
594 * po/fr.po: Updated French translation.
595 * po/pt.po: Updated Portuguese translation.
597 2019-01-21 Nick Clifton <nickc@redhat.com>
599 * po/uk.po: Updated Ukranian translation.
601 2019-01-19 Nick Clifton <nickc@redhat.com>
603 * configure: Regenerate.
604 * binutils/po/binutils.pot.
606 * README-how-to-make-a-release: Update description on how to make
609 2018-06-24 Nick Clifton <nickc@redhat.com>
613 2019-01-17 Nick Clifton <nickc@redhat.com>
615 * objdump.c (disassemble_section): When disassembling from a
616 symbol only stop at the next symbol if the original symbol was not
617 a function symbol. Otherwise continue disassembling until a new
619 * testsuite/binutils-all/objdump.exp: Add tests of extended
621 * testsuite/binutils-all/disasm.s: New test source file.
623 2019-01-16 Kito Cheng <kito@andestech.com>
624 Nelson Chu <nelson@andestech.com>
626 * readelf.c (get_riscv_section_type_name): New function.
627 (get_section_type_name): Add handler for RISC-V.
628 (riscv_attr_tag_t): Declare.
629 (riscv_attr_tag): New.
630 (display_riscv_attribute): New function.
631 (process_attributes): Add handler for RISC-V.
632 * testsuite/binutils-all/strip-3.d: Remove .riscv.attribute
635 2019-01-10 Nick Clifton <nickc@redhat.com>
638 * objdump.c (sanitize_string): New function. Removes control
639 characters from symbol names.
640 (dump_section_header): Use new function.
641 (objdump_print_symname): Likewise.
642 (objdump_print_addr_with_sym): Likewise.
643 (show_line): Likewise.
644 (disassemble_bytes): Likewise.
645 (disassemble_section): Likewise.
646 (load_specific_debug_section): Likewise.
647 (read_section_stabs): Likewise.
648 (print_section_stabs): Likewise.
649 (dump_section): Likewise.
650 (dump_reloc_set): Likewise.
651 (dump_relocs_in_section): Likewise.
652 (dump_bfd): Likewise.
653 (display_any_bfd): Likewise.
655 2019-01-09 Nick Clifton <nickc@redhat.com>
658 * readelf.c (process_archive): Use arch.file_name in error
659 messages until the qualified name is available.
661 2019-01-09 Andrew Paprocki <andrew@ishiboo.com>
663 * configure: Regenerate.
665 2019-01-09 Alan Modra <amodra@gmail.com>
667 * testsuite/binutils-all/cxxfilt.exp: Pass --no-strip-underscores
668 unconditionally to tests needing the option rather than via a
671 2019-01-08 Nick Clifton <nickc@redhat.com>
674 * cxxfilt.c (hp_symbol_characters): Delete.
675 (main): Remove depcreated demangling styles.
676 * stabs.c (parse_stab_argtypes): Remove support for old gnu v2
678 * testsuite/binutils-all/cxxfilt.exp: Use the
679 --no-strip-underscore option for targets that do prefix their
680 symbols with underscores.
681 Update tests to eliminate those that use gnu v2 encoding.
683 2019-01-08 Tamar Christina <tamar.christina@arm.com>
686 * testsuite/binutils-all/copy-6.d: New test.
687 * testsuite/binutils-all/objcopy.exp: Use it.
689 2019-01-08 Alan Modra <amodra@gmail.com>
691 * testsuite/lib/binutils-common.exp (run_dump_test): Don't prepend
692 $srcdir/$subdir to source file name if it starts with "./".
694 2019-01-05 Yoshinori Sato <ysato@users.sourceforge.jp>
696 * readelf.c (get_machine_flags): Add RXv3 output.
698 2019-01-04 Nick Clifton <nickc@redhat.com>
701 * objdump.c (load_specific_debug_section): Check for integer
702 overflow before attempting to allocate contents.
704 2019-01-04 Nick Clifton <nickc@redhat.com>
707 * objcopy.c (copy_object): Free dhandle after writing out the
709 * objdump.c (dump_bfd): Free dhandle after printing out the debug
713 2019-01-01 Alan Modra <amodra@gmail.com>
715 Update year range in copyright notice of all files.
717 For older changes see ChangeLog-2018
719 Copyright (C) 2019 Free Software Foundation, Inc.
721 Copying and distribution of this file, with or without modification,
722 are permitted in any medium without royalty provided the copyright
723 notice and this notice are preserved.
729 version-control: never