1 Fri Jun 9 17:26:11 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3 * objdump.c (wide_output): New flag variable.
4 (usage): Print new -w, --wide options.
5 (long_options): Add --wide support.
6 (dump_section_header): If --wide, don't print a newline between
7 the section's first line and the flags.
8 (objdump_print_address): Use unsigned comparisons for the binary
10 (disassemble_data): If --wide, don't put a \n between the
11 disassembly output and relocation information.
12 (main): Support -w option being the same as --wide.
14 Thu Jun 1 17:09:27 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
16 Sat May 6 08:52:24 1995 H.J. Lu (hjl@nynexst.com)
18 * objcopy.c (smart_rename): make it smarter, clean up
21 Tue May 30 14:24:15 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
23 * Makefile.in: Delete lines with lots of #### because four or more
24 indicate a point for makefile fragment substitution.
26 Tue May 9 17:17:05 1995 Michael Meissner <meissner@tiktok.cygnus.com>
28 * configure.in: Don't build nlmconv on PowerPC eabi any more, it
31 Thu Apr 27 20:21:24 1995 Doug Evans <dje@canuck.cygnus.com>
33 * Makefile.in (EXPECT): Define.
34 (RUNTEST): Use one in source tree if present.
35 (check): Set `rootme' for $(EXPECT).
37 Wed Apr 26 18:26:21 1995 Steve Chamberlain <sac@slash.cygnus.com>
39 * srconv.c (main): Add support for -n option which disables
40 prescan of common symbols.
41 (wr_ob): If reading past the end of a section, fill with zeros.
43 Tue Apr 25 19:14:37 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
45 * objdump.c (dump_section_header): Display load address after
46 virtual memory (run-time) address.
48 Wed Apr 19 09:44:06 1995 Jason Merrill <jason@phydeaux.cygnus.com>
50 * Makefile.in (cplus-dem.o): Pass -DVERSION='"$(VERSION)"' to the
52 (DEMANGLER_PROG): No longer uses version.o.
54 Mon Apr 10 13:29:49 1995 Stan Shebs <shebs@andros.cygnus.com>
56 Merge in support for Mac MPW as a host.
57 (Old change descriptions retained for informational value.)
59 * mpw-config.in (TDEFINES): Define as empty in makefile frag.
61 * mpw-config.in: Create mk.tmp, define ARCHDEFS in it.
63 * mpw-config.in: New file, MPW configure fragment for binutils.
64 * mpw-make.in (install-only): New target.
65 (install): Also depend on install-only.
67 * mpw-make.in (cplusfilt): Renamed from c++filt.
68 (INCLUDES): Add more paths.
70 * mpw-make.in: New file, MPW makefile fragment for binutils.
71 (Normally automatically generated from Makefile.in.)
73 Mon Mar 27 11:52:57 1995 Ian Lance Taylor <ian@cygnus.com>
75 * ar.c (write_archive): Call make_tempname to get output file
76 name, rather than using a fixed name based on the input file.
78 * objcopy.c (make_tempname): Copy from here...
79 * bucomm.c (make_tempname): ...to here, and make global.
80 * bucomm.h (make_tempname): Declare.
82 Fri Mar 24 11:47:42 1995 Ian Lance Taylor <ian@cygnus.com>
84 * strings.c: Include "bfd.h" before other headers. Include
86 * bucomm.c (print_arelt_descr): Cast st_uid and st_gid to long,
87 and print them with %ld.
89 Fri Mar 10 13:09:42 1995 Ian Lance Taylor <ian@cygnus.com>
91 * objcopy.c (strip_options): Add --keep-symbol.
92 (copy_options): Likewise.
93 (copy_usage): Mention --keep-symbol and -K.
94 (strip_usage): Likewise.
95 (keep_symbols): New static variable.
96 (is_strip_symbol): Adjust the return value according to
98 (strip_main): Handle -K. For -N, check that -K was not given.
99 (copy_main): Likewise.
100 * binutils.texi, objcopy.1, strip.1: Document -K.
102 Mon Mar 6 13:33:47 1995 Stan Shebs <shebs@andros.cygnus.com>
104 * objcopy.c (copy_archive): Check result of mkdir.
105 (copy_main): Cast an xmalloc result.
107 * objdump.c (usage): Break long format string into shorter ones.
109 Mon Mar 6 13:46:12 1995 Ian Lance Taylor <ian@cygnus.com>
111 * bucomm.c (list_supported_targets): New function.
112 * bucomm.h (list_supported_targets): Declare.
113 * ar.c (usage): Call list_supported_targets.
114 * nm.c (usage): Likewise.
115 * objcopy.c (copy_usage, strip_usage): Likewise.
116 * objdump.c (usage): Likewise.
117 * size.c (usage): Likewise.
118 * strings.c (usage): Likewise.
120 Tue Feb 28 15:13:58 1995 Ian Lance Taylor <ian@cygnus.com>
122 * bucomm.c (print_arelt_descr): Cast st_size to long before
123 passing it to fprintf.
125 Fri Feb 17 13:36:45 1995 Ian Lance Taylor <ian@cygnus.com>
127 * objcopy.c (struct section_list): Add fields remove, set_flags,
128 and flags. Change adjust from boolean to enum.
129 (remove_sections): Remove static variable.
130 (sections_removed): New static variable.
131 (copy_options): Add --set-section-flags.
132 (copy_usage): Mention --set-section-flags.
133 (parse_flags): New static function.
134 (find_section_list): New static function.
135 (is_strip_symbol): Change return type from int to boolean.
136 (is_strip_section): New static function.
137 (filter_symbols): Call is_strip_section.
138 (copy_object): When adding sections, check for specified flags or
139 VMA. Call filter_symbols if any sections are being removed.
140 (setup_section): Use find_section_list function rather than
141 looking through remove_sections and adjust_sections. Handle
143 (copy_section): Use find_section_list rather than looking through
145 (strip_main): Use find_section_list instead of adding items to
147 (copy_main): Use find_section_list instead of adding items to
148 sections_removed and adjust_sections. Handle --set-section-flags.
149 * binutils.texi, objcopy.1: Document --set-section-flags.
151 Tue Feb 14 18:03:03 1995 Ian Lance Taylor <ian@cygnus.com>
153 * objdump.c (with_source_code): New global variable.
154 (usage): Mention -S/--source.
155 (long_options): Add --source.
156 (prev_functionname, prev_line): New static variables.
157 (struct print_file_list): Define.
158 (print_files): New static variable.
159 (skip_to_line, show_line): New static functions.
160 (disassemble_data): Call show_line to handle -l and -S.
162 * binutils.texi, objdump.1: Document -S/--source.
164 Thu Feb 9 16:11:53 1995 Ian Lance Taylor <ian@cygnus.com>
166 * objcopy.c (copy_usage): Rename parameter to avoid shadowing.
167 (strip_usage): Likewise.
169 * objcopy.c (struct section_add): Define.
170 (add_sections): New static variable.
171 (copy_options): Accept --add-section.
172 (copy_usage): Mention --add-section.
173 (copy_object): Add sections from the add_sections list.
174 (copy_main): Handle --add-section.
175 * binutils.texi, objcopy.1: Document --add-section.
177 Wed Feb 1 15:04:57 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
179 * objdump.c (disassemble_data): Pass section offset, not absolute
180 address, to bfd_find_nearest_line.
182 * nlmconv.c (powerpc_mangle_relocs): Don't use const with
185 Thu Jan 26 18:50:06 1995 Ian Lance Taylor <ian@cygnus.com>
187 * objdump.c (compare_symbols): Use bfd_asymbol_value (VAR) rather
189 (objdump_print_address): Likewise.
190 (disassemble_data): Don't change the symbol values. It can
191 confuse bfd_canonicalize_reloc.
193 Thu Jan 26 12:03:56 1995 Michael Meissner <meissner@tiktok.cygnus.com>
195 * configure.in: Add support for powerpc-*-ebai.
197 Wed Jan 18 10:02:12 1995 Steve Chamberlain <sac@splat>
199 * coffdump.c: Include sysdep.h.
200 (dump_coff_type): Hanlde coff_secdef_type.
201 * coffgrok.c : Include sysdep.h.
202 * srconv.c: Include libiberty.h
203 (absolute_p, dty_start, dty_end, dump_tree_structure): Remove.
205 Wed Jan 18 12:24:14 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
207 * coffdump.c (dump_coff_scope): Cast pointer to unsigned long for
209 * coffgrok.c: Include bucomm.h. Don't declare xmalloc.
210 (push_scope): Declare type of parameter link.
211 * size.c: Include libiberty.h.
212 * srconv.c: Include bucomm.h.
213 (find_base): Declare at top of file.
214 (wr_hd): Add default case to architecture switch.
215 (wr_dps_start): Declare type of parameter nest.
216 (wr_du): Comment out variables used only in commented out blocks.
217 (wr_dus): Remove unused variable i.
218 (wr_sc): Remove unused variables myinfo, low, and high.
219 * strings.c: Include libiberty.h.
220 * sysdump.c: Include <ctype.h>.
222 Tue Dec 20 19:13:44 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
224 * ar.c (main): Ignore 'f' modifier used on HP/UX 9.
226 Thu Dec 15 17:34:12 1994 Stan Shebs <shebs@andros.cygnus.com>
228 * ar.c, nm.c, objcopy.c, objdump.c: Include progress.h.
229 * ar.c, nm.c, objcopy.c, objdump.c (main): Add START_PROGRESS
231 * ar.c (map_over_members, open_inarch): Call PROGRESS.
232 * nm.c (main, display_archive, filter_symbols, print_symbols):
235 * objcopy.c (copy_usage): Break up long usage string.
237 Wed Dec 14 15:51:56 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
239 * objcopy.c (copy_object): Don't bother setting status after
240 nonfatal() "call", because it won't return.
242 Fri Dec 9 00:22:54 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
244 * nlmconv.c (powerpc_mangle_relocs): Don't switch a reloc to use
245 the section symbol if the symbol is undefined.
247 Thu Dec 8 14:45:50 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
249 * objcopy.c (add_strip_symbol): Cast return value of xmalloc.
251 Wed Nov 30 11:05:43 1994 Ian Lance Taylor <ian@rtl.cygnus.com>
253 * ar.c (replace_members): Pass current->filename to normalize when
254 checking for duplicates, because the filename of a newly added
255 file will not have been normalized yet.
257 Thu Nov 17 15:00:13 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
259 * ar.c (main): Don't call do_quick_append if any of the archive
260 names are longer than 14 characters.
262 * objcopy.c (main): Fix is_strip test. From
263 pirker@eiunix.tuwien.ac.at (Martin Pirker).
265 Thu Nov 17 15:37:19 1994 Mark W. Eichin <eichin@cygnus.com>
267 * objcopy.c (add_strip_symbol): New function, adds a name to an
268 explicit list of symbols to strip.
269 (is_strip_symbol): New function, reports whether the name argument
270 is in the explicit list.
271 (filter_symbols): Check against is_strip_symbol above all.
272 (strip_main): Recognize -N option. If used, don't default to
274 (copy_main): Recognize -N option.
275 (strip_usage): Document -N and --strip-symbol options.
277 * objcopy.1, strip.1, binutils.texi: Document -N and
278 --strip-symbol options.
280 Tue Nov 8 13:12:54 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
282 * objdump.c (display_target_list, display_info_table): Pass an
283 array to tmparg, rather than NULL, since some systems can't handle
286 * objcopy.c (copy_archive): Keep a list of the names of the
287 temporary files we created. Close each input BFD after we open
290 Mon Nov 7 15:48:39 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
292 * Makefile.in (VERSION): Bump to 2.5.3.
294 Thu Nov 3 19:04:34 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
296 * Makefile.in (install-info): Install info files from whatever
297 directory they were found in.
299 Patch from DJ Delorie:
300 * configure.bat: do c++filt -> cxxfilt right
302 * sysinfo.y: Include system header files early, so any potential
303 declaration of abort() occurs before its use.
305 * strings.c (strings_file): Try opening the file in binary mode
308 Wed Nov 2 15:44:13 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
310 * ar.c (main): Treat ar qs like ar rs.
312 Tue Oct 25 16:19:25 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
314 * objcopy.c (gap_fill): Explicitly initialize, for clarity.
315 (pad_to_set, pad_to): New static variables.
316 (copy_options): Accept --pad-to.
317 (copy_usage): Mention --pad-to.
318 (copy_object): Support --pad-to.
319 (compare_section_vma): Sort non loadable sections to the front.
320 Sort sections with the same VMA by size.
321 (copy_main): Handle --pad-to.
322 * binutils.texi, objcopy.1: Document --pad-to.
324 Thu Oct 20 13:51:31 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
326 * objcopy.c (gap_fill_set, gap_fill): New static variables.
327 (copy_options): Accept --gap-fill.
328 (copy_usage): Mention --gap-fill.
329 (copy_object): Support --gap-fill.
330 (get_sections, compare_section_vma): New static functions.
331 (copy_main): Handle --gap-fill.
332 * binutils.texi, objcopy.1: Document --gap-fill.
334 Wed Oct 19 14:09:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
336 * Makefile.in (check): Add a dummy else clause to the if
339 * objcopy.c (copy_object): Revert yesterday's change.
340 * binutils.texi, objcopy.1: Remove special mention of --set-start
341 and `binary' output format.
343 Tue Oct 18 11:12:01 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
345 * objcopy.c (copy_object): If the output file format is `binary',
346 and the start address was not set using --set-start, default the
347 start address to zero. This hack is because the `binary' output
348 file format uses the start address to set the virtual address of
349 the first byte in the file.
350 * binutils.texi, objcopy.1: Add some notes on generating S-records
353 * nm.c (print_symdef_entry): Call print_symname to print the
354 symbol name, so that --demangle works.
356 * Makefile.in (mostlyclean): Remove tmpdir.
358 * objcopy.c (struct section_list): Add fields used, adjust, val.
359 (adjust_start, set_start_set, set_start): New static variables.
360 (adjust_section_vma, adjust_sections): New static variables.
361 (copy_options): Add --adjust-start, --adjust-vma,
362 --adjust-section-vma, --adjust-warnings, --no-adjust-warnings,
364 (parse_vma): New static function.
365 (copy_usage): Mention new options.
366 (copy_object): Handle --set-start and --adjust-start.
367 (setup_section): Correct type of last argument to PTR. Set used
368 field if section is removed. Handle --adjust-vma and
369 --adjust-section-vma.
370 (copy_section): Correct type of last argument to PTR.
371 (mark_symbols_used_in_relocations): Likewise.
372 (strip_main): Clear used field when handling -R.
373 (copy_main): Handle new options.
374 * binutils.texi (objcopy): Document new options.
375 * objcopy.1: Document new options.
377 Fri Oct 14 14:38:13 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
379 * configure.in (configdirs): Remove definition--testsuite is no
381 * Makefile.in (testsuite): Remove target.
382 (site.exp): New target.
384 (clean, distclean): Don't recur into testsuite directory.
386 Thu Oct 13 19:24:09 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
388 * Makefile.in (VERSION): Updated to 2.5.
389 * Version 2.5 released.
391 Tue Oct 11 15:26:42 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
393 * Makefile.in (sysdump.o): Depends upon sysroff.c.
395 Mon Oct 10 13:50:30 1994 J.T. Conklin (jtc@rtl.cygnus.com)
397 * nlmconv.c (link_inputs): Pass -Ur flag to ld so that the
398 ctor/dtor tables needed by C++ programs are built.
400 Sun Oct 9 18:04:00 1994 Jim Wilson (wilson@sphagnum.cygnus.com)
402 * Makefile.in (srconv.o): Add dependence on sysroff.c.
404 Tue Oct 4 12:19:51 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
406 * configure.in: Use ${config_shell} when running config.bfd.
408 * Makefile.in (sysroff.h): Split target away from sysroff.c.
409 (srconv.o, sysdump.o): New targets.
410 (srconv, sysdump): Don't depend upon sysroff.c.
412 Wed Sep 28 13:04:34 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
414 * Makefile.in (arparse.c): Don't ignore errors from mv.
415 (sysinfo.c): Likewise. Also, depend upon arparse.c, to prevent a
416 parallel make from trying to build both arparse.c and sysinfo.c
418 (nlmheader.c): Similar change.
419 (arparse.h): Separate target from arparse.c, so that a parallel
420 make does not try to build both at once. Depend upon arparse.c.
421 (sysinfo.h): Similar change.
423 * objdump.c (disassemble_data): Pass the reloc buffer to free, not
424 the pointer used to loop over the relocs.
426 Sat Sep 24 16:16:57 1994 Stan Shebs (shebs@andros.cygnus.com)
428 * objdump.c (disassemble_data): Cast result of xmalloc.
430 Wed Sep 21 19:30:35 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
432 * objdump.c (sorted_syms, sorted_symcount): New global variables.
433 (objdump_print_address): Use sorted_syms and sorted_symcount
434 instead of syms and symcount.
435 (disassemble_data): Don't bother to get the relocs before looping
436 over the sections. Before filtering and sorting the symbol table,
437 copy it into sorted_syms.
439 Fri Sep 16 11:27:39 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
441 * objdump.c (struct objdump_disasm_info): Add field require_sec.
442 (objdump_print_address): If aux->require_sec, require that the
443 symbol be in aux->sec even if HAS_RELOC is not set. If we can't
444 find a smaller symbol in the right section, look for a larger one.
445 (disassemble_data): Set aux.require_sec around the
446 objdump_print_address call for the instruction address.
448 Thu Sep 15 21:43:17 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
450 * ar.c: Call xexit rather than exit.
451 (output_filename, output_file, output_bfd): New static variables.
452 (remove_output): New static function.
453 (main): Call xatexit (remove_output). Call xexit rather than
455 (extract_file): Set output_filename and output_file while output
457 (write_archive): Likewise, but use output_bfd, not output_file.
458 * arsup.c: Include libiberty.h. Call xexit rather than exit.
459 * bucomm.c: Likewise.
461 * objdump.c (disassemble_all): New global variable.
462 (usage): Document --disassemble-all.
463 (long_options): Add disassemble-all as a synonym for -D.
464 (compare_symbols): Make pointers const.
465 (compare_relocs): New static function.
466 (disassemble_data): Rename disassemble to disassemble_fn to avoid
467 shadowing. If dump_reloc_info, print relocs along with
468 disassembly. Skip sections which are not SEC_CODE unless
469 disassemble_all or only is set.
470 (display_bfd): Don't call dump_relocs if disassemble is set.
471 (main): Accept and handle -D.
472 * binutils.texi: Document -D/--disassemble-all.
473 * objdump.1: Likewise.
475 Wed Sep 14 12:19:07 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
477 * objdump.c (disassemble_data): Initialize prevline to 0. Make
478 prev_function non const. Copy functionname into an malloc buffer
479 when setting prev_function, instead of assuming that the string
482 * nm.c: Include libiberty.h.
483 (sort_by_size): New static variable.
484 (long_options): Add --size-sort.
485 (usage): Mention --size-sort.
486 (numeric_forward): Make static. Change from void * to PTR.
487 (numeric_reverse): Likewise.
488 (non_numeric_forward, non_numeric_reverse): Likewise.
489 (sorters): Change declaration from void * to PTR.
490 (size_forward, sort_symbol_by_size): New static functions.
491 (display_rel_file): Handle sort_by_size.
492 (filter_symbols): If sort_by_size, discard absolute and undefined
494 * binutils.texi (nm): Document --size-sort.
495 * nm.1: Document --size-sort.
497 Tue Sep 13 21:06:06 1994 Jeff Law (law@snake.cs.utah.edu)
499 * objcopy.c (copy_main): Initialize input_filename and
500 output_filename to NULL.
502 Tue Sep 13 14:17:24 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
504 * Makefile.in (version.o): Depend upon Makefile, so that version.o
505 gets rebuilt when make variable VERSION is changed.
507 * objdump.c (dump_section_header): Print the SEC_NEVER_LOAD flag.
509 Wed Aug 24 12:40:09 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
511 * configure.in: Change i[34]86 to i[345]86.
513 Tue Aug 23 11:00:40 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
515 * ar.c (ranlib_touch): Don't update the archive map if there isn't
518 Mon Aug 22 16:02:18 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
520 * ar.c: Include libiberty.h.
521 (inarch): Remove variable.
522 (map_over_members): Make static. Add arch argument, and use it
523 instead of inarch. Change all callers.
524 (main): Treat --version as -v. Accept -t argument. Accept any
525 number of archive arguments. Catch and use open_inarch return
526 value, rather than using inarch.
527 (open_inarch): Return newly opened BFD, rather than using inarch.
528 (do_quick_append): Make archive_filename const.
529 (write_archive): Add iarch argument, and use it instead of inarch.
531 (delete_members, move_members, replace_members): Likewise.
532 (ranlib_only): Don't exit on success. Catch and use open_inarch
534 (ranlib_touch): New function.
535 * arsup.h (map_over_members): Don't declare.
536 (ar_end, ar_extract): Declare.
537 (open_inarch): Change return value in declaration to bfd *.
538 * arsup.c (map_over_list): Make static. Always pass two arguments
539 to function. Add arch argument, and use it instead of inarch.
541 (ar_directory_doer): Make static. Add ignored second argument.
543 (ar_directory): Use open_inarch return value rather than inarch.
544 (ar_addlib_doer): Make static.
545 (ar_addlib): Use open_inarch return value rather than inarch.
546 (ar_extract): Remove unused local variable abfd.
548 Thu Aug 11 14:55:57 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
550 Add support for removing named sections to objcopy and strip.
551 * objcopy.c (struct section_list): Define.
552 (remove_sections): New static variable.
553 (strip_options, copy_options): Add remove-section.
554 (copy_usage, strip_usage): Mention -R and --remove-section.
555 (setup_section): If section is in remove_sections list, ignore it.
556 (copy_section): Likewise.
557 (strip_main, copy_main): Handle -R.
558 * binutils.texi, objcopy.1, strip.1: Document new options.
560 Wed Aug 10 10:19:55 1994 Stan Shebs (shebs@andros.cygnus.com)
562 * nlmconv.c (powerpc_mangle_relocs): Rename symvalue to sym_value,
563 so as not to conflict with the symvalue typedef in bfd.h.
565 Mon Aug 1 13:19:09 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
567 * nlmheader.y: Per current NetWare docs, accept a revision number
568 of 0 and treat a revision number greater than 26 as 0.
570 Mon Jul 25 12:58:36 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
572 * objdump.c (objdump_print_address): Correct handling of end of
573 symbols when looking for next symbol with a different value.
575 Fri Jul 22 16:48:34 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
577 * nm.c (numeric_forward): Treat undefined symbols as "less than"
578 defined symbols with zero values. If numeric values are equal, or
579 both symbols are undefined, sort alphabetically. Don't assume
580 that the difference of two bfd_vma values will truncate to "int"
581 and still have the same sign.
582 (numeric_reverse): Call numeric_forward and negate the result.
583 (print_symbol_info_bsd): For undefined symbols, print leading
584 spaces equivalent to the width of a printed bfd_vma, rather than
585 assuming that 8 will look right.
587 Fri Jul 22 10:36:50 1994 Steve Chamberlain (sac@jonny.cygnus.com)
589 * coffgrok.c (doit): Zero all fields of new structure.
590 * srconv.c (sysroff_swap_*_out): Remove redundant trailing arg.
591 * sysinfo.y: Generate sysroff_swap_*_out without requiring extra
594 Fri Jul 22 10:09:53 1994 J.T. Conklin (jtc@phishhead.cygnus.com)
596 * nlmheader.y: Make "stack" and "stacksize" synonyms in the lexer
597 rather than the parser.
599 Thu Jul 21 10:25:09 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
601 * config/mh-alphaosf, config/mh-apollo68v, config/mh-delta88:
604 Sat Jul 16 22:34:39 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
606 * objdump.c (slurp_dynamic_symtab): Try to get the dynamic symbols
607 even if the bfd is not marked DYNAMIC. ELF executables are not
608 marked DYNAMIC, but do have dynamic symbols.
610 Fri Jul 15 01:41:35 1994 Steve Chamberlain (sac@jonny.cygnus.com)
612 * coffgrok.c (do_where): Make data with no type 'int'.
613 (do_define): Keep info on source file of a symbol.
614 * coffgrok.h (coff_symbol): New field.
615 * srconv.c (PROGRAM_VERSION): Now 1.3
616 (wr_rl): Use external ref number for symbol.
617 (wr_dus): Only keep one source file per debug unit.
618 (wr_dln): Always emit line numbers for first source file,
619 (wr_globals): Emit globals in the du of their owning source file.
621 Mon Jul 11 15:59:03 1994 J.T. Conklin (jtc@phishhead.cygnus.com)
623 * nlmheader.y: Null terminate var_hdr->threadName.
625 Fri Jul 8 17:33:22 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
627 * Makefile.in (syslex.o, sysinfo.o): Permit C source files to be
628 in $(srcdir), as they will be for FSF releases.
630 Wed Jul 6 01:13:14 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
632 * nlmconv.c (setup_sections): Preserve existing section flags when
633 copying in flags from a new section.
635 Tue Jul 5 15:56:01 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
637 * objcopy.c: Include libiberty.h.
638 (copy_file): If output_target is NULL, set it to the target of the
641 Wed Jun 29 17:17:14 1994 J.T. Conklin (jtc@phishhead.cygnus.com)
643 * nlmconv.c (link_inputs): Fixed memory allocation bug.
645 Thu Jun 23 12:52:46 1994 David J. Mackenzie (djm@rtl.cygnus.com)
647 * configure.in: Change --with-targets to --enable-targets.
649 Tue Jun 21 12:53:21 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
651 * Makefile.in (sysinfo): Does not depend upon $(ADDL_LIBS).
653 * nlmconv.c (powerpc_build_stubs): Don't generate the PowerPC
654 NetWare custom header; no longer needed.
655 (powerpc_mangle_relocs): Convert relocs against the uninitialized
656 data section into relocs against the data section.
658 * configure.in: Set nlmconv_defs to -DNLMCONV_cputype for all the
659 netware targets. Write it into Makefile as NLMCONV_DEFS.
660 * Makefile.in (nlmconv.o): Pass $(NLMCONV_DEFS) to $(CC).
661 * nlmconv.c: Only compile code for specific CPU types if
662 NLMCONV_cputype is defined.
664 * nlmconv.c (main): Change uses of bfd_abs_section, etc., to use
665 bfd_abs_section_ptr or bfd_is_abs_section, etc.
666 (i386_mangle_relocs, alpha_mangle_relocs): Likewise.
667 (powerpc_build_stubs): Likewise.
668 * nm.c (filter_symbols, print_symbols): Likewise.
669 * objcopy.c (filter_symbols): Likewise.
670 (mark_symbols_used_in_relocations): Likewise.
671 * objdump.c (remove_useless_symbols, dump_relocs): Likewise.
672 * size.c (sysv_internal_printer): Likewise.
674 Mon Jun 20 16:43:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
676 * Makefile.in (MANPAGES): Remove $(DEMANGLER_PROG).
677 (install): Install it explicitly, from build dir, not srcdir.
679 Mon Jun 20 16:29:54 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
681 * objdump.c: Don't include elf/internal.h.
682 (bfd_elf_find_section): Don't declare.
683 (read_section_stabs): No special handling for ELF. Always read
686 Thu Jun 16 17:25:20 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
688 * configure.in: Set UNDERSCORE in Makefile based on result of
689 invoking config.bfd with a second argument of ``_''.
690 * Makefile.in (underscore.c): Depend upon Makefile. Don't try to
691 run $(CC) and $(NM), just use $(UNDERSCORE). Create via temporary
693 (demangle.o): Remove target.
694 ($(NM_PROG)): Don't depend upon demangle.o, and don't link against
695 demangle.o. It's in libiberty anyhow.
696 (cplus-dem.o): Don't depend upon demangle.o.
697 * binutils.texi: Mention -n and --no-strip-underscores arguments
700 Wed Jun 15 12:10:31 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
702 * nm.c (long_options): Add --no-demangle to turn off --demangle,
703 and --no-cplus for Linux compatibility.
704 (usage): Mention --no-demangle.
705 * binutils.texi: Document --no-demangle.
707 Fri Jun 10 15:41:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
709 * nm.c: HOST_64_BIT was renamed to BFD_HOST_64_BIT.
711 * objcopy.c (copy_archive): Make the temporary directory in the
712 same directory as the output BFD, since we may not have write
713 permission on the current directory. Set the permissions of the
714 new directory to 0700, not 0777.
716 Mon Jun 6 21:36:43 1994 D. V. Henkel-Wallace (gumby@cygnus.com)
718 * configure.in: if this is an rs6000 (and we're not building for
719 any other bfd targets) then build only nm (collect needs it on
722 * Makefile.in: define TOOL_PROGS which the list of programes to
723 install in $tooldir -- replaces a hard-coded list.
725 Fri Jun 3 10:59:18 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
727 * objdump.c (display_target_list): Remove unused local ok.
729 Thu May 26 18:05:52 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
731 * config/mh-alphaosf (CFLAGS): Don't specify both -g and -O;
732 they're not compatible under native cc. Use -O1 instead.
734 * Makefile.in (VERSION): Updated to cygnus-2.4.1.
736 Changes from binutils-2.4 net release:
738 * Makefile.in (MANPAGES): Use $(DEMANGLER_PROG).
739 ($(DEMANGLER_PROG).1): Build from cxxfilt.man, using sed.
740 * cxxfilt.man: Renamed from c++filt.1, replaced "c++filt" with
741 magic token to be replaced by sed.
743 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
745 * configure.bat: update for latest makefile.in
747 Fri May 13 23:25:13 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
749 * bucomm.c: Check ANSI_PROTOTYPES rather than __STDC__.
751 Tue May 10 18:22:06 1994 Jason Molenda (crash@sendai.cygnus.com)
753 * objcopy.c (copy_section): Set section size correctly if using
756 Sat May 7 16:49:36 1994 Steve Chamberlain (sac@cygnus.com)
758 * Makefile.in: Add rule for sysinfo.h
760 Fri May 6 12:18:33 1994 Steve Chamberlain (sac@cygnus.com)
762 * Makefile.in (SRCONV_PROG): Define.
763 (PROGS): Use $(SRCONV_PROG) too.
765 Thu May 5 19:41:43 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
767 * Makefile.in (DISTSTUFF): Add sysinfo.c, syslex.c, in case
768 someone configures with `targets=all'.
769 (distclean): Remove y.*.
770 (syslex.o): Depend on sysinfo.h.
771 (sysinfo.c): Rename y.tab.h to sysinfo.h.
772 (install-info): Don't try to install into $(infodir)/$(srcdir).
773 * syslex.l: Include sysinfo.h, not y.tab.h.
775 Thu May 5 11:50:55 1994 Ken Raeburn (raeburn@kr-pc.cygnus.com)
777 * syslex.l (yywrap): Define as function if not defined as a macro.
779 * Makefile.in (objdump.o): Deleted special rule.
780 * configure.in: Don't bother building ARCHDEFS variable for
782 * objdump.c (ARCH_*): Deleted handling.
783 (disassemble_data): Call `disassembler' from opcodes library.
785 Thu May 5 13:28:42 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
787 * Makefile.in (install): Correct handling of $(tooldir) and
788 $(bindir) being on different devices.
790 Fri Apr 29 09:50:38 1994 Steve Chamberlain (sac@cygnus.com)
792 * sysdump.c (h8300, sh): Add declarations.
794 Wed Apr 27 11:25:18 1994 Steve Chamberlain (sac@cygnus.com)
796 * Makefile.in (syslex, sysinfo): Use CC_FOR_BUILD.
797 * coffdump.c, coffgroc.c, coffgrog.h, srconv.c, sysdump.c,
798 sysroff.info: Major changes.
800 Tue Apr 26 18:18:24 1994 Stan Shebs (shebs@andros.cygnus.com)
802 * objdump.c (print_section_stabs): Indicate the stab header symbol
803 more clearly, print numbers of unrecognized stab n_type values.
805 Tue Apr 26 16:22:55 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
807 * nlmconv.c (copy_sections): Copy arelent pointers, not arelents.
809 Mon Apr 25 16:14:32 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
811 * Makefile.in (distclean): Remove $(PROGS) and underscore.c.
813 Fri Apr 22 11:14:19 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
815 * nlmconv.c (setup_sections): Remove special handling of .reginfo
817 (copy_sections): Likewise.
818 (alpha_mangle_relocs): Use bfd_ecoff_get_gp_value rather than the
819 special ECOFF .reginfo section.
821 * objcopy.c (copy_object): Call bfd_copy_private_bfd_data after
822 copying everything else, to let it fiddle with the file in its
825 * objdump.c: Include libiberty.h.
826 (display_target_list): If a format fails, just go on to the next
827 one. Check return value of bfd_set_format.
828 (display_info_table): Likewise. Don't increment loop variable in
829 for loop test, since that skips the first element.
830 (display_target_tables): Rewrite loop for clarity. Ensure that it
831 always prints at least one element.
833 * nlmconv.c (main): Use CyGnUsEx rather than CyGnUsSeCs for
834 sections header. Rename from cygnus_sections to cygnus_ext.
836 Thu Apr 21 12:12:26 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
838 * objdump.c (_DUMMY_NAME_): Don't define.
839 (display_target_list): Use tmpnam to get a file name rather than
840 using _DUMMY_NAME_. Unlink it when done.
841 (display_info_table): Likewise.
843 * nlmconv.c (secsec): New static variable.
844 (main): Create .nlmsections section in output BFD. Store
845 information about it in sections header.
846 (setup_sections): Allocate space in sections header.
847 (copy_sections): Copy zero sized sections. Put information about
848 each section in the sections header.
850 Wed Apr 20 14:34:51 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
852 * nlmconv.c (powerpc_build_stubs): Take new outbfd argument.
853 Change caller. Create custom header for new PowerPC NetWare
856 * Makefile.in (nlmheader.o, nlmconv.o): Update dependencies.
857 * nlmconv.c: Include bfd.h and libiberty.h with "", not <>.
858 * nlmheader.y: Include bfd.h with "", not <>.
860 Wed Apr 13 10:52:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
862 * objdump.c: Do an ifdef on __GO32__, not unix.
864 Wed Apr 6 21:54:49 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
866 Added -D (--dynamic) option to nm and -T (--dynamic-syms) and -R
867 (--dynamic-reloc) arguments to objdump.
868 * nm.c (dynamic): New static variable.
869 (long_options): Added "dynamic".
870 (usage): Mention -D and --dynamic.
871 (main): Add D to getopt string. Handle -D by setting dynamic.
872 (display_rel_file): If dynamic is non-zero, read dynamic symbols
873 rather than normal symbols.
874 * nm.1: Updated for -D (--dynamic) option.
875 * objdump.c (dump_dynamic_symtab): New global variable.
876 (dump_dynamic_reloc_info): New global variable.
877 (dynsyms, dynsymcount): New global variables.
878 (usage): Mention -R, -T, --dynamic-syms and --dynamic-reloc.
879 (long_options): Added "dynamic-reloc" and "dynamic-syms".
880 (slurp_symtab): If no symbols, return rather than exit.
881 (slurp_dynamic_symtab): New function.
882 (display_bfd): Handle dump_dynamic_symtab and
883 dump_dynamic_reloc_info.
884 (dump_symbols): Take new dynamic argument, indicating whether to
885 display dynamic symbols.
886 (dump_relocs): Move most printing into dump_reloc_set.
887 (dump_dynamic_relocs): New function.
888 (dump_reloc_set): New function, extracted from dump_relocs.
889 (main): Add R and T to getopt string. Handle -T by setting
890 dump_dynamic_symtab and -R by setting dump_dynamic_reloc_info.
891 * objdump.1: Updated for -R (--dynamic-reloc) and -T
892 (--dynamic-syms) options.
893 * binutils.texi: Updated for new nm and objdump options.
895 Wed Mar 30 15:52:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
897 Update for recent BFD changes to symbol and reloc reading. Rename
898 all uses of get_symtab_upper_bound to bfd_get_symtab_upper_bound.
900 * coffgrok.c (symcount): Change to long.
901 (do_sections_p1): Check for error return from
902 bfd_get_reloc_upper_bound. Change relcount to long, and check for
903 error from bfd_canonicalize_reloc.
904 (coff_grok): Change storage to long. Check for error from
905 bfd_get_symtab_upper_bound and bfd_canonicalize_symtab.
906 * nlmconv.c (main): Change symcount, newsymalloc, newsymcount, and
907 i to long. Check for error from bfd_get_symtab_upper_bound and
908 bfd_canonicalize_symtab.
909 (copy_sections): Change reloc_size and reloc_count to long. Check
910 for error from bfd_get_reloc_upper_bound and
911 bfd_canonicalize_reloc.
912 (mangle_relocs, i386_mangle_relocs, alpha_mangle_relocs): Change
913 reloc_count_ptr argument to long *. Make corresponding changes to
914 variables loaded from *reloc_count_ptr.
915 * nm.c (display_rel_file): Change storage and symcount to long.
916 Check for errors from bfd_get_symtab_upper_bound and
917 bfd_canonicalize_symtab.
918 * objcopy.c (filter_symbols): Change symcount, src_count and
920 (copy_object): Change symcount to long. Pass another argument to
921 fprintf. Check for errors from bfd_get_symtab_upper_bound and
922 bfd_canonicalize_symtab.
923 (copy_section): Change relcount to long. Check for errors from
924 bfd_get_reloc_upper_bound and bfd_canonicalize_reloc.
925 (mark_symbols_used_in_relocations): Change relcount and i to long.
926 Check for errors form bfd_get_reloc_upper_bound and
927 bfd_canonicalize_reloc.
928 * objdump.c (storage): Remove global variable.
929 (symcount): Changed to long.
930 (slurp_symtab): New local variable storage. Check for errors from
931 bfd_get_symtab_upper_bound and bfd_canonicalize_symtab.
932 (remove_useless_symbols): Change return value and count to long.
933 (objdump_print_address): Change min, max, thisplace and i to long.
934 (disassemble_data): Change i to long.
935 (dump_symbols): Change count to long.
936 (dump_relocs): Change relcount to long. Check for errors from
937 bfd_ret_reloc_upper_bound and bfd_canonicalize_reloc.
938 (display_info_table): Add casts when passing LONGEST_ARCH for
941 Tue Mar 29 14:59:04 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
943 * nm.c (display_archive): Close each archive element after it has
945 * objdump.c (display_file): Likewise.
947 Mon Mar 28 13:04:08 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
949 * configure.in: Change error message to refer to bfd/config.bfd
950 rather than bfd/configure.in.
952 Sun Mar 27 16:23:39 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
954 * More fixes for object formats which allow multiple sections
956 * objcopy.c (setup_section): Make a new output section even if
957 one already exists with the given name.
958 (copy_section): Use isection->output_section rather than trying
959 to look the output section up by its (possibly non-unique) name.
961 * Makefile.in (install-info): Look for binutils.info in the
962 current directory, then in $(srcdir). Don't use $<.
964 Mon Mar 21 12:55:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
966 * objdump.c (objdump_print_address): Make static. Declare with
967 prototype. Change vardiff from int to bfd_signed_vma. Correct
968 binary search termination condition. When looking for same
969 section symbol in relocatable file, handle final symbol correctly.
971 Sun Mar 20 11:26:36 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
973 * Makefile.in: Avoid bug in hpux sed.
975 * objcopy.c: Changes to keep it from stripping symbols used
976 in output relocations.
977 (mark_symbols_used_in_relocations): New function. Mark symbols
978 used in output relocations with BSF_KEEP.
979 (filter_symbols): Do not strip symbols marked with BSF_KEEP.
980 (copy_object): Reorder actions. First setup sections, then
981 build the output symbol table, then copy the section contents.
983 Fri Mar 18 10:53:55 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
985 * ar.c (write_archive): Allocate space for the null byte. From
986 Robert Lipe <robertl@arnet.com>.
988 Thu Mar 17 16:20:28 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
990 * Makefile.in: Built nm.new and strip.new to avoid problems with
991 collect when . is in PATH.
992 (STRIP_PROG): Change from strip to strip.new.
993 (NM_PROG): Change from nm to nm.new.
994 (install): Remove the .new when installing.
996 Wed Mar 16 16:27:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
998 * nlmconv.c (powerpc_build_stubs): Set BSF_DYNAMIC flag for each
999 symbol for which we build a stub.
1000 (powerpc_mangle_relocs): Only reset TOC pointer for a call to a
1001 symbol with BSF_DYNAMIC flag set.
1003 Tue Mar 15 23:04:13 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
1005 * objcopy.c (filter_symbols): Use bfd_is_local_label to determine
1006 if a symbol represents a compiler-generated local label.
1007 (copy_object): Give the BFD backends a chance to copy any private
1008 bfd data from the input BFD to the output BFD.
1009 (setup_section): Give the BFD backends a chance to copy any private
1010 section data from the input section to the output section.
1012 Mon Mar 14 11:15:58 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
1014 * objcopy.c (mangle_section): Delete unused function.
1015 (setup_section): Set osection here instead of calling
1016 mangle section to do it.
1018 Mon Mar 14 12:11:01 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1020 * ar.c (write_archive): Close inarch before unlinking it.
1022 Fri Mar 11 22:20:48 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1024 * nlmconv.c (main): For PowerPC, call powerpc_build_stubs and
1025 powerpc_resolve_stubs. Use __GOT0, not __toc_start. Handle it if
1026 the start and end symbols are not in the text section.
1027 (struct powerpc_stub): New struct definition.
1028 (powerpc_stubs, powerpc_stub_insns): New static variables.
1029 (powerpc_initial_got_size): New static variable.
1030 (powerpc_build_stubs): New function.
1031 (powerpc_resolve_stubs): New function.
1032 (powerpc_mangle_relocs): Clear extraneous data in .got section.
1033 Rearrange reloc handling to handle ELF relocs that are not
1034 partial_inplace. Resolve PC relative relocs.
1036 Wed Mar 9 13:48:11 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1038 * ar.c (move_members): Fix it so that the abi positional modifiers
1039 don't delete all archive members following the insert point.
1041 Tue Mar 8 13:14:43 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1043 * coffgrok.[ch]: New files, understand coff objects.
1044 * coffdump.c: Uses coffgrok to dump out the debug info of a coff
1046 * sysroff.info: Description of a SYSROFF object file.
1047 * sysinfo.y, syslex.l: Parse info file, generate a reader, writer,
1048 header files and a printer.
1049 * srconv.c: Uses coffgrok.c and sysroff.info to convert a coff
1050 file to a SYSROFF file.
1052 Sat Feb 26 13:35:26 1994 Stan Shebs (shebs@andros.cygnus.com)
1054 * ar.c (do_quick_append): Pad with a genuine character 10,
1055 rather than whatever '\n' might happen to be.
1057 Tue Feb 22 18:25:52 1994 Ian Lance Taylor (ian@cygnus.com)
1059 * nlmconv.c (main): Ignore debugging symbols when looking for
1060 special symbols by name.
1062 Sun Feb 20 18:47:42 1994 Ian Lance Taylor (ian@lisa.cygnus.com)
1064 * nlmconv.c: Include libiberty.h.
1066 Support for PowerPC NetWare.
1067 * nlmconv.c (main): For PowerPC NetWare, automatically define the
1068 special symbols __toc_start.
1069 (select_output_format): Handle bfd_arch_powerpc.
1070 (mangle_relocs): Likewise.
1071 (powerpc_mangle_relocs): New function.
1073 Thu Feb 17 09:28:23 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1075 * ar.c, bucomm.c, nlmconv.c, nm.c, objcopy.c, objdump.c,
1076 size.c: Use bfd_get_error and bfd_set_error and new error names.
1078 Fri Feb 11 15:54:51 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1080 * objcopy.c (strip_main, copy_main): Add missing 'break' in switch.
1082 Mon Feb 7 19:45:52 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1084 * objdump.c (disassemble_data): Handle bfd_arch_powerpc.
1086 Sun Feb 6 22:08:20 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1088 * strings.c objdump.c nlmconv.c objcopy.c nm.c ar.c size.c (main):
1089 Call xmalloc_set_program_name.
1091 Fri Feb 4 10:46:01 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1093 * objcopy.c (filter_bytes): Make MEMHUNK a char *, not PTR, so we
1094 can do arithmetic on it.
1096 Thu Feb 3 14:06:41 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1098 * objdump.c (dump_section_stabs, read_section_stabs,
1099 print_section_stabs): Functions broken out of dump_stabs_1.
1100 Free the stabs and strings when done with them.
1102 Wed Feb 2 13:42:23 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1104 * nlmconv.c (main): Use bfd_get_flavour instead of struct member.
1105 * ar.c (print_contents, extract_file), size.c
1106 (print_berkeley_format, print_sysv_format): Use bfd_get_filename and
1107 bfd_my_archive instead of dereferencing the structs directly.
1109 * ar.c: Use bfd_fatal and bfd_nonfatal instead of bfd_perror and exit.
1110 Indent. Remove DEFUNs.
1112 * nlmconv.c (main), objcopy.c (copy_file): Print matching formats
1114 * nm.c (display_file, display_archive), size.c (display_bfd):
1116 Print matching formats if there is an ambiguous match. Use
1117 bfd_nonfatal instead of hardcoded error message if nothing matches.
1119 * arsup.c, ar.c, objdump.c: Use bfd_get_filename instead of
1122 * nm.c (display_archive): New function, from code in display_file.
1123 (display_rel_file): Renamed from do_one_rel_file.
1126 (display_archive): New function from code in display_file.
1127 (display_file): Check bfd_close error return.
1129 * strings.c (strings_object_file): Check bfd_check_format
1132 * strings.c, objdump.c, size.c: Use bfd_nonfatal instead of bfd_perror.
1134 * bucomm.c: Delete references to exit_handler. It wasn't set
1135 anywhere, and now that we're using the libiberty xmalloc, it
1136 wouldn't always get called before exiting.
1137 (list_matching_formats): Function moved from objdump.c.
1138 * bucomm.h: Declare it.
1140 * objdump.c (disassemble_data): Move some variable decls closer to
1141 their use. Add some comments. Replace a nested block with a
1144 Mon Jan 31 18:50:41 1994 Stan Shebs (shebs@andros.cygnus.com)
1146 * objdump.c (display_target_list, display_info_table): Check that
1147 the bfd of the dummy output file is not null.
1149 Wed Jan 26 13:13:18 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1151 * objcopy.c (filter_bytes): New function.
1152 (copy_section): Call it.
1153 (copy_options, copy_usage, copy_main): Add --byte option to
1154 activate it. Appropriate the -b option (which was an undocumented
1155 synonym for -F) for it, also. Add --interleave, -i option for
1157 (setup_section, copy_section, mangle_section): Renamed with no `s'
1159 * objcopy.1, binutils.texi: Document the new options.
1161 * objdump.c (display_target_tables, display_target_list):
1162 New functions broken out of display_info.
1163 Eliminate some magic constants. Use more meaningful variable names.
1164 (dump_bfd_header): New function broken out of display_bfd.
1165 (dump_section_header): New function broken out of dump_headers.
1166 (remove_useless_symbols): Don't shadow global variable name with
1168 (objdump_print_address): Fix backward test.
1170 Tue Jan 25 19:40:54 1994 Stan Shebs (shebs@andros.cygnus.com)
1172 * bucomm.c (print_arelt_descr): Change decl of `when' to time_t.
1173 * objdump.h: Removed.
1175 Mon Jan 24 13:29:02 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1177 * objdump.c (display_file): Remove call to list_matching_formats.
1178 It would never be called.
1179 (list_matching_formats): Take an arg giving the list of matching
1181 (display_bfd): Pass the arg, and get it filled in by calling
1182 bfd_check_format_matches instead of bfd_check_format.
1183 (display_info, display_info_table): target_vector was renamed to
1186 * binutils.texi (objdump): Note some limitations of -h section
1189 Sat Jan 22 16:20:46 1994 Stan Shebs (shebs@andros.cygnus.com)
1191 * Makefile.in (MALLOC): Set to emptiness by default.
1192 (ALL_CFLAGS): Add and use.
1193 (arparse.h): Make it depend on arparse.y.
1194 * ar.c (libbfd.h): Don't require to be in ../bfd.
1195 * objdump.c (comp): Rename to compare_symbols.
1197 Fri Jan 21 20:22:30 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1199 * objdump.c (list_matching_formats): If the file format is ambiguous,
1200 print the matching names so the user can choose one.
1201 (display_bfd): Call it.
1202 (display_file): Call it.
1204 Fri Jan 21 19:17:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1206 * objdump.c (disassemble_data): Support bfd_arch_rs6000.
1208 Mon Jan 17 13:57:25 1994 Stan Shebs (shebs@andros.cygnus.com)
1210 * objdump.c (stab_name): Allocate dynamically.
1211 (stab_print): Use pointers to strings instead of char arrays.
1212 (dump_stabs): Change alloc and init of arrays appropriately.
1213 (dump_stabs_1): Always decide whether to print stab_name or
1214 the stab's type number, if unnamed.
1216 Fri Jan 14 14:42:48 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1218 * objcopy.c (strip_main, copy_main): Don't clobber the input file
1221 * nlmconv.c (main): Warn about an attempt to use a shared library
1222 with uninitialized data.
1224 * nlmconv.c (setup_sections): Make sure that we align the
1225 output_offset of each input section appropriately.
1227 Thu Jan 13 17:32:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1229 * objdump.c (dump_relocs): Don't crash if section name is NULL.
1231 Tue Jan 11 19:46:33 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1233 * filemode.c (filemodestring): Commented out; not used.
1234 (mode_string): Use POSIX definitions.
1235 (ftypelet): Likewise.
1236 (rwx): Removed; no longer used.
1237 * bucomm.c: Include bucomm.h.
1238 (bfd_nonfatal, bfd_fatal): Argument is const.
1239 (fatal): Make __STDC__ version.
1240 * bucomm.h (mode_string): Declare.
1241 * Makefile.in (bucomm.o): Depend upon bucomm.h
1243 Sun Jan 9 12:03:20 1994 Ken Raeburn (raeburn@rtl.cygnus.com)
1245 * bucomm.c (xmalloc, xrealloc): Deleted.
1246 * bucomm.h (xmalloc, xrealloc): Fix prototypes, to correspond to
1247 libiberty version of functions.
1249 Thu Jan 6 06:18:15 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1251 * binutils.texi: Add a chapter summarizing the ways to select
1252 aspects of the target for each program.
1254 * objdump.c (long_options, usage): Add long equivalents for all
1255 remaining short options that lacked them.
1256 * binutils.texi objdump.1: Document them.
1258 * size.c (usage): Tweak usage message.
1259 * size.1: Add missing `=' in examples.
1261 * binutils.texi strip.1 objcopy.1 nlmconv.1 objcopy.c nlmconv.c:
1262 Use "--target=bfdname" as the option to select the BFD target,
1263 like nm and size already do.
1264 Reserve "--format=format" for textual output selection options, but
1265 for now keep old option names as obsolete for backward compatibility.
1267 * strings.c (main, strings_object_file, usage): Add --target option.
1268 * binutils.texi strings.1: Document it.
1270 Sat Jan 1 13:58:24 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1272 * ar.c (main): Add \n in error message.
1274 Thu Dec 23 12:23:11 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1277 * ar.c (main): Put parens around assignment used as truth value.
1278 * objcopy.c (strip_main): Remove unused variables. Return 0.
1279 (copy_main): Remove unused variables. Return 0.
1280 * objdump.c (display_bfd): Declare return value as void.
1281 (stab_print): Use "" instead of 0 to initialize array.
1282 (dump_stabs_1): Print vma using printf_vma.
1283 (display_info): Put parens around assignment used as truth value.
1284 * strings.c (print_strings): Cast printf arguments.
1286 * objcopy.c (copy_main): Use copy_options, not strip_options.
1288 * nlmheader.y (command): Warn about illegal date values.
1290 Wed Dec 15 11:18:03 1993 David J. MacKenzie (djm@frosty.eng.umd.edu)
1292 * bucomm.c bucomm.h: Run through indent. De-ansidecl-ify.
1293 (bfd_nonfatal): New function.
1294 (bfd_fatal): Call it.
1296 * objcopy.c (smart_rename): Do a copy if the dest file has
1297 multiple hard links. Remove source file on successful copy.
1298 Try to preserve mode and owner on successful rename.
1300 * objcopy.c: Run through indent. Clean up a bit.
1301 Make global variables static.
1302 Make {input,output}_{target,filename}, show_version local
1303 to various functions.
1304 New global variable `status' for exit status.
1305 (strip_main, copy_main): New functions with code from main.
1306 (nonfatal): New macro. Use it globally instead of bfd_perror and
1309 (copy_object): Call mangle_sections with bfd_map_over_sections.
1310 (mangle_sections): Adjust for new calling convention.
1312 Fri Dec 10 11:28:11 1993 Ian Lance Taylor (ian@deneb.cygnus.com)
1314 * nlmheader.y (command): Accept MAP and FULLMAP without arguments.
1315 * nlmconv.c (main): Change error message for MAP and FULLMAP.
1317 Thu Dec 9 17:47:19 1993 Ian Lance Taylor (ian@deneb.cygnus.com)
1319 * nlmconv.c (main): Warn about imported symbols that are not in
1320 the IMPORT list even if the IMPORT keyword is not used.
1322 * nlmconv.c (debug, unlink_on_exit): New static variables.
1323 (long_options): Add "debug" and "linker".
1324 (main): Handle -d and -l arguments. Make command line input and
1325 output files optional. Parse the command file before opening the
1326 BFD's, which requires storing more information in local variables.
1327 If INPUT names multiple files, link them together. Use OUTPUT for
1328 the output file name if not named on command line.
1329 (show_usage): Changed for new options.
1330 (link_inputs): New function to automatically invoke linker to
1331 handle multiple INPUT files.
1332 (choose_temp_base_try, choose_temp_base, pexecute): New functions,
1333 mostly copied from gcc/gcc.c.
1334 * nlmconv.h (input_files, output_file): Declare.
1335 * nlmheader.y (input_files, output_file): Define.
1336 (command): Support INPUT with a string_list argument. Support
1338 (string_list): Renamed from module_list.
1339 * Makefile.in (nlmconv.o): Define LD_NAME based on
1340 program_transform_name.
1342 Wed Dec 8 10:09:04 1993 Ian Lance Taylor (ian@deneb.cygnus.com)
1344 * nlmheader.y (nlmheader_identify): New function. Use it to print
1345 the program name just once, instead of with every error message.
1347 Mon Dec 6 16:11:32 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1349 * nlmconv.c (long_options): Changed --header-info to --header-file
1350 to match documentation and usage message.
1352 Sun Dec 5 01:31:01 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
1354 * objdump.c (dump_relocs): Avoid dereferencing a NULL sym_ptr_ptr
1357 Thu Dec 2 16:00:06 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1359 * nlmconv.c (main): Change various types from bfd_size_type to
1360 size_t, since they have to be arguments to fread and fwrite.
1361 Change set from char * to unsigned char *.
1362 (select_output_format): Make mach argument unsigned. Handle
1364 (setup_sections): Don't copy the .reginfo section of an ECOFF
1365 file. Call bfd_set_reloc to initialize the relocation fields.
1366 (copy_sections): Don't copy the .reginfo section of an ECOFF file.
1367 Combine all relocs for a section.
1368 (mangle_relocs): Change type of relocs to permit specific
1369 functions to change it. Call alpha_mangle_relocs for alpha,
1370 default_mangle_relocs for other architectures.
1371 (default_mangle_relocs): New function. Adjust the address of all
1372 relocs by the output_offset.
1373 (i386_mangle_relocs): Change type of relocs argument. Cast length
1374 argument to memmove to size_t.
1375 (alpha_mangle_relocs): New function.
1377 Wed Nov 17 17:38:58 1993 Sean Eric Fagan (sef@cygnus.com)
1379 * nlmconv.c (select_output_format): Use nlm32-sparc for
1382 Wed Nov 17 14:41:35 1993 Jeffrey Osier (jeffrey@thepub.cygnus.com)
1384 * nlmconv.1: added man page
1385 * objcopy.1: fixed format errors
1387 Wed Nov 17 12:03:41 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1389 * Makefile.in: Use CFLAGS as well as LDFLAGS when linking.
1391 Wed Nov 17 04:50:55 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1393 * strings.1: Fix typo.
1395 Mon Nov 15 12:03:20 1993 Ken Raeburn (raeburn@rtl.cygnus.com)
1397 * Makefile.in (DISTSTUFF): Build "info".
1398 (VERSION): Updated to cygnus-2.3.1; 2.3 has gone out.
1400 Sun Nov 14 00:27:24 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
1402 * objdump.c (dump_stabs): Handle stabs-in-som as implemented
1403 by the new BFD SOM assembler.
1405 Sat Nov 13 07:14:05 1993 David J. Mackenzie (djm@rtl.cygnus.com)
1407 * ar.1 c++filt.1 nm.1 objcopy.1 objdump.1 ranlib.1 size.1
1408 strings.1 strip.1: Replace \(em in NAME section with \- so
1409 makewhatis can grok it.
1411 Tue Nov 9 15:22:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1413 * nlmconv.c (i386_mangle_relocs): Adjust reloc address by
1414 section output_offset.
1416 Fri Nov 5 12:11:52 1993 Jeffrey Osier (jeffrey@thepub.cygnus.com)
1418 * binutils.texi: added nlmconv chapter
1420 Wed Nov 3 16:10:50 1993 Jeffrey Wheat (cassidy@cygnus.com)
1422 * Makefile.in: Change RUNTESTFLAGS to RUNTEST_FLAGS
1424 Wed Nov 3 15:09:23 1993 Ken Raeburn (raeburn@rover.cygnus.com)
1426 * Makefile.in (distclean): Don't get rid of dvi or info files.
1428 Tue Nov 2 13:29:59 1993 David J. Mackenzie (djm@rtl.cygnus.com)
1430 * objcopy.c (S_ISLNK): Define as 0 if there's no S_IFLNK.
1432 Fri Oct 29 16:02:34 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1434 * binutils.texi: Move objcopy docs into alphabetical order.
1436 * objdump.c: Use xmalloc instead of malloc.
1438 Fri Oct 29 11:11:14 1993 Stan Shebs (shebs@rtl.cygnus.com)
1440 * objdump.c (info): Rename to formats_info.
1441 (dump_stabs_1): Better comments and formatting.
1443 Thu Oct 28 19:43:16 1993 Stan Shebs (shebs@rtl.cygnus.com)
1445 * ar.c (main): Always create the archive when quick appending,
1446 even if no input files have been given.
1448 Wed Oct 27 12:03:06 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1450 * nlmconv.c (main): Set sharedDebugRecordOffset and
1451 sharedDebugRecordCount fields in extended header.
1453 * nlmconv.c (main): Force moduleName field to upper case.
1455 Mon Oct 25 16:45:42 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1457 * objcopy.c (main): Give a usage message if there are too many
1460 Mon Oct 25 10:37:08 1993 Ken Raeburn (raeburn@rover.cygnus.com)
1462 * Makefile.in (install-info): Rewrite to take advantage of VPATH,
1463 so FSF distributions (with info files in $(srcdir)) install
1465 (DISTSTUFF): Build nlmheader.c too.
1467 Fri Oct 22 11:43:23 1993 Ken Raeburn (raeburn@rover.cygnus.com)
1469 * ar.c (program_name): Don't define here.
1470 * objdump.c: Include "bucomm.h".
1471 (xmalloc): Don't declare here.
1472 (program_name): Don't define here.
1473 (program_version): Fixed type in declaration.
1474 * size.c: Include "bucomm.h".
1475 (program_name): Don't declare here.
1477 Fri Oct 22 14:10:41 1993 Mark Eichin (eichin@cygnus.com)
1479 * objdump.c (fprintf): hide declaration in FPRINTF_ALREADY_DECLARED
1481 Fri Oct 1 12:43:00 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1483 * nlmconv.c (i386_mangle_relocs): Resolve and remove PC relative
1484 relocs against defined symbols in the same section.
1486 Thu Sep 30 16:46:26 1993 Roland H. Pesch (pesch@fowanton.cygnus.com)
1488 * Makefile.in (binutils.dvi): use TEXIDIR to find texinfo.tex
1490 Sat Sep 25 18:09:29 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1492 * objcopy.c (simple_copy, smart_rename): New functions.
1495 Fri Sep 24 15:38:29 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1497 * Makefile.in (clean, distclean): Recurse into testsuite.
1499 Thu Sep 23 01:05:06 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1501 * objcopy.c (setup_sections, copy_sections): If stripping, don't
1502 copy SEC_DEBUGGING sections.
1503 * objdump.c (dump_headers): Print SEC_DEBUGGING flag.
1505 * objdump.c (usage): Mention --stabs.
1507 * objcopy.c (copy_object): Copy all applicable file flags.
1508 (copy_file): Don't copy EXEC_P specially here.
1510 Mon Sep 20 19:28:57 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1512 * nlmconv.c (main): Adjust data section size to correspond to bss
1513 alignment adjustment. Clear BSF_SECTION_SYM if symbol is moved to
1514 a different section. Use time_t for time variable.
1515 (setup_sections): Only put sections with contents in output NLM.
1516 (i386_mangle_relocs): No symbols are common at this point. Add
1517 casts to avoid warnings.
1519 Fri Sep 10 11:00:40 1993 Stan Shebs (shebs@rtl.cygnus.com)
1521 * objdump.c: Made the --stabs option work for stabs-in-coff.
1522 (ELF_STAB_DISPLAY): Removed.
1523 (dump_elf_stabs): Renamed to dump_stabs, changed to run for
1524 any object file format.
1525 (dump_elf_stabs_1): Renamed to dump_stabs_1, added calls to
1526 generic BFD routines for non-ELF case, changed format of message
1527 for no-section-found case.
1528 (display_bfd): Always call dump_stabs if requested.
1529 (dump_data): Call bfd_section_size to get section size.
1531 Fri Sep 10 08:12:23 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1533 * Makefile.in (install): Don't put strings in tooldir/bin.
1535 Mon Sep 6 15:39:04 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1537 * nlmconv.c (total_bss_size): Removed.
1538 (main): Set the bss vma to always follow the data section. Move
1539 symbols into new sections, and adjust values by output_offset.
1540 (setup_sections): Don't copy all sections, but instead point all
1541 text sections to .text, all data sections to .data, and all bss
1543 (copy_sections): Adjust accordingly.
1545 Thu Sep 2 12:34:03 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1547 Only build nlmconv if configured for a NetWare target.
1548 * configure.in: If we have some *-*-netware* target, or are using
1549 all targets, set BUILD_NLMCONV to $(NLMCONV_PROG) in Makefile.
1550 * Makefile.in (PROGS): Use $(BUILD_NLMCONV) rather than
1553 Tue Aug 31 14:13:35 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1555 * objdump.c (ARCH_all): Define ARCH_hppa too.
1556 (dump_headers): Don't test for SEC_BALIGN if it's not defined by
1559 Tue Aug 31 13:29:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1561 * nlmconv.c (main): Force creation of .bss section. Set up the
1562 sections before looking at the symbols. Move all common symbols
1563 into .bss section. Automatically define _edata and _end. Only
1564 export symbols in the export list, with multiple prefixes if
1565 necessary. Warn if no version. Always create extended header.
1566 Set date automatically if not already set.
1567 (setup_sections): Count size of bss sections.
1568 (mangle_relocs, i386_mangle_relocs): Accept section argument, and
1569 take reloc_count as a changeable pointer; changed callers.
1570 (i386_mangle_relocs): Remove PC relative relocs within a section,
1571 as they require no adjustment.
1572 * nlmheader.y: Fixed memory allocation throughout: token STRING is
1573 now allocated on the heap, and freed if not needed. Null
1574 terminated copyright message. Accept version with only two
1576 (symbol_list_opt): New nonterminal, either symbol_list or empty.
1577 (symbol_list): Use left recursion to avoid overflowing parser
1579 (yylex): Rearranged beginning of line check. Accept quoted
1580 strings using single quotes. End generic argument at comment
1581 character or parentheses.
1582 (string_list_append): Fixed.
1583 (string_list_append1): New function.
1585 * bucomm.h: The first argument to xrealloc is PTR, not char *.
1586 * bucomm.c (xrealloc): Use PTR rather than char *.
1587 * Makefile.in (objdump.o): Depend upon config.status to notice
1588 --with-targets changes.
1589 (nlmconv.o): Depend upon bucomm.h.
1591 Tue Aug 17 09:46:01 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1593 * configure.in: Don't pass cpu to config.bfd.
1595 Thu Aug 12 16:43:04 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1597 * Makefile.in ($(NM_PROG)): Depend on demangle.o.
1598 (demangle.o): New target.
1599 (cplus-dem.o): Depend on it, to force compilation order when doing
1602 * nm.c (print_symbol_info_{bsd,sysv,posix}): Take a bfd arg.
1603 (struct output_fns print_symbol_info): Ditto.
1604 (long_options, usage, main): Add -C --demangle option.
1605 (print_symname): New function, demangling if requested.
1606 (print_symbols, print_symbol_info_{bsd,sysv,posix}): Use it.
1608 Wed Aug 11 22:57:23 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1610 * Makefile.in: Put CFLAGS last in compilation rules and omit from
1611 linking rules. Use ARCHDEFS to compile objdump.c.
1612 Update dependencies.
1613 * configure.in: Construct ARCHDEFS based on the BFD target makefile
1615 * objdump.c: Conditionalize calls to the print_insn_ARCH functions
1616 according to ARCHDEFS.
1618 Thu Aug 12 08:06:15 1993 Ian Lance Taylor (ian@cygnus.com)
1620 * ar.c: Removed obsolete and non-functional GNU960 code.
1622 Wed Aug 11 13:08:26 1993 Ian Lance Taylor (ian@cygnus.com)
1624 * size.c (berkeley_sum): New function.
1625 (bsssize, datasize, textsize): New global variables.
1626 (bss_section_name, data_section_name, text_section_name): Removed.
1627 (print_berkeley_format): Map berkeley_sum over all the sections,
1628 rather than only reporting sizes of specifically named sections.
1629 * Makefile.in ($(OBJDUMP_PROG)): Removed dependency on size.o.
1631 Tue Aug 10 10:46:01 1993 Ian Lance Taylor (ian@cygnus.com)
1633 * nlmconv.c, nlmconv.h, nlmheader.y: New files for program to
1634 convert object files into NetWare Loadable Modules.
1635 * Makefile.in (NLMCONV_PROG): New macro, define to be nlmconv.
1636 (PROGS): Add NLMCONV_PROG.
1637 (nlmheader.c, nlmheader.o, nlmconv.o, $(NLMCONV_PROG)): New
1640 Thu Aug 5 15:48:32 1993 david d `zoo' zuhn (zoo@rtl.cygnus.com)
1642 * Makefile.in: define MAKEOVERRIDES to an empty string
1644 Wed Aug 4 17:08:08 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1646 * objcopy.c (copy_file): Make failures to process a file nonfatal.
1648 Mon Aug 2 11:28:23 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1650 * nm.c: Add -B option, like --format=bsd.
1652 Tue Jul 27 16:29:54 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1654 * objcopy.c (copy_file): If the file is neither an object nor an
1655 archive, give an error rather than returning success.
1657 Mon Jul 19 16:13:40 1993 Ken Raeburn (raeburn@rtl.cygnus.com)
1659 * objdump.c (objdump_print_address): Prefer non-local symbols over
1660 local ones, and especially discriminate against debugging symbols.
1661 Also, for relocateable files, try to find a symbol in the current
1662 section, instead of picking one from some random section with a
1663 convenient value (read, section offset).
1664 (disassemble_data): Cast argument to malloc to size_t first.
1665 (dump_data): Likewise.
1666 (dump_relocs): If a single section name is specified, show relocs
1667 only for that section. Otherwise, silently omit sections without
1668 relocs. Format table nicely even if values are printed using 16
1669 digits instead of 8.
1671 Fri Jul 16 15:19:59 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1673 * nm.c: Changes for final version of POSIX.2.
1674 (print_symbol_filename_{bsd,sysv,posix}): New functions.
1675 (formats): Add an element for a pointer to them.
1676 (print_symbols): Call it.
1677 (print_object_filename_posix, print_archive_member_posix): Produce
1678 output according to new POSIX.2 spec.
1680 * strings.c (print_strings): Handle STREAM being NULL.
1681 (strings_a_section): Pass a NULL.
1682 (main): Don't open /dev/null.
1684 Thu Jul 15 12:44:09 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1686 * objdump.c (disassemble_data): Handle the m88k.
1687 (display_bfd): Use bfd_errmsg, rather than just claiming that the
1688 bfd is not an object file.
1690 Mon Jul 12 17:55:34 1993 K. Richard Pixley (rich@cygnus.com)
1692 * Makefile.in (TAGS): make work again by naming directories
1693 explicitly rather than depending on undefined macros.
1694 (INSTALL_XFORM): correct bad install target.
1696 Fri Jul 2 16:58:34 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1698 * strings.c: Doc fixes.
1700 Sun Jun 27 13:35:24 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1702 * Makefile.in: Note dependencies on bucomm.h.
1703 (cplus-dem.o): Link c++filt with version.o.
1705 * strings.c: Include bucomm.h and add prototypes to other decls.
1708 * bucomm.h: Declare xrealloc.
1710 * nm.c, objcopy.c, objdump.c, size.c, strings.c (main, usage): Add
1711 --help option. Put "GNU" in the version message.
1712 (usage): Take stream and exit status as args.
1713 (main): Pass new args to usage.
1715 Fri Jun 25 23:12:12 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1717 * strings.c, strings.1: New files.
1718 * binutils.texi: Document strings.
1719 * Makefile.in: Add rules for it.
1721 Fri Jun 25 20:44:43 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
1723 * objdump.c: Use size-independent bfd elf section names.
1725 Sun Jun 20 23:09:06 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
1727 * objdump.c (objdump_print_address): Handle wide offsets by
1728 calling sprintf_vma.
1730 Fri Jun 18 14:29:12 1993 Per Bothner (bothner@deneb.cygnus.com)
1732 * objdump.c (syms2): Removed unused variable.
1733 * objdump.c (remove_useless_symbols): New function.
1734 * objdump.c (comp): Simplify.
1735 * objdump.c (dis-assemble_data): Make simpler and more
1736 efficient how we filter out useless symbols: Just filter
1737 BEFORE the sort (using remove_useless_symbols).
1738 * objdump.c (objdump_print_address): Simplify.
1739 Change output syntax to match gdb.
1741 Thu Jun 17 16:53:56 1993 david d `zoo' zuhn (zoo@cygnus.com)
1743 * Makefile.in: canonicalize install.sh; for use within
1744 this directory (and subdirs)
1746 Mon Jun 14 12:13:22 1993 david d `zoo' zuhn (zoo at rtl.cygnus.com)
1748 * Makefile.in (install, install-info): remove parentdir support,
1749 use INSTALL_XFORM; define INSTALL_XFORM
1751 Thu Jun 10 17:29:21 1993 Per Bothner (bothner@cygnus.com)
1753 * objcopy.c (copy_object): Fix bad size passed to xmalloc().
1755 Mon Jun 7 12:41:12 1993 Per Bothner (bothner@rtl.cygnus.com)
1757 * Makefile.in (INCLUDES): Add -I../bfd for sysdep.h and bfd.h.
1758 * configure.in: No longer need to configure to get sysdep.h.
1759 * objcopy.c (copy_object): Fix symbol table handling.
1761 Fri Jun 4 17:20:03 1993 Per Bothner (bothner@cygnus.com)
1763 * objcopy.c (filter_symbols): Cannot filter the symbols
1764 in place, because that confuses the relocs, so take separate
1765 parameter for output array.
1766 * objcopy.c (sympp): Make two variables: isympp and osympp.
1767 * objcopy.c (copy_object): Allocate separate array (osympp)
1768 for filtered symbols.
1770 Fri Jun 4 10:51:44 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1772 * Makefile.in: change recursion test to presence of a configured
1775 Thu Jun 3 14:05:57 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1777 * Makefile.in (underscore.c): Hack the backquoted command so it
1778 doesn't cause Solaris make to bomb.
1780 Thu Jun 3 10:40:19 1993 Jeffrey Osier (jeffrey@cygnus.com)
1782 * Makefile.in: added c++filt and objcopy to MANPAGES variable
1783 * .Sanitize: keep c++filt.1 and objcopy.1
1785 Thu Jun 3 00:32:52 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1787 * Makefile.in: rename LOADLIBES to EXTRALIBS
1789 Wed Jun 2 18:30:24 1993 Jeffrey Osier (jeffrey@cygnus.com)
1791 * c++filt.1, objcopy.1: new man pages
1793 Fri May 28 15:01:24 1993 Per Bothner (bothner@rtl.cygnus.com)
1795 * Makefile.in (install): Also install ar and ranlib in
1796 $(tooldir)/bin; needed for building libgcc.a.
1797 * objdump.c (objdump_print_address): Fix the check
1798 "coincidental" label matches by dis-allowing undefined
1801 Thu May 27 16:58:31 1993 Jeffrey Osier (jeffrey@cygnus.com)
1803 * biutils.texi: revised c++filt chapter
1805 Wed May 26 17:24:17 1993 Ian Lance Taylor (ian@cygnus.com)
1807 * Makefile.in (FLAGS_TO_PASS): Pass down CC and CFLAGS.
1809 Tue May 25 00:26:47 1993 Ken Raeburn (raeburn@cygnus.com)
1811 * objdump.c (slurp_symtab): Print warning for bad symbol table.
1812 (bfd_elf32_find_section, Elf32_Internal_Shdr): Updated
1813 declarations and uses.
1815 * Makefile.in (DISTSTUFF): Don't build binutils.mm.
1817 Fri May 21 10:51:19 1993 David J. Mackenzie (djm@rtl.cygnus.com)
1819 * nm.c: Add -f/--format, -P/--portability, -t/--radix options.
1820 Make global variables static.
1821 (main): Make -v like -n, not -V, and make -A like -o, for POSIX.2.
1822 (set_print_radix, set_output_format,
1823 print_{object_filename,archive_filename,archive_member,symbol_info}
1824 {bsd,sysv,posix}): New functions.
1825 (display_file, print_symbols): Call them.
1827 * ar.c: Improve error messages.
1829 * nm.c (main): Handle long options that just set a flag.
1831 * nm.c (main), ar.c (do_show_version), objcopy.c (main), size.c
1832 (main): Exit after printing the version number, per the GNU coding
1835 Mon May 17 13:20:25 1993 Per Bothner (bothner@cygnus.com)
1837 * README, Makefile.in: Minor updates for 2.2.
1839 Fri May 14 11:12:26 1993 Per Bothner (bothner@cygnus.com)
1841 * Makefile.in (underscore.c): Automatically generate
1842 (using nm) a file with the variable prepends_underscore.
1843 * Makefile.in (c++filt): Link underscore.o with cplus-dem.o
1844 so that initial underscores get removed iff appropriate.
1845 * binutils.texi: Preliminary documentation for c++filt.
1846 * Makefile.in, binutils.texi: Set to version 2.2.
1848 * NEWS: Mention copy->objcopy renaming and new c++filt program.
1850 Wed May 12 12:05:36 1993 Ian Lance Taylor (ian@cygnus.com)
1852 * Makefile.in (cplus-dem.o, $(DEMANGLER_PROG)): Build the
1853 demangler via cplus-dem.o, rather than directly from the .c file.
1855 * objcopy.c: Renamed from copy.c, updated comments accordingly.
1856 * Makefile.in, binutils.texi: Renamed copy to objcopy.
1857 * is-strip.c, maybe-strip.c, not-strip.c: Updated comments for
1858 rename of copy to objcopy.
1860 Mon May 10 17:20:18 1993 Per Bothner (bothner@cygnus.com)
1862 * binutils.texi (strip, -v option): Fix typo.
1864 Fri May 7 13:57:50 1993 Ian Lance Taylor (ian@cygnus.com)
1866 * Makefile.in (RUNTEST): Define.
1867 (FLAGS_TO_PASS): Pass down RUNTEST.
1869 Tue May 4 10:06:50 1993 Ian Lance Taylor (ian@cygnus.com)
1871 * Makefile.in (DEMANGLER_PROG): Name it c++filt.
1872 (PROG): Also build and install COPY_PROG.
1874 Mon May 3 19:11:48 1993 Per Bothner (bothner@cygnus.com)
1876 * Makefile.in: Change definition of $(tooldir) to match FSF.
1878 Wed Apr 28 23:41:32 1993 David J. Mackenzie (djm@rtl.cygnus.com)
1880 * size.c (usage): Add missing options.
1881 (main): Clean up option parser.
1883 * objdump.c (usage): Add missing options.
1884 (display_file): Print program name before calling
1887 * nm.c (usage): Add missing options.
1888 (main): Clean up option parser.
1889 (display_file): Print program name before calling
1892 * copy.c (copy_usage, strip_usage): Add missing options.
1894 * ar.c (usage): New function.
1896 (open_inarch, do_quick_append): Print program name before calling
1899 Thu Apr 22 15:01:35 1993 Ian Lance Taylor (ian@cygnus.com)
1901 * nm.c (main): Accept and ignore -A and -B for MIPS compatibility.
1903 Mon Apr 19 14:06:59 1993 Rob Savoye (rob@cygnus.com)
1905 * Makefile.in: Added FLAGS_TO_PASS so tests get run on freshly
1906 built binaries if they exist. (otherwise the path)
1908 Wed Apr 7 22:22:50 1993 Rob Savoye (rob@cygnus.com)
1910 * Makefile.in: Changed check target to use DejaGnu.
1912 Thu Apr 1 12:37:13 1993 Jim Kingdon (kingdon@cygnus.com)
1914 * Makefile.in: Remove am29k-pinsn.c, i960-pinsn.c.
1915 objdump.c: a29k and i960 are `disassemble' not `print'.
1917 * objdump.c: Rename print_address to objdump_print_address
1918 and change parameters.
1919 (disassemble_data): Use objdump_print_address.
1921 Wed Mar 31 10:25:29 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1923 * objdump.c (disassemble_data): print_insn_sparc is now a
1924 `disassemble' not a `print'.
1925 Makefile.in: Remove sparc-pinsn.c (now in libopcodes.a).
1927 * objdump.c (disassemble_data): Use new read_memory_func stuff.
1929 Thu Mar 25 10:38:11 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1931 * objdump.c (fprintf): Declaration of variadic function had better
1932 be a prototype for ANSI C systems.
1934 Mon Mar 22 23:19:46 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1936 * Makefile.in: rename test-install to install-check
1938 Fri Mar 19 14:40:08 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1940 * objdump.c (disassemble_data): Add H8500.
1942 Fri Mar 19 10:56:51 1993 Jim Kingdon (kingdon@cygnus.com)
1944 * objdump.c (usage): Mention long options.
1946 Thu Mar 18 14:22:17 1993 Per Bothner (bothner@rtl.cygnus.com)
1948 * nm.c: Modify behavior of -o flag for archives to match
1949 BSD4.4 and Sunos 4: Prefix archive name before each line.
1951 * m68k-pinsn.c: Removed. Subsumed by ../opcodes/m68k-dis.c.
1952 * i386-pinsn.c: Removed. Subsumed by ../opcodes/i386-dis.c.
1953 * Makefile.in: Adjust accordingly.
1954 * objdump.c: Support new-style disassemblers (ones that use
1955 the interface of ../include/dis-asm.h).
1957 Thu Feb 25 15:57:00 1993 Per Bothner (bothner@rtl.cygnus.com)
1959 * Makefile.in: When making tar file, remove texinfo/*,
1960 except for texinfo/texinfo.tex.
1961 * ardup.c: Add extern declaration of strdup.
1962 * Makefile.in (testsuite): Add 'else true' since otherwise
1963 Ultrix /bin/sh complains.
1965 Wed Feb 24 19:44:18 1993 Per Bothner (bothner@rtl.cygnus.com)
1967 * Makefile.in: Set VERSION to 2.1.
1968 * README, NEWS: Updates.
1969 * nm.c: Add -v as a synonym for -V.
1971 Tue Feb 23 19:00:50 1993 Mike Werner (mtw@poseidon.cygnus.com)
1973 * configure.in: added testsuite to configdirs.
1974 * Makefile.in: added support for building testsuite.
1976 Mon Feb 22 22:52:10 1993 Per Bothner (bothner@rtl.cygnus.com)
1978 * objdump.c (disassemble_data): Print function names when
1979 given by bfd_find_nearest_line. If not - still print
1982 Mon Feb 22 07:54:03 1993 Mike Werner (mtw@poseidon.cygnus.com)
1984 * binutils/testsuite: made modifications to testcases, etc., to allow
1985 them to work properly given the reorganization of deja-gnu and the
1986 relocation of the testcases from deja-gnu to a "tool" subdirectory.
1988 Mon Feb 22 10:27:24 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1990 * objdump.c (dump_data): Free up section contents each time
1991 through the loop. Reported by minyard@bnr.ca.
1993 Sun Feb 21 10:55:55 1993 Mike Werner (mtw@poseidon.cygnus.com)
1995 * binutils/testsuite: Initial creation of binutils/testsuite.
1996 Migrated dejagnu testcases and support files for testing nm to
1997 binutils/testsuite from deja-gnu. These files were moved "as is"
1998 with no modifications. This migration is part of a major overhaul
1999 of dejagnu. The modifications to these testcases, etc., which
2000 will allow them to work with the new version of dejagnu will be
2001 made in a future update.
2003 Fri Feb 12 10:05:20 1993 Fred Fish (fnf@cygnus.com)
2005 * Makefile.in (LIBIBERTY_SRC_DIR, LIBIBERTY_BIN_DIR): New macros.
2006 * Makefile.in (LIBIBERTY): Use LIBIBERTY_BIN_DIR.
2007 * Makefile.in (DEMANGLER_PROG): New program to build. Add macro
2009 * Makefile.in (PROGS): Add DEMANGLER_PROG.
2011 Tue Jan 26 11:56:33 1993 Ian Lance Taylor (ian@cygnus.com)
2013 * copy.c, nm.c, objdump.c, size.c: Use new bfd_is_com_section
2014 macro rather than checking for equality to bfd_com_section.
2016 Fri Jan 8 15:50:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2018 * objdump.c (disassemble_data): Fix code to find first useless
2021 Thu Jan 7 13:13:31 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2023 * objdump.c (disassemble_data): Use mips_print_insn for MIPS.
2024 Don't core dump if bfd_find_nearest_line returns false.
2026 Wed Jan 6 17:14:01 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2028 * objdump.c (disassemble_data): know how to disassemble z8000s
2031 Wed Jan 6 15:16:27 1993 Per Bothner (bothner@cygnus.com)
2033 * arsup.h (interactive), bucomm.h (program_name): Prefix
2034 with 'extern', to avoid warnings from some compilers.
2036 Wed Jan 6 15:14:11 1993 Per Bothner (bothner@rtl.cygnus.com)
2038 * arparse.y: fix unnecessary shift/reduce
2040 Tue Dec 22 15:46:56 1992 Per Bothner (bothner@rtl.cygnus.com)
2042 * Makefile.in: Make check depend on all.
2043 * Makefile.in (distclean): Remove sysdep.h.
2044 * size.c: Use %u format where appropriate.
2045 * objdump.c: Standardize: L_SET -> SEEK_SET.
2046 * objdump.c: Use new macro bfd_asymbol_bfd.
2047 * configure.in: Allow std-host as the default ${mys_host}.
2049 Thu Dec 17 19:38:19 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2051 * Makefile.in: added dvi target, define and use TEXI2DVI
2053 Tue Dec 15 18:05:07 1992 Per Bothner (bothner@cygnus.com)
2055 * Makefile.in (dist): Fix permissions before release.
2056 * size.c: Use bfd_size_type (and long) where appropriate.
2057 * ar.c: Make writing a map the default, to be compatible
2058 with SYSV and Posix.2. Remove some bogus kludges that
2059 handled __.SYMDEF directly.
2062 Mon Nov 9 13:36:53 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2064 * Makefile.in: flex no longer needs the -S flag
2066 Sat Nov 7 15:06:13 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2068 * ar.c (extract_file): utime needs a pointer to a utimbuf
2070 * Makefile.in: handle -I includes better, adding $(BASEDIR)/bfd to
2071 the list (since some of the bfd/hosts/*.h files include other
2072 files from that directory)
2074 Fri Nov 6 00:12:51 1992 John Gilmore (gnu@cygnus.com)
2076 * i960-pinsn.c (MEM_MAX, MEM_SIZ): Set upper bound properly.
2078 Thu Nov 5 03:37:15 1992 John Gilmore (gnu@cygnus.com)
2080 Clean up some old BFD ansification macros.
2082 * arsup.h, bucomm.h, objdump.h: Remove EXFUN from binutils.
2083 It still remains as a local macro in gmalloc.c, which is derived
2084 from some other copy of GNU Malloc somewhere (FIXME).
2086 * ar.c, objdump.c, size.c: Replace EXFUN with PROTO. Make static
2088 * arsup.h: Declare extract_files.
2090 Mon Nov 2 12:42:11 1992 Ian Lance Taylor (ian@cygnus.com)
2092 * ar.c (extract_file): instead of checking USG: if POSIX_UTIME,
2093 use utime and utimbuf structure, otherwise if USE_UTIME use utime
2094 and array of two longs, otherwise use utimes.
2096 Thu Oct 15 13:57:35 1992 Per Bothner (bothner@cygnus.com)
2098 * binutils.tex: Document yesterday's changes to strip and copy.
2100 Wed Oct 14 13:22:14 1992 Per Bothner (bothner@cygnus.com)
2102 * copy.c: Re-do command-line parsing to use getopt_long().
2103 Add long option names. Re-think option letters to be more
2105 * copy.c: New function filter_symbols() for stripping only
2106 debug-symbols and/or local symbols. Use these to support
2107 the previously-missing options of the old FSF strip.
2109 Tue Oct 13 01:24:20 1992 John Gilmore (gnu@cygnus.com)
2111 * configure.in (host): Use ${srcdir}/../bfd/configure.host rather
2112 than repeating a copy of it here.
2114 Wed Oct 7 12:53:52 1992 Ken Raeburn (raeburn@cygnus.com)
2116 * copy.c (main): Even if is_strip, accept -d argument indicating
2117 alternate output format. Needed by gdb for Nindy.
2119 * m68k-pinsn.c (print_insn_arg): Handle new "`" operand type.
2121 Tue Oct 6 16:33:56 1992 Jeffrey Osier (jeffrey@cygnus.com)
2123 * binutils.texi: added documentation for "copy"
2125 Tue Oct 6 14:22:56 1992 Per Bothner (bothner at PersSony)
2127 * Makefile.in (*clean rules): Some cleaning up.
2128 * Makefile.in (dist): Make diststuff in gprof for a dist.
2130 * ar.c (do_show_version): New function.
2131 * ar.c (main): Fix so "ar -V" works.
2133 Thu Oct 1 22:44:45 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2135 * configure.in: now uses the cpu-vendor-os triple instead of
2138 Fri Sep 25 22:41:08 1992 John Gilmore (gnu@cygnus.com)
2140 * i960-pinsn.c: Change bzero to memset.
2141 * sparc-pinsn.c: Change index to strchr.
2143 Mon Sep 21 14:39:56 1992 Ian Lance Taylor (ian@cygnus.com)
2145 * m68k-pinsn (print_insn_arg, fetch_arg): added support for
2146 operands to memory management instructions, from WRS.
2148 Tue Sep 15 15:26:38 1992 Ian Lance Taylor (ian@cygnus.com)
2150 * Makefile.in (install): if $(tooldir) exists, install nm and
2151 strip in $(tooldir)/bin.
2153 Thu Sep 3 11:57:40 1992 Per Bothner (bothner@rtl.cygnus.com)
2155 * Makefile.in: Let's call it version 2.0.
2157 Wed Sep 2 00:25:13 1992 Per Bothner (bothner@rtl.cygnus.com)
2159 * Makefile.in: Bump to version 0.98.
2160 * TODO, README: Minor updates.
2162 * Makefile.in: Added mostlyclean, distclean rules,
2163 and cleaned up clean, realclean.
2165 Sun Aug 30 21:18:59 1992 Ian Lance Taylor (ian@cygnus.com)
2167 * Makefile.in: map program names through program_transform_name
2170 Sun Aug 30 18:09:03 1992 Per Bothner (bothner@rtl.cygnus.com)
2172 * Makefile.in: Bump to versions 1.97.90.
2173 * cplus-dem.c: Removed. Was nowhere used - and if some
2174 programs are changed to to demangling should now use the
2175 versions in libiberty.
2177 Thu Aug 27 12:58:09 1992 Brendan Kehoe (brendan@cygnus.com)
2179 * configure.in: add we32k
2181 Mon Aug 24 14:53:42 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2183 * ar.c (map_over_members): if the element of the archive has a
2184 null name, fill it in.
2186 * nm.c (do_one_rel_file): only warn if a bfd's flags say there
2187 will be symbols and there aren't any.
2189 Wed Aug 19 11:20:25 1992 Ian Lance Taylor (ian@cygnus.com)
2191 * m68k-pinsn.c: handle new operand type 'r', introduced for cas2.
2193 Tue Aug 18 20:45:48 1992 Rob Savoye (rob@cygnus.com)
2195 * nm.c objdump.c: Added support for a +version (-V)
2196 to print the version number.
2198 * ar.c, copy.c: Added support for a -V option to print
2201 Tue Aug 18 13:28:44 1992 Ian Lance Taylor (ian@cygnus.com)
2203 * config/mh-apollo68v: removed -g from CC definition.
2205 * Makefile.in: always create installation directories.
2207 Mon Aug 17 18:33:41 1992 Per Bothner (bothner@rtl.cygnus.com)
2209 * m68k-pinsn.c: Minor fix in style of output (don't use
2210 range to indicate floating point control registers).
2212 Tue Aug 11 23:42:21 1992 Per Bothner (bothner@cygnus.com)
2214 * ar.c (main): Don't *always* set the verbose flag!
2216 Wed Aug 5 11:25:27 1992 Per Bothner (bothner@rtl.cygnus.com)
2218 * copy.c: When is_strip (because it is invoked as the strip
2219 program), follow traditional argv processing:
2220 'strip file1 file2' now strips file1 and file2, rather
2221 than stripping file1 (as input), leaving output in file2.
2223 Mon Jul 27 16:28:08 1992 Per Bothner (bothner@rtl.cygnus.com)
2225 * objdump.c (display_info, display_info_table): Call
2226 bfd_set_format() on dummy bfd before using it (twice).
2227 * ar.c: Make sure archive is created on command 'r'
2228 even when no elements are inserted. (Clean up and
2229 simplify some non-working related code.)
2231 Mon Jul 20 02:48:38 1992 D. V. Henkel-Wallace (gumby@cygnus.com)
2233 * configure.in: hppa support doesn't assume hp OS (from sef).
2235 Sat Jul 18 14:35:22 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2237 * configure.in: recognize hppa hosts (bsd & hpux), error messages
2238 to stderr, not stdout
2240 Fri Jul 17 18:39:44 1992 K. Richard Pixley (rich@rtl.cygnus.com)
2242 * ar.1, binutils.texi, i960-pinsn.c, nm.1, objdump.1, ranlib.1,
2243 size.1, sparc-pinsn.c, strip.1: removed rcsid's.
2245 Thu Jul 16 16:55:24 1992 K. Richard Pixley (rich@rtl.cygnus.com)
2247 * Makefile.dos: removed rcsid.
2249 Thu Jul 16 08:23:07 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2251 * objdump.c (display_bfd): print state of BFD_IS_RELAXABLE too
2253 Tue Jun 30 20:26:15 1992 D. V. Henkel-Wallace (gumby@cygnus.com)
2255 * Makefile.in: Add program_suffix (parallel to program_prefix)
2257 Thu Jun 25 04:52:45 1992 John Gilmore (gnu at cygnus.com)
2259 * nm.c (sorters): Lint. Remove excess whitespace.
2261 Wed Jun 24 13:48:07 1992 Per Bothner (bothner@cygnus.com)
2263 * nm.c (valueof macro): Add missing parentheses.
2264 (Their lack screwed up numeric_forward().)
2266 Sun Jun 14 10:33:27 1992 John Gilmore (gnu at cygnus.com)
2268 * objdump.c (dump_elf_stabs): Also dump .stab.index and
2269 .stab.excl sections.
2270 (dump_elf_stabs_1): Split out main body of old dump_elf_stabs.
2271 * objdump.1, binutils.texi: Document new sections dumped.
2273 Fri Jun 12 22:23:35 1992 John Gilmore (gnu at cygnus.com)
2275 * size.c, objdump.c, bucomm.c: Lint.
2277 Thu Jun 11 01:19:06 1992 John Gilmore (gnu at cygnus.com)
2279 * objdump.c (dump_elf_stabs): New feature: --stabs prints out a
2280 .stab section from an ELF file. Installed under #ifdef
2281 ELF_STAB_DISPLAY so it can be easily disabled, since it requires
2282 bfd-internals header files and such.
2283 * objdump.1, binutils.texi: Update for --stabs. Also fix
2284 objdump's doc to use -- rather than + for long options.
2285 (FIXME: Not yet fixed everywhere in binutils.texinfo.)
2287 Wed Jun 10 07:53:24 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2289 * objdump.c(display_info), patches from
2290 mohring@informatik.tu-muenchen.de to print the table much more
2293 Thu May 28 13:36:16 1992 Per Bothner (bothner@rtl.cygnus.com)
2295 * objdump.c: Add another enum->int cast, for the sake of
2296 old compilers (such as PCC).
2298 Wed May 27 13:01:44 1992 Per Bothner (bothner@rtl.cygnus.com)
2300 * arlex.l: Don't include <sysdep.h> (unneeded conflicts).
2301 Add declaration of strdup().
2303 Fri May 22 13:40:37 1992 Per Bothner (bothner@cygnus.com)
2305 * Makefile.in: Use srcdir instead of VPATH in ldgram/ldlex
2306 rules, since these are used when building a distribution.
2307 * Makefile.in (arlex.c): Don't re-direct output, since that
2308 leaves a bogus output files if it fails.
2310 * arlex.l: Make work with lex, for what it's worth.
2311 * Makefile.in: Better lex support.
2312 * Makefile.in (dist): Generate flex and bison outputs
2315 Thu May 14 17:17:59 1992 K. Richard Pixley (rich@rtl.cygnus.com)
2317 * Makefile.in: get BISON definition right.
2319 Fri May 8 07:47:08 1992 K. Richard Pixley (rich@cygnus.com)
2321 * sanity.sh: default TMPDIR to ".".
2323 Thu May 7 12:34:50 1992 Roland H. Pesch (pesch@fowanton.cygnus.com)
2325 * binutils.texi: add doc for ar command language.
2327 Wed May 6 18:05:36 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2329 * arparse.y: make END call ar_end
2330 * arsup.c (ar_end): added, deletes temp file if archive session
2334 Wed May 6 11:08:53 1992 K. Richard Pixley (rich@rtl.cygnus.com)
2336 * Makefile.in: use bison & flex from ../ if they exist. Also,
2339 * sanity.sh: remove temporary directory when finished.
2341 Tue May 5 12:00:58 1992 Per Bothner (bothner@rtl.cygnus.com)
2343 * Makefile.in: Bump to version 1.97.
2344 * ar.c: Declare errno for machines that need it.
2346 Mon May 4 23:29:51 1992 John Gilmore (gnu@cygnus.com)
2348 * objdump.c (display_info): Handle error cases without coredump.
2349 Close the dummy temporary file we open in the loop.
2350 * Makefile.in (arsup.o): Add kludge to build with Sun Make.
2352 Fri May 1 16:20:23 1992 K. Richard Pixley (rich@cygnus.com)
2354 * Makefile.in: added test-install target.
2356 * sanity.sh: new file.
2358 * Makefile.in: use sanity test on make check.
2360 Tue Apr 21 13:38:37 1992 K. Richard Pixley (rich@cygnus.com)
2362 * Makefile.in: rework CFLAGS so that they can be passed on the
2363 command line to make. Remove MINUS_G. Default CFLAGS to -g.
2365 Wed Apr 15 14:33:07 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2367 * arsup.c, arsup.h, arparse.y, arlex.l: support for archive
2370 Fri Mar 6 21:54:53 1992 K. Richard Pixley (rich@cygnus.com)
2372 * Makefile.in: added check target.
2374 Thu Mar 5 21:35:49 1992 K. Richard Pixley (rich@cygnus.com)
2376 * Makefile.in: added clean-info target.
2378 Tue Mar 3 15:36:37 1992 K. Richard Pixley (rich@rtl.cygnus.com)
2380 * Makefile.in: remove $(COPY_PROG) from PROGS. It shouldn't be
2381 installed. added tooldir and program_prefix.
2383 Wed Feb 26 18:04:40 1992 K. Richard Pixley (rich@cygnus.com)
2385 * Makefile.in, configure.in: removed traces of namesubdir,
2386 -subdirs, $(subdir), $(unsubdir), some rcs triggers. Forced
2387 copyrights to '92, changed some from Cygnus to FSF.
2389 Sun Feb 16 12:53:02 1992 Per Bothner (bothner at cygnus.com)
2391 * Makefile.in: Bump version to 1.96, and remove -beta
2392 suffix from distribution name.
2393 * m68k-pinsn.c: New macro COERCE_SIGNED_CHAR to extract
2394 the signed value of a character (even if chars are unsigned).
2395 * sparc-pinsn.c: Add new operand types.
2397 Thu Feb 6 12:14:19 1992 Steve Chamberlain (sac at rtl.cygnus.com)
2399 * objdump.c (disassemble_data): don't print a section's contents
2400 if it's not loadable (eg bss)
2402 Tue Jan 28 11:11:06 1992 Steve Chamberlain (sac at rtl.cygnus.com)
2404 * m68k-pinsn.c (print_insn_arg): fixed so that -ve branch
2405 displacements don't get printed as large +ve ones.
2407 Fri Jan 24 14:47:53 1992 Steve Chamberlain (sac at rtl.cygnus.com)
2409 * copy.c, nm.c, objdump.c, size.c : changed to use the
2413 Mon Dec 30 18:34:41 1991 Per Bothner (bothner at cygnus.com)
2415 * bucomm.c (print_arelt_descr): Tweek the output format
2416 so that 'ar tv' output follows Posix 1003.2/D11.
2417 Output is now also identical to Sun's (except __.SYMDEF).
2419 Mon Dec 30 06:09:53 1991 John Gilmore (gnu at cygnus.com)
2421 * Makefile.in: Make `make' output more readable.
2423 Wed Dec 18 15:04:45 1991 Per Bothner (bothner at cygnus.com)
2425 * Makefile.in: Bump to version 1.94.
2427 Wed Dec 11 16:48:09 1991 Steve Chamberlain (sac at cygnus.com)
2429 * ar.c: added "b" to fopens for dos
2430 * configdj.bat, makefile.dos new files from DJ
2432 Tue Dec 10 04:07:26 1991 K. Richard Pixley (rich at rtl.cygnus.com)
2434 * Makefile.in: infodir belongs in datadir.
2436 Sat Dec 7 17:09:37 1991 Steve Chamberlain (sac at rtl.cygnus.com)
2438 * bucomm.h: created to hold prototypes of bucomm.c
2439 * objdump.h: created to hold prototyes of objdump.c
2440 * am29k-pinsn.c: include objdump.h
2441 * ar.c: include bucomm.h, get ar.h from the right place and
2443 * bucomm.c: defunize bfd_fatal
2444 * copy.c: include bucomm.h, lint.
2445 * i960-pinsn.h: include bucomm.h
2446 * m68k-pinsn.h: lint
2447 * nm.c: include bucomm.h, lint
2449 * sparc-pinsn.c: include objdump.h
2453 Fri Dec 6 23:02:14 1991 K. Richard Pixley (rich at rtl.cygnus.com)
2455 * Makefile.in: added standards.text support. install using
2456 INSTALL_PROGRAM and INSTALL_DATA.
2458 * configure.in: configure now does all of it's work from objdir so
2459 make file existence tests against ${srcdir}.
2461 Thu Dec 5 22:46:22 1991 K. Richard Pixley (rich at rtl.cygnus.com)
2463 * Makefile.in: idestdir and ddestdir go away. Added copyrights
2464 and shift gpl to v2. Added ChangeLog if it didn't exist. docdir
2465 and mandir now keyed off datadir by default.
2467 Wed Dec 4 22:42:03 1991 Per Bothner (bothner at cygnus.com)
2469 * Makefile.in: Bump to version 1.93.
2470 * Makefile.in: Add make-strip.o:maybe-strip.c dependency
2471 for make versions that provide half-baked VPATH-support (e.g. Sun's).
2472 * size.c: Improvements suggested by
2473 "david d [zoo] zuhn" <zoo@aps1.spa.umn.edu>:
2474 - Don't emit (Berkeley) headers if no files were found.
2475 - Return a non-zero return code on failure.
2477 Sat Nov 30 21:34:19 1991 Steve Chamberlain (sac at rtl.cygnus.com)
2479 Changes due to include file renaming:
2480 * am29k-pinsn.c: a29k-opcode.h -> opcode/a29k.h
2481 * sparc-pinsn.c: sparc-opcode.h -> opcode/sparc.h
2482 * m68k-pinsn.c: m68k-opcode.h -> opcode/m68k.h
2483 * nm.c: stab.gnu.h -> aout/stab_gnu.h
2485 Tue Nov 19 19:20:43 1991 Per Bothner (bothner at cygnus.com)
2487 * README: Mention MINIMIZE flag for bfd's make.
2489 Mon Nov 18 12:05:37 1991 Per Bothner (bothner at cygnus.com)
2491 * README: Various improvements.
2493 Sun Nov 17 23:40:59 1991 Per Bothner (bothner at cygnus.com)
2495 * Makefile.in: Bump to version 1.92.
2496 * version.c, Makefile.in: Get version string from Makefile.
2497 * copy.c, is-strip.c, not-strip.c, maybe-strip.c, Makefile.in:
2498 Make the same change that we earlier did for ar/ranlib:
2499 Generate two different binaries for strip and copy and use
2500 a global variable with different values to distinguish
2501 ostrip from copy. (-1 means to use argv[0] to decide,
2502 so you can get the old behavior, but it is no longer the default).
2503 * copy.c (copy_file): Set EXEC_P of output bfd if input is so.
2504 * copy.c (main): If is_strip==-1, compare last 5 chars
2505 of argv[0], not the whole path.
2506 * copy.c (main): Return 0, not 1.
2507 * copy.c (setup_sections): Fix due to change in bfd_make_section
2508 now failing if asked for a duplicate section.
2509 * strip.c, ostrip.c: Removed obsolete files.
2510 * ar.c, not-ranlib.c, maybe-ranlib.c:
2511 Change encoding of is_ranlib variable to be consistent
2512 with is_strip for strip.copy (i.e -1 to means use argv[0]).
2514 Thu Nov 14 20:11:02 1991 Per Bothner (bothner at cygnus.com)
2516 * version.c (program_version): Update to version 1.92.
2518 Tue Nov 12 16:17:53 1991 Per Bothner (bothner at cygnus.com)
2520 * ar.c (get_pos_bfd): Previous fix was missing a "break".
2522 Thu Nov 7 08:55:56 1991 Steve Chamberlain (sac at cygnus.com)
2524 * am29k-pinsn.c: Fixed bug in mtacc, dmac and fmac instruction
2525 encodings. (Thaks to David Wood)
2527 Sun Nov 3 14:50:23 1991 Per Bothner (bothner at cygnus.com)
2529 * Makefile.in ($(DIST_NAME).tar.Z), TODO: Various fixes.
2530 * ar.c (get_pos_bfd): Fix to handling of before/after
2531 positioning options.
2532 * bucomm.c (fatal): MISSING_VFPRINTF is no longer an issue,
2533 since libiberty contains vfprintf etc if otherwise missing.
2534 * m68k-pinsn.c (print_insn_arg): Support BB/BW/BL
2535 type operands, as used by branch instructions.
2536 * nm.c: Delegate printing of symbols to BFD,
2537 by using bfd_print_symbol to do the formatting.
2539 Mon Oct 28 11:20:47 1991 Steve Chamberlain (steve at cygnus.com)
2541 * ar.c (write_archive.c): added unlink before rename since some
2542 systems can't rename onto an existant file.
2544 Mon Oct 21 09:47:23 1991 Steve Chamberlain (steve at rtl.cygnus.com)
2546 * nm.c: now doesn't crash if a symbol with no section and no
2549 Thu Oct 17 15:25:50 1991 Per Bothner (bothner at cygnus.com)
2551 * Makefile.in, version.c: Bump to version 1.91.
2553 Wed Oct 16 11:45:36 1991 Per Bothner (bothner at cygnus.com)
2555 * Makefile.in, ar.c, bucomm.c, copy.c, cplus-dem.c, filemode.c,
2556 i960-pinsn.c, m68k-pinsn.c, nm.c, objdump.c, size.c, sparc-pinsn.c,
2557 * strip.c: Add or update Copyright notice.
2558 * TODO: Add note on 'nm -a'.
2559 * version.c: Update version number to 1.90.
2560 * Makefile.in: Fix making of documentation for dist.
2562 Tue Oct 15 00:17:17 1991 Per Bothner (bothner at cygnus.com)
2565 * Makefile.in: New kludgy rules for making a tarfile.
2566 * Makefile.in: Fix bindir path.
2568 Mon Oct 14 17:34:29 1991 Roland H. Pesch (pesch at cygnus.com)
2570 * Makefile.in: add targets binutils.mm, binutils.me
2572 Fri Oct 11 22:44:21 1991 John Gilmore (gnu at cygnus.com)
2574 * Makefile.in: Avoid Sun Make VPATH bugs by adding dependencies.
2576 Fri Oct 11 12:51:33 1991 Roland H. Pesch (pesch at cygnus.com)
2578 * Makefile.in: add target "binutils.ms"
2580 * binutils.texinfo: minor restructuring for texi2roff comfort.
2582 Fri Oct 11 04:12:28 1991 John Gilmore (gnu at cygnus.com)
2584 Restructure configuration scheme for bfd, binutils, ld.
2586 * include/sys/h-*.h: Move to bfd/hosts/h-*.h.
2587 * configure.in: Revise to symlink sysdep.h to ../bfd/hosts/h-xxx.h.
2588 Change some config names to match other dirs.
2589 * *.c: Include bfd.h before sysdep.h, so ansidecl and PROTO()
2591 * Makefile.in: Use -I. to get sysdep.h.
2593 Wed Oct 9 22:42:56 1991 Per Bothner (bothner at cygnus.com)
2595 * nm.c (print_symbols): Handle NULL name field of symbol.
2596 * Makefile.in: Removed spurious comment.
2598 Tue Oct 8 16:55:03 1991 Roland H. Pesch (pesch at cygnus.com)
2600 * binutils.texinfo: minor typos, phrasing, formatting fixes.
2602 Tue Oct 8 15:13:20 1991 Per Bothner (bothner at cygnus.com)
2604 * configure.in: Get host file from ../bfd/config, not config.
2605 * config/*: Remove config directory and its files.
2607 Tue Oct 8 13:58:59 1991 Roland H. Pesch (pesch at cygnus.com)
2609 * Makefile.in: new targets binutils.dvi, binutils.info
2611 * binutils.texinfo: remove most remaining FIXME's, delete
2612 references to __.SYMDEF by name
2615 Tue Oct 8 10:23:44 1991 Steve Chamberlain (steve at cygnus.com)
2617 * objdump.c (print_address) Print addresses nicely.
2619 Mon Oct 7 11:31:05 1991 Per Bothner (bothner at cygnus.com)
2621 * ar.c, Makefile.in, new files {is,not,maybe}-ranlib.c:
2622 Make two different binaries for ar and ranlib, instead of
2623 distinguishing them at run time using argv[0].
2624 (Old behavior is still available if you "make ar_with_ranlib",
2625 but it is not the default.)
2626 * ranlib.sh (new): An alternative one-line
2627 shell implementation of ranlib.
2629 Fri Oct 4 21:49:44 1991 John Gilmore (gnu at cygnus.com)
2631 * objdump.c: Cope with renames of a few BFD types & enums.
2633 Fri Oct 4 19:08:09 1991 Roland H. Pesch (pesch at cygnus.com)
2635 * binutils.texinfo: add new file (rudimentary docn)
2637 Mon Sep 30 12:30:39 1991 Per Bothner (bothner at cygnus.com)
2639 * config/hmake-news: Add new file (for Sony NEWSOS3).
2640 * bucomm.c (fatal): Conditionally compile fatal() depending on
2641 MISSING_VFPRINTF, and don't confuse the issue with NO_VARARGS.
2642 * objdump.c (dump_headers): Trivial output format change.
2643 * objdump.c (display_info): Loop over integers, not enums,
2644 to appease old compilers.
2646 Mon May 20 16:14:07 1991 Steve Chamberlain (steve at cygint.cygnus.com)
2648 *objdump.c *nm.c *copy.c :hanged some types to work with 64 bit object files
2650 Thu May 16 16:06:55 1991 Steve Chamberlain (steve at cygint.cygnus.com)
2652 * objdump.c (print_address): Make disasembled output more
2653 consistent with gdb and as: Add 0x when printing hex.
2654 Don't print extra leading zeros.
2655 Attempt to not print "filename.o".
2656 * objdump.c: Add some enum-to-int casts to accomodate old compilers.
2659 Fri May 3 22:21:44 1991 John Gilmore (gnu at cygint.cygnus.com)
2661 * copy.c: Change =& constructs to = &, since they confuse older
2669 version-control: never